machine range - rudd.com.au€¦ · power source weight 25.5kg power source warranty 2 years. 2...
TRANSCRIPT
www.bossweld.com.au Powered by
MACHINERANGE
2018/19
Part Number Description
660200 Bossweld 200E AC/DC TIG Welder
Technical Data 200 E AD/DC
Power Supply: 1 Phase 240V 50HZ +/-10%
Yes
15A Primary Input Plug Fitted Yes
Duty Cycle @ 40°c TIG 35% @ 200A
Duty Cycle @ 40°c MMA 50% @ 170A
Open Circuit Voltage 66.0V
Output Current Range TIG (AC) 10-200 Amps
Output Current Range TIG (DC) 10-170 Amps
Output Current Range MMA 10-170 Amps
I Max TIG 33.5A
I Max MMA 36.9A
I ieff TIG 19.8A
I ieff MMA 23.3A
Power factor 0.68
Protection Class IP23
Insulation Class H
Electrode Diameter Range 1.6-4.0mm
Thermal Overload Protected Yes
For use with generators Yes
Power Source Dimensions 48 x 14 x 24cm
Power Source Weight 10Kg
Power Source Warranty 2 Years
Part Number Description
660205 Bossweld DigiPro TIG 200 AC/DC PFC TIG Welder
Technical Data DIGIPRO TIG 200
Power Supply: 1 Phase 240V 50HZ +/-10%
Yes
15A Primary Input Plug Fitted Yes
Duty Cycle @ 40°c MMA 35% @ 200A
Duty Cycle @ 40°c TIG 40% @ 200A
Open Circuit Voltage 67.0V
Output Current Range TIG (AC) 10-200 Amps
Output Current Range TIG (DC) 10-170 Amps
Output Current Range MMA 10-170 Amps
I Max TIG 19.7A
I Max MMA 30.4A
I ieff TIG 15A
I ieff MMA 22.8A
Power factor 0.99
Protection Class IP23
Insulation Class H
Electrode Diameter Range 1.6-4.0mm
Thermal Overload Protected Yes
For use with generators Yes*
Power Source Dimensions 51 x 19 x 34cm
Power Source Weight 14.5Kg
Power Source Warranty 2 Years
Part Number Description
660345 Bossweld DigiPro TIG 345 AC/DC TIG Welder
Technical Data DIGIPRO TIG 200
Power Supply: 3 Phase 415V 50HZ +/-10%
Yes
Duty Cycle @ 40°c MMA 60% @ 320A, 100% @ 250A
Duty Cycle @ 40°c TIG 60% @ 320A, 100% @ 250A
Open Circuit Voltage 61V
Output Current Range TIG 10-320 Amps
I Max TIG 21A
I Max MMA 27.5A
I ieff TIG 15A
I ieff MMA 19A
Power factor 0.65
Protection Class IP23
Insulation Class H
Electrode Diameter Range 1.6-5.0mm
Thermal Overload Protected Yes
For use with generators Yes
Power Source Dimensions 55 x 24 x 44.5cm
Power Source Weight 25.5Kg
Power Source Warranty 2 Years
2YEARLIMITED
WARRANTY
INVERTERWELDER
MST195
MMIG
INVERTERPOWER
PLUG15 Amp
PLATE THICKNESSup to 10mm mild steel
IDEAL WIRE SIZE0.9mm
MATERIAL TYPEAluminium (MIG only), Mild Steel, Stainless Steel, Brass, Cast Iron
DUTY CYCLE17% at 180Amps
DIY
TR
AD
ETR
AD
EP
RO
FESSIO
NA
L
SSTICK
TTIG
INVERTERWELDER MST195MMIG
INVERTERPOWER
Part Number 610090
Power Supply 240V
Primary Input Plug Fitted 15 Amps
Duty Cycle 17% @ 180 Amps60% @ 120 Amps100% @ 90 Amps
Open Circuit Voltage 71V
Output Current Range MIG: 40-180 AmpsMMA: 10-180 AmpsTIG DC: 10-180 Amps
I ieff MIG: 15 AmpsMMA: 15 AmpsTIG: 15 Amps
Input Current Max MIG: 37 AmpsMMA: 42 AmpsTIG: 26 Amps
Power factor 0.7
Protection Class IP21
Insulation Class H
Wire Diameter Max 0.9mm
Electrode Diameter Max 4.0mm
