01/28/2019Revision:

Page: 1 of 5

Film Forming LubricantSAFETY DATA SHEET

09/27/2018Supersedes Revision:

101EUProduct Code:

Film Forming LubricantProduct Name:Oil Center Research International, LLCCompany Name:616 West Pont Des Mouton RoadLafayette, LA 70507,

01-703-527-3887Emergency Contact:

(337)232-2496Phone Number:

1. Product and Company Identification

2. Hazards IdentificationSkin Corrosion/Irritation, Category 3

No phrases apply.GHS Precautionary Phrases:

P332+313 - If skin irritation occurs, get medical advice/attention.GHS Response Phrases:

No phrases apply.GHS Storage and DisposalPhrases:

H316 - Causes mild skin irritation.GHS Hazard Phrases:

WarningGHS Signal Word:

Chronic inhalation may cause effects similar to those of acute inhalation.Potential Health Effects(Acute and Chronic):

May cause severe eye irritation.Eye Contact:

Causes skin irritation. May cause hives. May cause dermatitis.Skin Contact:

May cause irritation of the digestive tract. Ingestion may cause allergic.Ingestion:

May cause allergic respiratory reaction. May cause asthmatic attacks due to allergicsensitization of the respiratory tract.

Inhalation:

CAS # Components (Chemical Name)

3. Composition/Information on Ingredients

Concentration

NA Mineral Oil 64.0 -81.0 %

NA Thickener 4.0 -9.0 %

NA Coloring agent 0.8 -4.5 %

MIRS MSDS, (c) A V Systems, Inc. GHS format

01/28/2019Revision:

Page: 2 of 5

Film Forming LubricantSAFETY DATA SHEET

09/27/2018Supersedes Revision:

In Case of Inhalation:

4. First Aid MeasuresEmergency and First AidProcedures:

Treat symptomatically and supportively.Note to Physician:

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper andlower eyelids. Get medical aid immediately.

In Case of Eye Contact:

Get medical aid. Flush skin with plenty of water for at least 15 minutes while removingcontaminated clothing and shoes.

In Case of Skin Contact:

Call a poison control center. If swallowed, do not induce vomiting unless directed to do soby medical personnel. Never give anything by mouth to an unconscious person. Getmedical aid.

In Case of Ingestion:

Remove from exposure and move to fresh air immediately. If not breathing, give artificialrespiration. If breathing is difficult, give oxygen. Get medical aid.

5. Fire Fighting MeasuresFlash Pt: > 232.22 F Method Used: Setaflash Open Cup

Dusts at sufficient concentrations can form explosive mixtures with air. Wear appropriateprotective clothing to prevent contact with skin and eyes. Wear a self-contained breathingapparatus (SCBA) to prevent contact with thermal decomposition products.

Fire Fighting Instructions:

No data available.Flammable Properties andHazards:

Autoignition Pt: NA

Explosive Limits: LEL: No data. UEL: No data.

For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam.For small fires, use water spray, dry chemical, carbon dioxide or chemical foam.

Suitable Extinguishing Media:

No data available.Hazardous Combustion

Products:

6. Accidental Release MeasuresUse proper personal protective equipment as indicated in Section 8.Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container.Provide ventilation.

Steps To Be Taken In CaseMaterial Is Released OrSpilled:

7. Handling and StorageUse with adequate ventilation. Avoid contact with skin and eyes. Avoid ingestion andinhalation.

Precautions To Be Taken inHandling:

Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area awayfrom incompatible substances.

Precautions To Be Taken inStoring:

8. Exposure Controls/Personal Protection

OSHA TWA ACGIH TWACAS # Partial Chemical Name Other Limits

No data.No data. No data. NA Mineral Oil

No data.No data. No data. NA Thickener

No data.PEL: 15 (dust) mg/m3 TLV: 10 mg/m3 NA Coloring agent

MIRS MSDS, (c) A V Systems, Inc. GHS format

01/28/2019Revision:

Page: 3 of 5

Film Forming LubricantSAFETY DATA SHEET

09/27/2018Supersedes Revision:

No data available.Respiratory Equipment(Specify Type):

Wear appropriate protective eyeglasses or chemical safety goggles as described byOSHA's eye and face protection regulations in 29 CFR 1910.133 or European StandardEN166.

