loose furniture catalogue - atlas contract furniture€¦ · atlas contract furniture - loose...
TRANSCRIPT
COPYRIGHT © 2018 ATLAS CONTRACT FURNITURE
LOOSE FURNITURE CATALOGUE
Issue B
Page 2 Page 3
PART A
Side ChairsSection 1
ArmchairsSection 2
High StoolsSection 3
Miscellaneous SeatingSection 4
Coffee Height Tables and BasesSection 5
Dining Height Tables and BasesSection 6
Poseur Height Tables and BasesSection 7
Stock Table TopsSection 8
Atlas Bespoke Table TopsSection 9
PART B
Side ChairsSection 1
ArmchairsSection 2
High StoolsSection 3
Miscellaneous SeatingSection 4
Coffee Height Tables and BasesSection 5
Dining Height Tables and BasesSection 6
Poseur Height Tables and BasesSection 7
Stock Table TopsSection 8
INDOOR productsAssortment of products suitable for indoor contract use.
OUTDOOR productsContract furniture products designed for outdoor use.
7 - 23
25 - 38
39 - 50
51 - 53
55 - 61
63 - 73
75 - 82
83 - 89
91 - 95
97 - 101
103 - 107
109 - 111
113 - 114
115 - 116
117 - 120
121 - 122
123 - 126
KEY READS
Catalogue GuideSection 1
Product Keys and TerminologySection 2
Atlas Bespoke Banquette SeatingSection 3
GETTING startedHow to use the Atlas Loose Furniture Catalogue.
4
5
127 - 130
EXCEPTIONAL CONTRACT FURNITURE
Atlas Contract Furniture is one of the UK’s most experienced manufacturers of contract furniture and banquette seating, providing an unmatched level of service.
DisclaimerNote that product information and availability are correct at the time of print. Atlas is not liable for changes to specification, nor the discontinuation of products implemented by the supplier.
These may be subject to change without prior warning.
TERMS of usePlease see full Terms and Conditions for further details.
Terms and ConditionsAppendix 1 131 - 136
Page 4 Page 5
Our PromiseAtlas Contract Furniture are in-house manufacturers of the highest quality banquette seating. We also offer an array of loose furniture products from reputable manufacturers based in Europe and beyond; selected with quality, reliability and design specifically in mind. Frames are readily available in a selection of given stock finishes.
BespokeFor something more bespoke, Atlas offer additional customisation utilising in-house spray and upholstery facilities operating to high contract standards. Please do not hesitate to contact us for a quote.
Product Enquiries and MoreFor product enquiries, layout advice, or to discuss your next project - please get in touch with a member of our friendly sales team.
Lead TimesLead times and delivery for loose furniture products are subject to the terms of the manufacturer.
Note that these can exceed the time-scales for products manufactured on our premises, therefore timely ordering of loose furniture products is critical.
WarrantiesWarranties are given on a product specific basis. For further details and product enquiries, do not hesitate to contact us. We can also assist with layout advice where required.
Other ProductsLooking for something else? Our range is always being updated; please enquire for recommendations and other products.
A GUIDE TO ATLAS LOOSE FURNITUREContract grade products for both indoors and outdoors - a range to cover every project.
PRODUCT KEYS AND TERMINOLOGYHow to interpret critical dimensions and product information.
BASICS
Sections and Product EnvironmentIndoor - Recommended for indoor use only (refer to blue page number tabs).Outdoor - Suitable for indoor and outdoor use (refer to green page number tabs).
Miscellaneous Products - Lounge chairs, low stools, high chairs, modular units, etc.
TABLE AND BASE TERMS
Table Heights GuideOur recommendations for table base heights.
Coffee Height Tables and BasesBetween 400 mm and 600 mm
Dining Height Tables and BasesBetween 725 mm and 740 mm
Poseur Height Tables and BasesBetween 1020 mm and 1040 mm.
SEATING KEY
BH Back Height
SH Seat Height
SD Seat Depth
SW Seat Width
AH Arm Height(Armchairs Only)
TABLE AND BASE KEY
BH Base Height
BD Base Depth
BW Base Width
Max. D Maximum Diameter
Max. S Maximum Square(Or Rectangular)
SEATING TERMS
Upholstered Yes - This product is upholstered.No - This product is not upholstered.Available - Models available in both options.
StackingYes - This product stacks.No - This product does not stack.Qty. - Maximum number of stacking products.Available - Models available in both options.
Finishes AvailableYes - Available in other stock finishes.No - Not available in other stock finishes
Base Type
3 Leg, 4 Leg, 5 Leg, Round, Square, Rectangular, Twin Pedestal.
Flip TopYes - Top can be flipped for easy storage.No - Top can not be flipped.
TABLES TOP TERMS
Shape Round, Square, Rectangular.
Thickness The overall thickness of the table top
TABLE TOP KEY
CM Core Material(Table Top Inner Construction)
Page 6
INDOOR side chairsPart A - Section 1
Spy Armchair - See Page 36
INDOOR side chairsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 1
Page 8 Page 9
A-0133FEG-S-2
BH 900 mmSW 475 mmSH 510 mm
SD 560 mm
Stacking NoUpholstered Yes
A-0253FEG-S-5
BH 945 mmSW 420 mmSH 480 mm
SD 500 mm
Stacking NoUpholstered Yes
A-0501FEG-S-9
BH 795 mmSW 445 mmSH 465 mm
SD 535 mm
Stacking YesUpholstered No
A-0537FEG-S-10
BH 870 mmSW 460 mmSH 485 mm
SD 460 mm
Stacking AvailableUpholstered Yes
A-0542FEG-S-11
BH 790 mmSW 450 mmSH 490 mm
SD 480 mm
Stacking NoUpholstered Yes
A-0728FEG-S-13
BH 860 mmSW 460 mmSH 480 mm
SD 535 mm
Stacking NoUpholstered Yes
A-0811FEG-S-15
BH 875 mmSW 480 mmSH 480 mm
SD 520 mm
Stacking NoUpholstered Yes
A-0951FEG-S-18
BH 965 mmSW 470 mmSH 480 mm
SD 545 mm
Stacking NoUpholstered Yes
A-10FEG-S-20
BH 885 mmSW 440 mmSH 490 mm
SD 535 mm
Stacking NoUpholstered Available
A-1102FEG-S-22
BH 860 mmSW 510 mmSH 490 mm
SD 500 mm
Stacking NoUpholstered Yes
A-1107FEG-S-25
BH 830 mmSW 430 mmSH 480 mm
SD 510 mm
Stacking NoUpholstered Yes
A-1209FEG-S-29
BH 835 mmSW 450 mmSH 500 mm
SD 530 mm
Stacking NoUpholstered Yes
A-1222FEG-S-33
BH 885 mmSW 420 mmSH 480 mm
SD 575 mm
Stacking NoUpholstered Yes
A-1260FEG-S-35
BH 820 mmSW 425 mmSH 460 mm
SD 470 mm
Stacking NoUpholstered Available
A-14FEG-S-37
BH 880 mmSW 410 mmSH 460 mm
SD 540 mm
Stacking NoUpholstered Available
A-1406FEG-S-39
BH 870 mmSW 465 mmSH 460 mm
SD 470 mm
Stacking NoUpholstered Available
A-1411FEG-S-41
BH 855 mmSW 495 mmSH 490 mm
SD 540 mm
Stacking NoUpholstered Yes
A-1412FEG-S-42
BH 855 mmSW 495 mmSH 490 mm
SD 540 mm
Stacking NoUpholstered Yes
INDOOR side chairsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 1
Page 10 Page 11
A-1609FEG-S-47
BH 790 mmSW 430 mmSH 490 mm
SD 480 mm
Stacking NoUpholstered Yes
A-165FEG-S-48
BH 775 mmSW 415 mmSH 460 mm
SD 470 mm
Stacking NoUpholstered Available
A-18FEG-S-51
BH 880 mmSW 420 mmSH 460 mm
SD 540 mm
Stacking NoUpholstered Available
A-225FEG-S-54
BH 785 mmSW 440 mmSH 490 mm
SD 455 mm
Stacking NoUpholstered Yes
A-31FEG-S-57
BH 875 mmSW 450 mmSH 490 mm
SD 540 mm
Stacking NoUpholstered Available
A-372FEG-S-58
BH 900 mmSW 450 mmSH 460 mm
SD 470 mm
Stacking NoUpholstered No
A-4FEG-S-60
BH 880 mmSW 400 mmSH 460 mm
SD 570 mm
Stacking NoUpholstered Available
A-5910FEG-S-61
BH 850 mmSW 435 mmSH 460 mm
SD 510 mm
Stacking NoUpholstered No
A-751FEG-S-63
BH 835 mmSW 455 mmSH 470 mm
SD 480 mm
Stacking YesUpholstered No
A-788 FANFEG-S-64
BH 795 mmSW 450 mmSH 460 mm
SD 485 mm
Stacking NoUpholstered Available
A-788 VERTFEG-S-65
BH 795 mmSW 450 mmSH 490 mm
SD 485 mm
Stacking NoUpholstered Available
A-8223FEG-S-68
BH 840 mmSW 430 mmSH 460 mm
SD 460 mm
Stacking NoUpholstered Available
A-8810FEG-S-69
BH 845 mmSW 430 mmSH 490 mm
SD 470 mm
Stacking NoUpholstered Available
A-8810FEG-S-71
BH 830 mmSW 460 mmSH 460 mm
SD 470 mm
Stacking NoUpholstered Available
A-9008FEG-S-76
BH 870 mmSW 450 mmSH 460 mm
SD 535 mm
Stacking NoUpholstered No
A-9203FEG-S-77
BH 800 mmSW 470 mmSH 480 mm
SD 470 mm
Stacking NoUpholstered Yes
A-9204FEG-S-78
BH 800 mmSW 470 mmSH 480 mm
SD 470 mm
Stacking NoUpholstered Yes
A-9416FEG-S-79
BH 950 mmSW 470 mmSH 500 mm
SD 610 mm
Stacking NoUpholstered Yes
INDOOR side chairsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 1
Page 12 Page 13
A-9866FEG-S-87
BH 970 mmSW 455 mmSH 480 mm
SD 550 mm
Stacking NoUpholstered Yes
A-9907FEG-S-89
BH 860 mmSW 450 mmSH 460 mm
SD 525 mm
Stacking NoUpholstered Available
Ako IIMVA-S-2
BH 840 mmSW 460 mmSH 460 mm
SD 470 mm
Stacking NoUpholstered Yes
Albert OneATO-S-15
BH 790 mmSW 540 mmSH 480 mm
SD 550 mm
Stacking NoUpholstered Yes
AliasCIN-S-16
BH 820 mmSW 540 mmSH 490 mm
SD 610 mm
Stacking NoUpholstered Yes
AliceGAL-S-3
BH 820 mmSW 445 mmSH 460 mm
SD 510 mm
Stacking NoUpholstered No
AllureATO-S-24
BH 800 mmSW 440 mmSH 460 mm
SD 500 mm
Stacking NoUpholstered Yes
AloeATO-S-20
BH 810 mmSW 480 mmSH 480 mm
SD 530 mm
Stacking AvailableUpholstered Yes
Alto Side ChairGDE-S-2
BH 825 mmSW 440 mmSH 500 mm
SD 540 mm
Stacking NoUpholstered Yes
AnitaGER-S-2
BH 850 mmSW 440 mmSH 460 mm
SD 465 mm
Stacking 5Upholstered Available
ArtùATO-S-8
BH 840 mmSW 510 mmSH 480 mm
SD 540 mm
Stacking NoUpholstered Yes
AsuncionCAS-S-1
BH 790 mmSW 440 mmSH 490 mm
SD 380 mm
Stacking NoUpholstered Yes
BahiaCAS-S-3
BH 950 mmSW 540 mmSH 490 mm
SD 410 mm
Stacking NoUpholstered Yes
Belmonte 4CAS-S-4
BH 750 mmSW 520 mmSH 470 mm
SD 400 mm
Stacking YesUpholstered Yes
BettinaMNA-S-2
BH 780 mmSW 490 mmSH 460 mm
SD 420 mm
Stacking NoUpholstered Yes
Bosun SidechairWCT-S-18
BH 765 mmSW 520 mmSH 460 mm
SD 520 mm
Stacking NoUpholstered No
CamilleMNA-S-3
BH 840 mmSW 505 mmSH 470 mm
SD 450 mm
Stacking NoUpholstered Yes
CanterburyGAL-S-2
BH 915 mmSW 475 mmSH 470 mm
SD 495 mm
Stacking NoUpholstered Yes
INDOOR side chairsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 1
Page 14 Page 15
Chair Cordoba 610TON-S-21
BH 820 mmSW 460 mmSH 455 mm
SD 440 mm
Stacking NoUpholstered Available
Chair Dejavu 054TON-S-23
BH 900 mmSW 395 mmSH 460 mm
SD 405 mm
Stacking NoUpholstered Available
Chair Dejavu 378TON-S-24
BH 865 mmSW 405 mmSH 460 mm
SD 405 mm
Stacking NoUpholstered Available
Chair MeranoTON-S-3
BH 790 mmSW 440 mmSH 470 mm
SD 425 mm
Stacking NoUpholstered Available
Chair PuntonTON-S-26
BH 755 mmSW 400 mmSH 480 mm
SD 400 mm
Stacking NoUpholstered Available
Chair SplitTON-S-7
BH 800 mmSW 467 mmSH 480 mm
SD 466 mm
Stacking NoUpholstered Available
Chair StockholmTON-S-12
BH 830 mmSW 405 mmSH 490 mm
SD 380 mm
Stacking NoUpholstered Available
Chair TramTON-S-10
BH 840 mmSW 485 mmSH 460 mm
SD 390 mm
Stacking NoUpholstered Available
ClaraATO-S-21
BH 990 mmSW 480 mmSH 500 mm
SD 500 mm
Stacking NoUpholstered Yes
ColtCIN-S-8
BH 880 mmSW 520 mmSH 480 mm
SD 580 mm
Stacking NoUpholstered Yes
CoolMVA-S-14
BH 770 mmSW 455 mmSH 465 mm
SD 540 mm
Stacking NoUpholstered Available
CoqueMNA-S-5
BH 790 mmSW 590 mmSH 460 mm
SD 440 mm
Stacking NoUpholstered No
CoqueMNA-S-6
BH 790 mmSW 590 mmSH 470 mm
SD 440 mm
Stacking NoUpholstered Yes
CroissantBNI-S-11
BH 760 mmSW 490 mmSH 480 mm
SD 420 mm
Stacking NoUpholstered Yes
CurveMNA-S-8
BH 815 mmSW 505 mmSH 480 mm
SD 450 mm
Stacking NoUpholstered Yes
DohaCAS-S-9
BH 800 mmSW 460 mmSH 470 mm
SD 420 mm
Stacking NoUpholstered Yes
DollBNI-S-8
BH 780 mmSW 500 mmSH 450 mm
SD 430 mm
Stacking NoUpholstered Available
EchoMIL-S-4
BH 830 mmSW 630 mmSH 460 mm
SD 530 mm
Stacking 4Upholstered Available
INDOOR side chairsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 1
Page 16 Page 17
EcoleAEC-S-9
BH 830 mmSW 510 mmSH 460 mm
SD 480 mm
Stacking 6Upholstered No
ElisaATO-S-17
BH 730 mmSW 490 mmSH 470 mm
SD 490 mm
Stacking NoUpholstered Available
EllieMNA-S-9
BH 850 mmSW 430 mmSH 470 mm
SD 410 mm
Stacking NoUpholstered Yes
FlintMIL-S-10
BH 810 mmSW 530 mmSH 480 mm
SD 530 mm
Stacking NoUpholstered Available
ForliGDE-S-5
BH 755 mmSW 495 mmSH 455 mm
SD 500 mm
Stacking NoUpholstered Yes
FridaATO-S-4
BH 800 mmSW 510 mmSH 470 mm
SD 540 mm
Stacking YesUpholstered Available
GlowMVA-S-4
BH 830 mmSW 520 mmSH 475 mm
SD 600 mm
Stacking NoUpholstered Yes
GordonaGDE-S-6
BH 800 mmSW 470 mmSH 470 mm
SD 535 mm
Stacking NoUpholstered Available
Grace SidechairWCT-S-12
BH 860 mmSW 470 mmSH 480 mm
SD 560 mm
Stacking NoUpholstered Yes
HarrowGAL-S-12
BH 820 mmSW 425 mmSH 440 mm
SD 520 mm
Stacking NoUpholstered Available
HayaMVA-S-7
BH 825 mmSW 460 mmSH 460 mm
SD 560 mm
Stacking NoUpholstered Yes
HerningCAS-S-13
BH 740 mmSW 500 mmSH 450 mm
SD 330 mm
Stacking NoUpholstered Yes
HippyBNI-S-14
BH 770 mmSW 520 mmSH 490 mm
SD 400 mm
Stacking NoUpholstered Yes
KlappAET-S-19
BH 780 mmSW 460 mmSH 460 mm
SD 490 mm
Stacking YesUpholstered No
LineAIA-S-1
BH 800 mmSW 500 mmSH 460 mm
SD 500 mm
Stacking NoUpholstered Yes
London 2 TubeCIN-S-13
BH 820 mmSW 540 mmSH 490 mm
SD 610 mm
Stacking NoUpholstered Yes
LorraineCAS-S-14
BH 880 mmSW 520 mmSH 480 mm
SD 410 mm
Stacking NoUpholstered Yes
LouvreCIN-S-2
BH 840 mmSW 540 mmSH 490 mm
SD 610 mm
Stacking NoUpholstered Yes
INDOOR side chairsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 1
Page 18 Page 19
M3065MXI-S-29
BH 820 mmSW 450 mmSH 430 mm
SD 450 mm
Stacking NoUpholstered Yes
M3090MXI-S-24
BH 790 mmSW 510 mmSH 450 mm
SD 470 mm
Stacking NoUpholstered Yes
M3156MXI-S-30
BH 850 mmSW 510 mmSH 450 mm
SD 550 mm
Stacking NoUpholstered Yes
M3276MXI-S-32
BH 860 mmSW 430 mmSH 450 mm
SD 550 mm
Stacking NoUpholstered Yes
M3278MXI-S-10
BH 920 mmSW 530 mmSH 450 mm
SD 600 mm
Stacking NoUpholstered Yes
M3282MXI-S-7
BH 830 mmSW 440 mmSH mm
SD 600 mm
Stacking NoUpholstered Yes
M3290MXI-S-26
BH 710 mmSW 640 mmSH 450 mm
SD 570 mm
Stacking NoUpholstered Yes
M3386MXI-S-12
BH 780 mmSW 530 mmSH 450 mm
SD 420 mm
Stacking NoUpholstered Yes
M4232MXI-S-18
BH 870 mmSW 570 mmSH 450 mm
SD 550 mm
Stacking NoUpholstered Yes
M5018MXI-S-21
BH 800 mmSW 500 mmSH 450 mm
SD 440 mm
Stacking NoUpholstered Yes
M5068MXI-S-17
BH 800 mmSW 530 mmSH 450 mm
SD 450 mm
Stacking NoUpholstered Yes
ManausCAS-S-15
BH 930 mmSW 530 mmSH 460 mm
SD 420 mm
Stacking NoUpholstered Yes
MargotAEC-S-5
BH 890 mmSW 440 mmSH 470 mm
SD 540 mm
Stacking NoUpholstered Available
MartaMNA-S-10
BH 800 mmSW 460 mmSH 470 mm
SD 400 mm
Stacking NoUpholstered Yes
Matrix Bistro 2CAS-S-18
BH 820 mmSW 450 mmSH 460 mm
SD 400 mm
Stacking NoUpholstered Yes
Monsanto 4CAS-S-21
BH 820 mmSW 460 mmSH 410 mm
SD 410 mm
Stacking YesUpholstered Yes
MoonATO-S-6
BH 830 mmSW 500 mmSH 480 mm
SD 520 mm
Stacking NoUpholstered Available
MorrisAEC-S-3
BH 780 mmSW 560 mmSH 450 mm
SD 550 mm
Stacking 12Upholstered No
INDOOR side chairsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 1
Page 20 Page 21
MyraMIL-S-23
BH 760 mmSW 500 mmSH 480 mm
SD 570 mm
Stacking NoUpholstered Yes
NassauMIL-S-1
BH 820 mmSW 440 mmSH 480 mm
SD 490 mm
Stacking AvailableUpholstered Available
NetMIL-S-26
BH 780 mmSW 490 mmSH 450 mm
SD 540 mm
Stacking 4Upholstered No
Oakleaf Side ChairACF-S-2
BH 940 mmSW 460 mmSH 470 mm
SD 600 mm
Stacking NoUpholstered Yes
OndaMNA-S-11
BH 870 mmSW 460 mmSH 470 mm
SD 420 mm
Stacking NoUpholstered Yes
OxfordVTI-S-1
BH 860 mmSW 450 mmSH 480 mm
SD 450 mm
