lps industrial supplies service your needs for maintenance ... catalogue.pdf · our objective is to...

LPS Industrial Supplies service your needs for Maintenance, Repair

and EHS (Environment Health Safety) related items under one roof.

Our objective is to provide the best techno–economical products to our

customers on time. With this focus we shall be servicing your needs related

to following categories:

Safety

Material Handling

Tools &

Equipments

Welding

Fasteners

Abrasives

Facility EquipmentIdentification

Ward No. : 19, Pattandur Agrahara,

Near GR Tech Park, Whitefied

Banglore-560066 (Karnataka)

Ph. No. : 080-28456406/07

R-101, Shivalik Nagar,

Bhel Ranipur,

Haridwar-249403.

Mobile No. : 09927073671

303, Gulmohar Center Point

34/A/5, Wadgaonsheri,

Pune-411014 (Maharashtra)

Ph. No. : 020-66012055/56

Fax No. : 020-66010882

A-1/134, Safdarjang Enclave

New Delhi-110029

Ph. No. : 011-26180086

Fax No. : 011-26180072

NH-10, Delhi Rohtak Road,

Kharawar By Pass, Rohtak-124001

Haryana (INDIA)

Ph. No. : 01262-305242, 199

Fax No. : 01262-305111

Head Office

Branch Office - Delhi

Plote No. : 257, Sector-6,

IMT Manesar

Gurgaon-122050 (Hryana)

Ph. No. : 0124-4009860

Branch Office - Manesar

Branch Office - Pune

Branch Office - Banglore Branch Office - Haridwar

Dear Customers,

I would like to Introduce LPS Industrial Supplies your One Stop Supplier Partner to manage your ‘C part’ requirements related to Maintenance Repair Items, Facility Protection, Safety and Personal Protection Equipments, etc. In today's World we all want to work in an Environment which is safe, lean and could take us to the growth path. To fulfill your these needs it is my gratification to offer you total ‘C Part’ management solution with wide variety of products which gives convenience and Choice to get these products as per your necessity.

To begin with we can provide solution to cater your needs related to Safety, PPEs, Tools & Equipments, Abrasives, Facility Identification, Welding, Fasteners, Cutting Tools and Miscellaneous Non Recurring Products. We do VMI (Vendor Managed Inventory), we can manage daily needs of your Consumable store and help you reduce Inventory levels at your end and provide overall reduction in your Procurement and Process Cost.

I would urge you to give us opportunity to become your preferred supplier for all your MRO needs.

Your Sincerely

Rahul Jain

email : [email protected]

MESSAGE

Evolution towards C-Part-Management

!!!Cost Savings by Lean Process!!!

Many Suppliers forC-Parts in eachCommodity line

Traditional Procurement

Customer

Many Suppliers forC-Parts per

Commodity line

Single Source

Customer

Many Suppliers for allC-Parts of all

Commodity lines

C-Part-Management

LPSIS

Customer

www.lpsis.com, Email : [email protected]

SAFETY SUPPLIES

• Safety Signage's • Lockout Tagout Devices • Sorbents & Spill Containment

• Pipe Marking Tapes • Floor Marking Tapes • Anti Skid Tapes

• Industries Printers • Glow in the Dark Tapes

• Head Protection • Eye Protection • Ear Protection • Body Protection

• Foot Protection • Fall Protection • Work Wear • Respiration

• Apron, Shoe Cover, Buffon Cap

TOOL & EQUIPMENTS

• Measuring & Leveling • VDE Safety Tools • Torque Tools

• Coro Stop Tools • Non Sparking Tools • Pneumatic Tools

• Hand Tools & Accessories • Clamping & Holding • Tool Trolley & Tool Storage Cabinet

• Corded & Cordless Power Tools & Accessories

• Bonded Abrasives • Thin Wheels • Super Abrasives

• Coated Abrasives • Non Woven Abrasives

Abrasives

SFI (Safety, Facility & Equipment Identification)

WELDING

• Welding Helmets & Eye Protection • Safety Clothing & Blankets

• Welding Cable & Accessories • Chemicals & Anti Spatter Products

• Welding Tools & Accessories • Soft Solders & Brazing Products

• Casters & Wheels • Storage Equipments • Pallets Trucks & Pallets

• Cranes • Weighing Scale

Material Handling

• Construction Material • Non Standards Items • Environment Friendly Products

• Silicone Spray • Synthetic Adhesive Lubricant Grease • Rust Looser

• Urethane Sealants • Wind Shield Sealant (PU) • Degreaser

• Anti Spatter Spray • Leak Detection Spray

• Spray Adhesive Extra Strong

'C' Parts

Chemicals

• Bolts • Nuts • Screws • Rivets • Washers

FASTENERS

INDEX

Email : [email protected]

SAFETY SUPPLIES


SAFETY SUPPLIESLPS INDUSTRIAL SUPPLIES

S1

Eye Protection

Description:

• Clear polycarbonate single lens glasses.

• Completely wraparound design allows for unrestricted vision

• Integrated polycarbonate nose piece.• Easy to use with safety helmet & ear

defender. • Lateral protection• Hard coated lens for scratch resistance• Confirms to EN166, En170• Shade-Clear

Application:

• General purpose with impact protection and maximum visibility.

Description:

• Clear polycarbonate single glass lenses.

• Adjustable & tilting nylon arms.

• Lateral protection.• Confirms to EN 166, EN 170

Application:

• Protects from particles & burrs from front & both sides as well.

Description:

• C lear po lycarbonate single lens glasses

• Direct side ventilation.• Lateral protection.• Fits easily over prescription

glasses• Arms with hole neck cord.• Confirms to EN166, En170

Application:

• Can be worn over the prescribed lenses.• Reduce fogging of the goggles during use.

Safety Goggle

Safety Goggle

Description:

• Polycarbonate single lens glasses.

• Completely wraparound design allows forunrestricted vision

• Integrated polycarbonate nose piece.• Easy to use with safety helmet & ear

defender. • Lateral protection• Hard coated lens for scratch resistance• Confirms to EN166, EN170• Shade-Smoke

Application:


Safety Goggle

Safety Goggle

Part No Pkg. Qty04010001 10Part No Pkg. Qty04010002 10




S2

Description:

• Clear polycarbonate single lens glasses

• Direct side ventilation.• Lateral protection.• Fits easily over

prescription glasses• Arms with hole neck cord.• Confirms to EN166, En170

Application:

• Can be worn over the prescribed lenses.• Reduce fogging of the goggles during use.

Safety Goggle

Part No Pkg. Qty04010007 10

Safety Goggle


Description:

• Smoked polycarbonate single lens glasses, with adjustable temples with infra-red protection.

• Provides Din 4 protection• Confirms to EN 166, EN 170

Application:

• The grey lens is for outdoor applications where light and glare can cause eye strain and fatigue.

Description:

• Black safety goggles with net on both sides

Application:

• Welding goggles- Give protection against welding radiations & external flying particles.

Safety Goggle


Wall Mounted Eye Wash


Description:• Wall Mounted Eye Wash

unit made of GI Pipes & SS valves operated by Hand, shower head made of tough Cycoloc polymer material with pop up cover guards.

Advantages: • This shower is designed to deliver deluge of

water to the effected body of person. Weather proof. The unique feature is the perforated spreader which spread water in conical shape and in Huge quantity which is not available in a normal shower. This Wall Mounted Unit saves lot of space is application oriented. Approval : ISI mark (10592)

Application:• This shower is designed to deliver deluge of

water to the effected body of person • The unique feature is the perforated spreader

which spread water in conical shape and in Huge quantity which is not available in a normal shower.

Eye Protection



S3

Eye Protection

Eye Wash Bottle


Description:• Color : Clear • Style : Single Bottle one step eye

wash• Type : Eye Wash Station • Contains One Liter Capacity Of

Clean Water / Medicatedchemicals

Application:• Soft, effective eyewash in seconds.• To be directly poured into eyes.• To remove dust and various types of foreign

particles.

Description:

• 3-Piece polycarbonate construction

• Popular unisex styling• Universal nose bridge• Completely wraparound design allows for

unrestricted vision • Integrated polycarbonate nose piece.• Easy to use with safety helmet & ear

defender. • Lateral protection• Shade-Clear

Application:


Safety Goggle


Description:

• Fashionable• Lightweight• Full side brow

protection• Universal Fit• Protective spectacles• Lateral protection

Application:


Safety Goggle


Chemical Splash Guard Goggle


Description:• Protect from

Chemical splashes• Polycarbonate

Frane/Lens• Wear over

prescription lenses• Meets ANSI Z87.1-2003• 4 one way vents allow ventilation and does

not allow splashes to enter• Fits over most prescribed eyewear• Indirect ventilation for circulation• Polycarbonate lens absorbs 99.9% UV

Application: • To protect from Grinding and chemical

splashes.



S4

Ear Protection

Reusable Ear Plug

Description:

• Material : Steel Wire • Dielectric : No • SNR- 26• Confirms to EN352-3

Application:

• Construction, compressor room, and airlines.


Description:

• Washable and reusable• One size fits all ear

canals• Special flange design for

maximum comfort• Complies ANSI Z3.19 and ANSI Z12.6• SNR- 31

Application:

• Uses body heat to adapt to the shape of the ear canal for a comfortable, personalized fit with a detachable cord system

• Feels better the longer you wear it.

Reusable Ear Plug



Ear Plug

Description:

• Tapered shape to fit the ear canal comfortably

• Soft foam seals the ear comfortably

• Smooth, dirt resistant surface for hygiene

• Comfortable for a wide range of ear sizes• Hypo-allergenic material• Bright orange color for visibility• Can be combined with ear muffs for additional

protection• Can be used with other personal protection

equipment• NRR-29DB

Application:

• Pre-shaped and tapered plugs that are easy to insert by compressing the soft self-adjusting foam.

• Consistent performance in a variety of temperatures.

Part No Pkg. Qty04030019 500Part No Pkg. Qty

Corded Ear Plug

04030017 500

Description:

• Disposable corded ear plug in PU

• SNR- 37• Confirms to EN 352-2.

Application:

• Pre-shaped and tapered plugs that are easy to insert by compressing the soft self adjusting foam.

• Consistent performance in a variety of temperatures.



S5

Ear Protection

Ear Muff

Description:

• Lightweight, economical ear muffs designed and durability in work environments

• Simple height adjustment• Wide ear cushions for

comfort• NRR-23

Application:



Ear Muff

Description:

• Ultra lightweight• Most versatile earmuff• Suitable for broad range of

w o r k s d u e t o b e t t e r attenuation

• To be used upto noise level 98DB

• NRR25

Application:



Corded Reusable Ear Plug

Description:

• S o f t , b r a i d e d c o r d provides user comfort, helps prevent loss and reduces sound vibrations from the cord

• Triple flanged design to securely fit the ear canal

• Fits wide range of canal sizes• Bright orange colour for visibility• Washable• Enhance user comfort• NRR24DB

Application:

• Easy to insert by compressing the soft self-adjusting foam. Consistent performance in a variety of temperatures.



Ear Plug Corded

Description:

• Triple flanged design to securely fit the ear canal

• Fits wide range of canal sizes

• Larger sealing surface• Washable, promotes worker hygiene• NRR25DB

Application:

• Easy to insert by compressing the soft self-adjusting foam. Consistent performance in a variety of temperatures.





S6

Description:• UV Resistant high density

polypropylene safety helmet.• Nylon Harness with comfort

wear• International louvers design for cross

ventilation of air• Comfortable Cradle• Adjustable head band Manual adjustment• Available in yellow, white, blue, red and

orange color.• Confirms to IS : 2925

Application• The present invention relates generally to a

helmet for cooling the scalp.

Safety Helmet With Ventilation

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04020031

04020032

04020033

04020034

04020035

04020036

10

10

10

10

10

10

Safety Helmet

Description:• H e l m e t w i t h p i n l o c k

suspension-Nape strap• 6-point suspension.• Color: White, Blue, Yellow, Red• Confirms to IS : 2925

Application:• General purpose head protection.

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04020001

04020002

04020003

04020004

04020005

04020006

10

10

10

10

10

10

Safety Helmet With Ventilation

Description:• UV Resistant high density

polypropylene safety helmet with Ratchet

• Nylon Harness with comfort wear

• International louvers design for cross ventilation of air

• Comfortable Cradle• Adjustable head band Manual adjustment• Available in yellow, white, blue, red and

orange color.• Confirms to IS : 2925

Application:• General purpose head protection.

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04020007

04020008

04020009

04020010

04020011

04020012

10

10

10

10

10

10

Head Protection



S7

Head Protection

Miner Safety Helmet

Description:

• Miner safety helmet with cotton head band made of H.D.P.E. shell.

• Confirms to IS: 2925- 1984

Application:

• Impact protection.

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04020045

04020046

04020047

04020048

04020049

04020050

10

10

10

10

10

10

Face Shield

Description:

• Impact resistant baseball type cap.

• P o l y u r e t h a n e c o a t e d po lyamide , l i ned w i th polyethylene & comfortable neoprene foam shell to absorb shocks.

• Adjustable single size by Velcro band from 58 to 62 cm.

• Confirms to EN812

Application:

• Food processing, Automobile, Aviation.


Helmet With Visor

Description:

• Helmet with polycarbonate visor,

• light weight• Spring type adjustment

Application:

• Agriculture, electric utility, hazardous materials, mining.


• Fiber Glass Helmet are made from glass fibre reinforced plastic

• Resistant to high heat• Easy to adjust Nape strap

head band.• Size : 520mm to 610mm

Fibre Helmet With Face Shield




S8

Hand Protection

Cotton Knitted Hand Gloves

Description:

• Genera l Purpose white cotton string knits.

• Weight: 420, 480, 600, 720, 840 gms/dzp

Application:

• Material Handling, Farming, Packing Handling.

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04050001

04050002

04050003

04050004

04050005

240

240

240

240

240

Dotted Hand Gloves

Description:

• Cotton dotted string Knits.• PVC mini dots both side.• Confirms to EN388.

Application:

• General purpose jobs requiring substantial grip


Hosiery Hand Gloves

Description:

• Size: 8”

Application:

• General purpose industrial gloves.

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

04050010

04050013

04050011

240

240

240

Rubber Gloves

Description:

• Natural rubber latex, providing good chemical resistance to acid, salts.

• Size: Small-10’’, Medium 12’’, Large.-22’’

Application:

• Food processing, Chemical Plants, petrochemical, refining.

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04050014

04050015

04050016

04050017

120

120

120

120



S9

Hand Protection

Household Rubber Gloves

Leather Hand Gloves

Description:

• All natural combined split and grain leather hide welder, split leather cuff, palm in natural cow grain.

• Split leather cuff 15 cm in length.• Excellent tear resistance.• Back and thumb in shoulder split leather.• Palm in natural cow grain leather.• Size: 8, 9, 10, 11 or S, M, L, XL.• Confirms to EN388.

Application:

• Industrial handling and maintenance, metal work, welding and related operations.


Description:

• Rubber gloves used for cement and other household applications

• Size: Small-10’’,Medium 12’’

Application:

• Food processing, Cement industry


Leather Hand Gloves

Leather Hand Gloves

Description:

• Available in sizes

ranging from 8, 9, 10, 11 or S, M, L, XL.

• Split leather cuff 14 cm in length.

• Excellent tear resistance.

• Top quality heat resistance leather

• Long life service protection glove.

Application:

• Industrial handling and maintenance, metal work, welding and related operations, cutting and related techniques, work near furnace.

Description:

• Split leather cuff 15 cm inlength.

• Reflective tape on cuff.• Excellent tear resistance.• Resistance to abrasion, cut

and perforation.• Kevlar stitching on the glove.• Kevlar knitted cotton plated liner.• Grain leather vein and knuckle protection.• Size: 8, 9, 10, 11 or S, M, L, XL.• Confirms to EN388.

Application:

• Ideal for application at 300 degree Celsius.





S10

Hand Protection

Leather Hand Gloves

Description:• Cowhide full grain palm

driver glove, wing thumb and knitted cuff with pulse protection of leather.

• Natural color • Thickness 0.9 mm – 1.1 mm • General use mechanical protection gloves. • Provides great flexibility and good dexterity. • Size: 8, 9, 10, 11 or S,M,L,XL.

Application:• Suitable for general industrial work,

transportation trade, driving, operating machinery, material handling, shipping and handling of woods.


Leather Hand Gloves

Description:• All natural split driver gloves.• Colored tape binding.• General use reinforced

mechanical protectiongloves.

• Good dexterity and great flexibility

• Abrasion, tear and perforation resistance.• Size: 8, 9, 10, 11 or S, M, L, XL.• Confirms to EN388.

Application:• Applicable for use in general handling of

too ls , c ra tes and case hand l ing , transportation jobs, warehousing and storage work.


Leather Hand Gloves


Description:• Thickness 0.9 mm – 1.1 mm.• Natural cowhide grain leather

palm and natural split on back. • General use reinforced

mechanical protection gloves. • Good dexterity and great flexibility.• Good resistance to abrasion, tear and

perforation. • Size: 8, 9, 10, 11 or S, M, L, XL.• Confirms to EN388.

Application:• Applicable for use in general handling of tools

and portable electrical tools. Storage and maintenance work, assembling and erection work.

Leather Hand Gloves

Description:• Split leather cuff 15 cm in

length.• Excellent tear resistance.• Resistance to abrasion, cut

and perforation.• Seamless Kevlar lining on the

palm.• Kevlar stitching on the glove.• Yellow dyed split welders, split leather cuff,

Kevlar stitching and Kevlar knitted.• Confirms to EN388.

Application:• Metal cutting application.• Used in heavy metal work.




S11

Hand Protection

Full Grain Leather Gloves

Description:

• Cowhide split leather with cottoncanvas lining

• Reinforcement on palm, thumband index

• Canvas back with leatherreinforcement

• Reinforced canvas cuffs• As per EN388

Application:

• Used in general handling, machine operator


Leather Hand Gloves

Description:

• Cowhide full grain leatherdriver glove, straightthumb with elasticizedback and self binding.

• Yellow color.• Thickness 0.9 mm – 1.1

mm.• General use mechanical protection gloves. • Provides great comfort ability and flexibility.• Size: 8, 9, 10, 11 or S, M, L, XL.• Confirms to EN388.

Application:

• Suitable for general industrial work, transportation trade, driving, operating machinery, material handling, shipping and handling of woods.


Leather Hand Gloves

Description:

• Heat resistant cowhide split

leather

• Hand with cotton fleece lining

• 14 cm cloth lined cuff

• American assembly

• Length: 35cm

• As per EN388, EN407, EN12477

Application:

• Used in for welding purpose application


Nitrile Supported Coated Gloves

Description:

• Nitrile dipped in 100%cotton jersey lining.

• Knitted wrist forprevention of dust

• Provides protection from snag, abrasion, cut and puncture,Suitable for demanding jobs.

• Size: 8-11

Application:

• Ideal for handling solvents, chemicals and lubricants.




S12

Hand Protection

Nitrile Supported Coated Gloves

Description:

• Nitrile Coating on Knit Fabric• Thinner coating on interlock

lining.• Has a good sense of touch

and dexterity.• Light Dipped Palm Coated knitted wrist in

Yellow color.• Size: 7-11• Confirms to EN388.

Application:

• Good for inspection and assembly using small parts.


Nitrile Coated Gloves

Description:

• Nitrile coating on palm and fingertips

• Shell knitted in 13 gauge machine.

• Good abrasion resistant. Excellent grip to feel.

• Glove could be treated to resist germs and odors.

• Size: 8-11.• Standard-EN-388

Application:

• Ideal in low lint protection.• Small parts handling and general purpose.


Disposable Gloves

Description:

• Powder free Nitrile.

• Size: 6,5/7,5/8,5/9,5

• Confirms to EN374-2

Application:

• Suitable for food

processing.


Description:

• Powder free chlorinated latex.• Size: 6/7-7/8-8/9• Confirms to EN374-2.

Application:

• Suitable for food processing.


Disposable Gloves



S13

Hand Protection

Description:

• Polyurethanecoating on palm and fingertips

• Shell knitted in 13 gauge machine.

• Good abrasionresistant.Excellent grip to feel.

• Increase breathability• Standard-EN-388

Application:

• Assembly of electronic component• Small parts handling and general purpose.


Pu Coated Gloves Nitrile Unsupported Dipped Gloves

Description:

• Nitrile with cotton flocklining

• Length: 33cm

• Thickness:0.40mm

• Resistance for abrasion

• Raised pattern texture on palm and fingers : Antislip

• Flocklining : Sweat absorption and comfort

• Not too reactive to heat

• As per EN388, EN374-3

Application:

• Chemical and Mechanical industry


Neoprene Gloves

Description:

• Neoprene with cotton

flocklining

• Length: 30cm

• Thickness: 0.75mm

• Good abrasion and heat

resistant.

• Standard-EN-388, EN374-3

Application:

• Excellent protection against chemicals, greases and hydrocarbon


Description:

• PVC on cotton jersey lining• Good abrasion resistance• Good isolating from the low

temperature• Resistance to the chemicals in

particular to the acids• As per EN388

Application:



Pvc Supported Dipped Gloves



S14

Hand Protection

Description:

• Latex with cotton flocklining• Length:30cm• Thickness: 0.38mm• As per EN388, EN374-3

Application:



Pvc Supported Dipped Gloves

Latex Coating Gloves

Description:

• 50% Cotton 50% Polyester

• Rough latex coating on palm and fingertips

• Guage 10

• As per En388

Application:

• Used in water application


Latex Supported Dipped Gloves

Description:

• Latex on cotton jersey lining

• Length: 30cm


• Good abrasion and tearing resistance.

