m. r+m.design user manual · 2012-08-30 · 3 checking the process of assembly in 3d when the video...
TRANSCRIPT
R+m.Design User Manual
You can select an example Robots of OLLO Kit and see the assembly.(*Entire example robots of Robotis, OLLO will be constantly updated)
Installation1
① Select your OLLO kit (Starter, Explorer, and Inventor)② Select an example robot③ Touch the image of example robot on the right and the video will start
①
②
③
Selecting Example Robots in each level2
Installation
Selecting Example Robots in each level
Checking the Process of Assembly in 3D
1
2
3
m.Designm.Design
Contact Us : +82-70-8671-2609 / [email protected] shown in the screen may vary in accordance with the type of Smartphone.
Search ‘ROBOTIS’ from Android Play Store and install ‘R+m.Design’.
www.robotis.com
Checking the Process of Assembly in 3D3
When the video is playing, you may pause/play/stop. Once you pause the video, you can zoom in/out, and rotate the screen to see details of assembly in 3D.
① You can go back to Main screen② Press play, it will show the progress of assembly, and press again to pause③ Move slider to skip to the part you want to watch④ Press stop to play the video from the very beginning⑤ You can check the list of necessary parts of the example robot⑥ Once you paused the video, you may zoom in/out and rotate the screen with your finger
R+m.Design User Manual
①
②
③
②
⑤
④
Part list