machine tools - francis kirk · 0342-0554 d250 x 550 vario 250 550 stepless 95-3,000 £1,250.00...

Lathes 522

Milling 522-523

Bandsaws 523-525

Hacksaws 525

Mitre Saws 525

Grinders & Polishers 525-529

Drilling Machines 529-531

Pin Vices & Chucks 532

Vices 532-534

Keyless Chucks 535-537

Chucks 537-544

Lathe Chuck Keys 543

Ejecting Drifts 544

Arbors 545-546

Sleeves & Sockets 547-549

Centres 549-555

Collets & Collet Sets 555-556

Lathe Accessories 556-557

Turning 557-558

Milling Accessories 558-559

Toolposts 559

Bandsaw Blades 560

Blades 561-562

Saw Blades 563-566

MACHINE TOOLS

THS07_MT10_P521 29/3/07 12:33 Page 521

http://80.4.177.27/webnative/imageinfo?-id+400121+/Volumes/XRAID/FullPress_Volumes/THS/images/103145_THS%20New%202007/THS_Master/chain_bw.tif

522

LATHES

MILLING

MA

CH

INE

TO

OLS

Light Duty Small Precision Lathes

Max Swing Distance between Nº of Spindle Spindle List PriceCode Model Diameter (mm) Centres (mm) Speeds Speeds (rpm) (exc VAT)

0342-0251 D140 x 250 vario 140 250 Variable 120-3,000 £375.00

0342-0301 D180 x 300 vario 180 300 Variable 150-2,500 £495.00

• CE compliant

• 1 phase variable speed

• Electronic continuous speed regulation withdynamically readjusting control

• DC motor with permanent speed monitoring

• Guaranteed concentricity precision of themain spindle <0.015mm

• Spindle bedding with precision ball bearings

• Feed shaft for threading or automaticstraight turning

• Automatic off-switch for easy operation

Maximum Swing (mm) Distance No of Spindle Over Over In Between Spindle Speeds List Price

Code Model Phase Bed Saddle Gap Centres (mm) Speeds (rpm) (exc VAT)

0340-1000 D330 x 1,000 3 330 198 476 1,000 8 70-2,000 £3,490.00

0340-1006 D330 x 1,000 1 330 198 476 1,000 8 70-2,000 £3,490.00

0340-0626 D320 x 630 1 320 178 430 630 18 65-1,800 £2,490.00

0340-0627 D320 x 630 3 320 178 430 630 18 65-1,800 £2,490.00

0340-0926 D320 x 920 1 320 178 430 920 18 65-1,800 £2,990.00

0340-0927 D320 x 920 3 320 178 430 920 18 65-1,800 £2,990.00

Heavy Duty Precision Lathes

• Manufactured to DIN 8606

• Rigid hardened and ground cast iron bedwith V guideways

• Camlock spindle nose D1-4

• Guaranteed spindle nose runout <0.015mm

• Easy lead screw spindle drive through oilrunning switched geared head

• Forward/reverse spindle switch

• Safety switch with no-volt release,emergency stop and motor protection andfoot brake

0340-0626

0340-1000

0342-0251

Max Swing Distance between Nº of Spindle Spindle List PriceCode Model Diameter (mm) Centres (mm) Speeds Speeds (rpm (exc VAT)

0342-0321 D210 x 400 210 400 6 125-2,000 £595.00

0342-0324 D210 x 400 vario 210 400 Stepless 125-2,000 £795.00

0342-0550 D250 x 550 250 550 6 125-2,000 £775.00

0342-0554 D250 x 550 vario 250 550 Stepless 95-3,000 £1,250.00

Medium Duty Small Precision Lathes

• CE compliant

• Single phase

• Precise chuck run out <0.05mm

• Spindle nose run out <0.009mm

• Automatic slide/lead screw drive

• Rigid induction hardened (HRC 42-52) andground cast iron bed with V guideways

• User friendly safety switch IP54 with no-voltrelease and lockable emergency stop andright/left hand motion

0342-0321

BF20 Vario Optimum Drill/Mill Tilting Head – Variable Speed

• Extremely stable drilling-milling machine fora precise, fast and secure fabrication

• Digital quill travel indicator, precision ofreading 0.01mm

• Metric and imperial conversion

• Automatic off-switch for easy operation,with under voltage circuit breaker, right-lefthand rotation

• High concentricity precision <0.01mmmeasured in the spindle sleeve

• The drill head can be swivelled +/-90º thuspermitting milling and drilling operations inany angular position

Specification:-

• Drilling capacity: 20mm• Maximum milling cap:

of inserted tooth cutter - 63mmof end mill cutter - 16mm

• Spindle speeds: 180-3,200rpm• Spindle holding fixture: 2MT/M10• Spindle travel: 42mm• Travel: Z - 380mm

Y - 175mmX - 280mm

• Table size: 500 x 180mm• Weight: 103Kgs

List Price Code (exc VAT)

0333-8120 £745.00

THS07_MT10_P522-523 28/3/07 09:59 Page 522

523

MILLING

BANDSAWS

MA

CH

INE

TO

OLS

PDM Drill Mills

Capacity (mm) Table movement Face End Table Longitudinal x Weight List Price

Code Phase Type Drilling Mill Mill Size (mm) Cross (mm) (Kg) (exc VAT)

PDM25

1-300-250 1 Imperial 25 75 16 190 x 660 420 x 190 210 £990.00

1-300-250T 3 Imperial 25 75 16 190 x 660 420 x 190 210 £990.00

1-300-251 1 Metric 25 75 16 190 x 660 420 x 190 210 £990.00

1-300-251T 3 Metric 25 75 16 190 x 660 420 x 190 210 £990.00

PDM30

1-300-300 1 Imperial 32 75 20 210 x 750 500 x 175 360 £1,075.00

1-300-300T 3 Imperial 32 75 20 210 x 750 500 x 175 360 £1,075.00

1-300-301 1 Metric 32 75 20 210 x 750 500 x 175 360 £1,075.00

1-300-301T 3 Metric 32 75 20 210 x 750 500 x 175 360 £1,075.00

• 12 spindle speeds: 100–2,080rpm

• Fast and easy speed change and belt tension

• Taper bearings for adjustment against wear

• Stops for table longitudinal movements,head can swivel through 360º

• Positive depth stop enables to control thedepth of cut

• Quill lock stops the movement while inoperation

• R8 Spindle Taper

PDM30

Variable Speed Turret Mills

Spindle Spindle Table Size List PriceCode Model Type Motor Speeds (mm) (exc VAT)

1-199-200 ETM2V R8 2.2Kw (3Hp) 70-4,200 228 x 1,245 £4,990.00

1-199-300 ETM3V R8 2.2Kw (3Hp) 70-4,200 250 x 1,370 £5,490.00

• Versatile machine for drilling, milling andboring

• Dual dials allows work in either metric orimperial calibrations

• Manufactured for accuracy and a long lifefrom high quality materials to closetolerances

• Power fed to quill at three rates

• Hardened slide ways

• Centralised one shot lubrication

• Electrically interlocked spindle guard

• Inclusive of 3 axis DRO x, y axis and z axis

• Alignment of blade through ball bearings

• Adjustable feed through hydraulic system

• Automatic cut off at the end of the cut

• Complete coolant system

Specification:-

• Capacity at 90º: round - 178mmrectangular - 175 x 300mmsquare - 125 x 125mm

• Capacity at 45º: round - 120mmrectangular - 120 x 175mmsquare - 120 x 120mm

• Vice swivels: 45º• Blade size: 2,360 x 19 x 0.9mm• Motor: 1Hp

Medium Duty Bandsaw – PBS180EE

List PriceCode Phase (exc VAT)

