ma1705-a © 2017 casio computer co., ltd. exilim connect 4 · a movie file sent from the camera to...

ContentsIntroduction

What you can do with EXILIM Connect

EXILIM Connect Top Screen

Precautions while Using EXILIM Connect

Connecting to a CameraPairing the Camera with a Smartphone

Checking the Connection Status

Connecting with a Paired Camera

Unpairing the Camera from a Smartphone

Connecting with a Camera via Wireless LANWithout Pairing

Remote CaptureControlling the Camera and PerformingRemote Capture from a Smartphone

Operation Screen During Remote CaptureCamera Limitations with Remote Capture

Viewing Images in CameraMemory

Viewing Images on a SmartphoneOperation Screen while a Single Image isDisplayed

Copying Images to a Smartphone

Deleting Images

Protecting Images

MA1705-A © 2017 CASIO COMPUTER CO., LTD.

Sending Images from theCamera

Having the Camera Send Images to theSmartphone as They are Recorded (AutoSend)

Sending the Image Displayed on the CameraMonitor Screen to a Smartphone (Quick Send)

To assign the Quick Send function to thefront shutter buttonTo send the image on the camera monitorscreen to a smartphone

Sending Selected Images to a Smartphone

Adding Information to an ImageAdding Location Information to Snapshotssent to the Smartphone

Managing ImagesUsing the EXILIM ALBUM App

Storing Images in a Scene Album for Sharingwith Others

Sharing Snapshots with an UnpairedSmartphone (One Time Share)

Configuring Camera SettingsChanging the Camera Password for WirelessLAN Connection

Configuring Camera Date and Time Settings

Sending Images to a SmartphoneAutomatically

Configuring Camera Sound Settings

Looking Up the Camera Version

Initializing the Camera

Formatting Camera Memory

Troubleshooting

Copyrights

Introduction● The procedures in this User’s Guide are

performed using a typical smartphone/tablet. Certain details (display contents,etc.) may differ on the device you areactually using.

● The contents of this User’s Guide aresubject to change without notice.

● The contents of this User’s Guide havebeen checked at each step of theproduction process. Feel free to contact usif you notice anything that is questionable,erroneous, etc.

● Any copying of the contents of this User’sGuide, either in part or its entirety, isforbidden. Except for your own personaluse, any other use of the contents of thisUser’s Guide without the permission ofCASIO COMPUTER CO., LTD. is forbiddenunder copyright laws.

● CASIO COMPUTER CO., LTD. shall not beheld liable for any damages or lost profitssuffered by you or any third party due to theuse of this application software.

● CASIO COMPUTER CO., LTD. shall not beheld liable for any damages or lost profitscaused by loss of memory contents due tomalfunction, repair, or any other reason.

● Note that the example screens and productillustrations shown in this User’s Guide maydiffer somewhat from the screens andconfiguration of the actual product.

EXILIM Connect 4.2

1

What you can do with EXILIMConnect

Installing EXILIM Connect on yoursmartphone and then establishing aconnection with your camera enables thefunctions described below.

● Remote CaptureRemotely control and shoot with the camerausing a smartphone.l Controlling the Camera and Performing

Remote Capture from a Smartphone

● View on phoneYou can use the procedures in this section toview snapshots stored in camera memory ona smartphone, to copy snapshots and moviesto the smartphone, and perform otheroperations.l Viewing Images in Camera Memory

● Using the EXILIM ALBUM AppYou can use the EXILIM ALBUM app to viewimages in automatically generated albumsand enjoy re-living your memories.l Using the EXILIM ALBUM App

● Share Album in Scene appSettings can be configured so imagesreceived by the smartphone are automaticallystored in a Scene app album.l Storing Images in a Scene Album for

Sharing with Others

● Auto SendImages can be automatically sent as they areshot to a smartphone that has been pairedwith the camera.l Having the Camera Send Images to the

Smartphone as They are Recorded (AutoSend)

● Quick SendWith some cameras that have a front shutterbutton, you can simply press the button tosend a snapshot displayed in the PLAY modeto a smartphone. After sending a snapshot toa smartphone, you can then upload it to asocial networking service.l Sending the Image Displayed on the

Camera Monitor Screen to a Smartphone(Quick Send)

● Send to phoneWith a camera equipped with a monitorscreen, you can select one or more snapshotand/or movie file in camera memory, and sendit to a smartphone. Once an image is sent tothe smartphone, you can send it on to othersvia a social network service.l Sending Selected Images to a Smartphone

Important!

● A movie file sent from the camera to aniPhone (iOS) smartphone is saved as-is as a MOV file.Transfer to most other terminals thatare not an iPhone (iOS) will normallycause the movie file to be converted toan MP4 file.If a terminal that is not an iPhone (iOS)is unable to convert a movie file to MP4format for some reason, the movie filewill be saved as-is as a MOV file.

EXILIM Connect Top ScreenStarting up EXILIM Connect will display thetop screen shown below.

②

④

①

③

⑧

⑤

⑥

⑦

A View on PhoneTap to view images stored in cameramemory and copy them to thesmartphone. Depending on theconnected camera, you may also be ableto delete and protect images stored incamera memory.l Viewing Images in Camera Memory

B PairingWireless LAN connection settings can beconfigured by simply establishing aBluetooth wireless technology connection(pairing) between the camera andsmartphone.Up to two cameras can be paired with asmartphone at one time.l Pairing the Camera with a Smartphone

C Connection statusShows the current status of theconnection between the smartphone andcamera.l Checking the Connection Status

D Remote CaptureTap to operate the camera from thesmartphone.l Controlling the Camera and Performing

Remote Capture from a Smartphone

E EXILIM ALBUMTap to start up the EXILIM ALBUM appl Using the EXILIM ALBUM App● To use the EXILIM ALBUM app, you

need to install it.