Application:

• Farming, Gardening,

Construction, Handling of building materials.


Description:

• Palmless• Finger rubber gloves.

Application:

• Excellent Dexterity whilehandling the smallest objects

• Used in medical, laboratoriesand electronics industries.


Finger Gloves



S15

Hand Protection

Description:

• Made from speciallycompounded latex forcomplete insulation.

• Seamlessconstruction.

• Totally shock proof.• Tested by authorized

Government Test houses.• Confirms to IS-4770• Available for different Voltages between 11 to

33 KV.

Application:

• To prevent from electrical shock

Electrical Resistant Hand Gloves

Part No

Part No

Pkg. Qty

Pkg. Qty

04050047

04050049

24

24

Heat Resistant Kevlar Gloves

Description:

• Available in 2280 grams per dozen Pair.

• Available in 07 gauges. Heat resistant up to 300°C.

• Good thermal protection. Self extinguishing Para-amid fiber (flam dies out).

• E x c e l l e n t m e c h a n i c a l resistance.

• Size: 7,8,9,10,11.

Application:

• Good for use in Glass and rubber industries, automotive industry.


Latex Unsupported Dipped Gloves

Description:

• Latex with cotton flocklining double- dipped

• Length: 30cm


• Double dipped: Thicker glove, better abrasion resistance

• As per EN388, EN374-3

Application:

• Chemical and mechanical industry.




S16

Foot Protection

Description:

• Made of suitableformulated PVC material.

• Single molded,comfor tab le , be t te r

gripping.• Kick of spur for easy wear

& removal. • Acid proof, leak proof• Size- 12 and 14’’, other size also available.

Application:

• Suitable for building construction, mines, coalindustries, petro chemical industries.

Gum Boots

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04070136

04070137

04070138

04070139

04070140

04070141

04070142

04070143

04070144

04070145

10

10

10

10

10

10

10

10

10

10

Safety Shoes

Description:

• Longer life traditional Shoes.• Upper leather with steel toe cap.• Sole rubber is flexible, durable

light weight and shock absorbing.• Shoes are free from nails.• Size available: 6-10

Application:

• General purpose safety shoes.• Construction industry, food industry.

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04070003

04070004

04070005

04070006

04070007

04070008

04070009

20

20

20

20

20

20

20



S17

Foot Protection

Description:• Low ankle industrial safety

shoes.• Anti-rust D-rings.• Anti sweating polyester

vamp lining.• Available in Steel Toe as well as FRP toe• Confirms to EN 345.

Application:• Construction Industry, Transport logistics.

Safety Shoes

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04070024040700250407002604070027040700280407002904070030

20202020202020

Safety Shoes


shoe.• Padded leather and foam

tongue.• Impregnated non-woven

anti static insole.• Available in Steel Toe as well as FRP toe.• Confirms to EN 345


Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04070017040700180407001904070020040700210407002204070023

20202020202020

Safety Shoes

Description:• Low ankle industrial

safety shoe. Anti-rust nickel coated eyelets. Foam padded col lar lining. Impregnated non woven antistatic insole.

• Available in Steel Toe as well as FRP toe.• Confirms to EN 345.

Application:• Construction Industry, temporary work.

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04070031040700320407003304070034040700350407003604070037

20202020202020

Safety Shoes

Description:• High ankle industrial safety

shoe.• Anti-rust burr-free D-rings.• Padded collar with

cambraille lining.• Anti sweating polyester vamp lining.• Available in Steel Toe as well as FRP toe.• Confirms to EN 345.

Application:• Construction Industry, temporary work.

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04070038040700390407004004070041040700420407004304070044

20202020202020



S18

Safety Shoes

Description:

• Low ankle industrial safety shoes.

• Brea thab le cu t and perforation on upper.

• Slip on type and Velcro attached.

• Available in Steel Toe as well as FRP toe.

• Confirms to EN345.

Application:

• Construction Industry, Transport logistics.

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04070066

04070067

04070068

04070069

04070070

04070071

04070072

20

20

20

20

20

20

20

Description:• Leather upper stitched

with Kevlar thread.• Complete flame retardant

leather.• Available in Steel Toe as

well as FRP toe• Confirms to EN 345

Application:• General welding purpose high ankle

industrial safety shoe.

Safety Shoes

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04070052040700530407005404070055040700560407005704070058

20202020202020

Safety Shoes


shoe.• Padded foam tongue with

anti-rust D-ring.• Hi-Vi trimmings for night

work.• Confirms to EN345.

Application:• Ideal for security and patrol guards.

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04070059040700600407006104070062040700630407006404070065

20202020202020

Foot Protection



S19

Foot Protection

Description:• Low ankle industrial safety shoes.• Cowhide suede split leather. Windproof, waterproof and breathable fabric.• Upper: Suede split leather and nylon mesh(Breathable)• Lining : Absorbent polyamide• Footbed : Fixed-Polyamide on EVA• Outsole : Injected-Single density PU• Available in Steel Toe as well as FRP toe.• As per EN ISO 20345


Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04070073040700740407007504070076040700770407007804070079

20202020202020

Safety Shoes

Safety Shoes


shoes in PU• Superior comfort. Ful l

footpad for all day comfort • Anti slip sole design to give optimum surface contact• Availabel in steel toe


Part NoPart NoPart NoPart NoPart NoPart NoPart No

Pkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. Qty

04070201040701470407014804070149040701500407015104070152

20202020202020

Safety Shoes

Description:• Low ankle industrial

safety shoes in PU• Suede split leather• Lining: Absorbent polyamide• Footbed: Removable-Polyamide on EVA• Outsole: Injected-Single density PU• As per EN 345-1


Part NoPart NoPart NoPart NoPart NoPart NoPart No

Pkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. Qty

04070101040701020407010304070104040701050407010604070107

20202020202020



S20

Safety Vests

Part No

Part No

Pkg. Qty

Pkg. Qty

04060055

04060056

20

20

Description:

• Economy vest.• Fastening-Velcro• 110 gsm Fabric• 100% Polyester• 2'' Micro prismatic tape.Application:

• High visibility safety apparel.

Safety Vests

Part No

Part No

Pkg. Qty

Pkg. Qty

04060005

04060006

20

20

Description:

• Class 2 economy vest.• Fastening-Velcro• 50 mm wide grey tape

(2x1+2x1)• 25 wash cycle• Confirms to EN471

Application:


Safety Vests

Description:

• Fastening-Zipper

• Class 2 silver color-Parallel Assembly

• 75 wash cycle

• 50 mm wide micro prismatic tape(2x1+2x1)

• Confirms to EN471

Application:


• Colour-Orange


Safety Cross Belt

Description:

• Made of highly reflective

fluorescent tape.

• It is easy to wear & wash & is adjustable design suitable for every waist.

• 50 mm micro prismatic tape hi vi harness-75 wash cycle

• Confirms to EN471.

Application:

• High visibility cross belt.

• To be worn by workers working in the night.


Body Protection



S21

Safety Cross Belt

Description:• Made of highly reflective

fluorescent tape.• 2'' Micro prismatic tape

Application:• High visibility cross belt.• To be worn by workers working in the night.


Light Work Wear

Description:• 100% cotton, 210gsm,

regular light weight coverall. • Concealed metal zipper on

front. • Chest pockets on both

sides with metal zipper closure.

• Side elasticized waistband. • Sleeve hem with snap button adjuster. • Two patch pockets at waist. • Action back pleats for ease of movements. • Two back patch pockets and a tool pocket. • High on comfort.• Size: XS-XXXL

Application:• Ideal for light weight industrial works.

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04060023

04060024

04060024

04060024

10

10

10

10

Heavy Work Wear

Description:

• 330 gsm short jacket with zipper concealed by flap.

• Two chest pockets with flap with Velcro.

• Two diagonal patch pockets on front.

• Cuff at sleeve hem with snap button adjuster.

• Mobile pocket provided on chest pocket.

• Pocket on sleeve with partition.

• High on comfort and durability.

• Size: XS-XXXL

• Color: Grey

• Available in: 100% cotton, 65/35 PC and 65/35 CP.

Application:

• Ideal for heavy weight industrial application.

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04060011

04060012

04060013

04060014

10

10

10

10

Work Wear

Body Protection



S22

Heavy Work Wear

Description:

• 330 gsm, trouser with pleats. • Two side pockets. • Patch hip pockets and rule

pocket. • Patch pocket above knee with

harmonica pleat. • Two patch knee pockets with

opening below. • Loop with D-ring below waistband. • High on comfort and durability. • Size : XS-XXXL • Color : Grey

Application:

• Ideal for heavy weight industrial application.

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04060015

04060016

04060017

04060018

10

10

10

10

Heavy Work Wear

Description:

• Nomex Coverall.• Provides permanent flame

resistance.• Two sides pockets, zip

opening.• Extremely durable and resist

abrasion, tears andchemicals.

• Forms tough when exposed to flame, and stays flexible until it cools.

• High on comfort due to light weight and

durable.• Size-XS-XXXL• Color-Navy Blue.

Application:

• Provides permanent flame resistance that

won't wash out or wear away. • Maintains a stable, barrier between the

fire/arc and skin, protecting the wearer from

direct exposure.• Use in laboratories, field tests and real-life

flash fire and electric arc situation.

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04060037

04060038

04060039

04060040

10

10

10

10

Work Wear



S23

Shoe Cover


Leather Apron

Description:• It is made from four pieces of

side split leather.

Application:• Split aprons with loop around

the neck and leather belts in the back.

• Protect welders from heat, spatters, sparks etc.

Pvc Apron

Description:• PVC apron.

Application:• Ideal for Food and Chemical

Processing.



Lab Coat

Description:• 100 % Cotton canvas 180

g/m2• Short smock. Tightening• Slimfit waist adjustable with

elastic cord on back• Sleeves: Long 1 pocket on the

left. Pockets : 3

Application:

• Ideal for Medicals and Industry.

Disposable Wear

Description:• Overalls with elasticized hood.

Non woven.• Fastening: Zip under flap (top &

bottom opening).• Elasticized waist & ankles.• Knitted wrist.• Individual pack.

Application:• Food processing, hygiene, health industry.

10101010

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

04060019040600200406002104060022

Description:• Skid resistant.• Non woven polypropylene.

Application:• Hospitals, resistant to skid surface.

Bouffant Mob Cap

Description:• Non woven polypropylene.• Elasticated border.• 53 cm in diameter.• Dispenser box of 100 pieces.

Application:• Air permeable and provide good bacteria

filtration efficiency.• Large demand in hospitals.



Work Wear



S24

Work Wear

Tyvek Coverall


Pvc Apron With Sleeve

Description:

• Size24 X 48

• PVC apron made from PVC with heat

• Sealed and reinforced edges with full length sleeves, these aprons feature tie-type neck and waist straps

• Advantages: Quick fit back with tying strings

• Bounded collar resists sagging. These Apron resist acids, caustics, and chemicals, water. Oils, grease and gasoline

• Light weight. Usage Area: General purpose and chemical handling also used to handle oil, grease and gasoline

Application:

• Ideal for Chemicals and paint industry


Description:• Proprietary fabric technology

only available from dupont.• Soft, lightweight and breathable• Antistatic, non-l int ing and

durable• Protection against a variety of

liquid and solid• Chemica ls , par t ic les and

hazardous fibres such as asbestos and fiberglass, lead, paint and aerosols.

• Available in white and safety orange Advantages

• 3-Piece hood• Elasticated facial opening• External stitched seams(3-Thread over lock)• Elasticated waist• Elasticated cuffs and ankles• Tyvek Zipper• Zipper Flap• Additional gusset fabric

Application:• Ideal for Chemical, electronic and paint

industry.

Cotton Apron

Description:• Black Bib Apron with Pocket made of Polyester cotton

Application:• Ideal for food processing and Industry.




S25

Disposable Suit

Description:

• Smock.• Non woven propylene.• Fastening: 4 press studs. Shirt

collar.• Made-up sleeves.• 2 patched low pockets.

Application:

• Community health industry.


Lanyard

Description:

• Safety lanyard• Anchorage line 30 mtr.

Long rope with one side hook and other side knot

• Confirms to EN 354:2002.

Application:

• Fall Protection.


Energy Absorber

Description:

• Webbing:45mm• Reduce shock 6KN

from a height of 4 M.• Confirms to EN 355:2002.

Application:

• The forces that are felt on the body in the event of fall have been reduced to minimum, hence saving from any internal damage of body.


Self Retracting Lifeline

Description:

• Robust & Durable Plastic Casing with 5 Mtrs Galvanized Steel.

• Wire Rope Dia: 4.5 mm

• Fall Arrest Force Up to: 6 Kn

• Confirms to EN 360:2002.

Application:

• Immed ia te l y a r res t i ng a fa l l and minimizing the impact of the force on the body of the user.


Work Wear

Fall Protection



S26

Steel Scaffold Hook

Description:

• Material/Composition :Forged Alloy Steel.

• Minimum Opening :50mm

• Minimum Breaking Strength : 23 KN• Confirms to EN 362:2004.

Application:



Tripod Combination

Description:

• Winch/SRL/Tripod

Combination.

• 7 foot aluminum tripod.

• Leg mount pulley.

• Tripod mounting base.

Application:

• Lowering people and supplies into confined spaces.


Karabiner

Description:

• Steel Screw-lockingKarabiner.

• Material/Composition:Alloy Steel.

• Minimum Opening: 16mm• Minimum Breaking Strength: 25 KN

Application:



Half Mask Respirator

Description:

• Light in weight.

• Thermo plastic half mask (TPE)

• Textile strap

• Intended for 2 filtering cartridge

Application :

• Chemical handling, Spraying, Mining, High dust exposure, Air line System where high level protection are required.


Respirators

Fall Protection



S27

Respirators

Cotton Matty Dust Mask

Description:

• Nose mask without valve

• Inner layer - non wovenf i l te r, m idd le -3mm foam.

Application:

• Textile industry, craft work, iron and steel industry, mining, underground civi l engineering, woodworking, hospital, laboratory, and disease control.


Cartridges

Description:

• Gas Type : Organic Vapor

• Product Weight : 0.17 kg

Application:

• Air purification.


Nose Mask

Description:

• Comfortable protection against dust, mist, fumes and nuisance odours

• Flat folded dust respirator with high filteringefficiency

• Low breathing resistance• Comfortable• BIS Certified

Application:

• Suitable to handling of stone, cleaning.


Nose Mask

Description:

• Re l iab le p ro tec t ion against dust, mist, fumes and nuisance odours

• Cup shapes P1 respirator• Protection against fine

dust and particulates• Easy to fit

Application:

• Textile industry, craft work, iron and steel industry, mining, underground civi l engineering, woodworking, hospital, laboratory, and disease control.




S28

Nose Mask

Description:• Cup shapes P1 respirator• Lightweight• Activated charcoal layer protect from organic vapours and nuisance odors.

Application:• Chemical industry, pharmaceutics industry, farming, automobile, Construction.


Water Co2 Type Fire Extinguisher

Description:Water Co2 type 9 liters. Capacity Fire Extinguisher, complete with gunmetal cap & with nozzle, bracket and fully charged Co2 Gas Cartridge. Extinguisher as per, IS: 940.Bearing ISI MARKED With brass siphon tube, body phosphate and powder coated internally as well as externally for protection against corrosion with Gas Cartridge as per IS: 4947.With ISI MARK Body fabricated from 1.25 mm sheets (IS: 513). Gunmetal cap as per IS: 318. Body tested to 30 kg/cm2 for 2 min. Weight of extinguisher 14.6kgs.

Application:Water Type fire extinguisher for use against class 'A' fires involving carbonaceous material such as Wood, Paper, Plastic, Cloth & textile etc. Designed and constructed in accordance with IS: 940. Water knocks down fire rapidly by striking instantly cooling & penetrating the most deep seated "A" Class Fires.


Stored Pressure Water Co2

Description:

Stored Pressure Water type Fire Extinguisher, 9 Liter’s capacity Fire Extinguishers pressurized by Nitrogen Gas fitted with CE Marked brass squeeze grip valve, with special future of safety release valve and NRV. With plastic siphon tube and discharge hose with Nozzle and Pressure Gauge to indicate pressure inside. Extinguisher is Phosphate and Epoxy powder coated, as per IS: 5 Shade No. 538 complete with wall brackets. The Extinguisher is manufactured as per IS 6234 bearing ISI MARK.

Application:

Water Type fire extinguisher for use against class 'A' fires involving carbonaceous material such as Wood, Paper, Plastic, Cloth & textile etc. Designed and constructed in accordance with IS: 940. Water knocks down fire rapidly by striking instantly cooling & penetrating the most deep seated "A" Class Fires.


Respirators

Fire Detection And Prevention



S29

Fire Detection And Prevention

Water Co2 Type Fire Extinguisher

Description:

Water Co2 50 liters. Capacity Fire

Extinguisher Phosphate and

Epoxy powder coated internally

and externally to give best

protection against corrosion with

gunmetal cap. Discharge hose &

nozzle. Mounted on rubber tires

wheel complete with charge Co2 Gas

Cartridge. As per IS 13385.With ISI MARK.

Application:

Water Type fire extinguisher for use against

class 'A' fires involving carbonaceous material

such as Wood, Paper, Plastic, Cloth & textile

etc. Designed and constructed in accordance

with IS: 940. Water knocks down fire rapidly by

striking instantly cooling & penetrating the most

deep seated "A" Class Fires.

Pkg. Qty 1Part No 04040011

Dcp Type Fire Extinguisher

Description:

Dry Chemical Powder type 5

kgs. capacity Fire Extinguisher,

complete with gunmetal cap,

bracket and initial charge of 5 kgs.

Sodium – bi – carbonate base Dry

Chemical Powder and fully charged

120 gms. Co2 Gas Cartridge fitted with 55 cms

long discharge hose with open type nozzle,

Bearing IS I Mark IS: 2171. Dry Powder Bearing

ISI Mark, IS: 4308. Gas Cartridge Bearing ISI

Mark. IS: 4947, Phosphate and Epoxy powder

coated MS body fabricated from 1.6 mm sheets

as per IS: 513. Gunmetal cap as per IS: 318.

MS Siphon tube as per IS: 3601. Filled weight of

extinguisher. 10.5 kgs. Tested to 30 kgf/cm2 for

2 minutes.

Application:

Dry chemical powder extinguishers are suitable

for B & C Class Fires. For fires, involving oils,

solvents, paints, varnishes, electrical wiring &

live machinery. Dry Chemical Powder type fire

extinguishers are unique in design, efficient in

performance & very swift in action.


DCP TYPE



S30

DCP TYPE


Description:


kgs. capacity Fire Extinguisher,

Phosphate and Epoxy powder

coated Bearing ISI Mark IS: 10658

fitted with gunmetal cap, safety

valve, hose with ABS squeeze grip

nozzle, mounted on rubber tired wheels, initial

charge of 25 kgs. Sodium-bi-carbonate base

Dry Chemical Powder & fully charged Co2

cylinder. Dry Powder as per IS: 4308. Bearing

ISI Mark: Co2 Cylinder approved by Explosives

Dept. Extinguisher body as per IS: 2062.

Gunmetal cap as per IS: 318. Valve as per IS

3224 Bearing ISI Marked. Siphon tube as per

IS: 1239. Tested to 30 kgf/cm2 for 2 minutes

Application:









Description:


kgs capacity Fire Extinguisher,

complete of 10 kgs. Sodium-bi-

carbonate base Dry Chemical

Powder and fully charged 180 gms.

Co2 Gas Cartridge, fitted with 76 cms.

Extinguisher Bearing ISI Mark IS: 2171. Dry

Powder Bearing ISI Mark IS: 4308. Gas

Cartridge as per IS: 4947. Bearing ISI Marked

Phosphate and Epoxy powder coated Body

fabricated from 2 mm MS sheet as per IS: 513.

Gunmetal cap. MS siphon tube as per IS: 3601

filled weight of extinguisher 18.6 kgs Tested to

30 kgf/cm2 for 2 minute.

Application:










S31


Description:

Dry Chemical Powder type 25 kgs. capacity Fire Extinguisher, Phosphate and Epoxy powder coated Bearing ISI Mark IS: 10658 fitted with gunmetal cap, safety valve, hose with ABS squeeze grip nozzle, mounted on rubber tired wheels, initial charge of 25 kgs. Sodium – bi – carbonate base Dry Chemical Powder & fully charged Co2 cylinder. Dry Powder as per IS: 4308. Bearing ISI Mark: Co2 Cylinder approved by Explosives Dept. Extinguisher body as per IS: 2062. Gunmetal cap as per IS: 318. Valve as per IS 3224 Bearing ISI Marked. Siphon tube as per IS: 1239. Tested to 30 kgf/cm2 for 2 minutes.

Application:

Dry chemical powder extinguishers are suitable for B & C Class Fires. For fires, involving oils, solvents, paints, varnishes, electrical wiring & live machinery. Dry Chemical Powder type fire extinguishers are unique in design, efficient in performance & very swift in action.



Description:

Dry Chemical Powder type 50 kgs. capacity Fire Extinguisher, Phosphate and Epoxy powder coated Bearing ISI Mark IS: 10658 fitted with gunmetal cap, safety valve, hose with ABS squeeze grip nozzle, mounted on rubber tired wheels, initial charge of 25 kgs. Sodium-bi-carbonate base Dry Chemical Powder & fully charged Co2 cylinder. Dry Powder as per IS: 4308. Bearing ISI Mark: Co2 Cylinder approved by Explosives Dept. Extinguisher body as per IS: 2062. Gunmetal cap as per IS: 318. Valve as per IS 3224 Bearing ISI Marked. Siphon tube as per IS: 1239. Tested to 30 kgf/cm2 for 2 minutes.

