m7tej multiplay slide & basketball net€¦ · when assembling this equipment be aware of the...

APPROXIMATE ASSEMBLY TIME 2 PERSON ASSEMBLY REQUIRED ASSEMBLY SPACE

90minutes

REQUIRED ASSEMBLY TOOLS

ASSEMBLED DIMENSIONS

FLOOR AREA4M X 3M X 3M

WEIGHT 27 KG, BUILD IN LOCATION

ASSEMBLYINSTRUCTION

20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.After Service Centre (+44) 0330 0904 420, Email [email protected] or visit www.sportspowerfit4kids.com

DESCRIPTIONM7TEJMULTIPLAY WITH SWINGS, GLIDER, SLIDE & BASKETBALL NET

3100mm

2150

mm

1900

mm

ASSEMBLYINSTRUCTION



PAGE 2 OF 25

•

•

•

•

•

•

•

•

•

We suggest you spend some time reading this guide before followingthe simple step-by-step assembly instructions.

Do not discard any of the packaging until you have checked that you have all parts and fittings listed. When discarding packaging take care and consideration for others and the environment.

When assembling this equipment be aware of the safety of yourself and others.

Because of the size of this multiplay we suggest that you assemble it in the area intended for use.

Some of the assembly will be easier with two people. Seek assistancewhen lifting large or heavy items.

Assemble this multiplay on a clean, flat and level surface e.g. the cardboard packaging.

Keep any tools provided or spare fittings for future use. Only use the tools specified.

Assemble all parts loosely, by hand, before tightening any bolts or fixings.

we would suggest storing your multiplay inside or under a suitable cover during winter to help protect against damage and maintain its aesthetic appearance. For details of how to maintain your playset, please refer to “maintenance section”.

BEFORE STARTING ASSEMBLY, PLEASE CHECK ALL PARTS ARE INCLUDED. IF ANY PARTS ARE MISSING PLEASE CONTACT THE HELPLINE ON (+44) 0330 0904 420.

ASSEMBLYINSTRUCTION



PAGE 3 OF 25

• WARNING! Not suitable for children under 36 months. Small parts/long cord- Strangulation Hazard.

• This unit is designed to be used by up to 5 children between ages 3 to 8. Maximum weight of 45kg each, simultaneously not to exceed a combined weight of 225kg.

• Adult supervision is required at all times. Never leave children unattended. • WARNING！Only for outdoor use.• WARNING！Only for domestic use.• Teach children to sit in the centre of the swing play items, with their full weight

in the centre of the seats. DO NOT allow children to lean to the side when on play items or to collide with other playmates. DO NOT allow children to stand on the swing seat and slide.

• Dress children appropriately while on and around this equipment. DO NOT • DO NOT allow children to slide down the slide head first.

allow children to wear ponchos, scarves, jewelry, loose shoes, jackets or clothing with loose strings and/or clothing that might be potentially hazardous whilst using this equipment.

• DO NOT let children use this equipment in any manner other than intended. • DO NOT install over concrete, asphalt, gravel or any other hard surface which

may cause injury should a fall occur. Swing set shall be placed over protective soft material such as sand bed, soft woodlark, and grass lawn. The depth of sand and soft woodlark shall be a minimum of 6 inches.

• The anchor shall be placed level with or under the ground in order to reduce tipping hazards.

• DO NOT let children use this equipment until it has been properly assembled and anchored. Place equipment on level ground not less than 2M from any structures or obstacles such as fences, overhanging branches, laundry or electrical lines, garages, sheds or houses.

• Do not allow children to swing empty play items as they may strike other children or bounce back off the frame and strike the child.

• Instruct children not to walk closely in front of, behind or in between moving play equipment. Instruct children to keep a safe distance away to avoid being struck by the items in use.

• Instruct children not to twist chains or ropes, or loop them over the support bar. This adds stress, reduces strength and may result in failure and cause injury.

• Instruct children not to get off play equipment whilst in motion. DO NOT allow children to jump from moving play equipment.

ASSEMBLYINSTRUCTION



PAGE 4 OF 25

• DO NOT allow children to climb or play on the equipment whilst wet (slips or falls may occur).

• DO NOT allow children to climb on or swing f rom structural mem-bers (e.g. legs, top bar, basketball hoop,etc.) These are structural . components ONLY and NOT play features.

• DO NOT allow children to swing play equipment more than 60 degrees.

• After completion of assembly, ensure all bolts and nuts are tightened and in the correct position.

• DO NOT attach items to the playground equipment that are not specifically designed for use with this equipment, such as, but not limited to, jump ropes, clotheslines, pet leashes, cables and chains as they may cause strangulation hazards.