EXILIM Connect 4.2

2

F SceneTap to start up the Scene app● To use the Scene app, you need to

install it.● The Scene app is an image

management app by Ripplex Inc.It makes it possible to display images athigh speed and to share albums withfriends.

G Receive iconDisplayed only while camera images arebeing received. Tapping displays theimages currently being received.l To send the image on the camera

monitor screen to a smartphonel Sending Selected Images to a

Smartphone

H SettingsTap to perform the operations below.● View the SSID of the camera connected

to the smartphone● View communication history● Configuring Camera Settingsl Unpairing the Camera from a

Smartphonel Configuring Camera Settings

● To configure settings that enablestorage of images received from thecamera to the Scene appl Storing Images in a Scene Album for

Sharing with Others● Changing the setting for adding location

information to images (some terminals)l Adding Location Information to

Snapshots sent to the Smartphone● View a brief explanation of the app

Important!

● Some functions may not be available,depending on your camera model. Inthis case, the names of unavailablefunctions will not appear on the displayor will be dimmed.

Precautions while UsingEXILIM Connect

Important!

● Inside an aircraft or anywhere elsewhere use of wireless communicationis restricted or prohibited, put thecamera into the airplane mode.

● Depending on your smartphonemodel, its operating system version,and/or its remaining storage capacitycan cause failure of a movie orsnapshot save operation.Receiving a camera file, perform therequired operation on yoursmartphone to check if the file wasstored properly.

● Some terminals store received moviesin a folder named EXILIM Connect.

● With some terminals, you may not beable to play back received movies and/or output audio. In this case, you willrequire a separate movie player thatsupports playback of MOV type moviefiles.

● Images recorded with anothercompany’s camera cannot be receivedusing this app.

● Attempting to use a memory card thatincludes a wireless function with yourcamera can cause abnormaloperation.

Note

● Note that using wireless functionsrequires more battery power usagethan normal. Make sure that thecamera battery is sufficiently chargedbefore starting a wireless operation.

● The connectible range between thecamera and a smartphone depends onthe local communication environmentand on the type of terminal you areusing.

Connecting to aCamera

The first time you establish a wirelessconnection between the camera and asmartphone, you need to use the procedurebelow to configure wireless connectionsettings.There are two types of wireless connection:Bluetooth® wireless technology connectionand wireless LAN connection.

Pairing the Camera with aSmartphone

Wireless LAN connection settings can beconfigured by simply establishing a Bluetoothwireless technology connection (pairing)between the camera and smartphone.Up to two cameras can be paired with asmartphone at one time.● The camera operations you need to perform

depend on the camera model. For fulldetails, see the user documentation thatcomes with your camera.

1. Prepare the camera for pairing asdescribed below.Camera Equipped with a MonitorScreenOn the camera, enter a wireless mode andthen select “Pairing”.l Entering the Camera’s Wireless ModeCamera Not Equipped with a MonitorScreenUse the procedure provided in the userdocumentation that comes with thecamera to set it up for pairing.

2. On the smartphone, start up the “EXILIMConnect” app.● If this is the first time you are starting up

EXILIM Connect, a “LICENSEAGREEMENT” and “Privacy Policy” willappear. Tap “Agree”. This will display ascreen that explains app functions.On the screen, tap “Next” to continue tothe text screen. Tapping “Done” at theend will display the top screen (EXILIMConnect Top Screen).

3. On the smartphone, tap “Pairing”.

Pairing

EXILIM Connect 4.2

3

4. On the smartphone, tap the camera’sname (SSID) you want to pair with.This establishes a Bluetooth wirelessconnection between the camera andsmartphone.● The camera name (SSID) will be

displayed after you enter the WirelessMode on the camera and select“Pairing”.On the screen that appears, check the“Device” item.If your camera is not equipped with amonitor screen, you can find its name(SSID) on the sheet that comes packedwith it.

● If the smartphone is already paired withtwo cameras, a camera selectionscreen appears. Select the camerawhose pairing you want to overwrite.

5. Follow the instructions that appear on thesmartphone to complete the pairingoperation.● In the case of an iPhone (iOS), you need

to configure wireless LAN settings(install a profile).

● If there is no wireless LAN connectionbetween the camera and smartphone,use the smartphone’s Wi-Fi settings toselect the camera’s SSID to establish awireless LAN connection between thecamera and smartphone.

● Entering the Camera’s Wireless ModeTo connect with a camera or to send picturesfrom a camera that has not been paired withthe smartphone, put the camera into itsWireless Mode.● The camera operations you need to perform


If your camera has a [W] (Wireless)button:

Press [W] (Wireless).If your camera does not have a [W](Wireless) button:

Press [MENU], select the “REC MENU” tabor “PLAY MENU” tab, select “WirelessMode”, and then press [SET].

If your camera supports touch paneloperation:

Touch the Show icon and then the wirelessmode icon.

Checking the ConnectionStatus

You can use the EXILIM Connect top screento check the current status of the connectionwith the camera.

● When paired with one camera

Wireless LAN connection status

Bluetooth wireless technology connection status

● When paired with two camerasShows the current statuses of the twocameras.

Wireless LAN connection status

Bluetooth wireless technology connection status

Name (SSID) of second camera

Name (SSID) of first camera

Icon Status- Nothing Not paired with a camera.

GrayPaired with a camera, butnot connected withBluetooth wirelesstechnology.

PinkPaired with a camera,connected with Bluetoothwireless technology.

Gray No wireless LANconnection with a camera.

Pink Wireless LAN connectionwith a camera.

