machine tools

Tariff Description ===========================================================================

Item 50 applies unless otherwise stated.

8467.21.00 HAMMERS, ROTARY, electropneumatic Op. 01.01.2002 Dec. 01.01.2002 - TC 0106622 8467.21.00 HAMMERS, ROTARY, having BOTH of the following: (a) maximum speed NOT exceeding 1 750 r/min; (b) impact hammer rate NOT exceeding 6 000 blows/min Op. 01.01.2002 Dec. 01.01.2002 - TC 0106623 8467.21.00 DRILLS Op. 01.01.2002 Dec. 01.01.2002 - TC 0106838 8467.21.00 DRILL KITS OR DRIVER DRILL KITS, including bits, whether or not including ANY of the following: (a) case; (b) battery; (c) battery charger; (d) chuck key; (e) torch; (f) pencils; (g) rules; (h) tape measures; (i) pliers; (j) knives; (k) handsaws; (l) sockets; (m) bit and socket holders; (n) set squares; (o) hand screwdrivers; (p) nail and centre punches; (q) any other goods not affecting the essential character of the kit as a drill or driver drill Op. 01.01.2002 Dec. 10.01.2002 - TC 0109357 8467.22.00 KITS, JIGSAW, comprising ALL of the following: (a) jigsaw; (b) timber blade; (c) dust extraction adapter; (d) allen key; (e) guide fence; (f) carry case Op. 08.09.2008 Dec. 28.11.2008 - TC 0829953 8467.22.00 KITS, RECIPROCATING SAW, comprising ALL of the following: (a) reciprocating saw; (b) blades; (c) allen key; (d) carry case Op. 08.09.2008 Dec. 28.11.2008 - TC 0829956 8467.22.00 BANDSAWS Op. 01.01.2002 Dec. 01.01.2002 - TC 0106624 8467.22.00 JIGSAWS, having BOTH of the following: (a) net operating weight of 2.2 kg or greater; (b) continuous rated input current to AS 3160-1981 of 2 A or greater Op. 01.01.2002 Dec. 01.01.2002 - TC 0106626 8467.22.00 JIGSAWS, DC operated only Op. 01.01.2002 Dec. 01.01.2002 - TC 0106627



8467.22.00 JIGSAWS, having BOTH of the following: (a) power input rating of NOT less than 750 W; (b) power output rating of NOT less than 500 W Op. 01.01.2002 Dec. 01.01.2002 - TC 0106628 8467.22.00 SAWS, meat, having a maximum weight NOT exceeding 10 kg Op. 01.01.2002 Dec. 01.01.2002 - TC 0106665 8467.22.00 SAWS, sabre Op. 01.01.2002 Dec. 01.01.2002 - TC 0106666 8467.22.00 SAWS, circular, having BOTH of the following: (a) a pipe clamp; (b) a capability to cut steel pipes having an OD NOT exceeding 60 mm Op. 01.01.2002 Dec. 01.01.2002 - TC 0106708 8467.22.00 SAWS, chain Op. 01.01.2002 Dec. 01.01.2002 - TC 0106710 8467.22.00 RECIPROCATING SAWS, including jigsaws Op. 01.01.2002 Dec. 01.01.2002 - TC 0106839 8467.22.00 KITS, POWER TOOL, comprising AT LEAST FOUR of the following: (a) drill AND/OR driver; (b) saw; (c) battery charger; (d) battery; (e) carry case Op. 01.01.2002 Dec. 10.01.2002 - TC 0109358 8467.22.00 POWER TOOL SETS, comprising ALL of the following: (a) impact driver drill; (b) circular saw; (c) torch; (d) electronic multi volt charger; (e) battery packs Op. 01.01.2002 Dec. 10.01.2002 - TC 0109359 8467.22.00 SAWS, oscillating Op. 01.01.2002 Dec. 10.01.2002 - TC 0109360 8467.22.00 SAWS, CIRCULAR Op. 06.09.2002 Dec. 18.11.2002 - TC 0208252 8467.29.00 HAND TOOL SETS, PIPE FITTINGS, comprising ALL of the following: (a) electro hydraulic hand tool; (b) battery charger; (c) batteries; (d) clamping jaws; (e) ball headed pins; (f) pipe cutter; (g) pipe gripper; (h) expander; (i) expander head; (j) lubricant; (k) cleaning brush; (l) spanner; (m) transport case Op. 02.03.2009 Dec. 22.05.2009 - TC 0907081



8467.29.00 BISCUIT JOINERS, having ALL of the following: (a) electric motors; (b) dust collection bags; (c) bevel and height adjusters; (d) soft grip handles Op. 09.01.2009 Dec. 03.04.2009 - TC 0900155 8467.29.00 TOOLS, in sets, comprising BOTH of the following: (a) jigsaws; (b) sanders Op. 06.01.2006 Dec. 24.03.2006 - TC 0601896 8467.29.00 TOOLS SETS, comprising BOTH of the following: (a) sanders; (b) grinders, but NOT including chainsaw grinders Op. 18.01.2006 Dec. 10.04.2006 - TC 0602380 8467.29.00 BLOWERS AND/OR SWEEPERS, GARDEN Op. 21.12.2006 Dec. 16.03.2007 - TC 0620041 8467.29.00 TOOLS, COMPRESSION, ELECTROHYDRAULIC, hand operated, having BOTH of the following: (a) output force NOT less than 50 kN; (b) weight NOT greater than 15 Kg Op. 16.05.2007 Dec. 27.07.2007 - TC 0707310 8467.29.00 KITS, ROTARY TOOL, having a spindle speed NOT less than 18 000 r/min and a chuck capacity NOT greater than 3 mm, consisting of ALL of the following: (a) rotary tools; (b) tool stands; (c) vacuum adapters; (d) flexible shafts; (e) cutting guides; (f) angle attachments; (g) angle attachment shafts; (h) spindle nuts; (i) grinding stones; (j) cut-off wheels; (k) brushes; (l) polishing wheels; (m) polishing tips; (n) sanding bands; (o) drum sanders; (p) sanding discs; (q) flap wheels; (r) diamond wheel points; (s) cutters; (t) bits; (u) collet nuts; (v) mandrels; (w) collet wrenches; (x) L keys; (y) dressing stones; (z) tool kit boxes Op. 25.06.2007 Dec. 07.09.2007 - TC 0709854 8467.29.00 KITS, PAINT SCRAPER having an output NOT greater than 200 W, consisting of BOTH of the following: (a) cutting blades; (b) kit boxes Op. 14.11.2007 Dec. 29.01.2008 - TC 0719544



8467.29.00 KITS, POWER TOOL, comprising ALL of the following: (a) sanding plates; (b) sanding sheets; (c) stopping knives; (d) saw blades; (e) power tools Op. 07.11.2007 Dec. 05.02.2008 - TC 0801963 8467.29.00 TOOLS, COMPRESSION, ELECTROHYDRAULIC, hand operated, battery powered, with or without ANY of the following: (a) carry case; (b) battery charger; (c) spare battery; (d) crimping jaws Op. 14.07.2008 Dec. 03.10.2008 - TC 0817806 8467.29.00 KITS, ROUTER, comprising ALL of the following: (a) plunger router; (b) collet; (c) spanner; (d) guide fence; (e) dust extraction adaptor; (f) centring pin; (g) template guide; (h) carry case Op. 05.09.2008 Dec. 28.11.2008 - TC 0829888 8467.29.00 KITS, DETAIL SANDER, comprising ALL of the following: (a) sander; (b) dust bag; (c) sanding sheets; (d) carry case Op. 08.09.2008 Dec. 28.11.2008 - TC 0829952 8467.29.00 CLEANING MACHINES, drain pipe Op. 01.01.2002 Dec. 02.01.2002 - TC 0106667 8467.29.00 CUT OFF MACHINES, metal or masonry, AC operated ONLY, having BOTH of the following: (a) wheel dia capacity NOT exceeding 305 mm; (b) cutting depth NOT exceeding 150 mm Op. 01.01.2002 Dec. 02.01.2002 - TC 0106668 8467.29.00 CUTTERS, groove, having BOTH of the following: (a) a maximum blade dia of 120 mm; (b) a maximum blade width of 36 mm Op. 01.01.2002 Dec. 02.01.2002 - TC 0106670 8467.29.00 CUTTERS, iron or steel bar, shear action Op. 01.01.2002 Dec. 02.01.2002 - TC 0106672 8467.29.00 EDGE BANDING MACHINES, veneer strip, hot air adhesive melting Op. 01.01.2002 Dec. 02.01.2002 - TC 0106673 8467.29.00 ELECTROHYDRAULIC, HAND OPERATED PORTABLE COMPRESSION TOOLS, compression force up to 12 t, powered by rechargable nickel cadmium batteries Op. 01.01.2002 Dec. 02.01.2002 - TC 0106674 8467.29.00 ENGRAVING TOOLS, but NOT including such tools imported with ANY interchangeable tools Op. 01.01.2002 Dec. 02.01.2002 - TC 0106679



8467.29.00 MIXERS, AC operated ONLY, having BOTH of the following: (a) net operating weight (excluding tools and accessories) NOT less than 2.5 kg; (b) continuous rated input current (to AS 3160) NOT less than 2.3 A Op. 01.01.2002 Dec. 02.01.2002 - TC 0106681 8467.29.00 EXPANDERS, metal tube Op. 01.01.2002 Dec. 02.01.2002 - TC 0106682 8467.29.00 GRINDERS, but NOT including chainsaw grinders Op. 01.01.2002 Dec. 02.01.2002 - TC 0106683 8467.29.00 GUNS, caulking, DC operated ONLY, but NOT including such tools imported with EITHER of the following: (a) battery charging devices; (b) power adaptors Op. 01.01.2002 Dec. 02.01.2002 - TC 0106686 8467.29.00 HAMMERS, power, demolition or percussion, having a non-rotating working tool Op. 01.01.2002 Dec. 02.01.2002 - TC 0106687 8467.29.00 MARKING TOOLS, electrochemical Op. 01.01.2002 Dec. 02.01.2002 - TC 0106688 8467.29.00 NAILERS OR STAPLERS Op. 01.01.2002 Dec. 02.01.2002 - TC 0106689 8467.29.00 NIBBLERS OR SHEARS, sheet metal Op. 01.01.2002 Dec. 02.01.2002 - TC 0106690 8467.29.00 PLANES Op. 01.01.2002 Dec. 02.01.2002 - TC 0106691 8467.29.00 POLISHERS, optical fibre Op. 01.01.2002 Dec. 02.01.2002 - TC 0106692 8467.29.00 POLISHERS, SANDERS, SANDER/GRINDERS OR SANDER/POLISHERS, right angle drive rotary disc type, but NOT including EITHER of the following: (a) such goods when imported with battery charging devices or power adaptors; (b) such goods able to be fitted with chucks Op. 01.01.2002 Dec. 02.01.2002 - TC 0106693 8467.29.00 TRIMMERS, laminate Op. 01.01.2002 Dec. 08.01.2002 - TC 0106814 8467.29.00 VIBRATORS, concrete, immersion head type Op. 01.01.2002 Dec. 07.01.2002 - TC 0106820 8467.29.00 WRENCHES Op. 01.01.2002 Dec. 08.01.2002 - TC 0106821 8467.29.00 SANDERS Op. 01.01.2002 Dec. 02.01.2002 - TC 0106834 8467.29.00 TRIMMERS, hedge Op. 01.01.2002 Dec. 08.01.2002 - TC 0106836



8467.29.00 WAXING AND POLISHING MACHINES, random orbital, hand-held with self-contained electric motor Op. 01.01.2002 Dec. 08.01.2002 - TC 0106837 8467.29.00 LINE TRIMMERS Op. 01.01.2002 Dec. 02.01.2002 - TC 0106841 8467.29.00 CUTTERS, cable or wire rope Op. 01.01.2002 Dec. 02.01.2002 - TC 0106889 8467.29.00 RIVETTING MACHINES Op. 01.01.2002 Dec. 02.01.2002 - TC 0106890 8467.29.00 ROUTERS, woodworking Op. 01.01.2002 Dec. 02.01.2002 - TC 0106891 8467.29.00 SANDERS/POLISHERS, ROTARY, DC operated ONLY Op. 01.01.2002 Dec. 02.01.2002 - TC 0106892 8467.29.00 SCREWDRIVERS, but NOT including EITHER of the following: (a) screwdrivers suitable for use as drills; (b) screwdrivers imported with EITHER of the following: (i) battery charging devices; (ii) power adaptors Op. 01.01.2002 Dec. 02.01.2002 - TC 0106894 8467.29.00 SCREWDRIVERS, DC operated ONLY Op. 01.01.2002 Dec. 02.01.2002 - TC 0106895 8467.29.00 SEAM LOCKERS Op. 01.01.2002 Dec. 07.01.2002 - TC 0106896 8467.29.00 SHEARS, grass, DC operated ONLY Op. 01.01.2002 Dec. 07.01.2002 - TC 0106897 8467.29.00 SHEARS, pruning, DC operated ONLY Op. 01.01.2002 Dec. 07.01.2002 - TC 0106898 8467.29.00 TOOLS, ROTARY, spindle speed 10 000 r/min or greater, chuck capacity NOT exceeding 5 mm Op. 01.01.2002 Dec. 08.01.2002 - TC 0106899 8467.29.00 TAPPING MACHINES, metal thread, but NOT including such goods imported with interchangeable tools Op. 01.01.2002 Dec. 08.01.2002 - TC 0106900 8467.29.00 BLENDERS, IMMERSION, portable, with or without attachments, having ALL of the following: (a) stainless steel immersion tube; (b) tube length NOT greater than 470 mm; (c) net operating weight (excluding attachments) NOT greater than 4 kg Op. 01.01.2002 Dec. 10.01.2002 - TC 0109361 8467.29.00 CUTTERS, JOINTING, GROOVE, having ALL of the following: (a) maximum blade diameter of 110 mm; (b) maximum cutting depth of 25 mm; (c) net operating weight NOT exceeding 3 kg Op. 01.01.2002 Dec. 10.01.2002 - TC 0109362



8467.29.00 KITS, POWER TOOL, comprising AT LEAST FOUR of the following: (a) drill; (b) screwdriver (DC only); (c) saw; (d) grinder; (e) nailer; (f) stapler; (g) planer; (h) polisher; (i) sander; (j) router; (k) metal cutting shears; (l) sanding pads; (m) laminate trimmer; (n) lamp AND/OR torch; (o) battery; (p) battery charger; (q) carry case Op. 01.01.2002 Dec. 10.01.2002 - TC 0109364 8467.29.00 TOOLS, ELECTRO MECHANICAL, hand held, capable of at least two of the following functions: (a) air blowing; (b) air vacuuming; (c) shredders but NOT including air blowers either incorporating or designed to incorporate a heating element Op. 01.01.2002 Dec. 02.01.2002 - TC 0109380 8467.29.00 NUTRUNNERS, having a DC electric motor Op. 15.08.2003 Dec. 24.10.2003 - TC 0310087 8467.81 CHAINSAWS, engine capacity greater than 67 cc, whether or not imported with guide bar, but NOT including guide bars when imported as initial spares or replacement parts. Op. 04.06.1993 Dec. 04.06.1993 - TC 9305593 8467.81.00 CHAINSAWS, whether or not imported with guide bar, but NOT including guide bars imported as initial spares or replacement parts Op. 24.08.1993 Dec. 18.03.1994 - TC 9307538 8467.81.00 CHAINSAWS, hydraulic powered, portable, hand operated, operating weight 3 kg to 12 kg inclusive, power output 3.7 kW to 12 kW inclusive Op. 22.09.1993 Dec. 27.01.1994 - TC 9310289 8467.91.00 PARTS, CHAINSAW AND POWERHEAD, excluding guide bars and electronic ignition modules Op. 29.07.1994 Dec. 31.01.1995 - TC 9406423 8467.99.10 PARTS, BLOWER, being ANY of the following: (a) covers; (b) blower tubes; (c) housings Op. 21.12.2006 Dec. 16.03.2007 - TC 0620043



