lotos - glashusen.se · «lotos» hotbed is designed to create a climate favorable for the...
TRANSCRIPT
LOTOS
0,89 m
2,1 m
0,8 m
Систеmа mенеджmента качества (СMК) ООО «Воля» сертифицирована на соответствие требованияm стандарта ISO 9001:2008
Сертифицировано Русскиm Регистроm
hotbed under the cellular polycarbonate
pages 2-3
pages 4-12
Technical certificate
Assembly manual
2
Технический паспорт/ПАРНИК «ЛОТОС»
Description
«LOTOS» hotbed is designed to create a climate favorable for the cultivation of horticultural crops on farmlands.
Hotbed frame is made of galvanized steel tubes. Assembly is carried out using screwsand nuts. Supply scope includes all the parts required to fix the cladding.Hotbed cladding can be included in supply scope at the customer’s request. Each set requires 1
2,1х3m polycarbonate sheet of 4 mm thickness.
The assembly and operation of the «LOTOS» hotbed shall be carried out strictly in accordance with the instruction manual and the operating rules laid down in the data sheet. Technical data sheet shall be kept.!
Operation rules
before using, the hotbed should be assemblied and installed in accordance with instructions. If the hotbed is installed by third parties, customer should check the assembling quality for compliance with the instructions.
Do not install a hotbed near the buildings and trees from which snow orice can fall. Keep the recommended distance of not less than 2 m. Hotbed is designed to withstand
the wind not more than 24 m/s.There is no need to remove horbed cladding for the winter period, but it is necessary to leave the
hotbed open, with inner cover slided under the outer one
3
Технический паспорт/ПАРНИК «ЛОТОС»
Manufacturing facility: LLC «Volya» 141983, Dubna, Moscow region, Severnyi per., 8. Manufacturer is responsible for the quality of products in accordance with the RF Civil Code. The company reserves the right to
make changes in the hotbed design.
Manufacturing date:
Warranty liabilities
1. the manufacturer is responsible for the completeness of the product.2. the manufacturer is responsible for assemblability of the structure in accordance with instructions.3. the manufacturer is responsible for the durability of structure within specified operation rules.4. Term for making claims - 24 months from the date of purchase.
Terms of warranty liabilities
Cleaning and washing of the polycarbonate sheets.
Warranty does not apply to cases of:
1. Structure installation in violation of instruction requirements.2. Violation of the rules of operation.3. inappropriate use of the structure.4. The presence of traces of corrosion on the part edges, since it does not affect the performance characteristics of the structure.4. Deformation of the hotbed as a result of ground movement.5. Floods, hurricanes and other natural disasters.
1. Rinse the sheet with warm water.2. wash the sheet with a solution of mild soap or household detergent and warm water, using a soft cloth or sponge to remove dirt.3. Rinse with cold water and wipe with a soft cloth.
Never use abrasives or highly alkaline cleaning compositions for cleaning polycarbonate sheets. Dry rubbing of the surface will damage the protective layer of the cladding and shorten its shelf life. Never rub the surface of polycarbonate sheets with brushes, metallic cloth or other abrasive materials.
when disinfecting the greenhouse from pathogens causing fungal and bacterial diseases, do not use «sulfur blocks» to avoid frame corrosion (blackening).
Cellular polycarbonate shall be installed strictly defined side out (towards the sun), which has a protective layer. The protective layer is usually at the side with the inscriptions on the transport film. The film on the other side of sheet is transparent. After marking the sheet, but prior to its cutting, make a mark on the protected side of the sheet for each piece: after removal of the transport film sheet sides are not visually different. The transport film is stripped from both sides immediately before fixing the cladding on the frame.
4
Cover sealing
2,1m х 20,472m
х 2
Inner cover sealing
0,438m х 2
Intercover sealing
2,04m х 10,442m
х 2
№1BaseL=0,85 m х 2
№2PoleL=0,66 m х 4
№3SpanL=2,05 m х 5
№4Right crossbar L=0,89 m х 1
№4-1Left crossbar L=0,89 m х 1
№5Handle spanL=2,05 m х 1
№6Big arc0,70х0,15 х 2
№7Big arc vertical radius L=0,45 m х 2
№8Big arc right radiusL=0,47 m
х 1
№8-1Big arc left radius
L=0,47 mх 1
№9Small arc0,64х0,13 х 2
№10Small arc vertical radiusL=0,42 m
х 2
№11Small arc right radiusL=0,44 m
х 1
№11-1Small arc left radiusL=0,44 m
х 1
№12inner spanL=1,99 m х 1
№13Side cornerL=1,05 m х 8
№14End corner L=0,89 m х 2
№15Outer cover corner L=0,45 m
х 2
№16Corner for inner cover L=1,02 m х 8
№17inner spanfor handleL=1,99 m
х 1
№18Уголок торцевой нижний L=0,84 m х 2
Plate х 2
Screw M4х35 х 4
Screw M6х30 х 4
Screw M6х25 х 36
Nut M4 х 4
Nut M6 х 4
Washer M6 х 4
Axis х 4Bushrubber х 2Washerlocking х 8
Screwself-tapping х 164
Handle х 2
5
х2
M6
х30
1
№4
№4-1
№4-1
№1
№1
№3
№3№3
№3
№4
№2
№3
№2№2
№2
№2
№1 №3
№2
х1
х2х2
х2M
6х2
5
х2
M6
х25
6
2
№8-1
№8
№8
№8
№3
№5
№6
№6
№7
№7
№7
№6
№5
№6
№7
№3
х2
M6
х25
х1
M6
х25
х2
M6
х25
7
3
№12№17
№10
№10
№9
№11-1
№11-1
№10
№17
№11
№11-1
№9
№9
№9
№12
№10
х2
M6
х25
х2
M6
х25
х1
M6
х25
8
4
х2
х1
L1
L2
L1=L2!
0,3 m
9
5
5
3
26
4
1
210020
40
886
886
438
468
468
438
2100
3000
438 359 359 757 698
438
468359
468
6
6
41
146
2
1
2 2 3 5
4
10
N18 N1N8
N4
N15
N14
6
N14
N4
N11-1
х2х1
х1
х1
0,472m х1
N7N10
0,442m х1
11
N16N3
N13
N12
N16
N13
N13
N3
х164
2,1m х1
2,04m х1
N3
N3
12
8
7 х1
х2
х2
х1
х2
х2