• At the end of each play season, remove all plastic parts and take indoors. DO NOT allow the use of plastic items when the tempera-ture drops below 0 degrees.

• Dispose of all packaging properly after the unit has been assembled• Please retain the assembly manual for future reference and review

• Do not orientate the slide towards the sun, this may lead to a childbecoming dizzy/disorientated through extended use.

• This product cannot be modified.

each season.

MAINTENANCE• Check all nuts and bolts for tightness and tighten when required.• Check swing seats, chains, and other means of attachments for

evidence of deterioration, replace when required in accordance with the manufacturer’s instructions.

• This unit must be assembled by adults, ensure bolts and small components are kept out of reach of young children.

• Check all fixings regularly, tighten if necessary, and that the suspension system is secure.

• Check metal sections or components for signs of corrosion.• Discontinue use if weakening or breakage found.• Young children in play are unaware of potential dangers and

hazards, therefore responsible adults supervision is essential.• Failure to comply with these precautions may result in injury

Disassemble and store indoors during the winter.• Not suitable for hiring or commercial use.• Never use the equipment in any manner other than intended.

ASSEMBLYINSTRUCTIONASSEMBLYINSTRUCTION



PAGE 5 OF 25

• Shredded bark mulch, wood chips, fine sand or fine gravel are considered to be acceptable shock-absorbing surfaces when installed and maintained at a sufficient depth under and around playground equipment. However each material is only effective when properly maintained. Material should be checked periodical -ly and replenished to maintain correct depth as determined neces-sary for your equipment. Otherwise serious injuries may occur from a fall.

• Toys shall be accompanied by maintenance instructions drawing attention to the need of carrying out checks and maintenance of the main parts at regular intervals; if these checks are not carried out the toy could overturn and otherwise become a hazard. Wheneverpractical, the instructions shall also be affixed to the toy.

• Please retain these instructions for future reference.

TIGHTENING NUTS & BOLTS

• At the start of assembly DO NOT tighten nuts or bolts fully, so as to allow some possible adjustment for ease of assembly.

• After all major components are assembled, go back over all bolts and nuts and properly tighten all of them before using this product.

