lorenz deepmax x5 , lorenz deepmax x6 - gold detectors · dimensions electronics control box: 18 cm...

Both the X5 & X6 detectors have the same performance. X6 has an internal GPS data logger,the user can transfer the data to a laptop and see target images after the search is complete.For the X5, Gold Detectors offer the ICON DATA imager- an external real time target imagingdevice. Lorenz Deepmax X5 & Lorenz Deepmax X6 series main unit

• Backlight display with target classification icons for ferrous/non ferrous metals & conductivity readings 0–99dependable upon metal type and size.• Bar graph to estimate depth and target center.• DELAY– rejection of small trash in levels,• ZERO– reset key to the ground conditions,• AUTO– automatic tuning to changes of ground conditions (motion mode),• SENS– adjustable sensitivity (detection depth) in levels,• Ability to scan with or without data image capture,• Backlight, Volume etc.• Grips for hanging it to the supplied holster• GND modes– For fine elimination of minerals or specific metal objects with no loss of depth• Frequency of operation variable for canceling out electromagnetic interference from power lines• Tuning audio• In built aluminum cooler of the electronic circuit• Coil connector to input round coils or large frame coils• Power supply connector from external 12V battery• X5 Connects to the external "ICON DATA" real time target imager, without the need to transfer data to laptop• X6 has internal data logger with USB stick for firmware-updates and data file transport to laptop for graphictarget imaging• CE & FCC certificated





Dimensions

electronics control box:18 cm x 9.5 cm x 10 cm

carrying case for LORENZ DEEPMAX:40 cm x 30cm x 22cm

1m x 1m frame coil (collapsed):110 cm x 15 cm x 15 cm

35 cm search coil with extended S-rod: length: 150 cm35cm search coil with collapsed S-rod: length: 120 cm

Features

• New GBS pulse induction technology: Top detector with metal classification on LCD screen• Power supply from external 12 volt 7,2 Ah battery• High sensitivity, depth greater than 10 m. when detects big objects with the 3 x 3m frame search coil.Cancels out interference from ground minerals and radio waves• 3 ground rejection modes (GROUND 1, 2, 3), tune out ground minerals for stable operation to all countries globally• 2 target identification facilities on screen:- 1. numbers 00 - 99 according to metal type (conductivity) & size (small, medium, big). ( operates on all heads )- 2. FEROUS / NON FEROUS icons generated from the magnetic or non - magnetic target composition (iron or precious metal).( operates only on DOUBLE D heads )• Data files can be transferred to a laptop for visualization of targets• Standard equipment comes with 2 heads (the displayed 35 cm DD round coil and 1m X 1m frame coil)• Other heads available: 26 cm round, 45 cm round, 1,5Χ1,5m (cable coil) 2Χ2m (cable), 3Χ3m (cable).The frame and cable heads reject automatically small shallow trash• Cylindrical probe 4cm diameter x 25 length, to be used in wells, cracks, narrow spaces

The 35cm "DOUBLE D" coilRecognized by it's 2 coil cables- a world novelty, for pulse inductiondetectors. Separate transmitters and receivers inside, sendcontinuous target information, improving the reliability of targetidentification on screen.Until now pulse induction detectors had a limited time of pulsetransmitting and receiving, and poor receiving signal,because their "single" coils had to switch between transmittingto receiving phases with time delay on every phase.

The 1m X 1m frame coilComparable to the small round coils the frame coil increasesdetection depth, small metals/single coins are not detected. Usefulwhen a bigger, hidden in greater depth target is needed to befound.Cable coils of 8m and 12m perimeter are available for"do-it-yourself" construction on a pvc tube frame, of deeper2m x 2m and 3m x 3m frame coils. The target detectedby a frame coil can be pinpointed in accuracy with a round coil.