Application:

Dry chemical powder extinguishers are suitable for B & C Class Fires. For fires, involving oils, solvents, paints, varnishes, electrical wiring & live machinery. Dry Chemical Powder type fire extinguishers are unique in design, efficient in performance & very swift in action.


DCP TYPE



S32

Co2 Type Fire Extinguisher

Description:

Co2 type 2 kgs. capacity Fire

Extinguisher, assembled from

brand new Explosives approved

cylinders, complete with screw-

down/Squeeze Grip type valve,

internal discharge tube, horn &

suspension bracket. Bearing ISI Mark

IS: 2878. Co2 Cylinder as per IS: 7285

CCE approved ‘ISI’ Valve as per IS: 3224.

Co2 Gas as per IS: 307. Internal discharge tube

IS: 738. Discharge duration, 8-18 secs. Filled weight of extinguisher, 8.20 kgs.

Tested to 250 kgf/cm2.

Application:

The quick and efficient flame knockdown

property of CO2 gas makes it ideal for tackling

fire involving flammable liquid for instance oil,

paints, varnish, solvents and even industrial

gases. Inert CO2 gas rapidly starves the fire of

oxygen, extinguishing it within second by

squeezing the lever. Since it leaves no residue

after use, it is ideal for fire involving sensitive

electrical equipment.Used for 'A' 'B' 'C' Class Fire


Description:

Co2 type 3. Kgs. capacity Fire



cylinders, complete with screw-down/

Squeeze Grip type valve, internal

discharge tube, horn & suspension

bracket. Bearing ISI Mark IS: 2878. Co2

Cylinder as per IS: 7285 CCE approved

‘ISI’ Valve as per IS: 3224. Co2 Gas as

per IS: 307. Internal discharge tube IS: 738.

Discharge duration, 10-20 secs. Filled weight of

extinguisher, 12.90 kgs. Tested to 250 kgf/cm2.

Application:











Co2Fire Extinguisher



S33


Description:

Co2 type 4.5 kgs. capacity Fire



cylinders, complete with screw-down/

Squeeze Grip type valve, internal

discharge tube, one meter high

pressure rayon braided hose,

discharge, horn, Bearing ISI Mark IS:

2878. Co2 Cylinder as per IS: 7285 CCE

approved ‘ISI’ Valve as per IS: 3224. Co2 Gas

as per IS: 307. Internal discharge tube IS: 738.

Discharge duration, 10-24 secs. Filled weight of

extinguisher, 17 kgs. Tested to 250kgf/cm2.

Application:




paints, varnish, solvents and even industrial gases. Inert CO2 gas rapidly starves the fire of






Description:




cylinders, complete with screw-down

type valve, internal discharge tube,

one meter high pressure rayon braided

hose, discharge, horn, mounted on

rubber tired wheels. Bearing ISI Mark


CCE approved ‘ISI’ Valve as per IS: 3224. Co2

Gas as per IS: 307. Internal discharge tube IS:

738. Discharge duration, 10-24 secs. Filled

weight of extinguisher, 25 kgs. Tested to250

kgf/cm2.

Application:















S34


Description:

Co2 type 9 kgs. capacity Fire





one meter high pressure rayon braided








kgf/cm2.

Application:












Description:






five meter high pressure rayon braided








kgf/cm2.

Application:














S35

ABC Stored Pressure TYPE

ABC Type Fire Extinguisher

Description:

ABC type Stored Pressure 1 kgs.

capacity Fire Extinguisher, fabricated

from EDD CR Sheet, fitted with CE

Marked brass forged squeeze grip

valve with special featured safety

release valve and Non Return Valve assembly

incorporated with pressure gauge, initial

charge of 1kg. ABC Powder and pressurized

with nitrogen gas. M.S. Body as per IS : 513

Forged brass valve as per IS: 6912. Filled

weight of extinguisher, 4.050 kgs Tested to 30

kgf/cm2. Bearing ISI Mark IS: 13849.

Application:

ABC store pressure fire extinguisher is suitable

for A Class, general paper, wood, cloth & B

Class inflammable liquids like kerosene, paints,

petrol etc. & for C class of fire gases in the

compressed form, electrical and electronic

equipment like motor, LPG, Acetylene etc, no

need of hard efforts in using this extinguisher,

just pick the extinguisher & you can fight any

type of fire. Suitable for A B & C Class of Fire.


Description:

ABC type Stored Pressure 500Grams.







charge of 500grm. ABC Powder and

pressurized with nitrogen gas. M.S. Body as

per IS: 513 Forged brass valve as per IS: 6912.

Filled weight of extinguisher, 4.050 kgs Tested

to30 kgf/cm2. Bearing ISI Mark IS: 13849.

Application:














S36


Description:








charge of 5 kg. ABC Powder and pressurized





Application:









type of fire. Suitable for A B & C Class of Fire



Description:













Application:














S37

Mechanical Foam TypeABC Type Fire Extinguisher

Description:













Application:









type of fire. Suitable for A B & C Class of Fire


Mechanical Foam Type Fire Extinguisher

Description:

Mechanical Foam type 9 l i t e r s c a p a c i t y F i r e Extinguisher, complete with gunmetal cap. Bracket, fitted with flexible hose terminating in a foam branch pipe, initial charge of AFFF concentrate and fully charged Co2 Gas Cartridge 60 Gms. Bearing ISI Mark. IS: 4947.With 540 ml AFFF 6% charge Bearing ISI Mark. Extinguisher Bearing ISI Mark. IS: 10204. With Powder coated internally & Externally towards protection against corrosion. Body fabricated from 1.25 mm sheets (IS: 513). Gunmetal cap as IS: 318. Body tested to 30 kg/cm2 for 2 min. Weight of extinguisher 14.6kgs.

Application:

Foam Type fire extinguisher is designed to be most effective on class ' B ' fires, although they can also be used in class ' A ' fires. Foam is a powerful flame knockdown for spill fires involving flammable and volatile liquid like petrol, paints and alcohols. In use these extinguishers form a thick blanket of foam over the burning surface, effectively cutting off the oxygen supply, thereby smothering the fire and preventing reigniting.





S38


Description:

Store Pressure Mechanical

Foam type Fire Extinguisher,

9 Liter’s capacity, fitted with

CE Marked brass squeeze grip

valve, with special future of safety

release valve and NRV, M S Neck

ring Plastic Siphon tube and AFFF liquid.

Extinguisher is Phosphate and epoxy powder

coated as per IS: 5 Shade No. 538 complete

with wall brackets. The Extinguisher is

manufactured as per IS: 15397.

Application:

Foam Type fire extinguisher is designed to be

most effective on class ' B ' fires, although they

can also be used in class ' A ' fires. Foam is a

powerful flame knockdown for spill fires

involving flammable and volatile liquid like

petrol, paints and alcohols. In use these

extinguishers form a thick blanket of foam over

the burning surface, effectively cutting off the

oxygen supply, thereby smothering the fire and

preventing reigniting.


Description:

Mechanical Foam type 50 l i t e r s . C a p a c i t y F i r e Extinguisher, fitted with gunmetal cap, discharge hose with foam making branch pipe, mounted on rubber tired wheels, complete with initial charge of AFFF concentrate (6% 3 Liters.) and fully charged Gas Cartridge 300 Grams. Charged weight of the extinguisher 100 kgs approximately. Suitable for class ‘B’ type fire. INTERNAL GAS CARTRIDGE TYPE. Bearing ISI Mark. IS: 13386-1992.

Application:

Foam Type fire extinguisher is designed to be most effective on class ' B ' fires, although they can also be used in class ' A ' fires. Foam is a powerful flame knockdown for spill fires involving flammable and volatile liquid like petrol, paints and alcohols. In use these extinguishers form a thick blanket of foam over the burning surface, effectively cutting off the oxygen supply, thereby smothering the fire and preventing reigniting.



Mechanical Foam Type



S39

Printer & Consumables

Label and area statusCurrent font size and rotationAmount of material remainingRemaining battery charge

Built-in wizards and other features for easy label creation

Built-in wizards for electrical, data comm, and general id labelsBar code symbologies, serialization and over 500 graphicsTime/date stampStore, retrieve and delete label files – save more than 100,000 label files!Batch label printing or print multiple copies of one labelCreate labels with multiple areasPrint multiple copies of your label file

Wide variety of label materials

Choose from 30 different materials types, including Perma Sleeve™ heat-shrink sleeves, self-laminating labels, raised panel labels and morePrints on over 400 continuous and die-cut label materialsPrints labels up to 2” wide on continuous label materialsEasy to load supplies

Application:

Electrical, Contractors, Maintenance Repair, General Identification, Aerospace, Defense, Mass Transit (ADM), Electronics, SafetyTool Cribs, Warehousing and Equipment Rental, Lean and Compliance, Transportation EquipmentUtilities, Voice and Data Communications, I.T. and Networks

Label Printer

Description:

With more than 400 different label options, the Portable Label Printer is most versatile portable printer. This easy-to-use labeler can help you cut material waste, save label making time, and print crisp labels more efficiently than ever before.The labeler can print on more than 30 types of label materials - including Perma Sleeve™ wire markers, indoor/outdoor vinyl, polyester die-cut labels, flag labels, self-laminating wire markers, raised panel labels, and more. Whether you need 1/4" self-laminating wire marker labels or 2" wide vinyl pipe marker labels, this portable label printer can do it all

Features of the Label Printer

One smart, Fast Printer

Portable, industrial, rugged 300 dpi thermal transfer printer with large handlePrints 1.5” per secondQWERTY style keypad layoutBuilt in touch cell in labels and ribbons allows printer to automatically format labelStand alone and PC compatibleUse with Brady Label Mark label design softwareUse with Brady Mark Ware Express sign and label design softwareSleep mode when not in useRechargeable battery. AC power/battery charger available

Large, graphical, full color display with on screen indicators

Installed label partLabel size and color Part No Pkg. Qty04110--- 1



S40

MiniMark™ Industrial Label Printer

MiniMark industrial label printer is an affordable sign and label making solut ion that is compact, fast and incredibly versatile. At only 4.85 lbs, the printer is highly portable and can be easily attached to a PC.The MiniMark printer is ideal for creating signs, pipe markers, equipment labels, panel identification, and more. It can print on both die-cut and continuous tape, and features a drop-in load dock that makes it easy to load new tape. The MiniMark printer can print labels as wide as 4 inches at a speed of up to 4 inches per second - the fastest print speed of any other models in this range. It ships with MarkWare™ Express software, a USB cable and a Quick Start Guide.

Features of the MiniMarkTM Industrial Label PrinterEasy Loading - Supplies are easy to loadFast - Prints up to three inches per secondCompact - Doesn't take up a lot of space in work areasLightweight - At 4.85lbs, this printer is highly portableUL-Approved Automatic Cutter - Built in auto cutter is UL-Approved for safe operation and helps to minimize material waste.WEEE-RoHS Compliant - The printer and its printing materials are WEEE-RoHS Compliant.Status LED - Instant display of printer status with "Ready" and "Power" indicator.

USB/Parallel/Serial Connection - Dual connectivity, Serial or USB. “Plug and Play” using USB, automatically recognizes by your PC makes the MiniMark™ easy to use.Ease-of-Use - Printing signs and labels is fast and easy with Brady Software

MarkWare Facility Identification Software (sold separately) takes customization one step further with ready-to-use templates, symbols and pictogram. Bar coding and importing graphics and data cannot get any easier

Continuous Tapes & Die Cut Labels - Choose from 7 types of printing materials available in a variety of sizes, formats and up to 12 colors!

Application:

Sign, General ID, Procedures, Equipment ID, Racks & Shelving, Asset Management, Pipe Markers, Panel ID And much, much more!





S41


Adjustable Gate Valve Lockout

Description:

Our versatile, economical lockout adjusts to fit 1" to 6 1/2" diameter valve handles, replacing 3 conventional gate valve lockouts. Durable polypropylene is resistant to extreme temperature changes from -13Â°F to 194Â°F. Device is compact for easy carrying and storage.

Specification:

Color : RedMaterial Description: Durable PolypropyleneValve Handle Diameter: 1" to 6 1/2"

Part No Pkg. Qty04110--- 1

Powermark® & Value PLUS Combo Package

Description

C o m b o p a c k a g e includes Power Mark® Sign and Label Maker, BLS1255 and the Value PLUS package for Power Mark® - Extended Warranty, 1 roll of white Power Mark vinyl tape, 1 roll of black Power Mark ribbon and Mark Ware™ Facility Identification software

Features

Prints signs and labels 4" to 10" wideOperates as a standalone unitPre-programmed with built-in applicationsHundreds of resident pictograms, and bar codes, plus 11 operating languagesProduce rigid signs & labels using optional laminatorPC connection for printing from Mark ware Facility Identification SoftwareDurable output: excellent water, UV, abrasion and chemical resistance; aggressive adhesive sticks to a wide variety of surfacesWide range of label colors, materials and sizesMix and match tapes and ribbons

Application:

Barcode Labeling, Facility, Safety and Maintenance Identification, Laboratory Identification, Lean/5S Labeling, Lockout Tagout Labeling, PanelIdentification, Pipe and Valve Marking, Product Identification, Security Identification


Cable

Description:10' Cable for use with Economy Cable Lockout

Specification:Size - 10’Color - RedType of Devices - Disconnect Handle Lockouts


Lockout Tagout



S42

Cable Attachment w/ 8' Nylon Cable

Description:Use the cable attachment to lock out gate valves. Cable attachment offers choice of 1/8"nonconductive nylon cable

Specification:Color : RedMaterial Description : Industrial-Grade Steel and Nylon


Combination Lockout Duffel With Brady Safety Padlocks & Tags

Description:

Our combination lockout

duffel gives you everything

you need to lockout the most

common mechanical and

electrical control points. Extra

electrical lockout devices are included. Kit

components include: 1-Mini Cable Lockout

(50940), 1-Large Universal Valve Lockout w/

Blocking Arm (50899 and 65403), 1-120V

Snap-On Breaker Lockout (65387), 1-

120/277V Clamp-On Breaker Lockout (65396),

1-480/600V Clamp-On Breaker Lockout

(65397), 1-Universal Multi-Pole Breaker

Lockout (66321), 1-Oversized Breaker Lockout

(65329), 1-Cleat for 120/277V Clamp-On

Lockout (65404), 1-Cleat for 480/600V Clamp-

On Lockout (65406), 1-3-In-1 Plug Lockout

(PLO23), 1-Wall Switch Lockout (65392), 1- 1"-

6 1/2" Adjustable Gate Valve Lockout (64057),

1- 1"-2 1/2" Gate Valve Lockout (65560), 1-

1/4"-1" Ball Valve Lockout (65666), 1-Lockout

Belt Pouch (51172), 1-Lockout Duffel Bag

(99162), 2-Brady Safety Padlocks (99552) and

2-Lockout Tags (65520)

Part No Pkg. Qty 1

Large Universal Valve Lockout w/ Nylon Cable & Blocking Arm

DescriptionVersatile, rugged, easy to use and lightweight, our universal valve lockouts are effective for a variety types of standard valves. Can also be used to lock out large levers, T-handles and hard-to-secure mechanical devices. New open-ended clamp fits over closed rings and wide handles. Made of industrial-grade steel and nylon for extra impact and chemical resistance. Cable attachment is 1/8" nonconductive nylon cable. Additional base clamping units, blocking arms and cable attachments sold separately.

Specification:Size: Large Device w/ 8' CableMax Handle Thickness : .04" to 1.1"Color : RedMaterial Description: Industrial-Grade Steel and Nylon

Part No Pkg. Qty 1

Lockout Tagout

04110017

04110---



S43

Brady Plug Lockout – Small

Description:Avoid electrical accidents by applying lockouts to prevent plugs from being inserted into a wall outlet. Use when plug will not remain under the exclusive control of the person performing service or maintenance. Device is made of rugged polypropylene and is for use with 110V electrical plugs. Danger message printed on device to alert workers of lockout in progress.

Specification :Size : 2" H x 2" D x 3 1/2" W w/ 1/2" Diameter Hole For CableColor : RedMaterial Description : PolypropyleneType of Device : Electrical Plug Lockout


Pneumatic Quick-Disconnect Lockout

Description:Our pneumatic quick-disconnect lockout is applied to the male fitting, isolating equipment from all compressed airsources. Device accommodates the majority of 1/4", 3/8" and 1/2" male fittings. Hole in center of device allows for permanent storage on an air hose and a loop on the side can be used to hang the hose and lockout device. Lockout accepts padlocks with 1/4" or 9/32" shackles and is sold 1 per package.

Specification:Color: RedType of Device: Air Line and Pneumatic Lockout


Plug Valve Lockout

Description:Brady's Plug Valve Lockout is the first lockout device to easily and effectively secure a manually-actuated plug valve with a stem diameter up to 7/8". The base of the lockout device can remain in place once applied, and generally does not interfere with valve activation by wrench or removable handle. The device is compact in size, yet highly-visible and easy to use and made of durable polypropylene.

Specification:Size: 0.375" - 0.875" Valve DiameterColor : RedMaterial Description: Durable Polypropylene


Small Prinzing Ball Valve Lockout

Description:

Patented design and ultra-tuff polypropylene makes these ball valve lockouts the best your money can buy. Small lockout locks out pipes 1/2" to 2 1/2" in diameter. The small lockout can also be used to lock valves OPEN on pipes from 1/2" to 1 1/4" in diameter.

Specification:

Color : RedMaterial Description: PolypropyleneOutside Pipe Diameter : 1/2" - 2 1/2"


Lockout Tagout



S44

Original Cable Lockout-Red

Description:Brady's original, patented cable lockout device is perfect for your difficult lockout situations such as large gate valves or oversized devices. Simply squeeze device to tighten cable, insert your padlock to secure the handle and you're done! Body is made of impact modified nylon, available in red, blue, yellow or green. Standard lockout device comes with 6' x 1/8" diameter cable. Additional 6', 8' and 10' cable are sold separately.

Specification:MATERIAL: Impact Modified NylonSIZE: 6' x 1/8" Diameter CableType of Device: Disconnect Handle Lockouts


Red Lockout Hasps

Description:

Our lockout hasps are the answer to your safety concerns during group lockout situations. Hasps are constructed of vinyl-coated high tensile steel and are plated to resist rust. Lock holes are 3/8" diameter to accommodate most standard lock shackles.

Specification:

MATERIAL: Vinyl-Coated High Tensile SteelSIZE: 1 1/2" Diameter JawsType of Device: Padlock Hasp


Nylon Lockout Hasp

Description:

Nonconductive lockout hasps

have exceptional electrical

insulating characteristics and

are made of orange nylon

material. Each hasp can

withstand up to 1,000 lbs, yet

weighs only 1 oz. Hasps accommodate up to 6

locks and have 3/8" diameter lock holes.

Product dimension is 7"H x 1 3/4"W. Hasps are

sold 1 per package.

Specification:

MATERIAL: NylonSIZE: 7" H x 1 3/4" WType of Device: Padlock Hasp


Lockout Tagout



S45

Brady Steel Padlocks

Description:

Brady Steel Padlocks are made

from reinforced laminated steel

to withstand severe physical

abuse and come wi th a

hardened steel shackle making them extremely

difficult to cut. Body plates are individually

coated for superior rust protection. 5-pin

cylinder offers more unique key cuts and better

tamper resistance than conventional 4-pin

locks. Lock body size is 1 1/3"H x 1 9/16"W x

7/8"D. Colored bumpers can be used for

identification and protection and custom

stamping is available. Padlocks are available

keyed different. Custom keying and charting is

available. Lock labels sold separately.

Specification:

Material : Reinforced Laminated SteelLock Body Size : 1 1/3" H x 1 9/16" W x 7/8"DColor : RedKey Style : Keyed DifferentShackle Clearance : 2"Shackle Diameter : 17/34"Special Features : Most rugged


Aluminum Pre-Labelled Hasps

Description:

Make sure your workers are

safe by supplying labeled

lockout hasps for all of their

group lockout procedures.Constructed from tough 5052

anodized aluminum alloy with tamper proof

locking tabs, they are impossible to remove

while locks are still in place. Front and back of

hasp contains write on surface that accepts

pencil, pen or permanent marker (87052). Pen

and pencil markings can be easily erased

allowing for repeated use. Each hasp has 6 lock

holes which are 5/16" diameter

Specification:

Material : Tough 5052 Anodized Aluminum AlloyLegend : DANGER DO NOT OPERATE...ETCBack Legend : DANGER This energy source

has be LOCKED OUT...ETCDimensions : 7 1/14" H x 3" W x 3/16" DColor : RedLock Holes : 6

Part No Pkg. Qty 1

Lockout Tagout

04110---



S46

Lockout Tagout

Miniature Circuit Breaker Lockouts - Pin In Standard

Description:

Miniature BreakerLockouts require NOTOOLS to install! Standard "Pin" style lockouts install easily with the aid of a push button. Lockouts are available for single and multi-pole breakers. Recommended to lock with Brady Safety padlocks (Ex: 99552 - Red) or other lightweight padlock with shackle diameter up to 9/32". Lockouts are made of glass-filled nylon.

Specification:

Material : Glass-Filled NylonColor : RedType of Device : Circuit Breaker LockoutQTY/UOM : 6/Package

Part No Pkg. Qty 1

Description:Miniature BreakerLockouts require NOTOOLS to install! Standard "Pin" style lockouts install easily with the aid of a push button. "Tie Bar" style lockouts use a convenient thumb wheel. Lockouts are available for single and multi-pole breakers. 4 different lockout types are available: POS (Pin Out Standard), PIS (Pin In Standard), POW (Pin Out Wide) and TBLO (Tie Bar Lockout). All are recommended to lock with Brady Safety padlocks (Ex: 99552 - Red) or other lightweight padlock with shackle diameter up to 9/32". Lockouts are made of glass-filled nylon and are sold individually or 6 per package.