Thermal overload protected Yes
Generator Capacity KVA 8.0
Machine Dimensions 470 x 215 x 400mm
Machine Weight 12kg
TECHNICAL SPECS
FAN ONDEMAND
TIG TORCH CONTROL PLUG
HEAVY DUTYCARRY HANDLE DURABLE
METAL HOUSING
VIVID EASY READ DIGITAL DISPLAY
EURO TORCH CONNECTOR
Aluminium (MIG only) 8
Mild Steel 10
Stainless Steel 10
Brass 6
Cast Iron 8
WIRE/ELECTRODE SIZE MAX
MATERIAL PLATE THICKNESSMAX (mm)
IN THE BOX (KEY COMPONENTS)
3m 15 Series MIG Torch
Welding Earth Lead
Electrode Holder Lead
Gas Hose
SSTICK
TTIG
POSITIVE OUTPUT TERMINAL
POSITIVE OUTPUT TERMINAL
QUICKCONNECT GAS OUTLET (TIG)
LARGE EASY GRIP ADJUSTMENT KNOBS
Wire 0.9mm
Electrode 4.0mm
Dual Stage Argon Regulator
Drive Roller1 x Gasless
1 x Steel (Fitted)
Torch Spares Cable/Lead Tidy
OPTION / UPGRADEPART NO. DESCRIPTION
95.26F.4.1.SW12A Tig Torch 26, 4mt, 1 pc, Switch, Dinse 50
95.26F.8.1.SW12A Tig Torch 26, 8mt, 1 pc, Switch, Dinse 50
www.bossweld.com.au Powered by
MST X250 PFC250 AMP MULTIPROCESS MIG/MMA/TIG INVERTER WELDER
4 roll wire feed
system
MST X250 PFC
www.bossweld.com.au Powered by
TECHNICAL DATA
ORDERING INFO
Part Number Description
600592 Bossweld MST X250 PFC Multiprocess Welder
The Bossweld MST X250 PFC is a lightweight and portable multi process in-verter based welder that gives the welder the possibility to MIG, Stick and TIG weld, making it the ideal choice for your next welding project.
FEATURES• IGBT Inverter Technology• Digital Control• Power Factor Correction 97%• Euro Torch Connection• Dinse 35/50 Lead connections• Fan Cooled• Simple to operate • Stepless Voltage control• Stepless Amperage control• Stepless wire feeding Control• 2T/ 4T Trigger latching function• Lightweight Industrial• Suits 5Kg (D200) & 15Kg (D300)
MIG Spools• 4 roll wire feed system• Wire feed Inching function• Burnback pre/post gas• Downslope adjustment in liftig• Spool gun ready
PROCESS• DC Stick (MMA) welding• DC TIG welding (lift start)• Gas and Gasless Mig welding
PACKAGE INCLUSIONS• Power Source• Argon Regulator Twin Gauge (400210)• BZ 24 4mt Mig Torch (92.ER.24.4)• 3mt Electrode & Earth lead set• 0.8-1.0mm Drive Roller (Fitted)• 3mt Gas Hose• Operators Manual
OPTIONS/UPGRADES• 4mt Agility 26F Tig Torch
(95.26F.4.1.SW9MA)• 8mt Agility 26F Tig Torch
(95.26F.8.1.SW9MA)
Technical Data MST X250 PFC
Power Supply: 1 Phase 220V 50-60 HZ +/-10%
Yes
15A Primary Input Plug Fitted Yes
Duty Cycle @ 40°c MMA 30% @ 250A
Duty Cycle @ 40°c MIG 35% @ 250A
Open Circuit Voltage 66.0V
Output Current Range MIG 40-250 Amps
Output Current Range MMA 10-250 Amps
I Max MIG 43A
I Max MMA 44A
I ieff MIG 25.4A
I ieff MMA 24A
Power factor 0.97
Protection Class IP23
Insulation Class H
MIG Wire Diameter Range 0.6-1.2mm
Electrode Diameter Range 1.6mm-5.0mm
Thermal Overload Protected Yes
For use with generators Yes*
Power Source Dimensions 63.5 x 24 x 43cm
Power Source Weight 25Kg
Power Source Warranty 2 Years
SIMPLE TO OPERATE
FINE ADJUSTMENTS
4 ROLL WIRE FEEDER
