1

2

LT6-

SERI

ES

Multiquip’s LT6-Series Light Towers are the perfect choice for job and event site illumination. The unit fea-tures a compact footprint and built in fork-lift pockets to ensure easy transportation and storage. Also, the trailer assembly is engineered to meet DOT regulatory requirements and provides full fluid containment to prevent fluids from contaminating the environment. Besides providing high lumen metal halide lighting, the engine/genset offers additional electrical power through convenient auxiliary receptacles located inside the cabinet.

LT6K FEATURES• Lamps - (4) 1000W Metal Halide• Lumen Output - 440,000• Lamp Connections - 3-pin quick disconnect• Lamp Design - heavy steel/aluminum construction with heat sink• Engine - KOHLER Tier 4 Final diesel• Engine Power - 3-cylinder, 12HP at 1,800 RPM• Engine Efficiency - 30 Gallon tank / 64 hour run time at 3/4 load• Mast Design - telescoping (32’) w/zinc dichromate plating• Mast Operations - 360° rotation w/locking pin• Generator Specifications - 120/240V 60Hz (±6% regulated)• Generator Design - brushless, 6kW AC continuous operations• Light Tower Design - full fluid containment• Light Tower Support - (4) heavy-duty outriggers and adjustable jack stands• Auxiliary Electrical Connections - (2) GFCI 120VAC 15A, (1) 120/240VAC 25A• Trailer Design - DOT certified - wind stability 65 MPH w/ outriggers• Light Tower Sound Signature - 68 dBA at 23’

All standard LT6-Series features• (4) Metal Halide lamps • Kohler Tier IV diesel engine• (1) Schuko 250VAC 16A receptacle• Full specifications - page 8

LT6K5LT6-Series is available in a 50Hz configuration with 230V auxiliary receptacles.

3

LT6-

SERI

ES

The LT6-Series is outfitted with key design features that assure reliable performance in all types of demanding applications. The rugged DOT certified trailer, compact steel shell lamp design, and plated telescopic mast assembly all support the rigors and climates these towers are caused to operate.

The LT6-Series offers a simple and easy method of lamp connections through 3-pin quick disconnect couplers. This design permits expedient troubleshooting of lamps as well as fast set-up for optional GloBug diffused lighting systems that require connection to the electrical ballasts.

The LT6K offers a versatile control box that features: an Hour Meter, (1) NEMA L14-30R twist lock 120/240VAC 30A receptacle, (1) duplex GFCI 120VAC 15A receptacle, support circuit breakers, and panel light.

Ease of control panel operations, scheduled maintenance, and service-ability is supported by oversized (20”x41”) access doors with lockable door handle and hood locking latches.

The LT6-Series provides a fuel efficient KOHLER liquid cooled diesel en-gine, low decibel signature, compact unit footprint to maximize flatbed transportation, and full fluid containment tub design.

LAMP CONNECTIONS

CONTROL PANEL

SERVICEABILITY

ENVIRONMENTALLY AWARE

Multiquip GB2000 shown mounted

4

MLT

-SER

IES

- MO

DEL

MLT The MLT (Modular Light Tower) provides an extremely flexible mobile platform to provide job-site

lighting; plus, allows for included support generators and generator-welders to permit self-sustaining operations. The MLT provides four 1000W Metal Halide lamps, telescopic mast assembly, 30 gal-lon fuel tank, mounted on a DOT certified trailer. This unit has the electrical plumbing necessary to tie into an electrical power source for lighting operations. Once a generator or generator-welder is added to the frame, the unit can now be operated in remote environments and provide additional electrical support.