Specification:Material : Glass-Filled NylonColor : RedType of Device : Circuit Breaker LockoutQTY/UOM : 6/Package

Miniature Circuit Breaker Lockouts - Pin In Standard


Description:

Miniature Breaker Lockouts require NO TOOLS to install! "Tie Bar" style lockouts use a convenient thumb wheel. Lockouts are available for single and multi-pole breakers. Recommended to lock with Brady Safety padlocks (Ex: 99552 - Red) or other lightweight padlock with shackle diameter up to 9/32". Lockouts are made of glass-filled nylon.

Specification:

Material : Glass-Filled NylonColor : RedType of Device : Circuit Breaker LockoutQTY/UOM : 6/Package


Miniature Circuit Breaker Lockouts - Tie Bar

04110027



S47

Signages

Specification:Legend : EYE PROTECTIONREQUIRED IN THIS AREA(W/PICTO)Header : CAUTIONSize : 7" H x 10" WColor : Black on YellowMaterial Description : PlasticQTY/UOM : 1/Each


Alert Sign

Specification:Header : DANGERLegend : HIGH VOLTAGE(W/PICTO)Size : 10" H x 7" WColor : Black/Red on WhiteMaterial Description : HighPerformance PolyesterQTY/UOM : 1/Each


Electrical Hazard Sign

Confined Space Sign

Specification:

Header : DANGERL e g e n d : C O N F I N E D SPACE ENTER BYPERMIT ONLY (W/PICTO)Material : Premium FiberglassSIZE : 7" H x 10" WColor : Black/Red on WhiteMaterial Description : Premium FiberglassQTY/UOM : 1/Each


Admittance Sign

Specification:

Header : NOTICELegend : AUTHORIZEDPERSONNEL ONLY(W/PICTO)Material : AluminumSize : 7" H x 10" WColor : Blue/Black on WhiteQTY/UOM : 1/Each


Specification:Legend : Fire Extinguisher(W/PICTO)Size : 6" H x 9" W x 4" DColor : Red on WhiteMaterial Description : Acrylic BackedBrand : PrinzingQTY/UOM : 1/Each


Glow-in-The-Dark Standard "V" Sign



S48

Pipe-Markers

Description:Colorful Aisle Marking Tape fits aisle marking tape applier sold in previous catalogs (tape does not work with Universal Line Applicator). Made of long wearing B-725 vinyl, our tape applies quickly and sticks tightly to virtually any clean, dry surface. Standard roll size is 36 yds.

Specification:Size: 4" x 36 Yds.Color: YellowMaterial Description: Vinyl TapeQTY/UOM: 1/Each

4" Yellow Vinyl Aisle Marking Tape


Arrow Tape

Description:Directional flow arrow tape can enhance safety, improve operating efficiency and provides 360 degree visibility. Tapes are made of durable B-946 material that withstands the elements indoors and out. Supplied in liner-mounted rolled form - use two bands per marker.

Specification:Size: 2" x 30 ydsColor: White on GreenMaterial Description: High Performance VinylArrows Per Roll: 720QTY/UOM: 1/Roll


Warning Stripe & Check Tape

Description:Our Warning Stripe & Check Tapes meet OSHA specification 1910. 144(a) for safety color c o d e s f o r m a r k i n g physical hazards. Made of B-950 vinyl with permanent adhesive to hold on almost any clean, dry surface. Colors are sealed beneath protective layer of abrasion resistant clear vinyl to stand up to your toughest indoor conditions. Standard roll length: 18 yds.

Specification:Legend: (black & yellow diagonal stripes)Size: 2" W x 18 Yds.Color: Black and YellowMaterial Description: VinylStyle: Stripes


Description:M a r k e r s m e e t t h e requirements of the ASME (ANSI) A13.1 Standard for the identification of piping system contents when used with Directional Flow Arrow Tape. Markers are made of durable vinyl that is ideal for indoor and outdoor environments and are supplied on a coated backing material that makes handling and installation easy. Marker ends should be banded with Brady Directional Flow Arrow tape to indicate pipe content flow direction. One 2 1/4" H x 14" W marker per card.

Specification:Legend: BOILER WATERSize: 2 1/4" H x 14" WCharacter Height: 2"Color: White on GreenMaterial Description: High Performance VinylOutside Pipe Diameter: 2 1/2" to 7 7/8"QTY/UOM: 1/Each


Self-Sticking Vinyl Pipe Marker

Floor Marking Tapes



S49

Floor Marking Tapes

Description:

Made of rugged B-916 adhesive-backed polyester tape coated with thousands of particles of durable aluminum oxide grit. Tape bonds permanently to clean, dry floors and withstands grease and oil. Perfect for indoor or outdoor use. Standard roll length is 60'.

Specification:

Size: 2" W x 60' LColor: ClearMaterial Description: Grit-Coated Polyester TapeSpecial Properties: Solid ColorQTY/UOM: 1/Each


Anti-Skid Tape Roll MountedFloor Safety Sign

Description:

D e s i g n e d t o w a r n o f hazardous areas, putting valuable safety information at the point of need.

Specification:

Legend: WATCH YOUR STEP (W/PICTO)Size: 17" DiameterColor: Black on YellowMaterial Description: Vinyl Film with Clear, Matte Anti-Slip Over laminateQTY/UOM: 1/Each


Description:

Made of B-819 matte anti-slip over laminate with a printedmessage to cautionemployees about potential hazards. Black on yellow with a standard roll size of 3" W x 18 yds.

Specification:

Legend: CAUTION WATCH YOUR STEPSize: 3" W x 18 Yds.Color: Black on YellowMaterial Description: Vinyl Film with Clear, Matte Anti-Slip Over laminateQTY/UOM: 1/Each

Hazard Marking Tape


Glow-in-the-Dark Stripes & Solid Tape

Description:

Glow-in-the-Dark tapes are made of durable B-324 phosphorescent material.

Specification:

Size: 2" W x 5 Yds.Color: PhosphorescentMaterial DescriptionGlow-In-The-Dark Self-Stick PolyesterStyle: SolidQTY/UOM: 1/Each


Brady Glow Markers



S50

Description:Glow-in-the-Dark tapes are made of durable B-324 phosphore-scent material.

Specification:Legend: (black & phosphorescent diagonal stripes)Size: 2" W x 5 Yds.Color: Black and PhosphorescentMaterial Description: Glow-In-The-Dark Self-Stick PolyesterStyle: StripesQTY/UOM: 1/Each


Glow-in-the-Dark Stripes & Solid Tape

Glow-in-the-Dark" Photo Luminescent Arrows

Description:

Made of B-324 photoluminescent

vinyl film, our "Glow-in-the

Dark" arrows,footprints and dots are

compliant to 10+ hour

glow life which meets or exceeds the following

standards: ASTM E2072-00/E2073-02/E2030-

02, ASTM E162/E648/E662, SMP 800C, IMO

Resolution A. 752(18), ISO/CD 15370, PSPA

Standard 002 Part 2 1993 Class A Rev. 2:

09/99. Arrow size is 3". Standard package: 100

arrows.

Specification:

Size: 3" LColor: Glow-in-the-DarkMaterial Description: Glow-In-The-Dark Self-

Stick PolyesterShape: ArrowQTY/UOM: 100/Package


Description:BradyGlo™ B-324 arrow tapes exceed ASTM E 2072-00 standard specifications as well as the following standards for 10+ hour glow requirements: ASTM/ E162/ E648/ E662, SMP800C, IMO Resolution A. 752(18), ISO/CD 15370, PSPA Standard 002 Part 2 1993 Class A Rev. 2: 09/99, DIN 67 510, Parts 1-4, NFPA 101 Life Safety Code 2000 7.10.7.2, OSHA 1910.37 and Lloyd's register Cert. 01/6007. Made of B 324 phosphorescent surface printed polyester.

Specification:Legend: (green v-style arrow onphosphorescent)Size: 2" W x 5 Yds.Color: Green and PhosphorescentMaterial Description: Glow-In-The-Dark Self-Stick PolyesterStyle: ArrowQTY/UOM: 1/Each

Glow-in-the-Dark Arrow Tape


Brady Glow Markers



S51

Description:

Made of B-324photoluminescent vinyl

film, our "Glow-in-the-

Dark" arrows, footprints and dots are compliant

to 10+ hour glow life which meets or exceeds

the following standards: ASTM E2072-

00/E2073-02/E2030-02, ASTM E162/ E648/

E662, SMP 800C, IMO Resolution A. 752(18),

ISO/CD 15370, PSPA Standard 002 Part 2

1993 Class A Rev. 2: 09/99. Available in four

sizes. Standard package: 100 dots.

Specification:

Size: 2" DiameterColor: Glow-in-the-DarkMaterial Description: Glow-In-The-Dark Self-

Stick PolyesterShape: DotQTY/UOM: 100/Package


Glow-in-the-Dark" Photoluminescent Dots

Description:

Made with MAXX: greater

performance without the

extra weight. Universal in

nature so it absorbs

basically all fluids (water, petroleum and

chemical-based). Efficient 1-ply construction,

gray, dimpled, economy weight pad. For used

with oil and water-based fluids. Double the

coverage.

Specification:

Application(s): Overspray Leaks & Drips,

Workstations, Drums - Liquid Storage, Outfalls

and Discharge PondsClass: UniversalSize: 15" x 19"Absorbency: 22 gal/caseConfiguration: PadTechnology: Single PlyShipping Weight: 8 lbsQTY/UOM: 100/Bale

Applications:

A variety of industrial settings, for example:Machine Shop, Refineries, Transportation

maintenance, Steel manufacturing, Paper

mills, Just about anywhere you have a leak, drip

or spill.

Universal Sorbents Pads for Maintenance


Sorbents & Spill Contaiment

Brady Glow Markers



S52

Description:

The Re-Form Heavy Weight

Pad made with Re-Form™

Sorbent Material has a

unique composition that

gives users anenvironmentally friendly sorbent that absorbs

up to 50% more than traditional meltblown

polypropylene sorbents.For basic drips & spillsNetted construction - for extra durabilityIndoor use or dry-weather outdoor useGeneral purpose sorbent (not for use w/ highly

aggressive acids & caustics)

Specification:

Class: UniversalSize: 15" x 19"Absorbency: 40 gallon/caseConfiguration: PadTechnology: Re-FormQTY/UOM: 100/Case

RE-FORM PADS, Heavy weight


RE-FORM PADS, Light weight

Description:

The Re-Form Light Weight

Pad made with Re-Form™

Sorbent Material has a

unique composition that

gives users anenvironmentally friendly sorbent that absorbs

up to 50% more than traditional meltblown

polypropylene sorbents.For basic drips & spillsNetted construction - for extra durabilityIndoor use or dry-weather outdoor useGeneral purpose sorbent (not for use w/ highly

agressive acids & caustics)

Specification:

Class: UniversalSize: 15" x 19"Absorbency: 24 gallon/caseConfiguration: PadTechnology: Re-FormQTY/UOM: 100/Case





S53

Economy Spill Kit, Allwik, 18 Litre Spills

Description:

The Allwik Economy

Portable Spill Kit comes

in a highly visible yellow

PVC bag and is "just

right" for small spills of

any material. This kit is the right price, the right

size and the right value.

Contents:

(10) - 15" x 19" Pads(2) - 3" x 4' SOCs(1) - Pair Nitrile Gloves(1) - Disposal BagInstruction Sheet

Specification:

Application(s): Spill ResponseClass: UniversalType: Portable Spill KitsAbsorbency: 5 gal/baleConfiguration: KitShipping Weight: 4 lbsQTY/UOM: 1/Case


Spill Kaddie, Allwik, 83 Litre Spills

Description:

The Allwik® Spill Kaddie is a

mobile, compact emergency spill

kit for fast spill response or

maintenance mess prevention-

for any material -anywhere in the

plant.

Contents:

(1) - 15" x 73' Roll(5) - 3" x 4' SOCs(8) - 10" x 10" Pillows(1) - Pair Nitrile Gloves(5) - Disposal BagsGogglesEmergency Response Handbook

Specification:

Application(s): Overspray Leaks & Drips, Spill

ResponseClass: UniversalType: Mobile Spill KitsAbsorbency: 22 gal/baleConfiguration: KitShipping Weight: 42 lbsQTY/UOM: 1/Kit





S54

Description:

MAXXpacks are

re-sealable zipper

bags filled with 20

full-size sorbent pads.

Specification:

Application(s): Spill ContainmentSize: 14'H x 54'W x 12"DAbsorbency: Capacity: 5,654 GallonsShipping Weight: 239 Lbs.QTY/UOM: 1/Each

Features:

One-piece, portable containment berm system

is ready to use and depolys in seconds-no

assembly, inflation, or tools required.

Innovative strap design : The single-piece

aluminum support system simply snaps into

place. WElded directly onto the berm, there's

nothing to inser, lose, or inflateDrive-in use: Straps can collapse and lay flat

as the truck or forklift pulls into the barm, then

can be re-deployedIts rugged construction is resistant to fuels and

chemicals, meeting or exceeding secondary

containment regulations for most industrial and

military applications.

14' x 54' Standard Portable Spill Berm


Spill Pallet Ramp Only

Description:

Spill pallet ramp. Makes it

easier to move drums on

and off pallet. Works with

both the two-drum and four

drum spill pallets.

Specification:

Class: Secondary ContainmentType: Spill PalletsConfiguration: RampQTY/UOM: 1/Case

Part No Pkg. Qty 104110---




S55

Description:

With their 21-gallon capacity, these low profile, two-drum spill decks are a cost effective means for containing potentially hazardous leaks in your drum storage and dispensing areas. Each modular deck has built in clips to easily and safely connect multiple decks to create a customized drum storage platform.

Specification:

Class: Secondary ContainmentSize: 26"W x 52"L x 6"HType: Spill DecksAbsorbency: 21.2 gal/baleConfiguration: DeckShipping Weight: 30.8 lbsQTY/UOM: 1/Case

Features:

Solid Construction: All of SPC's spill decks and pallets are manufactured utilizing injection molding-ensuring exceptional durability and consistent specifications.Nesting: Remove the grates and stack the decks or pallets within each other for more efficient storage and shipping.Standard Lip and Grate Heights: All SPC spill decks and spill pallets are manufactured to standard heights to allow uninhibited movement between multiple decks and between two and four-drum palletsGrate Pins: Pins keep the grates in place during use and prevent the walls from bulging - prolonging the life of the spill deck.Interchangeable Grades with Large Openings: These removable grates can be used with both your SPC spill decks and spill pallets (even between two and four drum pallets). They also feature large openings for easy leak detection and liquid removalForklift Friendly: Whether you're in North America, Europe, or elsewhere around the globe, these decks have been engineered to make sure you can easily use your forklift to re-locate your decks or pallets and drums.

Spill Deck





S56

Description:

Whether you are looking to comply with governmental secondary

containment regulations or just want the security of knowing your facility is

protected, SPC spill pallets offer ample capacity, even if an entire drum

empties into the unit. Offer ample capacity for containing potentially hazardous

leaks. Comply with secondary containment government regulations. Nestable to make better use of

space.

Specification:

Class: Secondary ContainmentSize: 26"W x 52"L x 17"HType: Spill PalletsAbsorbency: 68.7 gal/baleConfiguration: PalletShipping Weight: 46 lbsQTY/UOM: 1/Case

Features :

Solid Construction : All of SPC's spill decks and pallets are manufactured utilizing injection

molding-ensuring exceptional durability and consistent specifications.Nesting : Remove the grates and stack the decks or pallets within each other for more efficient

storage and shipping.Standard Lip and Grate Heights : All SPC spill decks and spill pallets are manufactured to standard

heights to allow uninhibited movement between multiple decks and between two and four-drum

palletsGrate Pins : Pins keep the grates in place during use and prevent the walls from bulging - prolonging

the life of the spill deck.Interchangeable Grades with Large Openings: These removable grates can be used with both your

SPC spill decks and spill pallets (even between two and four drum pallets). They also feature large

openings for easy leak detection and liquid removalForklift Friendly : Whether you're in North America, Europe, or elsewhere around the globe, these

decks have been engineered to make sure you can easily use your forklift to re-locate your decks or

pallets and drums.

Part No Pkg. Qty 1

Spill Pallet, 2 Drum


04110---



S57

Description:

Whether you are looking to comply with governmental secondary containment

regulations or just want the security of knowing your facility is protected, SPC

spill pallets offer ample capacity, even if an entire drum empties into the unit.

Offer ample capacity for containing potentially hazardous leaks. Comply with

secondary containment government regulations. Nestable to make better use of space. With 128

gallons of containment, this spill pallet has double the capacity of most four-drum spill pallets on the

market

Specification:

Class: Secondary ContainmentSize: 52"W x 52"L x 17"HType: Spill PalletsAbsorbency: 128.9 gal/baleConfiguration: PalletShipping Weight: 88 lbsQTY/UOM: 1/Case

Features :

Solid Construction : All of SPC's spill decks and pallets are manufactured utilizing injection molding-

ensuring exceptional durability and consistent specifications.Nesting : Remove the grates and stack the decks or pallets within each other for more efficient

storage and shipping.Standard Lip and Grate Heights: All SPC spill decks and spill pallets are manufactured to standard

heights to allow uninhibited movement between multiple decks and between two and four-drum

palletsGrate Pins : Pins keep the grates in place during use and prevent the walls from bulging - prolonging

the life of the spill deck.Interchangeable Grades with Large Openings: These removable grates can be used with both your

SPC spill decks and spill pallets (even between two and four drum pallets). They also feature large

openings for easy leak detection and liquid removalForklift Friendly : Whether you're in North America, Europe, or elsewhere around the globe, these

decks have been engineered to make sure you can easily use your forklift to re-locate your decks or

pallets and drums.

Part No Pkg. Qty 1

Spill Pallet, 4 Drum

04110---



TOOLS & EQUIPMENT


TOOLS & EQUIPMENTLPS INDUSTRIAL SUPPLIES

T1

Pneumatic Tools

Description:• Drive Size: 3/8" • Maximum Torque: 122 Nm• OAL – 254 mm • Mechanism – Air handle Grip • Product Weight: 1.25 kg

Features & Applications:• Best for automotive repair, water pump,

radiators.

Air Ratchet


Description:• Drive Size: 1/2" • Maximum Torque : 122 Nm• OAL – 254 mm• Product Weight: 1.25 Kg

Features & Applications:• Best for automotive repair, water pump,

radiators.

Air Ratchet


Description:• Square Drive Size: 3/8" • Air Consumption: 10.60 cfm • Mechanism – 2 Hammer• Hose Size: 10 mm • Maximum Torque: 380 Nm • Speed: 10000 rpm• Air Inlet: 1/4" • Bolt Capacity:13 mm• Product Weight: 1.20 Kg.

Features & Applications:• Compact and lightweight.

Air Impact Wrench

Description:• Square Drive Size: 3/8" • Air Consumption: 8.80

cfm • Mechanism – Pin Clutch• Hose Size: 10 mm • Maximum Torque: 217 Nm • Speed: 10000 rpm• Air Inlet: 1/4" • Bolt Capacity:13mm• Product Weight: 1.30 Kg.

Features & Applications:• Excellent balance allows for smoother

operation.


Description:• Drive Size: 1/2" • Air Consumption: 12 cfm • Mechanism-Rocking Dog• Maximum Torque: 400 Nm • Speed: 7000 rpm• Standard Bolt Capacity: 16 mm• Product Weight: 2.30 Kg.

Features & Applications:• Low Vibration Impact Wrench.

Air Impact Wrench

Air Impact Wrench





T2

Description:• Drive Size: 3/4" • Air Consumption: 13.70

cfm• Mechanism-2

Hammer • Hose Size: 10 mm• Maximum Torque:1356 Nm• Standard Bolt Capacity: 26 mm • Air Inlet: 1/4" • Product Weight: 2.20 Kg.

Features & Applications:• Twin Hammer with a patent hammer frame

structure for long life.

Air Impact Wrench


Description:• Drive Size – ½”• Mechanism – 2 Hammer• Hose Size: 10 • Overall Length: 163 mm• Air inlet: 1/4"• Product Weight: 1.60Kg.

Features & Applications:• Best for muffler and pipe.

Air Hammer



Die Grinder

Description:• Capacity: 1/4" • Overall length:170 mm• Air Consumption: 5 cfm • Hose Size: 5 mm• Free Speed: 18000 rpm • Air Inlet: 1/4" • Product Weight: 0.85Kg

Features & Applications:• Safety Lever Prevents Accidental Starts.

Description:• Capacity: 1/4" • Overall length:160 mm• Air Consumption: 4 cfm • Hose Size: 5 mm • Free Speed: 28000 rpm • Air Inlet: 1/4" • Product Weight: 0.49 Kg

Features & Applications:• Safety Lever Prevents Accidental Starts.

Die Grinder


Pneumatic Tools



T3


Features & Applications:• Compact And Light Weight.

Die Grinder



Die Grinder



Features & Applications:• Safety Lever Prevents Accidental Starts and

front exhaust help keep work surface clean.

Angle Grinder

Description:• Capacity: 7" • Overall length:331 mm• Air Consumption: 33 cfm • Hose Size: 11 mm • Free Speed: 7000 rpm • Air Inlet: 3/8" • Product Weight: 3.05 Kg

Features & Applications:• Best for grinding and smoothing welds and for

rust removal.