*Please note: when using this machine with a generator; the generator must have AVR Automatic Voltage Regulation
www.bossweld.com.au Powered by
POWERPRO 250250 AMP MULTIPROCESS MIG/MMA/TIG INVERTER WELDER
POWERPRO 250
www.bossweld.com.au Powered by
TECHNICAL DATA
The Bossweld PowerPro 250 is a multi process inverter based welding power source that gives the welder the possiblity to MIG, Stick and TIG weld all from the one unit.
FEATURES• IGBT Inverter Technology• MMA/TIG Function Switch• Euro Torch Connection• Dinse 35/50 Lead connections• Fan Cooled• Simple to operate • Stepless Voltage control• Stepless Amperage control• Stepless wire feeding Control• Gun Hanger fitted• Soft Start wire feeding system• Internal wire feeder system• 4 roll wire feed system• Spool Gun Ready
PROCESS• MIG Welding• DC Stick (MMA) Welding• DC TIG Welding Lift Arc• Gas/Gasless MIG Welding
PACKAGE INCLUSIONS• Power Source• Argon Regulator Twin Gauge (400210)• BZ 24 4mt Mig Torch (92.ER.24.4)• 3mt Electrode & Earth lead set• 0.8-1.0mm Drive Roller (Fitted)• 0.9-1.2mm Drive Roller (Spare)• 3mt Gas Hose 8mm ID• Operators Manual
OPTIONS/UPGRADES• Spool Gun (97.SPG.6.5)• 4mt Agility 26FV Tig Torch
(95.26FV.4.1.DA50)• 8mt Agility 26FV Tig Torch
(95.26FV.8.1.DA50)ORDERING INFO
Part Number Description
600250 Bossweld PowerPro 250
Technical Data POWERPRO 250
Power Supply: 1 Phase 240V 50-60 HZ +/-15%
Yes
Rated Power MIG 9.2 KVA
Rated Power MMA 8 KVA
Welding Voltage Range MIG 15.8-26.5V
Duty Cycle @ 40°c MMA 60% @ 220A
Duty Cycle @ 40°c MIG 60% @ 250A
Open Circuit Voltage 62V
Output Current Range MIG 35-250 Amps
Output Current Range MMA 10-220 Amps
I Max MIG 34.9A
I Max MMA 33.4A
I ieff MIG 27A
I ieff MMA 25.9A
Power factor 0.85
Protection Class IP21S
Insulation Class F
MIG Wire Diameter Range 0.6-1.2mm
Electrode Diameter Range 1.6 x 4.0mm
Thermal overload protected Yes
For use with Generators Yes
Power Source Dimensions 103 x 31 x 75cm
Power Source weight 45 Kgs
Power Source Warranty 2 Years
GUN HANGER EURO CONNECT TORCH
4 ROLL WIRE FEEDER
www.bossweld.com.au Powered by
POWERPRO 350350 AMP MULTIPROCESS MIG/MMA/TIG INVERTER WELDER
POWERPRO 350
www.bossweld.com.au Powered by
TECHNICAL DATA
FEATURES• IGBT Inverter Technology• MMA/TIG Function Switch• Euro Torch Connection• Dinse 35/50 Lead connections• Fan Cooled• Simple to operate • Stepless Voltage control• Stepless Amperage control• Stepless wire feeding Control• Gun Hanger fitted• Soft Start wire feeding system• Internal wire feeder system• 4 roll wire feed system• Spool Gun Ready
PROCESS• MIG Welding• DC Stick (MMA) Welding• DC TIG Welding Lift Arc• Gas/Gasless MIG Welding
PACKAGE INCLUSIONS• Power Source• Argon Regulator Twin Gauge (400210)• BZ 36 4mt Mig Torch (92.ER.36.4)• 3mt Electrode & Earth lead set• 0.8-1.0mm Drive Roller (Fitted)• 0.9-1.2mm Drive Roller (Spare)• 3mt Gas Hose 8mm ID• Operators Manual • Note: Primary Plug not fitted
OPTIONS/UPGRADES• Spool Gun (97.SPG.6.5)• 4mt Agility 26FV Tig Torch
