love & glory - marcus fabrics · 2013. 12. 11. · love & glory fabric by faye burgos quilt by...

FREE PROJECT

LOVE & GLORY

Fabric by Faye Burgos Quilt by Heidi Pridemore

Throw Quilt Size (Single Star Border)- 48” x 66” Twin Quilt Size (Double Star Border) – 64” x 82"

Our TWIN SIZE is perfect for

Quilts of Valor

www.qovf.org

Throw Quilt Size - 48” x 66” Twin Quilt Size – 64” x 82” FABRIC REQUIREMENTS & CUTTING GUIDE

MARCUS FABRICS 980 Avenue of the Americas, New York, NY 10018 www.MarcusFabrics.com

Throw Quilt (Small) Cutting Instructions

Fabric A- Love & Glory panel 2940-0122 1 panel Fussy cut the panel just inside the red border (approximately 23 ½” x 40 ½”)

Fabric B- Red Weave 0892-0111 2/3 yard

Cut two 2 ½” x 40 ½” strips. Cut two 2 ½” x 27 ½” strips Cut three 2 ½” x width of fabric (WOF) strips.

Fabric C- Blue Weave 0892-0160 1 ¼ yards

Cut four 1 ½” x WOF strips. Sew the strips together and cut two 1 ½” x 64 ½” strips. Cut three 1 ½” x WOF strips. Sew the strips together and cut two 1 ½” x 48 ½” strips. Cut six 2” x WOF strips. Sub-cut the strips into (112) 2” squares. Cut six 2 ½” x WOF strips for the binding.

Fabric D- White Stars 0899-0122 ½ yard

Cut six 2 ½” x WOF strips.

Fabric E- Navy Stars 0895-0160 ¼ yard Cut one 3 ½” x WOF strip. Sub-cut the strip into five 3 ½” squares.

Fabric F- Blue Speckle 0897-0160 ¼ yard

Cut one 3 ½” x WOF strip. Sub-cut the strip into five 3 ½” squares. Fabric G- Navy Plaid 0898-0160 ¼ yard

Cut one 3 ½” x WOF strip. Sub-cut the strip into four 3 ½” squares. Fabric H- Blue Swirls 0894-0122 1 yard

Cut two 3” x 42 ½” strips. Cut two 3 ½” x 30 ½” strips. Cut four 2 ½” x WOF strips. Sew the strips together and cut two 2 ½” x 60 ½” strips. Cut three 2 ½” x WOF strips. Sew the strips together and cut two 2 ½” x 46 ½” strips.

Fabric I- Cream Weave 0892-0188 2/3 yard

Cut three 2” x WOF strips. Sub-cut the strips into fifty-six 2” squares. Cut three 3 ½” x WOF strips. Sub-cut the strips into fifty-six 2” x 3 ½” strips.

Backing- Your Choice 3 ¼ yards

Cut two 56” x 42” strips. Sew together and trim to make one 56” x 74” back. Continued

LOVE & GLORY Fabric by Faye Burgos Quilt by Heidi Pridemore PAGE 2 of 5

Twin Quilt (Large) Cutting Instructions

Fabric A- Love & Glory panel 2940-0122 1 panel Cut one 23 ½” x 40 ½” strip.

Fabric B- Red Weave 0892-0111 ¾ yard

Cut two 2 ½” x 40 ½” strips. Cut two 2 ½” x 27 ½” strips Cut six 2 ½” x width of fabric (WOF) strips.

Fabric C- Blue Weave 0892-0160 2 yards

Cut four 2 ½” x WOF strips. Sew the strips together and cut two 2 ½” x 78 ½” strips. Cut four 2 ½” x WOF strips. Sew the strips together and cut two 2 ½” x 64 ½” strips. Cut thirteen 2” x WOF strips. Sub-cut the strips into (256) 2” squares. Cut eight 2 ½” x WOF strips for the binding.

Fabric D- White Stars 0899-0122 1 yard

Cut twelve 2 ½” x WOF strips.

Fabric E- Navy Stars 0895-0160 ¼ yard Cut one 3 ½” x WOF strip. Sub-cut the strip into ten 3 ½” squares.

Fabric F- Blue Speckle 0897-0160 ¼ yard

Cut one 3 ½” x WOF strip. Sub-cut the strip into twelve 3 ½” squares. Fabric G- Navy Plaid 0898-0160 ¼ yard

Cut one 3 ½” x WOF strip. Sub-cut the strip into ten 3 ½” squares. Fabric H- Blue Swirls 0894-0122 1 ¼ yards

Cut two 3” x 42 ½” strips. Cut two 3 ½” x 30 ½” strips. Cut four 3 ½” x WOF strips. Sew the strips together and cut two 3 ½” x 72 ½” strips. Cut four 3 ½” x WOF strips. Sew the strips together and cut two 3 ½” x 60 ½” strips.

Fabric I- Cream Weave 0892-0188 1 1/4 yards

Cut seven 2” x WOF strips. Sub-cut the strips into (128) 2” squares. Cut seven 3 ½” x WOF strips. Sub-cut the strips into (128) 2” x 3 ½” strips.

Backing- Your Choice 5 yards

Cut two 89” x WOF strips. Sew together and trim to make one 72” x 90” back.