Impact Wrench

Description:• 1/2" Impact Wrench • Length: 165.1 mm• Amps: 2.6 • Max imum Torque:

1060 in/lb • Speed: 2300 rpm • Voltage: 12.0 • Product Weight: 4.44 Kg

Features & Applications:• Compact size and weight allow access into

tighter areas and reduce user fatigue.• Heavy duty impacting mechanism directs

torque to fastener without kickback.• Various automotive shops, maintenance

work and die-shops.


Pneumatic Tools



T4

Description:• Air Consumption: 12 cfm • Design-Orbital Dust free• Sanding Pad: 127 mm• Speed: 9000 rpm• Hose Size: 9.5 mm • Air Inlet: 1/4" • Product Weight: 0.90 Kg

Features & Applications:• Light Weight, Low Voice and vibration.

Orbital Sander




Air Screwdriver

Air Riveters


Description:• Height: 324 mm • Air Pressure: 80 – 100 psi • Hose Size: 6.5 mm • Tool Stroke – 16 mm • Air Inlet: 1/4" • Capacity – SS – 4.8, Al – 6.4• Product Weight: 2 Kg

Features & Applications:• Ideal for cutting, trimming and shearing tin,

plastic, aluminum.

Air Screwdriver

Description:• Shank Size: 5/16" • Hose Size: 5 mm • Air Consumption: 4 cfm • Capacity – 5 – 7 mm • Speed: 9000 rpm • Air Inlet: 1/4" • Product Weight: 0.83 Kg.

Features & Applications:• Internal clutch system allows for torque

adjustment.• Best for general repair.

Description:• Shank Size: 1/4" • Hose Size: 5 mm • Air Consumption: 9 cfm • Capacity – 8 - 12 mm • Speed: 8000 rpm • Air Inlet: 1/4" • Product Weight: 1.00 Kg.

Features & Applications:• Internal clutch system allows for torque

adjustment.• Best for general repair.

Pneumatic Tools



T5

Corded Power Tools

Description:• Length: 180 mm• Air Consumption: 6 cfm • Hose Size: 9.5 mm• Speed: 1800 rpm • Air Inlet: 1/4" • Capacity Size: 3/8" • Product Weight: 1.10 Kg

Features & Applications:• Double Reduction gears for exceptional

power and high quality tool for all purpose drilling.

Air Drill




Heat Gun

Air Drill


Description:• Length: 203 mm• Air Consumption: 8 cfm • Hose Size: 9.5 mm • Speed: 800 rpm• Air Inlet: 1/4" • Capacity Size: 1/2" • Product Weight: 1.60 Kg

Features & Applications:• Durable and TPR Comfort grip.

Drills

Description:• Watts = 2000 W • Air temperature = 120

650 degree Celsius

Features & Applications:• Heat guns can be used to dry and

strip paint, apply heat shrink tubing, apply shrink film, dry out damp wood, bend and weld plastic, soften adhesives, heat shrink wrap on packaging.

Description:• Light Duty Drills• Capacity in steel= 6mm • Capacity in wood= 15 mm• R.P.M =3000• watts=350 W

Features & Applications:• Helical-cut steel, Heat treated gears including

chuck key and holder.• For drilling holes in Steel, wood and concrete

in furniture making, fabrication and Construction industries as well as for maintenance purpose in all industries.

Pneumatic Tools



T6

Drills

Part No

Part No

Pkg. Qty

Pkg. Qty

05020002

05020110

1

1

Description:• Capacity in steel= 10mm • Capacity in wood= 25 mm• R.P.M =3000 • watts=450 W

Features & Applications:• Helical-cut steel, Heat treated gears including

chuck key and holder.• For Extensive use in drilling in steel, wood

and metal industries.

Corded Power Tools


Drills

Description:• Heavy Duty Drill• Capacity in steel= 13 mm • Capacity in wood= 38 mm • R.P.M =1000• watts=800 W

Features & Applications:• Rear -mounted assist spade handle, Pre

lubrication ball bearings.• Useful in drilling in almost every metal, wood

and concrete.

Drill

Description:• Right Angle Drill/Driver• Speed: 400 / 1200 rpm • Watts : 450W• Chuck Size: 3/8" • Product Weight: 4.25 Kg

Features & Applications:• High power, high efficiency motors deliver

maximum performance in all drilling and fastening applications.

• Heavy duty self tightening chuck tightens throughout operation providing superior bit griping.



Angle Grinder

Description:• Capacity: 4" • Overall length :

226 mm• Air Consumption :

23 cfm • Hose Size: 10 mm • Free Speed: 11000 rpm • Air Inlet: 1/4" • Product Weight: 1.82 Kg

Features & Applications:• Best for grinding and smoothing welds and for

rust removal.



T7

Corded Power Tools


Angle Grinder

Description:• Disc Diameter= 100mm • Power input= 700 W • R.P.M = 11000

Features & Applications:• Removal of material from sheet metal, steel,

casted or forged items.• Removes excess metal beads formed during

welding, casting & forging parting lines.

Angle Grinder

Description:• Disc Diameter= 100mm • R.P.M =11000 • watts=570 W

Features & Applications:• Removal of extra material from forging,

casting parts.• Used by every fabrication, casting and

forging industry for excess stock removing from work piece and finishing.

Part No

Part No

Pkg. Qty

Pkg. Qty

05020008

05020021

1

1

Angle Grinder

Angle Grinder

Description:• Capacity= 125 mm • R.P.M = 11000 • watts=840-1100 W

Features & Applications:• Removal of casting and finishing of various

types of steel, bronze and aluminum materials.

• Can be used for grinding on various alloys and metals for stock removal in automotive parts manufacturing units.

Description:• Capacity= 150 mm • R.P.M = 8000 • watts=1600 W

Features & Applications:• Removal of extra material from forging,

casting parts.• Soft start and torque limiter provides safer

operation and protects from overloading damage.

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05020010

05020022

05020023

05020024

1

1

1

1




T8

Corded Power Tools

Angle Grinder

Description:• Capacity= 180 mm • R.P.M = 8500 • Watts=2000-2600 W

Features & Applications:• For heavy duty grinding of various materials.• Can easily grind and cut a wide range of

engineering materials in construction, fabrication and automotive part industries.

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05020012

05020025

05020026

05020027

05020028

1

1

1

1

1

Angle Grinder

Description:• Capacity= 230 mm • R.P.M = 6600-8500 • watts=2200-2600 W

Features & Applications:• Grinding of hard materials such as forging,

castings and steel.• Best in class performance with superior

double insulation, variable speed for lesser fatigue to worker with safer operation best suitable for foundries and automotive welding and machining shops.

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

05020029

05020030

05020031

1

1

1

Die Grinder

Rotary Hammer

Description:• Max Grinding Wheel Dia= 25mm • Collet Dia= 6 mm • R.P.M =25000 • watts= 240-400 W

Features & Applications:• Long life brush system, Heavy-duty

aluminum gear case.• Easier to access those areas where it is

difficult to work with angle grinders and material to be removed is very less.

• For use in automotive shops and foundries.

Description:• Capacity = 20 mm

and 22 mm• R.P.M =0-1050 • watts= 710 W

Features & Applications:• Suitable for Heavy duty Work• Lightweight design provides comfort for

extended use.• For construction industries, mainly for use on

concrete.

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05020013

05020047

05020048

05020049

1

1

1

1

Part No

Part No

Pkg. Qty

Pkg. Qty

05020034

05020035

1

1



T9

Corded Power Tools

Rotary Hammer

Description:• Capacity= 24,28 mm• R.P.M =0-1100 , • watts= 800 W

Features & Applications:• Variable speed, soft start allows for precise

hole placements and safety.• Lightweight design provides comfort for

extended use.• Reversible mode and dust collector for

better performance and suitable for use in construction industries.

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

05020036

05020037

05020038

1

1

1

Rotary Hammer

Description:• Capacity= 32 mm• R.P.M =315-630 • watts= 850 W

Features & Applications:• Heavy duty robust built up for use in concrete

breaking units.• Electronic speed control and torque limiter for

safe and superior performance.


Rotary Hammer

Description:• Capacity= 40 mm• R.P.M =680 and

235-480 rpm• Watts= 1050-1100 W

Features & Applications:• Continuous use for a longer period of time is

comfortable by soft start and lighter frame structure.

• Best performance among its range for Heavy Duty construction industry applications.

Description:• Capacity= 52 mm• R.P.M =130-260 rpm• watts= 1500 W

Features & Applications:• Best performer in heavy duty range.• Variable speed and electronic speed control

provides safer operation.• For construction industries.

Rotary Hammer

Part No

Part No

Pkg. Qty

Pkg. Qty

05020040

05020041

1

1




T10

Corded Power Tools

Jigsaw

Description:• RPM: 1000 • Watts: 160 W• Pad Size: 93 x 185 mm

Features & Applications:• For cutting sheets of steel in fabrication

industries as well as for wood cutting.• Cushion grip for superior gripping and

control.

Marble Cutter

Description:• Max Cutting Depth: 100 mm• Blade Dia= 355 mm• RPM: 4000• Watts: 2000 W

Features & Applications:• Cutting and scribing various types of stones,

tiles and concrete industries.



Sanders

Description:

• Max Cutting Capacity : 35 mm• Blade Dia : 115 mm• RPM : 11500• Watts : 1400

Features & Applications:

• Cutting and scribing various types of stones, tiles, concrete industries.

Description:

• Spindle thread: M14• Disc Dia: 180 mm• RPM: 3000• Watts: 1000 W


• Grip for easy handling, design for flush sanding up to vertical surfaces.

• For use in furniture making industries and fabrication for rust removal, finishing and polishing of surfaces.

Marble Cutter





T11

Corded Power Tools

Sanders

Description:

• Capacity: 180 mm• RPM: 3000 • Watts: 1200 W


• Can be used in fabrication industries and furniture making industries for polishing & sanding.

• Cushion Grip for easy handling, designed for sanding various surfaces.

Blowers

Description:

• Air Pressure:700 mm• Air Volume : 2.8 m3/min• N o - L o a d s p e e d

13000/min• Watts :620 W• Variable

Speed for controlled air volume.


• Cleaning power distribution penal and other equipment located in power plants, factories.



Cordless Power Tools


Drills

Description:• Capacity in steel= 10mm • Capacity in wood= 25 mm • R.P.M =1240• watts=550 W • Variable Speed, Reversible

Features & Applications:• Soft start with reversible speed, double

insulation for longer life span for heavy duty use.

• Can be used in various drilling operation on wood, concrete and metal working industries.

Drill

Description:• Capacity in steel= 13mm• Capacity in Concrete= 30 mm • R.P.M =1200• watts=500 W

Features & Applications:• Extra long switch handle and pipe handle

allow maximum leverage for drilling and reaming larger hole, Rear mounted assist spade handle.

• Heavier structure provides higher stability in drilling various type of holes in Fabrication, maintenance work and steel industries.

Part No

Part No

Pkg. Qty

Pkg. Qty

05020004

05020111

1

1



T12

Drills

Description:• 9.6 V Drill/Driver• Contents: 2 Batteries, Charger • Speed: 0 - 600 rpm • Capacity: 1.5 Ah• Capacity in steel: 10mm• Charge time: 60 minutes

Features & Applications:• High power, high efficiency batteries deliver

maximum performance in all drilling and fastening applications where power is not available easily.


Description:• 12 V Drill/Driver• Contents: 2 Batteries, Charger • Capacity: 1.5 Ah • Capacity in steel: 10mm• Charge time: 60 minutes

Features & Applications:• High power, high efficiency motors deliver

maximum performance in all drilling and fastening applications.


• Can be useful for driving screws and drilling but recommended to a limit for drilling.

Drills



Drills

Drill

Description:• Impact Drill• Capacity in steel= 10mm • Capacity in wood= 25 mm • R.P.M =2500 • 14.4v

Features & Applications:• For drilling in concrete and drilling without

hammering in wood, reversing with cushion grip handle.

Description:• Impact Drill• Capacity in steel =

13mm Concrete 16 mm• R.P.M =3200 • 18v

Features & Applications:• Variable speed to suit working according to

load and material of the work piece.• Reversible and can be used for various

automotive parts manufacturing, fabrication industries and maintenance works.

Part No

Part No

Pkg. Qty

Pkg. Qty

05030---

05030---

1

1





T13

Cordless Light

Description:

• 14.4 V Cordless Flashlight• Color: Blue • Style: Pivoting Head • Voltage: 14.4 V• Product Weight: 1.08 Kg


• Faceted reflector offers bright uniform beam. Battery not included.

• Compatible with clip-lock belt attachment.

Description:• Drive Size: 1/2" • Length: 203 mm • Maximum Torque: 155 N-m • Speed: 2600 rpm • Voltage: 18.0 • Battery: 2 Ah Ni-Cd • Overall Length: 203 mm

Features & Applications:• Compact size and weight allow access into

tighter areas and reduce user fatigue.• For assembly shops, maintenance work

applications.• For Heavy duty impacting mechanism directs

torque to fastener without kickback.

Impact Wrench Description:

• 14.4 V Flexible Flashlight• Color: Yellow / Black • Style: Flexible • Voltage: 14.4 • Product Weight: 0.512 Kg


• Flex-neck design allows for hands-free use and versatility to stand or hang the light.

• Wide beam angle of light is brighter than conventional flashlights.


Impact Wrench



Description:

• 18 V Impact Wrench • Length: 201 mm• Maximum Torque: 28 N-M • Speed: 700 rpm• Voltage: 18.0 V• Battery: Ni-Cd 1.5Ah


• Compact size and weight allow access into tighter areas and reduce user fatigue.

• Heavy duty impacting mechanism directs torque to fastener without kickback and for maintenance and assembly shops.

Cordless Light




T14

Clamping and Holding

Bench Vices

Description:• Cast Iron Fixed Base Bench

Vice• Sizes: 3",4",5",6",8"

Features & Applications:• Exclusive wilt on powder coat finish

resists scratches.

Cordless Light

Description:

• S t e e l F a b r i c a t e d Bench Vice

• Sizes:3",4",5",6",8"


• Exclusive wilt on powder coat finish resists scratches.


Cordless Light


Description:• 18 V Pivoting Head Flashlight• Color: Yellow / Black • Style: Pivoting Head • Voltage: 18.0 • Product Weight: 0.30 Kg

Features & Applications:• Pivoting head rotates 90 degree.• Wide-angle beam• Light weight• Compact design.

Description:

• 18 V LXT Flashlight• Color: Black / Blue • Length: 282.4 mm• Battery Size: 18V • Battery Burn Time: 4.3 hr • Batteries Required: 1 • Product Weight: 0.54 Kg


• Faceted reflector offers bright uniform beam. Battery not included.

• Compatible with clip-lock belt attachment.

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05040001

05040002

05040003

05040004

05040005

2

2

2

2

2

Bench Vices

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05040016

05040017

05040018

05040019

05040020

2

2

2

2

2




T15

Hand ToolsClamping and Holding

Sockets

Description:

• Socket Drive Size : 1/2" • Finish : Satin Chrome Finish• Material: Chrome vanadium

Alloy Steel • Size : 8-24mm, 26mm, 27mm,

28mm, 30mm, 32mm, 34mm• Style : Regular • Number of Points : 6,12


• Manufactured from premium grade chrome vanadium alloy steel.

• Unsurpassed wear resistance, durability.• Chrome finish gives appearance.

G-Clamps

Vices

Description:

• Cast Iron Swivel Base Bench Vice

• Sizes: 3",4",5",6",8"


• Serrated steel replaceable top jaws, swivel base

Description:

• Sizes: 2",3",4",6",8",10",12"


• Heat treated• Drop forged clamp

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05040006

05040007

05040008

05040009

05040010

2

2

2

2

2

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05040040

05040041

05040042

05040043

05040044

05050045

05040046

5

5

5

5

5

5

5

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

050500010505000205050003050500040505000505050006050500070505000805050009050500100505001105050012050500130505001405050015050500160505001705050018050500190505002005050021050500220505002305050024

1010101055555555555555555555



T16

Ball Pein Hammers

Description:

• Weight: 200,500,600,800 Gm


• Hammer heads drop forged from selected steel with good quality knotless seasoned wooden handles.

Sockets

Description:

• Socket Set:: 6 Sockets• 10,13,14,17,19,22• 1 Accessories• Handle: 220 mm


• Manufactured from premium grade chrome vanadium alloy steel.

• Wear resistant, fine quality and reliability.


Note:- Other sets also available.

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05050295

05050296

05050297

05050298

5

5

5

5

Cross Pein Hammers

Description:

• Weight:200,500,600,800 Gms


• Hammer heads drop forged from selected steel with good quality knotless seasoned wooden handles.

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05050299

05050300

05050301

05050302

5

5

5

5

Sledge Hammers

Description:

• Weight:2,3,4,5,6,8,10,12 lbs


• Hammer heads drop forged from selected steel with good quality kno t less seasoned wooden handles.

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05050394

05050395

05050396

05050397

05050398

05050399

05050400

05050401

5

5

5

5

5

5

5

5

Hand Tools



T17

Hammers

Description:

• Length: 330 mm• Weight: ½, 1 lbs


• 60% Fiberglass Handle

Part No

Part No

Pkg. Qty

Pkg. Qty

05050386

05050387

5

5

Shovels

Description:

• Square Nose Shovel• Nominal weight of blade : 1.8, 1.25,

2.0Kg


• Made up of superior materials and is design to stand up to rigorous use in the toughest environments.


Shovels

Description:

• Round Nose Shovel• Nominal weight of blade: 1.6,1.2 Kg


• Made up o f super io r materials and is design to stand up to rigorous use in the toughest environments.


Wheelbarrows

Description:

• Handle Length: 1.52 mm• Wheel Type: 2-Ply Radial • Tray Material: Steel


• Made up of high quality plastic which can handle large amount of load.


Hand Tools



T18

Description:• Combination Spanner• Finish: Chrome Plated • Size: 6-32 mm

Features & Applications: • Professional quality ring spanner with thin

walled chamfered rings Drop forged from chrome vanadium steel.

WrenchWrench

Description:• Bi-hexagonal Ring

Spanner• Finish: Chrome Plated• Size: Variable given in Table

Below

Features & Applications: • Professional quality ring spanner with

thin walled chamfered rings ideal to reach recessed fasteners.

• Drop forged from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection.

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05050091

05050092

05050093

05050094

05050095

05050096

05050097

05050098

05050099

05050100

05050101

05050102

05050103

05050104

05050105

05050106

05050107

05050108

05050109

05050110

05050111

05050112

05050113

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

5

5

5

2

2

1

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05050117

05050118

05050119

05050120

05050121

05050122

05050123

05050124

05050125

05050126

05050127

05050128

05050129

05050130

05050131

05050132

05050133

05050134

05050135

05050136

05050137

05050138

05050139

05050140

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

Hand Tools



T19

Wrench

Description:• Slogging Wrench Open End• Finish : Black finish• Size : 30 -110 mm• Material : Drop

forged chrome plated

Features & Applications: • Heavy duty impact spanner with strong

profiled handle and durable • Drop forged from high grade selected steel

with head set at 15 degree. • Finish : Black

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05050187

05050188

05050189

05050190

05050191

05050192

05050193

05050194

05050195

05050196

05050197

05050198

05050199

05050200

05050201

05050202

05050203

05050204

05050205

05050206

5

5

5

5

5

5

5

5

2

2

2

2

2

1

1

1

1

1

1

1

Wrench

Description:• Single Open End Spanner• Finish: Black finish• Size: 7-105 mm• Material: Drop forged chrome plated

Features & Applications: • German type engineer's spanner with a

raised collar around the open end.• Drop forged from chrome vanadium steel with

head set at 15 degree.

Part NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart No

Pkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. Qty

050501510505015205050153050501540505015505050156050501570505015805050159050501600505016105050162050501630505016405050165050501660505016705050168050501690505017005050171050501720505017305050174050501750505017605050177050501780505017905050180050501810505018205050183050501840505018505050186

101010101010101010101010101010101010101010555522222211111

Hand Tools



T20

Wrench

Description:• Slogging Wrench Ring End• Finish : Black finish• Size : 30-110 mm• Material : Drop forged

chrome plated

Features & Applications: • Steel heavy duty bi-hexagonal spanner with

short, strong profiled handle with durable striking end.

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05050207

05050208

05050209

05050210

05050211

05050212

05050213

05050214

05050215

05050216

05050217

05050218

05050219

05050220

05050221

05050222

05050223

05050224

05050225

05050226

5

5

5

5

5

5

5

5

2

2

2

2

2

1

1

1

1

1

1

1

Wrench

Description:• Double Open End

Spanner• Size: :6-60 mm• Material: Drop forged chrome plated

Features & Applications: • German t ype eng inee r ' s spanne r

with a raised collar around the open ends and each head set at 15 degree angle.

• Drop forged, chrome vanadium steel.

Part NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart NoPart No

Pkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. Qty

050500440505004505050046050500470505004805050049050500500505005105050052050500530505005405050055050500560505005705050058050500590505006005050061050500620505006305050064050500650505006605050067050500680505006905050070050500710505007205050073050500740505007505050076050500770505007805050079050500800505008105050082

101010101010101010101010101010101010101010101010101010101010101010101010555

Hand Tools



T21

Adjustable Wrench

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05050260

05050261

05050262

05050263

10

10

10

10

Description:• Finish: Black & Chrome finish• Overall length: 150, 200, 250,

300 mm

Features & Applications: • Made from drop forged chrome vanadium

steel.• Thin tapered jaws, slender handle specially

designed for narrow openings.