Stacking Upholstered No
ParisCIN-S-5
BH 800 mmSW 540 mmSH 490 mm
SD 610 mm
Stacking NoUpholstered Yes
RandersCAS-S-22
BH 760 mmSW 490 mmSH 450 mm
SD 420 mm
Stacking NoUpholstered Yes
RavennaCAS-S-24
BH 770 mmSW 550 mmSH 480 mm
SD 440 mm
Stacking NoUpholstered Yes
RingsteadCAS-S-25
BH 770 mmSW 530 mmSH 460 mm
SD 300 mm
Stacking NoUpholstered Yes
SacrementoCAS-S-26
BH 910 mmSW 540 mmSH 500 mm
SD 400 mm
Stacking NoUpholstered Yes
SarahGAL-S-5
BH 850 mmSW 475 mmSH 480 mm
SD 535 mm
Stacking NoUpholstered Yes
Scorpio Metal SidechairWCT-S-7
BH 865 mmSW 560 mmSH 460 mm
SD 500 mm
Stacking Upholstered No
SD-MartinoVTI-S-3
BH 860 mmSW 450 mmSH 480 mm
SD 450 mm
Stacking Upholstered No
SinatraCAS-S-27
BH 820 mmSW 550 mmSH 450 mm
SD 490 mm
Stacking NoUpholstered Yes
Sirius Metal SidechairWCT-S-9
BH 900 mmSW 450 mmSH 460 mm
SD 540 mm
Stacking Upholstered No
SissiMVA-S-9
BH 820 mmSW 460 mmSH 460 mm
SD 500 mm
Stacking NoUpholstered Yes
Sixty Alu SidechairWCT-S-10
BH 830 mmSW 480 mmSH 460 mm
SD 530 mm
Stacking NoUpholstered No
INDOOR side chairsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 1
Page 22 Page 23
St LouisCAS-S-29
BH 820 mmSW 530 mmSH 450 mm
SD 450 mm
Stacking NoUpholstered Yes
SukiMVA-S-11
BH 840 mmSW 420 mmSH 450 mm
SD 505 mm
Stacking NoUpholstered Yes
SyttenAEC-S-1
BH 830 mmSW 460 mmSH 460 mm
SD 490 mm
Stacking 4Upholstered Available
TimeATO-S-2
BH 820 mmSW 550 mmSH 480 mm
SD 570 mm
Stacking NoUpholstered Yes
ToulonGAL-S-9
BH 840 mmSW 410 mmSH 450 mm
SD 480 mm
Stacking NoUpholstered No
TresAET-S-10
BH 750 mmSW 510 mmSH 460 mm
SD 550 mm
Stacking 4Upholstered Yes
TriesteGAL-S-7
BH 805 mmSW 495 mmSH 445 mm
SD 570 mm
Stacking NoUpholstered No
UniMIL-S-33
BH 800 mmSW 560 mmSH 470 mm
SD 530 mm
Stacking NoUpholstered Available
UniMIL-S-35
BH 800 mmSW 480 mmSH 470 mm
SD 520 mm
Stacking NoUpholstered Available
Urban SidechairWCT-S-13
BH 790 mmSW 460 mmSH 440 mm
SD 525 mm
Stacking NoUpholstered No
Utility 4 SidechairWCT-S-19
BH 920 mmSW 490 mmSH 460 mm
SD 440 mm
Stacking NoUpholstered Yes
Vault Metal SidechairWCT-S-4
BH 900 mmSW 450 mmSH 460 mm
SD 540 mm
Stacking NoUpholstered No
Vincent V.G.BNI-S-3
BH 790 mmSW 560 mmSH 470 mm
SD 410 mm
Stacking NoUpholstered Available
VirginiaAET-S-8
BH 740 mmSW 520 mmSH 450 mm
SD 520 mm
Stacking NoUpholstered Yes
Virginia SidechairWCT-S-6
BH 890 mmSW 445 mmSH 460 mm
SD 525 mm
Stacking Upholstered Yes
WandaMNA-S-13
BH 735 mmSW 490 mmSH 460 mm
SD 410 mm
Stacking NoUpholstered Available
WhiteCAS-S-32
BH 830 mmSW 470 mmSH 460 mm
SD 410 mm
Stacking NoUpholstered Yes
Zara SidechairWCT-S-2
BH 840 mmSW 450 mmSH 480 mm
SD 530 mm
Stacking NoUpholstered Yes
Page 24
INDOOR armchairs
Part A - Section 2
Strike Armchair - See Page 36
London 2 Tube Armchair, High Stool and Side Chair - See Page 33, 45 and 17
INDOOR armchairsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 2
Page 26 Page 27
Albert OneATO-S-14
BH 790 mmSW 540 mmSH 480 mm
SD 550 mm
Stacking NoUpholstered Yes
Albert TreeATO-S-12
BH 700 mmSW 530 mmSH 470 mm
SD 520 mm
Stacking NoUpholstered Yes
AliasCIN-S-15
BH 820 mmSW 540 mmSH 490 mm
SD 610 mm
Stacking NoUpholstered Yes
AliceMNA-S-1
BH 890 mmSW 510 mmSH 475 mm
SD 460 mm
Stacking NoUpholstered No
AllureATO-S-23
BH 800 mmSW 550 mmSH 460 mm
SD 500 mm
Stacking NoUpholstered Yes
AloeATO-S-19
BH 810 mmSW 590 mmSH 480 mm
SD 530 mm
Stacking AvailableUpholstered Yes
Alto ArmchairGDE-S-1
BH 825 mmSW 510 mmSH 500 mm
SD 540 mm
Stacking NoUpholstered Yes
Armchair Cordoba 610TON-S-20
BH 800 mmSW 495 mmSH 460 mm
SD 440 mm
Stacking NoUpholstered Available
Armchair MeranoTON-S-2
BH 780 mmSW 475 mmSH 470 mm
SD 390 mm
Stacking NoUpholstered Available
Armchair OneTON-S-14
BH 790 mmSW 465 mmSH 450 mm
SD 440 mm
Stacking NoUpholstered Available
Armchair SplitTON-S-6
BH 780 mmSW 470 mmSH 480 mm
SD 470 mm
Stacking NoUpholstered Yes
Armchair StockholmTON-S-11
BH 830 mmSW 405 mmSH 470 mm
SD 380 mm
Stacking NoUpholstered Available
Armchair TramTON-S-9
BH 840 mmSW 485 mmSH 460 mm
SD 390 mm
Stacking NoUpholstered Available
AskewBNI-S-16
BH 770 mmSW 530 mmSH 480 mm
SD 440 mm
Stacking NoUpholstered Yes
AthenaMVA-S-1
BH 820 mmSW 585 mmSH 460 mm
SD 570 mm
Stacking NoUpholstered Yes
B-0022FEG-S-1
BH 750 mmSW 660 mmSH 470 mm
SD 505 mm
Stacking NoUpholstered Yes
B-0133FEG-S-3
BH 900 mmSW 580 mmSH 500 mm
SD 560 mm
Stacking NoUpholstered Yes
B-0253FEG-S-4
BH 945 mmSW 590 mmSH 480 mm
SD 585 mm
Stacking NoUpholstered Yes
INDOOR armchairsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 2
Page 28 Page 29
B-0542FEG-S-12
BH 740 mmSW 550 mmSH 490 mm
SD 470 mm
Stacking NoUpholstered Yes
B-0810FEG-S-14
BH 750 mmSW 600 mmSH 480 mm
SD 630 mm
Stacking NoUpholstered Yes
B-0811FEG-S-16
BH 875 mmSW 580 mmSH 480 mm
SD 520 mm
Stacking NoUpholstered Yes
B-0951FEG-S-19
BH 965 mmSW 560 mmSH 480 mm
SD 545 mm
Stacking NoUpholstered Yes
B-10FEG-S-21
BH 885 mmSW 530 mmSH 460 mm
SD 615 mm
Stacking NoUpholstered Available
B-1102FEG-S-23
BH 870 mmSW 570 mmSH 490 mm
SD 530 mm
Stacking NoUpholstered Yes
B-1107FEG-S-26
BH 830 mmSW 560 mmSH 480 mm
SD 510 mm
Stacking NoUpholstered Yes
B-1110FEG-S-28
BH 750 mmSW 550 mmSH 490 mm
SD 460 mm
Stacking NoUpholstered Available
B-1209FEG-S-30
BH 835 mmSW 555 mmSH 500 mm
SD 530 mm
Stacking NoUpholstered Yes
B-1222FEG-S-34
BH 885 mmSW 555 mmSH 480 mm
SD 580 mm
Stacking NoUpholstered Yes
B-1404FEG-S-38
BH 830 mmSW 555 mmSH 490 mm
SD 580 mm
Stacking NoUpholstered Available
B-1406FEG-S-40
BH 870 mmSW 540 mmSH 490 mm
SD 480 mm
Stacking NoUpholstered Available
B-1523FEG-S-45
BH 710 mmSW 570 mmSH 470 mm
SD 560 mm
Stacking NoUpholstered Yes
B-16FEG-S-46
BH 880 mmSW 550 mmSH 490 mm
SD 620 mm
Stacking NoUpholstered Available
B-165FEG-S-49
BH 770 mmSW 550 mmSH 460 mm
SD 490 mm
Stacking NoUpholstered Available
B-18FEG-S-52
BH 880 mmSW 560 mmSH 490 mm
SD 610 mm
Stacking NoUpholstered Available
B-372FEG-S-59
BH 970 mmSW 560 mmSH 460 mm
SD 510 mm
Stacking NoUpholstered No
B-811FEG-S-67
BH 805 mmSW 510 mmSH 460 mm
SD 540 mm
Stacking NoUpholstered No
INDOOR armchairsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 2
Page 30 Page 31
B-9FEG-S-73
BH 835 mmSW 600 mmSH 460 mm
SD 600 mm
Stacking NoUpholstered Available
B-9FEG-S-74
BH 835 mmSW 600 mmSH 460 mm
SD 600 mm
Stacking NoUpholstered Yes
B-9FEG-S-75
BH 800 mmSW 600 mmSH 480 mm
SD 600 mm
Stacking NoUpholstered Yes
B-9416FEG-S-80
BH 950 mmSW 570 mmSH 500 mm
SD 635 mm
Stacking NoUpholstered Yes
B-9437FEG-S-82
BH 770 mmSW 595 mmSH 490 mm
SD 595 mm
Stacking NoUpholstered Yes
B-9702FEG-S-84
BH 810 mmSW 630 mmSH 490 mm
SD 560 mm
Stacking NoUpholstered Yes
B-9744FEG-S-86
BH 820 mmSW 690 mmSH 490 mm
SD 590 mm
Stacking NoUpholstered Yes
B-9866FEG-S-88
BH 970 mmSW 575 mmSH 480 mm
SD 550 mm
Stacking NoUpholstered Yes
B-9907FEG-S-90
BH 860 mmSW 530 mmSH 460 mm
SD 520 mm
Stacking NoUpholstered Available
Blue EyesATO-S-10
BH 770 mmSW 540 mmSH 490 mm
SD 560 mm
Stacking NoUpholstered Yes
ColtCIN-S-7
BH 900 mmSW 620 mmSH 480 mm
SD 590 mm
Stacking NoUpholstered Yes
CroissantBNI-S-10
BH 760 mmSW 490 mmSH 480 mm
SD 420 mm
Stacking NoUpholstered Yes
Doha 2CAS-S-8
BH 870 mmSW 630 mmSH 490 mm
SD 440 mm
Stacking NoUpholstered Yes
DollBNI-S-7
BH 770 mmSW 500 mmSH 480 mm
SD 430 mm
Stacking YesUpholstered Available
DulwichGAL-S-1
BH 825 mmSW 560 mmSH 440 mm
SD 600 mm
Stacking NoUpholstered Yes
FlintCAS-S-10
BH 820 mmSW 610 mmSH 490 mm
SD 450 mm
Stacking NoUpholstered Yes
FlintMIL-S-8
BH 740 mmSW 550 mmSH 480 mm
SD 500 mm
Stacking NoUpholstered Available
Forli ArmchairGDE-S-4
BH 775 mmSW 635 mmSH 475 mm
SD 535 mm
Stacking NoUpholstered Yes
INDOOR armchairsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 2
Page 32 Page 33
GlowMVA-S-5
BH 830 mmSW 650 mmSH 475 mm
SD 600 mm
Stacking NoUpholstered Yes
GulaCAS-S-12
BH 840 mmSW 530 mmSH 450 mm
SD 460 mm
Stacking NoUpholstered Yes
HarrowGAL-S-11
BH 820 mmSW 540 mmSH 440 mm
SD 520 mm
Stacking NoUpholstered Available
HippyBNI-S-13
BH 770 mmSW 580 mmSH 490 mm
SD 400 mm
Stacking NoUpholstered Yes
IbisMIL-S-13
BH 780 mmSW 550 mmSH 460 mm
SD 550 mm
Stacking NoUpholstered No
KiccaMIL-S-15
BH 760 mmSW 620 mmSH 460 mm
SD 570 mm
Stacking NoUpholstered Yes
KonteaMIL-S-17
BH 850 mmSW 580 mmSH 460 mm
SD 580 mm
Stacking NoUpholstered Yes
KykMIL-S-19
BH 730 mmSW 670 mmSH 445 mm
SD 640 mm
Stacking NoUpholstered Yes
Line PTAIA-S-2
BH 800 mmSW 500 mmSH 460 mm
SD 500 mm
Stacking NoUpholstered Yes
London 2 TubeCIN-S-12
BH 820 mmSW 540 mmSH 490 mm
SD 610 mm
Stacking NoUpholstered Yes
LordCIN-S-10
BH 820 mmSW 560 mmSH 490 mm
SD 610 mm
Stacking NoUpholstered Yes
LouvreCIN-S-1
BH 840 mmSW 540 mmSH 490 mm
SD 610 mm
Stacking NoUpholstered Yes
M3002MXI-S-20
BH 820 mmSW 620 mmSH 450 mm
SD 510 mm
Stacking NoUpholstered Yes
M3012MXI-S-19
BH 740 mmSW 560 mmSH 450 mm
SD 530 mm
Stacking NoUpholstered Yes
M3065PMXI-S-28
BH 820 mmSW 570 mmSH 430 mm
SD 500 mm
Stacking NoUpholstered Yes
M3085MXI-S-5
BH 800 mmSW 500 mmSH mm
SD 500 mm
Stacking NoUpholstered Yes
M3090PMXI-S-23
BH 790 mmSW 510 mmSH 450 mm
SD 470 mm
Stacking NoUpholstered Yes
M3144MXI-S-16
BH 860 mmSW 580 mmSH 450 mm
SD 520 mm
Stacking NoUpholstered Yes
INDOOR armchairsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 2
Page 34 Page 35
M3216MXI-S-6
BH 830 mmSW 710 mmSH mm
SD 600 mm
Stacking NoUpholstered Yes
M3247MXI-S-31
BH 820 mmSW 540 mmSH 450 mm
SD 500 mm
Stacking NoUpholstered Yes
M3278PMXI-S-11
BH 920 mmSW 600 mmSH 450 mm
SD 600 mm
Stacking NoUpholstered Yes
M3286MXI-S-9
BH 780 mmSW 450 mmSH 450 mm
SD 440 mm
Stacking NoUpholstered Yes
M3298MXI-S-25
BH 900 mmSW 600 mmSH 450 mm
SD 600 mm
Stacking NoUpholstered Yes
M3318MXI-S-2
BH 820 mmSW 610 mmSH mm
SD 520 mm
Stacking NoUpholstered Yes
M3375MXI-S-8
BH 830 mmSW 510 mmSH 450 mm
SD 500 mm
Stacking NoUpholstered Yes
M3426MXI-S-3
BH 770 mmSW 650 mmSH mm
SD 680 mm
Stacking NoUpholstered Yes
M3430MXI-S-27
BH 810 mmSW 610 mmSH 450 mm
SD 610 mm
Stacking NoUpholstered Yes
M4081MXI-S-1
BH 800 mmSW 580 mmSH mm
SD 550 mm
Stacking NoUpholstered Yes
M5000PMXI-S-22
BH 800 mmSW 570 mmSH 450 mm
SD 570 mm
Stacking NoUpholstered Yes
M5030PMXI-S-14
BH 850 mmSW 600 mmSH 450 mm
SD 550 mm
Stacking NoUpholstered Yes
M5098PMXI-S-13
BH 900 mmSW 600 mmSH 450 mm
SD 560 mm
Stacking NoUpholstered Yes
M5290MXI-S-15
BH 800 mmSW 550 mmSH 450 mm
SD 550 mm
Stacking NoUpholstered Yes
MackaAET-S-13
BH 800 mmSW 610 mmSH 460 mm
SD 560 mm
Stacking NoUpholstered Yes
MariaCAS-S-17
BH 810 mmSW 540 mmSH 490 mm
SD 430 mm
Stacking NoUpholstered Yes
MarkaMIL-S-21
BH 850 mmSW 620 mmSH 460 mm
SD 580 mm
Stacking NoUpholstered Yes
Morelia 3CAS-S-19
BH 890 mmSW 590 mmSH 490 mm
SD 460 mm
Stacking NoUpholstered Yes
INDOOR armchairsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 2
Page 36 Page 37
MyraMIL-S-22
BH 760 mmSW 610 mmSH 480 mm
SD 560 mm
Stacking NoUpholstered Yes
NetMIL-S-25
BH 780 mmSW 560 mmSH 450 mm
SD 540 mm
Stacking 4Upholstered No
Oakleaf ArmchairACF-S-1
BH 940 mmSW 605 mmSH 470 mm
SD 600 mm
Stacking NoUpholstered Yes
ParisCIN-S-4
BH 800 mmSW 540 mmSH 490 mm
SD 610 mm
Stacking NoUpholstered Yes
SissiMVA-S-8
BH 820 mmSW 540 mmSH 460 mm
SD 520 mm
Stacking NoUpholstered Yes
SpyBNI-S-1
BH 750 mmSW 500 mmSH 460 mm
SD 440 mm
Stacking NoUpholstered Yes
StrikeAET-S-1
BH 780 mmSW 550 mmSH 470 mm
SD 530 mm
Stacking NoUpholstered Yes
Suri IIMVA-S-13
BH 825 mmSW 620 mmSH 460 mm
SD 480 mm
Stacking NoUpholstered Available
SusanMNA-S-12
BH 770 mmSW 630 mmSH 470 mm
SD 490 mm
Stacking NoUpholstered Yes
TimeATO-S-1
BH 820 mmSW 550 mmSH 480 mm
SD 570 mm
Stacking NoUpholstered Yes
TresAET-S-11
BH 750 mmSW 570 mmSH 460 mm
SD 550 mm
Stacking 4Upholstered Yes
TundraAET-S-4
BH 800 mmSW 610 mmSH 450 mm
SD 480 mm
Stacking NoUpholstered Yes
UniMIL-S-31
BH 800 mmSW 560 mmSH 470 mm
SD 530 mm
Stacking NoUpholstered Available
Uni-KaMIL-S-39
BH 810 mmSW 590 mmSH 470 mm
SD 560 mm
Stacking NoUpholstered Available
Uni-KaMIL-S-40
BH 810 mmSW 590 mmSH 470 mm
SD 540 mm
Stacking NoUpholstered Available
Uni-KaMIL-S-41
BH 810 mmSW 590 mmSH 470 mm
SD 540 mm
Stacking NoUpholstered Available
Uni-KaMIL-S-42
BH 810 mmSW 590 mmSH 480 mm
SD 540 mm
Stacking NoUpholstered Available
Vincent V.G.BNI-S-2
BH 790 mmSW 480 mmSH 470 mm
SD 410 mm
Stacking NoUpholstered Available
INDOOR armchairsAtlas Contract Furniture - Loose Furniture Catalogue
Page 38
W.BNI-S-5
BH 720 mmSW 595 mmSH 475 mm
SD 400 mm
Stacking NoUpholstered No
WinMNA-S-15
BH 800 mmSW 420 mmSH 470 mm
SD 410 mm
Stacking NoUpholstered No
ZA1052MXI-S-4
BH 840 mmSW 720 mmSH mm
SD 600 mm
Stacking NoUpholstered Yes
Zara ArmchairWCT-S-1
BH 840 mmSW 550 mmSH 480 mm
SD 670 mm
Stacking NoUpholstered Yes
INDOOR high stoolsPart A - Section 3
INDOOR high stoolsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 3
Page 40 Page 41
Ako IIMVA-S-3
BH 995 mmSW 460 mmSH 760 mm
SD 460 mm
Stacking NoUpholstered Yes
Albert OneATO-S-16
BH 1130 mmSW 540 mmSH 800 mm
SD 540 mm
Stacking NoUpholstered Yes
Albert TreeATO-S-13
BH 1040 mmSW 530 mmSH 810 mm
SD 480 mm
Stacking NoUpholstered Yes
AliasCIN-S-17
BH 1020 mmSW 540 mmSH 800 mm
SD 520 mm
Stacking NoUpholstered Yes
AliceGAL-S-4
BH 1060 mmSW 460 mmSH 750 mm
SD 525 mm
Stacking NoUpholstered No
Alto HighchairGDE-S-3
BH 1065 mmSW 430 mmSH mm
SD 540 mm
Stacking NoUpholstered Yes
ArtùATO-S-9
BH 1180 mmSW 510 mmSH 820 mm
SD 530 mm
Stacking NoUpholstered Yes
Asuncion Beta 2CAS-S-2
BH 1080 mmSW 530 mmSH 800 mm
SD 400 mm
Stacking NoUpholstered Yes
Barstool 73TON-S-25
BH 780 mmSW 370 mmSH 780 mm
SD 370 mm
Stacking NoUpholstered Available
Barstool Cordoba 613TON-S-22
BH 1040 mmSW 430 mmSH 760 mm
SD 385 mm
Stacking NoUpholstered Available
Barstool MeranoTON-S-4
BH 994 mmSW 440 mmSH 800 mm
SD 360 mm
Stacking NoUpholstered Available
Barstool PuntonTON-S-27
BH 820 mmSW 400 mmSH 820 mm
SD 400 mm
Stacking NoUpholstered Available
Barstool SplitTON-S-8
BH 1000 mmSW 421 mmSH 800 mm
SD 392 mm
Stacking NoUpholstered Available
Barstool StockholmTON-S-13
BH 790 mmSW 400 mmSH 790 mm
SD 400 mm
Stacking NoUpholstered Available
Blue EyesATO-S-11
BH 1120 mmSW 540 mmSH 830 mm
SD 560 mm
Stacking NoUpholstered Yes
BSDT-1260FEG-S-36
BH 1060 mmSW 465 mmSH 750 mm
SD 500 mm
Stacking NoUpholstered Available
BST-0253FEG-S-6
BH 1215 mmSW 420 mmSH 780 mm
SD 530 mm
Stacking NoUpholstered Yes
BST-0461FEG-S-7
BH 780 mmSW 380 mmSH 780 mm
SD 380 mm
Stacking NoUpholstered Yes
INDOOR high stoolsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 3
Page 42 Page 43
BST-0461FEG-S-8
BH 780 mmSW 995 mmSH 780 mm
SD 380 mm
Stacking NoUpholstered Yes
BST-0811FEG-S-17
BH 1190 mmSW 470 mmSH 800 mm
SD 545 mm
Stacking NoUpholstered Yes
BST-1102FEG-S-24
BH 1075 mmSW 480 mmSH 750 mm
SD 460 mm
Stacking NoUpholstered No
BST-1107FEG-S-27
BH 1145 mmSW 470 mmSH 800 mm
SD 530 mm
Stacking NoUpholstered Yes
BST-1209FEG-S-31
BH 770 mmSW 450 mmSH 770 mm
SD 380 mm
Stacking NoUpholstered Yes
BST-1209FEG-S-32
BH 900 mmSW 390 mmSH 770 mm
SD 460 mm
Stacking NoUpholstered Yes
BST-1412FEG-S-43
BH 1065 mmSW 450 mmSH 780 mm
SD 490 mm
Stacking NoUpholstered Yes
BST-165FEG-S-50