Connecting with a PairedCamera

Connection with the smartphone becomeseasy once a camera is paired with it.Use the procedures below to connect with apaired camera.● The camera operations you need to perform


● Non-EX-FR Series Camera

1. Turn off the camera.● With certain camera models, you can

leave the camera on and display one ofthe screens below before moving on tostep 2.ー Record screenー Playback screenー Wireless mode screen

2. On the smartphone, start up the “EXILIMConnect” app.● Check to make sure that the connection

icon (“ ”) on the top screen is pink.

● EX-FR Series Camera

1. Put the camera into its Sleep Mode ordisplay its Wireless Mode screen.● Either enter the sleep mode.

If you have a controller① Turn on the camera and

controller.② On the controller, press [p]

(Power).If you do not have a controller

Turn on the camera and do notperform any operation for at least 30seconds. This will cause the camerato enter the sleep mode.

The sleep mode is indicated by thecamera’s operation lamp slowlyflashing green.

● Or display the wireless mode screen.① Touch the Show icon.② Touch the wireless mode icon.

2. On the smartphone, start up the “EXILIMConnect” app.● Check to make sure that the connection

icon (“ ”) on the top screen is pink.

EXILIM Connect 4.2

4

Note

If you are unable to establish a wirelessLAN (Wi-Fi) connection between thesmartphone and camera, it may meanthat the smartphone is alreadyconnected to one of the wireless LANsbelow.Re-establish the wireless LANconnection with the smartphone usingthe camera’s SSID and password.

ー Household wireless LANー Public wireless LANー Mobile device wireless LAN

Unpairing the Camera from aSmartphone

To use the camera with a differentsmartphone, first unpair it from the currentsmartphone.Note that you need to perform operations onboth the smartphone and the camera to unpairthem.● The camera operations you need to perform


1. On the smartphone TOP screen (EXILIMConnect Top Screen), tap “ ”.

2. On the smartphone, tap “Unpairing”.● When the smartphone is paired with two

cameras, a camera selection screenappears. Select the camera from whichyou want to unpair.

3. On the smartphone, tap “Unpair”.● If you are unpairing from an iPhone

(iOS), delete the camera’s wirelessLAN connection settings (profile) fromthe iPhone settings.

4. On the camera, perform the requiredunpairing operation.

Connecting with a Cameravia Wireless LAN WithoutPairing

You need to configure smartphone wirelessLAN connection settings by inputting thecamera’s SSID and password.For information about how to configurewireless LAN connection settings, refer toyour camera’s user documentation.

Remote CaptureThis function lets you remotely shoot asnapshot or movie with the camera using asmartphone (Remote Capture).You also can perform remote zoom, self-timer,and other operations as well.

Controlling the Camera andPerforming Remote Capturefrom a Smartphone

● The camera operations you need to performdepend on the camera model. For fulldetails, see the user documentation thatcomes with your camera.

● Paired Camera OperationYou can start Remote Capture by performingthe simple steps below.

1. After pairing with the camera, start up“EXILIM Connect” on the smartphone.l Connecting with a Paired CameraIf there is a Bluetooth wireless technologyconnection between the camera andsmartphone, the connection icon (“ ”)on the EXILIM Connect top screen will bepink.

2. On the smartphone, tap “RemoteCapture”.After a short while, the camera will start upin its wireless mode, ready to recordimages under remote control of thesmartphone.● If a camera selection screen appears,

select the camera you want to use forRemote Capture.

3. Compose the image on the smartphone’sscreen as you shoot.● About 60 seconds after Remote

Capture starts, the camera’s monitorscreen will go blank.Even though the monitor screen isblank, you can shoot images as long asthe camera’s back lamp or operationlamp is lit green.

● With an EX-FR Series camera, you canshoot images as long as the camera’swireless LAN connection lamp is litblue.

● After you are finished with RemoteCapture, return to the app’s top screen.

● You can view an image stored incamera memory by tapping “ ”.

● Un-paired Camera OperationsPerform one of the procedures below to startRemote Capture.To perform operations on an un-pairedcamera*

1. On the camera, enter the wireless mode.l Entering the Camera’s Wireless Mode

2. On the camera, select “Shoot with phone”,and then “Remote Start” or “Start”.● If there is a wireless LAN connection

between the smartphone and camera,advance to step 4 of this procedure.

3. For the smartphone’s Wi-Fi settings,select the SSID displayed on the cameraand establish a wireless LAN connectionbetween the camera and smartphone.

4. On the smartphone, start up the “EXILIMConnect” app.



● With an EX-FR Series camera, thecontroller monitor screen will go blankand the controller’s operation lamp willflash green about 60 seconds afterRemote Capture starts.Even though the controller monitorscreen is blank, you can shoot imagesas long as the camera’s wireless LANconnection lamp is lit blue.



* Depending on the camera model, you maynot be able to perform the above operation.

To perform operations with EXILIMConnect

1. Use the procedure provided in the userdocumentation that comes with thecamera to set it up for wireless LANconnection.

2. For the smartphone’s Wi-Fi settings,select the camera’s SSID, and establish awireless LAN connection between thecamera and smartphone.

3. On the smartphone, start up “EXILIMConnect” and then tap “Remote Capture”.This will enable recording, with cameraoperations controlled from thesmartphone.● If a camera selection screen appears,

select the camera you want to use forRemote Capture.

EXILIM Connect 4.2

5



● With an EX-FR Series camera, thecontroller monitor screen will go blankand the controller’s operation lamp willflash green about 60 seconds afterRemote Capture starts.Even though the controller monitorscreen is blank, you can shoot imagesas long as the camera’s wireless LANconnection lamp is lit blue.



