m icrow ing rpa s -...
TRANSCRIPT
MicroW ing RPASby Red20RC
Specs:W ingspan: 852mmAirfoil: KFm7Construction: 5mm foam boardCG: 135m from nose
Simple KFm7 construction from 5mm foam board(2 steps on top and 1 step on bottom)All panels cut in one piece.Top panel of center is hatch. Bays cut inwing center to house flight controller and ESC,Rx, VTx etc embeded into wings.Use spar if required.Use spar if required.
The MicroWing RPAS and Red20RC logo are copyright Mike Walters 2019This plan is provided free for non-commercial use onlyVisit www.red20rc.com.au for more great wing designs
TOP
BOTTOM