Pipe Wrench

Description:• Finish : Handle red

powder coated• Overall length : 200, 250,

300, 350, 450, 600, 900 mm

Features & Applications: • American still son pattern.• Drop forged chrome vanadium steel.• Also available heavy duty pipe wrenches in

different sizes for tough duty jobs.

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05050278

05050279

05050280

05050281

05050282

05050283

05050284

10

10

10

5

5

5

2

Note:- Heavy Duty pipe Wrench & Chain Pipe Wrench Also Available.

Screwdrivers

Description:• Engineering Pattern Screwdriver• Blade Size : 5x75, 5x100, 6x125,

6x150, 6x200, 6x300,8x150, 8x200, 8x250, 8x300 mm

Features & Applications: • Especially alloy steel blade and

tip are forged and heat treated for high strength.

• Amber handle has acomfortable, full size grip with deep, black flutes.

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05050327

05050328

05050329

05050330

05050331

05050332

05050333

05050334

05050335

05050336

05050337

05050338

05050339

05050340

05050341

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

Hand Tools



T22

Screwdrivers

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05050342

05050343

05050344

05050345

05050346

05050347

05050348

05050349

05050350

05050351

10

10

10

10

10

10

10

10

10

10

Description:• Philips Pattern Screwdriver• Blade Size: 5x75, 6x100, 8x150,

5x200, 6x250, 8x250, 5x150 mm

Features & Applications: • Especially alloy steel blade a n d

tip are forged and heat treated for high strength.

• Amber handle has a comfortable, full size grip with deep, black flutes.

Screwdrivers

Description:• Neon tester• Overall length: 125 mm

Features & Applications: • Line tester with neon bulb & blade

made from high grade steel chrome plated, with magnetized tip.


Long Nose Plier

Description:• Finish : Chrome • Type : Long Reach

Pliers • Overall Length :

125mm,160 mm• Tip/Nose Style :

Tapered

Features & Applications: • Professional Quality drop forged from

chrome vanadium steel hardened and tempered with fine diagonally opposed serrations enable gripping of thinnest wires and components.

Part No

Part No

Pkg. Qty

Pkg. Qty

05050271

05050272

10

10Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Combination Plier

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

05050264

05050265

05050266

10

10

10

Description:• Finish : Black Phosphate• Material : Carbon Steel • Overall Length : 150 mm, 175 mm,

210 mm• Handle Type : Cushion Grip • Tip/Nose Style : Round Needle

Features & Applications: • Professional Quality drop forged

from chrome vanadium steel hardened and tempered with additionally induction hardened cutting edges.

Hand Tools



T23

Micro Shear Plier

Description:• Finish: Black finish• Overall length: 125 mm• Material: Alloy steel

Features & Applications: • Thin angular profile reduces operation effort.• Cutting edges offset at 15 degree to enable

flush cutting.• Spring loaded handles with injection molded

sleeves.

Circlip Plier

Description:• Finish : Black Finish• Material : Chrome vanadium steel• Circlip plier : 175 mm

(internal & external)

Features & Applications: • Professional Quality drop forged from chrome

vanadium steel hardened and tempered with fine diagonally opposed serrations enable gripping of thinnest wires and components.


Grip Lock Plier

Description:• Finish : Nickel Plated• Material : Carbon Steel• Overall length : 250 mm

Features & Applications: • Drop forged jaws from chrome

vanadium steel, induction hardened. Superior steel handles & release lever. The high tensile knurled head screw facilitates micro adjustment.



Bolt Cutter

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

05050324

05050325

05050326

10

10

10

Description:• Bolt cutter• Finish: Handles red lacquered,

blades black finish• Material: Alloy steel• Overall length: 450,600,750 mm

Features & Applications: • A high performance bolt cutter

designed to cyt medium tensile & soft bolts, rod rivets, bars & chains.

• Blades drop forged from special alloy steel & interchangeable.

Hand Tools



Hacksaw Frame

Description:• Material: with wooden handle &

plastic handle• Sizes: 250 mm, 300 mm

Features & Applications: • Strong rigged frame with polished

handle.• Fitted with steel cutting blade.• Also available die casted designed handle.• Mainly used in industries for cutting purposes.

Part No

Part No

Pkg. Qty

Pkg. Qty

05050408

05050411

10

10

Allen Keys

Description:• Material: High grade alloy

steel• Sizes: 1.5 - 10 mm,1/16" - 3/8"

Features & Applications: • Mainly made of high grade alloy steel

with chamfered head.• Mainly used where spanners are not easy to

reach.

Part No

Part No

Pkg. Qty

Pkg. Qty

05050499

05050514

10

10

Chisels

Description:• Type : Flat & octagonal Shape• Sizes : 200,250,300 mm

Features & Applications: • Mainly made from forged selected carbon

steel, duly hardened and tempered.• Used in carpentry industry to remove the

unwanted material.

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

05050419

05050420

05050421

10

10

10

Grease Gun

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

05050483

05050484

05050485

5

5

5

Description:• Sizes : 8,10,15 oz

Features & Applications: • Mainly used in industrial and

automotive applications wherepump action for grease is required.

Hand Tools

T24



T25

Soft Tool Bag

Description:• 12-Pocket

ProfessionalCarpenter Apron

• Material: Topgrain leather

• 4 Main nail / tool pockets• 6 Smaller pockets• 2 Leather hammer loops• Leather tape pocket

Features & Applications: • Double gussets keep front pockets wide open

for easy access.


Description:• Material: Top

grain leather• 4 Main nail /

tool pockets• 6 Smaller

pockets• 2 Leather hammer loops• Leather tape pocket


for easy access.

Soft Tool Bag


Soft Tool Bag


Description:• Material: Split leather• 4 Main nail / tool pockets• 6 Smaller pockets• Leather tape pocket


for easy access.

Soft Tool Bag

Description:• Material: Split

leather• 4 Main nail / tool

pockets• 6 Smaller

pockets• 2 Leather hammer loops


for easy access.


Hand Tool Bags



T26

Hand Hacksaw Blades

Description:• 12-Pocket Professional

Carpenter Apron• Material : Top grain leather• 4 Main nail / tool pockets• 6 Smaller pockets• 2 Leather hammer loops• Leather tape pocket


for easy access.


Description:• Carbon Steel Hacksaw

Blade• Size: 12 x 1/2 x 0.025 inches

Features & Applications: • Shatter resistant design for greater

safety.

Hand Hacksaw Blades


Power Hacksaw

Description:• Bi-Metal• Size: 12x1 x 0.050 - 32 x 2-1/2 x 0.100

inches.

Features & Applications: • Bi-metal construction allows blades to

bend & flex without breaking.

Part No

Part No

Pkg. Qty

Pkg. Qty

05060157

05060158

10

3

Band Saw Blades

Description:• Size: 1/4 x 0.025 - 1 x

0.035 inches

Features & Applications: • Tooth design for longer blade life.

Part No

Part No

Pkg. Qty

Pkg. Qty

05060159

05060160

3

3

Hand Tools



T27

Flat Files

Description:• Size: 100mm, 150mm, 200mm,

250mm, 300mm, 350mm

Features & Applications: • Used for smoothing lathe work, draw

filling and other precision work.

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05060007

05060008

05060009

05060010

05060011

05060012

10

10

10

10

10

10

Description:• Size : 100mm,

1 5 0 m m , 2 0 0 m m , 250mm, 300mm, 350mm

Features & Applications: • 2 in 1 file - Flat side for flat surface and

rounded side for curved surfaces.

Half Round Files

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05060043

05060044

05060045

05060046

05060047

05060048

10

10

10

10

10

10

Round Files

Description:• Size: 100mm, 150mm, 200mm,

250mm, 300mm, 350mm

Features & Applications: • Used for enlarging holes and shaping

curves.

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05060061

05060062

05060063

05060064

05060065

05060066

10

10

10

10

10

10

Square Files

Description:• Size: 100mm, 150mm, 200mm, 250mm,

300mm, 350mm

Features & Applications: • Ideal for slots and keyways. • It works great on square holes and other

general surface filling.

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05060079

05060080

05060081

05060082

05060083

05060084

10

10

10

10

10

10

Hand Tools



Measuring, Leveling, Testing

Description:• Torpedo Level• Length: 20, 23, 30, 40, 50,

60c.m.

Features & Applications: • Full Length Magnetic Strip, Top Read

Windows.

Levels

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05070028

05070029

05070030

05070031

05070032

05070033

10

10

10

10

10

10

Steel Tape Measures

Description:• Blade Width : 9.5mm,

Length : 5 - 50m• Case: Leatherette

Features & Applications: • All tapes have ABS body, rigid blade with

protective coating.

Part No

Part No

Pkg. Qty

Pkg. Qty

05070001

05070006

10

5

Steel Tape Measures

Description:• Blade Width: 13m, Length: 5 -

50m, • Case: Leatherette

Features &Applications: • All tapes have ABS

body, rigid blade with protective coating.

Part No

Part No

Pkg. Qty

Pkg. Qty

05070007

05070013

10

5

Pvc Coated Fiberglass

Description:• Length: 3 - 50 m• Case: Leatherette

Features & Applications: • All tapes have ABS body, rigid blade with

protective coating.

Part No

Part No

Pkg. Qty

Pkg. Qty

05070021

05070027

10

10

T28



Automotive

Hydraulic Bottle Jack

Description:• Capacity : 2-100 ton • Plain Ram• Closed height : 190/415mm • Hydraulic Lift : 120/150mm• Extended Height : 385/565mm• Ram Dia : 30/315mm• Body Dia : 65/623 mm

Features & Applications: • Safety overload system protects jack from

being used beyond its rated capacity.

Part No

Part No

Pkg. Qty

Pkg. Qty

05100001

05100002

1

1

Description:• Capacity : 2-500 ton • Screwed Ram• Closed height : 205/500mm • Hydraulic Lift : 120/150mm• Extended Height : 325/650mm• Ram Dia : 30/315mm• Body Dia : 65/623mm



Part No

Part No

Pkg. Qty

Pkg. Qty

05100003

05100004

1

1

Hydraulic Bottle Jack

Description:• Capacity : 10 ton• Net Weight : 180 kg• Overall length : 1400 mm



Trolley Jack


Three Square Files

Description:• Size : 100mm, 150mm, 200mm,

250mm, 300mm, 350mm•Features & Applications: • Used for angles more acute than 90°

for cleaning corners, filling cutters and taps.

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05060097

05060098

05060099

05060100

05060101

05060102

10

10

10

10

10

10

Measuring, Leveling, Testing

T29


ABRASIVESLPS INDUSTRIAL SUPPLIES

T30

Bonded Wheels

Description:• Carbide Grinding Wheels• Size varying from diameter

100 to 300 with different thickness & bore size with strong bonding.

• Complete Range of Carbide grinding wheels specially designed for high performance and to suit customer’s requirements.

Features & Applications: • Carbide Tool Regrinding• General Engineering Industries• Foundry and Forgings

Tech Tips:• Forcing the tool into the wheel will not only

ruin the orientation of the edge, but also possibly can induce a crack or breakage in the wheel.

Part No

Part No

Pkg. Qty

Pkg. Qty

0508----

0508----

5

5

Description:• Available in various sizes from 150 mm to 300 and varying composition• Strong VS3 Bonding for high performance and high material removal rate.

Features & Applications: • Lower Cost per component• Ability to grind a wide range of ferrous materials.

Tech Tips:• Take light depth of cut when work piece not flat or parallel because too heavy cut can heat the work

piece too much to cause metallurgical effect.• Misalignment of Wheel spindles can cause breakage of the wheel.

Surface Grinding

Offhand Wheels

Description:• Bench & Pedestal Wheels• Size from 200 diameter to

600 with grit alteration and strong vitrified bond.

Features & Applications: • Available in both Aluminium Oxide & Silicon

Carbide• Ability to grind a wide variety of materials.• Safe operation• Grinding of Excess material in Casings &

forgings.• Resharpening of single point cutting tools.

Tech Tips:• Always ensure that the machine bearings are

in good condition and check for excessive run-out due to worn-out bearings before use.

• Do not hit the job on the wheel face to open grinding face.

• It is not recommended to use Ø 200 mm and above wheels on portable machines.

Part No

Part No

Pkg. Qty

Pkg. Qty

0508----

0508----

5

5

Grinding Wheels



T31

Tool room Wheels

Description:• Available in various sizes

from 150mm to 200 and varying grit size and width to suit customer’srequirements.

• Self-Sharpening abrasive

Features & Applications: • High performance vitrified bond• Fast stock removal, cool cutting• Enhanced wheel life• For tool and cutter grinding and drill

sharpening.

Tech Tips:• For best results while truing/dressing tool

room wheels, use wide range of diamond dressers available.

Cylindrical Wheels

Description:• Available in size range from 250mm

to 500mm.• High Grinding Efficiency

Features & Applications: • Specially designed for better corner

r e t e n t i o n a n d m o r e n o . o f components between dressings using vitrified bonding.

• For OD grinding of gear shafts, splined shafts and plunge grinding.

Tech Tips:• Fast traverse of the diamond dresser along

the wheel face results in an open wheel aiding higher material removal rate.

• Use abundant supply of coolant during grinding operation.

Description:• Available in size range from

300 mm to 500 mm.• VS3 Bonding ensuring free

cutting action, good corner holding and less frequent dressing.

Features & Applications: • Versatile abrasive capable of grinding

different materials.• Advanced bonding for superior grinding

efficiency and performance.• For bar and bearing race OD ring grinding.• Auto parts grinding e.g. piston pins, shock

absorber tubes & rods, engine valve stems Dowell pins.

Tech Tips:• Dressing of the wheel to be done only when

strictly required and the dressing depth should be just adequate to clean the wheel face and maintain its sharpness.

• Ensure zero slippage while driving regulating wheels to avoid flat spots.

• In centreless grinding, wheel performance and job quality is quite influenced by correct workrest blade setting, its angle and hardness.

Centreless Wheels

Grinding Wheels



T32

Crankshaft Wheels

Description:

• Available in size range from 660 mm to 710 mm with varying composition and width.


• High Material Removal Rate with excellent form holding.

• Superior Vitrified Bond.• For giving required dimensional tolerances

after forging and machining for Crankshaft used in automobiles.

• To give required form and surface finish on the outside diameter of the crankpin and journals.

Tech Tips:

• Check that the mounting flanges are at least one-third diameter of wheel and relieved around hole.

• Ensure use of “Mount up” marking.• Ensure correct position of coolant nozzles &

adequate flow rate for efficient grinding.

Description:

• Available in size range f r o m 2 3 0 m m t o 300mm with varying composition and width.

• Available in rubber as well as resinoid bonding.


• Better resiliency and gripping power.• Less slippage and rejection.• Higher dimensional accuracy and shock

absorption.• For use in centreless grinding as a control and

feed wheel.

Tech Tips:

• The tilt given to the regulating wheel directly affects the fed rate of the work piece and hence is important with respect to the finish obtained and the productivity of the process.

• Set a proper offset of dressing tool to ensure line contact between regulating wheel and the job in through-feed grinding.

Regulating Wheels

Grinding Wheels



T33

Depress Centre Discs

Description:• Size range from 100 mm to

230mm with a thickness of 2.2 to 7mm and different bore size.

• Offering depressed centre discs for excellent on applications like SS flat grinding, SS fabrication.

• depressed centre discs for best performance in Indian market. They can be customized based on user needs.

• depressed centre discs offer value for money proposition.

• Depressed centre discs for low horse power machines and are designed for good cut rate and meets general angle grinding application requirements.

• range of Extra thin wheels in less than 2mm thickness for precision easy cutting.

Features & Applications: • For pipe cutting (CI/SS/MS) in Fabrication

and pipe manufacturing industries, steel ingot & bar manufacturing industries

• For removing gate/riser in Foundries• For storage tank fabrication industries and

removal of irregularities on steel rolled flats.

Tech Tips:• Follow safe mounting practices as per BIS.

Use flanges which support the depressed centre totally.

• Use machines confirming to BIS safety standards.

• Don’t over tighten depressed centre discs. It may result in Breakage or cracks.

• Don’t apply excessive pressure while grinding (Recommended pressure 8-10 Kg).

• Always use wheel guard covering at least half the disc diameter.

Zirkon

Spit Fire

Gemini

Bear

BDX

Description:• Size range from 100mm to

400mm with a thickness of 2.5 to 7mm and different bore size.

• Offering reinforced cut-off wheels for users interested in premium performance on applications like SS fabrication.

• reinforced cut-off wheels are specially engineered for versatile suitability on most cutting applications.

• Reinforced cut-off wheels offer a unique proposition of low thickness to enhance cutting efficiencies and are found best suitable for casting industries.

• reinforced cut-off wheels for non-ferrous materials.

• Chop saw wheels are available for light horsepower chop saw machines of modern age light working.

• range of Extra thin wheels in less than 2mm thickness for precision easy cutting.

Features & Applications: • For notching, sheet metal cutting, pipe cutting

(CI/SS/MS) in Fabrication and pipe manufacturing industries, steel ingot & bar manufacturing industries

• For removing gate/riser in Foundries• For construction industries.

Tech Tips:• It is recommended that a cut-off machine

should have 1hp for every 25 mm of wheel diameter.

• Run wheel at the highest possible speed (marked on the wheel).

Zirkon

Spit Fire

Gemini

SiC

Bear

BDX

Cut-off Wheels

Grinding Wheels



T34

Flap Wheels

Description:• Size range from 100 mm

to 150 mm with different bore s ize and gr i t composition.

• Offering flap wheels for consistent performance and superior finish generation.

• range of flap discs for light stock removal, finishing & blending in one operation.

Features & Applications: • Tough aluminium oxide grain good for

medium to high pressure applications.• Specially coated design for controlled cutting

action with uniform finish.• High base adhesion for less grain shedding.• For polishing two wheeler and cycle rims,

grinding or deburring of metal channels, fillets, recesses or contours on metal components.

• Metal Fabrication and automotive weld and press shops.

Tech Tips:• Always observe safety recommendations.• Use sheet metal hood/guard.• Adequate exhaust system to be used at the

grinding area and at the idler pulley.• Check grinder spindle for run-out.• Don’t use coated discs that have excessive

curl.• Never use a coated disc in excess of the safe

operating speed of the proper back up pad recommended for the machine.

• Always check the core around a flap wheel or disc foe cracks or defects.

Norton

Norfibre

Description:

• Size range from 100 mm to 180 mm with different bore size and grit composition.

• Offering fibre discs for best performance in applications where rapid material removal is required.

• range of Fibre discs where surface finish is important and grinding pressures are low.

• fibre discs are best suited for wood working applications.


• Premium grade Zirconia Alumina abrasive which benefits in high cut rate, long lasting and cooler cutting.

• High strength backing results in tear resistant and no breakage.

• Unique coating process which gives uniform surface finish and less grain shedding.

• For use in Automotive weld shops, heavy fabrication (vessels, heat exchangers), aluminium casings, wood furniture and handicrafts.

Tech Tips:

• Select the coarsest feasible grit for the application.

• Keep the unused discs under weight once the polythene cover is opened.

• The disc should be at a 5° angle to the surface during sanding for most applications.

Zirkon

Alkon Gold Plus

Silkon-Wood Working

Coated Fiber Discs

Abrasive Disc



T35

Description:• Grit range from 120mm to

1000 with a pad size of 150x230mm.

• Offering hand pads for polishing, deburring, cleaning & finishing

Features & Applications: • Due to manufacturing from nylon, these pads

are flexible and can reach areas and conform to various shapes of the work piece.

• Non-loading and waterproof.• For rust removal, cleaning, blending &

finishing.

Tech Tips:• Ideal replacement for steel wool.• Substitute to fine waterproof paper.• Check grinder spindle for run-out.

Beartex

Non-Woven Pads

Description:• Standard length 10m and

width 0.15 m.• Offering rolls which

can be cut to required size for hand/machine sanding to suit a particular application.

Features & Applications: • Gentle action provides smoother working with

no change in work piece dimensionally.• Finishing o rolls in steel mills.• Finishing of SS furniture, kitchen equipments

and plywood in stroke sanding applications.

Beartex

Non-Woven Rolls

Diamond Blades

Description:• Dry Cutting Straight• 125x12x31.75,125x25x31.75

in 6mm and 10mm Width

Features & Applications: • General purpose, for fast cutting including

concrete masonry, brick, block, tile & stone.

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

05081054

05081055

05081056

5

5

5

Diamond Blades

Description:100x4x31.75, 100x25x31.75, 125x10x31.75,

Features & Applications: • General purpose for cutting

materials like brick, masonry, concrete.

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05081057

05081058

05081059

05081060

5

5

5

5

Diamond Blades

Description:• C Type Dry Cutting Med.

Diameter• 75x25x31.75,75x32x31.75

Features & Applications: • General purpose, for fast cutting including

concrete masonry, brick, block, tile & stone.

Part No

Part No

Pkg. Qty

Pkg. Qty

05081061

05081062

5

5

Cutting Blades



T36

Diamond Blades

Description:• Dry Cutting Continuous Rim

Turbo Blade• 100x6x31.75, 100x10x31.75,

150x6x31.75, 150x10x31.75, 200x6x31.75, 200x10x31.75, 200x12x31.75

Diamond Blades

Description:• Dry Cutting

75x32x31.75, 90x38x31.75, 100x40x31.75,125x42x31.75

Features & Applications: • General purpose/hard material.