Operation Screen During RemoteCapture

EXILIM Connect supports the remote captureoperations listed below.Some operations may differ depending onyour smartphone type and camera model.

123412341234

②③④⑤

⑧

⑨⑩

⑪

①

⑰

⑭⑬⑫

⑦

⑥

⑮

⑯

A Back buttonExits Remote Capture.

B Remote Capture settings iconSelect this item to configure imagerecording settings.The settings you can configure depend onthe camera’s recording mode or drivemode. Turning on “Auto copy aftershooting” causes images you shoot withthe camera to be copied automatically tothe connected smartphone.

C Recording Mode button*

Tap to change the recording mode.

D Display camera images buttonTap to view images stored in cameramemory.l Viewing Images in Camera Memory

E Flash setting button*

Displays current flash or LED lightsettings.Tap to change flash or LED light settings.

F Drive Mode button*

Tap to change the Drive Mode (SingleShot, CS, Interval Shooting, Fixed PointObservation).

G Shooting areaDisplays what is being picked up by thecamera’s lens.

H Full-screen display buttonTap to display a full-screen view of theshooting range.To return to the standard view, tap “ ”.

I Zoom button*

Performs a zoom operation.

J Prerecord CS button*

Starts Prerecord CS shooting.This button is displayed when ProgramAuto High Speed CS is selected for therecording mode or drive mode setting, andthe “Pre-record CS Shots” setting isanything other than “0” or the “Pre-recordCS” setting is on.

K Snapshot/Movie button*

Toggles between snapshot and movieshooting.

L Shutter buttonShoot a snapshot or start movie recording.

M Get images button*

Receives the snapshot that was justrecorded with the camera.This option is not displayed while the “Autocopy after shooting” Remote Capturesetting ( ) is turned on, becauserecorded images are sent to thesmartphone automatically.

N GPS iconShows whether or not location informationis being included. A “GPS” icon isdisplayed while information is beingembedded.

O Battery icon*

Shows the camera’s battery status.

P Remaining memory capacity*

Shows the current remaining memorycapacity.When shooting snapshots, shows thenumber of images that can be shot. Whenshooting a movie, shows the remainingtime that can be recorded.

Q Self-timer button*

Displays current self-timer settings.Tap to change self-timer settings.

* Depending on the camera model, thisfunction may not be displayed or you maynot be able to change its setting.

Camera Limitations with RemoteCapture

Depending on the model of the camera beingused there may be limitations on shooting.Equipped functions depend on the cameramodel.● The displayed shooting area and the image

that is actually shot may be different,depending on the camera model or modebeing used.

● Certain camera models let you specify themovie quality for Remote Capture.If you are using a camera that does notsupport movie quality setting for RemoteCapture, movie quality is STD (640×480).

● “ Tracking” cannot be selected for the AFarea setting while shooting with RemoteCapture.If “ Tracking” is selected in another mode,selecting Remote Capture will cause the AFarea setting to change to “ Spot”.

● The Motion Shutter cannot be used whileshooting with this function.

● Some camera models let you change therecording mode or drive mode. Availablerecording modes and drive modes dependon the camera model.

● Depending on your camera model, thesettings below can be configured withEXILIM Connect while Program Auto HighSpeed CS is selected as the recordingmode or drive mode. The settings you canconfigure depend on your camera model.ー High Speed CS fpsー Maximum CS Shotsー Pre-record CS Shotsー Pre-record CS

● When the “Focus” setting is “AF” (AutoFocus) or “Macro”, continuous AF isenabled during Remote Capture and focusis performed in the center of image.

● Certain camera models allow intervalrecording of snapshots. To start an IntervalShooting operation, select either of themodes below as the EXILIM Connectrecording mode or drive mode. Therecording mode or drive mode you canselect depends on your camera model andcamera setup.ー Interval Shot ( Standard, Intelligent)ー Fixed point observation*

* When the camera is paired with asmartphone, this mode causes images to besent to the smartphone automatically asthey are shot by the camera. Note, however,that the shooting interval is fixed. Also, thereare some limitations on camera operation.

EXILIM Connect 4.2

6

Viewing Images inCamera Memory

You can use the procedures in this section toview snapshots stored in camera memory ona smartphone, and to copy snapshots andmovies to the smartphone. Depending on theconnected camera, you may also be able touse EXILIM Connect to delete and protectimages stored in camera memory.

Viewing Images on aSmartphone


● Paired Camera Images

1. After pairing with the camera, start up“EXILIM Connect” on the smartphone.l Connecting with a Paired CameraIf there is a Bluetooth wireless technologyconnection between the camera andsmartphone, the connection icon (“ ”)on the EXILIM Connect top screen will bepink.

2. On the smartphone, tap “View on Phone”.After a short while, the camera will start upin its wireless mode and display a menu ofimages in camera memory.● If a camera selection screen appears,

select the camera whose image youwant to view.

● Tapping “ ” will start Remote Capture.If your camera has a telescoping lensstarting a Remote Capture operationwill cause the lens to extend. Make surethere is nothing near the camera thatmight interfere with lens movement.

3. Tap the image you want to display.This displays an enlarged version of theimage you tapped.● To return to the image menu, tap “ ”

(Back).● Un-paired Camera ImagesTo perform operations on an un-pairedcamera*


2. On the camera, select “Send to phone”,and then “View on phone”.● If there is a wireless LAN connection

between the smartphone and camera,advance to step 4 of this procedure.


4. On the smartphone, start up the “EXILIMConnect” app.After a short while, the camera will start upin its wireless mode and display a menu ofimages in camera memory.● Tapping “ ” will start Remote Capture.