Dimensions





Features




Dimensions





Features




electrical Data:Search-frequency with small/large search coils connected:

approx. 2000 / 1000 pulses per secondAudio target response freq. voltage controlled oscillator: 0 - 6000 Hz

Power source: external 12V / 7,2Ah lead batteryUsage time: approx. 5 to10 hours depending on temperature and coil connected

Battery charger: rapid charger with interchangeable AC-plug 100-240 VRecharge time: max. 10 hours on empty battery

Operating temperature: - 5 C - + 50C

GPS data logger ( X6 )six channel data acquisition, supported by GPS:

storage media USB-stick (2.0)number of fields: 99

sampling rate: 16 per secondResolution: 24 bit GPS module with USB storage media:

• High Sensitivity: -160 dBm• DGPS, WAAS, EGNOS and MSAS Support

• very short TTFF Time To First Fix• position accuracy 2,5 m CEP, 5,0 m SEP/SBAS, 2,0 m CEP, 3,0 m SEP

WeightsLORENZ DEEPMAX X5/X6 electronics control box: approx. 1100 g

Shoulder and belt strap with battery pack: approx. 3330 gCarrying case with LORENZ DEEPMAX X5/X6 inside: approx. 7000 g

Telescopic S pole: approx.470 g

Search coils (interchangeable) electrostatic insulated (shielded) & waterproof:26cm double D coil necessary for FERROUS / NON-FERROUS indications:

Weight approx. 470 g*35cm single coil: Weight approx.520 g*

35cm double D coil necessary for FERROUS / NON-FERROUS indications:Weight approx.660g*

45cm single coil: Weight approx. 620 g*1m x 1m frame coil with cable inside tubes: Weight approx. 2500 g

Universal cable coil 8m perimeter (can be used for 0,7mx0,7m - 1mx1m - 2mx2m &compensated

1m x 2m frame mounted search coil) Weight approx.380 gUniversal cable coil 12m perimeter (can be used for 1mx1m; 1,5mx1,5m; 3mx3m frame

mounted search coil) Weight approx. 880 g1mx1m double frame coil kit for interference elimination.

“Y’ Adaptor cable for interference eliminating search coil systems.

Detection depths

ICON DATAReal time data logger, 2D & 3D imager, and target analysisdevice for the DEEPMAX X5. ..700 Euro

Super probeIs a cylindrical search head for use with all pulse induction metal detectors (forexample Lorenz, Pulse star). Suitable to operate at places where there is no abilityto use a conventional sized coil. Super probe is able to scan at narrow spaces,walls, rock cracks, holes, wells filled with water as it is fully waterproof.150 Euro

26 cm search coilUsefull for the location of small objects like coins for example. ( A telescopic polewith armrest is necessary )270 Euro

26 cm DD-search coilUsefull for the location of small objects like coins for example. Separatetransmitting and receiving windings offer more stable operation on soils with highcontents of ironoxides (minerals). This coil is required for ferrous/non-ferrousindications. ( A telescopic pole with armrest is necessary )370 Euro

35 cm search coilHighly sensitive search coil has extreme depth capabilities on single coins and medium sized

objects. (A telescopic pole with armrest is necessary)300 Euro

35 cm DD-search coilSeparate transmitting and receiving windings offer more stable operation on soils with highcontents of iron oxides (minerals). Pinpointing small metal pieces is very easy with the double D-search coil, which can be used for most search applications. This coil is required for ferrous/non-ferrous indications. (A telescopic pole with armrest is necessary)380 Euro















45 cm search coilThis search coil can be operated by a single person (weighs only 600 g). It offers

extreme depth rages on single coins or bigger objects burried deep in the ground.Depth ranges of more than 1 meter for a metal object of the size of a soft drink can(0,33 l) make this coil interesting for a lot of different search and locating purposes.(A telescopic pole with armrest is necessary)320 Euro

1 x 1 m frame coilFrame coil for the fast location of medium sized or larger metal objects atgreat depth. Can be operated by two persons carrying the coil with thesupplied straps. The coil cable is protected inside the tubes. This square frameis very easy to use and can be simply assembled or disassembled for transport.Small nails and single coins will be ignored automatically with this coil.380 Euro

1 x 1 m double frame coil kitThis specially designed double frame coil kit consits of two 1 x 1 m framecoils mounted on each other at a distance of approx. 60cm. Because of itsability to cancel out interferences from powerlines or radio transmitters itcan be used in urban areas where single loop coils will suffer from falsesignals.1300 Euro

Universal cable coilCan be wound to different coils:8m cable coil: 0,67 x 0,67m - 1 x 1m - 1 x 2m - 2 x 2m. 220 Euro12m cable coil: 1 x 1m - 1,5 x 1,5m - 3 x 3m. 300 Euro

These cable coils can be arranged to three or four different frame coilsby simply fastening one, two or three windings on a metal free framewith tape for example. With those frame mounted coils large areascan be covered in a short time.This is especially usefull when looking for bigger deeply burried metalobjects while ignoring those smaller metal pieces at the surface of theground.