1-620-200 3 £725.00

1-620-201 1 £725.00

• Variable speed

• Micro alignment of blade through ballbearings

• Dovetail slide with take up gib

• Rapid approach vice

• Adjustable hydraulic feed

• Automatic cut off

Specification:-

• Capacity at 90º: round - 250mmsquare - 250 x 250mmrectangular - 250 x 415mm

• Capacity at 45º: round - 190mmsquare - 190 x 190mmrectangular - 250 x 190mm

• Blade size: 3,300 x 27 x 0.9mm• Mitre cut: 45º• Motor: 2Hp

Heavy Duty Bandsaw – PBS250V

List PriceCode (exc VAT)

1-625-200V £2,190.00

THS07_MT10_P522-523 28/3/07 09:59 Page 523

524

BANDSAWS

BANDSAWS

MA

CH

INE

TO

OLS

• Suitable for continuous use

• High quality electrics and limit switches toblade wheelcovers make it safe to use andconforms to CE

• Air pipe keeps the visibility clear near thecutting edge

• Saw blade butt welder with intergratedannealing unit

• 1.5Kw drive motor

• 15º table inclination (4 ways)

Heavy Duty Vertical Bandsaw

Throat Size Cutting Blade Blade Length List PriceCode Model (") to Column (mm) (mm) (exc VAT)

1-631-100 KV40 16 410 3,350 £2,990.00

1-631-200 KV50 20 520 3,880 £3,250.00

1-631-300 KV60 24 600 3,970 £3,590.00

1-631-400 KV100 40 1,000 4,540 £3,950.00

• Variable speed with inverter

• Coolant system

• Hydraulic feed

Heavy Duty Twin Column Semi-Auto Bandsaw

• Ideal for single or serial cuts up to 99999

• Automated stop

• Coolant

• Variable speed with inverter

• Roller stand

• No belt change

Specification:-

• Maximum capacity: round - 280mmflat - 280 x 250mmsquare - 270mm

• Blade speed - stepless: 20-100M/min• Blade size: 3,400 x 27 x 0.9mm• Main motor: 2Hp

Fully Automatic Bandsaw – BSA28OV


1-626-300 £4,750

• Saw frame weight is well balanced andcontrols are conveniently located

• Head swivels to 60º

• Quick adjustment swivelling head, barsupport roller and bar stop as standard

• Complete with stand, coolant system andquick acting vice

Pull Down Bandsaw

90º Capacity (mm) 45º Capacity (mm) Main Drive Blade List PriceCode Model Round Flat Square Round Flat Square Motor (Kw) Speed (mm) (exc VAT)

1-627-100 BSS320VTC 320 450 x 320 320 250 250 x 320 250 1.5 4,130 x 27 £5,690.00

1-627-200 BSS350VTC 350 520 x 350 350 270 270 x 350 270 2.2 5,000 x 34 £7,590.00

1-625-300 BSS450VTC 450 650 x 450 450 350 350 x 450 350 3 6,000 x 41 £9,290.00

1-627-400 BSS550VTC 550 750 x 550 550 400 400 x 550 400 4 6,800 x 41 £10,990.00

1-627-500 BSS800VTC 800 850 x 800 800 480 480 x 800 480 4 8,200 x 41 £12,490.00

1-627-600 BSS1,100VTC 1,100 1,100 x 1,300 1,100 820 820 x 1,100 820 7.5 1,200 x 67 £27,325.00

Capacity at 90º (mm) Capacity at 45º( mm) List PriceCode Model Description Round Rectangular Round Rectangular Motor (exc VAT)

Medium Duty

1-660-000 BSP170 3 phase, 2 speed 170 170 x 210 120 110 x 110 3⁄4Hp £875.00

1-660-001 BSP170 1 phase, single speed 170 170 x 210 120 110 x 110 1⁄2Hp £875.00

Heavy Duty

1-660-100 BSP227 3 phase, 2 speed 227 210 x 260 150 145 x 145 1.5Hp 4⁄8P £1,395.00

1-660-101 BSP227 1 phase, single speed 227 210 x 260 150 145 x 145 1.5Hp 4P £1,395.00

1-660-200 BSP270 3 phase, 2 speed 270 220 x 330 200 200 x 200 2Hp 4⁄8P £2,350.00

BSS450VTC

BSP227

• Built-in coolant system

• Hydraulic feed rate selector

• Worm gear drive

• Wheel mounted for easy movement

Specification:-

• Blade length: 2362mm• 4 speeds: 72, 110, 148, 217 ft/min

12" Metal Cutting Bandsaw

SSP Code (exc VAT)

07786 (1 phase) £879.92

07749 (3 phase) £879.92

THS07_MT10_P524-525 28/3/07 09:59 Page 524

525

HACKSAWS & MITRE SAWS

MA

CH

INE

TO

OLSBANDSAWS

350w 230v Horizontal & Vertical Metal Cutting Bandsaw

• 3 speed machine for use in the maintenanceworkshop

• Smooth and accurate saw bladetransmission through the adjustable ballbearing guides

• No-volt overload safety switch

• Complete with transport wheels, tool shelf,plastic blade guards, BS safety regulationguard, push button on/off switch, BSapproved non-rewireable 3 pin mouldedplug and cable

Specification:-

• Cutting capacity: 114mm round,100 x 150mm rectangular

• Blade length: 1,638mm• Vertical table: 254 x 250mm• Height to bed: 591mm• Height to table: 851mm• 3 x Speeds: 65, 95, 165rpm• Weight: 61Kg

List Price Code Model (exc VAT)

30736 MBS46A £301.36

Heavy Duty Hydraulic Hacksaw

• Complete hydraulic system

• Infinitely variable saw feed pressure control

• Re-circulating coolant system

• Clamping device for short ends

• Nesting fixture for multiple sawing ofstacked bars, small rounds and tubing

90º Capacity (mm) 45º Capacity (mm) Blade Main Motor List PriceCode Model Round Square Round Square (mm) (Hp) (exc VAT)

1-610-100 KP200 200 190 x 200 90 190 x 90 350 x 32 1 £2,490.00

1-610-200 KP225 225 240 x 210 120 210 x 210 400 x 32 2 £2,990.00

1-610-300 KP280 280 250 x 250 130 250 x 130 450 x 32 2 £3,290.00

1-610-400 KP320 320 300 x 300 140 300 x 140 500 x 38 2 £3,790.00

1-610-500 KP380 380 350 x 330 150 350 x 150 550 x 45 2 £4,490.00

1-610-600 KP450 450 430 x 400 160 430 x 160 650 x 50 3 £7,990.00

KP200

• Hard metal and ball bearing guide

• High cutting accuracy

• Automatic switch off after termintationof cutting

• Coolant system with additional partswash pistol

• Material limit stop with scaling

Specification:-

• Capacity at 0º: Round - 254mmRectangular - 76 x458mmSquare - 254 x 254mm

• Capacity at +/-45º: Round - 254mmRectangular - 254 x 280mmSquare - 254 x 254mm

• Capacity at -60º: Round - 204mmRectangular - 127 x 204mmSquare - 178 x 178mm

• Motor power 415v: 1.5Kw• Blade speed continuous: 25-100M/min• Blade size: 3,350 x 27 x 0.9mm

Mitre Saw – Swivelling Head – S 300VG


0329-0300 £2,790.00

GRINDERS & POLISHERS

Opti Belt Grinders

Power Grinding Rest Sanding Belt List PriceCode Model (Kw) (mm) Size (mm) (exc VAT)

0332-1075 BSM 75 3 75 x 575 75 x 2,000 £450.00

0332-1150 BSM 150 4 150 x 575 150 x 2,000 £590.00

• 400v/3phase

• Vibration free run by rubberised drive andguide rollers

• Grinding table 15º-30º inclinable

• Time-saving deburring of edges, cleaningwelding seams

• High belt rotation speed of 2,800rpm30M/sec

• User friendly sanding belt change, fast anduncomplicatedly

• Standard 2 suction nozzles for connection toan extractor

THS07_MT10_P524-525 28/3/07 09:59 25

526

GRINDERS & POLISHERSM

AC

HIN

E TO

OLS

• 6 x 18"