If your camera has a telescoping lensstarting a Remote Capture operationwill cause the lens to extend. Make surethere is nothing near the camera thatmight interfere with lens movement.


(Back).* Depending on the camera model, you may

not be able to perform the above operation.To perform operations with EXILIMConnect

1. Use the procedure provided in the userdocumentation that comes with thecamera to set it up for wireless LANconnection.

2. For the smartphone’s Wi-Fi settings,select the camera’s SSID, and establish awireless LAN connection between thecamera and smartphone.

3. On the smartphone, start up “EXILIMConnect” and then tap “View on Phone”.This displays a menu of images in cameramemory.● If a camera selection screen appears,

select the camera whose image youwant to view.

● Tapping “ ” will start Remote Capture.If your camera has a telescoping lensstarting a Remote Capture operationwill cause the lens to extend. Make surethere is nothing near the camera thatmight interfere with lens movement.


(Back).

Operation Screen while a SingleImage is Displayed

①

② ③ ④

A Full-screen display buttonDisplays a full-screen view of thedisplayed image.To exit the full-screen view, tap “ ”.

B Copy buttonCopies the displayed image to asmartphone.

C Delete button*

Deletes the displayed image.● A protected file cannot be deleted.

D Protect button*

Protects the displayed image.To unprotect an image, tap “ ”(Protect)again.

* Depending on the camera model this optionmay not be displayed or may be disabled.

EXILIM Connect 4.2

7

Copying Images to aSmartphone

1. Use the procedure under Viewing Imageson a Smartphone to display menu ofimages in the memory of the camerawhose images you want to view on thesmartphone.

2. On the smartphone, tap “Select”.

3. On the smartphone, tap the images youwant to copy.There will be a check mark in the checkbox of all the images you select.● You can copy up to 100 images per

copy operation.

4. After selecting all of the images you wantto copy, tap “ ” (Copy to Smartphone)on the smartphone.This will copy the images you selected tothe smartphone.

5. After the image copy operation iscomplete, perform one of the operationsdescribed below on the smartphone.

Share Album in Scene app :You can use the Scene app to share thecopied images.Preview photo in Scene app :You can use the Scene app to view thecopied images.Send to SNS :Displays a screen for sending imagesto a social networking site.Cancel :Exits the operation.

Deleting ImagesThis function is available for some cameramodels.



3. On the smartphone, tap the images youwant to delete.There will be a check mark in the checkbox of all the images you select.

4. After selecting all of the images you wantto delete, tap “ ” (Delete) on thesmartphone.

5. On the smartphone, tap “OK”.This will delete the selected image fromthe camera.

Note

● A protected file cannot be deleted.

Protecting ImagesThis function is available for some cameramodels.



3. On the smartphone, tap the images youwant to protect.There will be a check mark in the checkbox of all the images you select.

4. After selecting all of the images you wantto protect, tap “ ” (Protect) on thesmartphone.This protects the selected images.● To unprotect an image, tap it on the

smartphone and then tap “ ” (Protect)again.

Sending Images fromthe Camera

You can configure settings to send images tothe smartphone automatically as they are shotwith the camera, or you can send selectedimages.

Important!

● A movie file sent from the camera to aniPhone (iOS) smartphone is saved as-is as a MOV file.Transfer to most other terminals thatare not an iPhone (iOS) will normallycause the movie file to be converted toan MP4 file.If a terminal that is not an iPhone (iOS)is unable to convert a movie file to MP4format for some reason, the movie filewill be saved as-is as a MOV file.

Having the Camera SendImages to the Smartphone asThey are Recorded (AutoSend)

You can configure the app so images are sentfrom the paired camera to the smartphone assoon as they are shot.If there is no connection between the cameraand smartphone when the images are shot,they will be sent as soon as a connection isestablished.● The camera operations you need to perform


1. Configure settings to send camera imagesautomatically.● If you are configuring settings on the

camera, enter a wireless mode, select“Wireless settings”, and then configuresettings. *

● If you are configuring settings withEXILIM Connect, connect thesmartphone with the camera over awireless LAN setting, and thenconfigure EXILIM Connect settingsusing “Setting up the camera”. *l Sending Images to a Smartphone

Automatically* Depending on the camera model, this

function may not be displayed or youmay not be able to change its setting.

2. On the camera, enter the REC mode andshoot.This will establish a wireless LANconnection between your camera andsmartphone, and send the snapshot youjust recorded to the smartphone.● With an EX-FR Series camera, images

are sent to the smartphone when thecamera enters the sleep mode.

EXILIM Connect 4.2

8

Important!

● The maximum size movie file that canbe sent by the camera’s Auto Send is100 MB.

● Some camera recording modes maynot allow auto send of images.

Note

● Auto Send cannot be enabled unlessthe camera is paired with asmartphone.

● Both a Bluetooth and wireless LANconnection are required between thecamera and smartphone to auto sendcamera images.

● With some camera models, you canspecify the size of snapshots sent tothe smartphone using the camera’s“Resize before send” feature.

● Auto Send is disabled while thecamera’s Airplane Mode setting is“On”. Auto Send become re-enabledwhen the setting is changed to “Off”.

● Images shot while the camera’s AutoSend setting is “On” will be sent to thesmartphone, even if the app’s AutoSend setting is changed to “Off” beforethe images are sent.

● Depending on the connected camera,turning off the camera while there areunsent images in memory will cause analert message to appear.If you want the images to be sent, leavethe camera on until the send operationis complete.Pressing the camera’s [ON/OFF](Power) again will turn off the camera.

● Depending on the connected camera,disconnection of the camera andsmartphone while there are unsentimages will cause an alert message toappear, and then the camera willautomatically turn off after about oneminute. In this case, the camera will tryto send the images again after it isturned back on.