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05081073

05081074

05081075

05081076

05081077

05081078

05081079

5

5

5

5

5

5

5

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05081080

05081081

05081082

05081083

5

5

5

5

Diamond Blades

Description:• Parting Wheel Thinner Type

100x1x31.75,100x0.8x31.75,150x1x1.75,150x1.2x31.75

Features & Applications: • General purpose cutting

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05081063

05081064

05081065

05081066

5

5

5

5

Diamond Blades

Description:• Small Type Grinding

Wheel15x10x6, 20x10x6,25x10x6, 30x10x12.7,40x10x12.7, 50x10x12.7

Features & Applications: • Concrete, masonry.

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05081067

05081068

05081069

05081070

05081071

05081072

5

5

5

5

5

5

Cutting Blades



T37

Diamond Blades

Description:• 125x0.6,125x0.8,125x1.1

Features & Applications: • Fast cutting, Electroplated

Bond gives extra strength for holding Grains.

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

05081091

05081092

05081093

5

5

5

Diamond Blades

Description:• Parting Wheels Dry Cutting

Size : 150x0.6, 150x0.8, 150x1.1, 200x0.6, 200x0.8, 200x1.1

Features & Applications: • Premium dry cutting diamond parting wheel

with single row segments for cutting a wide range of concrete & masonry materials.

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05081094

05081095

05081096

05081097

05081098

05081099

5

5

5

5

5

5

Diamond Blades

Description:• Wet Cutting Cured Concrete• 75x12x31.75, 100x12x31.75,

125x12x31.75, 100x18x31.75Special.

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05081084

05081085

05081086

05081087

5

5

5

5

Diamond Blades

Description:• Slitting Saws• 100x0.6,100x0.8,100x1.1

Features & Applications: • Cuts anything including

concrete, masonry, steel, wood, stucco, ductile iron, PVC pipe, cast iron, stone & brick, rubber, not for use on aluminum.

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

05081088

05081089

05081090

5

5

5

Cutting Blades



T38

HSS Parallel Shank

Description:• Drill Size: 1.0 - 20.0 mm

Features & Applications: • Drill provides more torque and axial force

to create hole.

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05080001

05080012

05080023

05080035

05080039

20

20

10

10

10

Description:• HSS Parallel Shank Jobber Drills• Size : 1.0-13mm, 1.5-6.5mm,1.0-10mm

set


to create hole.

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

05080040

05080041

05080042

5

5

2

Description:• Size: 3.0 - 16.0 mm

Features & Applications: • Stub Drill provides more torque and axial

force to create hole.

HSS Parallel Shank

HSS Parallel Shank

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05080046

05080053

05080064

05080077

20

20

10

10

Diamond Blades

Description:• Parting Wheel Dry Cutting• 250x1.1, 250x1.4, 250x1.6,

250x2.1, 250x2.6

Features & Applications: • For quick parting of hard

materials.

Diamond Blades

Description:• Slitting Saw • 300x1.1, 300x1.4, 300x1.6,

300x2.1, 300x2.6

Features & Applications: • Quality dry cutting diamond

blade mortar removal (tuck pointing), in brick or block mortar joints.

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05081100

05081101

05081102

05081103

05081104

5

5

5

5

5

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05081105

05081106

05081107

05081108

05081109

5

5

5

5

5

Cutting Blades



T39

HSS Taper Shank

Description:• HSS Taper Shank Drill• Size: 3 - 76 mm


to create hole.

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05080111

05080222

05080332

05080410

05080450

10

5

2

1

1

Description:• HSS Centre Drill• Pilot Dia : 1.0-10mm,

Body Dia : 3.1525.0mm

Features & Applications: • Provide starting hole for larger drill bit.

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

0508----

0508----

0508----

10

10

10

HSS Centre Drills

HSS Reamers

Description:• Sizes:3 – 50.80 mm

Features & Applications: • Mainly used in machining to make

existing holes dimensionally more accurate and to improve surface finish.

• Used in metal working areas of machining.

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05080451

05080468

05080498

05080523

05080539

10

10

5

2

1

Taps

Description:• Type: machine, hand, nut taps• Sizes: M1*.25 – M100*6

Features & Applications: • Mainly used in automotive industries

for machining purposes.

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05080540

05080558

05080574

05080586

5

5

2

1

Power Tool Accessories



T40

Description:• Shape: Conical • Size : AM1 – AM6

Features & Applications: • Used for finishing the rough area of

product manufactured.

WC Rotary Burs

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05080701

05080702

05080703

05080704

05080705

05080706

10

10

10

10

5

5

WC Rotary Burs

Description:• Shape: Cylindrical Radius End • Size : BM1 – BM6

Features & Applications: • Used for surface f in ishing of

Automotive parts.

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05080707

05080708

05080709

05080710

05080711

05080712

10

10

10

5

5

5

WC Rotary Burrs

Description:• Shape: Cylindrical • Size : CM1 – CM8

Features & Applications: • Used for finishing the rough area of

product manufactured.

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

05080713

05080714

05080715

05080716

05080717

05080718

05080719

05080720

10

10

10

10

5

5

5

5

Description:• Shape: Flame • Size : FM1 – FM3

Features & Applications: • Used for finishing the rough area of product

manufactured.

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

05080744

05080745

05080746

10

10

5

WC Rotary Burs




T41


Storage Equipment

Description:• Height: 300 mm• Material: Steel• Width: 600 mm• Capacity: 150 kg • Number of racks: 3 • Depth: 375 mm• Locking System: No

Features & Applications: • Heavy gauge steel construction, Quick\

release, ball-bearing track slides for convenient & fast drawer removal.

Tool Cabinets

Description:• Height: 300 mm• Material: Steel • Width: 300 mm• Number of Drawers: 3 • Depth: 375 mm• Locking System: Yes

Features & Applications: • Heavy gauge steel construction, Quick

release, ball-bearing track slides for fast & easier drawer movement.

Description:• Square Tool Bit• Size: 3 x 20 x 150mm-

20 x 25 x 150mm, T42

Features & Applications: • Tool bit with end bevel angle

of 15°.

HSS Tool Bits

Part No

Part No

Pkg. Qty

Pkg. Qty

05080742

05080743

10

10


Tool Cabinets


Description:• Height: 200 mm• Material: Steel • Capacity: 30 kg • Width: 425 mm • Depth: 200 mm• Locking System: Yes

Features & Applications: • Steel construction, ball-bearing track slide for

easy drawer removal.

Tool Box



WELDING &

MATERIAL HANDLING


LPS INDUSTRIAL SUPPLIESWELDING

W1

Welding Helmets & Eye Protection

Description:• Variable shade-Solar

Powered.• Available in thermoplastic &

fiber glass material

Features & Applications:• Light state shade - DIN 3 • Dark state shade - (DIN 9-13) • Step less regulation.• Filter Dimension =110 x 90 x 10 mm • Viewing area = 98 X 43 mm• Switching time: 1/20000s from bright to dark• Recovery time: 0.1s to 1.0s from dark to light. • Power supply - Solar cells• Auto power on/off.• Operating temperature = -5 to +55 C• Storage temperature = -10 to +60 C• Net weight - 450gms.

Auto Darkening Helmet


Description:• Variable shade-Battery

powered• Available in thermoplastic

& fiber glass material

Features & Applications:• Light state shade - DIN 3 • Dark state shade - (DIN 9-13) • Step less regulation • Filter Dimension =110 x 90 x 10 mm • Viewing area = 98 X 46 mm• Switching time: 1/20000s from bright to dark• Recovery time: 0.1s to 1.0s from dark to light. • Power supply = two AAA alkaline batteries

(min. lifetime is 1000 welding hours).• Operating temperature = -5 to +55 C• Storage temperature = -10 to +60 C• Net weight - 450 gms• Auto power on/off.

Auto Darkening Helmet

Description:• Size:3.25"X4.25",

4.5"x 5.25"• Type: Fixed shade helmets• Shade: Din 11/13

Features & Applications:• Adjustable ratchet head

gear.• No use of metal screw or rivets.• Light weight for welder’s comfort• Durable shell• Washable

Head Helmets


Description:• Window Size :

3.25"X4.25" , 4.5"x5.25"• Type: Fixed shade Lift

front helmets• Shade: Din 11/13

Features & Applications:• Lift front welding window.• Adjustable ratchet head gear.• No use of metal screw or rivets.• Light weight for welder’s comfort• Durable shell• Washable

Head Helmets





W2


Features & Applications:• Comfortable head gear ring with ratchet at back & adjustment at the top to fit on welders head.

Description:• Material : polycarbonate,

glass• Size : 3.25"X4.25",

4.5" X5.25"

Features & Applications:• Clear cover glass provides protection to the

dark glass against scratches, spatters etc.

Head Gear


Description:• Type: Fiber glass• Thickness : 1.5 , 3 mm• Colors : Clear , Blue, Green• Size = 6x9”,9x9”,9x12”

Features & Applications:• Welding screens in fiber

glass can withstand extreme hot temp.

• Provides protection to eyes, ears, face, neck & part of head from spatters during welding & cutting processes.

Welding Face Shields


Clear Cover Glass

Description:• Type: Thermoplastic,

Fiberglass• Shade: DIN 11

Features & Applications:• Hand held welding screens in PPE for

protection against light, heat & spatters to eyes, ears, face, neck & part of head during welding & cutting processes.

• It is durable & light in weight for welders comfort.

Welding Hand Shields

Part No

Part No

Pkg. Qty

Pkg. Qty

06010029

06010023

100

100

Description:• Type: Hardened glass,

Polycarbonate• Size:3.25"X4.25",4.5"x5.25"• Shade: DIN 9 – 13

Features & Applications:• The dark lenses provide protection against

the UV/ infrared light of welding arc.

Shaded Glass


Part No

Part No

Pkg. Qty

Pkg. Qty

06010030

06010037

10

10



W3


Safety Clothing & Blankets

Description:• Eye Cup• Type: Frame-Lift front• Soft PVC frames • 50mm lenses• Meets standard- ANSI-Z87.1

Features & Applications:• Welding goggles with head band and fixed

round black glasses which fits perfectly onto welders face.

• Give protection against welding radiations and external flying particles.

Welding Goggle


Description:• Premium quality combined

welder glove, Length 14”

Features & Applications:• Split leather cuff, 15cm in

length.• Excellent tear resistance.• Back and thumb in shoulder split leather.• Palm in natural cow grain leather.

Leather Gloves


Description:• Natural split welder

Features & Applications:• External reinforcement on

palm • Split leather cuff of 7cm in

length • Excellent tear resistance • Industrial handling and maintenance, metal

work, welding and related operations and related operations.

Economy Leather Gloves

Description:• Type: Frame-Net cup• Shade:5

Features & Applications:• Welding goggles - plain with net on the side.• Give protection against welding radiations,

Spatters and external flying particles.

Welding Goggle




W4


Description:• Leather bib apron,

size 24” x 36”

Features & Applications:• Split aprons with loop

around the neck and leather belts in the back.

• It is made from four pieces of side split leather. • Protect welders from heat, spatters, sparks

etc.

Leather Aprons

Part No

Part No

Pkg. Qty

Pkg. Qty

06020004

06020003

10

10

Description:• Premium quality leather• Available in russet split or

cow grain leather.

Features & Applications:• Welder jacket in split

leather.• Kevlar stitching.

Leather Jacket


Description:• PVC welding curtains• Color-Yellow/Dark

Green/OpaqueBlue/Red

• Size-1.4 & 1.8 X 50 Mtr Roll

• Thickness = 0.35 – 0.4 mm• Transparency = Zero, low, med, high

depending upon the color.• Comply with CN EN -1598 norms

Features & Applications:• Welding strips offer the same visual

protection as curtains but are used where mechanical load is heavy.

• They can be provided in 50 m rolls and cut to the desired lengths.

• UV resistant• The strips are self extinguishing & therefore

can withstand welding sparks.

Welding Strips

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

06020031

06020032

06020033

06020034

Opaque Blue

Dark Green

Red

Yellow

Description:• Sleeves for hand & foot• Leather, Cotton sleeves.• Available in russet split or cow

grain leather.

Features & Applications:• Welder arm guard.• Kevlar stitching.• Kevlar arm guards or sleeves in

split leather.• Elasticized band on the edges.

Sleeves

Part No

Part No

Pkg. Qty

Pkg. Qty

06020017

06020011

10

10



W5


Description:• Color - Yellow/ Dark Green/

Opaque blue/ Red• Thickness 2/3/4mm, Width

180cm• Table top curtain also

available• 22mm sq pipe frames• Comply with EN -1598 norms

Features & Applications:• Eyelets on 3 sides • Steel rings for hanging curtains• Side buttons for joining extension curtain• These economical & multi purpose curtains

comes ready to hang.• These can block most UV radiation,

dangerous blue light & reduce the visible flash from the welding arc.

• They also protect welders from the reflection of welding light.

• The curtains are self extinguishing & therefore can withstand welding sparks.

Welding Curtains

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

06020035

06020036

06020037

06020038

06020039

06020040

10

10

10

5

5

5

Description:• Welding curtain Frames.

Features & Applications:• Welding curtains can be

provided with frames of sturdy & heavy gauge steel s t r u c t u r e a s p e r t h e r e q u i r e m e n t s o f t h e customers.

• Sq 7/8” pipe frames.

Curtain Frame

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

06020041

06020042

06020043

1

1

1



W6


Welding Wires & Electrodes

Description:• ER 6013• Size: 2.5, 3.15, 4,5,

6.3 mm• Length = 350,

450mm• Confirms to AWS ER 6013.

Features & Applications:• It is mild steel, all position, general purpose

Electrode.• It operates on AC/DC Welding current &

works low on low voltage AC machines.• It deposits easily, producing medium to

shallow penetration.• Suitable for general fabrication, structural

steels, steel furniture & maintenance work where ease of operation & good bead appearance are required.

MS Electrode

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

06030001

06030002

06030060

06030061

06030062

06030027

06030028

06030029

06030034

06030035

6013

6013

Ferroking

Ferroking

Ferroking

Ferroarc

Ferroarc

Ferroarc

Ferrospeed

Ferrospeed

Description:• Fiberglass woven fabrics• Can be provided in

coated or uncoated for varying applications

• Coating is available in Silica, neoprene, graphite.

• Size = Available in 50m roll as well as sizes in 1M x 1M, 2M X 2 M

• Thickness = 0.8, 1.5mm

Features & Applications:• Welding blankets protects equipments from

spatters, sparks & molten metal’s.• The fabrics have a flame-retarding coating,

which also increases their mechanical strength.

• All these heat resistant fabrics are asbestos free and can therefore be used as an alternative for various asbestos-containing products.

• The blankets made from glass fiber can with stand temperatures up to 600 deg C & silica based blanket can with stand temperature up to 1100 deg C.

Welding Blankets

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

0602004406020045060200460602004706020048060200490602005006020051060200520602005306020054060200550602005606020057060200580602005906020060

50 M50 M50 M50 M50 M50 M50 M

5555555511



W7


Description:• ER 7018• Size: 2.5, 3.15,4.0mm• Confirms to AWS ER

7018.

Features & Applications:• Low hydrogen iron powder type electrode to

weld heavy restrained joints subject to dynamic Loading.

• Suitable for heavy structure, pressure vessels, boilers, earth moving equipments etc.

MS Electrode

Part No

Part No

Pkg. Qty

Pkg. Qty

06030004

06030005

1

1

Description:• Size:2.5,3.15,4.0 & 5 mm• Confirms to AWS : ER 308L-16, ER

309L-16, ER 310-16, ER 312L-16, ER 316L-16

• Rutile based heavy coated low carbon all position electrode

Features & Applications:• An extra low carbon Cr/Ni stainless steel

electrode to give excellent resistance to high temp.

• Cracking and corrosion resistant.• Resists scaling & oxidation up to 800C.• Suitable for AISI 301L, 302L, 304, 304L, 308,

308L and their equivalent SS grades.

S.S Welding Rods

Part NoPart NoPart NoPart NoPart NoPart NoPart NoPart No

Pkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. QtyPkg. Qty

0603000706030117060301170603000906030069060301000603009606030081

308309310316

E 308LE 309LE 310LE 316L

Description:• MS, S.S MIG wires• Size:0.8, 1.2mm• Al, Cu , Ferrous Wire• Confirms to AWS:ER 70S-6• UTS of joint-560 N/mm2 min.

Features & Applications:• A copper coated cold wire having excellent

combination of Mn & Si.• Its special characteristics are smooth flow &

minimal spatters. It permits high current with CO2 shielding gas.

• Suitable for MS, SS, CS & low alloy steel including structural steels with tensile strength up to 590N/mm2.

MIG Welding Wires

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

06030013

06030103

06030107

06030112

06030114

06030119

06030123

06030127

06030130

Ok autorod 16.10

Ok autorod 16.53

Ok autorod 16.13

Ok autorod 16.30

CCMW

Layered

N-layered

Marathon

Marathon



W8


Gas Apparatus

Description:• Flux available in liquid, powder &

rod form• All purpose, low temperature flux• Rods are 1 Mtr in length• Powder or liquid have plastic can

of different capacity.

Features & Applications:• Applications include all-surface brazing

applications, building up shafts and spindles, automotive, sculpture, jewelry, HVAC and general maintenance.

Gas Welding Flux

Description:• MS, SS Flux cored wires• Size: 1.2, 1.6, 2.0 mm.• Confirms to AWS : E 71/70/81/91/

T-1 & other related standards

Features & Applications:• It’s an all position flux cored electrode

designed for optimum performance when using with 100% CO2 gas as shield gas.

• Arc transfer is smooth & spatters are low. • Applications are - structures & steel frames in

construction, ship building, automobile industries, bridges etc.

Flux Cored Wires

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

060301400603014506030148060301510603015406030156

OK autorod 12.08LOK autorod 12.22LOK outorod 16.10OK autorod 16.13OK autorod 16.30OK autorod 16.53

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

0603011606030134060301350603013606030137

Rupatam ACastox

BronozotecticBrazotectic

Alotectic

Description:• Light weight• Fast heating• Extra long life

Features & Applications:• Used in electrical &

electronics circuit.

Soldering Iron

Part No

Part No

Pkg. Qty

Pkg. Qty

06040072

06040073

10

10

Description:• Nozzle mixing• Injector mixing• Cutting thickness -300mm

Features & Applications:• In new generation Nozzle mixing

technology, chances of flashback are very remote,

• Cuts MS up to 300mm thickness• SS lever for long life, SS tubes with

silver soldering for leak proof joints• Standard length is 500mm with right angled

head, extremely light weight & well balanced.

Gas Cutting Torch

Part No

Part No

Pkg. Qty

Pkg. Qty

06040003

06040002

1

1



W9

Gas Apparatus

Description:• Equal pressure, • Welding thickness 10mm

Features & Applications:• All metal robust body for low

pressure manual welding either with Oxy -DA, Oxy - LPG.

• Use a smaller size orifice on thinner material and a larger one on thicker material.

• Tips & injectors can be changed according to job thickness.

Gas Welding Torch

Part No

Part No

Pkg. Qty

Pkg. Qty

06040004

06040005

1

1

Description:• Mig torch Air – Gas cooled• Water cooled also available• Current range = 150, 250, 300, 360,

500 Amp.• Length = 3, 4,5 Mtr• Easy availability of spare parts• Compatible with almost every machine

Features & Applications:• Easy design help in faster cooling• Suitable for cable of dia ranging from 16,

25,35, 50, 70mm Square.

MIG Torch

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

06040051

06040058

06040065

06040053

06040060

06040067

1

1

1

1

1

1

Description: • Single stage• Gas: Oxygen gas, DA gas• Confirms to IS 6901-1988.

Features & Applications: • S i n g l e s t a g e p r e s s u r e

regulators with two gauges (showing both cylinder & outlet pressure)

• One piece forged brass body & bonnet.• Rugged body, longer life• In 1st stage Nylon reinforce Neoprene

diaphragm.• Fire retardant valve material.• Self closing pressure relief valve.• Large gauges with easy to read dials.

Gas Regulator

Description: • Type: Round cup Eco.• Type: 3 flint

Features & Applications:• Spark lighter for igniting the flame with

the help of a spark from the flint stones. • Economically designed.

Spark Lighter

Part No

Part No

Pkg. Qty

Pkg. Qty

06040068

06040070

50

50

Part No

Part No

Pkg. Qty

Pkg. Qty

06040013

06040016

1

1



W10

Gas Apparatus

Description: • Two stage• Gas: Oxygen, DA, Hydrogen.

Nitrogen, CO2, Argon gas• Confirms to IS 6901-1988.

Features & Applications:• Two stage pressure regulators

combining safety & rugged design

• One piece forged brass body & bonnet. • Rugged body, longer life• In 1st stage Nylon reinforce Neoprene

diaphragm.• In 2nd stage Nylon reinforce Neoprene

diaphragm. • Fire retardant valve material.• Self closing pressure relief valve.• Large gauges with easy to read dials. • Special design ensures outlet pressure

stability. Availability of spare parts.

Gas Welding Torch

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

06040012

06040018

06040023

1

1

1

Description:• Pin type LPG regulator.

Features & Applications:• Made from forged brass body meeting

highest safety norms.• Can be provided with / without meter.• Used in various industrial applications.

LPG Regulator


Description:• Flashback Arrestors• For Oxygen , DA gas Torch &

Regulator • Confirms to BS: 615, BIS: 11006,

DIN BN 730, ISO: 5175 class 1.

Features & Applications:• It stops the flame from burning

back up into the equipment and causing damage or explosions.

• The Flash Back Arrestors are made to international standards, need very little maintenance, and are small and light enough to be installed between the torch and hoses.

Flashback Arrestor

Part No

Part No

Pkg. Qty

Pkg. Qty

06040018

06040019

1

1

Description: • A, B type• Sizes 1/16,3/32,5/32,3/64,5/64,7/64• For use with Acetylene & Oxygen

gases as per applications.