BH 1060 mmSW 550 mmSH 750 mm
SD 510 mm
Stacking NoUpholstered Available
BST-18FEG-S-53
BH 1090 mmSW 430 mmSH 750 mm
SD 535 mm
Stacking NoUpholstered Available
BST-225FEG-S-55
BH 1070 mmSW 430 mmSH 750 mm
SD 490 mm
Stacking NoUpholstered Available
BST-302FEG-S-56
BH 750 mmSW 450 mmSH 750 mm
SD 450 mm
Stacking NoUpholstered Available
BST-5910FEG-S-62
BH 1040 mmSW 410 mmSH 750 mm
SD 430 mm
Stacking NoUpholstered No
BST-788 FANFEG-S-66
BH 1060 mmSW 460 mmSH 780 mm
SD 495 mm
Stacking NoUpholstered Available
BST-8810FEG-S-70
BH 1040 mmSW 460 mmSH 750 mm
SD 530 mm
Stacking NoUpholstered Available
BST-8810FEG-S-72
BH 1060 mmSW 460 mmSH 780 mm
SD 515 mm
Stacking NoUpholstered Available
BST-9416FEG-S-81
BH 1260 mmSW 480 mmSH 790 mm
SD 560 mm
Stacking NoUpholstered Yes
BST-9702FEG-S-83
BH 1260 mmSW 480 mmSH 790 mm
SD 530 mm
Stacking NoUpholstered Yes
BST-9907FEG-S-91
BH 1100 mmSW 460 mmSH 760 mm
SD 540 mm
Stacking NoUpholstered Available
INDOOR high stoolsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 3
Page 44 Page 45
ClaraATO-S-22
BH 1270 mmSW 470 mmSH 850 mm
SD 520 mm
Stacking NoUpholstered Yes
ColtCIN-S-9
BH 1130 mmSW 520 mmSH 800 mm
SD 540 mm
Stacking NoUpholstered Yes
CoqueMNA-S-7
BH 820 mmSW 320 mmSH 760 mm
SD 350 mm
Stacking NoUpholstered No
CroissantBNI-S-12
BH 990 mmSW 470 mmSH 820 mm
SD 350 mm
Stacking NoUpholstered Yes
DollBNI-S-9
BH 1075 mmSW 460 mmSH 800 mm
SD 380 mm
Stacking NoUpholstered No
ElisaATO-S-18
BH 1030 mmSW 490 mmSH 770 mm
SD 480 mm
Stacking NoUpholstered Available
FlintMIL-S-12
BH 770 mmSW 570 mmSH 770 mm
SD 560 mm
Stacking 4Upholstered Available
Flint 2CAS-S-11
BH 1140 mmSW 600 mmSH 810 mm
SD 450 mm
Stacking NoUpholstered Yes
FridaATO-S-5
BH 1040 mmSW 510 mmSH 780 mm
SD 530 mm
Stacking NoUpholstered Available
GlowMVA-S-6
BH 1030 mmSW 520 mmSH 760 mm
SD 490 mm
Stacking NoUpholstered Yes
HarrowGAL-S-13
BH 1100 mmSW 470 mmSH 770 mm
SD 510 mm
Stacking NoUpholstered Available
HippyBNI-S-15
BH 970 mmSW 500 mmSH 800 mm
SD 355 mm
Stacking NoUpholstered Yes
KiccaMIL-S-16
BH 1100 mmSW 620 mmSH 800 mm
SD 570 mm
Stacking NoUpholstered Yes
KonteaMIL-S-18
BH 1200 mmSW 580 mmSH 810 mm
SD 600 mm
Stacking NoUpholstered Yes
London 2 TubeCIN-S-14
BH 1020 mmSW 540 mmSH 800 mm
SD 520 mm
Stacking NoUpholstered Yes
LordCIN-S-11
BH 1060 mmSW 520 mmSH 800 mm
SD 520 mm
Stacking NoUpholstered Yes
LouvreCIN-S-3
BH 1060 mmSW 540 mmSH 800 mm
SD 520 mm
Stacking NoUpholstered Yes
MackaAET-S-14
BH 1070 mmSW 610 mmSH 750 mm
SD 560 mm
Stacking NoUpholstered Yes
INDOOR high stoolsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 3
Page 46 Page 47
Manaus Beta 2CAS-S-16
BH 1060 mmSW 470 mmSH 830 mm
SD 340 mm
Stacking NoUpholstered Yes
MargotAEC-S-6
BH 790 mmSW 340 mmSH 790 mm
SD 340 mm
Stacking NoUpholstered Available
MoonATO-S-7
BH 1090 mmSW 500 mmSH 770 mm
SD 520 mm
Stacking NoUpholstered Available
MorrisAEC-S-4
BH 1020 mmSW 440 mmSH 770 mm
SD 510 mm
Stacking NoUpholstered No
MyraMIL-S-24
BH 990 mmSW 480 mmSH 770 mm
SD 510 mm
Stacking NoUpholstered Yes
NetMIL-S-27
BH 970 mmSW 480 mmSH 750 mm
SD 490 mm
Stacking NoUpholstered No
Oakleaf High StoolACF-S-3
BH 690 mmSW 370 mmSH 690 mm
SD 370 mm
Stacking NoUpholstered Yes
ParisCIN-S-6
BH 1040 mmSW 540 mmSH 800 mm
SD 520 mm
Stacking NoUpholstered Yes
Randers BetaCAS-S-23
BH 1110 mmSW 500 mmSH 790 mm
SD 410 mm
Stacking NoUpholstered Yes
S3200MXI-S-39
BH 1100 mmSW 420 mmSH 750 mm
SD 550 mm
Stacking NoUpholstered Yes
S3269MXI-S-40
BH 1050 mmSW 400 mmSH 750 mm
SD 400 mm
Stacking NoUpholstered Yes
S3291MXI-S-38
BH 1070 mmSW 590 mmSH 720 mm
SD 600 mm
Stacking NoUpholstered Yes
S3378MXI-S-41
BH 1040 mmSW 400 mmSH 650 mm
SD 500 mm
Stacking NoUpholstered Yes
S3386MXI-S-37
BH 750 mmSW 530 mmSH 750 mm
SD 490 mm
Stacking NoUpholstered Yes
S3416MXI-S-35
BH 1050 mmSW 550 mmSH 750 mm
SD 550 mm
Stacking NoUpholstered Yes
S3424MXI-S-36
BH 970 mmSW 450 mmSH 650 mm
SD 550 mm
Stacking NoUpholstered Yes
S5152MXI-S-34
BH 1020 mmSW 450 mmSH 720 mm
SD 500 mm
Stacking NoUpholstered Yes
Scorpio Metal HighstoolWCT-S-8
BH 700 mmSW 700 mmSH 400 mm
SD 400 mm
Stacking Upholstered Available
INDOOR high stoolsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 3
Page 48 Page 49
SG-CubaVTI-S-2
BH 770 mmSW 310 mmSH 770 mm
SD 310 mm
Stacking YesUpholstered No
SG-Martino-4-SSVTI-S-4
BH 800 mmSW 450 mmSH 800 mm
SD 450 mm
Stacking Upholstered No
Sinatra BetaCAS-S-28
BH 1100 mmSW 550 mmSH 810 mm
SD 480 mm
Stacking NoUpholstered Yes
SissiMVA-S-10
BH 1030 mmSW 480 mmSH 760 mm
SD 500 mm
Stacking NoUpholstered Yes
Sixty Alu HighstoolWCT-S-11
BH 1050 mmSW 765 mmSH 470 mm
SD 560 mm
Stacking NoUpholstered No
St Louis BetaCAS-S-30
BH 1090 mmSW 510 mmSH 760 mm
SD 450 mm
Stacking NoUpholstered Yes
StrikeAET-S-2
BH 1030 mmSW 540 mmSH 750 mm
SD 510 mm
Stacking NoUpholstered Yes
SukiMVA-S-12
BH 975 mmSW 420 mmSH 760 mm
SD 460 mm
Stacking NoUpholstered Yes
SyttenAEC-S-2
BH 1020 mmSW 490 mmSH 760 mm
SD 570 mm
Stacking NoUpholstered Available
TimeATO-S-3
BH 1070 mmSW 550 mmSH 770 mm
SD 570 mm
Stacking NoUpholstered Yes
ToulonGAL-S-10
BH 1070 mmSW 410 mmSH 760 mm
SD 490 mm
Stacking NoUpholstered No
TresAET-S-12
BH 870 mmSW 530 mmSH 780 mm
SD 475 mm
Stacking 4Upholstered Yes
TriesteGAL-S-8
BH 745 mmSW 420 mmSH 745 mm
SD 420 mm
Stacking NoUpholstered Available
UniMIL-S-36
BH 1120 mmSW 480 mmSH 770 mm
SD 500 mm
Stacking NoUpholstered Available
Urban HighstoolWCT-S-14
BH 750 mmSW 430 mmSH 750 mm
SD 430 mm
Stacking NoUpholstered No
Vincent V.G.BNI-S-4
BH 1110 mmSW 500 mmSH 800 mm
SD 420 mm
Stacking NoUpholstered Available
VirginiaAET-S-9
BH 970 mmSW 440 mmSH 740 mm
SD 510 mm
Stacking NoUpholstered Yes
W.BNI-S-6
BH 950 mmSW 580 mmSH 780 mm
SD 395 mm
Stacking NoUpholstered No
INDOOR high stoolsAtlas Contract Furniture - Loose Furniture Catalogue
Page 50
WandaMNA-S-14
BH 900 mmSW 440 mmSH 680 mm
SD 360 mm
Stacking NoUpholstered Yes
Bespoke Banquette Seating and Assorted Loose Furniture - The Orchid Hotel, Bournemouth
INDOOR miscellaneous
Part A - Section 4
INDOOR miscellaneousAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 4
Page 52 Page 53
B-1430FEG-S-44
BH 810 mmSW 680 mmSH 410 mm
SD 800 mmAH 590 mm
Stacking NoUpholstered Yes
BambinoGAL-S-6
BH 760 mmSW 520 mmSH 500 mm
SD 500 mm
Stacking 4Upholstered No
BeverlyCAS-S-5
BH 1030 mmSW 860 mmSH 470 mm
SD 530 mmAH 670 mm
Stacking NoUpholstered Yes
CaenCAS-S-6
BH 830 mmSW 830 mmSH 460 mm
SD 520 mmAH mm
Stacking NoUpholstered Yes
CambridgeCAS-S-7
BH 1010 mmSW 790 mmSH 430 mm
SD 540 mmAH 580 mm
Stacking NoUpholstered Yes
Duke 2CIN-S-18
BH 1120 mmSW 730 mmSH 460 mm
SD 780 mmAH 700 mm
Stacking NoUpholstered Yes
Lounge Armchair CordobaTON-S-19
BH 770 mmSW 600 mmSH 430 mm
SD 570 mmAH 675 mm
Stacking NoUpholstered Yes
Lounge Armchair SplitTON-S-5
BH 725 mmSW 470 mmSH 420 mm
SD 490 mmAH 610 mm
Stacking NoUpholstered Yes
Merano Lounge ArmchairTON-S-1
BH 700 mmSW 490 mmSH 410 mm
SD 500 mmAH 550 mm
Stacking NoUpholstered Yes
MoreliaCAS-S-20
BH 720 mmSW 710 mmSH 440 mm
SD 420 mmAH 560 mm
Stacking NoUpholstered Yes
Oakleaf Low StoolACF-S-4
BH 600 mmSW 370 mmSH 600 mm
SD 370 mm
Stacking NoUpholstered Yes
StrikeAET-S-3
BH 700 mmSW 680 mmSH 390 mm
SD 690 mmAH 540 mm
Stacking NoUpholstered Yes
T-9739FEG-S-85
BH 460 mmSW 370 mmSH 460 mm
SD 370 mm
Stacking NoUpholstered Available
TalosCAS-S-31
BH 1170 mmSW 730 mmSH 470 mm
SD 500 mmAH 600 mm
Stacking NoUpholstered Yes
Urban LowstoolWCT-S-15
BH 440 mmSW 400 mmSH 440 mm
SD 400 mm
Stacking NoUpholstered No
ZA1084MXI-S-33
BH 800 mmSW 680 mmSH 400 mm
SD 700 mm
Stacking NoUpholstered Yes
Zara Lounge ArmchairWCT-S-3
BH 800 mmSW 550 mmSH 420 mm
SD 670 mm
Stacking NoUpholstered Yes
Page 54
Deep Square Pleated Banquette Seating and Assorted Loose Furniture - Twickenham Rugby Club, VIP Lounge, Hampton
Plain & Roll Banquette Seating with Side Chairs - Zesty, Kristainstad, Sweden
INDOOR coffee heightPart A - Section 5 - Tables and Bases
INDOOR coffee height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 5
Page 56 Page 57
Danilo Round LargeTLO-T-73
BH 480 mmBW 600 mm
Base Type Round
BD 600 mm
Max. S 1100 mmMax. D 1200 mm
Finishes Available No
Flip Top No
Danilo Round MediumTLO-T-67
BH 480 mmBW 450 mm
Base Type Round
BD 450 mm
Max. S 700 mmMax. D 900 mm
Finishes Available No
Flip Top No
Danilo Square LargeTLO-T-76
BH 480 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 1000 mmMax. D 1200 mm
Finishes Available No
Flip Top No
Danilo Square MediumTLO-T-70
BH 480 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 800 mmMax. D 1000 mm
Finishes Available No
Flip Top No
Danilo Square Single PedestalTLO-T-64
BH 480 mmBW 400 mm
Base Type Rectangular
BD 600 mm
Max. S 800 x 1200 mmMax. D N/A mm
Finishes Available No
Flip Top No
Danilo Square TwinTLO-T-79
BH 480 mmBW 400 mm
Base Type Twin Pedestal
BD 750 mm
Max. S 900 x 1500 mmMax. D N/A mm
Finishes Available No
Flip Top No
Floorfix (Stainless Steel)GAL-T-5
BH 430 mmBW 210 mm
Base Type Round
BD 210 mm
Max. S 700 mmMax. D 800 mm
Finishes Available No
Flip Top No
Forza Round LargeTLO-T-46
BH 480 mmBW 600 mm
Base Type Round
BD 600 mm
Max. S 1000 mmMax. D 1300 mm
Finishes Available No
Flip Top No
Forza Round MediumTLO-T-37
BH 480 mmBW 450 mm
Base Type Round
BD 450 mm
Max. S 700 mmMax. D 900 mm
Finishes Available No
Flip Top No
Forza Round Medium LargeTLO-T-43
BH 480 mmBW 500 mm
Base Type Round
BD 500 mm
Max. S 800 mmMax. D 1000 mm
Finishes Available No
Flip Top No
Forza Round SmallTLO-T-31
BH 480 mmBW 400 mm
Base Type Round
BD 400 mm
Max. S 600 mmMax. D 700 mm
Finishes Available No
Flip Top No
Forza Square Extra LargeTLO-T-49
BH 480 mmBW 600 mm
Base Type Square
BD 600 mm
Max. S 1200 mmMax. D 1500 mm
Finishes Available No
Flip Top No
Forza Square MediumTLO-T-40
BH 480 mmBW 450 mm
Base Type Square
BD 450 mm
Max. S 900 mmMax. D 1200 mm
Finishes Available No
Flip Top No
Forza Square SmallTLO-T-34
BH 480 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 700 mmMax. D 1000 mm
Finishes Available No
Flip Top No
Forza Square Twin PedestalTLO-T-52
BH 480 mmBW 750 mm
Base Type Twin Pedestal
BD 400 mm
Max. S 900 x 1500 mmMax. D N/A mm
Finishes Available No
Flip Top No
LincolnGAL-T-99
BH 430 mmBW 810 mm
Base Type 5 Leg
BD 810 mm
Max. S 800 mmMax. D 1200 mm
Finishes Available No
Flip Top No
Lincoln LargeGAL-T-96
BH 430 mmBW 810 mm
Base Type 4 Leg
BD 810 mm
Max. S 800 mmMax. D 900 mm
Finishes Available No
Flip Top No
Lincoln SmallGAL-T-93
BH 430 mmBW 580 mm
Base Type 4 Leg
BD 580 mm
Max. S 700 mmMax. D 750 mm
Finishes Available No
Flip Top No
INDOOR coffee height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 5
Page 58 Page 59
Orlando Chrome LargeTLO-T-22
BH 480 mmBW 840 mm
Base Type 4 Leg
BD 840 mm
Max. S 1200 mmMax. D 1300 mm
Finishes Available Yes
Flip Top No
Orlando Chrome MediumTLO-T-16
BH 480 mmBW 760 mm
Base Type 4 Leg
BD 760 mm
Max. S 1000 mmMax. D 1200 mm
Finishes Available Yes
Flip Top No
Orlando Chrome SmallTLO-T-10
BH 480 mmBW 560 mm
Base Type 4 Leg
BD 560 mm
Max. S 700 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Orlando Chrome TwinTLO-T-28
BH 480 mmBW 550 mm
Base Type Twin Pedestal
BD N/A mm
Max. S 1000 x 1800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Orlando LargeTLO-T-19
BH 480 mmBW 840 mm
Base Type 4 Leg
BD 840 mm
Max. S 1200 mmMax. D 1300 mm
Finishes Available Yes
Flip Top No
Orlando MediumTLO-T-13
BH 480 mmBW 760 mm
Base Type 4 Leg
BD 760 mm
Max. S 1000 mmMax. D 1200 mm
Finishes Available Yes
Flip Top No
Orlando SmallTLO-T-7
BH 480 mmBW 560 mm
Base Type 4 Leg
BD 560 mm
Max. S 700 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Orlando TwinTLO-T-25
BH 480 mmBW 550 mm
Base Type Twin Pedestal
BD N/A mm
Max. S 1000 x 1800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle (Round Column)GAL-T-65
BH 430 mmBW 400 mm
Base Type Rectangular
BD 600 mm
Max. S 1100 x 700 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle (Square Column)GAL-T-61
BH 430 mmBW 400 mm
Base Type Rectangular
BD 600 mm
Max. S 1100 x 700 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle SS (Round Column)GAL-T-67
BH 430 mmBW 400 mm
Base Type Rectangular
BD 600 mm
Max. S 1100 x 700 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle SS (Square Column)GAL-T-63
BH 430 mmBW 400 mm
Base Type Rectangular
BD 600 mm
Max. S 1100 x 700 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle Twin PedestalGAL-T-69
BH 430 mmBW 400 mm
Base Type Twin Pedestal
BD 700 mm
Max. S 1400 x 800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle Twin PedestalGAL-T-75
BH 430 mmBW 400 mm
Base Type Twin Pedestal
BD 700 mm
Max. S 1400 x 800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle Twin Pedestal SSGAL-T-72
BH 430 mmBW 400 mm
Base Type Twin Pedestal
BD 700 mm
Max. S 1400 x 800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle Twin Pedestal SSGAL-T-78
BH 430 mmBW 400 mm
Base Type Twin Pedestal
BD 700 mm
Max. S 1400 x 800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Round Large (Round Column)GAL-T-87
BH 430 mmBW 600 mm
Base Type Round
BD 600 mm
Max. S 1150 mmMax. D 1200 mm
Finishes Available Yes
Flip Top No
Profile Round Large SS (Round Column)GAL-T-90
BH 430 mmBW 600 mm
Base Type Round
BD 600 mm
Max. S 1150 mmMax. D 1200 mm
Finishes Available Yes
Flip Top No
INDOOR coffee height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 5
Page 60 Page 61
Profile Round Small (Round Column)GAL-T-81
BH 430 mmBW 430 mm
Base Type Round
BD 430 mm
Max. S 750 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Profile Round Small SS (Round Column)GAL-T-84
BH 430 mmBW 430 mm
Base Type Round
BD 430 mm
Max. S 750 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Profile Square Large (Round Column)GAL-T-55
BH 430 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 1000 mmMax. D 1100 mm
Finishes Available Yes
Flip Top No
Profile Square Large (Square Column)GAL-T-43
BH 430 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 1000 mmMax. D 1100 mm
Finishes Available Yes
Flip Top No
Profile Square Large SS (Round Column)GAL-T-58
BH 430 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 1000 mmMax. D 1100 mm
Finishes Available Yes
Flip Top No
Profile Square Large SS (Square Column)GAL-T-46
BH 430 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 1000 mmMax. D 1100 mm
Finishes Available Yes
Flip Top No
Profile Square Small (Round Column)GAL-T-49
BH 430 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 800 mmMax. D 850 mm
Finishes Available Yes
Flip Top No
Profile Square Small (Square Column)GAL-T-37
BH 430 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 800 mmMax. D 850 mm
Finishes Available Yes
Flip Top No
Profile Square Small SS (Round Column)GAL-T-52
BH 430 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 800 mmMax. D 850 mm
Finishes Available Yes
Flip Top No
Profile Square Small SS (Square Column)GAL-T-40
BH 430 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 800 mmMax. D 850 mm
Finishes Available Yes