Adjustable shoulder and belt strapfor easy carrying of Deepmax X6 and the battery pack100 Euro

Power- Additional Battery pack- Charger wide-rangingAC-input 100-240V- AC-plug(Euro / USA / UK / Australia)( depends on series )190 Euro

Extension cable for frame coils150 Euro

Telescopic polewith armrest for use with smaler searchcoils170 Euro









The X6 Data Logger is a built-in feature of the DEEPMAX X6 Series!Specifications

• Six channel data acquisition: three Delay channels, two Ground channels, one Target Classification channel• Storage media: USB-Stick (2.0)• Number of fields (one USB-Stick only): 99• Sampling rate 16 samples per second• Resolution: 24 bit• Supported by GPS

Below are 2D and 3D graphic maps on the same field

To generate colour, image, surface or contour maps with the Lorenz DEEPMAX X6, additional Hard- andSoftware is necessary. A very sophisticated data logger function will take simultaneously six channelsof data when you go over the ground, and stores the information into memory when this function isselected.After collecting field data the Surfer 8 Software easily and accurately transforms the data stored on theUSB-Stick into colour, contour, surface, image or vector maps on a computer in minutes.

An additional Scripter Software will therefore automatically generate twelve maps with each field. Sixare two-dimensional and six three-dimensional.The operator can therefore choose between different gridding and mapping methods.The new Data Logger Hard- and Software developed by Lorenz Detecting Systems is first of all easy touse, very accurately working and affordable.Only a few controls of the DEEPMAX X6 will make data acquisition a pleasure for both beginners andprofessionals like engineers, geologists, archaeologists, scientists and many more.These users will investigate mainly for waste disposal, meteorites, unexploded ordnance, or lostaircrafts.

No non-sense functions will confuse the operator. Six different maps will be generated simultaneouslywhen covering the ground with multiple tracks. Each scan/ map is different depending on the electronicanalysis method and therefore will not only give different sensitivity ranges, but can be the key to theprobable kind of metal buried in the ground. There is clearly a difference in the signature metal objectsand ground conditions will give for example. Areas of disturbances in the scans will directly lead to thedifferent metals or ground signals and therefore can be classified in some ways.

The operator therefore can use the different scans to his advantage in order to choose between thetargets of most interest, only by comparing the different scans/ maps.Three delay channels will produce maps with different sensitivity to small and large metal objects.Two ground channels will enable the operator to generate maps with no ground response,but with dimensions and directions for different decay curves of the eddy currents produced in a metalobject.In addition the target classification channel will display the delay of the eddy currents of each signalwith a certain intensity, to give further information on the probable kind of metal in the ground.

No matter how strong the ground is mineralised or how many different metals are located in closeproximity, this new device will ensure very good results even with difficult surrounding conditions.Faults produced by the operator or the environmental conditions like overload signals from nearbymetal objects for example, will be immediately seen when comparing the six channels.

For the professional users additional Hard- and Software will be available for storing positioning datafrom GPS and several DEEPMAX X6 detectors.Although the detector can be used with smaller search heads the data logger function is mainlydeveloped for larger metal objects, being at least 6cm x 6cm in size.Therefore frames of 1m x 1m or even bigger should be in use to achieve best results.

Gold Detectors © 2011

193 Athinon avenue, 12461 Athens Greece. Tel.: +30 210 4905398 Fax.: +30 210 4256653

Cell. +30 6977857861 Web. golddetectors.gr E-mail. [email protected]

mailto:[email protected]

lorenz deepmax x5 , lorenz deepmax x6 - gold detectors · dimensions electronics control box: 18 cm...

Documents