(95.26FV.4.1.DA50)• 8mt Agility 26FV Tig Torch
(95.26FV.8.1.DA50)
ORDERING INFOPart Number Description
600350 Bossweld PowerPro 350
Technical Data POWERPRO 350
Power Supply: 3 Phase 415V 50-60 HZ +/-15%
Yes
Rated Power MIG 11 KVA
Rated Power MMA 9.5 KVA
Welding Voltage Range MIG 16.5-29V
Duty Cycle @ 40°c MMA 60% @ 250A
Duty Cycle @ 40°c MIG 60% @ 300A
Open Circuit Voltage 60V
Output Current Range MIG 50-300 Amps
Output Current Range MMA 10-250 Amps
I Max MIG 22.6A
I Max MMA 19.5A
I ieff MIG 17.4A
I ieff MMA 15.1A
Power factor 0.85
Protection Class IP21S
Insulation Class F
MIG Wire Diameter Range 0.6-2.0mm
Electrode Diameter Range 1.6 x 5.0mm
Thermal overload protected Yes
For use with Generators Yes
Power Source Dimensions 103 x 31 x 75cm
Power Source weight 47 Kgs
Power Source Warranty 2 Years
The Bossweld PowerPro 350 is a multi process inverter based welding power source that gives the welder the possiblity to MIG, Stick and TIG weld all from the one unit.
GUN HANGER EURO CONNECT TORCH
4 ROLL WIRE FEEDER
www.bossweld.com.au Powered by
POWERPULSE 250PFCDUAL PULSE SYNERGICMULTI FUNCTION INVERTER WELDER
30%DUTY CYCLEAT 250AMPS
PFC POWER FACTOR
CORRECTION
POWERPULSE 250PFC
www.bossweld.com.au
ORDERING INFOPart Number Description
660250 Bossweld Powerpulse 250PFC
The POWERPULSE 250PFC machine is a new inverter-based MIG/MMA/TIG Welding machine with Synergic Programs and Dual pulse functions. The MIG function allows you to weld with Gas Shielded wire applications giving excellent, professional welding results. Easy step-less adjustment of voltage and wire feed coupled with integrated digital meters allows easy setting of welding parameters. POWERPULSE 250PFC features MIG welding with Synergic welding programs designed for ease of use with your selected gas mixture. The operator selects the gas mixture and wire diameter they are using then simply start welding. Once this is done the operator can make fine adjustments to the voltage for even greater control of the weld pool. The added Lift-Arc DC TIG capability delivers perfect arc ignition every time and a remarkably smooth stable arc produces high quality TIG welds. TIG functionality includes adjustable Down Slope & Post Gas as well as being gas solenoid-valve equipped. An additional feature is the Spool Gun ready function that allows the simple connection of Spool Gun for the use of thin or softer wires that don’t have the column strength to feed through MIG torches, such as aluminum wire. In the JOB mode, 100 different JOB records can be stored and recalled, The POWERPULSE 250PFC machine has built-in automatic protection function to protect the machines from over-voltage, over-current and over-heat. If any one of the above problems happens, the alarm lamp on the front panel will be lit and output current will be shut off automatically for the machine to protect itself and prolong the equipment using life.