Flip Top No
Quattro MediumTLO-T-58
BH 480 mmBW 430 mm
Base Type Square
BD 430 mm
Max. S 800 mmMax. D 1000 mm
Finishes Available No
Flip Top No
Quattro Single PedestalTLO-T-55
BH 480 mmBW 400 mm
Base Type Rectangular
BD 550 mm
Max. S 800 x 1200 mmMax. D N/A mm
Finishes Available No
Flip Top No
Quattro TwinTLO-T-61
BH 480 mmBW 800 mm
Base Type Twin Pedestal
BD 400 mm
Max. S 900 x 1600 mmMax. D N/A mm
Finishes Available No
Flip Top No
ToolAET-T-1
BH 450 mmBW N/A mm
Base Type 3 Leg
BD N/A mm
Max. S N/A mmMax. D 500 mm
Finishes Available Yes
Flip Top No
Trumpet LargeGAL-T-22
BH 430 mmBW 600 mm
Base Type Round
BD 600 mm
Max. S 1000 mmMax. D 1200 mm
Finishes Available No
Flip Top No
Trumpet MediumGAL-T-19
BH 430 mmBW 530 mm
Base Type Round
BD 530 mm
Max. S 800 mmMax. D 900 mm
Finishes Available No
Flip Top No
Trumpet SmallGAL-T-16
BH 430 mmBW 430 mm
Base Type Round
BD 430 mm
Max. S 700 mmMax. D 700 mm
Finishes Available No
Flip Top No
Bespoke Banquette Seating, Upholstered Panels and Assorted Loose Furniture to Match - Avon Beach, Christchurch
High Back Deep Diamond Button Banquette Seating with Side Chairs - The Grill, Aylesbury
INDOOR dining heightPart A - Section 6 - Tables and Bases
INDOOR dining height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 6
Page 64 Page 65
Aintree Single PedWCT-T-7
BH 710 mmBW 545 mm
Base Type 4 Leg
BD 545 mm
Max. S 800 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Aintree Twin PedWCT-T-8
BH 715 mmBW 1090 mm
Base Type Twin Pedestal
BD 525 mm
Max. S 1200 x 800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Bender 4AEC-T-1
BH 740 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 800 mmMax. D 900 mm
Finishes Available Yes
Flip Top No
Bender DobleAEC-T-3
BH 740 mmBW N/A mm
Base Type Twin Pedestal
BD 550 mm
Max. S 1200 x 800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Bistro (3 Leg)GAL-T-25
BH 730 mmBW 510 mm
Base Type 3 Leg
BD 470 mm
Max. S N/A mmMax. D 800 mm
Finishes Available No
Flip Top No
Bistro (4 Leg)GAL-T-27
BH 730 mmBW 430 mm
Base Type 4 Leg
BD 430 mm
Max. S 800 mmMax. D N/A mm
Finishes Available No
Flip Top No
Chester Single PedWCT-T-9
BH 715 mmBW 630 mm
Base Type 4 Leg
BD 630 mm
Max. S 800 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Chester Twin PedWCT-T-10
BH 715 mmBW 1160 mm
Base Type Twin Pedestal
BD 630 mm
Max. S 1200 x 800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Color-LibVTI-T-17
BH 730 mmBW 450 mm
Base Type Round
BD 450 mm
Max. S 700 mmMax. D 700 mm
Finishes Available Yes
Flip Top No
Cono-XVTI-T-5
BH 730 mmBW 205 mm
Base Type Round
BD 205 mm
Max. S TBC mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Danilo Round LargeTLO-T-74
BH 730 mmBW 600 mm
Base Type Round
BD 600 mm
Max. S 1100 mmMax. D 1200 mm
Finishes Available No
Flip Top No
Danilo Round MediumTLO-T-68
BH 730 mmBW 450 mm
Base Type Round
BD 450 mm
Max. S 700 mmMax. D 900 mm
Finishes Available No
Flip Top No
Danilo Square LargeTLO-T-77
BH 730 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 1000 mmMax. D 1200 mm
Finishes Available No
Flip Top No
Danilo Square MediumTLO-T-71
BH 730 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 800 mmMax. D 1000 mm
Finishes Available No
Flip Top No
Danilo Square Single PedestalTLO-T-65
BH 730 mmBW 400 mm
Base Type Rectangular
BD 600 mm
Max. S 800 x 1200 mmMax. D N/A mm
Finishes Available No
Flip Top No
Danilo Square TwinTLO-T-80
BH 730 mmBW 400 mm
Base Type Twin Pedestal
BD 750 mm
Max. S 900 x 1500 mmMax. D N/A mm
Finishes Available No
Flip Top No
Floorfix (Black)GAL-T-8
BH 720 mmBW 210 mm
Base Type Round
BD 210 mm
Max. S 700 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Floorfix (Stainless Steel)GAL-T-6
BH 720 mmBW 210 mm
Base Type Round
BD 210 mm
Max. S 700 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
INDOOR dining height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 6
Page 66 Page 67
Forza Round LargeTLO-T-47
BH 730 mmBW 600 mm
Base Type Round
BD 600 mm
Max. S 1000 mmMax. D 1300 mm
Finishes Available No
Flip Top No
Forza Round MediumTLO-T-38
BH 730 mmBW 450 mm
Base Type Round
BD 450 mm
Max. S 700 mmMax. D 900 mm
Finishes Available No
Flip Top No
Forza Round Medium LargeTLO-T-44
BH 730 mmBW 500 mm
Base Type Round
BD 500 mm
Max. S 800 mmMax. D 1000 mm
Finishes Available No
Flip Top No
Forza Round SmallTLO-T-32
BH 730 mmBW 400 mm
Base Type Round
BD 400 mm
Max. S 600 mmMax. D 700 mm
Finishes Available No
Flip Top No
Forza Square Extra LargeTLO-T-50
BH 730 mmBW 600 mm
Base Type Square
BD 600 mm
Max. S 1200 mmMax. D 1500 mm
Finishes Available No
Flip Top No
Forza Square MediumTLO-T-41
BH 730 mmBW 450 mm
Base Type Square
BD 450 mm
Max. S 900 mmMax. D 1200 mm
Finishes Available No
Flip Top No
Forza Square SmallTLO-T-35
BH 730 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 700 mmMax. D 1000 mm
Finishes Available No
Flip Top No
Forza Square Twin PedestalTLO-T-53
BH 730 mmBW 750 mm
Base Type Twin Pedestal
BD 400 mm
Max. S 900 x 1500 mmMax. D N/A mm
Finishes Available No
Flip Top No
JarVTI-T-21
BH 710 mmBW 410 mm
Base Type Round
BD 410 mm
Max. S 740 mmMax. D 600 mm
Finishes Available Yes
Flip Top No
LincolnGAL-T-100
BH 730 mmBW 810 mm
Base Type 5 Leg
BD 810 mm
Max. S 800 mmMax. D 1200 mm
Finishes Available No
Flip Top No
LincolnGAL-T-101
BH 730 mmBW mm
Base Type Twin Pedestal
BD 575 mm
Max. S 1800 x 750 mmMax. D N/A mm
Finishes Available No
Flip Top No
Lincoln LargeGAL-T-97
BH 730 mmBW 810 mm
Base Type 4 Leg
BD 810 mm
Max. S 800 mmMax. D 900 mm
Finishes Available No
Flip Top No
Lincoln SmallGAL-T-94
BH 730 mmBW 580 mm
Base Type 4 Leg
BD 580 mm
Max. S 700 mmMax. D 750 mm
Finishes Available No
Flip Top No
Mesa TrebolAEC-T-6
BH 740 mmBW 840 mm
Base Type 4 Leg
BD 840 mm
Max. S 900 x 900 mmMax. D 1000 mm
Finishes Available Yes
Flip Top No
Newbury Single PedWCT-T-1
BH 710 mmBW 545 mm
Base Type 4 Leg
BD 545 mm
Max. S 800 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Newbury Twin PedWCT-T-2
BH 715 mmBW 1090 mm
Base Type Twin Pedestal
BD 545 mm
Max. S 1200 x 800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Newmarket Single PedWCT-T-3
BH 710 mmBW 525 mm
Base Type 4 Leg
BD 525 mm
Max. S 800 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Newmarket Twin PedWCT-T-4
BH 715 mmBW 1090 mm
Base Type Twin Pedestal
BD 525 mm
Max. S 1200 x 800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
INDOOR dining height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 6
Page 68 Page 69
Orlando Chrome LargeTLO-T-23
BH 730 mmBW 840 mm
Base Type 4 Leg
BD 840 mm
Max. S 1200 mmMax. D 1300 mm
Finishes Available Yes
Flip Top No
Orlando Chrome MediumTLO-T-17
BH 730 mmBW 760 mm
Base Type 4 Leg
BD 760 mm
Max. S 1000 mmMax. D 1200 mm
Finishes Available Yes
Flip Top No
Orlando Chrome SmallTLO-T-11
BH 730 mmBW 560 mm
Base Type 4 Leg
BD 560 mm
Max. S 700 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Orlando Chrome TwinTLO-T-29
BH 730 mmBW 550 mm
Base Type Twin Pedestal
BD N/A mm
Max. S 1000 x 1800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Orlando LargeTLO-T-20
BH 730 mmBW 840 mm
Base Type 4 Leg
BD 840 mm
Max. S 1200 mmMax. D 1300 mm
Finishes Available Yes
Flip Top No
Orlando MediumTLO-T-14
BH 730 mmBW 760 mm
Base Type 4 Leg
BD 760 mm
Max. S 1000 mmMax. D 1200 mm
Finishes Available Yes
Flip Top No
Orlando SmallTLO-T-8
BH 730 mmBW 560 mm
Base Type 4 Leg
BD 560 mm
Max. S 700 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Orlando TwinTLO-T-26
BH 730 mmBW 550 mm
Base Type Twin Pedestal
BD N/A mm
Max. S 1000 x 1800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle (Round Column)GAL-T-66
BH 720 mmBW 400 mm
Base Type Rectangular
BD 600 mm
Max. S 1100 x 700 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle (Square Column)GAL-T-62
BH 720 mmBW 400 mm
Base Type Rectangular
BD 600 mm
Max. S 1100 x 700 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle SS (Round Column)GAL-T-68
BH 720 mmBW 400 mm
Base Type Rectangular
BD 600 mm
Max. S 1100 x 700 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle SS (Square Column)GAL-T-64
BH 720 mmBW 400 mm
Base Type Rectangular
BD 600 mm
Max. S 1100 x 700 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle Twin PedestalGAL-T-70
BH 720 mmBW 400 mm
Base Type Twin Pedestal
BD 700 mm
Max. S 1400 x 800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle Twin PedestalGAL-T-76
BH 720 mmBW 400 mm
Base Type Twin Pedestal
BD 700 mm
Max. S 1400 x 800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle Twin Pedestal SSGAL-T-73
BH 720 mmBW 400 mm
Base Type Twin Pedestal
BD 700 mm
Max. S 1400 x 800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle Twin Pedestal SSGAL-T-79
BH 720 mmBW 400 mm
Base Type Twin Pedestal
BD 700 mm
Max. S 1400 x 800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Round Large (Round Column)GAL-T-88
BH 720 mmBW 600 mm
Base Type Round
BD 600 mm
Max. S 1150 mmMax. D 1200 mm
Finishes Available Yes
Flip Top No
Profile Round Large SS (Round Column)GAL-T-91
BH 720 mmBW 600 mm
Base Type Round
BD 600 mm
Max. S 1150 mmMax. D 1200 mm
Finishes Available Yes
Flip Top No
INDOOR dining height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 6
Page 70 Page 71
Profile Round Small (Round Column)GAL-T-82
BH 720 mmBW 430 mm
Base Type Round
BD 430 mm
Max. S 750 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Profile Round Small SS (Round Column)GAL-T-85
BH 720 mmBW 430 mm
Base Type Round
BD 430 mm
Max. S 750 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Profile Square Large (Round Column)GAL-T-56
BH 720 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 1000 mmMax. D 1100 mm
Finishes Available Yes
Flip Top No
Profile Square Large (Square Column)GAL-T-44
BH 720 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 1000 mmMax. D 1100 mm
Finishes Available Yes
Flip Top No
Profile Square Large SS (Round Column)GAL-T-59
BH 720 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 1000 mmMax. D 1100 mm
Finishes Available Yes
Flip Top No
Profile Square Large SS (Square Column)GAL-T-47
BH 720 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 1000 mmMax. D 1100 mm
Finishes Available Yes
Flip Top No
Profile Square Small (Round Column)GAL-T-50
BH 720 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 800 mmMax. D 850 mm
Finishes Available Yes
Flip Top No
Profile Square Small (Square Column)GAL-T-38
BH 720 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 800 mmMax. D 850 mm
Finishes Available Yes
Flip Top No
Profile Square Small SS (Round Column)GAL-T-53
BH 720 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 800 mmMax. D 850 mm
Finishes Available Yes
Flip Top No
Profile Square Small SS (Square Column)GAL-T-41
BH 720 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 800 mmMax. D 850 mm
Finishes Available Yes
Flip Top No
Pyramid RectangularGAL-T-31
BH 720 mmBW 425 mm
Base Type Rectangular
BD 550 mm
Max. S 1100 x 700 mmMax. D N/A mm
Finishes Available No
Flip Top No
Pyramid SquareGAL-T-29
BH 720 mmBW 425 mm
Base Type Square
BD 425 mm
Max. S 750 mmMax. D 800 mm
Finishes Available No
Flip Top No
Quattro MediumTLO-T-59
BH 730 mmBW 430 mm
Base Type Square
BD 430 mm
Max. S 800 mmMax. D 1000 mm
Finishes Available No
Flip Top No
Quattro Single PedestalTLO-T-56
BH 730 mmBW 400 mm
Base Type Rectangular
BD 550 mm
Max. S 800 x 1200 mmMax. D N/A mm
Finishes Available No
Flip Top No
Quattro TwinTLO-T-62
BH 730 mmBW 800 mm
Base Type Twin Pedestal
BD 400 mm
Max. S 900 x 1600 mmMax. D N/A mm
Finishes Available No
Flip Top No
RoundedVTI-T-3
BH 730 mmBW 420 mm
Base Type Square
BD 420 mm
Max. S 900 mmMax. D 900 mm
Finishes Available Yes
Flip Top No
Rounded-LibVTI-T-1
BH 730 mmBW 420 mm
Base Type Square
BD 420 mm
Max. S 900 mmMax. D 900 mm
Finishes Available Yes
Flip Top No
Slim BorgVTI-T-23
BH 730 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 800 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
INDOOR dining height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 6
Page 72 Page 73
Slim-LibVTI-T-20
BH 730 mmBW 450 mm
Base Type Round
BD 450 mm
Max. S 700 mmMax. D 700 mm
Finishes Available Yes
Flip Top No
Southwold LargeGAL-T-14
BH 720 mmBW 750 mm
Base Type Round
BD 750 mm
Max. S 1050 mmMax. D 1200 mm
Finishes Available No
Flip Top No
Southwold MediumGAL-T-12
BH 720 mmBW 550 mm
Base Type Round
BD 550 mm
Max. S 850 mmMax. D 900 mm
Finishes Available No
Flip Top No
Southwold SmallGAL-T-10
BH 720 mmBW 430 mm
Base Type Round
BD 430 mm
Max. S 650 mmMax. D 700 mm
Finishes Available No
Flip Top No
Step RoundGAL-T-35
BH 720 mmBW 425 mm
Base Type Round
BD 425 mm
Max. S 750 mmMax. D 800 mm
Finishes Available No
Flip Top No
Step SquareGAL-T-33
BH 720 mmBW 425 mm
Base Type Square
BD 425 mm
Max. S 800 mmMax. D 850 mm
Finishes Available No
Flip Top No
ToolAET-T-2
BH 750 mmBW N/A mm
Base Type 3 Leg
BD N/A mm
Max. S N/A mmMax. D 700 mm
Finishes Available Yes
Flip Top No
Trumpet LargeGAL-T-23
BH 720 mmBW 600 mm
Base Type Round
BD 600 mm
Max. S 1000 mmMax. D 1200 mm
Finishes Available No
Flip Top No
Trumpet MediumGAL-T-20
BH 720 mmBW 530 mm
Base Type Round
BD 530 mm
Max. S 800 mmMax. D 900 mm
Finishes Available No
Flip Top No
Trumpet SmallGAL-T-17
BH 720 mmBW 430 mm
Base Type Round
BD 430 mm
Max. S 700 mmMax. D 700 mm
Finishes Available No
Flip Top No
WebVTI-T-7
BH 710 mmBW 410 mm
Base Type Round
BD 410 mm
Max. S TBC mmMax. D 600 mm
Finishes Available Yes
Flip Top No
Frida Side Chair - See Page 16
Curved Booth Banquette Seating Complete with an Assortment of Loose Furniture - Tiien Thai, Bournemouth
Contemporary, Bespoke Banquette Seating for a Luxury Restaurant - Rick Stein, Marlborough
INDOOR poseur heightPart A - Section 7 - Tables and Bases
INDOOR poseur height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 7
Page 76 Page 77
Bender AltaAEC-T-2
BH 1120 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 700 mmMax. D 700 mm
Finishes Available Yes
Flip Top No
Bistro (3 Leg)GAL-T-26
BH 1100 mmBW 510 mm
Base Type 3 Leg
BD 470 mm
Max. S N/A mmMax. D 600 mm
Finishes Available No
Flip Top No
Bistro (4 Leg)GAL-T-28
BH 1100 mmBW 430 mm
Base Type 4 Leg
BD 430 mm
Max. S 700 mmMax. D N/A mm
Finishes Available No
Flip Top No
Cono-XVTI-T-6
BH 1100 mmBW 205 mm
Base Type Round
BD 205 mm
Max. S 600 mmMax. D 600 mm
Finishes Available Yes
Flip Top No
Danilo Round LargeTLO-T-75
BH 1050 mmBW 600 mm
Base Type Round
BD 600 mm
Max. S 1100 mmMax. D 1200 mm
Finishes Available No
Flip Top No
Danilo Round MediumTLO-T-69
BH 1050 mmBW 450 mm
Base Type Round
BD 450 mm
Max. S 700 mmMax. D 900 mm
Finishes Available No
Flip Top No
Danilo Square LargeTLO-T-78
BH 1050 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 1000 mmMax. D 1200 mm
Finishes Available No
Flip Top No
Danilo Square MediumTLO-T-72
BH 1050 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 800 mmMax. D 1000 mm
Finishes Available No
Flip Top No
Danilo Square Single PedestalTLO-T-66
BH 1050 mmBW 400 mm
Base Type Rectangular
