Lythic™ Solutions for Polished Concrete

The Difference in Densifiers™

Polishing concrete goes to the next level with Lythic Solutions’ Lythic™ Densifier. This next-gen concrete hardener

and densifier leverages all the advantages of polished concrete flooring – economical, sustainable, durable, design

versatility, low-maintenance, high-performance – and delivers them faster, better and greener.

Lythic is the first line of products that uses Colloidal Silica to speed, simplify, and improve concrete polishing and

floor maintenance. It has been proven in use on hundreds of thousands of square feet of concrete floors since 2004.

www.lythic.net

TM

Why Colloidal Silica?The Colloidal Silica in LythicTM Densifier penetrates quickly, deeply, and cleanly into concrete. The nano-size particles in Lythic Densifier are highly reactive in concrete – far more reactive than conventional densifiers. They form cementitious compounds that harden and densify the surface with less wait and less waste. Lythic Densifier with Colloidal Silica means increased speed, economy, uniformity, and density.

A Sustainable ShinePolished concrete is an environmentally friendly floor finish: It eliminates the resource-consumption required to make (and periodically replace) applied floor coverings. It outlasts most floor coverings. This also eliminates the volatile organic compounds (VOCs) that most floor coverings and adhesives emit. And it eliminates the indoor air quality problems due to strippers, waxes, sealers, and polishes needed to maintain other types of floor finishes.

Conventional densifiers are silicate-based products; they are highly caustic, difficult to handle and form a chemical slurry by-product that requires disposal as a hazardous material. Lythic Densifier, however, has a lower pH, so it is safer to handle, penetrates concrete quickly, and does not leave a dangerous residue. Lythic Densifier has zero VOCs and contains no harsh chemical solvents. It is shipped as a concentrate, reducing transportation-related energy consumption.

Hard Made Easy™

Lythic Densifier applies more quickly and easily than other products. It does not have to be scrubbed into the surface, and it does not produce a slurry or gel that has to be scrubbed off. And since there is no residue to remove, there is no need to rinse the surface after treatment, and no waste disposal problem.

Faster is BetterLythic Densifier’s fast-reacting formulation eliminates the overnight wait required with conventional densifiers. Slab polishing can begin just one hour after Lythic application, often allowing complete same-day densifying and polishing. This translates into savings on labor, equipment, and disposal costs. Lythic gets the job done sooner, speeds construction schedules, and minimizes business disruptions in existing facilities.

Ask The ExpertsLythic Densifier was created by experienced concrete polishing contractors who were looking for a better way to do their job. Other polishing professionals who’ve tried Lythic Densifier agree that it saves time and money, and gives them a better result:

Lythic cuts steps and thereby reduces labor costs. – Jason Valenta, Preferred West.

I can start polishing as soon as it’s dry, cutting a lot of time. I get better results, especially when refinishing marginal-quality concrete slabs. – Mike Henry, NW Supply

For more information on how to specify Lythic Solutions products and where to find qualified applicators, contact Lythic Solutions, Inc. (360) 694-5347, info@lythic.net, www.lythic.net

©2008 Lythic Solutions, Inc. Subject to change.

TM

Apply Lythic Densifier to new or existing concrete. It hardens and densifies the surface so it can be polished to a beautiful shine.

All Lythic™ products increase the strength and durability of concrete with each application. Utilizing colloidal silica, Lythic™ Densifier improves concrete as it bonds quickly and cleanly with calcium hydroxide components in all concrete.

Whether densifying at the time of placement, or as part of a polishing process, Lythic™ Densifier is the most cost effective way to harden and increase abrasion resistance of a concrete surface.

Lythic™ Protector and Lythic™ Cleaner support and fortify applications of Lythic™ Densifier when used in ongoing care and maintenance programs.

Colloidal Silica Nano Technology

The Difference in Densifiers™

Lythic™ Solutions

Contact UsFor more information on how to specify Lythic™ Solutions products and where to find qualified applicators, contact Lythic™ Solutions, Inc. (360) 694-5347 | info@Lythic.com | www.Lythic.com

Lythic™ CleanerLythic™ Cleaner is a non-corrosive cleaner, formulated to remove surface dirt and soil from concrete floor surfaces. It fortifies concrete surfaces with amorphous silica as it cleans to increase durability and maintain surface polish.

Benefits:Safe, non-corrosive concentrate•

No rinsing required•

Increases durability of polished floors•

Fortifies concrete floors with colloidal silica •

Water based, environmentally friendly product•

PreparationDry mop or sweep areas to re-move dust and surface debris. Gum and other larger residue should be scraped off the floor before cleaning.

Application methods: Mix 4 ounces of concentrated Lythic™ Cleaner to a gallon of water. For heavy dirt and grease, increase ratio to as much as 8 ounces per gallon. Lythic™ Cleaner is designed for use

with “auto scrubber” machine cleaning. Increase dwell time on heavily soiled areas.

Mop applications require a separate rinse water bucket to clean the mop as it applies Lythic™ Cleaner. Frequent replacement of clean water is required to maintain effectiveness of this method.

No rinsing is required for either cleaning method.

Precautions: Use Lythic™ Cleaner as directed.

Lythic™ ProtectorLythic™ Protector is a penetrating concrete sealer formulated to enhance and protect polished concrete floors. It is a unique product that includes colloidal silica for surface hardness and lithium for water repellency.

Benefits:Enhances colored concrete floors•

Increases durability and stain resistance of •concrete floors

Increases slip resistance•

Ease of maintenance and cleaning•

Water based, environmentally friendly product•

CoverageApproximately 1,500 to 2,000 sq. ft. / gal.