• Manually Operated

• Robust cast iron construction

• Easy and quick to set up which saves time

• Precision built for accuracy

• Ball bearing ways for superior finish

• One shot lubricaion

Economic Surface Grinder – ESG 618E


1-500-100 £2,990.00

• Sealed and pre-lubricated ball bearings

• Balanced motor for smooth operation

• Adjustable spark detectors for safety

• Adjustable shatter-proof eye shields

• Thick wheel guards with built in dust chutes (except 6")

• 10" and 12" grinders have wheel balancing weight

Industrial Bench Grinders

Size Voltage/ Motor Wheel Wheel Dimensions List PriceCode Model (") Phase (Hp) Speed (rpm) (ø x Bore x Width mm) (exc VAT)

1-530-200 GRB 201 6 240/1 1⁄2 2,900 150 x 12.7 x 19 £75.00

1-530-201 GRB 201 6 110/1 1⁄2 2,900 150 x 12.7 x 19 £75.00

1-530-300 GRB 202 8 240/1 3⁄4 2,900 205 x 20 x 25 £150.00

1-530-301 GRB 202 8 110/1 3⁄4 2,900 205 x 20 x 25 £150.00

1-530-303 GRB 202 8 415/3 3⁄4 2,900 205 x 20 x 25 £150.00

1-530-400 GRB 203 10 415/3 11⁄2 1,450 255 x 25.4 x 38 £275.00

1-530-500 GRB 204 12 415/3 2 1,450 305 x 25.4 x 50 £440.00

List PriceCode Description (exc VAT)

Accessories

1-531-100 Stand to suit 6" A and 8" A £80.00

1-531-200 Stand to suit 10" C £90.00

1-531-300 Stand to suite 12" D £100.00

1-532-100 Gravity fed dust collector DC1 £60.00

Image shown with stand and

dust collector

• Heavy, long life type with maintenance freemotor for permanent use

• Housing made of die cast aluminium

• Magnetic switch with lockable emergencystop function

• Balanced rotor with quality ball bearingsensures long service life with very smoothrunning

• Stable, adjustable workpiece rest

• Continuous speed regulations

• Exact repeating accuracy


• Wide grinding range of twist drill from 3 to20mm

• Angle adjustment for all twist drill types

Specification:-

• Grind stone external: 40mm• Continuous speed: 1,400 – 7,600rpm

• Bit grinding angle: 90º - 150º• Grinding cap diameter: 3 – 20mm• Motor: 500w• Voltage: 240v• Dimensions (L x W x H): 225 x 490 x 240mm• Weight: 26.7Kg

Optimum Bench Grinders

Wheel Size Motor Speed Weight List PriceCode Model Voltage/Phase Power (mm) (rpm) (Kg) (exc VAT)

0310-1815 QSM 150 240 / 1 400w 150 x 20 x 16 2,850 11 £49.00

0310-1814 QSM 150 110 / 1 11w 150 x 20 x 16 2,850 11 £49.00

0310-1175 SM 175 240 / 1 450w 175 x 25 x 32 2,850 14 £70.00

0310-1176 SM 175 110 / 1 450w 175 x 25 x 32 2,850 14 £70.00

0310-1200 SM 200 240 / 1 600w 200 x 30 x 32 2,850 16 £95.00

0310-1202 SM 200 110 / 1 600w 200 x 30 x 32 2,850 16 £95.00

0310-1203 SM 200 415 / 3 600w 200 x 30 x 32 2,850 16 £95.00

0310-1253 SM 250 415 / 3 1.5Kw 542 x 304 x 365 2,850 39 £150.00

0310-1255 SM 250 415 / 3 1.5Kw 250 x 40 x 32 800-3,000 45 £675.00

Drill Grinder – DG20


0310-0020 £399.00

THS07_MT10_P526-527 28/3/07 10:01 Page 526

527


AC

HIN

E TO

OLS

• Quality DIY machine

• A compact machine with one 150mmgrinding wheel, 50 x 686mm sanding belt,work light, dust extraction for sandingfacility, adjustable eye protection shield,spark deflector, wheel guard and tools rest

• Complete with 1 fine and 1 coarse grindingwheel, 80 grit sanding belt, grinding wheeldresser and storage tray and fitted with aBS approved non-rewireable 3 pin mouldedplug and cable

Specification:-

• Grinding wheel: 150mm diameter• Bore size: 12.7mm• Sanding belt size: 50 x 686mm (2" x 27")• Speed: 2,850rpm• Machine dimensions: 285 x 190 x 190mm• Weight: 11.5Kg

150mm 370w 230v Bench Grinder with Sanding Belt & Work Light

230v Bench Grinder with Work Light

Adjustable Bench Grinder Stand

List Price Code Part No (exc VAT)

66096 GHD155SB £81.98

• Designed for the workshop to hone andgrind hand and garden tools

• With a vertical whetstone honing wheel, drygrinding wheel, eye protection shield, sparkdeflectors, wheel guards and adjustable toolrests

• Uses dry grinding wheel especially suitablefor high speed steel tooling

• Fitted with a BS approved non-rewireable3 pin moulded plug and cable

Specification:-

• Whetstone wheel diameter: 200mm• Whetstone wheel bore: 20mm• Whetstone wheel speed: 134rpm• Dry stone wheel diameter: 150mm• Dry stone wheel bore: 12.7mm• Dry white stone wheel speed: 2,950rpm• Weight: 10Kg

List Price Code Part No Description (exc VAT)

78456 GWD200A Bench grinder £54.32

79016 AG200W Whetstone wheel £6.14

29630 AG150C Coarse grit wheel £8.32

• A compact machine with work light

• One coarse and one fine grinding wheel,adjustable eye protection shields, sparkdeflectors, wheel guards and tools rests

• Supplied with grinding wheel dresser andstorage tray and fitted with a BS approvednon-rewireable 3 pin moulded plug andcable

Grinding Bore MachineWheel Ø Motor Size Speed Dimensions Weight List Price

Code Part No (mm) (w) (mm) (rpm) (L x H x D) (Kg) (exc VAT)

64715 GHD151L 150 370 12.7 2850 285 x 190 x 190 11.5 £73.10

64716* GHD201L 220 550 16 2850 420 x 245 x 360 20 £108.64

* Heavy Duty64716

• Sturdy bench grinder stand with floormounting holes and adjustable height from700 to 900mm

• The grinder fixing platform measures228 x 198mm and will accept DraperGrinder Models GHD200, GHD151L andGHD201L and other manufacturerssimilar machines

• Supplied flat packed for self assembly,complete with 2 hexagon keys


69356 AG101 £71.90

250w 230v Wet & Dry Bench Grinder



• CE compliant

• Heavy duty industrial type with maintenancefree motor

• Housing made of aluminium die casting

• Balanced rotor with quality ball bearingsensures long service life with very smoothrunning


Optimum Polishers

Voltage/ Motor Wheel Size Motor Speed List PriceCode Model Phase Power (mm) (rpm) (exc VAT)

0310-1320 PSM 200 240 / 1 600w 200 x 25 x 20 2,850 £150.00

0310-1323 PSM 200 415 / 3 600w 200 x 25 x 20 2,850 £150.00

0310-1325 PSM 250 415 / 3 1.5kw 250 x 30 x 20 2,850 £195.00

THS07_MT10_P526-527 28/3/07 10:01 Page 527

RPBG6

RPBG8

SCAN150

SCAN200

SCAN200S

528


AC

HIN

E TO

OLS

Size List Price Code (") (exc VAT)

RPBG6 6 £34.03

RPBG8 8 £42.54

Size List Price Code (mm/") (exc VAT)