ASSEMBLYINSTRUCTION



PAGE 6 OF 25

1 X1 2 X1 3 X1

4 X1 5 X4 6 X4

7 X1 8 X1 9 X2

10 X2 11 X2 12 X2

13 X2 14 X2 15 X2

16 X4 17 X4 18 X2

19 X2 20 X1 21 X1

22 X1 23 X4

Plastic Cap Long Plastic Sleeve

Footrest Swing Seat

Cross Bar Glide Top Tube

Upper Leg Lower Leg

Top Left Beam Upper Tube

Glide Seat Tube Glide Lower Tube

Basketball Board Basketball Net

Top Right Beam

Bracket

Cross Bar – With Two Holes For Connecting Slide

Plastic Connector

Glide Seat

Plastic Connector

Short Plastic Tube

Basketball Hoop Anchor

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

https://www.ileisure.co.uk/shop/top-right-beam-86/

https://www.ileisure.co.uk/shop/upper-tube-86/

https://www.ileisure.co.uk/shop/top-left-beam-86/

https://www.ileisure.co.uk/shop/glider-support-channel/

https://www.ileisure.co.uk/shop/upper-leg-sw91/

https://www.ileisure.co.uk/shop/saucer-swing-and-glider-lower-leg/

https://www.ileisure.co.uk/shop/cross-bar-with-two-holes-for-connecting-slide/

https://www.ileisure.co.uk/shop/cross-rail/

https://www.ileisure.co.uk/shop/glider-top-tube/

https://www.ileisure.co.uk/shop/plastic-connector-sleev/

https://www.ileisure.co.uk/shop/glider-seat-tube-2/

https://www.ileisure.co.uk/shop/glider-lower-tube/

https://www.ileisure.co.uk/shop/glider-seat/

https://www.ileisure.co.uk/shop/footrest/

https://www.ileisure.co.uk/shop/swing-seat-2/

https://www.ileisure.co.uk/shop/plastic-connector-1/

https://www.ileisure.co.uk/shop/plastic-cap/

https://www.ileisure.co.uk/shop/plastic-sleeve/

https://www.ileisure.co.uk/shop/plastic-tube/

https://www.ileisure.co.uk/shop/basketball-board-86/

https://www.ileisure.co.uk/shop/basketball-hoop/

https://www.ileisure.co.uk/shop/basketball-net/

https://www.ileisure.co.uk/shop/anchor/

ASSEMBLYINSTRUCTION



PAGE 7 OF 25

A X10 B X4 C X4

D X2

G X2

J X12 K X12

M X8 N X26

P X1 Q X1

V X1

H X2

E X2 F X4

6mm

M8×50mm M8×54mm M8×114mm

M8×95mm M8×20mm M6×36mm

M6×60mm M6×36mm

x mm M8

S X4

M5

T X8

6 12mm

I X40

L X26

x mm

O X8

M6

R X4

M5×15mm

U X1

4mm

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

https://www.ileisure.co.uk/shop/bolt-m8-x-50/

https://www.ileisure.co.uk/shop/bolt-m8x54/

https://www.ileisure.co.uk/shop/u-bolt-m8x114/


https://www.ileisure.co.uk/shop/trampoline-bolt-m8x20mm/


https://www.ileisure.co.uk/shop/arc-washer-19x8-5/

https://www.ileisure.co.uk/shop/flat-washer-19x8-5/

https://www.ileisure.co.uk/shop/arc-washer-14x6-5/

https://www.ileisure.co.uk/shop/spring-washer-8-5x13-5mm/

https://www.ileisure.co.uk/shop/spring-washer-6-5x10mm/

https://www.ileisure.co.uk/shop/trampoline-cap-nut-m8/

https://www.ileisure.co.uk/shop/cap-nut-m6/

https://www.ileisure.co.uk/shop/wrench/

https://www.ileisure.co.uk/shop/spanner/

https://www.ileisure.co.uk/shop/trampoline-bolt-m5-x-10mm/

https://www.ileisure.co.uk/shop/trampoline-cap-nut-m5/

https://www.ileisure.co.uk/shop/flat-washer-6x12mm/

https://www.ileisure.co.uk/shop/allen-wrench-4mm/

https://www.ileisure.co.uk/shop/allen-key-6mm/

ASSEMBLYINSTRUCTION



PAGE 8 OF 25

H2

Part list for slide

H4

H7

H9

X1H6

H13

M6 X 25mm

H14

M6

6.5 X 13mm

H16 X6H17

H12

H5

Connecting Part Connecting Plate

Slide(Right Part)

H3

Slide(Middle Part)

H7A

Slide Support (Left Part)

H8

Slide Ladder Steps

H1 X1

X2

X1

X2 X16

X4

X8

X6

H15 X14

X8

X1 X2

X1 X1

X2

H10

M6 X 9mm

6.5 X 13mm 6.5 X 10mm

Slide(Left Part)

Slide Support Tube

Slide Support (Right Part)

Leg Tube And Slide Connector

M6 X 30mm

X16H18

8.5 X 19mm

X4H11

M6 X 14mm

VIEW PRODUCT VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

VIEW PRODUCT

https://www.ileisure.co.uk/shop/flat-washer-19x8-5/

https://www.ileisure.co.uk/shop/spring-washer-6-5x10mm/

https://www.ileisure.co.uk/shop/cap-nut-m6/

https://www.ileisure.co.uk/shop/flat-washer-%E2%8F%806-5-x-%E2%8F%8013/

https://www.ileisure.co.uk/shop/bolt-m6x30mm/

https://www.ileisure.co.uk/shop/arc-washer-6-5x13mm/

https://www.ileisure.co.uk/shop/bolt-m56x25mm/

ASSEMBLYINSTRUCTION



PAGE 9 OF 25

J

x 4pcsL

x 2pcsN

x 2pcsE

x 2pcs

Step 1

E

E

N

NL

LJ

J

1

4

J

J

ASSEMBLYINSTRUCTION



PAGE 10 OF 25

Step 2

A

x 4pcsI

x 8pcsL

x 4pcsN

x 4pcs

AI

L I

N

55

3

55 5

5

1

123

2

ASSEMBLYINSTRUCTION



PAGE 11 OF 25

TIP: ENSURE TO ATTACH THE SWING SEAT TO

THE U BOLT FIRST.Step 3

C

x 4pcsI

x 16pcsL

x 8pcsN

x 8pcs

CI

ILN

15

15

12

3




PAGE 12 OF 25

Step 4

R

x 4pcsT

x 8pcsS

x 4pcs

R T S

1010



L N

IA

I


PAGE 13 OF 25

Step 5

A

x 4pcsL

x 4pcsN

x 4pcsI

x 8pcs

1010

5

55

5

5

6

6

6 6

6




PAGE 14 OF 25

TIPS: #1 PLEASE ATTACH THE PLASTIC CAP(17) TO THE

#2 THE CROSS BAR (7&8) NEEDS TO BE ATTACHED TO THE OUTER SIDE OF THE SWING FRAME

CROSS BAR(7&8) FIRST.Step 6

B

x 4pcsJ

x 4pcsL

x 4pcsN

x 4pcsI

x 4pcs

617

7 L N

JB

I

1010

8

7

6

66

6

ASSEMBLYINSTRUCTION



PAGE 15 OF 25

NOTE : ENSURE TO ATTACH THE PLASTIC CONNECTOR(10) TO THE GLIDER TOP TUBE(9), THEN INSERT SHORT PLASTIC TUBE(19) .