8467.99.10 PARTS, BELT SANDER, being ANY of the following: (a) tension roller arms; (b) base plates; (c) dust collector brackets; (d) carbon brush holder caps; (e) dust collector covers; (f) handle covers; (g) belt covers; (h) safety covers; (i) gear covers; (j) frames, with or without ANY of the following: (i) rivets; (ii) dust guides; (iii) bearings; or (iv) sponge sheets; (k) cord guard; (l) motor housing, with or without ANY of the following: (i) brush holders; or (ii) screws; (m) baffle plates; (n) support pins; (o) tension rollers, with or without bearings; (p) driving rollers; (q) cable strain reliefs; (r) dust cover separators; (s) roller tension shoes; (t) edge sliders; or (u) tension roller shafts Op. 01.01.2002 Dec. 10.01.2002 - TC 0109381 8467.99.10 PARTS, CIRCULAR SAW, being ANY of the following: (a) bases, with or without ANY of the following: (i) bolts; (ii) wing nuts; (iii) washers; (b) bearing box; (c) bearing covers; (d) handle covers; (e) blade cases; (f) brush holder caps; (g) safety covers; (h) switch covers; (i) lead covers; (j) inner and outer flanges; (k) cord guard; (l) motor housing, with or without ANY of the following: (i) brush holders; or (ii) screws; (m) gear housing, with or without bearings; (n) spindle locks; (o) base levers, with or without screws; (p) baffle plates; (q) cable strain relief; (r) handle sets, being handle sides Op. 01.01.2002 Dec. 10.01.2002 - TC 0109390



8467.99.10 PARTS, DRILL, being ANY of the following: (a) gear change buttons; (b) gear housing covers, with or without ANY of the following: (i) rubber pins; (ii) bearings; or (iii) washers; (c) switch handle covers; (d) brush holder caps; (e) handle covers; (f) terminal caps; (g) dust covers; (h) rear covers; (i) relay covers; (j) hammer cams; (k) chuck caps; (l) switch covers; (m) bearing cases; (n) cord guard; (o) handle grips; (p) motor housing, with or without ANY of the following: (i) rubber pins; (ii) brush holders; or (iii) screws; (q) gear housing, with or without ANY of the following: (i) rubber pins; (ii) spring pins; or (iii) caws; (r) handles; (s) chuck key holders; (t) belt hooks; (u) carbon brush holders; (v) gear change knobs; (w) switch levers, with or without ANY of the following: (i) springs; or (ii) safety locks; (x) gear change levers; (y) battery set plates; (z) guide plates; (aa) cam plates; (ab) baffle plates; (ac) hammer control shifter pins; (ad) torque change pins; (ae) gear shift rods; (af) cable strain reliefs; (ag) gear shifters; (ah) gear change sliders Op. 01.01.2002 Dec. 10.01.2002 - TC 0109391 8467.99.10 PARTS, GRINDER, being ANY of the following: (a) base support bearing; (b) housing covers; (c) dust covers; (d) wheel covers; (e) carbon brush holder caps; (f) cord guards; (g) gear housing with or without O rings; (h) motor housing with or without ANY of the following: (i) brush holders; (ii) set screws; (iii) rubber pins; (i) carbon brush holders; (j) handle sets, being handle sides; (k) wheel cover holders; (l) switch lever;



(m) spindle lock pins; (n) baffle plates; (o) tool rests; or (p) cable strain reliefs Op. 01.01.2002 Dec. 10.01.2002 - TC 0109392 8467.99.10 PARTS, JIGSAW, being ANY of the following: (a) bases; (b) carbon brush holder caps; (c) gear covers; (d) gear housing cover with or without spring pin; (e) cranks; (f) bearing case with or without pins; (g) cord guard; (h) gear housing with or without ANY of the following: (i) bearings; (ii) spring pins; or (iii) rubber pins; (i) slider holders; (j) motor housing with or without ANY of the following: (i) brush holders; (ii) set screws; or (iii) rubber pins; (k) carbon brush holders; (l) control levers; (m) slider plates; (n) balance plates; (o) baffle plates; (p) dust plates; (q) clamp plates; (r) protectors; (s) blade control rollers, with or without ANY of the following: (i) pins; (ii) retainers; or (iii) stop rings; (t) blade control rods; (u) slider supports; (v) sliders; (w) cable strain reliefs; (x) handle sets, being handle sides; (y) blade sets, being blade holding clamps Op. 01.01.2002 Dec. 10.01.2002 - TC 0109400 8467.99.10 PARTS, ORBITAL SANDER, being ANY of the following: (a) carbon brush holders; (b) motor housing, with or without ANY of the following: (i) brush holders; (ii) rubber pins; (c) baffle plates; (d) foot; (e) paper clampers; (f) clamper levers; (g) bases with or without rubber pins; (h) cord guards; (i) strain relief cords; (j) terminal bases; (k) dust covers, with or without ANY of the following: (i) screws; or (ii) nuts; (l) dust fans, with or without ANY of the following: (i) nuts; or (ii) bolts; (m) retaining rings; (n) dust cover caps;



(o) switch covers; or (p) switch levers, with or without ANY of the following: (i) springs; (ii) safety locks; or (iii) stop rings Op. 01.01.2002 Dec. 10.01.2002 - TC 0109401 8467.99.10 PARTS, ROUTER, being ANY of the following: (a) router bases; (b) motor brackets; (c) brush holder caps; (d) chip covers; (e) bearing covers; (f) rear covers; (g) handle sets, being handle sides; (h) switch covers; (i) deflectors chip; (j) cord guards; (k) motor housing, with or without ANY of the following: (i) brush holders; (ii) screws; or (iii) rubber pins; (l) carbon brush holders; (m) control knobs; (n) lock levers; (o) baffle plates; (p) guide poles; (q) stopper poles; (r) base poles; (s) scale adjustment rings; (t) trimmer shoes; (u) handle covers; (v) stoppers, with or without ANY of the following: (i) bolts; (ii) nuts; or (iii) screws; (w) housing separators; (x) cable strain reliefs; or (y) under housings Op. 01.01.2002 Dec. 10.01.2002 - TC 0109402 8467.99.10 PARTS, NIBBLER OR SHEARS, being ANY of the following: (a) blade holders; (b) blocks; (c) brush holder caps; (d) bushes; (e) chip covers; (f) cord guards; (g) crank housings; (h) dice holders; (i) die holders; (j) dies; (k) drum housings; (l) dust covers; (m) front bases; (n) gear housing covers, with OR without bearings; (o) gear housings, with OR without bearings; (p) handle sides; (q) housing sides; (r) links; (s) metal housing supports; (t) motor housings, with OR without brush holder; (u) pins; (v) protectors;



(w) punch holders; (x) rams; (y) rings; (z) rods; (aa) safety locks; (ab) side plates; (ac) slip plates; (ad) spacers; (ae) stop rings; (af) stoppers; (ag) strain reliefs; (ah) switch covers; (ai) switch levers; (aj) switch rods; (ak) thickness gauges; (al) wrench holders; (am) yokes Op. 06.09.2002 Dec. 06.12.2002 - TC 0208237 8467.99.10 PARTS, IMPACT WRENCH, being ANY of the following: (a) motor housings; (b) anvils, with OR without ring spring; (c) bearing covers; (d) bearing housings; (e) brush holder cap covers; (f) bumpers; (g) clutch cams; (h) collars; (i) condenser covers; (j) control circuits; (k) cord guards; (l) extension bars; (m) grips; (n) grip bases; (o) hammers; (p) hammer cases, with OR without sleeve OR dust seal; (q) handle covers; (r) levers; (s) motor housings, with OR without brush holder OR screw; (t) pins; (u) plugs; (v) ratchet holders; (w) ratchet pawls; (x) rear covers; (y) rings; (z) side grip handles; (aa) sleeves; (ab) spindles; (ac) spring pawls; (ad) steel balls; (ae) strain reliefs; (af) sub housings; (ag) switch levers; (ah) triggers Op. 06.09.2002 Dec. 06.12.2002 - TC 0208238



8467.99.10 PARTS, SCREWDRIVER, being ANY of the following: (a) adjust sleeves; (b) anvils; (c) battery holders; (d) bearing boxes; (e) bearing retainers; (f) box covers; (g) brush holders; (h) bumpers; (i) cam plates; (j) caps; (k) casings; (l) casing sides; (m) change knobs; (n) change levers; (o) change plates; (p) change rings; (q) circuit boards; (r) clutch cams; (s) clutch covers, with OR without bearing OR felt; (t) shafts; (u) cord guards; (v) dials; (w) dust covers; (x) dust rings; (y) dust seal rings; (z) feeder boxes; (aa) felt covers; (ab) flinger; (ac) front caps; (ad) front covers; (ae) gear housings, with OR without bearing; (af) gear housing covers, with OR without bearing; (ag) guide plates; (ah) hammers; (ai) hammer cases; (aj) handle covers; (ak) handle sides; (al) heads; (am) holder arms; (an) holders; (ao) hooks; (ap) housings; (aq) internal gear cases; (ar) keys; (as) knobs; (at) levers; (au) locators; (av) lock rings; (aw) lock sleeves; (ax) magnetic holders; (ay) motor housings, with OR without bearing OR pins; (az) motor rear covers; (ba) pins; (bb) plates; (bc) racks; (bd) radiating plates; (be) ratchet arms; (bf) ratchet discs; (bg) ratchet wheels; (bh) receptacle sleeves; (bi) reset buttons; (bj) retainers; (bk) retaining rings;



(bl) rings; (bm) screw guides; (bn) set guides; (bo) shifter pins; (bp) sleeves; (bq) slide plates; (br) sliders; (bs) spacers; (bt) spindles; (bu) steel balls; (bv) stop rings; (bw) stoppers; (bx) stopper bases; (by) stopper guides; (bz) strain reliefs; (ca) switch levers; (cb) switch plates; (cc) torque adjust rings; (cd) tubes; (ce) u plates; (cf) wheels Op. 06.09.2002 Dec. 06.12.2002 - TC 0208239 8467.99.10 PARTS, HAMMER DRILL, being ANY of the following: (a) bearing cases; (b) cam housing covers; (c) cams; (d) carbon brush holders; (e) change buttons; (f) change levers; (g) change plates; (h) clamp pins; (i) cord guards; (j) cord clamps; (k) depth guages; (l) dust covers; (m) gear housing covers; (n) gear housings, with OR without cam OR pin; (o) gear switch buttons; (p) grip bases; (q) grips, with OR without nuts; (r) handle case covers; (s) handle cases; (t) handle covers; (u) handle sides; (v) inner housings; (w) levers; (x) motor housings, with OR without pin; (y) plates; (z) pins; (aa) rear sliders; (ab) rings; (ac) shifter rods; (ad) shifter rod retainers; (ae) slider plates; (af) spindles, with OR without cam, bearing, plate, steel ball OR pin; (ag) strain reliefs; (ah) stopper poles; (ai) switch covers; (aj) switch handle covers; (ak) v bases Op. 06.09.2002 Dec. 06.12.2002 - TC 0208248



8467.99.10 PARTS, CUTTER, being ANY of the following: (a) handle covers; (b) bases; (c) bearing boxes; (d) bearing retainers; (e) blade cases; (f) blade covers; (g) brush holder caps, with OR without brush holder; (h) clamps; (i) cord guards; (j) covers; (k) dust bags; (l) dust covers; (m) gear housings; (n) handle covers; (o) handle sides; (p) inner flanges; (q) joint threads; (r) keys; (s) lead covers; (t) levers, with OR without screw; (u) motor housings, with OR without brush holder brush cap, brush OR screw; (v) outer flanges; (w) pipes; (x) pipe holders; (y) plates; (z) rear covers; (aa) rings; (ab) rods; (ac) separators; (ad) side grip handles; (ae) sleeves; (af) strain reliefs; (ag) switch covers; (ah) water plugs; (ai) pipes, water supply Op. 06.09.2002 Dec. 06.12.2002 - TC 0208249 8467.99.10 PARTS, ROTARY OR DEMOLITION HAMMER, being ANY of the following: (a) barrel covers; (b) barrels; (c) bearing boxes; (d) bearing holders; (e) bearing retainers; (f) bell cranks; (g) cam shafts; (h) carbon brush holders; (i) brush holder covers; (j) brush holder caps; (k) caps; (l) cap covers; (m) casters; (n) change levers; (o) change pins; (p) change ring covers; (q) change rings; (r) change keys; (s) change links; (t) change plates; (u) change shafts; (v) chuck covers; (w) chuck rings; (x) clutch cams;



(y) collar sleeves; (z) connectors; (aa) connecting rods; (ab) controllers; (ac) controller covers; (ad) cord guards; (ae) crank caps; (af) cap covers; (ag) crank pins; (ah) crank housing caps; (ai) crank housing covers; (aj) crank housings, with OR without rings; (ak) crank joints; (al) cushion plates; (am) cushion rings; (an) cylinders, with OR without helicoil; (ao) cylinder liner assemblies, with OR without springs OR washers (ap) depth gauges; (aq) driving sleeves; (ar) dust cups; (as) dust collectors; (at) dust covers; (au) dust extractors; (av) dust guides; (aw) fix rods; (ax) front caps; (ay) gear covers; (az) gear housing covers, with OR without rings; (ba) gear housing packings; (bb) gear housings, with OR without bearings, washers, springs, pins OR rings; (bc) grip bases; (bd) grip clamps; (be) grip holders; (bf) grips; (bg) guide bases; (bh) guide sleeves; (bi) hammers; (bj) hammer catchers; (bk) handle covers; (bl) handle holders; (bm) handles; (bn) handle bases; (bo) handle shafts; (bp) handle sides; (bq) holder bands; (br) holders; (bs) holder cap plates; (bt) housing covers; (bu) housing sides; (bv) idlers; (bw) impact bolts; (bx) impact bolt guides; (by) impact bolt holders; (bz) inner housings; (ca) keys; (cb) latches; (cc) lead guides; (cd) lock buttons; (ce) lock plates; (cf) motor housing covers; (cg) motor housing packings; (ch) motor housings, with OR without brush holders, set screws, pins OR rings;



(ci) oil tank covers; (cj) oil tank packings; (ck) oil cups; (cl) packings; (cm) pins; (cn) pipes; (co) piston joints; (cp) pin holders; (cq) piston rings; (cr) pistons; (cs) piston cylinders; (ct) plates; (cu) plungers; (cv) push cones; (cw) radiating plates; (cx) rear covers; (cy) rear cases; (cz) ring holders; (da) rings; (db) rods; (dc) rollers; (dd) roller guides; (de) seal holders; (df) seal cases; (dg) set plates; (dh) shift knobs; (di) side handles; (dj) side grip bases; (dk) side grip handles; (dl) side plate bases; (dm) side handle plates; (dn) sleeves; (do) sleeve guides; (dp) slide handle bases; (dq) slide plates; (dr) shoulder pins; (ds) snap pins; (dt) spacers; (du) steel balls; (dv) steel ball guides; (dw) spring guides; (dx) strikers; (dy) stoppers; (dz) stopper poles; (ea) strain reliefs; (eb) supporters; (ec) switch levers; (ed) switch boxes; (ee) tool holder covers; (ef) tool retainers; (eg) tool retainer poles; (eh) tool retainer shafts; (ei) torque limiters Op. 06.09.2002 Dec. 06.12.2002 - TC 0208251



8467.99.10 PARTS, ELECTRIC CHAINSAW, being ANY of the following: (a) adjust pins; (b) bar covers; (c) brake levers; (d) brush holder caps; (e) caps; (f) cases, clutch side; (g) cases, engine side; (h) casings; (i) chain catchers; (j) chain covers; (k) cord guards; (l) bars; (m) front grips; (n) front hand guards; (o) gear housings; (p) gear housing covers; (q) grips; (r) grip holders; (s) grip holder covers; (t) guide bars; (u) guide bar cases; (v) guide bar retainers; (w) handle covers; (x) housing sides; (y) lock off buttons; (z) main housings; (aa) main housing covers; (ab) motor housings, with OR without brush holder OR screw; (ac) motor housing covers; (ad) nozzles; (ae) oil buttons; (af) oil vessels; (ag) pins; (ah) pin pressers; (ai) pipes; (aj) pistons; (ak) plungers; (al) protective covers; (am) protectors; (an) protector holders; (ao) pruning extensions; (ap) relay covers; (aq) rings; (ar) side grips; (as) spindles; (at) sprocket covers; (au) sprocket nose bars; (av) stoppers; (aw) strain reliefs; (ax) switch levers; (ay) tank plugs; (az) terminal bases; (ba) tubes; (bb) tubular grips Op. 06.09.2002 Dec. 06.12.2002 - TC 0208253