SCAN150 150/6 £93.61

SCAN200 200/8 £101.28

SCAN200S 200/8 £109.79

• Comes with a 5 Year guarantee

• 6" bench grinder

• Induction motor ensures smooth running

• Adjustable tool rest

• 40mm wide whitestone for fine grinding

• 25mm wide greystone for coarse grinding

• 370w induction motor

Bench Grinders

Bench Grinder RPBG6

• Comes with a 5 Year guarantee

• 8" bench grinder

• Induction motor ensures smooth running

• Adjustable tool rest

• 40mm wide whitestone for fine grinding

• 25mm wide greystone for coarse grinding

• 500w induction motor for more frequentuse and powerful operation

Bench Grinder RPBG8

• Water cooled grinding to reduce heat andprolong tool life

• Grind stone runs in both directions

• Double insulated electrics

• Free angle finder included

Wetstone Grinder SCAN150

All the features of the SCAN150 plus:

• Features 200mm grinding disc

• Non slip feet

Wetstone Grinder SCAN200

All the features of the SCAN150 plus

• Additional stone for polishing to a mirrorlike finish

Wetstone Grinder SCAN200S

Wetstone Grinders

FOR DETAILS ON

WHEEL DRESSERS & CUTTERS,PLEASE CONTACT

THE SALES OFFICE

THS07_MT10_P528-529 29/3/07 15:01 Page 528


529

MA

CH

INE

TO

OLS

• A heavy duty machine designed forintermittent use

• Designed to be used on a bench next tothe cutting or milling machines producingthe burrs

• Contains 1 x deburring wheel 7S fine 150 x25 x 25.4mm and 1 x deburring wheel 9Sfine 152 x 25 x 25.4mm and a Sealey benchgrinder

Scotch-Brite™ EXL Wheel Deburring Machine and Wheels

• A heavy duty machine designed forintermittent use

• Contains 1 x radial bristle brush type C P120150 x 12 x 25.4mm and 1 x EX3 deburringwheel 9S fine 152 x 25 x 25.4mm and aSealey bench grinder

Bristle Bench Motor Machine and Consumables

Maximum Orbital List Price Code Voltage Hp Speed (rpm) (exc VAT)

BG150XD 230 1⁄2" 2,850 £125.00

Maximum Orbital List Price Code Voltage Hp Speed (rpm) (exc VAT)

BM2 230 1⁄2" 2,850 £125.00

List PriceEach

Code Size (mm) Grade (exc VAT)

18762 152 x 25.4 DB-WL 9 SFN £45.77

DB-WL 9 SFN EXL Deburring Wheel

• For larger burrs

• Harder and a slightly coarser finish than the7S Fine

List PriceEach


18768 152 x 25.4 DB-WL 7 SFN £39.62

DB-WL 7 SFN EXL Deburring Wheel

• Ideal for light burrs

• Comfortable and will give when pressure is applied

List PriceEach


30214 150 x 12 x 25.4 X3-WL 9 SFN £29.75

X3-WL 9 SFN EX3 Deburring Wheel

• The latest deburring wheel from 3M

• Offering considerably longer life andimproved performance over the standard

• An excellent product for customers who areaccurately measuring the value of theproducts used

List PriceEach

Code Grade (exc VAT)

33212 Type C P120 £40.15

Radial Bristle Brush BB-2B

• Ideal for cleaning, finishing and lightdeburring in metal fabrication, casting andforging, wood and jewellery applications

30214

33212

DRILLING MACHINES

• 16 speed

• Fitted with NVR switch

• Aluminium motor housing

• Integral light

• 2 year motor warranty

• Floor mounted

Specification:-

• Chuck diameter: 16mm• Spindle taper: MT2• Speed range: 190-3000rpm

240v F16-16L 3/4" Hp Floor Standing Pillar Drill

SSP Code (H x L x W) mm (exc VAT)

01378 1430 x 510 x 256 £247.92

THS07_MT10_P528-529 28/3/07 10:02 Page 529

530

DRILLING MACHINESM

AC

HIN

E TO

OLS

• VDE no-volt switch

• Powerful and efficient smooth runningoperation giving total flexibility for drillinghard and soft material

• Large adjustable tilting table complete withrise and fall rack and pinion


16 Speed 230v Bench Mounted Drill


63220 GD16/16C Drill £224.40

63221* HD19/16C Drill £320.50

65963 YCG55 Chuck guard for 63220 £20.50

65965 YCG74 Chuck guard for 63221 £41.00

65972 YCG Geared chuck £23.56

* Fitted with sealed bearings as standard

Code Part No Code Part No63220 GD16/16C 63221* HD19/16C

Power (w) 375 560

Drilling capacity (mm) 16 19

Chuck capacity (mm) 16 16

Collar diameter (mm) 55 74

Spindle taper (mm) MT2 MT3

Speeds (rpm) 16 (190 - 2685) 16 (190 - 2900)

Swing (mm) 335 430

Spindle travel (mm) 80 85

Column diameter (mm) 73 80

Table Diameter 290 350

Throat depth 140 178

Base size 435 x 260 480 x 270

Height 970 1070

Net/Gross weight 54/57 70/75

• VDE no-volt switch

• Powerful and efficient smooth runningoperation giving total flexibility for drillinghard and soft material

• Large adjustable tilting table (63275 circular)complete with rise and fall rack and pinion


230v Floor Standing Pillar Drills


65863 HD25/12CF Drill £650.60

63275* HD19/16CF Drill £328.00

65965 YCG74 Chuck guard £41.00

65972 YCG Geared guard £23.56

* Fitted with sealed bearings as standard

Code Part No Code Part No65863 HD25/12CF 63275* HD19/16CF

Power (w) 1125 560

Drilling capacity (mm) 25 19

Chuck capacity (mm) 16 16

Collar diameter (mm) 74 74

Spindle taper (mm) MT3 MT3

Speeds (rpm) 12 (150 - 3490) 16 (190 - 2900)

Swing (mm) 560 430

Spindle travel (mm) 119 85

Column diameter (mm) 92 72

Table Diameter 475 x 410 350

Throat depth 243 178

Base size 500 x 580 490 x 290

Height 1770 1625

Net/Gross weight 130 80/85

63220

63221

65863

63275

THS07_MT10_P530-531 28/3/07 12:57 Page 530

531

DRILLING MACHINESM

AC

HIN

E TO

OLS

Optimum Pillar Drills

Voltage/ Capacity in Number of Spindle speed List PriceCode Model Phase Power steel (mm) speeds range (rpm) (exc VAT)

Bench Mounted

0300-3171 B17 Pro 240 / 1 500w 23 5 500-2,520 £169.00

0300-3231 B23 Pro 240 / 1 750w 25 12 200-2,440 £269.00

0300-3233 B23 Pro 415 / 3 750w 25 12 200-2,440 £269.00

Floor Mounted

0300-3261 B26 Pro 240 / 1 750w 25 12 200-2,400 £310.00

0300-3263 B26 Pro 415 / 3 750w 25 12 200-2,400 £310.00

0300-3331 B33 Pro 240 / 1 1.1Kw 30 9 120-1,810 £575.00

0300-3333 B33 Pro 415 / 3 1.1Kw 30 9 120-1,810 £575.00 Opti B33

• 850w

• Guaranteed concentricity precision less than0.015mm measured in the drilling spindlesleeve

• Spindle with precision ball bearings

• Toothed rack for vertical adjustment of thedrilling table

• Drill depth stop

• Drilling table swivels 360º

• User friendly safety switch (IP 54 compliant)with low voltage circuit breaker andemergency stop switch

• One-piece spindle sleeve feed handle in diecast aluminium with soft grip handles

• The floor mounted model has a built in drillejecting device

Heavy Duty Pillar Drills

B28H

Capacity in Number of Spindle Speed List PriceCode Model Phase Steel (mm) Spindle Speeds Range (rpm) (exc VAT)