Continued



Throw Quilt Size - 48” x 66” Twin Quilt Size – 64” x 82” FABRIC REQUIREMENTS & CUTTING GUIDE

Our TWIN SIZE is perfect for

Quilts of Valor

www.qovf.org

Block Assembly Note: Quantities for the Twin size is listed in parenthesis below and on the diagrams

1. Sew one 2 ½” x 40 ½” Fabric B strip to each side of the 23 ½” x 40 ½” Fabric A panel. 2. Sew one 2 ½” x 27 ½” Fabric B strip to the top and bottom of the panel. Trim the Fabric B strip even

with the top and bottom of the panel. Trim to measure 25 ½” x 42 ½” to make the center panel. 3. Sew one 3" x 42 ½” Fabric H strip to each side of the center panel. Sew one 3 ½” x 30 ½” Fabric H

strip to the top and bottom of the center panel. 4. Place one 2” Fabric C square on the left side of one 2” x 3 ½” Fabric I strip, right sides together (Fig. 1).

Sew across the diagonal of the square from the upper right corner to the lower left corner (Fig. 1). Flip open the triangle formed and press (Fig. 2). Trim away the excess fabric from behind the triangle,

leaving a ¼” seam allowance. 1. Place another 2” Fabric C square on the right side of the 2” x 3 ½” Fabric I strip, right sides together

(Fig. 3). Sew across the diagonal of the square from the upper left corner to the lower right corner (Fig. 3). Flip open the triangle formed and press (Fig. 4). Trim away the excess fabric from behind the trian-gle, leaving a ¼” seam allowance. This completes one C/IC unit.

2. Repeat Steps 3-4 to make fifty-six (128) C/I/C units total. 3. Sew one C/I/C unit to each side of one 3 ½” Fabric E square to make the middle row. Sew one 2”

Fabric I square to each end of one C/I/C unit to make one top row. Repeat to make the bottom row. Sew the rows together to make one Block One Square (Fig. 5). Repeat to make five (10) Block One Squares total.

4. Repeat Step 6 using twenty (48) C/I/C units, twenty (48) 2” Fabric I squares and five (12) 3 ½” Fabric F squares to make five (12) Block Two Squares total (Fig. 6).

5. Repeat Step 6 using sixteen (40) C/I/C units, sixteen (40) 2” Fabric I squares and four (10) 3 ½” Fabric G squares to make four (10) Block Three Squares total (Fig. 7).

6. Sew one 2 ½” x WOF Fabric D strip to each side of one 2 ½” x WOF Fabric B strip to make one D/B/D strip. Repeat to make three (6) D/B/D strips total. Sub-cut the strips into ten (24) 6 ½” D/B/D squares and four (8) 6 ½” x 9 ½” D/B/D strips (Fig. 8).

(For TWIN size, skip to Step 19 on Page 5)

Throw Quilt Assembly (refer to the throw quilt layout while assembling the quilt top) 11. Sew two 6 ½” D/B/D squares, one Block One square, one Block Two, one Block Three

and two 6 ½” x 9 ½” D/B/D strips together to make one side border. Repeat to make the opposite side border. Sew the borders to the center panel.

12. Sew two Block Ones, one Block Two, one Block Three and three 6 ½” D/B/D squares together to the make the top border. Sew the border to the center panel.

13. Sew two Block Twos, one Block One, one Block Three and three 6 ½” D/B/D squares together to make the bottom border. Sew the border to the center panel.

14. Sew one 2 ½” x 60 ½” Fabric H strip to each side of the quilt top. Sew one 2 ½” x 46 ½” Fabric H strip to the top and bottom of the quilt top.

15. Sew 1 ½” x 64 ½” Fabric C strip to each side of the quilt top. Sew one 1 ½” x 48 ½” Fabric C strip to the top and bottom of the quilt top.

16. Layer and quilt as desired. 17. Sew the six 2 ½ x WOF Fabric C strips together, end to end with 45° seams, to make

the binding. Fold this long strip in half, lengthwise with wrong sides together, and press. 18. Bind as desired.



Twin Size Quilt Assembly (refer to the quilt layout while assembling the quilt top)

19. Sew two 6 ½” D/B/D squares, one Block One square, one Block Two, one Block Three and two 6 ½” x 9 ½” D/B/D strips together to make one side border. Repeat to make the opposite side border. Sew the borders to the center panel.

20. Sew two Block Ones, one Block Two, one Block Three and three 6 ½” D/B/D squares together to the make the top border. Sew the border to the center panel.

21. Sew two Block Twos, one Block One, one Block Three and three 6 ½” D/B/D squares together to make the bottom border. Sew the border to the center panel to make the quilt top.

22. Sew three 6 ½” D/B/D squares, one Block One, two Block Twos, one Block Three and two 6 ½” x 9 ½” D/B/D strips together to make one side border. Repeat to make the second side border (follow the quilt layout for the correct order of the blocks). Sew one border strip to each side of the quilt top.

23. Sew four 6 ½” D/B/D squares, one Block One, two Block Twos and two Block Threes together to make the top row. Sew this row to the top of the quilt top.

24. Sew four 6 ½” D/B/D squares, two Block Ones, one Block Two and Two Block Threes together to make the bottom row. Sew the row to the bottom of the quilt top.

25. Sew one 3 ½” x 72 ½” Fabric H strip to each side of the quilt top. Sew one 3 ½” x 60 ½” Fabric H strip to the top and bottom of the quilt top.

26. Sew 2 ½” x 78 ½” Fabric C strip to each side of the quilt top. Sew one 2 ½” x 64 ½” Fabric C strip to the top and bottom of the quilt top.

27. Layer and quilt as desired. 28. Sew the eight 2 ½ x WOF Fabric C

strips together, end to end with 45° seams, to make the binding. Fold this long strip in half, lengthwise with wrong sides together, and press.

29. Bind as desired.



love & glory - marcus fabrics · 2013. 12. 11. · love & glory fabric by faye burgos quilt by...

Documents