PreparationComplete all floor prep including densification, coloring, and pol-ishing before applying Lythic™ Protector. Clean floor to remove dust and debris. The surface should be completely clean and dry before application.

Application methods Apply a light mist from a pump sprayer. Using a damp micro fiber or a flat cotton pad applicator, spread Lythic™ Protector in a thin film coating using a “figure 8” motion to reduce streaking and to pre-vent puddling. A second coat should be applied after the first is tack free. Work leaving

a wet edge and work in areas bordered by joints or natural breaks. High speed burnishing using a fiber pad (red or black), or hogs hair pad, will further enhance the finished surface.

PrecautionsCure finished floor for 24 hours before allowing regular foot traffic. Do not allow standing water to remain on the surface for the first 48 hours.

Lythic™ Protector is intended for interior use and will not with-stand UV exposure.

Use Lythic™ Cleaner floor cleaner to maintain.

™

Product Description Lythic™ Densifier is a blend of inorganic polymer materials that penetrates slab concrete to increase surface density and hardness. Utilizing a proprietary and “green” manufacturing process, Lythic™ Densifier’s unique formulation of uniform, concentrated, Nano

sized particles, suspended in an ultra low surface tension liquid, penetrates deeply into concrete surfaces bonding with the cement components of the slab. Lythic™ Densifier makes an extremely hard, dense floor surface that has increased wear resistance to foot and fork lift traffic. It is water based and environmentally friendly and is VOC compliant in all states.

Primary Applications Interior or exterior concrete •

Warehouses/Distribution center floors •

Manufacturing plants •

Medical and Research •

Residential garages and floors •

Commercial floors •

Features/Benefits Fills porosity/capillaries of concrete creating a permanent bond that makes floors and walls harder,

less prone to dusting and absorption of most liquids.

Meets all VOC regulations including California•

Meets LEED qualifying standards•

Resists penetration of many liquids including oils and many chemicals•

Helps minimize many rubber tire marks in warehouse applications•

Application equipment may be cleaned with water•

Will not discolor or blush over time•

Not affected by bond breaker systems when used as directed•

Will not leave a white cast on floor if over used or not removed •

Reduces operating costs by increased ease of maintenance and cleaning•

Performance AdvantagesLower pH improves reactivity and stability of materials•

Low viscosity and smaller molecular size provides deeper and more complete penetration•

Will not peel•

Reduces dusting•

Can be applied to newly troweled green slabs•

Packaging5 gallon pails (19L)•

55 gallon drums (209L)•

Technical InformationDrying Time• . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 min to 1 hour

VOC Content• . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 g/l

Total Solids• . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18%

Active Ingredients• . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100% of total solids

pH• . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Freeze Point• . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32˚F

Slip Resistance• . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Does not change floor friction coefficient

Shelf Life• . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 year

Coverage• . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 sq. ft. / gal

Application/DirectionsLythic™ Densifier has two primary methods of application. The first method is designed for application while the slab is still green just after final trowel. The second is designed for use with existing or cured concrete.

Existing, Cured ConcreteLythic™ Densifier can be applied to concrete of any age. Surface must be clean and structurally sound. Surface also must be clear of membrane forming curing compounds, sealers, oils, dust and other surface contaminates. For best results use a black scrubbing pad with Lythic™ Cleaner. If more aggressive surface preparation is needed to remove surface contaminants, 60-100 grit sanding screens can be used. A thorough cleaning is needed after additional scrubbing

Diamond grinding/polishing to an 800 grit finish with Lythic™ Densifier, will pro-vide the most durable and stain resistant floor surface.

Use a low pressure sprayer to apply Lythic™ Densifier to form an even sheen across surface to ensure complete saturation of surface. Apply enough Lythic™ Densifier to keep the surface wet for 15 to 20 minutes. Let surface dry 1 hour before heavy traffic.

New Concrete (Green) Lythic™ Densifier may be applied to newly installed concrete after final trowel while slab is still Green. Slab must be clean and free of all materials such as curing compounds, bond breakers, form release oils or construction dust and debris, etc. Use a low pressure sprayer to achieve a consistent, even application and to ensure consistent coverage of the surface. Re-apply as necessary to keep surface wet for 20 minutes. Let surface dry. No cleaning, flooding, neutralizing or rinsing is necessary. If curing agent is to be applied, it can now be applied over dried application of Lythic™ Densifier.

Clean-UpClean tools and equipment with water immediately after use. Residue from application and clean-up is non-toxic. Protect met-als, glass, wood, paint or brick from contact with Lythic™ Densifier. If surface is accidentally over sprayed, wash immediately with potable water.

MaintenanceRoutine sweeping, mopping and periodic mechanical scrubbing with a neutral pH, non-rinsing cleaner or water is needed. We recom-mend using Lythic™ Cleaner for all cleaning regimes. Avoid any acidic cleaners. Acidic cleaners may etch the surface over time and cause a dulling of the finish. No aggressive scrubbing brushes such as straogrit, nylogrit or other aggressive scrubbing brush should be used. Avoid detergents containing hydroxides or sulfates.

WarrantyWhen applied as directed, Lythic™ Densifier will reduce abrasion and wear to the surface of the concrete. Regular sweeping and cleaning of the concrete surface with Lythic™ Cleaner will maintain its performance and increases longevity. If applied by a certified applicator, Lythic™ Solutions warranties Lythic™ Densifier to penetrate and chemically strengthen the surface of concrete to reduce dusting for 10 years.

This warranty does not cover incidental or consequential damages nor does it cover failure of mix design, penetrating curing compounds, cracking or conditions that are a result of poor concrete finishing. Damage from faulty maintenance procedures or accidental damage to the slab is not covered.

Lythic™ Densifier

™ ™