Sending the Image Displayedon the Camera MonitorScreen to a Smartphone(Quick Send)

With some camera models, you can use theprocedure below to send an image displayedin the PLAY mode (including movies) to asmartphone by pressing the camera’s frontshutter button. After sending an image to asmartphone, you can then upload it to a socialnetworking service.

To assign the Quick Send functionto the front shutter button


1. Turn on the camera and enter the PLAYmode.

2. On the camera, press [MENU].

3. On the camera, select “Front Shutter” fromthe “PLAY MENU” and then press [SET].

4. On the camera, select “Quick Send” andthen press [SET].● Pressing the front shutter button sends

the displayed image to a smartphonevia wireless LAN.

To send the image on the cameramonitor screen to a smartphone


● Paired Camera ImagesIf there is a Bluetooth wireless technologyconnection between the camera andsmartphone, the connection icon (“ ”) on theEXILIM Connect top screen will be pink.

1. On the camera, display the images youwant to send to the smartphone.● To send one image from a CS, press

[SET] to start playback of the groupimages. When the image you want tosend is displayed, press [SET] again topause playback.

2. On the camera, press the front shutterbutton.This will establish a wireless LANconnection between your camera andsmartphone, and send the snapshot youjust recorded to the smartphone.● If there is no wireless LAN connection

between the camera and smartphone,use the smartphone’s Wi-Fi settings toselect the camera’s SSID to establish awireless LAN connection between thecamera and smartphone.

● On the smartphone, tapping “ ” whileimages are being received displays theimages.You can perform the operations belowafter image receive is complete.Share Album in Scene app :You can use the Scene app on thesmartphone to send images from thecamera to a smartphone.Preview photo in Scene app :You can use the Scene app on thesmartphone to view the imagesreceived from the camera.Send to SNS :Displays a screen for sending imagesto a social networking site.To TOP Panel :Exits this operation and returns to theTOP screen.

EXILIM Connect 4.2

9

● Un-paired Camera Images

1. On the camera, display the images youwant to send to the smartphone.● To send one image from a CS, press

[SET] to start playback of the groupimages. When the image you want tosend is displayed, press [SET] again topause playback.

2. On the camera, press the front shutterbutton.


4. On the smartphone, start up the “EXILIMConnect” app.This will send the images you selected tothe smartphone.● On the smartphone, tapping “ ” while

images are being received displays theimages.

5. After image send is complete, perform oneof the operations described below on thesmartphone.

Share Album in Scene app :You can use the Scene app on thesmartphone to send images from thecamera to a smartphone.Preview photo in Scene app :You can use the Scene app on thesmartphone to view the imagesreceived from the camera.Send to SNS :Displays a screen for sending imagesto a social networking site.To TOP Panel :Exits this operation and returns to theTOP screen.

Note

● If there is a wireless LAN connectionbetween the camera and smartphone,“ ” on the EXILIM Connect topscreen will be pink.


Sending Selected Images toa Smartphone

You can select recorded snapshots and/ormovies on the camera and send them to asmartphone.You can select files up to 500 MB for a singlesend operation.The number of files per send operationdepends on the connected camera model.Once an image is sent to the smartphone, youcan send it on to others via a social networkservice.This function is available on a cameraequipped with a monitor screen.● The camera operations you need to perform


Note


● Paired Camera ImagesIf there is a Bluetooth wireless technologyconnection between the camera andsmartphone, the connection icon (“ ”) on theEXILIM Connect top screen will be pink.


2. On the camera, select “Send to phone”,and then “Send Selected Image”.

3. Select all of the images you want to sendto the smartphone.

4. Send the images to the smartphone.This will establish a connection betweenthe smartphone and camera, and send theselected images to the smartphone.● If there is no wireless LAN connection

between the camera and smartphone,use the smartphone’s Wi-Fi settings toselect the camera’s SSID to establish awireless LAN connection between thecamera and smartphone.

● On the smartphone, tapping “ ” whileimages are being received displays theimages.You can perform the operations belowafter image receive is complete.Share Album in Scene app :You can use the Scene app on thesmartphone to send images from thecamera to a smartphone.Preview photo in Scene app :You can use the Scene app on thesmartphone to view the imagesreceived from the camera.Send to SNS :Displays a screen for sending imagesto a social networking site.To TOP Panel :Exits this operation and returns to theTOP screen.

Note


EXILIM Connect 4.2

10

● Un-paired Camera Images


2. On the camera, select “Send to phone”,and then “Send Selected Image”.

3. Select all of the images you want to sendto the smartphone.

4. Send the images to the smartphone.


6. On the smartphone, start up the “EXILIMConnect” app.This will send the images you selected tothe smartphone.● On the smartphone, tapping “ ” while

images are being received displays theimages.

7. After image send is complete, perform oneof the operations described below on thesmartphone.

Share Album in Scene app :You can use the Scene app on thesmartphone to send images from thecamera to a smartphone.Preview photo in Scene app :You can use the Scene app on thesmartphone to view the imagesreceived from the camera.Send to SNS :Displays a screen for sending imagesto a social networking site.To TOP Panel :Exits this operation and returns to theTOP screen.

Note


Adding Information toan Image

With some camera models, you can performthe steps below to add location information tosnapshots sent to the smartphone.

Adding Location Informationto Snapshots sent to theSmartphone

Important!

● Enabling location-based servicescauses the recording date, locationinformation, and other personallyidentifiable information to be includedin the snapshot data.Take care when sharing or publishingsuch images on web services, etc.

● Never use this camera for navigation,surveying, etc.