8467.99.10 PARTS, PLANER, being ANY of the following: (a) adjust plates; (b) arrow plates; (c) bases; (d) bearing covers; (e) bearing retainers; (f) bellows; (g) belt covers; (h) blade holders; (i) brackets; (j) brush holder caps; (k) cam plates; (l) carbon brush holders; (m) chip covers; (n) clamp sets, reversible blade; (o) cord guards; (p) covers; (q) cover shafts; (r) cutter levellers; (s) depth guides; (t) drums, with OR without bearings, adjust plate, screw, drum plate OR bolt; (u) drum covers; (v) drum holders; (w) drum housings, with OR without pin; (x) drum plates; (y) drum rear shafts; (z) edge fences; (aa) front bases; (ab) guide holders; (ac) guide rules; (ad) handle covers; (ae) handle sides; (af) holders; (ag) knobs; (ah) lead guides; (ai) lock off buttons; (aj) main frames, with OR without brush holder OR screw OR rivet; (ak) motor holders; (al) motor housings, with OR without brush holder OR screw; (am) nozzles; (an) pins; (ao) pressure plates; (ap) rear bases; (aq) rear covers; (ar) rings; (as) rolls; (at) scale plates; (au) shoulder rings; (av) strain reliefs; (aw) switch levers; Op. 06.09.2002 Dec. 06.12.2002 - TC 0208255 8468.20 TORCHES, hand held, self-contained, pinpoint flame temperature 2 760 degrees C or greater Op. 15.01.1985 Dec. 15.01.1985 - TC 8433930 8468.20.90 BRAZERS, ALUMINIUM AIR CONDITIONERS, comprising BOTH of the following: (a) dual mass flow controllers; (b) NOT less than three flame settings Op. 30.01.2006 Dec. 18.04.2006 - TC 0603060



8468.80.00 WELDERS, LINEAR VIBRATION Op. 31.05.2005 Dec. 07.10.2005 - TC 0506655 8468.90.00 PARTS, CUTTERS, being rails Op. 09.04.2009 Dec. 03.07.2009 - TC 0912125 8468.90.00 PARTS, WELDERS, being ANY of the following: (a) nozzles; (b) tips; (c) contacts; (d) guns; (e) torches; (f) electrodes; (g) housings; (h) insulators; (i) adapters; (j) drive rolls; (k) fasteners; (l) guides; (m) knobs; (n) mountings; (o) pins; (p) plugs; (q) retaining cups; (r) shields; (s) spacers; (t) liners; (u) triggers; (v) collet bodies; (w) diffusers; (x) body tubes; (y) strain reliefs; (z) collets; (aa) rotors; (ab) stators; (ac) stabilisers; (ad) printed circuit boards; (ae) arrestors; (af) lugs; (ag) heads Op. 15.03.2006 Dec. 26.05.2006 - TC 0605441 8472.90 STAPLING MACHINES, paper, but NOT including staplers which accept ready-made rectangular section wire staples, having BOTH of the following dimensions: (a) staple wire widths 0.45 mm (No. 26) OR 0.56 mm (No. 24); (b) staple leg length 6 mm Op. 13.05.1985 Dec. 13.05.1985 - TC 8531696 8472.90 STAPLING MACHINES, electric Op. 03.07.1985 Dec. 03.07.1985 - TC 8533542 8472.90.10 STAPLING MACHINES, PAPER Op. 22.12.2009 Dec. 12.03.2010 - TC 0949993 8472.90.10 STAPLING MACHINES, paper, having ALL of the following: (a) capacity to accept ready made strips of 26/6 wire staples; (b) staple capacity in the range from 75 staples to 210 staples (both inclusive); (c) stapling depth in the range from 55 mm to 400 mm Op. 21.07.1993 Dec. 05.11.1993 - TC 9307078



8474.10.00 PLANT, DENSE MEDIA SEPARATION, comprising BOTH of the following: (a) drum plant, comprising ALL of the following: (i) circulating medium tank; (ii) feed bin; (iii) sinks launder; (iv) drain and rinse screen, (b) cyclone plant, comprising ALL of the following: (i) circulating medium tank; (ii) mixing box; (iii) feed bin; (iv) drain and rinse screen Op. 09.06.2005 Dec. 21.10.2005 - TC 0507061 8474.10.00 BENEFICIATION PLANT, comprising ALL of the following: (a) crushers; (b) stackers and/or reclaimers; (c) drum scrubbers; (d) vibrating screens; (e) hoppers; (f) cyclones; (g) attritioners; (h) agitators; (i) screw classifiers; (j) flocculant mixers; (k) tanks and/or rakes; (l) feed samplers; (m) pumps; (n) conveyors; (o) cranes and/or hoists; (p) plant controllers; (q) actuators and gages Op. 27.06.2005 Dec. 23.09.2005 - TC 0508309 8474.10.00 PLANT, COAL, HANDLING AND PREPARATION, comprising ALL of the following: (a) filters; (b) centrifuges; (c) pumps; (d) gearboxes; (e) conveyors; (f) pulleys; (g) cranes; (h) drives; (i) cyclones but NOT including plants when imported with rollerscreens or crushers Op. 04.08.2005 Dec. 23.01.2006 - TC 0510272 8474.10.00 COUNTER CURRENT DECANTATION AND/OR NEUTRALISATION PLANT, comprising ALL of the following: (a) tanks; (b) rakes; (c) agitators; (d) pumps; (e) heaters; (f) air receivers; (g) blowers; (h) valves; (i) screw feeders; (j) dust collectors; (k) vibrators; (l) vent scrubbers; (m) hoppers; (n) cranes and/or hoists;



(o) plant controllers consisting of ALL of the following: (i) relays; (ii) switches; (iii) levers; (iv) motor starters, (p) cables; (q) battery chargers; (r) actuators; (s) nucleonic density meters; (t) ultrasonic and/or guided radar level gauges; (u) pressure and/or temperature probes; (v) harmonic filters Op. 11.08.2005 Dec. 04.11.2005 - TC 0510586 8474.10.00 FERRO-SILT WASHERS, comprising ALL of the following: (a) deep cone thickeners; (b) insulation panels; (c) support pads Op. 19.10.2005 Dec. 13.02.2006 - TC 0514732 8474.10.00 PLANT, COAL, HANDLING AND PREPARATION, plc, comprising ALL of the following: (a) screens; (b) centrifuges; (c) pumps; (d) gearboxes; (e) conveyors; (f) cranes; (g) drives; (h) crushers; (i) cyclones; (j) separators; (k) bins and/or hoppers; (l) skyline stackers; (m) spirals Op. 21.10.2005 Dec. 16.02.2006 - TC 0514785 8474.10.00 PLANT, MANUFACTURING, SUPERPHOSPHATE, comprising ALL of the following: (a) baghouses; (b) rock feeders; (c) rock bins; (d) weighers; (e) mixers; (f) mills; (g) scrubbers; (h) cutters; (i) screens; (j) elevators Op. 16.11.2005 Dec. 03.04.2006 - TC 0516041 8474.10.00 PROCESS LINE, GRINDING AND BENEFICIATION, CRUSHED ORE, comprising ALL of the following: (a) storage and/or discharge tanks; (b) feed conveyors and/or slurry pipes; (c) grinding mills; (d) cyclones and/or classifiers; (e) flotation cells; (f) pumps; (g) filters; (h) process chemical mixers and/or tanks and/or bins; (i) plant controllers Op. 17.01.2006 Dec. 18.04.2006 - TC 0602384



8474.10.00 MILLS, ZINC, comprising ALL of the following: (a) floatation tanks; (b) handlers; (c) crushers; (d) electrical transmitters; (e) water pumps; (f) effluent treaters Op. 08.02.2006 Dec. 24.07.2006 - TC 0603534 8474.10.00 PLANT, FLOTATION, LEAD, comprising ALL of the following: (a) cleaners; (b) flotation cells; (c) diverters; (d) valves; (e) flotation vessels; (f) pumps; (g) chutes; (h) samplers Op. 08.02.2006 Dec. 21.04.2006 - TC 0603536 8474.10.00 PLANT, FLOTATION, ZINC, comprising ALL of the following: (a) cleaners; (b) flotation cells; (c) motors; (d) valves; (e) flotation vessels; (f) pumps; (g) chutes; (h) agitators; (i) tanks; (j) samplers Op. 08.02.2006 Dec. 21.04.2006 - TC 0603538 8474.10.00 PLANT, SIZING HANDLER, SINTER, comprising ALL of the following: (a) tipplers; (b) conveyors; (c) feeders; (d) storage bins; (e) drafters; (f) mixing tables; (g) conditioning drums; (h) sizing rolls; (i) crushing rolls; (j) sinter breakers; (k) scrubbers Op. 08.02.2006 Dec. 05.05.2006 - TC 0603544 8474.10.00 SCREENS, VIBRATORY Op. 11.04.2006 Dec. 07.07.2006 - TC 0606864 8474.10.00 SCREENERS, VIBRATORY, comprising BOTH of the following: (a) track mounted; (b) two bearing screenbox Op. 17.07.2006 Dec. 29.09.2006 - TC 0611944 8474.10.00 SCREENERS, comprising the following: (a) hoppers and grids; (b) vibratory screens; (c) conveyors; (d) engines and/or motors; (e) pumps; (f) tanks; (g) wheels or tracks Op. 14.09.2006 Dec. 08.12.2006 - TC 0617234



8474.10.00 SKIMMERS, HOT SLAG METAL Op. 31.10.2006 Dec. 12.01.2007 - TC 0618025 8474.10.00 PLANT, BENEFICIATION, comprising ALL of the following: (a) cone crushers; (b) stackers; (c) screens; (d) hoppers; (e) cyclones; (f) flocculent mixers; (g) tanks; (h) feeders; (i) bins; (j) pumps; (k) conveyors; (l) cranes; (m) plant controllers; (n) actuators and gauges Op. 17.11.2006 Dec. 09.02.2007 - TC 0618629 8474.10.00 LINES, GOLD RECOVERY, HEAP LEACH EXTRACTION, comprising ALL of the following: (a) grinding roll crushers; (b) agglomeration drums; (c) conveyors; (d) pipes Op. 23.11.2006 Dec. 02.03.2007 - TC 0618762 8474.10.00 PLANT, COPPER PROCESSING, comprising ALL the following: (a) centrifuges; (b) tanks; (c) filters; (d) conveyors; (e) transformers; (f) rectiformers; (g) pumps; (h) agitators; (i) blowers; (j) settlers; (k) powerlines; (l) substations; (m) packers; (n) strippers; (o) cathodes; (p) exchangers; (q) controllers Op. 13.02.2007 Dec. 11.05.2007 - TC 0702059 8474.10.00 PLANT, DESANDING, comprising ALL of the following: (a) screens; (b) feeders; (c) pumps; (d) cyclones; (e) conveyors; (f) tanks and / or rakes Op. 11.04.2007 Dec. 29.06.2007 - TC 0705329



8474.10.00 PLANT, WASHING, SAPPHIRES AND/OR TIN AND/OR GOLD, comprising ALL of the following: (a) hopper feeders; (b) trommels; (c) deslimers; (d) vibrating screen deck fine separators; (e) sapphire and/or gold and/or tin recoverers; (f) slurry handlers; (g) sapphire and/or gold cleaners; (h) generators Op. 21.08.2007 Dec. 29.10.2007 - TC 0713236 8474.10.00 FEEDERS, STRAND, SINTER FURNACE PALLET CAR Op. 02.05.2008 Dec. 18.07.2008 - TC 0806361 8474.10.00 PLANT, WET CONCENTRATOR, comprising ALL of the following: (a) gravity separation fibreglass spirals; (b) cyclones; (c) pumps; (d) hoppers; (e) launders; (f) pipes; (g) separators Op. 19.05.2008 Dec. 08.08.2008 - TC 0808856 8474.10.00 PLANT, CONCENTRATOR, comprising ALL of the following: (a) spirals; (b) reverse osmosis module; (c) thickeners; (d) transformer; (e) network and control system module; (f) flocculent module; (g) pumps; (h) pipes; (i) conveyors; (j) separators; (k) screens; (l) valves; (m) cyclones; (n) stackers; (o) tanks; (p) bins; (q) trommels; (r) cooling heat exchanger; (s) classifiers; (t) samplers; (u) analysers; (v) distributors; (w) launders; (x) compressors Op. 20.05.2008 Dec. 18.08.2008 - TC 0808969 8474.10.00 PLANT, MINERAL SEPARATION, comprising ALL of the following: (a) separators; (b) scrubbers; (c) re-heaters; (d) filters; (e) conductor magnetic bins; (f) elevators; (g) pumps; (h) pipelines; (i) conveyors; (j) screens;



(k) valves Op. 20.05.2008 Dec. 18.08.2008 - TC 0808970 8474.10.00 PLANT, MINERAL SANDS MINING, comprising ALL of the following: (a) hopper and apron feeder; (b) scrubber; (c) trommel; (d) tracks; (e) transformer; (f) network and control module; (g) pumps; (h) pipelines; (i) conveyors; (j) valves Op. 20.05.2008 Dec. 08.08.2008 - TC 0808971 8474.10.00 PLANT, PRE-CONCENTRATOR, comprising ALL of the following: (a) spirals; (b) thickeners; (c) transformer; (d) network and control system module; (e) flocculent module; (f) pumps; (g) pipelines; (h) conveyors; (i) screens; (j) valves; (k) cyclones; (l) tanks; (m) compressors; (n) samplers; (o) analysers; (p) launders Op. 20.05.2008 Dec. 18.08.2008 - TC 0808973 8474.10.00 PLANT, WET CONCENTRATOR, comprising ALL of the following: (a) spirals; (b) separators; (c) reverse osmosis module; (d) transformer; (e) network and control module; (f) pumps; (g) pipes; (h) conveyors; (i) screens; (j) valves; (k) cyclones; (l) stackers; (m) tanks; (n) bins; (o) trommels; (p) cooling heat exchanger; (q) classifiers; (r) samplers; (s) analysers; (t) distributors; (u) launders; (v) compressors Op. 20.05.2008 Dec. 18.08.2008 - TC 0808975



8474.10.00 PLANT, CLEANER AND CONCENTRATE FILTRATION, COPPER-MOLYBDENUM, comprising ALL of the following: (a) cleaners; (b) stilling boxes; (c) cleaning flotation cells; (d) tanks; (e) thickeners; (f) air compressors; (g) air receivers; (h) agitators; (i) blowers; (j) cyclones; (k) deaerators; (l) roughers; (m) scavengers; (n) hoppers; (o) screens; (p) samplers; (q) mixers; (r) pumps; (s) screw feeders; (t) mills; (u) hoists; (v) electrical instrumentation modules and controllers; (w) structural steel segments and supports; (x) pipes and/or pipe fittings Op. 06.06.2008 Dec. 15.08.2008 - TC 0811643 8474.10.00 PLANT, ROUGHER SCAVENGER FLOTATION, MOLYBDENUM AND COPPER, comprising ALL of the following: (a) stilling boxes; (b) tanks; (c) flotation cells; (d) pumps; (e) agitators; (f) analysers; (g) cranes; (h) hoppers; (i) electrical instrumentation modules and controllers; (j) pipes and/or pipe fittings Op. 06.06.2008 Dec. 15.08.2008 - TC 0811644 8474.10.00 SEPARATION PLANT, DENSE MEDIA, CYCLONE, comprising ALL of the following: (a) mixing box; (b) cyclones; (c) underflow box; (d) distribution box; (e) densifiers and splitters; (f) concentrates drain, rinse screen and discharge chutes; (g) floats drain, rinse screen, underpan and chute; (h) magnetic separator and effluent box; (i) overdense chute; (j) demagnetising coil; (k) spillage recovery system; (l) pumps; (m) tanks Op. 30.07.2008 Dec. 24.10.2008 - TC 0823710