MLTFEATURES• Lamps - (4) 1000W Metal Halide• Lumen Output - 440,000• Lamp Connections - 3-pin quick disconnect• Lamp Design - heavy steel/aluminum construction with heat sink• Mast Design - telescoping (30’) w/zinc dichromate plating• Mast Operations - 360° rotation w/locking pin• Light Tower Design - provides platform for generator placement• Light Tower Electrical Design - NEC/NEMA certified L14-30P plug• Trailer Design - DOT certified - wind stability 45 MPH w/o generator• Mast Design - collection tube for greater coil cord protection• Trailer Design - ballast compartment built into the trailer for security• Trailer Design - industrial torsion-spring axles to minimize road vibration• Trailer Design - zinc dichromate plated outriggers to resist corrosion• Trailer Design - built-in 30 Gallon fuel cell• Light Tower Design - provides platform for generator placement• Light Tower Electrical Design - NEC/NEMA certified L14-30P plug

Each floodlight requires a ballast for starting. They are built into the tongue of the trailer in an easy to service weather resistant compartment. An internal fan ensures proper cooling. The light control panel is positioned outside the compartment and contains (2) single-pole 20A ON/OFF circuit breakers.

The MLT connects to a line power or to a generator through a 125V/150V, 30A L14-30P twist lock plug.

360˚Mast rotation

5

MLT

-SER

IESThe MLTDA7 represents a revolutionary concept in light tower design. The versatile nature of this modu-

lar unit permits 440,000 lumens of lighting and external electrical power operations via the trusted Multiquip DA7000SSA1 genset. Mounted on a rugged mobile DOT certified trailer, and equipped with a 30 gallon fuel tank, the MLTDA7 can provide lighting operations for 48 hours. Further, the light tower mast assembly can be removed from the trailer frame to provide a compact towable generator package.

MLTDA7FEATURES• Lamps - (4) 1000W Metal Halide• Lumen Output - 440,000• Lamp Connections - 3-pin quick disconnect• Lamp Design - heavy steel/aluminum construction with heat sink• Engine - KUBOTA Tier 4 Final diesel• Engine Power - 11.9HP at 3,600 RPM• Engine Efficiency - 30 gallon tank; 48 HR run time at 3/4 load• Mast Design - telescoping (30’) w/zinc dichromate plating• Mast Operations - 360° rotation w/locking pin• Mast Design - collection tube for greater coil cord protection• Generator Specifications - 120/240V 60Hz (± 2.5% regulated)• Generator Design - brushless, 7kW AC class F• AUX Electrical Connections - (2) GFCI 120VAC 15A , (1)• Trailer Design - DOT certified - wind stability 72 MPH w/ outriggers• Trailer Design - ballast compartment built into the trailer for security• Trailer Design - industrial torsion-spring axles to minimize road vibration• Trailer Design - zinc dichromate plated outriggers to resist corrosion • Trailer Design - built-in 30 Gallon fuel cell• Light Tower Sound Signature - 65.7 dBA at 23’• Light Tower Electrical Design - NEC/NEMA certified L14-30P plug

DA7000SSW1 Receptacle Panel

6

MLT

- SER

IES One of the most versatile investments in the towable lighting market is the Multiquip

MLTSDW7. This modular unit features the premium SDW225SSA1 welder/generator, and four metal halide lamps on the Modular Light Tower (MLT) frame. This combination provides a mobile, three-in-one multipurpose unit ready to provide light, electrical power, and welding operations. As a welder, this unit provides outstanding arc characteristics for constant current (CC) or constant voltage (CV) operations. As a gen-erator, the operator is afforded 6kW 120/240V 50/25A continuous power with exceptional ±2% volt-age regulation. The MLTSD7 is supported by an industrial DOT approved trailer with 30 gallon fuel capacity.

MLTSDW7FEATURES• Lamps - (4) 1000W Metal Halide• Lumen Output - 440,000• Lamp Connections - 3-pin quick disconnect• Lamp Design - heavy steel/aluminum construction with heat sink• Engine - KUBOTA Tier 4 Final diesel• Engine Power - 11.9HP at 3,600 RPM• Engine Efficiency - 30 gallon tank; 48 hour run time at 3/4 load• Welder Model - Whisperweld SDW225SSA1• Welder Range - [CV] 200A 15-28V, [CC] 200A 50-225A• Welder Duty Cycle - 200A - 100%• Mast Design - telescoping (30’) w/zinc dichromate plating• Mast Operations - 360° rotation w/locking pin• Mast Design - collection tube for greater coil cord protection• Generator Specifications - 120/240V 60Hz (± 2.0% regulated)• Generator Design - brushless, 6kW AC class F• Auxiliary Electrical Connections - (2) GFCI 120VAC 15A, (1) L5-30R 25A• Auxiliary Electrical Connections - (1) L14-30R 25A• Trailer Design - DOT certified - wind stability 72 MPH w/ outriggers• Trailer Design - ballast compartment built into the trailer for security• Trailer Design - industrial torsion-spring axles to minimize road vibration• Trailer Design - zinc dichromate plated outriggers to resist corrosion• Trailer Design - built-in 30 Gallon fuel cell• Light Tower Sound Signature - 68.7 dBA at 23’• Light Tower Electrical Design - NEC/NEMA certified L14-30P plug

