loto eng cat8 spark eroder · loto-eng via g. presciani, 50019 sesto fioren no italy...
TRANSCRIPT
LOTO-eng Via G. Presciani, 50019 Sesto Fioren no ITALY www.loto-eng.com [email protected]
Disclaimer: Op ons and further specifica ons are available upon request. Specifica ons in this data sheet are subject to change without no ce. No responsibility for typing or
LOTO-eng reserves the right to make changes without further no ce to any products herein. All opera ng parameters must be validated for each customer application by customer’s
Diamond Anvil Cells (DACs) are powerful tools for high pressure research
Spark Eroder
Product Code: SEB-400
TECHNICAL DATA
DRILLING DIMENSIONS Microns 50-400
DRILLING MATERIAL GASKET Stainless steel, Rhenium
MAGNIFICATION 200x and camera software
SOFTWARE SED SPARK EA
FAST DRILLING 25 micron/min (dependent material and hole)
SOFTWARE CONTROL Windows 2008/2010
HIGHLIGHTEasy to align,
Save the tip during an accidental straight
100%success making the hole
Software to control all parameters
The SPARK E400 an EDM machine, realize a manufacturing process whereby a desired shape (hole) is obtained using electrical discharges (sparks). Material is removed from the workpiece (gasket) by a series of rapidly recurring current discharges between two electrodes (tip and gasket) separated by a dielectric liquid and subject to an electric voltage. Spark E 400 is an automatic spark eroder system designed with innovative concepts and solutions with decisive advantages to use in DAC’s cell utility for a fast and easy drilling of the gasket.