PACKAGE INCLUSIONS• Bossweld 250A MST Double Pulse Mig 240V • Bossweld Binzel Style BZ36 Complete MIG Torch Ergon 3Mt• Argon Twin Gauge Regulator• 3mt Gas Hose with Quick connection• Arclead Set 230A 6Mt EH/4Mt EC• 2 x Bossweld Drive Roller 1.0/1.2mm U Groove (Aluminium) • 2 x Bossweld Drive Roller 0.8/1.0mm V Groove (Mild Steel)• Bossweld Binzel Style Red Teflon Liner 0.9 - 1.2mm 3Mt
Technical Data POWERPULSE 250PFC
Power Supply: 1 Phase 240V 50-60 HZ +/-15%
Yes
Welding Voltage Range MIG 14.8-26.5V
Duty Cycle @ 40°c MIG/TIG/MMA 30% @ 250A
Open Circuit Voltage 55.3V
Output Current Range MIG 15-250Amps
Output Current Range TIG/MMA 10-250Amps
I Max MIG 35Amp
I Max MMA 40Amp
I ieff MIG 19Amp
I ieff MMA 22Amp
Power factor 0.99
Protection Class IP23
Insulation Class H
MIG Wire Diameter Range
Mild Steel: 0.6/0.8/0.9/1.0/1.2 Stainless Steel: 0.8/0.9/1.0/1.2Flux-Cored: 0.6/0.8/0.9/1.0/1.2
Aluminium :1.0/1.2
Electrode Diameter Range 1.6mm - 5.0mm
Thermal overload protected Yes
Power Source Dimensions 69 x 24 x 45cm
Power Source weight 27Kg
Power Source Warranty 2 Years
TECHNICAL DATA
FEATURES• New PWM technology and IGBT inverter technology.• Active PFC technology for increased duty cycle and energy efficiency. • MIG/MAG with Pulse SYN/Dual pulse SYN/Manual and SYN function
- Synergic programs for aluminum, mild steel, stainless steel and CuSi - JOB mode (Save and call 100 different job records) - 2T /4T/S4T/Spot Weld welding mode - Function parameter adjustment
• MMA function (Stick electrode) - Hot start (improves electrode starting) - Adjustable Arc Force
• DC TIG - Lift Arc ignition (prevents tungsten sticking during arc ignition) - 2T /4T Trigger Control - Adjustable Down slope - Gas/air cooling mode
• Internal wire feeder, gear driven for up to 300mm Ø spool• Euro style MIG torch connection • IP23 rating for environmental/safety protection • Spool Gun Connection
Powered by
1
2
3
4
5
6
7
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SYNERGIC PROGRAMS INDICATORSelect from a list of Preset programs, This will set the machine for the correct wire size, wire type and gas being used, Program number will be displayed to the left digital display
WELDING VOLTS INDICATORValue will be displayed on the left digital display.
ARC LENGTH INDICATORAdjustable from -10.0 to +10.0 The higher the value, the longer arc length, The lower the value the shorter the arc length.Value will be displayed on the left digital display.
INDUCTANCE INDICATORAdjustable from -10.0% to +10.0%Value will be displayed on the left digital display.
MATERIAL THICKNESS INDICATORValue will be displayed on the right digital display.This will vary depending on synergic program selection.
WIRE SPEED INDICATORValue will be displayed on the right digital display.
WELDING CURRENT INDICATOR Value will be displayed on the right digital display.