Bench Mounted

0302-0241 B24 H 1 23 7 350-4,000-1 £525.00

0302-0243 B24 H 3 23 7 350-4,000-1 £525.00

Floor Mounted

0302-0281 B28 H 1 28 16 120-4,000-1 £690.00

0302-0283 B28 H 3 28 16 120-4,000-1 £690.00

• Guaranteed concentricity precision less than0.02mm measured in the drilling spindlesleeve

• Spindle with precision ball bearings

• Röhm quick-action drill chuck supplied as standard

• Swivel of -45º to 45º and rotating capacityof 360º (except 0300-3171)

• Drill depth stop

• Automatic switch-off for easy operationwith under voltage circuit breaker andlockable emergency stop switch

• 3 phase models have an additional camcontroller for left and right hand operation

DRILLING MACHINES

Drilling Machines DP58B and DP58P

• Steel and cast iron construction

• Induction motor

• Headstock made from a large casting to giverigidity and absorb vibration

• Ergonomically designed hand-wheel cast inone piece

• Twelve speed easy operation pulley system

• Suitable for drilling metal and wood

• Both DP58 drilling machines have a 12speed pulley system, the belts are easilymoved using a cam-lever mechanism

• Tilting table feature with measurementguide for drilling angles

• Available in Bench or Floorstanding versions

Specification DP58B:-

• Dimensions: (H x W x D) 990 x 270 x 563mm

• Spindle to column: 165mm • Spindle travel: 80mm• Chuck to table max: 371mm • Chuck to base: 548mm• Chuck included: No2 M/T x 16mm• Motor power: 3/4Hp• Weight: 55Kg

Specification DP58P:-

• Dimensions: (H x W x D) 1635 x 365 x 610mm

• Spindle to column: 190mm • Spindle travel: 80mm• Chuck to table max: 668mm • Chuck to base: 1,154mm• Chuck included: No2 M/T x 16mm• Motor power: 1Hp• Weight: 67Kg

DP58P

Chuck List Price Code Description Size (") (exc VAT)

DP58B Bench mounted 3⁄4 £195.74

DP58P Floorstanding pedestal 3⁄4 £246.80

THS07_MT10_P530-531 28/3/07 10:03 Page 531

VICES

532

VICES

VICES

MA

CH

INE

TO

OLS

• High precision machine vice with totallyenclosed lead screw

• Moveable jaw does not lift up under force

• Base is graduated through 360°

Angle Lock Vices

Jaw Width x Opening List PriceCode Model x Height (mm) (exc VAT)

3-106-100 ALV4 102 x 102 x 32 £120.00

3-106-200 ALV6 152 x 152 x 44 £190.00

3-106-200X ALV6X 152 x 190 x 42 £200.00

3-106-300 ALV8 203 x 218 x 56 £315.00

• Ideally suited for angle milling

• Totally enclosed screw

• Swivel base graduated through 360°

• Vice tilts through 45°

• Heavy duty construction

Swivelling and Tilting Vices

Jaw Jaw MaximumWidth Opening Opening List Price

Code Model (mm) (mm) (mm) (exc VAT)

3-120-100 STV 100 100 32 80 £140.00

3-120-200 STV 125 125 40 100 £170.00

3-120-300 STV 160 160 50 125 £220.00

Drill Press Vice

• DPV3 3" Drill Press Vice capable of holdingwork pieces up to 51mm wide



Size Holding List Price Code (") Capacity (") (exc VAT)

DPV3 3 21⁄2 £7.65

DPV4 4 3 £9.35

DPV5 5 41⁄2 £14.46

Jaw Width Vice Opening List PriceCode (mm) (mm) (exc VAT)

E60-80 80 65 £31.35

E60-100 100 87 £33.40

E60-120 120 110 £53.95

E60-150 150 150 £83.70

Drill Press Vices

• Cast Iron Body

• Prismatic hardened and ground jaws

• Fixed prismatic jaw, 3 vertical and 1horizontal

PIN VICES AND CHUCKS

• Hand held tools designed for holding round materials

Pin Vices and Chucks

Size List Price Code (mm) (") (exc VAT)

Pin Vice Set

1 x 120 , 121, 122, 123 and 124 £39.59

Pin Chuck

160 65 29⁄16 £22.61


Pin Vices

121 75 3 £8.37

122 85 311⁄32 £8.92

123 95 33⁄4 £9.58

124 105 41⁄8 £13.23

160

121 122

123124

DPV3

THS07_MT10_P532-533 28/3/07 10:04 Page 532

VICES

533

MA

CH

INE

TO

OLS

• Cast metal body

• Stationary jaw with 3 vertical and 1 horizontal prism

• Both jaws with flat contact areas forgripping flat workpieces

Drilling Vice

Jaw Clamping List Price Code Size Width (mm) Range (mm) (exc VAT)

863421 1 85 65 £48.00

• Solid body is hardened and ground on all sides

• Long clamping slide with clutch

• Drive spindle with clamping force presetting

RKE Machine Vice for CNC Machines


158323 3 125 0-216 £1,941.80

• Modern design with components madefrom special cast metal

• SGN reversible clamping jaws, one sidesmooth, the other grooved

• Can be used with swivel plate

• Mechanical clamping system

• Hardened steel body (60 HRC)

• Repeating accuracy 0.02mm

• Complete with hand cramp and workpastlocator

RS Machine Vice for Standard Machines


128032 2 113 0-105 £295.80

128034 4 160 0-145 £477.50

Jaw Capacity List PriceCode Model Description Width (mm) (mm) (exc VAT)

161828 MSR 125 Size 1 MSR modular vice 125 150 £446.30




MSR Machine Vices

RV Machine Vices

RV 100


RV 100 RV100 RV 100 machine vice 100 On swivel base 0-100 capacity £250.00



• Swivelling jaw with 4 different clamping surfaces, to clamp asymetrical workpieces

MVC Machine Vices

MVC100


18990 MVC100 MVC 100 aluminium vice 100 Clamping system 0-120 capacity £795.00

• Double clamping system

• Jaws can be changed in less than a minute

• Base manufactured from H30 hard anodisedaluminium

VICES

Jaw Width Maximum List PriceCode (mm) Opening (mm) (exc VAT)

7-270-063 63 50 £128.48

7-270-080 80 63 £155.74

7-270-100 100 80 £207.13

Toolmakers & Inspection Vices with V-Groove Jaw

THS07_MT10_P532-533 28/3/07 12:58 Page 533

534

VICESM

AC

HIN

E TO

OLS


7-257-100 100 160 £488.57

7-257-125 125 160 £580.67

7-257-150 150 210 £787.58

7-257-154 150 260 £856.99

7-257-200 200 260 £1,078.59

7-257-205 200 310 £1,107.95

Precision Module Vices

• Designed for precision grinding and milling

• Widely used with CNC and standardmachines

• Made from high grade alloy steel stabilisedand hardened

Accuracy:-

• Parallelism of bed of vice to base0.02/100mm

• Perpendicular accuracy of fixed jaw to bedof vice 0.03/100mm

• Parallelism of fixed jaw to bolt slots0.02/100mm

Jaw Width Maximum List PriceCode (mm) Opening (mm) Base (exc VAT)

7-221-100 105 75 Fixed £256.96

7-221-160 155 165 Fixed £379.33

7-221-160S 155 125 Fixed £354.86

7-221-200 210 205 Fixed £587.35

7-222-100 105 75 Swivel £330.99

7-222-160 155 165 Swivel £495.57

7-222-160S 155 125 Swivel £471.10

7-222-200 210 205 Swivel £746.42

Precision Machine Vices

• 7-221-160S & 7-222-160S are suitable forBridgeport machines

Accuracy:-

• Parallelism of bed of vice to base0.02/100mm

• Perpendicular accuracy of fixed jaw to base0.04/100mm

• Parallelism of fixed jaw to bolt slots0.03/100mm

• Parallelism of top surface of fixed jaw tobase 0.02/100mm

• Flatness of base 0.03mm


7-209-100 100 80 £138.89

7-209-125 125 100 £170.94

7-209-160 160 125 £231.27

7-209-200 200 160 £327.93

7-209-250 250 200 £567.77

Fixed Milling Machine Vices

• Also available with swivel base


7-207-085 83 45 £55.19

7-207-100 100 73 £80.32

7-207-120 120 93 £93.48

Drill Press Vices

• Handle mounted on ball bearings

THS07_MT10_P534-535 28/3/07 10:05 Page 534

KEYLESS CHUCKS

535

MA

CH

INE

TO

OLS

• Accuracy 0.04mm maximum

Drilling List PriceCode Capacity (mm) Mount (exc VAT)