8474.10.00 SEPARATION PLANT, SPIRAL, comprising ALL of the following: (a) desliming cyclone and overflow and spigot box; (b) primary spirals; (c) rougher and re-cleaner spirals bank; (d) magnetic separator and underpan; (e) cleaners and scavenger spiral bank; (f) water distribution box; (g) tails dewatering cyclone; (h) screen feed box; (i) tails dewatering screen, underpan and discharge chute; (j) spillage system; (k) pumps; (l) tanks Op. 30.07.2008 Dec. 24.10.2008 - TC 0823747 8474.10.00 SEPARATORS, DUST, portable, comprising BOTH of the following: (a) filters; (b) cyclones Op. 14.08.2008 Dec. 07.11.2008 - TC 0826500 8474.10.00 SHAKERS, test seive, laboratory, having a horizontal circular motion and tapping action Op. 06.01.1995 Dec. 05.05.1995 - TC 9500688 8474.10.00 VIBRATORY SCREENS, comprising ALL of the following: (a) carbon steel screen frame; (b) rubber dust covers; (c) carbon steel feed box; (d) stainless steel woven wire cloth Op. 02.11.1998 Dec. 08.01.1999 - TC 9809717 8474.10.00 WASHER AND CLASSIFIER AND DEHYDRATOR, SAND AND GRAVEL Op. 01.09.2000 Dec. 10.11.2000 - TC 0007583 8474.10.00 BACKFILL SCREENER AND PADDER Op. 09.05.2003 Dec. 25.07.2003 - TC 0305541 8474.20.00 HYDRAULIC ROCK BREAKERS, percussion impact, comprising ALL of the following: (a) stationary boom system comprising ALL of the following: (i) base frame and slewing superstructure having a slewing angle of NOT less than 175 degrees; (ii) boom length NOT less than 8 m; (iii) arm length NOT less than 7 m; (iv) hydraulic hammer adaptor, (b) hydraulic distributor; (c) hydraulic power unit with electric motor having an output NOT less than 70 kW; (d) hydraulic hammer with working tool Op. 09.06.2009 Dec. 12.11.2009 - TC 0919304 8474.20.00 TITANIUM DIOXIDE FINISHING PLANT, comprising ALL of the following: (a) tanks; (b) agitators; (c) pumps; (d) fans; (e) palletisers; (f) sand mills; (g) screens; (h) feed pots; (i) separators; (j) filters; (k) repulpers;



(l) spray dryers; (m) conveyors; (n) bins; (o) dust collectors; (p) micronisers; (q) feed hoppers; (r) cyclones; (s) valves; (t) vibrators; (u) scrubbers; (v) blowers; (w) coolers Op. 22.04.2009 Dec. 10.07.2009 - TC 0913316 8474.20.00 CRUSHERS, GYRATORY, mobile Op. 20.05.2005 Dec. 21.10.2005 - TC 0505969 8474.20.00 ORE CRUSHING PLANT, comprising ALL of the following: (a) apron feeders; (b) vibrating screens; (c) jaw crushers; (d) conveyors; (e) bins and/or chutes; (f) rock breakers; (g) tramp metal magnets and/or detectors; (h) air compressors and receivers; (i) plant controllers consisting of ALL of the following: (i) relays; (ii) switches; (iii) levers; (iv) motor starters, (j) actuators and/or gauges Op. 11.08.2005 Dec. 04.11.2005 - TC 0510585 8474.20.00 LIMESTONE CRUSHING AND HANDLING PLANT, comprising ALL of the following: (a) jaw crushers; (b) cone crushers; (c) hoppers; (d) tanks; (e) scrubbers; (f) chutes; (g) apron feeders; (h) vibrating screens; (i) cyclones; (j) weightometers; (k) tramp metal magnets; (l) metal detectors; (m) limestone mills; (n) pumps; (o) agitators; (p) conveyors; (q) Plant controllers, consisting of ALL of the following: i) relays; ii) switches; iii)levers; iv) motor starters, (r) power transformers; (s) cables; (t) variable speed drives; (u) battery chargers Op. 19.08.2005 Dec. 11.11.2005 - TC 0511034



8474.20.00 PRESSES, GRINDING ROLL, having ALL of the following: (a) roll diameter NOT less than 1.5 metres; (b) roller presser force NOT less than 2.4 newtons per square millimetre and NOT greater than 4.5 newtons per square millimetre; (c) throughput grinding rate NOT less than 700 tonnes per hour Op. 04.11.2005 Dec. 21.04.2006 - TC 0515341 8474.20.00 PROCESSING LINE, ORE CRUSHING, comprising ALL of the following: (a) jaw and/or gyratory crushers; (b) feeders and/or screens; (c) conveyors; (d) bins and/or chutes; (e) tramp metal magnets and/or detectors Op. 17.01.2006 Dec. 24.07.2006 - TC 0602383 8474.20.00 MILLS, BALL, comprising ALL of the following: (a) conveyors; (b) feeders; (c) chutes; (d) filters; (e) cooling fans; (f) heaters; (g) launders; (h) motors; (i) pumps; (j) tanks; (k) valves Op. 08.02.2006 Dec. 18.04.2006 - TC 0603535 8474.20.00 MILLS, SAG, comprising ALL of the following: (a) coolers; (b) fans; (c) conveyors; (d) converter; (e) feeder; (f) pulleys; (g) chutes; (h) heaters; (i) filters; (j) pumps; (k) gauges; (l) switches; (m) tanks Op. 08.02.2006 Dec. 18.04.2006 - TC 0603537 8474.20.00 PLANT, CRUSHING AND CONVEYING, IN-PIT, mobile, comprising ALL of the following: (a) crushers; (b) hoppers; (c) conveyors; (d) crawler mounted trippers; (e) crawler mounted spreaders; (f) crawlers; (g) generators Op. 15.05.2006 Dec. 20.10.2006 - TC 0606807 8474.20.00 PRESSES, ROLLER, GRINDING, having BOTH of the following: (a) pressing force of NOT greater than 2 000 kN/m2; (b) throughput of NOT greater than 35 mt/h Op. 11.04.2006 Dec. 21.07.2006 - TC 0606832 8474.20.00 MILLS, GRINDING Op. 11.04.2006 Dec. 07.07.2006 - TC 0606954



8474.20.00 PLANT, CRUSHING AND SCREENING, comprising ALL of the following: (a) crushers; (b) radial stackers; (c) gear units; (d) conveyor drive assemblies; (e) screens; (f) apron feeders; (j) vibratory feeders Op. 11.05.2006 Dec. 20.10.2006 - TC 0608183 8474.20.00 CRUSHERS, CONE Op. 10.05.2006 Dec. 30.10.2006 - TC 0608232 8474.20.00 MILLS, CEMENT, having ALL of the following: (a) feeders; (b) conveyors; (c) ball mills; (d) motors; (e) chutes; (f) vents; (g) dust collectors; (h) cyclones; (i) air slides; (j) coolers; (k) valves; (l) dryers; (m) power supplies; (n) controllers; (o) pumps Op. 25.05.2006 Dec. 11.08.2006 - TC 0609084 8474.20.00 CRUSHERS, ORE, comprising ALL of the following: (a) jaw crushers; (b) hydraulic setting adjusters; (c) flywheels and flywheel guards; (d) feed chutes; (e) integral motor supports; (f) grease lubricators; (g) electric motors Op. 01.06.2006 Dec. 09.11.2006 - TC 0609671 8474.20.00 PRESSES, GRINDING ROLL Op. 19.06.2006 Dec. 08.09.2006 - TC 0610571 8474.20.00 CRUSHERS, ROLL, comprising smooth or corrugated rolls having a diameter NOT greater than 300mm AND a length NOT greater than greater than 100mm Op. 18.09.2006 Dec. 15.12.2006 - TC 0617297 8474.20.00 GRANULATORS, ASPHALT Op. 25.10.2006 Dec. 12.01.2007 - TC 0617946 8474.20.00 PLANT, CRUSHING, comprising ALL the following: (a) crushers; (b) tanks; (c) agglomerators; (d) pumps; (e) pipes; (f) hoppers; (g) conveyors; (h) screens; (i) powerlines; (j) rock breakers; (k) rom bins;



(l) tramp iron magnets; (m) controllers Op. 13.02.2007 Dec. 03.08.2007 - TC 0702241 8474.20.00 CEMENT GRINDING PLANT, comprising ALL of the following: (a) ball mills; (b) injectors; (c) cyclones; (d) fans; (e) filters; (f) elevators; (g) drives; (h) coolers; (i) controllers Op. 30.01.2008 Dec. 04.04.2008 - TC 0801685 8474.20.00 MILLS, CEMENT, having ALL of the following: (a) ball mills; (b) bucket elevators; (c) classifiers; (d) compressors; (e) conveyors; (f) cooling towers; (g) cranes; (h) flowgates; (i) weighfeeders; (j) dust collectors; (k) extractor screws; (l) fans; (m) feeders; (n) filters; (o) gearboxes; (p) switchgears; (q) motors; (r) controllers; (s) pumps; (t) silos; (u) tanks; (v) transformers; (w) hoppers; (x) weighers; (y) winches; (z) blowers; (aa) separators Op. 08.04.2008 Dec. 04.07.2008 - TC 0802723 8474.20.00 PRESSES, ROLLER, hydraulic pneumatic, pressing force NOT less than 6 600 kN, having ANY of the following: (a) welding lined rollers with autogenous wear surface; (b) roll diameter NOT less than 1 400 mm; (c) roll width NOT less than 1 100 mm; (d) planetary gear drives, shaft mounted; (e) static V separator Op. 07.01.2003 Dec. 04.04.2003 - TC 0300367 8474.20.00 VERTICAL SPINDLE ROLLER MILLS, comprising ALL of the following: (a) three flap gate lock; (b) grinding bowl and grinding plates; (c) grinding rollers; (d) bevel and planetary mill drive gearbox; (e) nozzle ring; (f) hydraulic cylinders; (g) classifier; (h) hydraulics;



(i) vibration trough conveyor; (j) chain bucket elevator; (k) magnetic separator; (l) sealing air fan Op. 25.09.2003 Dec. 19.12.2003 - TC 0312260 8474.20.00 MILLS, ATTRITION GRINDING, vertical, stirred media, having ALL of the following: (a) overhung double helix charge agitator; (b) magnetic lining; (c) AC motor Op. 31.08.2004 Dec. 15.11.2004 - TC 0408893 8474.20.00 PULVERISERS, BOILER, coal fired, base capacity greater than 95 tonnes per hour Op. 10.01.2005 Dec. 18.03.2005 - TC 0500221 8474.20.00 CRUSHERS, CONCRETE Op. 25.01.2005 Dec. 03.06.2005 - TC 0501211 8474.31.00 GLASS FIBRE REINFORCED CEMENT MIXING PLANT, having ALL of the following: (a) material holding hopper; (b) agitator; (c) batch weight controller; (d) speed adjustable rotary dispenser; (e) variable speed mixer, having a maximum speed NOT less than 1 400 r/min; (f) pneumatic discharger; (g) volumetric dispenser; (h) pumping dispenser Op. 18.11.2009 Dec. 05.02.2010 - TC 0943499 8474.31.00 MIXERS, CEMENT, having ALL of the following: (a) wet volume NOT greater than 30 litres; (b) motor NOT greater than 250 V; (c) weight NOT greater than 26 kg Op. 28.05.2007 Dec. 10.08.2007 - TC 0708774 8474.31.00 MIXERS, CEMENT, having ALL of the following: (a) wet volume NOT greater than 60 litres; (b) motor NOT greater than 450 W; (c) Weight NOT greater than 64 kg Op. 28.05.2007 Dec. 04.10.2007 - TC 0715811 8474.31.00 CEMENTER, skid mounted, having ALL of the following; (a) silos; (b) NOT less than two triplex pumps; (c) mixing capacity NOT less than 2,500 kilograms per minute; (d) densitomers; (e) diesel engines Op. 28.09.2007 Dec. 14.12.2007 - TC 0716474 8474.31.00 CEMENTERS, having ALL of the following: (a) hydraulic pumps; (b) mixing tub capacity NOT less than 7.5 barrels; (c) displacement tub capacity NOT less than 19 barrels; (d) electronic controls; (e) mixing capacity NOT greater than 18 barrels per minute; (f) axial flow meters; (g) twin triplex positive displacement pumps with a maximum working pressure NOT less than 14 800 psi and NOT greater than 15 500 psi



Note: For the purposes of this TCO, 1 barrel is a US barrel of between 5 and 6 cu ft capacity of cement slurry Op. 03.01.2008 Dec. 28.03.2008 - TC 0800156 8474.31.00 GROUT MIXING PLANT, comprising ALL of the following: (a) batch processors; (b) hoppers and/or conveyors; (c) mixers; (d) controllers; (e) pipes and/or fittings; (f) pumps; (g) moulds; (h) dowels; (i) fixing equipment; (j) gaskets; (k) sockets; (l) shotcrete machines; (m) air compressors; (n) valves Op. 11.01.2008 Dec. 04.04.2008 - TC 0800663 8474.31.00 CONCRETE MIXING PLANT, programmable logic controlled, comprising ALL of the following: (a) planetary mixers; (b) kibble conveyors; (c) cement weighers; (d) water weighers; (e) aggregate weighers; (f) skip hoist buckets Op. 15.02.2008 Dec. 18.04.2008 - TC 0802703 8474.31.00 PLANT, GROUT MIXING, comprising ALL of the following: (a) automatic mixing unit comprising: (i) mixer; (ii) agitator; (iii) air compressor; (iv) stabiliser pump; (v) water pump; (vi) water tank; (vii) stabiliser tank; (viii) accelerator tank; (ix) control panel, programmable logic controlled being integrated and operated by tunnel boring machine; (x) mixer, agitator and tank level sensors (b) cement silo comprising: (i) horizontal silo with twin screw conveyor feed; (ii) reverse pulse dust filters; (iii) vibrators; (iv) level detection device (c) bentonite silo comprising: (i) bag splitter; (ii) screw conveyor (d) transfer system comprising: (i) transfer pumps; (ii) pressure gauges with switch; (iii) cleanup ball charge device (e) tunnel boring machine grouting equipment comprising: (i) injection pumps; (ii) pressure gauges with switch; (iii) transfer pumps; (iv) pressure sensors, programmable logic controlled, being integrated and operated by tunnel boring machine;



(v) flowmeters, programmable logic controlled being integrated and operated by tunnel boring machine; (vi) cleanup ball catcher; (vii) mixing nozzle; (viii) touch screen control panel; (ix) on/off grouting control; (x) electrical AND/OR communication cables (f) foam grout generator unit comprising: (i) air flow meter; (ii) foam generator; (iii) foam flow meter; (iv) grout AND/OR foam mixing nozzle; (v) operation panel, programmable logic controlled being integrated and operated by tunnel boring machine Op. 21.02.2008 Dec. 16.05.2008 - TC 0802908 8474.31.00 CEMENTERS, skid mounted, having ALL of the following: (a) triplex pumps; (b) diesel engines; (c) mixing capacity 2 200 litres per minute; (d) automatic cement mixing system Op. 12.05.2008 Dec. 04.08.2008 - TC 0807600 8474.31.00 PLANT, BATCHING AND MIXING, CONCRETE, transportable, programmable logic controlled, having ALL of the following: (a) concrete output NOT less than 70 cubic metres per hour; (b) hoppers; (c) mixers; (d) conveyors; (e) tanks; (f) agitators Op. 28.05.2008 Dec. 15.08.2008 - TC 0810322 8474.32.00 ASPHALT MIXING PLANT, mobile, programmable logic controlled, comprising ALL of the following: (a) 2 X trailers; (b) cold aggregate feeder; (c) collector belt; (d) dryer unit; (e) burner; (f) bag filter system; (g) exhaust fan; (h) diesel oil tank; (i) air compressor; (j) hot aggregate bucket elevator; (k) inclined screw conveyor; (l) filler surge hopper; (m) horizontal screw conveyor; (n) vibrating screens; (o) aggregates and filler weighing system ; (p) skip track with mechanical winch; (q) mixer unit; (r) control cabin; (s) thermal oil heater; (t) bitumen tank; (u) bitumen weighing system Op. 08.01.2009 Dec. 03.04.2009 - TC 0946613



8474.32.00 ASPHALT PRODUCTION PLANT, plc, having ALL of the following: (a) recycled asphalt processing up to 35%; (b) pugmill asphalt mixing NOT greater than 90 cycles per hour; (c) robotic assembly Op. 02.11.2005 Dec. 30.01.2006 - TC 0515323 8474.32.00 PLANT, ASPHALT, comprising the following; (a) bins; (b) mixers; (c) screeners; (d) bag houses; (e) inflate boxes; (f) dryer drums; (g) frames and/or railings and/or steel plates; (h) ladders; (i) tanks; (j) elevators; (k) flues and/or chimneys; (l) feeders; (m) conveyor belts; (n) hot oil boilers Op. 12.09.2006 Dec. 08.12.2006 - TC 0617185 8474.32.00 PLANT, ASPHALT MIXING, comprising ALL of the following: (a) feeders; (b) dryers; (c) heaters; (d) hoppers; (e) conveyors; (f) elevators; (g) burners; (h) fillers; (i) screeners; (j) pugmills; (k) mixing and weighing towers; (l) bitumen kettles or tanks; (m) controllers; (n) microprocessors; (o) storage bins or silos; (p) filters; (q) stacks Op. 22.06.2007 Dec. 07.09.2007 - TC 0709772 8474.32.00 ASPHALT PRODUCTION PLANT, comprising ALL of the following: (a) feeders and hoppers; (b) collection and transfer belts; (c) dryers and heaters; (d) dust collection modules; (e) elevators; (f) filler silos; (h) mixing towers; (i) bitumen tanks and bitumen pipes; (j) control containers Op. 03.09.2007 Dec. 16.11.2007 - TC 0713980 8474.32.00 PLANT, ASPHALT, programmable logic controlled, comprising ALL of the following: (a) bins; (b) conveyor belts; (c) dryers; (d) batch towers; (e) hot elevators; (f) vibrating screens; (g) weigh hoppers;