A

x 2pcsJ

x 4pcsL

x 2pcsN

x 2pcs

Step 7

4 10

19

9

9J

4

9J

L N

A

ASSEMBLYINSTRUCTION



PAGE 16 OF 25

G

x 2pcsK

x 4pcsM

x 2pcsO

x 2pcs

Kx 4pcs

Mx 2pcs

Ox 2pcs

Hx 2pcs

Step 8

9

12

14

14

12

9

12

O M K

GK

14

9

12

HKKMO

ASSEMBLYINSTRUCTION



PAGE 17 OF 25

F

x 4pcsM

x 4pcsK

x 4pcsO

x 4pcs

Ix 4pcs

Nx 2pcs

Dx 2pcs

Lx 2pcs

Step 9

I

I L N

D16

11

11

9

18

K

F

MO

131111

9

99

11

13

13

11

ASSEMBLYINSTRUCTION



PAGE 18 OF 25

H10

x14pcs x12pcsH15 H18

x 2pcs

Step 10

H3

H10

H18

H1

H3 H10

H15

H1

H2

H3

H1

ASSEMBLYINSTRUCTION



PAGE 19 OF 25

Step 11

H4

H4

H1

H3

H2H3

H6

H1

H3

H2 H6

Slide H6 into the end of plastic sheet with teeth. Gently push the plastic sheet upward with one hand, line up the teeth with the corresponding indents on the bottom of H6 and push it gentlyto slide it into place. Turn slide over. With one person holding H6 firmly in place, another person should insert H4 into the slots at the bottom of H6. Tip: it is easier to install H4 by tilting H6 upwards.

1.

2.

Two people needed for this step.

ASSEMBLYINSTRUCTION



PAGE 20 OF 25

Step 12

H13 H15

H1

H2

H4

H4

H13x4pcs

H15x 4pcs

H5 H5

H4

H1

H5

ASSEMBLYINSTRUCTION



PAGE 21 OF 25

Step 13 H7

H6

H7A

H12

H16

H7

H11H18

DIAGRAM A DIAGRAM B

H12 H16 H18

H11

X4pcs X2pcs X2pcs X4pcs

ASSEMBLYINSTRUCTION



PAGE 22 OF 25

Step 14

H7

H7A

H9

H12

H12

H16

H15 H17

H15

H14H17

H16

H8

H15

H10H15

H9

H2

H2

H1

H1

H16 H17

H15

X6pcs X4pcs X4pcs

H8

H8

H14

H12

X4pcsH10

X2pcs X4pcs

ASSEMBLYINSTRUCTION



PAGE 23 OF 25

Step 15

H15H17

H14

H12

H16

H2

7

H9

H16 H17

H15

X2pcs X2pcs X2pcs

H14

H12

X2pcs X2pcs

ASSEMBLYINSTRUCTION



PAGE 24 OF 25

30cm Width

30cm Depth

Concrete

Ground

minimum clearance between thefootrest and the ground.

IMPORTANT: The product must be anchored into the ground.For optimum safety and performance, we recommend concretingin the corners as shown in the diagram.

6

23

Step 16

SP-19-SW086-SD-18001

ASSEMBLYINSTRUCTION



PAGE 25 OF 25

SP-19-SW086-SD-18001

SEAT ADJUSTABLE GUIDE THE LENGTH OF THE ROPE IS ADJUSTABLE FOR THE HEIGHT OF THE CHILD THROUGH THE SEAT CONNECTOR.

TO ADJUST, LOOSEN THE KNOT ON THE SEAT CONNECTOR, PULL ROPE THROUGH THE HOLES AND TIGHTEN AGAIN.

MAKE SURE THAT THE KNOTS ARE TIGHT AND THAT BOTH ROPES ARE ADJUSTED SO THAT THE SEAT IS HORIZONTAL.

IMPORTANT: Minimum clearance between the footrest/seat and the ground should be 35 cm.

m7tej multiplay slide & basketball net€¦ · when assembling this equipment be aware of the...

Documents