ALL-IN-ONE - The MLTSDW7 is the industry’s only light tower offering the versatility of a premier generator plus high quality CC/CV welding capability.

MLTSDW7Receptacle Panel

7

MLT

-SER

IES

- SPE

CIF

ICA

TIO

NSModel MLT MLTDA7 MLTDAC7 MLTSDW7

Engine

Engine Manufacturer N/A Kubota Z482 Kubota Z482 Kubota Z482

EPA/Tier N/A Tier 4 Final Tier 4 Final Tier 4 Final

Cylinders N/A 2 2 2

Family N/A 8KBXL.7 19KCC 8KBXL.719KCC 8KBX L.719KCC

Horsepower N/A 12.5 12.5 12.5

Rated Speed- RPM N/A 3600 3600 3600

Engine protection N/A High temp/low oil High temp/low oil High temp/low oil

Vibration isolation N/A Yes Yes Yes

Manifold exhaust direction N/A Up Up up

Sound Level dB @ 23ft N/A 65.7 65.7 65.7

Fuel Tank

Fuel Capacity-gal (ltr) 30 30 30 30

Running time-hr N/A 48 hrs @ 3/4 48 hrs @ 3/4 48 hrs @ 3/4

Fuel consumption Gal. hr N/A 0.625 0.625 0.625

Fill Neck opening 2 “ 2” 2” 2”

Fuel Pump N/A Mechanical Mechanical Mechanical

Trailer

Axle Capacity 2000 lbs. 2000 lbs. 2000 lbs. 2000 lbs.

Tire size 13 in. 13 in. 13 in. 13 in.

Standard Hitch Type 2” Ball 2” Ball 2” Ball 2” Ball

Support points 4 4 4 4

Suspension Type Torsion spring axle Torsion spring axle Torsion spring axle Torsion spring axle

Generator

Excitation N/A Brushless Brushless Brushless

Model N/A DA7000SSA1 DA7000SSA 1 SDW22 5SSA 1

Insulation N/A Class F Class F Class F

Wattage (KW) Max. N/A 7000 7000 7000

Wattage (KW) Cont. N/A 6000 6000 6000

Voltage N/A 120/240 120/240 120/240

Frequency-Hz 60Hz 60Hz 60Hz 60Hz

RPM N/A 3600 3600 3600

Regulation ± N/A ± 2.5% ± 2.5% ± 2%

Control Panel

Individual breakers/Light No No No No

Hour meter N/A Yes Yes Yes

Cabinet Night Light N/A N/A N/A N/A

Lights

Color Bright White Bright White Bright White Bright White

Lamps (4) 1000W Meta Halide

(4) 1000W Metal Halide

(4) 1000W Metal Halide

(4) 1000W Metal Halide

Dimensions

L x W x H (Inches) 173 X 50 X 70 173 X 50 X 70 173 X 50 X 70 173 X 50 X 70

Mast Deployed 30 Feet 30 Feet 30 Feet 30 Feet

Weight DRY (lbs) 1062 1588 1588 1768

Notes Modular Light Tower Frame/Lights only

Generator meets CSA requirements

29228

29369

HITCHESMLT-Series Light towers ship with an adjustable 2” Ball Hitch (29228) mounted to the tongue. Optional 3” pintle hitch mount kit (29369) is available.

Standard Hitch

Accessory Hitches

8

All features and specifications are subject to change without notice.Rev. 0715

Your Multiquip dealer is:

Connect with us on

SPEC

IFIC

ATIO

NS

Standard Hitch

Accessory Hitches

#29546

#34953

#34960 (2 5/16”)

#34959 (2”)

#34958

LT6-Series light towers ship with a 2” Ball hitch coupler (29546) mounted to the tow bar.