(h) pugmills; (i) electrically heated bitumen kettles; (j) baghouses; (k) baghouse dust silos; (l) dust elevators; (m) dust weigh hoppers; (n) lime or filler silos; (o) docket printers Op. 22.08.2007 Dec. 28.03.2008 - TC 0804867 8474.32.00 MIXING PLANT, COLD ASPHALT RECYCLED MIXTURES, trailer mounted Op. 04.08.2008 Dec. 24.10.2008 - TC 0824732 8474.32.00 ASPHALT PRODUCTION PLANT, comprising ALL of the following: (a) feeders and hoppers; (b) collection and transfer belts; (c) dryers and heaters; (d) dust collection modules; (e) elevators; (f) filler silos; (g) bitumen tanks and bitumen pipes; (h) control containers Op. 08.08.2008 Dec. 24.10.2008 - TC 0825778 8474.32.00 MIXING TOWER MODULE, ASPHALT PLANT Op. 05.09.2008 Dec. 28.11.2008 - TC 0829717 8474.32.00 ASPHALT PLANT, mobile capable, programmable logic controlled, comprising ALL of the following: (a) cold aggregates bin feeders; (b) continuous electronic belt weighers; (c) drying and mixing drums; (d) loadout conveyors; (e) pollution control units; (f) bitumen heating and storage tanks; (g) thermic oil heaters Op. 22.10.2008 Dec. 16.01.2009 - TC 0836431 8474.32.00 MIXING UNITS, TRIPLE BARREL DRUM, having ALL of the following: (a) three heat transfer zones, being: (i) convective; (ii) radiant; (iii) conductive; (b) mixing capacity up to 450 t/h of virgin and recycled asphalt and fines road base material, with a maximum of 50% being recycled material; (c) manufactured from stainless steel UN standards 31000 and 31008 Op. 20.10.1998 Dec. 30.12.1998 - TC 9809287 8474.39.00 BLENDERS, FRACTURING, trailer mounted, having ALL of the following: (a) diesel engines; (b) mixers; (c) densitometers AND/OR flowmeters; (d) hopper Op. 30.12.2009 Dec. 12.03.2010 - TC 0950549 8474.39.00 RECYCLING MACHINE, SOIL, track mounted Op. 16.02.2009 Dec. 15.05.2009 - TC 0905160



8474.39.00 MIXERS, SAND, having a mixing capacity NOT less than 18 t per hour Op. 06.01.2009 Dec. 03.04.2009 - TC 0946228 8474.39.00 MIXING AND BATCHING LINE, DRY, plc, having ALL of the following: (a) product dosers; (b) vibrating check screens and/or weighers; (c) fluid bed dryers; (d) elevators and conveyors; (e) batched material mixers; (f) rotary baggers; (g) bag feeders; (h) palletisers; (i) shrink wrappers Op. 08.08.2005 Dec. 21.10.2005 - TC 0510476 8474.39.00 PLANT, MANUFACTURING, ADHESIVE AND/OR BUILDING PRODUCTS, comprising ALL of the following: (a) fillers; (b) agitators; (c) tanks; (d) presses; (e) packers Op. 18.11.2005 Dec. 30.01.2006 - TC 0516375 8474.39.00 MIXERS, MINERAL, counter current Op. 23.12.2005 Dec. 17.03.2006 - TC 0601597 8474.39.00 AGITATORS, SLURRY TANK Op. 11.04.2006 Dec. 07.07.2006 - TC 0606837 8474.39.00 MIXERS, ORE CONCENTRATE PELLET Op. 11.04.2006 Dec. 07.07.2006 - TC 0606863 8474.39.00 RECLAIMERS, SOIL, MOBILE, having a mixing chamber containing ALL of the following: (a) soil cutter; (b) rotary hammers; (c) aftercutter Op. 05.10.2006 Dec. 15.12.2006 - TC 0615443 8474.39.00 MIXERS, PASTE, LEAD ACID BATTERY, comprising ALL of the following: (a) batch weighers; (b) conveyors; (c) controllers; (d) dischargers; (e) discharge tanks; (f) discharge doors Op. 14.09.2006 Dec. 08.12.2006 - TC 0617187 8474.39.00 MIXERS AND BATCHERS, TERRAZZO AND/OR CEMENT, TILES, comprising BOTH of the following: (a) dosers, whether or not including weighers; (b) planetary mixers Op. 03.04.2007 Dec. 22.06.2007 - TC 0705007 8474.39.00 MIXING PLANT, EARTH AND/OR MINERAL SUBSTANCES, automatic, having ALL of the following: (a) capacity NOT less than 20m3 per hour; (b) combined mixing and storage tanks; (c) integral weighing units; (d) charging auger; (e) feed pumps;



(f) water tanks; (g) double suspension filters; Op. 07.12.2007 Dec. 29.02.2008 - TC 0720953 8474.39.00 BLENDERS, FRACTURING, skid mounted, with or without feeders, having ALL of the following: (a) diesel engines; (b) mixers; (c) densitometers Op. 15.05.2008 Dec. 04.08.2008 - TC 0808248 8474.39.00 SPEED MIXERS, WET, comprising ALL of the following: (a) twin mix augers consisting of ALL of the following: (i) two piece earth auger drives; (ii) male hexagonal connectors; (iii) pressure swivels, (b) dual wall extension rods; (c) mixing heads; (d) mix pump stations; (e) flow meters; (f) worm pump screw conveyors Op. 24.10.2008 Dec. 16.01.2009 - TC 0836866 8474.39.00 CUTTER SOIL MIXERS, DRILL RIG OR PILE DRIVER Op. 15.12.2008 Dec. 06.03.2009 - TC 0843974 8474.39.00 MIXERS, COUNTER CURRENT, comprising ALL of the following: (a) inclined counter rotating mixing pan with an outside diameter NOT less than 2.5 meters and height NOT less than 1 meter; (b) self-cleaning, having wall and bottom scrapers; (c) self-discharging; (d) rotating mixing tool with a speed NOT less than 300 rpm; (e) mixing tool drive motor greater than 150 kw; (f) mixing cycle time NOT greater than 3 minutes at 1.5 tonnes per batch Op. 04.12.2003 Dec. 15.04.2004 - TC 0315321 8474.80 BLOCK MAKING MACHINES, concrete Op. 14.09.1984 Dec. 28.05.1985 - TC 8433337 8474.80 MOULDING MACHINES, slip, concrete Op. 18.07.1985 Dec. 18.07.1985 - TC 8533181 8474.80.00 PRESSES, BRIQUETTE, SHALE, vertical feed, double roll, having ALL of the following: (a) hoppers; (b) scrapers; (c) motors; (d) gearbox; (e) couplings; (f) hydraulics; (g) guards Op. 18.03.2010 Dec. 11.06.2010 - TC 1013709 8474.80.00 CONCRETE SHAPE MOULDING PLACEMENT SYSTEM, including ALL of the following: (a) hopper with agitator; (b) concrete discharger; (c) radio controls; (d) hydraulically adjustable screed; (e) gantry frame Op. 23.10.2009 Dec. 08.01.2010 - TC 0940172



8474.80.00 PRESSURE CASTING PLANT, SANITARY WARE AND/OR FIRING SETTERS, having ANY of the following: (a) pressure casting modules; (b) moulds; (c) dryer trolley; (d) demoulding tool; (e) photocell barriers; (f) clamping device; (g) solenoid control valves; (h) mould opening device; (i) slip heating tank; (j) slip recovery system; (k) air compressor; (l) gas heating device; (m) filters; (n) control system Op. 11.09.2009 Dec. 27.11.2009 - TC 0934178 8474.80.00 FOUNDRY EQUIPMENT, being EITHER of the following: (a) mould manipulators; (b) strickling units Op. 06.01.2009 Dec. 03.04.2009 - TC 0946126 8474.80.00 PRODUCTION LINE, CONCRETE PAVER, comprising ALL of the following: (a) wet batcher; (b) dry demoulder; (c) product palletiser Op. 19.07.2005 Dec. 23.09.2005 - TC 0509136 8474.80.00 PLANT, CLAY, PROCESSING AND/OR SHAPING, comprising ALL of the following: (a) apron feeders; (b) disintegrators; (c) fine roller mills; (d) pug mixers; (e) extruders and/or pug mills Op. 17.11.2005 Dec. 30.01.2006 - TC 0516069 8474.80.00 PLANT, REPACKING, comprising ALL of the following: (a) mixers; (b) ribbon blenders; (c) packers; (d) tanks; (e) homogenisers; (f) kettles Op. 18.11.2005 Dec. 06.02.2006 - TC 0516326 8474.80.00 PLANT, FOUNDRY MOULD FORMING, GREEN SAND, comprising ALL of the following: (a) foundry mould formers; (b) core setters; (c) sand suppliers; (d) mould transfer conveyors Op. 16.01.2006 Dec. 21.04.2006 - TC 0602382 8474.80.00 THICKENERS, TAILING AND CONCENTRATE Op. 11.04.2006 Dec. 07.07.2006 - TC 0605756 8474.80.00 PLANT, MOULDING, CONCRETE, having a gross weight NOT less than 30 t Op. 03.05.2006 Dec. 21.07.2006 - TC 0607777



8474.80.00 PLANT, ORE CONCENTRATOR, FILTER AND FLUXING, comprising ALL of the following: (a) tanks; (b) cyclone clusters; (c) feeders; (d) valves; (e) magnetic separators; (f) conveyors; (g) bentonite feeder weighers; (h) high pressure grinding rollers; (i) ball mills; (j) slurry pressure filters; (k) tailings and concentrate thickeners; (l) pumps; (m) flux grinding mills; (n) vibratory screens; (o) dosers; (p) filter cake mixers; (q) compressors; (r) mobile hoppers; (s) transformers Op. 10.05.2006 Dec. 21.07.2006 - TC 0608231 8474.80.00 PRESSERS AND DRYERS, CERAMIC TILES, comprising ALL of the following: (a) screeners; (b) belt conveyors; (c) bucket elevators Op. 20.03.2007 Dec. 15.06.2007 - TC 0704129 8474.80.00 PRESSES, TILE, rotating, programmable logic controlled, comprising ALL of the following: (a) hoppers; (b) moulds; (c) dosers; (d) spreaders; (e) elevators Op. 02.04.2007 Dec. 22.06.2007 - TC 0705006 8474.80.00 CONCRETE COATING MACHINES, STEEL PIPE Op. 30.11.2007 Dec. 08.02.2008 - TC 0720374 8474.80.00 DE-AIRING AND EXTRUSION MACHINES, BRICK AND TILE CLAY COLUMN MAKING Op. 13.03.2008 Dec. 30.05.2008 - TC 0803897 8474.80.00 PLANT, CONCRETE PANEL CASTING, programmable logic controlled, comprising the following: (a) casting pallets; (b) concrete spreaders; (c) magazine, cleaning and plotting machines; (d) pallet stacking and multi-lift overhead cranes; (e) pallet handling and transfer conveyors Op. 25.03.2008 Dec. 20.06.2008 - TC 0804547



8474.80.00 PLANT, MINED ORE CONCENTRATOR, comprising ALL of the following: (a) feed conveyor; (b) ball mills; (c) drums; (d) cyclones; (e) crushers; (f) apron feeders; (g) sieves; (h) drums; (i) control module; (j) magnetic separator; (k) cooling tower; (l) thickeners Op. 10.06.2008 Dec. 15.08.2008 - TC 0811920 8474.80.00 PLANT, MINED ORE PELLET, comprising ALL of the following: (a) mixers; (b) balling discs; (c) kiln; (d) coolers; (e) grates; (f) control module; (g) hoppers Op. 10.06.2008 Dec. 01.09.2008 - TC 0811921 8474.80.00 PRODUCTION LINE, CLAY BRICKS AND PAVERS, comprising ALL of the following: (a) setting and unloading robots; (b) pneumatic grippers; (c) integrated computer controlled transferrers, dryers and firers; (d) hydraulic kiln car controllers; (e) PLC production controllers; (f) PLC tool changers Op. 16.06.2004 Dec. 03.09.2004 - TC 0405777 8474.90.00 PARTS, HORIZONTAL STIRRED GRINDING MILL, being EITHER of the following: (a) agitator shafts; (b) drive shafts incorporating agitator shafts Op. 18.09.2009 Dec. 27.11.2009 - TC 0935315 8474.90.00 PARTS, DRILL RIG OR PILE DRIVER, SOIL AND CONCRETE MIXING CUTTER, being cutter wheel heads Op. 24.08.2009 Dec. 13.11.2009 - TC 0931106 8474.90.00 PARTS, HORIZONTAL STIRRED GRINDING MILL, being ANY of the following: (a) drive end flanges; (b) drive end flange liner outers; (c) drive end flange wear sleeves; (d) drive end flange liner inners; (e) displacement bodies; (f) discharge ring wear sleeves; (g) discharge rings; (h) displacement body end plates; (i) discharge body end plate liners; (j) rotors; (k) rotor bushes; (l) shaft spacers; (m) shaft end caps; (n) shaft end cap face plates; (o) rotor rings; (p) rotor fingers;



(q) non-drive end flanges; (r) non-drive end flange liners; (s) non-drive end flange liner wear sleeves; (t) scuttle sleeves; (u) non-abrasive grinding discs; (v) hubs; (w) gland inner sleeves; (x) gland wear sleeves; (y) gland housing wear caps; (z) gland housing extensions; (aa) gland housings; (ab) gland cushions; (ac) gland neck rings; (ad) gland lantern rings; (ae) gland followers; (af) gland cushion protection ring retainers; (ag) shell liners Op. 01.04.2009 Dec. 02.09.2009 - TC 0932294 8474.90.00 PARTS, GYRATORY CRUSHER OR JAW GYRATORY CRUSHER, being ANY of the following: (a) spiders and/or spider helms; (b) wear segments and/or plates; (c) shields and/or guards; (d) shafts; (e) mantles; (f) ring dust seals; (g) shells; (h) crusher axle hydraulics; (i) cylinders; (j) lubricators Op. 09.06.2009 Dec. 04.09.2009 - TC 0919388 8474.90.00 PARTS, FEED AND/OR DISCHARGE ARRANGEMENT, GRINDING MILL, being ANY of the following: (a) feed endplates; (b) feed spouts and/or feed shafts; (c) discharge endplates; (d) discharge cylinders; (e) hoppers Op. 09.06.2009 Dec. 04.09.2009 - TC 0919385 8474.90.00 PARTS, SPIKE ROLL SINTER CRUSHER, being shafts Op. 28.04.2009 Dec. 17.07.2009 - TC 0914119

8474.90.00 ROLLERS, PRESS, STUD LINED, comprising ALL of the following: (a) roll diameter NOT less than 1.35 metres and NOT greater than 2.1 metres; (b) roll width NOT less than 1.05 metres and NOT greater than 1.8 metres; (c) stud diameter NOT greater than 18 millimetres Op. 04.11.2005 Dec. 03.02.2006 - TC 0515342 8474.90.00 ROLLERS, PRESS, FORGED, comprising ALL of the following: (a) roll diameter NOT less than 1.35 metres and NOT greater than 2.1 metres; (b) roll width NOT less than 1.05 metres and NOT greater than 1.8 metres; (c) rough roll and/or tyre surface Op. 04.11.2005 Dec. 30.01.2006 - TC 0515343