BD 600 mm
Max. S 800 x 1200 mmMax. D N/A mm
Finishes Available No
Flip Top No
Danilo Square TwinTLO-T-81
BH 1050 mmBW 400 mm
Base Type Twin Pedestal
BD 750 mm
Max. S 900 x 1500 mmMax. D N/A mm
Finishes Available No
Flip Top No
Floorfix (Black)GAL-T-9
BH 1080 mmBW 210 mm
Base Type Round
BD 210 mm
Max. S 700 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Floorfix (Stainless Steel)GAL-T-7
BH 1080 mmBW 210 mm
Base Type Round
BD 210 mm
Max. S 700 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Forza Round LargeTLO-T-48
BH 1050 mmBW 600 mm
Base Type Round
BD 600 mm
Max. S 1000 mmMax. D 1300 mm
Finishes Available No
Flip Top No
Forza Round MediumTLO-T-39
BH 1050 mmBW 450 mm
Base Type Round
BD 450 mm
Max. S 700 mmMax. D 900 mm
Finishes Available No
Flip Top No
Forza Round Medium LargeTLO-T-45
BH 1050 mmBW 500 mm
Base Type Round
BD 500 mm
Max. S 800 mmMax. D 1000 mm
Finishes Available No
Flip Top No
Forza Round SmallTLO-T-33
BH 1050 mmBW 400 mm
Base Type Round
BD 400 mm
Max. S 600 mmMax. D 700 mm
Finishes Available No
Flip Top No
Forza Square Extra LargeTLO-T-51
BH 1050 mmBW 600 mm
Base Type Square
BD 600 mm
Max. S 1200 mmMax. D 1500 mm
Finishes Available No
Flip Top No
Forza Square MediumTLO-T-42
BH 1050 mmBW 450 mm
Base Type Square
BD 450 mm
Max. S 900 mmMax. D 1200 mm
Finishes Available No
Flip Top No
INDOOR poseur height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 7
Page 78 Page 79
Forza Square SmallTLO-T-36
BH 1050 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 700 mmMax. D 1000 mm
Finishes Available No
Flip Top No
Forza Square Twin PedestalTLO-T-54
BH 1050 mmBW 750 mm
Base Type Twin Pedestal
BD 400 mm
Max. S 900 x 1500 mmMax. D N/A mm
Finishes Available No
Flip Top No
JarVTI-T-22
BH 1100 mmBW 410 mm
Base Type Round
BD 410 mm
Max. S 740 mmMax. D 600 mm
Finishes Available Yes
Flip Top No
Lincoln LargeGAL-T-98
BH 1100 mmBW 810 mm
Base Type 4 Leg
BD 810 mm
Max. S 800 mmMax. D 850 mm
Finishes Available No
Flip Top No
Lincoln SmallGAL-T-95
BH 1100 mmBW 580 mm
Base Type 4 Leg
BD 580 mm
Max. S N/A mmMax. D 600 mm
Finishes Available No
Flip Top No
Orlando Chrome LargeTLO-T-24
BH 1050 mmBW 840 mm
Base Type 4 Leg
BD 840 mm
Max. S 1200 mmMax. D 1300 mm
Finishes Available Yes
Flip Top No
Orlando Chrome MediumTLO-T-18
BH 1050 mmBW 760 mm
Base Type 4 Leg
BD 760 mm
Max. S 1000 mmMax. D 1200 mm
Finishes Available Yes
Flip Top No
Orlando Chrome SmallTLO-T-12
BH 1050 mmBW 560 mm
Base Type 4 Leg
BD 560 mm
Max. S 700 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Orlando Chrome TwinTLO-T-30
BH 1050 mmBW 550 mm
Base Type Twin Pedestal
BD N/A mm
Max. S 1000 x 1800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Orlando LargeTLO-T-21
BH 1050 mmBW 840 mm
Base Type 4 Leg
BD 840 mm
Max. S 1200 mmMax. D 1300 mm
Finishes Available Yes
Flip Top No
Orlando MediumTLO-T-15
BH 1050 mmBW 760 mm
Base Type 4 Leg
BD 760 mm
Max. S 1000 mmMax. D 1200 mm
Finishes Available Yes
Flip Top No
Orlando SmallTLO-T-9
BH 1050 mmBW 560 mm
Base Type 4 Leg
BD 560 mm
Max. S 700 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Orlando TwinTLO-T-27
BH 1050 mmBW 550 mm
Base Type Twin Pedestal
BD N/A mm
Max. S 1000 x 1800 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle Twin PedestalGAL-T-71
BH 1080 mmBW 400 mm
Base Type Twin Pedestal
BD 700 mm
Max. S 1000 x 700 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle Twin PedestalGAL-T-77
BH 1080 mmBW 400 mm
Base Type Twin Pedestal
BD 700 mm
Max. S 1000 x 700 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle Twin Pedestal SSGAL-T-74
BH 1080 mmBW 400 mm
Base Type Twin Pedestal
BD 700 mm
Max. S 1000 x 700 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Rectangle Twin Pedestal SSGAL-T-80
BH 1080 mmBW 400 mm
Base Type Twin Pedestal
BD 700 mm
Max. S 1000 x 700 mmMax. D N/A mm
Finishes Available Yes
Flip Top No
Profile Round Large (Round Column)GAL-T-89
BH 1080 mmBW 600 mm
Base Type Round
BD 600 mm
Max. S 800 mmMax. D 900 mm
Finishes Available Yes
Flip Top No
INDOOR poseur height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 7
Page 80 Page 81
Profile Round Large SS (Round Column)GAL-T-92
BH 1080 mmBW 600 mm
Base Type Round
BD 600 mm
Max. S 800 mmMax. D 900 mm
Finishes Available Yes
Flip Top No
Profile Round Small (Round Column)GAL-T-83
BH 1080 mmBW 430 mm
Base Type Round
BD 430 mm
Max. S 650 mmMax. D 650 mm
Finishes Available Yes
Flip Top No
Profile Round Small SS (Round Column)GAL-T-86
BH 1080 mmBW 430 mm
Base Type Round
BD 430 mm
Max. S 650 mmMax. D 650 mm
Finishes Available Yes
Flip Top No
Profile Square Large (Round Column)GAL-T-57
BH 1080 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 750 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Profile Square Large (Square Column)GAL-T-45
BH 1080 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 750 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Profile Square Large SS (Round Column)GAL-T-60
BH 1080 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 750 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Profile Square Large SS (Square Column)GAL-T-48
BH 1080 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 750 mmMax. D 800 mm
Finishes Available Yes
Flip Top No
Profile Square Small (Round Column)GAL-T-51
BH 1080 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 650 mmMax. D 700 mm
Finishes Available Yes
Flip Top No
Profile Square Small (Square Column)GAL-T-39
BH 1080 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 650 mmMax. D 700 mm
Finishes Available Yes
Flip Top No
Profile Square Small SS (Round Column)GAL-T-54
BH 1080 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 650 mmMax. D 700 mm
Finishes Available Yes
Flip Top No
Profile Square Small SS (Square Column)GAL-T-42
BH 1080 mmBW 400 mm
Base Type Square
BD 400 mm
Max. S 650 mmMax. D 700 mm
Finishes Available Yes
Flip Top No
Pyramid RectangularGAL-T-32
BH 1080 mmBW 425 mm
Base Type Rectangular
BD 550 mm
Max. S 800 x 600 mmMax. D N/A mm
Finishes Available No
Flip Top No
Pyramid SquareGAL-T-30
BH 1080 mmBW 425 mm
Base Type Square
BD 425 mm
Max. S 650 mmMax. D 700 mm
Finishes Available No
Flip Top No
Quattro MediumTLO-T-60
BH 1050 mmBW 430 mm
Base Type Square
BD 430 mm
Max. S 800 mmMax. D 1000 mm
Finishes Available No
Flip Top No
Quattro Single PedestalTLO-T-57
BH 1050 mmBW 400 mm
Base Type Rectangular
BD 550 mm
Max. S 800 x 1200 mmMax. D N/A mm
Finishes Available No
Flip Top No
Quattro TwinTLO-T-63
BH 1050 mmBW 800 mm
Base Type Twin Pedestal
BD 400 mm
Max. S 900 x 1600 mmMax. D N/A mm
Finishes Available No
Flip Top No
RoundedVTI-T-4
BH 1100 mmBW 420 mm
Base Type Square
BD 420 mm
Max. S 600 mmMax. D 600 mm
Finishes Available Yes
Flip Top No
Rounded-LibVTI-T-2
BH 1100 mmBW 420 mm
Base Type Square
BD 420 mm
Max. S 600 mmMax. D 600 mm
Finishes Available Yes
Flip Top No
INDOOR poseur height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue
Page 82
Southwold LargeGAL-T-15
BH 1080 mmBW 750 mm
Base Type Round
BD 850 mm
Max. S 850 mmMax. D 900 mm
Finishes Available No
Flip Top No
Southwold MediumGAL-T-13
BH 1080 mmBW 550 mm
Base Type Round
BD 550 mm
Max. S 750 mmMax. D 800 mm
Finishes Available No
Flip Top No
Southwold SmallGAL-T-11
BH 1080 mmBW 430 mm
Base Type Round
BD 430 mm
Max. S 600 mmMax. D 600 mm
Finishes Available No
Flip Top No
Step RoundGAL-T-36
BH 1080 mmBW 425 mm
Base Type Round
BD 425 mm
Max. S 650 mmMax. D 700 mm
Finishes Available No
Flip Top No
Step SquareGAL-T-34
BH 1080 mmBW 425 mm
Base Type Square
BD 425 mm
Max. S 600 mmMax. D 600 mm
Finishes Available No
Flip Top No
Trumpet LargeGAL-T-24
BH 1100 mmBW 600 mm
Base Type Round
BD 600 mm
Max. S 600 mmMax. D 850 mm
Finishes Available No
Flip Top No
Trumpet MediumGAL-T-21
BH 1100 mmBW 530 mm
Base Type Round
BD 530 mm
Max. S 700 mmMax. D 650 mm
Finishes Available No
Flip Top No
Trumpet SmallGAL-T-18
BH 1100 mmBW 430 mm
Base Type Round
BD 430 mm
Max. S 600 mmMax. D 600 mm
Finishes Available No
Flip Top No
INDOOR stock table topsPart A - Section 8
INDOOR stock table topsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 8
Page 84 Page 85
Introduction to Stock Table TopsA range of stock-sized table tops are offered in a multitude of finishes and sizes. Stock table tops are often more economical than bespoke sizes, with generally faster lead times.
Our friendly team will be on hand to assist with any enquires or questions you may have.
25 mm Premium LaminateThese premium tops are of the highest quality; perfectly suited to a range of end uses such as restaurants, bars, cafés and bistros.
They are manufactured within the United Kingdom, are scratch resistant, and boast an impressive 180°C heat resistance. These are offered in 25 mm thickness, with an MDF core and ABS edging for a sleek and professional finish.
25 mm MFCStanding for ‘melamine’, these 25 mm thick MFC table tops are also made in the United Kingdom. With increased durability, these are particularly suited to busy and high-traffic environments.
These easy to clean tops are heat resistant to 140°C, and feature a strong chipboard core with sides wrapped in 2mm impact resistant ABS edging.
Solid WoodThese solid-wood beech table tops come stock stained in either oak, walnut or wenge. They can also be supplied ‘RTF’ or ‘Ready to Finish’. Made in Italy, they exude quality with a distinct aesthetic only possible with real solid wood construction. They have a specialised polyurethane coating to protect against spills and scratches.
25 mm MFC BeechTLO-TT-19
Shape RoundCM Chipboard
1000 mm
600 mm
800 mm700 mm
Thickness 25 mm
1200 mm
25 mm MFC BeechTLO-TT-20
Shape SquareCM Chipboard600 mm
800 mm700 mm
Thickness 25 mm
25 mm MFC BeechTLO-TT-21
Shape RectangularCM Chipboard
1500 x 700 mm
1000 x 600 mm
1200 x 800 mm1200 x 700 mm
Thickness 25 mm
25 mm MFC GreyTLO-TT-22
Shape RoundCM Chipboard
1000 mm
600 mm
800 mm700 mm
Thickness 25 mm
1200 mm
25 mm MFC GreyTLO-TT-23
Shape SquareCM Chipboard600 mm
800 mm700 mm
Thickness 25 mm
25 mm MFC GreyTLO-TT-24
Shape RectangularCM Chipboard
1500 x 700 mm
1000 x 600 mm
1200 x 800 mm1200 x 700 mm
Thickness 25 mm
25 mm MFC WalnutTLO-TT-25
Shape RoundCM Chipboard
1000 mm
600 mm
800 mm700 mm
Thickness 25 mm
1200 mm
25 mm MFC WalnutTLO-TT-26
Shape SquareCM Chipboard600 mm
800 mm700 mm
Thickness 25 mm
25 mm MFC WalnutTLO-TT-27
Shape RectangularCM Chipboard
1500 x 700 mm
1000 x 600 mm
1200 x 800 mm1200 x 700 mm
Thickness 25 mm
INDOOR stock table topsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 8
Page 86 Page 87
25 mm MFC WengeTLO-TT-28
Shape RoundCM Chipboard
1000 mm
600 mm
800 mm700 mm
Thickness 25 mm
1200 mm
25 mm MFC WengeTLO-TT-29
Shape SquareCM Chipboard600 mm
800 mm700 mm
Thickness 25 mm
25 mm MFC WengeTLO-TT-30
Shape RectangularCM Chipboard
1500 x 700 mm
1000 x 600 mm
1200 x 800 mm1200 x 700 mm
Thickness 25 mm
25 mm MFC WhiteTLO-TT-31
Shape RoundCM Chipboard
1000 mm
600 mm
800 mm700 mm
Thickness 25 mm
1200 mm
25 mm MFC WhiteTLO-TT-32
Shape SquareCM Chipboard600 mm
800 mm700 mm
Thickness 25 mm
25 mm MFC WhiteTLO-TT-33
Shape RectangularCM Chipboard
1500 x 700 mm
1000 x 600 mm
1200 x 800 mm1200 x 700 mm
Thickness 25 mm
25 mm MFC WhiteTLO-TT-34
Shape OvalCM Chipboard1400 x 800 mmThickness 25 mm
25 mm Premium Laminate BeechTLO-TT-1
Shape RoundCM MDF
900 mm
600 mm
800 mm700 mm
Thickness 25 mm
1000 mm
1200 mm1200 mm
25 mm Premium Laminate BeechTLO-TT-2
Shape SquareCM MDF
800 mm
500 mm
700 mm600 mm
Thickness 25 mm
900 mm
25 mm Premium Laminate BeechTLO-TT-3
Shape RectangularCM MDF
1200 x 600 mm
1000 x 500 mm
1100 x 700 mm1000 x 600 mm
Thickness 25 mm
1200 x 700 mm
1200 x 800 mm1200 x 800 mm
25 mm Premium Laminate BlackTLO-TT-4
Shape RoundCM MDF
900 mm
600 mm
800 mm700 mm
Thickness 25 mm
1000 mm1200 mm
25 mm Premium Laminate BlackTLO-T-5
Shape SquareCM MDF
800 mm
500 mm
700 mm600 mm
Thickness 25 mm
900 mm
25 mm Premium Laminate BlackTLO-TT-6
Shape RectangularCM MDF
1200 x 600 mm
1000 x 500 mm
1100 x 700 mm1000 x 600 mm
Thickness 25 mm
1200 x 700 mm
1200 x 800 mm1200 x 800 mm
25 mm Premium Laminate OakTLO-TT-7
Shape RoundCM MDF
900 mm
600 mm
800 mm700 mm
Thickness 25 mm
1000 mm1200 mm
25 mm Premium Laminate OakTLO-TT-8
Shape SquareCM MDF
800 mm
500 mm
700 mm600 mm
Thickness 25 mm
900 mm
25 mm Premium Laminate OakTLO-TT-9
Shape RectangularCM MDF
1200 x 600 mm
1000 x 500 mm
1100 x 700 mm1000 x 600 mm
Thickness 25 mm
1200 x 700 mm
1200 x 800 mm1200 x 800 mm
25 mm Premium Laminate WalnutTLO-TT-10
Shape RoundCM MDF
900 mm
600 mm
800 mm700 mm
Thickness 25 mm
1000 mm1200 mm
25 mm Premium Laminate WalnutTLO-TT-11
Shape SquareCM MDF
800 mm
500 mm
700 mm600 mm
Thickness 25 mm
900 mm
INDOOR stock table topsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 8
Page 88 Page 89
25 mm Premium Laminate WalnutTLO-TT-12
Shape RectangularCM MDF
1200 x 600 mm
1000 x 500 mm
1100 x 700 mm1000 x 600 mm
Thickness 25 mm
1200 x 700 mm
1200 x 800 mm1200 x 800 mm
25 mm Premium Laminate WengeTLO-TT-13
Shape RoundCM MDF
900 mm
600 mm
800 mm700 mm
Thickness 25 mm
1000 mm1200 mm
25 mm Premium Laminate WengeTLO-TT-14
Shape SquareCM MDF
800 mm
500 mm
700 mm600 mm
Thickness 25 mm
900 mm
25 mm Premium Laminate WengeTLO-TT-15
Shape RectangularCM MDF
1200 x 600 mm
1000 x 500 mm
1100 x 700 mm1000 x 600 mm
Thickness 25 mm
1200 x 700 mm
1200 x 800 mm1200 x 800 mm
25 mm Premium Laminate WhiteTLO-TT-16
Shape RoundCM MDF
900 mm
600 mm
800 mm700 mm
Thickness 25 mm
1000 mm1200 mm
25 mm Premium Laminate WhiteTLO-TT-17
Shape SquareCM MDF
800 mm
500 mm
700 mm600 mm
Thickness 25 mm
900 mm
25 mm Premium Laminate WhiteTLO-TT-18
Shape RectangularCM MDF
1200 x 600 mm
1000 x 500 mm
1100 x 700 mm1000 x 600 mm
Thickness 25 mm
1200 x 700 mm
1200 x 800 mm1200 x 800 mm
Shape Rectangular1200 x 700 mm
26 mm Solid Wood RTFTLO-TT-38
Shape RoundCM Solid Wood 600 mm
800 mm700 mm
Thickness 26 mm Shape Square600 mm
800 mm700 mm
Shape Rectangular1200 x 700 mm
26 mm Solid Wood WalnutTLO-TT-41
Shape RoundCM Solid Wood 600 mm
800 mm700 mm
Thickness 26 mm Shape Square600 mm
800 mm700 mm
Shape Rectangular1200 x 700 mm
26 mm Solid Wood WengeTLO-TT-44
Shape RoundCM Solid Wood 600 mm
800 mm700 mm
Thickness 26 mm Shape Square600 mm
800 mm700 mm
Shape Rectangular1200 x 700 mm
26 mm Solid Wood OakTLO-TT-35
Shape RoundCM Solid Wood 600 mm
800 mm700 mm
Thickness 26 mm Shape Square600 mm
800 mm700 mm
TLO-TT-36 TLO-TT-37
TLO-TT-39 TLO-TT-40
TLO-TT-42 TLO-TT-43
TLO-TT-45 TLO-TT-46
Page 90
Atlas Oak Leaf High Stool - See Page 46
Contemporary, Bespoke Banquette Seating for a Luxury Restaurant - Side Chairs and Elegant Dining Tables to Suit
INDOOR bespoke table topsPart A - Section 9
INDOOR bespoke table topsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 9
Page 92 Page 93
About Our ServiceHaving difficulty finding a stock table top to suit your requirements? Atlas Contract Furniture are proud to offer an entirely bespoke service utilising our in-house spray facility.