Eye Protection:

Wear appropriate gloves to prevent skin exposure.Protective Gloves:

Wear appropriate protective clothing to minimize contact with skin.Other Protective Clothing:

Facilities storing or utilizing this material should be equipped with an eyewash facility anda safety shower. Use adequate ventilation to keep airborne concentrations low.

Engineering Controls(Ventilation etc.):

9. Physical and Chemical PropertiesPhysical States: [ ] Gas [ ] Liquid [ X ] Solid

Melting Point: No data.

Boiling Point: No data.

Flash Pt: > 232.22 F Method Used: Setaflash Open Cup

Explosive Limits: LEL: No data. UEL: No data.

Vapor Pressure (vs. Air ormm Hg):

No data.

Vapor Density (vs. Air = 1): No data.

Evaporation Rate: No data.

pH: No data.

Paste.Mild Petroleum.Appearance: tan.

Appearance and Odor:

Flammability (solid, gas): No data available.

Specific Gravity (Water = 1): 0.893 at 77.0 F

Density: 7.29 LB/GAL at 77.0 F

Solubility in Water: < 1

Decomposition Temperature: No data.

Autoignition Pt: NA

Viscosity: No data.

Octanol/Water PartitionCoefficient:

No data.

10. Stability and Reactivity

Incompatible materials.Conditions To Avoid -Instability:

Unstable [ ] Stable [ X ]Stability:

Acacia precipitates or gels when added to ferric salts, borax, basic lead acetate, Alcohols,sodium silicate.

Incompatibility - Materials ToAvoid:

Carbon monoxide.Hazardous Decomposition orByproducts:

Will occur [ ] Will not occur [ X ]Possibility of HazardousReactions:

No data available.Conditions To Avoid -Hazardous Reactions:

MIRS MSDS, (c) A V Systems, Inc. GHS format

01/28/2019Revision:

Page: 4 of 5

Film Forming LubricantSAFETY DATA SHEET

09/27/2018Supersedes Revision:

CAS # Components (Chemical Name) NTP

11. Toxicological InformationEpidemiology: No data available.Teratogenicity: No data available.

Toxicological Information:

CAS# 9000-01-5: Not listed by ACGIH, IARC, NTP, or CA Prop 65.Carcinogenicity/OtherInformation:

IARC ACGIH OSHA

NA Mineral Oil n.a. n.a. n.a. n.a.

NA Thickener n.a. n.a. n.a. n.a.

NA Coloring agent n.a. 2B A4 n.a.

No data available.

12. Ecological Information

Chemical waste generators must determine whether a discarded chemical is classified asa hazardous waste. US EPA guidelines for the classification determination are listed in 40CFR Parts 261. Additionally, waste generators must consult state and local hazardouswaste regulations to ensure complete and accurate classification.RCRA P-Series: None listed.RCRA U-Series: None listed.

Waste Disposal Method:

13. Disposal Considerations

14. Transport Information

Not regulated as a hazardous materialDOT Proper Shipping Name:DOT Hazard Class:UN/NA Number:

LAND TRANSPORT (US DOT):

No information available.TDG Shipping Name:

LAND TRANSPORT (Canadian TDG):

UN Number:Hazard Class: TDG Classification:

No information available.ADR/RID Shipping Name:

LAND TRANSPORT (European ADR/RID):

UN Number:Hazard Class:

Not regulated as a hazardous materialIMDG/IMO Shipping Name:

MARINE TRANSPORT (IMDG/IMO):

Not regulated as a hazardous materialICAO/IATA Shipping Name:

AIR TRANSPORT (ICAO/IATA):

CAS # Components (Chemical Name)