8474.90.00 PLANT, MANUFACTURING, WOODCARE PRODUCTS, comprising ALL of the following: (a) tanks; (b) pumps; (c) agitators; (d) packers Op. 18.11.2005 Dec. 06.02.2006 - TC 0516374 8474.90.00 PARTS, ROLLER CRUSHER, being roller cores comprising bearings and bearing housings Op. 16.06.2006 Dec. 08.09.2006 - TC 0610327 8474.90.00 LUBRICATORS, BALL MILL Op. 22.06.2006 Dec. 15.09.2006 - TC 0610739 8474.90.00 SHELL, BALL MILL Op. 22.08.2006 Dec. 10.11.2006 - TC 0613750 8474.90.00 PARTS, ROLLER MILL, being roller shells Op. 10.11.2006 Dec. 02.02.2007 - TC 0618438 8474.90.00 PARTS, CONCRETE MOULDING PLANT, FLAT ELEMENTS, being ANY of the following: (a) integrated pallet circulators; (b) oscillating compactors; (c) panel storers and transferors; (d) panel support moulds; (e) concrete spreaders; (f) concrete spreader bridges; (g) integrated panel moulding shutters and handlers; (h) flat panel demoulders; (i) shutter cleaners Op. 24.07.2007 Dec. 09.10.2007 - TC 0711893 8474.90.00 PARTS, ORE CRUSHERS AND/OR GRINDERS, TRACK MOUNTED, being ANY of the following: (a) chassis axles and undercarriages; (b) chassis; (c) conveyor covers; (d) conveyor head and tail drums; (e) conveyor skirts; (f) conveyor take ups; (g) cover plates; (h) discharge chutes; (i) door locking brackets; (j) drive couplings; (k) drive coupling covers; (l) drive guards; (m) engine covers; (n) engine sub-frames; (o) feed trays; (p) feeder outlets; (q) feeder spring mounts; (r) grizzly cartridges; (s) head scrapers; (t) hopper wing supports; (u) idler frames; (v) idlers; (w) impact bars; (x) inspection doors; (y) jaw feed chutes; (z) jaw positioning blocks; (aa) main conveyor heads; (ab) main conveyor tails;



(ac) plain carry rolls; (ad) rear wing cylinders; (ae) removable sub-chassis; (af) return to rolls; (ag) return roller guards; (ah) roll guards and brackets; (ai) side conveyor trusses; (aj) side rails and plates; (ak) tail bearings; (al) tail drums; (am) tail scrapers; (an) take up and motor mounts; (ao) tanks; (ap) track chassis axles; (aq) track extension plates; (ar) trainers; (as) truss hinges; (at) walkways; (au) weight scale idlers Op. 10.09.2007 Dec. 30.11.2007 - TC 0714693 8474.90.00 TOP SHELLS, GYRATOR CRUSHER, symmetrical, having ALL of the following: (a) bowl height of NOT less than 2.4 m; (b) bottom diameter of NOT less than 3.5 m; (c) top diameter of NOT less than 4.5 m Op. 21.11.2007 Dec. 01.02.2008 - TC 0719758 8474.90.00 PARTS, ORE CRUSHERS AND/OR GRINDERS, TRACK MOUNTED, being ANY of the following: (a) crawler track units; (b) track plates; (c) wheels; (d) rollers Op. 21.11.2007 Dec. 01.02.2008 - TC 0719765 8474.90.00 PARTS, VERTICAL SPINDLE ROLLER MILL, being ANY of the following: (a) grinding bowls; (b) grinding plates; (c) cover hoods; (d) cover plates Op. 10.01.2008 Dec. 28.03.2008 - TC 0800474 8474.90.00 PARTS, MINERAL SAND PROCESSING PLANT, TRACK MOUNTED, being track side frames Op. 21.02.2008 Dec. 28.04.2008 - TC 0802859 8474.90.00 PARTS, IMPACT HAMMER MILL, being rotors, comprising ALL of the following: (a) rotor shaft; (b) rotor discs; (c) hammer shafts Op. 11.06.2008 Dec. 22.08.2008 - TC 0812065 8474.90.00 FOAMED BITUMEN MODULE, ASPHALT PLANT Op. 05.09.2008 Dec. 28.11.2008 - TC 0829750 8474.90.00 TROMMELS, SEMI-AUTOGENOUS GRINDING (SAG) MILL Op. 23.09.2008 Dec. 12.12.2008 - TC 0832371 8474.90.00 PARTS, ROLLER PRESS, being roller tyres having a powder metallurgical hot isostatically pressed wear surface Op. 19.11.2008 Dec. 06.02.2009 - TC 0840468



8474.90.00 PARTS, PRESSURE CASTING PLANT, SANITARY WARE, slip, being ANY of the following: (a) process control cabinet; (b) electrical distribution cabinet; (c) pneumatic switch cabinet; (d) work piece lifters; (e) work piece racks; (f) work piece handlers and work piece finishers; (g) finishing tables; (h) conveyors; (i) tool racks; (j) pressure vessels; (k) slip manifolds; (l) water tanks; (m) water filters; (n) electro-mechanical safety barriers; (o) robot pedestals; (p) gripper racks; (q) date stamper; (r) electrical trunking; (s) pumps; (t) air compressors; (u) hydraulic power unit; (v) hydraulic rams; (w) valves; (x) mould frames; (y) caster benches; (z) demoulders Op. 06.10.2004 Dec. 04.01.2005 - TC 0410524 8474.90.00 PARTS, PULVERISER, BOILER, being anchor plates and/or frames Op. 10.01.2005 Dec. 18.03.2005 - TC 0500319 8475.29 GLASS CONTAINER MANUFACTURING EQUIPMENT, being ANY of the following: (a) forehearth channels, molten glass; (b) feeder mechanisms, gob; (c) forming machines, multiple gob; (d) alignment fixtures, forming machine Op. 01.07.1996 Dec. 25.06.1996 - TC 9607127 8475.29.00 GLASSWOOL ROLL MANUFACTURING LINE, insulation fibre, having ALL the following: (a) furnace and forehearth molten glass refractories; (b) formers and curers; (c) adjustable working width NOT less than 1.2 m but NOT greater than 1.5 m; (d) roll formers; (e) wrappers and packagers Op. 04.08.2005 Dec. 21.10.2005 - TC 0510271 8475.29.00 FLOAT GLASS PRODUCTION LINE, comprising ALL of the following: (a) batch processors; (b) melting furnaces; (c) float glass forming chambers; (d) annealing lehrs; (e) cold glass processors; (f) glass handlers; (g) cullet modules Op. 10.10.2007 Dec. 30.01.2008 - TC 0717256



8475.90.00 PARTS, GLASS BOTTLE MOULD, being ANY of the following: (a) baffle spacers; (b) baffle inserts; (c) diffusers Op. 30.03.2009 Dec. 19.06.2009 - TC 0910641 8475.90.00 PARTS, GLASS FIBRE MANUFACTURING LINE, FIBRE SPINNING, metal, being ANY of the following: (a) spinners; (b) covers; (c) inner and/or outer lips; (d) hubs; (e) inner and/or outer walls; (f) supports; (g) baskets; (h) blowing crowns; (i) centre plates Op. 07.05.2007 Dec. 23.07.2007 - TC 0701754 8475.90.00 PARTS, MULTI SECTION GLASS FORMING MACHINE, being ANY of the following: (a) bed and uprights; (b) timing drum bracket; (c) overhead beam; (d) manifold and detector beam; (e) section frame; (f) mould opening and closing mechanism; (g) mould holder supporting mechanism; (h) mould holder; (i) funnel mechanism; (j) funnel arms; (k) baffle mechanism; (l) baffle arms; (m) constant cushion invert mechanism; (n) neck ring mechanism; (o) neck ring arms; (p) vacuum bottom plate mechanism; (q) vacuum bottom plate adaptor; (r) blowhead mechanism; (s) internal cooling blowhead arm; (t) constant cushion take out mechanism; (u) take out tong head; (v) vertiflow blow mould cooling mechanism; (w) plunger, plunger cooler, plunger mechanism; (x) floating plunger positioner; (y) change cartridge; (z) delivery supporting mechanism Op. 10.11.1997 Dec. 16.01.1998 - TC 9709919 8476.21 VENDING MACHINES, automatic, being EITHER of the following: (a) beverage, being ANY of the following: (i) refrigerated, capable of automatically recording sales; (ii) refrigerated, cartons, cans or bottles; (iii) heated or carbonated, capable of automatic provision and filling of cups; (b) food, heated or refrigerated Op. 01.07.1996 Dec. 01.07.1996 - TC 9607116



8476.21.00 VENDING MACHINES, beverage, having ALL of the following: (a) coin selector operated with programmable vending price adjustment; (b) microprocessor controlled with programmed logic controller and diagnostic and retrievable memory; (c) bean grinder espresso process brewer; (d) volumetrically controlled liquid dosing for accurate level control; (e) digitally programmable temperature control; (f) capable of dispensing 3, 5 or 7 hot beverages all individually adjustable via programmable unit; (g) capable of direct connect plumbing or via container located in cabinet and pumped through to boiler; (h) push-button operated stirrer dispenser; (i) drip tray connected to container with overflow sensor and waste collection bucket Op. 01.07.1996 Dec. 25.06.1996 - TC 9607151 8476.29 VENDING MACHINES, automatic, electronically controlled, capable of giving change Op. 01.07.1996 Dec. 25.06.1996 - TC 9607133 8476.81 VENDING MACHINES, automatic, being EITHER of the following: (a) beverage, being ANY of the following: (i) refrigerated, capable of automatically recording sales; (ii) refrigerated, cartons, cans or bottles; (iii) heated or carbonated, capable of automatic provision and filling of cups; (b) food, heated or refrigerated Op. 01.07.1996 Dec. 25.06.1996 - TC 9607122 8476.81.00 VENDORS, combination food and beverage Op. 07.07.2004 Dec. 01.10.2004 - TC 0406875 8476.89 VENDING MACHINES, automatic, being ANY of the following: (a) change, coded card operated; (b) cigarette or tobacco products; (c) food Op. 01.07.1996 Dec. 25.06.1996 - TC 9607118 8476.89 VENDING MACHINES, coin operated, encapsulated novelty toy, incorporating animated talking characters Op. 01.07.1996 Dec. 25.06.1996 - TC 9607130 8476.89 VENDING MACHINES, automatic, electronically controlled, capable of giving change Op. 01.07.1996 Dec. 01.07.1996 - TC 9607134 8476.89.00 VENDING MACHINES, mechanical operation, coin operated, perfume dispensing Op. 01.07.1996 Dec. 25.06.1996 - TC 9607148 8476.89.00 VENDING MACHINES, golf ball, electronically controlled, operated by tokens and/or pre-paid cards, having BOTH of the following: (a) microprocessor controlled token and/or card acceptance device; (b) dispensing of predetermined number of golf balls according to token and/or card value Op. 01.07.1996 Dec. 25.06.1996 - TC 9607150 8476.89.00 VENDORS, DVD AND/OR VIDEO AND/OR GAME Op. 05.10.2004 Dec. 10.12.2004 - TC 0410393



8476.90.00 PARTS, AUTOMATIC VENDING MACHINE, being ANY of the following: (a) 300 ml converters; (b) adaptors; (c) air dampers; (d) air dams; (e) anchors; (f) angles; (g) anti noise weights; (h) anti theft girdles; (i) anti theft partitions; (j) anti tilts; (k) anti vandal barriers; (l) arms; (m) augers; (n) axles; (o) backing plates; (p) baffles; (q) bags; (r) bails; (s) bars; (t) bases; (u) bezels; (v) bin boxes; (w) bins; (x) blockers; (y) blocks; (z) boards; (aa) bottle converters; (ab) bottle to can conversions; (ac) boxes; (ad) braces; (ae) buckets; (af) bulkhead supports; (ag) bulkheads; (ah) bumpers; (ai) bushings; (aj) buttons; (ak) cab latches; (al) cabinets; (am) cages; (an) cam strikes; (ao) cams; (ap) can converters; (aq) can staggers; (ar) can to bottle conversions; (as) caps; (at) carriages; (au) carrier strips; (av) carriers; (aw) cash boxes; (ax) castings; (ay) channels; (az) chassis; (ba) chokes; (bb) chutes; (bc) cleaners; (bd) clips; (be) closure caps; (bf) closures; (bg) coders; (bh) coin bag mountings; (bi) coin box locks; (bj) coin boxes; (bk) coin channels;



(bl) coin cups; (bm) coin inserts; (bn) coin return pivots; (bo) coin returns; (bp) coin slots; (bq) coin wrappers; (br) coinage extensions; (bs) collars; (bt) control boxes; (bu) conversions; (bv) converters; (bw) correct change panels; (bx) counter weights; (by) coupling cams; (bz) couplings; (ca) cover plates; (cb) covers; (cc) crank coin return levers; (cd) cross straps; (ce) crown blockers; (cf) crown boxes; (cg) cups; (ch) deflectors; (ci) delivery chutes; (cj) delivery eyelets; (ck) door frames; (cl) door patches; (cm) door protection; (cn) door protectors; (co) doors; (cp) drain tubes; (cq) drain tubing; (cr) drains; (cs) duct wires; (ct) ducts; (cu) emitter boards; (cv) expellers; (cw) extensions; (cx) feet; (cy) filler plugs; (cz) flanges; (da) flaps; (db) frames; (dc) gate links; (dd) gates; (de) gauge bars; (df) glide cage supports; (dg) guards; (dh) guides; (di) gutters; (dj) handles; (dk) hangers; (dl) harnesses; (dm) hasps; (dn) headers; (do) holders; (dp) holding dogs; (dq) hopper extensions; (dr) hoppers; (ds) housings; (dt) hubs; (du) inner door foam; (dv) inserts; (dw) interfaces;



(dx) jumpers; (dy) keepers; (dz) knobs; (ea) latch mechanisms; (eb) latch plates; (ec) latch strikes; (ed) latches; (ee) legs; (ef) leveling bolts; (eg) levellers; (eh) levelling legs; (ei) lever arms; (ej) levers; (ek) liners; (el) linkages; (em) links; (en) load racks; (eo) lock cams; (ep) lock stud kits; (eq) louvres; (er) manifolds; (es) mountings; (et) mounts; (eu) muzzles; (ev) noses; (ew) openers; (ex) orifices; (ey) overload protectors; (ez) pads; (fa) panels; (fb) pans; (fc) partitions; (fd) pawls; (fe) pins; (ff) pivots; (fg) plates; (fh) platforms; (fi) plug rivets; (fj) plugs; (fk) plungers; (fl) prefillers; (fm) price panels; (fn) protectors; (fo) pullers; (fp) punchers; (fq) pushers; (fr) racks; (fs) rain guards; (ft) rain gutters; (fu) rain troughs; (fv) ramps; (fw) receptacles; (fx) reflectors; (fy) reinforcements; (fz) release pins; (ga) retainers; (gb) returns; (gc) rings; (gd) rods; (ge) rollers; (gf) safeguards; (gg) safety screens; (gh) scavengers; (gi) screens;



(gj) selection buttons; (gk) sensors; (gl) service cords; (gm) shelves; (gn) shields; (go) shims; (gp) shrouds; (gq) side glass/poly vinyl chloride assemblies; (gr) sign caps; (gs) sign faces; (gt) sign frames; (gu) sign retainers; (gv) signs; (gw) slides; (gx) slots; (gy) snouts; (gz) sold out levers; (ha) sold out panels; (hb) solder unions; (hc) spacers; (hd) stabilisers; (he) stacks; (hf) stands; (hg) starters; (hh) stiffeners; (hi) stops; (hj) straps; (hk) strikes; (hl) strips; (hm) supports; (hn) tags; (ho) tilt stops; (hp) timing cams; (hq) tracks; (hr) trays; (hs) trims; (ht) vend buckets; (hu) wheels; (hv) window panels; (hw) windows; Op. 10.12.1997 Dec. 06.03.1998 - TC 9710857 8476.90.00 COIN CHANGERS, VENDING MACHINE, electronic, having ALL of the following: (a) facility to accept coins AND/OR tokens of 12 OR more varying denominations; (b) operate in conjunction with credit displays and bill validators; (c) record both cash received and the number of units sold; (d) 3 OR more denominational change payout; (e) "use correct change" indicator Op. 18.02.1998 Dec. 24.04.1998 - TC 9801462 8477.10 MOULDING MACHINES, injection, vertical rubber Op. 16.10.1984 Dec. 16.10.1984 - TC 8434687 8477.10.00 INJECTION MOULDING SYSTEM, comprising injection moulding machine, having one or more of the following: (a) tooling; (b) robot handling units; (c) water chillers; (d) dehumidifiers; (e) resin dryers and transfer units; (f) additive dosing units;