ExperienceOur Team of experts get it right
every time.
EfficientWe offer a fast and efficient service utilising our in-house
spray facility.
Matching ServiceWe can match any colour or
effect.
STEP 1 - Bespoke Sizes and ShapesWe understand that every project is different.
Unusual wall angles and room geometry will often limit conventional, stock items.
Atlas will cut tops to your specification - any size, any shape.
Our team are able to offer advice on set-outs, seating layouts, ergonomics and more. Please get in touch with any questions you may have.
STEP 2 - Selecting a BaseChoosing a base to suit your
requirements could not be simpler.
Coffee, Dining or Poseur Height? Pick from one of the
many catalogued bases we have to offer - you will find all the necessary dimensions, in
addition to details on maximum top sizes.
Make a note of the Product Name and Code.
We also offer our bespoke tops service for bases supplied
outside of the catalogue.
QualityOnly the highest quality
products have been selected for use in our finishes.
SatisfactionOur strict quality control
procedures guarantee customer satisfaction.
Contact UsContact us today for advice
on your next project, and a no obligation quotation.
About Our ServiceWe are specialists in bespoke finishing services, offering a turn-key solution to your next project. Bespoke Sizes, Edge Mouldings, and Custom Finishes
INDOOR bespoke table topsAtlas Contract Furniture - Loose Furniture Catalogue Part A, Section 9
Page 94 Page 95
StainsStaining penetrates the wood with pigments of your choice. There are endless colours and intensities to choose from.
LacquersDurable finishes that assist in preventing wear and tear. Ours hold up to years of contact use with the correct maintenance.
Solid ColoursA uniform one-colour finish given in reference to a colour chart system such as RAL. We also offer a colour matching service.
STEP 3 - Our FinishesAtlas offer an array of finishes across both solid and veneered timbers. Our friendly team will be happy to assist with your enquiry.
AntiquingUnique application of colour to make the given product appear aged.
DistressingTypically used in addition to antiquing; the material is skilfully worn, scuffed and distressed for a characteristic charm.
Rubbed Through Paint FinishesUnique lacquering and sanding techniques expose areas of darker paint coats, giving a rustic ‘shabby chic’ look.
Polyester Deep GlossingA thick, mirror-like finish that captures a luxurious and modern aesthetic. Polyester build layers with a polyurethane top coat.
Liqui-MetAvailable in 10 different colours, Liqui-Met’s sprayable metal coating gives any substrate a solid metal appearance.
Barrier / Fire CoatingsFrom antibacterial coatings through to Class 0 and Class 1 fire retardant coatings - we offer a range of specialist finishes.
STEP 4 - Edge ProfilesEdge profiles can be applied to any top, offering a custom finish to any project. Designs can range from subtle details such as Bevel, through to more extravagant designs like Waterfall.
SquareStraight edging that offers clean lines to any top.
BevelAn angled cut across the leading edge.
ConvexBoth leading edges have been softened.
UndercutElegant and contemporary profile that undercuts the table edge.
Half OvoloA rounded and convex profile across one leading edge.
WaterfallCascading appearance for added design flare.
Half Bull NoseRounded upper edged profile.
Bull NoseBoth leading edges are rounded.
Page 96
Nassau Outdoor Side Chair - See Page 99
OUTDOOR side chairsPart B - Section 1
OUTDOOR side chairsAtlas Contract Furniture - Loose Furniture Catalogue Part B, Section 1
Page 98 Page 99
AntoniettaEMU-S-2
BH 890 mmSW 490 mmSH 450 mm
SD 560 mm
Stacking 4Upholstered No
Café Side ChairZNG-S-1
BH 860 mmSW 440 mmSH 450 mm
SD 500 mm
Stacking NoUpholstered No
Closerie ChairRER-S-10
BH 880 mmSW 455 mmSH 450 mm
SD 530 mm
Stacking YesUpholstered No
CocoAEC-S-8
BH 810 mmSW 420 mmSH 470 mm
SD 510 mm
Stacking 12Upholstered No
Dalia ChairCAL-S-2
BH 810 mmSW 420 mmSH 450 mm
SD 610 mm
Stacking 6Upholstered No
Dalia ChairRER-S-2
BH 900 mmSW 530 mmSH 450 mm
SD 570 mm
Stacking YesUpholstered No
DarwinEMU-S-4
BH 770 mmSW 530 mmSH 450 mm
SD 530 mm
Stacking 8Upholstered No
EchoMIL-S-5
BH 830 mmSW 580 mmSH 460 mm
SD 540 mm
Stacking 4Upholstered Available
FlintMIL-S-9
BH 810 mmSW 530 mmSH 460 mm
SD 530 mm
Stacking 4Upholstered Available
Hardy Side ChairZNG-S-10
BH 890 mmSW 430 mmSH 450 mm
SD 580 mm
Stacking NoUpholstered No
IrisGER-S-4
BH 880 mmSW 450 mmSH 450 mm
SD 540 mm
Stacking 5Upholstered No
Likewood Side ChairZNG-S-3
BH 850 mmSW 470 mmSH 450 mm
SD 490 mm
Stacking YesUpholstered No
LinkGER-S-6
BH 860 mmSW 480 mmSH 450 mm
SD 570 mm
Stacking 4Upholstered No
Lutetia ChairRER-S-7
BH 780 mmSW 465 mmSH 460 mm
SD 510 mm
Stacking YesUpholstered No
LyzeEMU-S-7
BH 790 mmSW 470 mmSH 450 mm
SD 540 mm
Stacking 6Upholstered No
Mallorca ChairIAR-S-2
BH 840 mmSW 430 mmSH 490 mm
SD 500 mm
Stacking YesUpholstered No
MinervaAEC-S-11
BH 810 mmSW 420 mmSH 470 mm
SD 510 mm
Stacking 12Upholstered No
NassauMIL-S-2
BH 820 mmSW 440 mmSH 470 mm
SD 490 mm
Stacking 8Upholstered Available
OUTDOOR side chairsAtlas Contract Furniture - Loose Furniture Catalogue Part B, Section 1
Page 100 Page 101
Paname ChairRER-S-4
BH 780 mmSW 465 mmSH 460 mm
SD 510 mm
Stacking YesUpholstered No
RandaAET-S-15
BH 800 mmSW 490 mmSH 450 mm
SD 560 mm
Stacking 3Upholstered No
Rock Side ChairZNG-S-4
BH 870 mmSW 490 mmSH 460 mm
SD 520 mm
Stacking YesUpholstered No
Shadow ChairRER-S-15
BH 805 mmSW 500 mmSH 480 mm
SD 550 mm
Stacking 8Upholstered No
StripesMIL-S-29
BH 820 mmSW 480 mmSH 460 mm
SD 540 mm
Stacking 4Upholstered No
Time Side ChairZNG-S-8
BH 830 mmSW 460 mmSH 450 mm
SD 570 mm
Stacking NoUpholstered No
UniMIL-S-32
BH 790 mmSW 490 mmSH 460 mm
SD 530 mm
Stacking 4Upholstered Available
UniMIL-S-34
BH 790 mmSW 440 mmSH 460 mm
SD 520 mm
Stacking NoUpholstered Available
Wharf SidechairWCT-S-16
BH 810 mmSW 460 mmSH 460 mm
SD 630 mm
Stacking YesUpholstered No
ZebraAET-S-5
BH 800 mmSW 540 mmSH 450 mm
SD 560 mm
Stacking 4Upholstered No
Zoom Side ChairZNG-S-6
BH 820 mmSW 540 mmSH 450 mm
SD 560 mm
Stacking YesUpholstered No
American Diner Fluted Banquette Seating with Twin Poseur Table Bases - The Diner, Ringwood
Page 102
Bespoke Float Button Back Banquette Seating With Accompanying Side Chairs - The Red Lion, Basingstoke
Deep Button Back Banquette Seating, Complete with Side Chairs and Dining Tables - Balans Soho Society, Clapham, London
OUTDOOR armchairs
Part B - Section 2
OUTDOOR armchairsAtlas Contract Furniture - Loose Furniture Catalogue Part B, Section 2
Page 104 Page 105
AntoniettaEMU-S-1
BH 890 mmSW 580 mmSH 450 mm
SD 570 mm
Stacking 4Upholstered No
Athens ArmchairIAR-S-1
BH 750 mmSW 560 mmSH 470 mm
SD 540 mm
Stacking YesUpholstered No
Basket BLGER-S-1
BH 790 mmSW 590 mmSH 470 mm
SD 540 mm
Stacking AvailableUpholstered No
Closerie ArmchairRER-S-9
BH 880 mmSW 530 mmSH 450 mm
SD 530 mm
Stacking YesUpholstered No
CocoAEC-S-7
BH 810 mmSW 420 mmSH 470 mm
SD 510 mm
Stacking 10Upholstered No
Dalia ArmchairRER-S-1
BH 900 mmSW 590 mmSH 450 mm
SD 570 mm
Stacking YesUpholstered No
DarwinEMU-S-3
BH 770 mmSW 600 mmSH 450 mm
SD 550 mm
Stacking 8Upholstered No
FlintMIL-S-7
BH 740 mmSW 550 mmSH 460 mm
SD 500 mm
Stacking 4Upholstered Available
Iris BGER-S-3
BH 880 mmSW 550 mmSH 450 mm
SD 540 mm
Stacking 5Upholstered No
Lady S ArmchairRER-S-13
BH 785 mmSW 520 mmSH 460 mm
SD 575 mm
Stacking NoUpholstered No
Likewood Arm ChairZNG-S-2
BH 850 mmSW 560 mmSH 450 mm
SD 520 mm
Stacking YesUpholstered No
Link BGER-S-5
BH 860 mmSW 480 mmSH 450 mm
SD 570 mm
Stacking 4Upholstered No
Lutetia ArmchairRER-S-6
BH 780 mmSW 555 mmSH 460 mm
SD 510 mm
Stacking YesUpholstered No
LyzeEMU-S-6
BH 790 mmSW 620 mmSH 450 mm
SD 570 mm
Stacking 6Upholstered No
Mallorca ArmchairIAR-S-3
BH 840 mmSW 430 mmSH 490 mm
SD 500 mm
Stacking YesUpholstered No
MaréMIL-S-20
BH 730 mmSW 550 mmSH 450 mm
SD 560 mm
Stacking 4Upholstered Available
MinervaAEC-S-10
BH 810 mmSW 420 mmSH 470 mm
SD 510 mm
Stacking 10Upholstered No
MinushGER-S-8
BH 815 mmSW 590 mmSH 465 mm
SD 560 mm
Stacking 9Upholstered No
OUTDOOR armchairsAtlas Contract Furniture - Loose Furniture Catalogue Part B, Section 2
Page 106 Page 107
Moema 69GER-S-9
BH 790 mmSW 590 mmSH 470 mm
SD 540 mm
Stacking 4Upholstered No
NefEMU-S-8
BH 810 mmSW 630 mmSH 460 mm
SD 600 mm
Stacking NoUpholstered Yes
OpenGER-S-10
BH 860 mmSW 520 mmSH 450 mm
SD 520 mm
Stacking 4Upholstered No
Paname ArmchairRER-S-3
BH 780 mmSW 555 mmSH 460 mm
SD 510 mm
Stacking 4Upholstered No
RandaAET-S-16
BH 790 mmSW 570 mmSH 450 mm
SD 560 mm
Stacking NoUpholstered No
ReefEMU-S-9
BH 790 mmSW 600 mmSH 440 mm
SD 530 mm
Stacking 4Upholstered No
Serena ArmchairCAL-S-1
BH 810 mmSW 450 mmSH 450 mm
SD 590 mm
Stacking 8Upholstered No
Shadow ArmchairRER-S-14
BH 808 mmSW 570 mmSH 480 mm
SD 550 mm
Stacking 8Upholstered No
Skye Arm ChairZNG-S-5
BH 770 mmSW 640 mmSH 450 mm
SD 580 mm
Stacking YesUpholstered No
StripesMIL-S-28
BH 820 mmSW 480 mmSH 460 mm
SD 540 mm
Stacking 4Upholstered No
Sunset ArmchairRER-S-11
BH 780 mmSW 520 mmSH 450 mm
SD 540 mm
Stacking 8Upholstered No
Time Arm ChairZNG-S-7
BH 880 mmSW 540 mmSH 450 mm
SD 520 mm
Stacking NoUpholstered No
UniMIL-S-30
BH 790 mmSW 560 mmSH 460 mm
SD 530 mm
Stacking 4Upholstered Available
Uni-KaMIL-S-38
BH 800 mmSW 590 mmSH 460 mm
SD 540 mm
Stacking NoUpholstered Available
ZebraAET-S-6
BH 800 mmSW 540 mmSH 450 mm
SD 560 mm
Stacking 4Upholstered No
Page 108
Fluted Back Booth Seating With Accompanying Dining Tables - Orange Rooms, Southampton
Bespoke Booth Seating with Twin Pedestal Tables Bases - Domestic Kitchen Banquette, Essex
OUTDOOR high stoolsPart B - Section 3
OUTDOOR high stoolsAtlas Contract Furniture - Loose Furniture Catalogue Part B, Section 3
Page 110 Page 111
DarwinEMU-S-5
BH 1030 mmSW 500 mmSH 750 mm
SD 510 mm
Stacking 4Upholstered No
EchoMIL-S-6
BH 1130 mmSW 500 mmSH 760 mm
SD 560 mm
Stacking NoUpholstered No
FlintMIL-S-11
BH 770 mmSW 570 mmSH 770 mm
SD 560 mm
Stacking 4Upholstered Available
IbisMIL-S-14
BH 990 mmSW 550 mmSH 640 mm
SD 540 mm
Stacking NoUpholstered No
LinkGER-S-7
BH 960 mmSW 460 mmSH 760 mm
SD 420 mm
Stacking NoUpholstered No
Lutetia StoolRER-S-8
BH 990 mmSW 490 mmSH 750 mm
SD 550 mm
Stacking YesUpholstered No
Madrid StoolIAR-S-6
BH 780 mmSW 330 mmSH 780 mm
SD 330 mm
Stacking NoUpholstered No
Mallorca StoolIAR-S-4
BH 940 mmSW 440 mmSH 760 mm
SD 470 mm
Stacking YesUpholstered No
MinervaAEC-S-12
BH 1020 mmSW 440 mmSH 770 mm
SD 510 mm
Stacking NoUpholstered No
NassauMIL-S-3
BH 930 mmSW 460 mmSH 760 mm
SD 560 mm
Stacking 5Upholstered No
Paname StoolRER-S-5
BH 990 mmSW 490 mmSH 740 mm
SD 550 mm
Stacking 4Upholstered No
RandaAET-S-18
BH 965 mmSW 540 mmSH 770 mm
SD 470 mm
Stacking NoUpholstered No
Sunset StoolRER-S-12
BH 950 mmSW 500 mmSH 780 mm
SD 482 mm
Stacking 4Upholstered No
Time Bar StoolZNG-S-9
BH 750 mmSW 350 mmSH 750 mm
SD 530 mm
Stacking YesUpholstered No
UniMIL-S-37
BH 1080 mmSW 510 mmSH 750 mm
SD 520 mm
Stacking NoUpholstered Available
ZebraAET-S-7
BH 980 mmSW 490 mmSH 750 mm
SD 530 mm
Stacking 4Upholstered No
Page 112
Madrid Counter Stool - See Page 114
OUTDOOR miscellaneous
Part B - Section 4
OUTDOOR miscellaneousAtlas Contract Furniture - Loose Furniture Catalogue
Page 114
Lagarto Mini StoolIAR-S-8
BH 500 mmSW 370 mmSH 500 mm
SD 370 mm
Stacking NoUpholstered Yes
Lagarto PoltronaIAR-S-7
BH 760 mmSW 700 mmSH 390 mm
SD 630 mmAH 760 mm
Stacking YesUpholstered Yes
Lagarto PuffIAR-S-12
BH 340 mmSW 710 mmSH 340 mm
SD 540 mm
Stacking YesUpholstered Yes
Lagarto SofaIAR-S-10
BH 680 mmSW 1300 mmSH 360 mm
SD 720 mm
Stacking YesUpholstered Yes
Lagarto StoolIAR-S-9
BH 780 mmSW 420 mmSH 780 mm
SD 420 mm
Stacking NoUpholstered Yes
Lagarto Straight SofaIAR-S-11
BH 680 mmSW 800 mmSH 360 mm
SD 720 mm
Stacking YesUpholstered Yes
Madrid Counter StoolIAR-S-5
BH 460 mmSW 330 mmSH 460 mm
SD 330 mm
Stacking NoUpholstered No
RandaAET-S-17
BH 730 mmSW 720 mmSH 420 mm
SD 640 mm
Stacking 3Upholstered No
Wharf LowstoolWCT-S-17
BH 450 mmSW 500 mmSH 450 mm
SD 350 mm
Stacking NoUpholstered No
OUTDOOR coffee heightPart B - Section 5 - Tables and Bases
OUTDOOR coffee height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue
Page 116
Capri Mini TableIAR-T-3
BH 500 mmBW N/A mm
Base Type 4 Leg
BD N/A mm
Max. S 900 mmMax. D 900 mm
Finishes Available Yes
Flip Top No
SitgesIAR-T-1
BH 500 mmBW 400 mm
Base Type 3 Leg
BD 400 mm
Max. S N/A mmMax. D 600 mm
Finishes Available Yes
Flip Top No
Lutetia Side Chair - See Page 99
OUTDOOR dining heightPart B - Section 6 - Tables and Bases
OUTDOOR dining height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue Part B, Section 6
Page 118 Page 119
Aluminium - FliptopGAL-T-1
BH 700 mmBW 660 mm
Base Type 4 Leg
BD 660 mm
Max. S 700 mmMax. D 800 mm
Finishes Available Yes
Flip Top Yes
AvangardAEC-T-4
BH 730 mmBW 700 mm
Base Type 4 Leg
BD 700 mm
Max. S 800 mmMax. D 900 mm
Finishes Available Yes
Flip Top Yes
Bapia-LibVTI-T-18
BH 730 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 900 mmMax. D TBC mm
Finishes Available Yes
Flip Top No
ContinentalTLO-T-4
BH 710 mmBW 440 mm
Base Type 4 Leg
BD 440 mm
Max. S 800 mmMax. D 800 mm
Finishes Available No
Flip Top No
ContinentalTLO-T-5
BH 710 mmBW 900 mm
Base Type Twin Pedestal
BD 600 mm
Max. S 700 x 1200 mmMax. D N/A mm
Finishes Available No
Flip Top No
ContinentalTLO-T-6
BH 710 mmBW 600 mm
Base Type 4 Leg
BD 600 mm
Max. S 900 mmMax. D 1000 mm
Finishes Available No
Flip Top No
ContinentalTLO-T-3
BH 710 mmBW 530 mm
Base Type 3 Leg
BD 530 mm
Max. S 700 mmMax. D 700 mm
Finishes Available No
Flip Top No
Eiffel-4VTI-T-12
BH 720 mmBW 516 mm
Base Type 4 Leg
BD 516 mm
Max. S 900 mmMax. D 900 mm
Finishes Available Yes
Flip Top Yes
Fresh Alu-StainlessGAL-T-2
BH 700 mmBW 460 mm
Base Type 4 Leg
BD 460 mm
Max. S 700 mmMax. D 800 mm
Finishes Available No
Flip Top No
Fresh Alu-StainlessGAL-T-3
BH 700 mmBW 650 mm
Base Type Twin Pedestal
BD 460 mm
Max. S 1200 x 700 mmMax. D N/A mm
Finishes Available No
Flip Top No
KeplerVTI-T-8
BH 720 mmBW 400 mm
Base Type Round
BD 400 mm
Max. S TBC mmMax. D 550 mm
Finishes Available Yes
Flip Top No
Lagarto TableIAR-T-2
BH 740 mmBW N/A mm
Base Type Round
BD N/A mm
Max. S N/A mmMax. D 1100 mm
Finishes Available Yes
Flip Top No
MilanoTLO-T-1
BH 730 mmBW 620 mm
Base Type 4 Leg
BD 620 mm
Max. S 800 mmMax. D 1000 mm
Finishes Available No
Flip Top Yes
Newport Table Base - 3 LegGDE-T-1
BH 715 mmBW 480 mm
Base Type 3 Leg
BD 480 mm
Max. S 700 mmMax. D 700 mm
Finishes Available No
Flip Top No
Newport Table Base - 4 LegGDE-T-2
BH 715 mmBW 480 mm
Base Type 4 Leg
BD 480 mm
Max. S 700 mmMax. D 700 mm
Finishes Available No
Flip Top No
Newport Twin Pedestal Table BaseGDE-T-3
BH 710 mmBW 950 mm
Base Type Twin Pedestal
BD 480 mm
Max. S 1200 x 800 mmMax. D N/A mm
Finishes Available No
Flip Top No
Portland Flip Top Table BaseGDE-T-4
BH 730 mmBW 500 mm
Base Type 4 Leg
BD 485 mm
Max. S 750 mmMax. D 900 mm
Finishes Available No
Flip Top Yes
RacesVTI-T-13
BH 720 mmBW 480 mm
Base Type 4 Leg
BD 480 mm
Max. S 900 mmMax. D 900 mm
Finishes Available Yes
Flip Top No
OUTDOOR dining height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue
Page 120
Races-LibVTI-T-15
BH 720 mmBW 480 mm
Base Type 4 Leg
BD 480 mm
Max. S 900 mmMax. D 900 mm
Finishes Available Yes
Flip Top No
Riviera Table 4RER-T-1
BH 710 mmBW 460 mm
Base Type 4 Leg
BD 460 mm
Max. S 800 mmMax. D 800 mm
Finishes Available Yes
Flip Top Yes
Wharf Rectangular TableWCT-T-12
BH 740 mmBW 1400 mm
Base Type 4 Leg
BD 800 mm
Max. S 1400 x 800 mmMax. D N/A mm
Finishes Available No
Flip Top No
Wharf Square TableWCT-T-11
BH 740 mmBW 800 mm
Base Type 4 Leg
BD 800 mm
Max. S 800 mmMax. D N/A mm
Finishes Available No
Flip Top No
ZeppelinVTI-T-10
BH 730 mmBW 580 mm
Base Type 4 Leg
BD 580 mm
Max. S 900 mmMax. D 900 mm
Finishes Available Yes
Flip Top No
OUTDOOR poseur heightPart B - Section 7 - Tables and Bases
Page 123
OUTDOOR poseur height tables and basesAtlas Contract Furniture - Loose Furniture Catalogue
Page 122
Avangard AltaAEC-T-5
BH 1115 mmBW 700 mm
Base Type 4 Leg
BD 700 mm
Max. S 700 mmMax. D 700 mm
Finishes Available Yes
Flip Top Yes
Bapia-LibVTI-T-19
BH 1100 mmBW 500 mm
Base Type Square
BD 500 mm
Max. S 600 mmMax. D TBC mm
Finishes Available Yes
Flip Top No
Fresh Alu-StainlessGAL-T-4
BH 1100 mmBW 460 mm
Base Type 4 Leg
BD 460 mm
Max. S 600 mmMax. D 600 mm
Finishes Available No
Flip Top No
KeplerVTI-T-9
BH 1100 mmBW 400 mm
Base Type Round
BD 400 mm
Max. S TBC mmMax. D 550 mm
Finishes Available Yes
Flip Top No
MilanoTLO-T-2
BH 1050 mmBW 620 mm
Base Type 4 Leg
BD 620 mm
Max. S 800 mmMax. D 1000 mm
Finishes Available No
Flip Top Yes
Portland Flip Top Table BaseGDE-T-5
BH 1100 mmBW 500 mm
Base Type 4 Leg
BD 485 mm
Max. S 700 mmMax. D 800 mm
Finishes Available No
Flip Top Yes
RacesVTI-T-14
BH 1100 mmBW 480 mm
Base Type 4 Leg
BD 480 mm
Max. S 700 mmMax. D 700 mm
Finishes Available Yes
Flip Top No
Races-LibVTI-T-16
BH 1100 mmBW 480 mm
Base Type 4 Leg
BD 480 mm
Max. S 700 mmMax. D 700 mm