8
SPOOLGUN
JOB INDICATORSaved job numbers will be displayed to the right digital display, Use R parameter dial (13)
POWERPULSE 250PFC- CONTROL PANEL
SPOOLGUN
1 2 3 4 5 6 7 8 109 11
12 13 14 1615 17
9
10
11
16
12
13
14
15
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
WIRE INCH BUTTONPress and hold to feed wire
GAS CHECK BUTTONPress and hold to check gas flow
WELDING PROCESS BUTTON- MIG-MAG Pulse Synergic- MIG-MAG Dual Pulse Synergic- MIG-MAG Manual- MIG-MAG Synergic- MMA- TIG
TRIGGER MODE SELECT BUT-TON- 2T- 4T- S4T- SPOT WELD
L PARAMETER SELECT / ADJUSTMENT KNOBUse this knob to select fuctions and adjust parameters
R PARAMETER SELECT / ADJUSTMENT KNOBUse this knob to select fuctions and adjust parameters
JOB BUTTON In the JOB mode, 100 different JOB records can be stored and called, Improve the quality of welding process.
PROGRAM SAVE / DELETE Save current setting you need to press Job button first and then select a job number that is not being used this will be indicated by - - - on the left digital display, job number is displayed on the right digital display,or delete programed job number
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
PRE GAS Selection for gas flow time prior to the arc startingAdjustable from 0 - 5 sec
POST GAS Selection for gas flow time after the arc finishes.Adjustable from 0 - 10 sec
SLOW FEED TIME This function is used to regulate the speed of wire feeding increasing.Adjustable from 0 - 10 sec
BURNBACK Control sets the amount of wire to ‘burn back’ after you release the trigger of your torch.Adjustable from 0 - 10
SPOT WELD TIME Is the time during which welding current is applied to the metal sheetsAdjustable from 0 - 10 sec
DELTA PULSE CURRENT The difference between base current and peak current in pulse welding.20-200
DUAL PULSE FREQUENCY Set pulse frequency, regulating the value of time T, namely, ripple pattern of density regulation. Higher Hz produces many short ripples with slightly lower penetration.Adjustable from 0.5 - 3.0Hz
DUAL PULSE DUTY Set strong pulse time (peak) for penetration and low-frequency cycle ratio (cooling), namely the regulation of the proportion of the ripple pattern on weld puddle surface and resulting depth in groove.Adjustable from 10 - 90%
DUAL PULSE BASE CURRENT PERCENT Sets the current of the low/ base pulse.Adjustable from -10 - +10
SPOOLGUN
17
FUNCTION BUTTON Press to scroll through weld function settingsParameters will be displayed to both digital displaySee below for function settings
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
SPOOLGUN
START CURRENT PERCENT Available in 4T trigger mode, sets a welding current 10-200% of the main welding current activated when the trigger is held on to ‘latch’ the trigger before the main weld current is started. Once the trigger is released, the current will go through the upslope period if it is set, to the main welding currentAdjustable from 1 - 200%
START CURRENT ARC LENGTH In S4T welding mode, excessive arc length will lead to more spatters and unsightly welds, so it is necessary to set reasonalbe quantity.Adjustable from -10 - +10
END CURRENT PERCENT 4T trigger mode only, sets a welding current 10-200% of the main welding current ac-tivated when the trigger is held on to ‘unlatch’ the trigger before the weld is finished. If downslope is set, the current will go through the downslope period before going to the end current set. When the trigger is released, the arc will stop.Adjustable from 10%-200%
END CURRENT ARC LENGTH S4T welding mode, excessive arc length will lead to more spatters and unsightly welds, so it is necessary to set reasonalbe quantity.Adjustable from 0 - 10
HYDROCOOLING Select water coolling ON or OFF
SPOOL GUN Spool Gun ON or OFF
HOT START Electrode Pre-heating on the weld start. Makes electrode priming easier and prevents it from sticking when cold
ARC FORCEAlso called Dig and Arc Control. Gives a power source variable additional amperage during low voltage (short arc length) conditions while welding. Helps avoid “sticking” stick electrodes when a short arc length is used.Adjustable from 0 - 10
DOWN SLOPE Selection for the transition time from Peak Amperage to Finish Amperage.Adjustable from 0 - 10
SPOOLGUN
FUNCTION BUTTON Press to the functiopn button to exit settings
POWERPULSE 250PFC- WELD CYCLE.
www.bossweld.com.auPowered by