15. Regulatory Information

S. 302 (EHS) S. 304 RQ S. 313 (TRI)

EPA SARA (Superfund Amendments and Reauthorization Act of 1986) Lists

NA Mineral Oil No No No

NA Thickener No No No

NA Coloring agent No No No

MIRS MSDS, (c) A V Systems, Inc. GHS format

01/28/2019Revision:

Page: 5 of 5

Film Forming LubricantSAFETY DATA SHEET

09/27/2018Supersedes Revision:

This material meets the EPA 'Hazard Categories' defined for SARA Title III Sections 311/312 as indicated:[ ] Yes [X] No Explosive

[ ] Yes [X] No Flammable (gases, aerosols, liquid, or solid)

[ ] Yes [X] No Oxidizer (liquid, solid or gas)

[ ] Yes [X] No Self-reactive

[ ] Yes [X] No Pyrophoric (liquid or solid)

[ ] Yes [X] No Pyrophoric gas

[ ] Yes [X] No Self-heating

[ ] Yes [X] No Organic peroxide

[ ] Yes [X] No Corrosive to metal

[ ] Yes [X] No Gas under pressure (compressed gas)

[ ] Yes [X] No In contact with water emits flammable gas

[ ] Yes [X] No Combustible Dust

[ ] Yes [X] No (Physical) Hazard Not Otherwise Classified (HNOC)

[ ] Yes [X] No Acute toxicity (any route of exposure)

[X] Yes [ ] No Skin Corrosion or Irritation

[ ] Yes [X] No Serious eye damage or eye irritation

[ ] Yes [X] No Respiratory or Skin Sensitization

[ ] Yes [X] No Germ cell mutagenicity

[ ] Yes [X] No Carcinogenicity

[ ] Yes [X] No Reproductive toxicity

[ ] Yes [X] No Specific target organ toxicity (single or repeated exposure)

[ ] Yes [X] No Aspiration Hazard

[ ] Yes [X] No Simple Asphyxiant

[ ] Yes [X] No (Health) Hazard Not Otherwise Classified (HNOC)

CAS # Components (Chemical Name) Other US EPA or State Lists

NA Mineral Oil CAA HAP,ODC: No; CWA NPDES: No; TSCA: Yes -

Inventory; CA PROP.65: No; MA Oil/HazMat: No; NJ EHS:

No; NY Part 597: No; PA HSL: No

NA Thickener CAA HAP,ODC: No; CWA NPDES: No; TSCA: Yes -

Inventory; CA PROP.65: No; MA Oil/HazMat: No; NJ EHS:

No; NY Part 597: No; PA HSL: No

NA Coloring agent CAA HAP,ODC: No; CWA NPDES: No; TSCA: Yes -

Inventory; CA PROP.65: Yes: Canc.; MA Oil/HazMat: No; NJ

EHS: No; NY Part 597: No; PA HSL: Yes - 1

CAS # Components (Chemical Name) International Regulatory Lists

NA Mineral Oil Canadian DSL: Yes; REACH: Yes - (R): Full, (P), C2

NA Thickener Canadian DSL: Yes; REACH: Yes - (P)

NA Coloring agent Canadian DSL: Yes; REACH: Yes - (R): Full, (P)

16. Other Information

No data available.Additional Information AboutThis Product:

Hazard Rating System:Instability

Special Hazard

Health

FlammabilityHEALTHFLAMMABILITY

PPEPHYSICAL

The information contained here is based upon data available to us and reflects our bestprofessional judgment. Since it is impossible to anticipate the conditions under which ourproducts may be used, we cannot guarantee that the recommendations will be adequatefor all individuals and situations. Each user of this product should determine the suitabilityof the product with zero or minimum hazards. Our products are improved daily asup-to-date information and research data is obtained from our suppliers in our quest touse products with less or no hazards. Please feel free to contact us for currentinformation.

Company Policy orDisclaimer:

1

01

B

11

0

01/28/2019Revision Date:

NFPA:HMIS:

MIRS MSDS, (c) A V Systems, Inc. GHS format