Finishes Available Yes
Flip Top No
ZeppelinVTI-T-11
BH 1100 mmBW 580 mm
Base Type 4 Leg
BD 580 mm
Max. S 600 mmMax. D 600 mm
Finishes Available Yes
Flip Top No
OUTDOOR stock table topsPart B - Section 8
OUTDOOR stock table topsAtlas Contract Furniture - Loose Furniture Catalogue Part B, Section 8
Page 124 Page 125
001 WhiteTLO-TT-68
Shape RoundCM Wood Composite
900 mm
600 mm
800 mm700 mm
Thickness 26 mm
1000 mm
001 WhiteTLO-TT-69
Shape SquareCM Wood Composite600 mm
800 mm700 mm
Thickness 26 mm
001 WhiteTLO-TT-70
Shape RectangularCM Wood Composite1100 x 700 mm
1200 x 800 mm
Thickness 26 mm
019 BeechTLO-TT-47
Shape RoundCM Wood Composite
900 mm
600 mm
800 mm700 mm
Thickness 26 mm
1000 mm
019 BeechTLO-TT-48
Shape SquareCM Wood Composite600 mm
800 mm700 mm
Thickness 26 mm
019 BeechTLO-TT-49
Shape RectangularCM Wood Composite1100 x 700 mm
1200 x 800 mm
Thickness 26 mm
021 StratosTLO-TT-65
Shape RoundCM Wood Composite600 mm
800 mm700 mm
Thickness 26 mm
021 StratosTLO-TT-66
Shape SquareCM Wood Composite600 mm
800 mm700 mm
Thickness 26 mm
021 StratosTLO-T-67
Shape RectangularCM Wood Composite1100 x 700 mm
1200 x 800 mm
Thickness 26 mm
055 BlackTLO-TT-50
Shape RoundCM Wood Composite
900 mm
600 mm
800 mm700 mm
Thickness 26 mm
1000 mm
055 BlackTLO-TT-51
Shape SquareCM Wood Composite600 mm
800 mm700 mm
Thickness 26 mm
055 BlackTLO-TT-52
Shape RectangularCM Wood Composite1100 x 700 mm
1200 x 800 mm
Thickness 26 mm
122 Ex-WorksTLO-TT-59
Shape RoundCM Wood Composite600 mm
800 mm700 mm
Thickness 26 mm
122 Ex-WorksTLO-TT-60
Shape SquareCM Wood Composite600 mm
800 mm700 mm
Thickness 26 mm
122 Ex-WorksTLO-TT-61
Shape RectangularCM Wood Composite1100 x 700 mmThickness 26 mm
179 Ponderosa GreyTLO-TT-62
Shape RoundCM Wood Composite600 mm
800 mm700 mm
Thickness 26 mm
179 Ponderosa GreyTLO-TT-63
Shape SquareCM Wood Composite600 mm
800 mm700 mm
Thickness 26 mm
179 Ponderosa GreyTLO-TT-64
Shape RectangularCM Wood Composite1100 x 700 mmThickness 26 mm
Page 127
OUTDOOR stock table topsAtlas Contract Furniture - Loose Furniture Catalogue
Page 126
328 Dark RedTLO-TT-56
Shape RoundCM Wood Composite600 mm
700 mm
Thickness 26 mm
328 Dark RedTLO-TT-57
Shape SquareCM Wood Composite600 mm
800 mm700 mm
Thickness 26 mm
328 Dark RedTLO-TT-58
Shape RectangularCM Wood Composite1100 x 700 mmThickness 26 mm
420 Dark GreyTLO-TT-53
Shape RoundCM Wood Composite600 mm
800 mm700 mm
Thickness 26 mm
420 Dark GreyTLO-TT-54
Shape SquareCM Wood Composite600 mm
800 mm700 mm
Thickness 26 mm
420 Dark GreyTLO-TT-55
Shape RectangularCM Wood Composite1100 x 700 mmThickness 26 mm
BESPOKE banquette seatingKey Reads - Section 3
Page 128 Page 129
Atlas Bespoke Banquette SeatingAtlas Contract Furniture is one of the UK’s most experienced manufacturers of contract furniture and banquette seating. We take pride in providing an unmatched level of service, and have a history of satisfied clients across the UK and beyond.
THE BESPOKE SEATING MANUFACTURERSDesign Solutions to All Tastes and Requirements.
Standing Apart from the CompetitionSome of the services we are able to offer:• A made to measure bespoke service• In house design and manufacture• Renowned quality seating using sprung
technology• Free advice & planning• Fully customised design service• 10 year frame guarantee on our Standard
Sprung construction• International delivery
Solutions Tailored to Your ProjectsWe work closely with every one of our clients to ensure their product specification is met. We can tackle all types of venue - including the likes of restaurants, bars and hotels, clubs, offices and even high end residential projects. Every aspect of our banquette bench seating can be fully customised to suit your requirements. Our mission is to create outstanding seating solutions that reflect each client’s individual needs and personal style.
Our TeamWith hundreds of years of combined knowledge and experience in the contract furniture industry - Atlas have learnt how best to make comfortable, durable and great looking seating to the exacting requirements of our discerning clients.
Our ProductsWe offer a stunning range of design ideas to suit both traditional and contemporary venues. We can also develop your own design vision.
With a range of frame construction methods available, every style is fully customisable to fit your unique specification.
Quality GuaranteeWe always use best quality constructional materials and manufacturing methods, and have access to a huge range of contract fabrics, faux leathers and real hides.
Contact UsWe offer a no-commitment layout advice and a free quotation service. Contact us today to discuss your next project with a member of our team.
Key Reads - Section 3
Page 130 Page 131
Our ‘Standard Sprung’ construction which has been tested to BS EN 15373 for severe contract use comes with a 10 year frame guarantee. With a rigid frame construction and use of serpentine type springs, it can be finished with a number of seat types, variations, additions and ergonomic styles to suit.
Atlas Standard Sprung Seating Construction
Our more luxurious ‘Helical Sprung’ construction with the addition of a sprung back to provide extra comfort. The helical springs in the base offer a natural fit that contours and supports the body.
Atlas Helical Sprung Seating Construction
Our latest design, ‘Pocket Sprung’ construction. The base is assembled using a pocketed spring construction — similar to those found inside some mattresses. This further improves the comfort factor, whilst offering good ergonomic support.
Atlas Pocket Sprung Seating Construction
This frame construction utilises a rigid base in place of any springs or webbing. The platform base is covered in foam to suit, and then upholstered. Platform base units can often run at a more economical price, though some comfort will be compromised.
Atlas Platform Base Seating Construction Atlas Webbed Cushion Seating Construction
These units are typically composed of our rigid frames with a strong elasticated webbing that forms a lattice-like weave where the springs would usually sit. Foam or feather-filled cushion are then placed on top of the webbing for the user to sit on.
THE BESPOKE SEATING MANUFACTURERSQuality Construction Methods Developed from Years of Experience.
OUR MOST POPULAR AND RECOMMENDED
WE ALSO OFFER WHERE REQUIRED
SALES terms and conditions
Terms of Use - Appendix 1
Page 132 Page 133
TERMS AND CONDITIONS OF SALE 1. INTERPRETATION 1.1 Definitions. In these Conditions, the following definitions apply:
Business Day: a day other than a Saturday, Sunday or public holiday in England when banks in London are open for business.
Commencement Date:
has the meaning set out in clause 2.2.
Company: Atlas Contract Furniture Limited registered in England and Wales with company number 06995494.
Company Materials: has the meaning set out in clause 9.1(j). Conditions: these terms and conditions as amended from time
to time in accordance with clause 16.7. Contract: the contract between the Company and the
Customer for the supply of Goods and/or Services in accordance with these Conditions.
Customer: the person or firm who purchases the Goods and/or Services from the Company.
Factory 14a Airfield Road, Christchurch, Dorset, BH23 3TG or such named premises of the Company as may be notified by the Company to the Customer
Force Majeure Event:
has the meaning given to it in clause 15.
Goods: the goods (or any part of them) set out in the Order. Goods Specification:
any specification for the Goods, including any relevant plans or drawings, that is agreed in writing by the Customer and the Company.
Intellectual Property Rights:
patents, rights to inventions, copyright and related rights, trade marks, business names and domain names, rights in get-up, goodwill and the right to sue for passing off, rights in designs, database rights, rights to use, and protect the confidentiality of, confidential information (including know-how), and all other intellectual property rights, in each case whether registered or unregistered and including all applications and rights to apply for and be granted, renewals or extensions of, and rights to claim priority from, such rights and all similar or equivalent rights or forms of protection which subsist or will subsist now or in the future in any
part of the world. Nominated Subcontractor
any subcontractor which has carried out any of the Services under the Contract at the specific request of the Customer.
Order: the Customer's order for the supply of Goods and/or Services, as set out in the Customer's written acceptance of the Company's quotation.
Services: the services, supplied by the Supplier to the Customer as set out in the Service Specification below.
Service Specification: the description or specification for the Services provided in writing by the Supplier to the Customer.
Site: the property at which the Goods will be installed. Site Measurement the Company’s visit to the Site to take
measurements by reference to which the Goods shall be made to.
Website: www.atlascontractfurniture.com. 1.2 In these Conditions, the following rules apply: (a) a person includes a natural person, corporate or unincorporated body
(whether or not having separate legal personality); (b) a reference to a party includes its personal representatives, successors or
permitted assigns; (c) a reference to a statute or statutory provision is a reference to such
statute or statutory provision as amended or re-enacted. A reference to a statute or statutory provision includes any subordinate legislation made under that statute or statutory provision, as amended or re-enacted;
(d) any phrase introduced by the terms including, include, in particular or any
similar expression shall be construed as illustrative and shall not limit the sense of the words preceding those terms; and
(e) a reference to writing or written includes faxes and e-mails. 2. BASIS OF CONTRACT 2.1 The Order constitutes an offer by the Customer to purchase Goods and/or
Services in accordance with these Conditions. 2.2 The Order shall only be deemed to be accepted when the Company issues
written acceptance of the Order at which point and on which date the Contract shall come into existence (Commencement Date).
2.3 The Contract constitutes the entire agreement between the parties. The
Customer acknowledges that it has not relied on any statement, promise,
representation, assurance or warranty made or given by or on behalf of the Company which is not set out in the Contract.
2.4 Any samples, drawings, descriptive matter or advertising issued by the
Company and any descriptions of the Goods or illustrations or descriptions of the Services contained in the Company's catalogues, brochures or on the Website are issued or published for the sole purpose of giving an approximate idea of the Services and/or Goods described in them. They shall not form part of the Contract or have any contractual force.
2.5 These Conditions apply to the Contract to the exclusion of any other terms
that the Customer seeks to impose or incorporate, or which are implied by trade, custom, practice or course of dealing.
2.6 Any quotation given by the Company shall not constitute an offer, and is
only valid for a period of 20 Business Days from its date of issue. 2.7 All of these Conditions shall apply to the supply of both Goods and Services
except where application to one or the other is specified. 3. GOODS 3.1 The Goods are described in the Company's catalogue as modified by any
applicable Goods Specification. 3.2 To the extent that the Goods are to be manufactured in accordance with a
Goods Specification supplied by the Customer, the Customer shall indemnify the Company against all liabilities, costs, expenses, damages and losses (including any direct, indirect or consequential losses, loss of profit, loss of reputation and all interest, penalties and legal and other reasonable professional costs and expenses) suffered or incurred by the Company in connection with any claim made against the Company for actual or alleged infringement of a third party's intellectual property rights arising out of or in connection with the Company's use of the Goods Specification. This clause 3.2 shall survive termination of the Contract.
3.3 The Company reserves the right to amend the Goods Specification if
required by any applicable statutory or regulatory requirements. 4. DELIVERY OF GOODS 4.1 The Company shall ensure that: (a) each delivery of the Goods is accompanied by a delivery note which shows
the date of the Order, all relevant Customer and Company reference numbers, the type and quantity of the Goods (including the code number of the Goods, where applicable), special storage instructions (if any) and, if
the Order is being delivered by instalments, the outstanding balance of Goods remaining to be delivered; and
(b) if the Company requires the Customer to return any packaging material to the Company, that fact is clearly stated on the delivery note. The Customer shall make any such packaging materials available for collection at such times as the Company shall reasonably request. Returns of packaging materials shall be at the Company's expense.
4.2 The Customer will specify in the Order whether it requires:
(a) the Goods to be delivered to Site (Site Deliveries); or
(b) the Goods to be made available for collection from the Factory (or such other location as may be advised by the Company prior to collection) (Collections).
4.3 In the case of Site Deliveries, the Company may deliver the Goods at any
time after the Company notifies the Customer that the Goods are ready, and delivery of the Goods shall be completed on the completion of unloading of the Goods from the Company’s delivery vehicle at the Site.
4.4 In the case of Collections, the Customer shall collect the Goods within five Business Days of the Company notifying the Customer that the Goods are ready, and the delivery of the Goods shall be completed on the loading of the Goods onto the Customer’s (or an agent of the Customer’s) delivery vehicle at the Factory (or such other location as may be advised by the Company prior to collection).
4.5 Any dates quoted for delivery of the Goods are approximate only, and the
time of delivery is not of the essence. The Company shall not be liable for any failure or delay in delivery of the Goods that is caused by:
(a) a Force Majeure Event;
(b) any unforeseen event which is not the fault of the Company;
(c) the Customer's failure to provide the Company with adequate delivery instructions or any other instructions that are relevant to the supply of the Goods; or
(d) a change in the Customer’s instructions.
4.6 If the Customer fails to accept or take delivery of the Goods within 10
Business Days of the Company notifying the Customer that the Goods are ready, then except where such failure or delay is caused by a Force Majeure Event or by the Company's failure to comply with its obligations under the Contract in respect of the Goods:
(a) delivery of the Goods shall be deemed to have been completed at 9.00 am on the eleventh Business Day following the day on which the Company notified the Customer that the Goods were ready; and
(b) the Company may store the Goods until delivery takes place, and charge
the Customer for all related costs and expenses (including insurance). 4.7 The Company may deliver the Goods by instalments, which may be
invoiced and paid for separately. Each instalment shall constitute a separate contract. Any delay in delivery or defect in an instalment shall not entitle the Customer to cancel any other instalment.
5. ACCEPTANCE 5.1 Immediately following delivery, the Customer will inspect the Goods and
may reject any that do not comply with clause 6.1, provided that the notice of rejection is given to the Company as soon as reasonably practicable after the Goods are inspected and in any event within 2 Business Days of delivery.
5.2 If the Customer fails to give notice of rejection in accordance with clause 5.1, it shall be deemed to have accepted the Goods.
6. QUALITY OF GOODS 6.1 The Company warrants that on delivery, the Goods shall: (a) subject to clause 6.2 and 6.4, conform in all material respects with their
description and any applicable Goods Specification; (b) be free from material defects in design, material and workmanship; (c) be of satisfactory quality (within the meaning of the Sale of Goods Act
1979); and (d) be fit for any intended purpose made known by the Customer to the
Company. 6.2 The Customer acknowledges that during the manufacturing process
colour, dye lot and stain variations often occur and that the Company does not guarantee the Goods will be exactly the same shade as any samples provided to the Customer prior to production. The Customer shall have the opportunity to visit the Factory during production, on providing reasonable notice to the Company, to inspect any variation for themselves.