(g) conveyors; (h) preform handlers; (i) moulds; (j) compressors Op. 31.08.2009 Dec. 20.11.2009 - TC 0932239 8477.10.00 PLANT, PRODUCTION, INJECTION MOULDING, comprising ALL of the following: (a) injection moulders; (b) labellers; (c) palletisers; (d) stretch wrappers Op. 01.01.2007 Dec. 16.11.2006 - TC 0614294 8477.10.00 INJECTION MOULDING MACHINES Op. 01.01.2007 Dec. 16.11.2006 - TC 0614295 8477.20.00 EXTRUDER MACHINES, CABLE OR TUBE OR CONDUIT Op. 10.09.2009 Dec. 27.11.2009 - TC 0933723 8477.20.00 PLASTIC BLOWN FILM EXTRUSION PLANT, comprising ALL of the following: (a) extruders; (b) control panel; (c) die pack; (d) airing blower; (e) heat exchanger; (f) 3 way valve; (g) hopper; (h) electrical controls Op. 18.12.2008 Dec. 13.03.2009 - TC 0844533 8477.20.00 EXTRUSION LINES, SINGLE SCREW, polyethylene piping, comprising ALL of the following: (a) extruders; (b) coolers; (c) cutters Op. 10.05.2006 Dec. 28.07.2006 - TC 0608150 8477.20.00 EXTRUDERS, HIGH DENSITY POLYETHLENE (HDPE), single screw, comprising BOTH of the following: (a) bimetallic barrels; (b) grooved haul in bushes Op. 01.11.2006 Dec. 30.01.2007 - TC 0618077 8477.20.00 EXTRUDERS, RECYCLED POLYETHYLENE TEREPHTHALATE (PET), comprising ALL of the following: (a) feeders; (b) single heated screws with variable speed drives; (c) air or water coolers; (d) digital temperature controls; (e) hydraulic screen changers; (f) melt pumps; (g) static melt mixers; (h) 3-layer feed blocks Op. 22.11.2006 Dec. 02.03.2007 - TC 0618761 8477.20.00 EXTRUDERS, WASTE PLASTIC, comprising ALL of the following: (a) draw in device; (b) single screw extruder with conical screw geometry; (c) die face cutter; (d) pneumatic suction; (e) control cabinet Op. 08.03.2007 Dec. 05.07.2007 - TC 0710482



8477.20.00 EXTRUDERS, RUBBER COMPOUND, cold feed, pin barrel, having integrated temperature control Op. 09.08.2007 Dec. 12.10.2007 - TC 0712794 8477.20.00 EXTRUSION PLANT, PLASTIC BLOWN FILM, comprising ALL of the following: (a) extruders with geared melt pumps; (b) control panels; (c) multi-layer die packs; (d) air-ring cooling blowers; (e) film pre-heating systems; (f) gravimetric feeding and/or dosing systems; (g) calibration baskets; (h) film haul-off units; (i) winders; (j) electrical controls Op. 09.12.2008 Dec. 06.03.2009 - TC 0843181 8477.20.00 EXTRUDERS, RUBBER COMPOUND, cold feed, mixing scroll, with integrated temperature control Op. 27.03.1996 Dec. 19.07.1996 - TC 9604992 8477.20.00 EXTRUDERS, RUBBER COMPOUND, single screw with water jacketed temperature control and integrated horizontal tapered twin screw feeder Op. 11.08.1997 Dec. 07.11.1997 - TC 9706975 8477.20.00 EXTRUDING MACHINES, PLASTIC BLOWN FILM, single screw, having ALL of the following: (a) extruder; (b) control panel; (c) die pack; (d) airing blower; (e) heat exchanger; (f) 3 way valve; (g) hopper; (h) electrical controls Op. 15.09.1997 Dec. 28.11.1997 - TC 9708140 8477.20.00 EXTRUDERS, WASTE PLASTIC, comprising ALL of the following: (a) feeders; (b) single heated screws with variable speed drive; (c) extrusion dies; (d) air OR water coolers; (e) refeed centrifuges; (f) digital temperature controls Op. 11.02.1999 Dec. 23.04.1999 - TC 9901058 8477.20.00 EXTRUDER, twin screw Op. 13.04.2000 Dec. 30.06.2000 - TC 0003797 8477.20.00 EXTRUDERS, single screw, consisting of ALL of the following: (a) nitride steel barrel; (b) NOT less than 3 heaters; (c) NOT less than 3 coolers Op. 02.12.2003 Dec. 08.03.2004 - TC 0315271 8477.20.00 EXTRUDERS, SINGLE SCREW, POLYETHYLENE OR POLYPROPYLENE, comprising ALL of the following: (a) nitrided steel barrel; (b) heaters; (c) coolers ; (d) thermo-adjusting controls Op. 05.03.2004 Dec. 31.05.2004 - TC 0402478



8477.30 MOULDERS, blow, but NOT including blow moulders when imported with deflashers or punching stations unless they form an integral part of the moulding machine Op. 19.06.1984 Dec. 23.03.1988 - TC 8735106 8477.30 MOULDING MACHINES SYSTEMS, blow, whether or NOT incorporating the following: (a) cooling conveyor; (b) trimmer deflasher; (c) horizontal bottle pressure tester, but NOT including separately imported extruder screws and barrels Op. 14.04.1989 Dec. 30.07.1991 - TC 8903174 8477.30.00 MACHINES, BLOW MOULDING Op. 12.07.2007 Dec. 02.10.2007 - TC 0711275 8477.30.00 BLOW MOULDERS, comprising ALL of the following: (a) line tipper; (b) preform hopper; (c) unscrambler; (d) infeed rail Op. 29.04.2003 Dec. 21.07.2003 - TC 0304929 8477.30.00 BLOW MOULDERS, POLYCARBONATE Op. 30.11.2004 Dec. 11.02.2005 - TC 0412879 8477.40.00 VACUUM THERMOFORMING MACHINES, programmable logic controlled, multi-shift operation, having ALL of the following: (a) un-winder; (b) sheet feeding module; (c) inline steel rule cutting; (d) sheet transport system; (e) non-contact sheet heating system; (f) forming module; (g) vertical stacker; (h) scrap winder; (i) pneumatic system; (j) electrical controls and main cabinet; (k) water system Op. 22.10.2009 Dec. 08.01.2010 - TC 0939786 8477.40.00 PRESSURE FORMING LINE, programmable logic controlled, comprising ALL of the following: (a) material roll stand; (b) thermoforming machine; (c) punch press; (d) stacking station Op. 01.06.2009 Dec. 18.09.2009 - TC 0918510 8477.40.00 PRESSURE FORMING LINE, plc, comprising ALL of the following: (a) film unreeling stations; (b) metal heating elements; (c) swift stackers; (d) sleeving units; (e) granulators Op. 21.09.2005 Dec. 16.12.2005 - TC 0512568 8477.40.00 EMBOSSERS, HOT, having BOTH of the following: (a) stamp thickness NOT greater than 17 mm; (b) stamper size NOT exceeding 200 mm diagonally Op. 23.01.2006 Dec. 19.06.2006 - TC 0602847



8477.40.00 FORMERS, PRESSURE, programmable logic controller, having BOTH of the following; (a) forming area NOT less than 760 mm x 545 mm; (b) depth of draw NOT greater than 120 mm; Op. 04.04.2006 Dec. 30.06.2006 - TC 0606244 8477.40.00 FORMERS, TUBING VACUUM, having BOTH of the following: (a) vacuum tanks; (b) seal flange diameter length NOT less than 315 mm and NOT greater than 1 200 mm Op. 03.11.2006 Dec. 19.01.2007 - TC 0612276 8477.40.00 LINES THERMOFORMER, programmable logic control, comprising ALL of the following: (a) film unreelers; (b) roll pre-heaters; (c) thermoformers; (d) stackers; (e) granulators; (f) wrappers Op. 12.09.2006 Dec. 08.12.2006 - TC 0617155 8477.40.00 THERMOFORMERS, VACUUM, programmable logic controlled, comprising ALL of the following: (a) formers; (b) laminators; (c) vacuum embossers; (d) cutting and holding tables Op. 17.11.2006 Dec. 09.02.2007 - TC 0618626 8477.40.00 LINES, PRESSURE FORMING, programmable logic controlled (plc), comprising ALL of the following: (a) film unreelers; (b) roll pre-heaters; (c) thermoformers; (d) granulators Op. 22.01.2007 Dec. 13.04.2007 - TC 0701142 8477.40.00 FORMERS, TUBING, vacuum, having a seal flange diameter NOT greater than 2 000 mm Op. 02.02.2007 Dec. 30.04.2007 - TC 0701746 8477.40.00 FORMERS, PRESSURE, programmable logic controlled, comprising ALL of the following: (a) film roll lifters; (b) film pre-heating stations; (c) forming area NOT greater than 520 mm length and NOT greater than 400 mm width; (d) draw depth NOT greater than 120 mm; (e) cutting stations; (f) stacking stations; (g) residual foil winders Op. 30.05.2007 Dec. 17.08.2007 - TC 0708211 8477.40.00 CALIBRATORS, VACUUM, PIPE EXTRUSION LINE, single OR twin chamber Op. 28.06.2007 Dec. 14.09.2007 - TC 0710146



8477.40.00 LINE, VACUUM AND PRESSURE THERMOFORMING, programmable logic controlled, comprising ALL of the following: (a) film unwinders; (b) upper and lower infra-red heating elements; (c) thermoformers; (d) punching presses; (e) cutting presses; (f) vertical stackers; (g) scrap winders Op. 05.05.2008 Dec. 25.07.2008 - TC 0806483 8477.40.00 VACUUM THERMOFORMING MACHINES, automatic, computer controlled, multi shift operation, having ALL of the following: (a) maximum forming area 700 mm x 500 mm; (b) height of forming above/below working level 120/40 mm; (c) upper and lower ceramic heater elements; (d) automatic stacking system device and steel rule punch press; (e) digital adjustment and storage of movements and speeds; (f) automatic skeletal rewinding; (g) process data control and error diagnosis; (h) automatic format change Op. 08.04.1993 Dec. 23.07.1993 - TC 9309077 8477.40.00 FORMING MACHINES, VACUUM, computer controlled, having BOTH of the following: (a) adjustable platten size NOT less than 3 square metres; (b) adjustable draw depth NOT less than 1 000 mm Op. 21.05.2003 Dec. 15.08.2003 - TC 0306039 8477.40.00 FORMERS, PRESSURE, plc, comprising ALL of the following: (a) forming area NOT less than 760 mm x 575 mm, with a depth of draw NOT greater than 120 mm; (b) forming moulds whether or not including integral cutting knives; (c) digitally adjusted forming tables; (d) stacking and counting tables Op. 23.02.2005 Dec. 13.05.2005 - TC 0502565 8477.51.00 PRESSES, VULCANISING, TYRE CURING Op. 13.10.1997 Dec. 19.12.1997 - TC 9709018 8477.59 MOULDING MACHINES, vacuum assisted, expandable polystyrene, contoured shape Op. 02.12.1983 Dec. 02.12.1983 - TC 8335169 8477.59 MOULDING MACHINES, rotational Op. 16.10.1984 Dec. 16.10.1984 - TC 8434688 8477.59 FORMING MACHINES, polyurethane foam, microprocessor controlled, incorporating a mixing unit Op. 01.01.1990 Dec. 27.04.1990 - TC 9000989 8477.59.00 WEB MAKING MACHINES, DIAGNOSTIC STRIP, programmable logic controlled Op. 03.03.2010 Dec. 14.05.2010 - TC 1010974 8477.59.00 MICRO MODELLERS, STEREO LITHOGRAPHIC, plc, having a slice processor Op. 16.11.2005 Dec. 30.01.2006 - TC 0516030 8477.59.00 COIL AND/OR SPIRAL FORMING MACHINES, having an input feed diameter NOT less than 6 mm and NOT greater than 55 mm Op. 20.05.2009 Dec. 14.08.2009 - TC 0917154



8477.59.00 MICRO MODELLERS, STEREO LITHOGRAPHIC, plc, having a slice processor Op. 16.11.2005 Dec. 30.01.2006 - TC 0516030 8477.59.00 COMPRESSION PLASTIC MOULDERS, FOLDING AND SLITTING LINE, comprising BOTH of the following: (a) compression moulding press and moulds; (b) folders and/or cutters Op. 01.03.2006 Dec. 17.05.2006 - TC 0604622 8477.59.00 MACHINES, DIAGNOSTIC STRIP, WEB MAKING, programmable logic controlled, having ALL of the following: (a) unwinders and rewinders; (b) splice tables; (c) syringe pumps; (d) infra red dryers and sensors; (e) hot air dryers; (f) active web guides; (g) vision modules; (h) lamination rollers; (i) tool die stations; (j) vacuum waste removers; (k) reject markers Op. 02.03.2007 Dec. 25.05.2007 - TC 0703429 8477.59.00 PRINTERS, THREE-DIMENSIONAL Op. 09.07.2007 Dec. 02.10.2007 - TC 0710735 8477.59.00 SLEEVES 0R FORMERS, ADJUSTABLE CALIBRATING Op. 27.11.2007 Dec. 08.02.2008 - TC 0719748 8477.59.00 MOULDING MACHINES, POLYSTYRENE BLOCK, programmable logic controlled Op. 09.01.2008 Dec. 25.03.2008 - TC 0800533 8477.59.00 RUBBER MOULDING MACHINES, compression, having a clamping force of NOT less than 2 000 tonne Op. 14.01.2008 Dec. 28.03.2008 - TC 0800795 8477.59.00 COMPRESSING AND/OR BONDING MACHINES, recycled polyurethane Op. 29.02.2008 Dec. 16.05.2008 - TC 0803411 8477.59.00 MILLING MACHINES, RUBBER INSOLE, with or without exhauster, comprising BOTH of the following: (a) power supply; (b) control rack Op. 25.07.2008 Dec. 17.10.2008 - TC 0823269 8477.59.00 LINE, PLASTIC PROCESSING, having ALL of the following: (a) hoppers; (b) granulators; (c) ventilators; (d) conveyors; (e) filters Op. 15.05.2008 Dec. 25.08.2008 - TC 0827461 8477.59.00 AIR CUSHION PRODUCTION MACHINE Op. 15.09.2008 Dec. 05.12.2008 - TC 0831550 8477.59.00 PROTOTYPING MACHINES, computer controlled, having dual inkjet depositing heads Op. 10.08.2001 Dec. 26.10.2001 - TC 0106991



8477.59.00 FOAM PLANTS, POLYURETHANE, REFRIGERATOR OR FREEZER DOOR Op. 06.05.2002 Dec. 02.08.2002 - TC 0203831 8477.59.00 CAPSULE MAKER, BOTTLE Op. 30.04.2003 Dec. 25.07.2003 - TC 0305028 8477.80 PELLETISING MACHINES, strand, being goods to which subheading 8477.80 in Schedule 3 to the Customs Tariff Act 1987 applies Op. 21.12.1988 Dec. 01.08.1989 - TC 8810599 8477.80 CUTTING MACHINES, roll rubber, automatic with size programming of the cut strips Op. 20.11.1989 Dec. 05.09.1990 - TC 9000057 8477.80.00 HOLE PUNCHING MACHINES, FOAM Op. 20.04.2010 Dec. 25.06.2010 - TC 1017853 8477.80.00 METERING AND DOSING SYSTEM, PLASTIC RESIN, including ALL of the following: (a) metering pumps; (b) valve blocks; (c) valves; (d) ring piping; (e) static mixers; (f) shrinkage compensation units Op. 14.05.2009 Dec. 31.07.2009 - TC 0916471 8477.80.00 PLASTIC FILM CONVERTING MACHINES Op. 24.12.2008 Dec. 20.03.2009 - TC 0845337 8477.80.00 RECYCLING PLANT, TYRE, comprising ALL of the following: (a) chopper; (b) rasper; (c) granulator; (d) classifier; (e) aspirator; (f) stoner Op. 11.05.2005 Dec. 07.10.2005 - TC 0505231 8477.80.00 WINDERS, PLASTIC FILM, plc Op. 12.05.2005 Dec. 23.09.2005 - TC 0505242 8477.80.00 EXTRUSION LINE, FLAT AND PROFILED SHEETS, plc, comprising All of the following: (a) gravimetric dosers; (b) polymer feed pumps; (c) coextruders; (d) calenders; (e) take off stations; (f) circular saw cross cutters; (g) bilateral stackers; (h) sheet profiling stations Op. 05.10.2005 Dec. 03.01.2006 - TC 0513495 8477.80.00 GRANULATORS, RECYCLING PLASTIC Op. 04.11.2005 Dec. 30.01.2006 - TC 0515403 8477.80.00 EXTRUSION PLANT, RIGID PVC PROFILE, comprising ALL of the following: (a) twin screw extruder; (b) dosers; (c) hoppers; (d) calibration tables; (e) haul offs;