Features & Applications:• Compatible with most commonly used

cutting heads.

Cutting Nozzle




W11

Gas Apparatus

Description:• RED colored hose pipe for

DA, BLUE colored hose pipes for Oxygen.

• Size: Dia- 6.3, 8,10mm.• Confirms to IS 447/ 1980.

Features & Applications:• Welding cable hoses manufactured with

natural & synthetic rubber with uniformity in thickness and double braided reinforcement with high tensile synthetic yarn.

Hose Pipes

Part No Pkg. Qty06040028 10 Mtr

Description: • 2 wheels, 4 wheels• 1 & 2 cylinder space

Features & Applications:• Heavy duty construction

with thick steel supports. • P o w d e r c o a t e d f o r

durability. • Heavy duty strap for holding of cylinders. • Safety feature include - No lift cylinder loading

& calculated balance point.

Cylinder Hand Truck

Part No

Part No

Pkg. Qty

Pkg. Qty

06040033

06050036

1

1

Description: • Flow meters• For Carbon di oxide / DA

gas

Features & Applications:• Sets the gas flow rate to

get the optimum quantity to get good weld deposit & prevents wasting of shielding gas.

• Easy to read graduations.• Solid brass piston & machined brass body.

Flow Meter




W12

Welding Cable & Accessories

Description:

• Extra quick connects• Size: Dia-25, 50, 70, 95 sq.

meters.


• Solid brass cam lock style cable connectors in

different sizes allows welders to quickly &

easily connect cables to the welding machine

or add extensions onto the existing cables

with a quarter of turn.• Hard rubber sheath give proper insulation &

heat resistance to connection. • It does not slip or disconnect when cables are

pulled. • Ideal for sites where lengths of the cable is

always changing.

Cable Connector

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

06060056

06060057

06060058

06060059

06060060

06060061

06060062

06060063

20

20

20

20

20

20

20

20

Description:

• Copper & Aluminum.• Size: Dia 16, 25, 35, 50,

70, 95, 120 sq.meter.• Confirms to IS -

9857/90.


• Welding cables, flexible, single core, bunched & stranded in highly conductive plain annealed copper wires/tinned wires.

• Highly conductive 99.9% pure copper wires used.

• The coverings are in TRS and HOFR where temperature does not exceed 60C for TRS & 90C for HOFR.

• The cable is insulated with vulcanized rubber by extrusion process to give waterproof and abrasion resistant finish.

• Thickness of covering varies with cross section of conductor.

Welding Cables

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

06060001

06060002

06060003

06060004

06060005

06060006

06060007

06060008

50 Mtr

50 Mtr

50 Mtr

50 Mtr

50 Mtr

50 Mtr

50 Mtr

50 Mtr



W13

Welding Cable & Accessories

Description: • Braided copper

shunt (Steel, Cu Jaw )• Screw type -heavy duty

(Brass)• Current: 400,600 amperes.

Features & Applications:• The steel/Cu jaw ground clamp is

economically priced for light duty welding.• The clamp has a copper shunt to provide

good conductivity.• The circular shaped jaw inserts help for

clamping onto irregular shapes. • A rugged protects the heavy duty spring.

Ground Clamps

Part No

Part No

Pkg. Qty

Pkg. Qty

06060025

06060036

20

20

Description: • Lugs(Solder on,

Mechanical, Hammer on)• Size:35,70,95 mm2

Features & Applications:• Welding lugs made from copper tubing has

stud hole. • The long barrel ensures easy tightening/

soldering of various types of welding cables.• Flared end makes it easy to insert the cable in

the lug.

Cable Lugs

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

06060043

06060048

06060053

500

150

150

Description: • Economy, Semi

insulated, fully insulated,Twister type.

• Current: 200, 300, 400,600 amperes.

Features & Applications:• Welding electrode holders are suitable for

manual arc welding with covered stick electrodes of length not more than 450mm.

• Jaw covers made of special fire retardant compound are spatter proof and have high impact strength.

• 200A suitable up to 3.15mm of electrodes, 300A suitable up to 4.00mm of electrodes, 400A suitable up to 5.00mm of electrodes and 600A suitable for all sizes of electrodes in 45, 90 & 180 degree angles.

Electrode Holder

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

06060009

06060012

06060016

06060019

06060021

06060023

20

20

20

20

20

20


LPS INDUSTRIAL SUPPLIESMATERIAL HANDLING

W14

Material Handling

• Chains & Chain Slings.

• Chain Pulley Blocks.

• EOT.• Electric Hoists(Wire

Rope & Chain).• Hydraulic Jack.• HOT.• Hydraulic Stacker.• Hydraulic Floor Crane.• Hydraulic Drum Lifter & Tilter.• Jib Crane.• Wire Rope & Manila rope pulley blocks.

Features • you can Carry 2500, 3000,

5000kgs at one shot. • Can lift 0.5 feet using

Hydraulic Pump. • polyurethane wheels

will not damage your floors

• Stocks Readily Available.

Hand Pallet Truck

S.No.

Part No.02040001

123456789101112

ContentPart No.

02040002Part No.

02040003

Rated Capacity (kgs)Fork width (mm)Fork length (mm)Min Fork Height (mm)Max Fork Height (mm)Steering Wheel (diaXmm)Load wheel (diaXmm)Weight (kgs)Under Clearance (mm)Overall Height (mm)Overall Length (mm)Lift (mm)

2500 520 115080

200180*7078*70

8034

11481535120

3000685

122080

20018*6278*7091/87

8011501600120

5000685

122080

200180*6278*7015085

11501600120

Features• Consistent in shape

& Dimension• Light-Weight yet

strong & Durable• Prevents

Microbiological Growth• Doesn’t absorb Water or Liquids• Easy to clean & handle

Pallets


Part No

02050016EOT

02060005EOT Crane

3 Ton

02030005Wire Rope

Part No Part No

Cranes

We have an extensive range of wheels to meet your specific need.Guide to choose a perfect wheel for your requirement.Things to identify• Load of the trolley• Trolley is Auto or Hand towed• Whether some noise is admissible or not.• Size or Drawing of the wheelWe deal in Rubber Bonded, Cast Iron, Poly Urethane, Poly Propylene Co Polymer (PPCP), Ultra High Molecular Weight HDPE (UHMW), Torolon & Nylon Wheel etc.

Castor Wheel

Part No

02010001 02010284 5 Set

Part No Pkg Qty


LPS INDUSTRIAL SUPPLIESMATERIAL HANDLING

W15

Material Handling

Weighing Scale

Part No

Capacity

Accuracy

Pan Size

Pkg Qty

03010196 to 200

1 kg to 2000 kg

0.1gm to 200gm

370 mm to 2200 mm

1 pc

Weighing Scale Categories:-• Table Top Scale • Crane Scale • Digital Platform Scale• Weighing Machine With Printer

Personal Lockers offer a space saving & safe storage of personal effects at factories, workshops, laboratories, colleges, research institutes and sports clubs.Made from prime quality CRCA steel with anti-corrosivetreatment.All locker doors have ventilating louvers for air circulation.Hanging rods in 1 & 2 Door locker models.Stands are also available in option of 1 locker, 2 locker or 3 locker combination and make cleaning of work area easyLabel holders are provided for easy identificationLockers can be provided with or without lock and can function as stand alone units or as amulti-unit configurationAvailable in 1 Door, 2 Door, 4 Door and 6 Door models in Prince Grey and Olive Green colours.

Industrial Locker

Part No Product

02060003 Locker 10 pcsPkg. Qty


'C' PARTS CONSTRUCTION &

NON STANDARD ITEMS

CONSTRUCTION &

NON STANDARD ITEMS


LPS INDUSTRIAL SUPPLIES'C' PARTS

CONSTRUCTION

C1

Road Safety Products

One piece construction traffic cones are ideal for putting your company logo or message. No Parking Cones, Danger Cones, Go Slow Cones etc are some of the options offered by us. You can always get your own message printed on our cones.

Traffic Cones

Part No Pkg. Qty

03010222

TrafficCones

03010221

FlexiblePost

Barriers

03010220

SpeedBumps

03010223

ConvexMirror

10 pcs

Part No Part No Part No

These flexible posts and spring posts are subjected to harsh flexibility tests surpassing 300,000 times. Also called spring posts, these have three bands of hi reflective tapes for night visibility.

Flexible Post Barriers

FC1

FC2

80x500mm

80x750mm

200mm

210mm

50mmx3lines

50mmx3lines

Orange

Orange

Black & Yellow color combinat ion for greater visibility. Rubber as a base material helps it in making better grip on the road. Moisture & temperature resistant. Instant installation with the application of epoxy and bolts. Modular design provides easy installation. No need to paint again & again due to pre-color, hence painting cost is NIL. Reflectors & Glass Elements provides better night vision. Provides much better comfort for passengers in the vehicles. The design on the speed Humps makes easy drainage of rain water. Any length of speed humps is possible as the design/sections are modular.

Flexible Post Barriers

Ideally used for blind spots at parkings, internal lanes etc. Convex mirrors are also used at toll booth collection centers and inside shops to get a greater view of surrounding area.

Convex Mirror

Model

FC45

FC60

FCO60

FC-80

FC-100

FC-120

Dia. (cm)

45

60

60

80

100

120

Type

Indoor

Indoor

Outdoor

Outdoor

Outdoor

Outdoor

Supplied with

wall mounted bracket






Viewing Distance

4 (Mts)

6 (Mts)

6 (Mts)

8 (Mts)

10 (Mts)

12 (Mts)

• Available in various sizes, width and finishes.

Color Brush

• 100% cotton.• Used for l in ing &

leveling purpose.

Cotton String

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

03010133

03010134

03010135

03010136

03010137

03010138

03010139

10

10

10

10

10

10

10

Part No Pkg. Qty03010020 5 Roll


'C' PARTS

CONSTRUCTIONLPS INDUSTRIAL SUPPLIES

C2

Construction Products

• Forged in one piece from High Carbon Steel

• Protective coating of paint • The eyes or sockets of the Hoes

are round in shape • Nominal diameter of 45 mm at

the narrow end to grip the handle firmly

Spade

Part No

Part No

Pkg. Qty

Pkg. Qty

03010006

03010007

50

50

• Size: 10” & 12”• Flat type chisel.• Used in various construction and

engineering applications.

Chisel

Part No

Part No

Pkg. Qty

Pkg. Qty

03010016

03010017

10

10

• The working ends of all Pick-Axes heat treated.

• Chisel ends and point ends are sharpened.

• High strength : unbeatable resistance to deformation and bending

• The eyes or sockets of Pick-Axes are oval in shape and are slightly tapered to about 65 mm × 40 mm at narrow end to grip the handles firmly.

Pickaxe

Part No

Part No

Pkg. Qty

Pkg. Qty

03010006

03010007

50

50

• Available in wooden handle, plastic handle & steel handle.

Hacksaw Frame

Part No

Part No

Pkg. Qty

Pkg. Qty

03010038

03010039

5

5

• Cross Pin Hammer with wooden handle

• Weight-1/2kg, 1kg, 1.5kg, 2kg, 3kg, 4kg, 5kg, 10 kg.

Hammer


• Widely demanded in the construction of buildings.

• Very durable in withstanding the extreme weather conditions.

White Cement

Part No Pkg. Qty03010042 50 Kg

• Highly durable & reliable.

• Used in construction sites for movement /transportation of essentialmaterials.

• 1 & 2 wheels options.

Wheelbarrow




C3

• Good resistance to all usual fluids, gases, chemicals.

• Medium strength.• Great bonding strength to

woods, Plastic• Solvent less.

Fevicol

• Material : Galvanized M.S. Sheet (Heavy Duty)

• Can be utilized to store s a n d o r w a t e r f o r emergency situations.

Cotton String

• 15 Ltr capacity• High durability and

resistant efficiency.

G.I. Bucket



Part No Pkg. Qty03010026 15 kg

• Size: 1 meter x 2 miter• Main features are

Easy to Fabricate, L i g h t W e i g h t , Outstanding Printability, Fine Cell Structure, Low Flammability, Non Warping, Non Corrosive, Non Toxic, and High Impact Strength.

• Suitable for Cutting, Sawing, Shearing, Punching, Drilling, Milling, Riveting, Screwing,

• Painting, Printing, Photo Mounting, Bending, Engraving.

Foam Sheet

• Plastic with Acrylic box• Savlon Antiseptic solution

50ml-1• Eye Dressing Pad Sterile-1• Cotton Wool 25gm-1• Sterile Dressing 18x18 cms-1• Sterile Dressing 12 x 12 cms-1• Sterile Dresssing 7.5 x 7.5 cms-1• Disposable gloves (Pair)1• Eye Wash Solution-2• Roller bandage 10cm x 3mts-1• First Aid Booklet-1• Burn/Combine Dressing-1• Gauze Pad 5 x 5cm-3• Gauze Pad 10 x 10 cm3• Wound washer (Swab)-5• Round Plaster-10• Rectangle Plaster-10• Scissors-1• Instant Cold Pack-1• Adhesive Plaster-1• Breathing Mask-1

First Aid Box



Non Standard Items



C4

Non Standard Items

• Size: 1", 1 1/2", 2", 2-1/2",3", 4", 5"

• Material: steel • Surface treatment: zinc-plated.

J-Hook

• Density as on customer requirement

• 250 GSM• Material: HDPE cloth +

LDPE laminated.• Feature: Tear proof, water proof, rope

reinforced hem, heat sealed edges, U.V. metal grommets, fire retardant.

• Application: Furniture cover, car cover, canopy, tent floor, bag material.

L.D.P.E. Tarpaulin

Features: Materials: Special grade gypsum powder, Methy l Cellulose (HPMC), retarder.• Strong binding force • High tensile strength• It is the best adhesion agent and seam filling

material for fiber plaster decoration products.

Lime Powder




Product Feature:• Bright Chrome Plating• Material : Mild Steel

M.S. Aldrop 10''


Bricklaying Trowels With• Hardwood handle.• Ground and polished blade

made of Carbon steel.

Karni (Trowel)

Part No

Part No

Pkg. Qty

Pkg. Qty

03010004

03010005

10

10

• An implement used for sweeping, usually consisting of a bunch of twigs, straw, or bristles bound together andattached to a stick or handle.

Broom

Part No

Part No

Pkg. Qty

Pkg. Qty

03010012

03010013

20

20

• Use-fire fighting, agricultural use, industrial use, transport liquid ship use.

• Use in agriculture, irrigation & watering.

• Size- 2”, 2-1/2”, 3”, 4”

Canvas Hose Pipe



C5

• 25mm sq to 400 mm sq.• Material- Steel• Style- Multi purpose.• Application-Stripping,

cutting, crimping, and looping wire; Cutting bolts.

Crimping Tool


• Material- Stainless steel• All weather resistance

EPDM, free from leak quality.

Cup Washer

Part No Pkg. Qty03010021 10 kg

• Widely used in various industrial sector for welding, cutting, heating and brazing activities.

• Available for transferring all major types of gases like: Oxygen, Acetylene, Argon, Nitrogen, Hydrogen, Carbon di-oxide.

Gas Pressure Regulator

Part No

Part No

Pkg. Qty

Pkg. Qty

03010024

03010025

1

1

• Size: 6” to 10”• M.S handle , S.S handle

D Handle


• Capacity: 200gm, 5 0 0 g m , 1 , 5 & 20Kg

• Sturdy construction designed for use in daily maintenance work.

• Air can be released by half turn of the head assembly.

Grease Gun

• Available in various sizes.• Used with mild steel rods and

provide a cheap, effective clamping system.

Gogo Rapid Clamp

• Fabricated with high carbon steel, alloy steel and other class metallic products.

Hacksaw Blade


Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

03010031

03010032

03010033

5

2

1

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

03010035

03010036

03010037

1

1

1

Non Standard Items



C6

• Bright M.S. Iron• Fixed Pin w/out Screws• Different sizes

M.S. Hinges 3”

• Made by grinding marble.• Used in glass industry,

Construction industry.

Marble Powder

• Excellent covered• Easy to tear• Suitable for bundling &

sealing

Masking Tape



Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

03010054

03010055

03010056

20

20

20

• Used for measuring diesel & oils

Measuring Cane

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

03010057

03010058

03010059

03010060

03010061

5

5

5

5

5

• Different sizes starts with the width of 2mm to 36mm.

Nylon Rope

Manila Rope


Nylon String



• Over coat type rain coat with followingfeatures:

• Color fastness• Smug fit• Neatly stitched• Pant-Shirt type overcoat with

following features: • Tear resistance• Weather resistance• Flawless finish

Rain Coat

Part No

Part No

Pkg. Qty

Pkg. Qty

03010066

03010067

5

5

Non Standard Items



C7

Our liquid rubber adhesives serve variety of applications like:• Wood bonding, Footwear,

Furniture, Floor Carpeting, AirConditioning, Luggage bonding.

Rubber Adhesives

Part No

Part No

Pkg. Qty

Pkg. Qty

03010068

03010069

1 Ltr

5 Ltr

• Chemical formula FE2O3• Used in paint, Plastic, rubber,

pigment in tiles, ceramicsproducts.

Red Oxide

Part No

Part No

Pkg. Qty

Pkg. Qty

03010070

03010071

15 Ltr

15 Ltr

• Size: 60 No, 80 No., 100 No.

Sand / Emery Paper

Part No Pkg. Qty03010075 1 Rim

• Used for lifting, lowering, traversing and swinging applications.

• Adoption to all kinds of applications is possible due to wide range of models and large range of lifting forces.

• Lifting capacity : Wide range

Screw Jack

• Size: Available in various sizes

Wooden Screw

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

03010076

03010077

03010078

03010079

03010080

03010081

03010082

1000

1000

1000

1000

1000

1000

1000


• 3mtr,5mtr,10mtr,5mtr, 30mtr,50mtr.

• High carbon steel blade coated with acrylic polymers for long life.

• Ergonomically designed case reinforced for maximum strength & durability.

• Built-in shock absorber to protect blade end hook for long life.

• Durable steel belt clip.

Steel Measurement Tape

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

03010085

03010086

03010087

03010088

03010089

03010090

10

10

10

10

5

5

Non Standard Items



C8

• Used for packaging in various industries.

• Available in double, triple, five layer waterproof from both sides and is an e x c e l l e n t m e d i u m f o r packaging.

HDPE Tarpaulin Sheets


• Size : ¾” x 12 mtr• Commonly used commercially

in pressurized water systems, central heating systems, air compression equipment and thread joints.

Teflon Tape


• Size: 10”• Designed to

perfection these bolts have excellent finish and edge and

• finds wide application in furniture industries.

Tower Bolts


• The Industrial Paint Thinner offered by us is manufactured using advanced techniques that ensure effective result in diluting all types of industrial paints.

Paint Thinner

• 4.00 mt Cap• Turn buckles are been

manufactured with high quality mild steel.

Turnbuckle

Part No Pkg. Qty03010140

• Available good qualityturpentine which is a fluidobtained by the

• complex distillation of resin obtained from trees mainly

Turpentine


Part No Pkg. Qty03010092 10 Ltr

• These brass wire brushes have long bristles made up of plastic, which are hard in texture.

• Commonly used for cleaning floor and other hard surface. The brushes come with plastic handle, which makes it easy to use.

Brass Wire Brushes


Non Standard Items



C9

• Product USP- Moisture proof, Non aging properties etc.

Brown Tape

Part No Pkg. Qty030100121 1 Box

Safety Net


• Safety nets made from nylon and polypropylene.

• They provide complete safety netting and fall protection solutions for any kind ofconstruct ion work reducing the causalities and injuries that occur due to construction accidents.

• The nets are designed of high tenacity synthetic mesh that meets the harsh construction demands.

• Net3’’, 4mm, 12mm (Breaking Strength Str. 2000Kg)

Properties: • ISI marked • Heat, oil, fluid resistance• Saving of 40% operation

cost • Works at high temperature.

Copper Welding Cable

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Part No

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

Pkg. Qty

03010125

03010126

03010127

03010128

03010129

03010130

03010131

03010132

50 Mtr

50 Mtr

50 Mtr

50 Mtr

50 Mtr

50 Mtr

50 Mtr

50 Mtr

Non Standard Items



C10

Environment Friendly Products

Spill Kits Spill Kit Type: Haz Mat Aggressive Spill Kit Applications: Marine & Industrial Includes 100 Pads, 4 Booms, 10 Pillows, 1 Pair Goggles, 1 P a i r G l o v e s , 1 Disposable Bag, 95 Gallon Over pack Drum Trade.

Spill Containment

Part Code Product

03020201 Spill Containment 1 PackPkg. Qty

Liquid Drain CleanersApplications: Grease Trap and Septic Tank Maintenance Formula Type: Biodegradable Cleaner and Degreaser Container.

Degreaser

Part Code Product

03020101 Degreaser 1 PackPkg. Qty

Reclaim - Extra Heavy-Duty Liners Type: Flat Bottom Can Liner Maximum Volume 60 Gal. Thickness (mil): 1.6500 Height: 58 Width: 38 Material 1 Pack = 100 Pcs

Part Code Product

03020001 Storage Bags 1 PackPkg. Qty

Can Linear or Storage Bags

High Gloss; Low Maintenance Floor Finish for Resilient Flooring. Contains No Heavy Metals or Pthalates Formula Type: Floor Finish

Floor Cleaners

Part Code Product

03020301 Spill Containment 1 PackPkg. Qty


CHEMICAL


LPS INDUSTRIAL SUPPLIES

C11

lps industrial supplies service your needs for maintenance ... catalogue.pdf · our objective is to...

Documents