Optional accessories:Fixed Pintle (34953)Height Adjustable 2” Ball (34959) 2 5/16” Ball (34960) Pintle (34598)

Model LT6K LT6K5

Engine

Engine Model Kohler KDW 1003 Diesel Kohler KDW 1003 Diesel

Family DKHXL1.37SF2 DKHXL1.37SF2

EPA/Tier Tier 4 (F) Tier 4 (F)

Engine Start Electric Electric

Battery (Standard type) Group 24 - 550 CA Group 24 - 550 CA

Cylinders 3 3

Displacement 62.73 cu.in. (1,028 cc) 62.73 cu.in. (1,028 cc)

Horsepower @ 1,800 RPM 12 12

Rated Speed-RPM 1800 1,500

Engine Protection High Temp / Low Oil High Temp / Low Oil

Vibration Isolation Yes Yes

Oil Sump Capacity 2.64 US qts. (2.5 liters) 2.64 US qts. (2.5 liters)

Engine Cooling Liquid 5.18 qts. (4.9 liters) Liquid 5.18 qts. (4.9 liters)

Manifold Exhaust Direction Rear of Cab Rear of Cab

Sound Level dB @ 23 ft. 68 dB 68 dB

Fuel Tank

Fuel Capacity (Usable) 30 gal. 30 gal.

Running time-hr. 64 hrs. @ ¾ 64 hrs. @ ¾

Fuel Consumption 0.47 gal./hr. 0.47 gal./hr.

Fill Neck Opening 3” 3”

Fuel Pump Mechanical Mechanical

Trailer

Axle Capacity 2,000 lbs. 2,000 lbs.

Tire Size 13 in. 13 in.

Standard Hitch Type 2” Ball 2” Ball

Support Jacks (4) - 2,000 lb. Rating (4) - 2,000 lb. Rating

Suspension Type 4-Leaf Springs 4-Leaf Springs

Tail Light Connector 4-Pin 4-Pin

Generator

Generator Mecc Alte Mecc Alte

Model LT 3N-100/4 LT 3N-130/4

Type Brushless Brushless

Insulation Class H Class H

Phase Single Single

Wattage (KW) Max. 7000 7000

Wattage (KW) Cont. 6000 6000

Voltage 120/240 240

Amperage 50/25 25

Frequency-Hz 60Hz 50Hz

RPM 1,800 1,800

Regulation ± ± 6% ± 6%

Control Panel

Individual Breakers/Light & Power Yes Yes

External Receptacle (2) 120VAC 15A (1) Schucko Receptacle 250V/20A

External Receptacle (1) Twist Lock 120/240VAC [50A/25A]

Hour Meter Yes Yes

Lighting

Construction Solid Aluminum Shell w/ Heat Sink Fins

Solid Aluminum Shell w/ Heat Sink Fins

Lamps (4) 1,000W Metal Halide (4) 1,000W Metal Halide

Bulb Shock-Mounts Yes Yes

Lumens 440,000 440,000

Color Bright White Bright White

Light Coverage 5-7 acres 5-7 acres

Lamp Connection 3-Pin Quick Disconnect 3-Pin Quick Disconnect

Wind Capacity 65 mph. 65 mph.

Mast

Construction Anti-Corrosion Zinc Dichromate Coated

Anti-Corrosion Zinc Dichromate Coated

Sections 4 4

Rotation 360° 360°

Positive Mast Position Locking Yes Yes

Telescoping Length (MAX) 32 ft. 32 ft.

Winch Operations (2) Mechanical 1,500 lb. Capacity

(2) Mechanical 1,500 lb. Capacity

Cabinet

Tub Design Total Fluid Containment Total Fluid Containment

Cabinet Night Light Yes Yes

Service Doors (2) Lockable Latch w/Door Stays

(2) Lockable Latch w/Door Stays

External Power Cord(s) Access Yes Yes

Dimensions

L x W x H (Operational) 128” x 79” x 378” 128” x 79” x 378”

Weight DRY (lbs.) 1,492 lbs. 1,492 lbs.