MP03J0 0.3-3 JACOBS 0 £72.00

MP03J1 0.3-3 JACOBS 1 £72.00

MP06J1 0.3-6 JACOBS 1 £75.00

MP06B12 0.3-6 DIN B12 £75.00

MP08J2 0.3-8 JACOBS 2 £78.00

MP08B12 0.3-8 DIN B12 £78.00

MP10J2 0.5-10 JACOBS 2 £82.00

MP10J33 0.5-10 JACOBS 33 £82.00

MP10B12 0.5-10 DIN B12 £82.00

MP10B16 0.5-10 DIN B16 £82.00

MP13J6 1-13 JACOBS 6 £92.00

MP13J2 1-13 JACOBS 2 £92.00

MP13J33 1-13 JACOBS 33 £92.00

MP13B16 1-13 DIN B16 £92.00

MP16J6 3-16 JACOBS 6 £105.00

MP16J33 3-16 JACOBS 33 £105.00

MP16B16 3-16 DIN B16 £105.00

MP16B18 3-16 DIN B18 £105.00

Drilling Integral List PriceCode Capacity (mm) Shank (exc VAT)

MT08MT2 0.3-8 2 Morse Taper £85.00

MT10MT2 0.5-10 2 Morse Taper £90.00

MT13MT2 1-13 2 Morse Taper £100.00


MT13R8 1-13 R8 Bridgeport £120.00




MT16R8 3-16 R8 Bridgeport £131.00

Precision Grade Keyless Chucks

Albrecht Precision Keyless Chucks

DrillingCapacity List Price

Code (mm) Mount (exc VAT)

130MK2 1-13 INTEGRAL 2MT £114.20

130MK3 1-13 INTEGRAL 3MT £115.30

130MK4 1-13 INTEGRAL 4MT £121.70

130R8 1-13 INTEGRAL R8 BRIDGEPORT £134.20

160MK2 3-16 INTEGRAL 2MT £128.20

160MK3 3-16 INTEGRAL 3MT £129.30

160MK4 3-16 INTEGRAL 4MT £135.70

160R8 3-16 INTEGRAL R8 BRIDGEPORT £146.20

DrillingCapacity List Price

Code (mm) Mount (exc VAT)

15J0 0-1.15 JACOBS 0 £92.70

30J0 0-3 JACOBS 0 £76.20

30J1 0-3 JACOBS 1 £76.20

50J1 0-5 JACOBS 1 £78.00

65J1 0-6.5 JACOBS 1 £82.80

80J2 0-8 JACOBS 2 £87.00

100J2 0-10 JACOBS 2 £92.00

100J33 0-10 JACOBS 33 £92.00

130J6 1-13 JACOBS 6 £102.70

130J2 1-13 JACOBS 2 £102.70

130J33 1-13 JACOBS 33 £102.70

160J6 3-16 JACOBS 6 £115.90


Drilling Sleeve Diameter Length Length List PriceCode Capacity (mm) Mount (mm) Open (mm) Closed (mm) (exc VAT)

PS34J1 0.5-8 JACOBS 1 34 61 69 £58.00

PS34J2 0.5-8 JACOBS 2 34 61 69 £58.00

PS34B10 0.5-8 DIN B10 34 61 69 £58.00

PS34B12 0.5-8 DIN B12 34 61 69 £58.00

PS36J2 0.5-10 JACOBS 2 43 80 92 £62.00

PS36J33 0.5-10 JACOBS 33 43 80 92 £62.00

PS36B16 0.5-10 DIN B16 43 80 92 £62.00

PS38J6 1-13 JACOBS 6 50.5 92 103 £72.00

PS38J2 1-13 JACOBS 2 50.5 92 103 £72.00

PS38J33 1-13 JACOBS 33 50.5 92 103 £72.00

PS38B16 1-13 DIN B16 50.5 92 103 £72.00

PS40J6 3-16 JACOBS 6 57 95 108 £85.00

PS40B16 3-16 DIN B16 57 95 108 £85.00

PS40B18 3-16 DIN B18 57 95 108 £85.00

Industrial Grade – High Accuracy Keyless Chucks


THS07_MT10_P534-535 28/3/07 10:05 Page 535

536

KEYLESS CHUCKSM

AC

HIN

E TO

OLS

KEYLESS CHUCKS

• With clamping force safety device • Especially for percussion drilling machinesand machines with a higher naturalfrequence

Type 141 SUPRA Keyless Chucks

Capacity External Length Length List PriceCode Size (mm) Mount Diameter (mm) Opened (mm) Closed (mm) (exc VAT)

249925 SK10S 0.5-10 1⁄2"-20 35.8 78 84.4 £55.70

305188 SK10S 0.5-10 B12 35.8 78 84.4 £52.60

020039 13 01-13 B16 46 94 102.5 £61.40

020105 13 01-13 J2 46 91.5 100 £61.40

020113 13 01-13 J6 46 94 102.5 £61.40

020167 13 01-13 1⁄2"-20 46 95 103.5 £61.40

020171 13 01-13 5⁄8"-16 46 95 103.5 £61.40

044270 13S 01-13 B16* 42.5 85 93.3 £54.50

044274 13S 01-13 1/2"-20 42.5 81.5 89.8 £54.50

078472 13S 01-13 B12 42.5 82 90.3 £54.50

096455 13S 01-13 3⁄8"-24 42.5 81.5 89.8 £54.50

215061 13S 01-13 J2 42.5 85 93.3 £61.40

249804 SK13S 01-13 1⁄2"-20 42.5 74 83.3 £63.50

305203 SK13S 01-13 B16* 42.5 80.5 89.8 £63.50

305221 SK13S 01-13 B12 42.5 75.3 84.6 £63.50

033733 F13 01-13 B16 46 103.5 103.5 £72.40

020050 16 03-16 B16 51 96.5 106.8 £71.70

020061 16 03-16 B18* 51 96.5 106.8 £71.70

020121 16 03-16 J6 51 96.5 106.8 £71.70

020175 16 03-16 5⁄8"-16 51 97.5 107.8 £71.70

215062 16S 03-16 B16 46 97.5 106 £64.00

215063 16S 03-16 B18* 46 97.5 106 £64.00

215064 16S 03-16 J2 46 95 103.5 £64.00

215065 16S 03-16 J33 46 97.5 106 £64.00

215066 16S 03-16 J6 46 97.5 106 £64.00

215067 16S 03-16 1⁄2"-20 46 95 103.5 £64.00

Industrial Grade Keyless Chucks

Drilling Sleeve Diameter Length Length List PriceCode Capacity (mm) Mount (mm) Open (mm) Closed (mm) (exc VAT)