● Using Auto Send or Send SelectedImage

When images shot while “On” is selected forlocation information with the “Wirelesssettings” of the camera’s wireless mode aresent to the smartphone using “Auto Send”(Having the Camera Send Images to theSmartphone as They are Recorded (AutoSend)) or “Send Selected Image” (SendingSelected Images to a Smartphone), thesmartphone will add information about wherethe snapshot was shot.You can check whether or not locationinformation was added successfully on thesmartphone’s image receive screen. Whenthe smartphone receives multiple images atthe same time, “With geo tag” will be shown ifeven one of the images is receivedsuccessfully.

● Remote CaptureLocation information is added in the casesdescribed below. This is indicated by a “GPS”icon on the display.● Snapshots sent to the smartphone when the

EXILIM Connect Remote Capture screen(Operation Screen During RemoteCapture) Remote Capture setting ( ) has“Auto copy after shooting” enabled

● Snapshots sent to the smartphone using theEXILIM Connect Remote Capture screen(Operation Screen During RemoteCapture) Get images button ( )

Managing ImagesImages stored in camera memory can be usedby other applications and shared withacquaintances.

Using the EXILIM ALBUMApp

With the EXILIM ALBUM app, you canconfigure settings to generate an album of aday’s highlights automatically and enjoy re-living your memories.To use the EXILIM ALBUM app, you need toinstall it.For information about EXILIM ALBUM appoperation, refer to the EXILIM ALBUM appuser’s guide.


2. On the smartphone TOP screen (EXILIMConnect Top Screen), tap the “EXILIMALBUM” icon.This starts up the EXILIM ALBUM app.

EXILIM Connect 4.2

11

Storing Images in a SceneAlbum for Sharing withOthers

Settings can be configured so imagesreceived by the smartphone are automaticallystored in a Scene app album.To use the Scene app, you need to install it.You need to use the Scene app to create thealbum for the images.For information about Scene app operations,contact Ripplex Inc.



3. On the smartphone, tap “Share Album inScene app”.

4. On the smartphone, turn on “Share Albumin Scene app”.

5. Tap the album where you want the imagesto go.

6. Tap “Back” to return to the settings screen.

Sharing Snapshots with anUnpaired Smartphone (OneTime Share)

With some camera models, you can sharesnapshots you shoot for viewing onsmartphones that are not paired with thecamera.First you send the snapshots you want toshare to a smartphone that is paired with thecamera. Then the smartphone uploads thesnapshots to a Scene server and the cameradisplays a QR code.From there, images can be shared withanother smartphone that is not paired with thecamera by reading the QR code and thenconnecting to the Scene server on theInternet.● The camera operation and One Time Share

operation depend on the camera model. Forfull details, see the user documentation thatcomes with your camera.

The process by which snapshots areuploaded to the Scene server is describedbelow.① Snapshots you selected on the camera are

sent to the smartphone that is paired withthe camera.

② The snapshots are uploaded from thesmartphone to the Scene server.

The above steps are automatic. However, inorder for them to be performed, thesmartphone must be:● The Scene app installed.

The Scene app is an image managementapp by Ripplex Inc.For information about Scene appoperations, contact Ripplex Inc.

● Connected to the Internet.● Paired with the camera.l Pairing the Camera with a Smartphone

● iPhone (iOS): “Linked” selected for EXILIMConnect “Scene Link” setting.

● iPhone (iOS): To select “Linked” for theEXILIM Connect “Scene Link” setting

To use One Time Share, you must use theprocedure below to select “Linked” for the“Scene Link” setting.


2. On the smartphone, tap “Link with Sceneapp”.This will cause your iPhone to determinethe current “Scene Link” setting (“Linked”or “Not Linked”) and toggle to the oppositesetting.

● The following events will cause the “SceneLink” setting to change automatically to “NotLinked”.ー Unpairing with the camera and then re-

pairing againー Re-installing the Scene app

EXILIM Connect 4.2

12

Configuring CameraSettings

With some camera models, the functionsdescribed in this section become availablewhile there is a wireless LAN connectionbetween the camera and a smartphone.l Changing the Camera Password for

Wireless LAN Connectionl Configuring Camera Date and Time

Settingsl Sending Images to a Smartphone

Automaticallyl Configuring Camera Sound Settingsl Looking Up the Camera Versionl Initializing the Cameral Formatting Camera Memory

Changing the CameraPassword for Wireless LANConnection

Use the procedure below to change thepassword you use when establishing awireless LAN connection between the cameraand a smartphone.


2. On the smartphone, tap “Setting up thecamera”.

3. On the smartphone, tap “WLANpassword”.

4. Enter the new password.● For the password, enter eight single-

byte numerals.

5. After inputting the password, tap “Done”.This changes the camera password.

Note

● The new password will become validthe next time a wireless LANconnection is established between thecamera and smartphone.

Configuring Camera Dateand Time Settings



3. On the smartphone, tap “Adjust”.

4. Tap “Run”.This adjusts the camera’s current dateand time settings in accordance with thesmartphone settings.

Sending Images to aSmartphone Automatically



3. On the smartphone, turn on the “AutoSend” setting.Now the smartphone will be able toreceive images that are automatically sentfrom the camera as they are recorded.

Configuring Camera SoundSettings



3. On the smartphone, tap “Camera Sound”.

4. Select a camera sound.

Looking Up the CameraVersion



3. On the smartphone, look up “CameraVersion”.

Initializing the Camera



3. On the smartphone, tap “Reset”.

4. Tap “OK”.

Formatting Camera MemoryIf a memory card is loaded in the camera, thisoperation will format the memory card. It willformat built-in memory if no memory card isloaded.