6.3 The Company further warrants that for a period of 10 years from the date of delivery (warranty period), any banquet seating frames supplied within
the Goods shall: (a) be free from material defects in design, material and workmanship; (b) be of satisfactory quality (within the meaning of the Sale of Goods Act
1979); and (c) be fit for any purpose held out by the Company. 6.4 In the case of materials or products supplied by the Company but which
have not been manufactured by the Company, the Company will only grant (where possible) to the Customer the benefit of any warranty whether express statutory or otherwise that it has received from its supplier.
6.5 Subject to clause 6.6, if: (a) the Customer gives notice in writing (during the applicable warranty period)
that some or all of the Goods do not comply with the warranties set out in clause 6.1, 6.3 and 6.4; and
(b) the Company is given a reasonable opportunity of examining such Goods;
and (c) the Customer (if asked to do so by the Company) returns such Goods to
the Company's place of business at the Customer's cost, the Company shall, at its option, repair or replace the defective Goods, or
refund the price of the defective Goods in full. 6.6 The Company shall not be liable for the Goods' failure to comply with the
warranties in clauses 6.1, 6.3 and 6.4 if: (a) the Customer makes any further use of such Goods after giving a notice in
accordance with clause 6.5; or (b) the defect arises because the Customer failed to follow the Company's oral
or written instructions as to the storage, installation, commissioning, use or maintenance of the Goods or good trade practice; or
(c) the defect arises as a result of the Company following any drawing, design
or Goods Specification supplied by the Customer; or (d) the Customer alters or repairs such Goods without the written consent of
the Company; or (e) the defect arises as a result of fair wear and tear, wilful damage,
negligence, or abnormal operating conditions; or (f) the Goods differ from the Goods Specification as a result of changes made
to ensure they comply with applicable statutory or regulatory standards. 6.7 Except as provided in this clause 6, the Company shall have no liability to
the Customer in respect of the Goods' failure to comply with the warranties set out in clauses 6.1, 6.3 or 6.4.
6.8 The terms of these Conditions shall apply to any repaired or replacement
Goods supplied by the Company under clause 6.5. 7. TITLE AND RISK 7.1 The risk in the Goods shall pass to the Customer on delivery. 7.2 Title to the Goods shall not pass to the Customer until: (a) the Company receives payment in full (in cash or cleared funds) for the
Goods and any other goods that the Company has supplied to the Customer in respect of which payment has become due, in which case title to the Goods shall pass at the time of payment of all such sums.
7.3 Until title to the Goods has passed to the Customer, the Customer shall: (a) store the Goods separately from all other goods held by the Customer so
that they remain readily identifiable as the Company's property; (b) not remove, deface or obscure any identifying mark or packaging on or
relating to the Goods; (c) maintain the Goods in satisfactory condition and keep them insured
against all risks for their full price on the Company's behalf from the date of delivery;
(d) notify the Company immediately if it becomes subject to any of the events
listed in clause 14.1(b) to clause 14.1(m); and (e) give the Company such information relating to the Goods as the Company
may require from time to time. 7.4 Subject to clause 7.5, the Customer may use the Goods in the ordinary
course of its business (but not otherwise) before the Company receives payment for the Goods.
7.5 If before title to the Goods passes to the Customer the Customer becomes subject to any of the events listed in clause 14.1(b) to clause 14.1(m),
then, without limiting any other right or remedy the Company may have, the Company may at any time require the Customer to deliver up all Goods in its possession which have not been irrevocably incorporated into another product; and if the Customer fails to do so promptly, enter any premises of the Customer or of any third party where the Goods are stored in order to recover them.
8. SUPPLY OF SERVICES 8.1 The Company shall provide the Services to the Customer in accordance
with the Service Specification in all material respects. 8.2 The Company shall use all reasonable endeavours to meet any
performance dates for the Services specified in the Order, but any such dates shall be estimates only and time shall not be of the essence for the performance of the Services.
8.3 The Company shall have the right to make any changes to the Services
which are necessary to comply with any applicable law or safety requirement, or which do not materially affect the nature or quality of the Services, and the Company shall notify the Customer in any such event.
The Company warrants to the Customer that the Services will be provided using reasonable care and skill.
9. CUSTOMER'S OBLIGATIONS 9.1 The Customer shall: (a) ensure that the terms of the Order and (if submitted by the Customer) the
Goods Specification are complete and accurate; (b) ensure a representative with the required authority is available to inspect
the Goods immediately upon delivery and that such representative is instructed either to accept the Goods or issue a notice of rejection;
(c) co-operate with the Company in all matters relating to the Services; (d) provide the Company, its employees, agents, consultants and
subcontractors, with unrestricted access to the Site as reasonably required by the Company to carry out the Site Measurement and install the Goods;
(e) provide the Company with such information and materials as the Company
may reasonably require to supply the Services and manufacture the Goods, and ensure that such information is accurate in all material respects;
(f) provide the Company, its employees, agents, consultants and
Page 134 Page 135
10.2 In the Company’s quotation the Company may require a percentage of the
price for the Goods and/or Services to be paid as a non-refundable deposit .
10.3 If the Company requires a deposit to be paid, the Customer shall pay the non-refundable deposit in full and cleared funds within the time stated on the Company’s written acceptance of the Order.
10.4 The Company reserves the right to increase the price of the Goods and/or Service and Other Costs by giving notice to the Customer at any time, to reflect any increase in the cost of the Goods and/or Services and Other Costs to the Company that is due to:
(a) any factor beyond the control of the Company (including foreign exchange
fluctuations, increases in taxes and duties, and increases in labour, materials and other manufacturing costs);
(b) any request by the Customer to change the delivery date(s), quantities or
types of Goods ordered, or the Goods Specification;
(c) any postponed, failed or delayed Site Measurement or Site Deliveries or
(d) any delay caused by any instructions of the Customer in respect of the Goods or failure of the Customer to give the Company adequate, timely or accurate information or instructions in respect of the Goods.
10.5 In respect of Goods and/or Services and Other Costs, subject to clauses
10.2 and 10.3. The Company shall invoice the Customer on or at any time after delivery.
10.6 The Customer shall pay each invoice submitted by the Company: (a) within the agreed period as set out in the Company’s written acceptance of
the Order; and (b) in full and in cleared funds to a bank account nominated in writing by the
Company, and time for payment shall be of the essence of the Contract. 10.7 All amounts payable by the Customer under the Contract (including any
deposit) are non-refundable and exclusive of amounts in respect of value added tax chargeable from time to time (VAT). Where any taxable supply for VAT purposes is made under the Contract by the Company to the Customer, the Customer shall, on receipt of a valid VAT invoice from the
Company, pay to the Company such additional amounts in respect of VAT as are chargeable on the supply of the Services or Goods at the same time as payment is due for the supply of the Services or Goods.
10.8 If the Customer fails to make any payment due to the Company under the
Contract by the due date for payment, then the Customer shall pay interest on the overdue amount at the current rate under the Late Payment of Commercial of Commercial Debts (Interest) Act 1999. Such interest shall accrue on a daily basis from the due date until actual payment of the overdue amount, whether before or after judgment. The Customer shall pay the interest together with the overdue amount.
10.9 The Customer shall pay all amounts due under the Contract in full without
any set-off, counterclaim, deduction or withholding except as required by law. The Company may, without limiting its other rights or remedies, set off any amount owing to it by the Customer against any amount payable by the Company to the Customer.
11. INTELLECTUAL PROPERTY RIGHTS 11.1 All Intellectual Property Rights in or arising out of or in connection with the
manufacture of the Goods and/or supply of the Services shall be owned by the Company.
11.2 The Customer acknowledges that, in respect of any third party Intellectual
Property Rights in the Services, the Customer's use of any such Intellectual Property Rights is conditional on the Company obtaining a written licence from the relevant licensor on such terms as will entitle the Company to license such rights to the Customer.
11.3 All Company Materials are the exclusive property of the Company. 12. CONFIDENTIALITY A party (receiving party) shall keep in strict confidence all technical or
commercial know-how, specifications, inventions, processes or initiatives which are of a confidential nature and have been disclosed to the receiving party by the other party (disclosing party), its employees, agents or subcontractors, and any other confidential information concerning the disclosing party's business, its products and services which the receiving party may obtain. The receiving party shall only disclose such confidential information to those of its employees, agents and subcontractors who need to know it for the purpose of discharging the receiving party's obligations under the Contract, and shall ensure that such employees, agents and subcontractors comply with the obligations set out in this clause as though they were a party to the Contract. The receiving party may also disclose such of the disclosing party's confidential information as is required to be disclosed by law, any governmental or regulatory authority
or by a court of competent jurisdiction. This clause 12 shall survive termination of the Contract.
13. LIMITATION OF LIABILITY: THE CUSTOMER'S ATTENTION IS PARTICULARLY
DRAWN TO THIS CLAUSE 13.1 Nothing in these Conditions shall limit or exclude the Company's liability
for: (a) death or personal injury caused by its negligence, or the negligence of its
employees, agents or subcontractors; (b) fraud or fraudulent misrepresentation; (c) breach of the terms implied by section 2 of the Supply of Goods and
Services Act 1982 (title and quiet possession); (d) breach of the terms implied by section 12 of the Sale of Goods Act 1979
(title and quiet possession); or (e) defective products under the Consumer Protection Act 1987 (if
applicable). 13.2 Subject to clause 13.1: (a) the Company shall under no circumstances whatever be liable to the
Customer, whether in contract, tort (including negligence), breach of regulatory or statutory duty, or otherwise, for any loss of profit, or any indirect or consequential loss arising under or in connection with the Contract;
(b) the Company shall under no circumstances whatever be liable to the Customer for any act or omission of a Nominated Subcontractor; and
(c) the Company's total liability to the Customer in respect of all other losses
arising under or in connection with the Contract, whether in contract, tort (including negligence), breach of statutory duty, or otherwise, shall in no circumstances exceed an amount equal to the total price of the Good and/or Services which are the subject of the relevant Order.
13.3 The terms implied by sections 13 to 15 of the Sale of Goods Act 1979 and
the terms implied by sections 3 to 5 of the Supply of Goods and Services Act 1982 are, to the fullest extent permitted by law, excluded from the Contract.
13.4 This clause 13 shall survive termination of the Contract.
subcontractors with adequate heating, power and lighting as the Company may reasonably require to install the Goods;
(g) prepare the Site for the installation of the Goods; (h) obtain and maintain all necessary licences, permissions and consents
which may be required for the Services before the date on which the Services are to start;
(i) comply with any relevant health and safety legislation; and (j) keep and maintain all materials, equipment, documents and other
property of the Company reasonably require by the Company for the provision of the Services (Company Materials) at the Customer's premises in safe custody at its own risk, maintain the Company Materials in good condition until returned to the Company, and not dispose of or use the Company Materials other than in accordance with the Company's written instructions or authorisation.
9.2 If the Company's performance of any of its obligations in respect of the
Contract is prevented or delayed by any act or omission by the Customer or failure by the Customer to perform any relevant obligation (Customer Default):
(a) the Company shall without limiting its other rights or remedies have the
right to suspend performance of the Contract until the Customer remedies the Customer Default, and to rely on the Customer Default to relieve it from the performance of any of its obligations to the extent the Customer Default prevents or delays the Company's performance of any of its obligations;
(b) the Company shall not be liable for any costs or losses sustained or
incurred by the Customer arising directly or indirectly from the Company's failure or delay to perform any of its obligations as set out in this clause 9.2; and
(c) the Customer shall reimburse the Company on written demand for any
costs or losses sustained or incurred by the Company arising directly or indirectly from the Customer Default.
10. CHARGES AND PAYMENT 10.1 The price for the Goods and/or Services shall be the price set out in the
Order. The price of the Goods and/or Services is exclusive of all costs and charges of packaging, insurance, transport (and where stated on the Order) installation of the Goods (Other Costs), which shall be paid by the Customer when it pays for the Goods and/or Services.
14. TERMINATION 14.1 Without limiting its other rights or remedies, each party may terminate the
Contract with immediate effect by giving written notice to the other party if: (a) the other party commits a material breach of its obligations under this
Contract and (if such breach is remediable) fails to remedy that breach within 14 days after receipt of notice in writing to do so;
(b) the other party suspends, or threatens to suspend, payment of its debts or
is unable to pay its debts as they fall due or admits inability to pay its debts or (being a company or limited liability partnership) is deemed unable to pay its debts within the meaning of section 123 of the Insolvency Act 1986 or (being an individual) is deemed either unable to pay its debts or as having no reasonable prospect of so doing, in either case, within the meaning of section 268 of the Insolvency Act 1986 or (being a partnership) has any partner to whom any of the foregoing apply;
(c) the other party commences negotiations with all or any class of its
creditors with a view to rescheduling any of its debts, or makes a proposal for or enters into any compromise or arrangement with its creditors other than (where a company) for the sole purpose of a scheme for a solvent amalgamation of that other party with one or more other companies or the solvent reconstruction of that other party;
(d) a petition is filed, a notice is given, a resolution is passed, or an order is
made, for or in connection with the winding up of the other party (being a company) other than for the sole purpose of a scheme for a solvent amalgamation of the other party with one or more other companies or the solvent reconstruction of that other party;
(e) the other party (being an individual) is the subject of a bankruptcy petition
or order; (f) a creditor or encumbrancer of the other party attaches or takes possession
of, or a distress, execution, sequestration or other such process is levied or enforced on or sued against, the whole or any part of its assets and such attachment or process is not discharged within 14 days;
(g) an application is made to court, or an order is made, for the appointment
of an administrator or if a notice of intention to appoint an administrator is given or if an administrator is appointed over the other party (being a company);
(h) the holder of a qualifying charge over the assets of the other party (being a company) has become entitled to appoint or has appointed an administrative receiver;
(i) a person becomes entitled to appoint a receiver over the assets of the
other party or a receiver is appointed over the assets of the other party; (j) any event occurs, or proceeding is taken, with respect to the other party in
any jurisdiction to which it is subject that has an effect equivalent or similar to any of the events mentioned in clause 14.1(b) to clause 14.1(i) (inclusive);
(k) the other party suspends, threatens to suspend, ceases or threatens to
cease to carry on, all or substantially the whole of its business; (l) the other party's financial position deteriorates to such an extent that in
the Company's opinion the Customer's capability to adequately fulfil its obligations under the Contract has been placed in jeopardy; or
(m) the other party (being an individual) dies or, by reason of illness or
incapacity (whether mental or physical), is incapable of managing his own affairs or becomes a patient under any mental health legislation.
14.2 Without limiting its other rights or remedies, the Company may terminate
the Contract with immediate effect by giving written notice to the Customer if the Customer fails to pay any amount due under this Contract on the due date for payment.
14.3 Without limiting its other rights or remedies, the Company may suspend
the supply of Services or all further delivery of Goods under the Contract or any other contract between the Customer and the Company if the Customer fails to pay any amount due under this Contract on the due date for payment, the Customer becomes subject to any of the events listed in clause 14.1(b) to clause 14.1(m), or the Company reasonably believes that the Customer is about to become subject to any of them.
14.4 On termination of the Contract for any reason: (a) the Customer shall immediately pay to the Company all of the Company's
outstanding unpaid invoices and interest and, in respect of Goods and/or Services supplied but for which no invoice has yet been submitted, the Company shall submit an invoice, which shall be payable by the Customer immediately on receipt;
(b) the Customer shall return all of the Company Materials which have not been fully paid for. If the Customer fails to do so, then the Company may enter the Customer's premises and take possession of them. Until they have been returned, the Customer shall be solely responsible for their safe keeping and will not use them for any purpose not connected with this
Contract; (c) the accrued rights and remedies of the parties as at termination shall not
be affected, including the right to claim damages in respect of any breach of the Contract which existed at or before the date of termination or expiry; and
(d) clauses which expressly or by implication have effect after termination
shall continue in full force and effect. 15. FORCE MAJEURE 15.1 For the purposes of this Contract, Force Majeure Event means an event
beyond the reasonable control of the Company including but not limited to strikes, lock-outs or other industrial disputes (whether involving the workforce of the Company or any other party), failure of a utility service or transport network, act of God, war, riot, civil commotion, malicious damage, compliance with any law or governmental order, rule, regulation or direction, accident, breakdown of plant or machinery, fire, flood, storm or default of suppliers or subcontractors.
15.2 The Company shall not be liable to the Customer as a result of any delay or
failure to perform its obligations under this Contract as a result of a Force Majeure Event.
16. GENERAL 16.1 Assignment and other dealings
(a) The Company may at any time assign, transfer, mortgage, charge,
subcontract or deal in any other manner with all or any of its rights under the Contract and may subcontract or delegate in any manner any or all of its obligations under the Contract to any third party.
(b) The Customer shall not, without the prior written consent of the Company,
assign, transfer, charge, subcontract, declare a trust over or deal in any other manner with all or any of its rights or obligations under the Contract.
16.2 Notices (a) Any notice or other communication given to a party under or in connection
with this Contract shall be in writing, addressed to that party at its registered office (if it is a company) or its principal place of business (in any other case) or such other address as that party may have specified to the other party in writing in accordance with this clause, and shall be delivered personally or sent by prepaid first-class post or other next working day delivery service, or by commercial courier, fax or e-mail.
(b) A notice or other communication shall be deemed to have been received: if delivered personally, when left at the address referred to in clause 12.2(a); if sent by pre-paid first class post or other next working day delivery service, at 9.00 am on the second Business Day after posting; if delivered by commercial courier, on the date and at the time that the courier's delivery receipt is signed; or, if sent by by fax or e-mail, one Business Day after transmission.
(c) The provisions of this clause shall not apply to the service of any proceedings or other documents in any legal action
16.3 Severance (a) If any provision or part-provision of the Contract is or becomes invalid,
illegal or unenforceable, it shall be deemed modified to the minimum extent necessary to make it valid, legal and enforceable. If such modification is not possible, the relevant provision or part-provision shall be deemed deleted. Any modification to or deletion of a provision or part-provision under this clause shall not affect the validity and enforceability of the rest of the Contract.
(b) If one party gives notice to the other of the possibility that any provision or
part-provision of this Contract is invalid, illegal or unenforceable, the parties shall negotiate in good faith to amend such provision so that, as amended, it is legal, valid and enforceable, and, to the greatest extent possible, achieves the intended commercial result of the original provision.
16.4 Waiver
A waiver of any right under the Contract or law is only effective if it is in writing and shall not be deemed to be a waiver of any subsequent breach or default. No failure or delay by a party in exercising any right or remedy under the Contract or by law shall constitute a waiver of that or any other right or remedy, nor prevent or restrict its further exercise of that or any other right or remedy. No single or partial exercise of such right or remedy shall prevent or restrict the further exercise of that or any other right or remedy.
16.5 No Partnership or Agency
Nothing in the Contract is intended to, or shall be deemed to, establish any partnership or joint venture between any of the parties, nor constitute either party the agent of another party for any purpose. Neither party shall have authority to act as agent for, or to bind, the other party in any way.
16.6 Third Parties
Page 136 Page 137
A person who is not a party to the Contract shall not have any rights to enforce its terms.
16.7 Variation
Except as set out in these Conditions, no variation of the Contract, including the introduction of any additional terms and conditions shall be effective unless it is agreed in writing and signed by the Company.
16.8 Governing Law
This agreement and any dispute or claim arising out of or in connection with it or its subject matter or formation (including non-contractual disputes or claims) shall be governed by and construed in accordance with the law of England and Wales.
16.9 Jurisdiction
Each party irrevocably agrees that the courts of England and Wales shall have exclusive jurisdiction to settle any dispute or claim arising out of or in connection with this Contract or its subject matter or formation (including non-contractual disputes or claims).
Cutting Edge Bar Design - Striking Red Banquettes with Custom Lighting and Assorted Loose Furniture
Industrial Themed Outfit - Complete with High Stools, Poseur Height Tables and Banquette Seating
Contemporary, Bespoke Banquette Seating for a Luxury Restaurant - Armchairs and Elegant Dining Tables to Suit
COPYRIGHT © 2018 ATLAS CONTRACT FURNITURE
[email protected]+44 (0) 1202 400999
Atlas Contract Furniture Ltd.14a Airfield RoadChristchurchBH23 3TGUnited Kingdom
WebsiteEmail
Telephone
Address
[email protected]+44 (0) 1202 400999
WebsiteEmail
Telephone
‘The Bespoke Seating Manufacturers’ from Christchurch, Dorset.
Associated Services
Contact Our Friendly Sales Team Today
We are ’Specialists in High Quality Finishing Services’.
Interior Finishes • Exterior Finishes • Deep Polyester Glosses • Lacquers • Staining • Antiquing • Distressing
GortFlameproofing Services