32J1 0.5-6 JACOBS 1 34 61 68 £28.00

32F38 0.5-6 3/8 x 24 thd 34 61 68 £28.00

34J1 0.5-8 JACOBS 1 34 61 68 £28.00

34J2 0.5-8 JACOBS 2 34 61 68 £28.00

34B10 0.5-8 DIN B10 34 61 68 £28.00

34B12 0.5-8 DIN B12 34 61 68 £28.00

34F38 0.5-8 3/8 x 24 thd 34 61 68 £28.00

34F12 0.5-8 1/2 x 20 thd 34 61 68 £28.00

35J2 1-10 JACOBS 2 35.5 72 81 £28.00

35B12 1-10 DIN B12 35.5 72 81 £28.00

35B16 1-10 DIN B16 40.5 80 89 £32.00

35F38 1-10 3/8 x 24 thd 35.5 72 81 £26.00

35F12 1-10 1/2 x 20 thd 35.5 72 81 £26.00

37J6 1-13 JACOBS 6 43 87 98 £39.00

37J2 1-13 JACOBS 2 43 87 98 £39.00

37J33 1-13 JACOBS 33 43 87 98 £39.00

37B12 1-13 DIN B12 43 87 98 £39.00

37B16 1-13 DIN B16 43 87 98 £39.00

37F38 1-13 3/8 x 24 thd 43 87 98 £39.00

37F12 1-13 1/2 x 20 thd 43 87 98 £39.00

40J6 3-16 JACOBS 6 51 96 108 £48.00

40B16 3-16 DIN B16 51 96 108 £48.00

40F12 3-16 1/2” x 20 thd 51 96 108 £48.00

40F58 3-16 5/8” x 16 thd 51 96 108 £48.00


THS07_MT10_P536-537 28/3/07 10:05 Page 536

537

KEYLESS CHUCKSM

AC

HIN

E TO

OLS

• Rapid clamping and releasing of the drilling tools, no spanner required

Supra SK Industrial Self-Clamping Keyless Chucks

List PriceCode Capacity (mm) Thread (" x UNF) Type (exc VAT)

249804 IND SK 13 1⁄2 x 20 Keyless/locking £63.50

45983 IND 13 1⁄2 x 20 Keyless £33.20

• Rapid clamping and releasing of the drillingtools, no spanner

• Self-clamping

• Keyless industrial/Supra SK keyless industrial locking

Type 136 SUPRA

• Heavy industrial version for stationarydrilling machines

Type 136 SUPRA S and M

• Lightweight version mainly for handoperated drilling machines

Type 144 SUPRA F

• With extended sockets for workpieceswhose surface must not be damaged

Supra Industrial Keyless Chucks

Capacity External Length Length List PriceCode Size (mm) Mount Diameter (mm) Opened (mm) Closed (mm) (exc VAT)

020081 4 0-4 J0 28 48 53.3 £50.50

019985 4 0-4 B10 28 48 53.3 £50.50

019993 6 0-6.5 B10 35 62.5 68.6 £41.10

020008 6 0-6.5 B12 35 62.5 68.6 £41.10

020147 6 0-6.5 3⁄8"-24 35 62.5 68.6 £41.10

020089 6 0-6.5 J1 35 62.5 68.6 £41.10

020012 8 0-8 B12 35.8 70.5 76.9 £43.50

020093 8 0-8 J1 35.8 70.5 76.9 £43.50

020151 8 0-8 3⁄8"-24 35.8 70.5 76.9 £43.50

020155 8 0-8 1⁄2"-20 35.8 70.5 76.9 £43.50

023325 8 0-8 B10 35.8 70.5 76.9 £43.50

215056 8S 0-8 B10 35 62.5 68.6 £43.50

215057 8S 0-8 B12 35 62.5 68.6 £43.50

215058 8S 0-8 J1 35 62.5 68.6 £43.50

215059 8S 0-8 3⁄8"-24 35 62.5 68.6 £43.50

215060 8S 0-8 1⁄2"-20 35 62.5 68.6 £43.50

020020 10 0-10 B12 42.5 82.5 90.1 £51.00

020035 10 0-10 B16 42.5 82.5 90.1 £51.00

020159 10 0-10 3⁄8"-24 42.5 82.5 90.1 £51.00

020163 10 0-10 1⁄2"-20 42.5 82.5 90.1 £51.00

020097 10 0-10 J2 42.5 82.5 90.1 £51.00

020101 10 0-10 J33 42.5 83 90.6 £51.00

305183 10M 0.5-10 B16* 42.5 74.5 80.9 £41.90

023929 10S 0.5-10 3⁄8"-24 35.8 70.5 76.9 £41.90

024032 10S 0.5-10 B12 35.8 72 78.4 £41.90

024117 10S 0.5-10 1⁄2"-20 35.8 70.5 76.9 £41.90

206918 10S 0.5-10 J1 35.8 70.5 76.9 £41.90

033731 F10 0-10 B16 42.5 90 90 £54.50

249910 SK10S 0.5-10 3⁄8"-24 35.8 78 84.4 £55.70

CHUCKS

• 79062 manufactured to DIN 6499, DIN 69871/A – ISO 7388

• 79064 manufactured to DIN 6499, DIN 2080

ER Standard Collet Chucks

Collet Gauge List Price Code Taper Type Length (mm) (exc VAT)

79062-316 30 ER16 60 £91.44

79062-332 30 ER32 60 £91.44

79062-416 40 ER16 60 £101.08

79062-425 40 ER25 60 £101.08

79062-432 40 ER32 70 £98.27

79062-440 40 ER40 70 £116.64

79062-532 50 ER32 70 £143.75

79062-540 50 ER40 80 £149.81

Collet Gauge List Price Code Taper Type Length (mm) (exc VAT)

79064-316 30 ER16 50 £88.11

79064-332 30 ER32 50 £88.11

79064-425 40 ER25 60 £98.33

79064-432 40 ER32 60 £105.90

79064-440 40 ER40 60 £113.46

79064-532 50 ER32 70 £130.69

79064-540 50 ER40 70 £143.23

79062

79064

THS07_MT10_P536-537 28/3/07 10:05 Page 537

CHUCKS

538

MA

CH

INE

TO

OLS

ER Standard Collet Chucks

• Manufactured to DIN 6499 • BT - MAS 403

Gauge List PriceCode Taper Collet Type Length (mm) (exc VAT)

79060-316 30 ER16 60 £114.30

79060-332 30 ER32 60 £114.30

79060-416 40 ER16 60 £116.64

79060-418 40 ER25 60 £116.64

79060-421 40 ER32 70 £113.39

79060-436 40 ER40 70 £116.64

79060-532 50 ER32 70 £166.70

79060-540 50 ER40 80 £172.86

Shell End Mill Holders

• Manufactured to DIN 138 (DIN 69871/A &DIN 2080 available)

• BT - MAS 403

Spigot Gauge List PriceCode Taper Size (mm) Length (mm) (exc VAT)

79001-316 30 16 43 £71.45

79001-322 30 22 43 £71.45

79001-327 30 27 43 £71.45

79001-332 30 32 43 £73.80

79001-416 40 16 52 £76.37

79001-417 40 16 120 £89.32

79001-422 40 22 52 £76.37

79001-423 40 22 120 £89.32

79001-427 40 27 52 £76.37

79001-428 40 27 120 £89.32

79001-432 40 32 52 £79.33

79001-433 40 32 120 £94.99

79001-440 40 40 60 £85.98

79001-516 50 16 65 £112.79

79001-522 50 22 65 £112.79

79001-527 50 27 65 £112.79

79001-532 50 32 65 £119.50

79001-540 50 40 78 £119.50

79001-550 50 50 78 £141.67

End Mill Holders (Weldon)

• Manufactured to DIN 69871/A & DIN 2080 • BT - MAS 403

GaugeFor Weldon Length List Price

Code Taper Shank Tools (mm) (exc VAT)

79006-432 40 32 100 £86.12

79006-442 40 42 100 £121.22

79006-506 50 6 63 £94.61

79006-508 50 8 63 £101.33

79006-510 50 10 63 £101.33

79006-512 50 12 80 £105.95

79006-516 50 16 80 £107.35

79006-520 50 20 80 £107.35

79006-525 50 25 100 £122.63

79006-532 50 32 105 £117.52

79006-540 50 40 120 £141.07

79006-542 40 42 100 £133.05

79006-550 50 50 130 £154.85

GaugeFor Weldon Length List Price

Code Taper Shank Tools (mm) (exc VAT)