(f) gantries; (g) chiller tanks; (h) cyclons; (i) debaggers; (j) dedusters Op. 04.11.2005 Dec. 23.01.2006 - TC 0515414 8477.80.00 PERFORATORS, NEEDLE Op. 31.08.2006 Dec. 17.11.2006 - TC 0616332 8477.80.00 BUFFERS, RUBBER TYRE Op. 07.11.2006 Dec. 30.01.2007 - TC 0618337 8477.80.00 CUTTERS, VINYL, computer controlled Op. 20.11.2006 Dec. 09.02.2007 - TC 0618669 8477.80.00 CUTTERS AND REWINDERS, PLASTIC FILM, programmable logic controlled, having a cutting diameter NOT less than 1 200 mm Op. 05.02.2007 Dec. 30.04.2007 - TC 0701869 8477.80.00 PUNCHERS AND SPLITTERS, DIAGNOSTIC STRIP, programmable logic controlled, having ALL of the following: (a) unwinders and rewinders; (b) splice tables; (c) active web guides; (d) puncher tool die stations; (e) slitter tool die stations; (f) vacuum waste removers Op. 02.03.2007 Dec. 25.05.2007 - TC 0703435 8477.80.00 CUTTING MACHINES, sign, computer controlled Op. 16.11.1987 Dec. 18.04.2007 - TC 0704551 8477.80.00 LINES, EXTRUSION, comprising ALL of the following: (a) extruders; (b) dies; (c) conditioning ovens; (d) conveying benches; (e) shears Op. 02.04.2007 Dec. 22.06.2007 - TC 0704650 8477.80.00 RECYCLERS, THERMOPLASTIC, comprising ALL of the following: (a) agglomerators; (b) dryers; (c) re-crystallisers; (d) compactors Op. 29.03.2007 Dec. 15.06.2007 - TC 0704717 8477.80.00 EXTRUDERS, TWIN SCREW, POLYMER CHIP, programmable logic controlled, having ALL of the following: (a) single volumetric feeders; (b) vacuum modules and pumps; (c) strand pelletisers Op. 22.05.2007 Dec. 10.08.2007 - TC 0707612 8477.80.00 RECYCLING LINE, PLASTIC, comprising ALL of the following: (a) material in-feeders and out-feeders; (b) granulators; (c) pulverisers; (d) screeners; (e) hoppers Op. 18.09.2007 Dec. 30.11.2007 - TC 0715525



8477.80.00 TYRE RETREADING LINE, comprising ALL of the following: (a) peeling and/or buffing machines; (b) grooving machines; (c) rubber extruding machines Op. 10.09.2007 Dec. 02.01.2008 - TC 0720452 8477.80.00 EXPANDER MACHINES, POLYSTYRENE, pressurized, programmable logic controlled Op. 09.01.2008 Dec. 25.03.2008 - TC 0800534 8477.80.00 EXTRUSION LINE, POLYVINYL CHLORIDE(PVC) PROFILE, comprising ALL of the following: (a) twin screw extruder; (b) calibrating tables; (c) tracks; (d) adapters; (e) flanges; (f) leaders; (g) feeders; (h) supports; (i) dosing tubes; (j) screen plates; (k) mounting brackets; (l) filter cartridges; (m) operating manuals; (n) filters; (o) thyristor fuses; (p) signal indicators; (q) melt temperature indicators; (r) melt pressure indicators; (s) thermal/heating elements; (t) heating plugs; (u) downstream voltage supply plugs; (v) downstream control plugs; (w) main switch covers; (x) control cabinet keys; (y) system software; (z) modems; (aa) back up service CDs; (ab) data sticks; (ac) vacuum pumps; (ad) take off galleries; (ae) haul offs; (af) saws; (ag) sawdust exhausters Op. 24.01.2008 Dec. 11.04.2008 - TC 0801293 8477.80.00 PLANT,COMPOUNDING, POLYVINYL CHLORIDE, programmable logic controlled, comprising ALL of the following: (a) de-baggers; (b) weighers; (c) mixers, heating and cooling; (d) feeders or hoppers Op. 14.04.2008 Dec. 04.07.2008 - TC 0804284 8477.80.00 VERTICAL CONTINUOUS VULCANISATION PLASTIC EXTRUSION LINE, comprising ALL of the following: (a) floor pay-offs; (b) tension controls; (c) extruders; (d) cooling units; (e) crossheads; (f) temperature control units; (g) splice boxes;



(h) post heaters; (i) post heater dummies; (j) joints; (k) separators; (l) pulleys; (m) seals; (n) haul off capstans; (o) counters; (p) autocures Op. 27.12.2007 Dec. 25.06.2008 - TC 0805655 8477.80.00 PLASTICS EXTRUSION LINE, comprising ALL of the following: (a) pay-offs; (b) dancers; (c) haul off capstans; (d) guides; (e) conveyors; (f) extruders; (g) crossheads; (h) distributors; (i) pumps; (j) lasers; (k) coolers; (l) dryers; (m) markers; (n) take-ups; (o) cable trays; (p) power supply cabinets Op. 27.12.2007 Dec. 25.06.2008 - TC 0805659 8477.80.00 PLANT, MANUFACTURING, PLASTICS COMPOUNDING, comprising ALL of th following: (a) vacuums; (b) hoppers; (c) feeders; (d) heaters; (e) separators; (f) coolers; (g) valves; (h) hoses; (i) fillers; (j) decanters Op. 18.11.2005 Dec. 03.05.2008 - TC 0805819 8477.80.00 SPLITTING MACHINES, HORIZONTAL, programmable logic controlled Op. 18.09.2008 Dec. 12.12.2008 - TC 0831678 8477.80.00 MILLS, RUBBER AND/OR THERMOPLASTIC, having BOTH of the following: (a) working roll diameter NOT less than 710 mm; (b) working roll length NOT less than 2 200 mm Op. 02.10.2008 Dec. 19.12.2008 - TC 0833811 8477.80.00 LOOP HANDLE CARRIER BAG MAKING LINE, comprising ALL of the following: (a) feeder sections; (b) draw roll assembly; (c) web tension adjuster; (d) servomechanism; (e) servomotor; (f) cut-off length adjuster; (g) operator panel; (h) power control cabinet; (i) half tube assembly; (j) heat sealing station;



(k) unwinding and folding station; (l) roller system capture dancers; (m) foldover and sealing station; (n) gusseter; (o) handle sealer; (p) loop handle station; (q) pre heating station; (r) vacuum belt delivery station; (s) laser pointer; (t) automatic bag folding station Op. 06.06.2008 Dec. 23.10.2008 - TC 0836495 8477.80.00 HOLE PUNCHES, plastic bag, converting type, interchangeable ball and die or saw tooth, air powered, electrically activated Op. 14.04.1994 Dec. 08.08.1994 - TC 9404159 8477.80.00 MIXER, ELASTOMERIC COMPOUNDS, batch, single pass, variable intermeshing clearance Op. 22.01.1996 Dec. 29.04.1996 - TC 9600975 8477.80.00 CUTTERS, ON DEMAND, PLASTIC PROFILES AND TUBING Op. 05.03.1998 Dec. 15.05.1998 - TC 9801980 8477.80.00 EXTRUSION LINES, POLYETHYLENE BLOWN FILM, having ALL of the following: (a) single screw extruder; (b) mono-layer blown film die; (c) air cooling ring; (d) bubble guide and stabiliser; (e) film take off; (f) film winder Op. 25.03.1998 Dec. 06.08.1998 - TC 9806271 8477.80.00 BELLING MACHINES, PLASTIC PIPE, comprising BOTH of the following: (a) 1 OR 2 independent ovens; (b) water cooling OR air cooling Op. 21.04.1999 Dec. 02.07.1999 - TC 9902756 8477.80.00 EXTRUSION LINES, POLYETHYLENE BLOWN FILM, having ALL of the following: (a) three layer co-extrusion; (b) film blowing die head; (c) air ring; (d) film take-off; (e) film winder Op. 06.09.1999 Dec. 19.11.1999 - TC 9906789 8477.80.00 EXTRUSION LINE, THERMOPLASTIC SHEET Op. 12.01.2000 Dec. 14.04.2000 - TC 0000768 8477.80.00 EXTRUSION LINES, PLASTIC PIPE, comprising ALL of the following: (a) twin screw extruder; (b) pipe head; (c) cooling tanks; (d) haul off unit; (e) cut off saw Op. 21.04.1999 Dec. 04.04.2000 - TC 0002422 8477.80.00 BLOWN FILM EXTRUSION LINE, comprising ALL of the following: (a) single screw extruder with die; (b) dual lip cooling ring; (c) internal bubble cooling system; (d) winding station with take-off unit; (e) corona treatment unit



Op. 24.07.1995 Dec. 04.04.2000 - TC 0002424 8477.80.00 PLASTICS EXTRUSION LINE, computer controlled, consisting of ALL of the following: (a) feeder hopper; (b) single screw extruder; (c) lattice basket extrusion dies; (d) vacuum calibrator tanks; (e) spray cooling tanks; (f) caterpillar haul off unit; (g) planetary cut off saw Op. 11.06.1993 Dec. 03.04.2000 - TC 0002428 8477.80.00 BAG MAKING LINES, CHECK-OUT CARRIER BAG, comprising ALL of the following: (a) bag making machine; (b) unwinder; (c) dancer; (d) sealer; (e) gusseter; (f) web aligning control; (g) print register control; (h) handle puncher; (i) stacking station Op. 27.03.2001 Dec. 01.06.2001 - TC 0102681 8477.80.00 POUCH MANUFACTURING MACHINES, computer controlled, having BOTH of the following: (a) sealing width NOT exceeding 800 mm; (b) web width NOT exceeding 1600 mm Op. 29.06.2001 Dec. 14.09.2001 - TC 0105224 8477.80.00 COEXTRUSION LINES, MULTI-LAYER SHEET Op. 04.09.2001 Dec. 23.11.2001 - TC 0107851 8477.80.00 BAG MAKING MACHINES, MULTI-PLY LAMINATED PLASTIC, with resealable zipper and side gusset applicators Op. 03.04.2002 Dec. 21.06.2002 - TC 0202809 8477.80.00 INJECTION AND PLASTICISING MACHINES Op. 05.09.2002 Dec. 18.11.2002 - TC 0208154 8477.80.00 EXTRUSION LINES, WASTE PLASTIC, comprising ALL of the following: (a) extruders; (b) comminuters; (c) extruder dies; (d) water coolers Op. 29.05.2003 Dec. 25.08.2003 - TC 0306466 8477.80.00 MILLING AND EMBEDDING MACHINES Op. 06.08.2003 Dec. 26.11.2003 - TC 0314948 8477.80.00 AGRICULTURAL PIPES, CORRUGATION LINE, comprising ALL of the following: (a) corrugator; (b) spray cooler and water tank; (c) perforator; (d) guillotine Op. 26.08.2004 Dec. 05.11.2004 - TC 0408813



8477.80.00 PELLETISING LINES, comprising ALL of the following: (a) conveyor screw and/or injector blower; (b) pre-crystalliser; (c) extruder; (d) melt filter; (e) under-water and/or strand pelletiser Op. 30.11.2004 Dec. 11.02.2005 - TC 0412877 8477.90 EXTRUDER BARRELS, bimetallic Op. 22.05.1984 Dec. 22.05.1984 - TC 8438880 8477.90 AIR RINGS AND/OR DIE ASSEMBLIES, blow moulder Op. 21.08.1987 Dec. 20.04.1988 - TC 8734489 8477.90 INSERTS, wire guide, diamond tipped Op. 22.12.1987 Dec. 24.06.1988 - TC 8736089 8477.90.00 PLASTIC PACKAGING POUCH MAKING MACHINE EXTENSION ASSEMBLIES, including ALL of the following: (a) hole and shape punches; (b) plastic sheet folders; (c) sealing and cooling bars; (d) sealing and cooling dies; (e) trim winders Op. 28.07.2009 Dec. 23.10.2009 - TC 0927089 8477.90.00 DIES, MANDRELS OR LATTICE BASKET EXTRUSION DIE HEADS, PLASTIC PIPE EXTRUSION, extrusion output of 120 kg/h OR greater Op. 01.01.2007 Dec. 16.11.2006 - TC 0614296 8477.90.00 PARTS FOR EXTRUDERS, cold feed pin barrel type, being ANY of the following: (a) roller hopper feed assemblies; (b) hopper complete with liners; (c) front barrel liners; (d) rear barrel liners; (e) front barrels with liners; (f) rear barrels with liners; (g) locating keys; (h) collars; (i) mixing pins Op. 01.01.2007 Dec. 16.11.2006 - TC 0614297 8477.90.00 PARTS OF EXTRUSION SECTION OF LINEAR LOW DENSITY POLYETHYLENE (LLDPE) SHEET CO-EXTRUSION LINE, being EITHER of the following: (a) stabiliser, consisting of frame and hardened shafts with axial-bearings; (b) screen changers Op. 01.01.2007 Dec. 16.11.2006 - TC 0614298 8477.90.00 PARTS OF MOULDING MACHINES, injection, rubber Op. 01.01.2007 Dec. 16.11.2006 - TC 0614299 8477.90.00 PARTS, EXTRUDING MACHINE, twin screw, being ANY of the following: (a) barrels; (b) screws; (c) extrusion heads; (d) dies; (e) pins Op. 01.01.2007 Dec. 16.11.2006 - TC 0614300



8477.90.00 EXTRUSION DIES, THERMOPLASTIC, multi-layer, having ALL of the following: (a) coat hangar internal profile; (b) adjustable gap opening; (c) 500 mm to 960 mm die mouth; (d) individually heated die zones; (e) cartridge heaters; (f) sheet thickness range 1.2 mm to 3.7 mm (both inclusive) Op. 01.01.2007 Dec. 16.11.2006 - TC 0614301 8477.90.00 PARTS, SINGLE SCREW EXTRUDER of 250 mm diameter OR greater, being ANY of the following: (a) degassing screws; (b) degassing barrels; (c) degassing domes Op. 01.01.2007 Dec. 16.11.2006 - TC 0614302 8477.90.00 DISTRIBUTORS, HOT RUNNER, MOLTEN POLYETHYLENE TEREPHTHALATE (PET) Op. 01.01.2007 Dec. 16.11.2006 - TC 0614303 8477.90.00 PREFORM ASSEMBLIES, INJECTION MOULDING MACHINE, comprising BOTH of the following: (a) moulds; (b) preform mechanical handler and sorter Op. 01.01.2007 Dec. 16.11.2006 - TC 0614304 8477.90.00 INJECTION HEADS, FOOTWEAR, POLYURETHANE SOLE Op. 01.01.2007 Dec. 16.11.2006 - TC 0614305 8477.90.00 PARTS, PREFORM INJECTION MOULDER, being BOTH of the following: (a) moulds (b) preform handlers Op. 01.01.2007 Dec. 07.12.2006 - TC 0614787 8477.90.00 PARTS, PRESSURE THERMOFORMER, being forming and punching tools, having a forming area NOT greater than 760 mm x 565 mm Op. 12.03.2007 Dec. 04.06.2007 - TC 0703749 8477.90.00 PARTS, BLOWN FILM EXTRUDER, being extrusion dies Op. 21.05.2007 Dec. 27.07.2007 - TC 0707561 8477.90.00 PARTS, HOT RUNNER, comprising three OR more of the following: (a) nozzle tip insulators; (b) nozzle tips; (c) nozzle housings; (d) nozzle heaters; (e) valve stems; (f) manifold insulators; (g) thermocouples (manifold); (h) sprue body heater Op. 22.05.2007 Dec. 10.08.2007 - TC 0707641



8477.90.00 PARTS, COLD HALF, PREFORM, POLYETHYLENE TEREPHTHALATE INJECTION MOULDING, being ANY of the following: (a) gibs; (b) wear plates; (c) leader pins; (d) bushings; (e) lock rings; (f) cavities; (g) core plates; (h) cavity plates; (i) stripper plates; (j) blocks Op. 18.07.2007 Dec. 21.09.2007 - TC 0712014 8477.90.00 TOOLING, HOT RUNNER, being domestic refrigerator component dies AND/OR moulds Op. 22.10.2007 Dec. 25.01.2008 - TC 0718003 8477.90.00 PARTS, PLASTICS EXTRUSION LINE, being screen changers Op. 26.11.2007 Dec. 08.02.2008 - TC 0720095 8477.90.00 PARTS, THERMOFORMER, being forming and punching tools having a forming area NOT less than 680 mm x 280 mm Op. 01.01.2007 Dec. 08.10.2008 - TC 0834382

machine tools

Documents

jigsaws b sanders

rotary tools b tool

pipe clamp b

sanders b grinders

drill andor driver b

kn b weight

c battery charger d

w b power output rating