3. On the smartphone, tap “Format”.

4. Tap “OK” twice.

EXILIM Connect 4.2

13

TroubleshootingQ1 I don’t know the camera name

required for pairing.● The camera name (SSID) will be displayed

after you enter the Wireless Mode on thecamera, and then select “Pairing”.On the screen that appears, check the“Device” item.If your camera is not equipped with amonitor screen, you can find its name(SSID) on the sheet that comes packed withit.

Q2 The camera won’t send movies.● Auto Send for movies is limited to 100 MB

per movie.When selecting images on a camera tosend to a phone (Send Selected Image,Quick Send), you can select up to 500 MBtotal. The number of files per send operationdepends on the connected camera model.When using smartphone operation toreceive movies (Viewing Images on aSmartphone), there is no limit.

Q3 I can’t establish a wireless LANconnection between the camera andsmartphone.

● If the smartphone or other device has a Wi-Fi connection auto switching function (autonetwork switching), the function may beaffecting the connection with the camera.Disable Wi-Fi connection auto switching(network auto switching) by clearing thesetting’s check box, etc.

● Delete the camera’s SSID from thesmartphone Wi-Fi settings, and then re-input it along with the required password.

Q4 A movie sent to a smartphone cannotbe viewed. I don’t know where themovie file is stored.

● Some terminals store movies in a foldernamed EXILIM Connect.You will require a movie player that supportsplayback of MOV type movie files.Depending on your movie player app, youmay not be able to playback movies and/oroutput audio.

Q5 I can’t establish a Bluetooth wirelesstechnology connection between thecamera and smartphone.

● Use Bluetooth low energy technology toconnect the camera with the smartphone.Confirm that the smartphone you are usingis Bluetooth low energy technologycompatible. If you are unsure whether itdoes, contact the manufacturer of yoursmartphone.

● Leaving Bluetooth on the smartphone set to“On” is recommended.

● The camera cannot connect with asmartphone if they are too far apart fromeach other.

Q6 Remote Capture shooting is notperformed when I tap “RemoteCapture” on the smartphone.

● To shoot with Remote Capture from asmartphone, you need to first pair thecamera and smartphone, and thenestablish a Bluetooth wireless technologyconnection between them (Pairing theCamera with a Smartphone).Next, perform a “Remote Capture”operation (Controlling the Camera andPerforming Remote Capture from aSmartphone).

● If the camera is not paired with thesmartphone, you will need to establish awireless LAN connection between them(Controlling the Camera and PerformingRemote Capture from a Smartphone).

Q7 I don’t see any images when I tap“View on Phone” on the smartphone.

● If you want to view images in cameramemory using your smartphone, you firstneed to pair the camera and smartphone,and then establish a Bluetooth wirelesstechnology connection between them(Pairing the Camera with a Smartphone).Next, perform a “View on Phone” operation(Viewing Images on a Smartphone).

● If the camera is not paired with thesmartphone, you will need to establish awireless LAN connection between them(Viewing Images on a Smartphone).

Q8 I can’t share images with an album.● If you do not have the Scene app installed

on the smartphone, install it.After installing the Scene app, start it up andcreate an album.For information about Scene appoperations, contact Ripplex Inc.

● Turn on “Share Album in Scene app” andselect the album where you want theimages to be stored.

Q9 Location information is not added tosnapshots sent to the smartphone.

● Pair the camera and smartphone, and thenestablish a Bluetooth wireless technologyconnection between them.

● Use the procedure described in the user’sguide to configure wireless settings and toselect “On” for location information.

● Make sure that the settings for locationinformation are enabled on yoursmartphone and app.

● Configure smartphone settings to acquirelocation information, and make sure it iswhere location information can be received.

EXILIM Connect 4.2

14

CopyrightsExcept for your own personal enjoyment,unauthorized use of snapshots or movies ofimages whose rights belong to others, withoutthe permission of the right holder, is forbiddenby copyright laws. In some cases, shooting ofpublic performances, shows, exhibitions, etc.may be restricted entirely, even if it is for yourown personal enjoyment. Regardless ofwhether such files are purchased by you orobtained for free, posting them on a website,a file sharing site, or any other Internet site, orotherwise distributing them to third partieswithout the permission of the copyright holderis strictly prohibited by copyright laws andinternational treaties. For example, uploadingor distributing on the Internet images of TVprograms, live concerts, music videos, etc.that were photographed or recorded by youmay infringe upon the rights of others. Notethat CASIO COMPUTER CO., LTD. shall notbe held liable for use of a camera in any waythat infringes on the copyrights of others orthat violates copyright laws.

The following terms, which are used in thismanual, are registered trademarks ortrademarks of their respective owners. Notethat trademark ™ and registered trademark ®symbols are not used within the text of thismanual.● iPhone is a trademark of Apple Inc.● iOS is a trademark or registered trademark

of Cisco Systems, Inc. of the United States.● Wi-Fi is a registered trademark of the Wi-Fi

Alliance.● The Bluetooth® word mark and logos are

registered trademarks owned by BluetoothSIG, Inc. and any use of such marks byCASIO COMPUTER CO., LTD. is underlicense. Other trademarks and trade namesare those of their respective owners.

● The word “QR Code” is registeredtrademark of DENSO WAVEINCORPORATED in Japan and othercountries.

● EXILIM, EXILIM Connect and EXILIMALBUM are registered trademarks ortrademarks of CASIO COMPUTER CO.,LTD.

● All other company or product namesmentioned herein are registeredtrademarks or trademarks of theirrespective companies.

Any and all unauthorized copying, distribution,and transfer for commercial purposes of thesoftware provided by CASIO are prohibited.

EXILIM Connect 4.2

15

ma1705-a © 2017 casio computer co., ltd. exilim connect 4 · a movie file sent from the camera to...

Documents