79006-306 30 6 50 £66.46

79006-308 30 8 50 £66.46

79006-310 30 10 50 £66.46

79006-312 30 12 50 £66.46

79006-316 30 16 63 £69.05

79006-320 30 20 63 £69.05

79006-406 40 6 50 £74.94

79006-408 40 8 50 £74.94

79006-410 40 10 63 £74.94

79006-412 40 12 63 £74.94

79006-414 40 14 63 £74.94

79006-416 40 16 63 £74.94

79006-420 40 20 63 £77.89

79006-425 40 25 90 £82.21

THS07_MT10_P538-539 28/3/07 10:06 Page 538

539

MA

CH

INE

TO

OLS

CHUCKS

• 4 jaws that are individually adjustable toallow gripping of irregular shapes and allowa square component to be held perfectlycentral to the chuck

• Complete with 1 set of solid reversible jaws

• Plain back mounting

• Body steel 85-160 and cast iron 200-800

4 Jaw Independent Chucks

• Designed to hold round, square andoctagonal workpieces

• Body cast iron

• Supplied with 2 sets of hard solid jaws


4 Jaw Self Centring Scroll Chuck

Standard 3 Jaw Self Centring Scroll Chucks

• Complete with 2 sets of hard jaws

• Body cast iron

• Camlock taper "D" mount



• Body cast iron

• Plain back/front mounting



• Body cast iron


Chuck Ø List Price Code (mm) (") Mount (exc VAT)

7-625-123 125 5 D3 £253.63

7-625-124 125 5 D4 £253.63

7-625-163 160 61⁄4 D3 £280.32

7-625-164 160 61⁄4 D4 £280.32

7-625-203 200 8 D3 £353.74

7-625-204 200 8 D4 £353.74

7-625-205 200 8 D5 £353.74

7-625-206 200 8 D6 £353.74

Chuck Ø List Price Code (mm) (") (exc VAT)

7-605-085 85 33⁄8 £160.19

7-605-100 100 4 £171.80

7-605-125 125 5 £186.88

7-605-160 160 61⁄4 £225.59


7-601-080 80 31⁄4 £152.17

7-601-100 100 4 £162.85

7-601-125 125 5 £177.54

7-601-160 160 61⁄4 £214.26

7-601-200 200 8 £249.62


7-820-085 85 33⁄8 £204.24

7-820-100 100 4 £213.58

7-820-125 125 5 £228.27

7-820-160 160 61⁄4 £249.62

7-820-200 200 8 £260.30

7-820-250 250 10 £293.67


7-800-125 125 5 £206.91

7-800-160 160 61⁄4 £257.63

7-800-200 200 8 £307.02


7-800-250 250 10 £429.83

7-800-315 315 121⁄2 £654.09

7-800-400 400 16 £903.27


7-820-315 315 121⁄2 £427.16

7-820-400 400 16 £592.68

7-820-500 500 20 £840.97

7-820-630 630 25 £1,164.88

7-820-800 800 32 £3,281.63


7-601-250 250 10 £343.60

7-601-315 315 121⁄2 £528.62

7-601-400 400 16 £870.34

7-601-500 500 20 £1,951.59

7-601-630 630 25 £2,869.99


7-605-200 200 8 £262.97

7-605-250 250 10 £351.99

7-605-315 315 121⁄2 £557.98

7-605-400 400 16 £917.06

Chuck Ø List Price Code (mm) (") Mount (exc VAT)

7-625-255 250 10 D5 £467.21

7-625-256 250 10 D6 £467.21

7-625-258 250 10 D8 £467.21

7-625-316 315 121⁄2 D6 £680.79

7-625-318 315 121⁄2 D8 £680.79

7-625-406 400 16 D6 £1,148.00

7-625-408 400 16 D8 £1,148.00

7-625-509 500 20 D11 £2,296.00

THS07_MT10_P538-539 28/3/07 10:06 Page 539

CHUCKS

CHUCKS

540

MA

CH

INE

TO

OLS

Horizontal and Vertical Indexing Units

• Designed for milling, drilling, jig boring andrelated machining operations

• Angular indexing can be performed throughthe graduation ring from 0 to 360° inincrements of 1°

• Basic indexing is achieved by means of acatch device permiting divisions in2,3,4,6,8,12 and 24

• Indexing accuracy +/- 120 seconds

• 125mm will take 5C collet adaptor

Chuck Hole Through List Price Code Size (mm) Unit (mm) (exc VAT)

7-298-125 125 25 £796.91

7-298-160 160 42 £873.01

7-298-200 200 55 £1,234.76

7-298-250 250 76 £1,605.38

7-298-315 315 76 £2,616.36

Horizontal and Vertical Super Spacers

• Designed for milling, drilling, jig boring andrelated machining operations

• Angular indexing can be performed throughthe graduation ring from 0 to 360° inincrements of 1°

• Basic indexing is achieved by means of acatch device permitting divisions in2,3,4,6,8,12 and 24

• Indexing accuracy 2 seconds

• 160 and 200mm have friction bearing 250 and 315mm have a special heavy dutyroller bearing

Chuck Hole Through List Price Code Size (mm) Unit (mm) (exc VAT)

7-281-160 160 42 £918.40

7-281-200 200 55 £1,246.77

7-281-250 250 76 £2,007.66

7-281-315 315 103 £3,331.86

Horizontal and Vertical Rotary Table

• Simple and compact construction providing3 types of dividing

• Indexing through the graduation ring from0 to 360°

• Basic indexing through catch device

• Rapid indexing in 2,3,4,6,8,12 and 24 parts,through a set of dividing plates

• A disengageable worm gear permits directand rapid indexing

• Complete with and without dividing plates

• Centre hole 3MT

Table Dividing List Price Code Size (mm) Plates (exc VAT)

7-296-160S 160 No £744.87

7-296-200S 200 No £945.10

7-296-250S 250 No £1,141.32

7-296-320S 320 No £1,201.39

7-296-160 160 Yes £699.47

7-296-200 200 Yes £1,239.44

7-296-250 250 Yes £1,523.76

7-296-320 320 Yes £1,535.11

• 24 position plate is hardened and ground

• 6 masking plates for 2, 3, 4, 6, 8 and 12 divisions

• 6" 3 jaw chuck

• Suitable for use on drilling, milling and jigboring machines

Super Spacer – SS6


2-300-200 £395.00

• Complete answer to indexing requirements

• Suitable to use on drilling, milling and jigboring machines

• 24 position index plate is hardened and dialis in satin chrome

• 360° graduation ring and venier calibrationto 10 seconds

• Worm gear ratio of 90:1 for easy count

• Complete with 8" chuck,10" faceplate,tailstock, indexing plates and 6 maskingplates

Super Indexing Spacer – SIS8


2-300-100 £795.00

• The circumference of the table is scaled 360°

• Worm gear ratio is 90:1

• Centre of table is fitted to an inner conicaltapered part

• Direct reading on dial, 1 minute of a degreeand on Venier Scale 10 seconds (1/360

th of adegree) except 2-200-100 20 seconds

Horizontal and Vertical Rotary Tables

Diameter Centre No of List PriceCode (") Sleeve Slots (exc VAT)

2-200-100 6 2MT 4 £175.00

2-200-200 8 3MT 4 £275.00

2-200-300 10 3MT 6 £350.00

2-200-400 12 4MT 6 £475.00

2-200-500 14 4MT 6 £550.00

2-200-600 16 4MT 6 £850.00

THS07_MT10_P540-541 28/3/07 10:07 Page 540

541

MA

CH

INE

TO

OLS

CHUCKS

• For Toolmex chucks 7-300-, 7-320-,7-601-,7-605-,7-625-,7-628-,7-642-,7-630-

• Hard jaws supplied as supplement or asspare parts MUST be ground on the chuckto ensure centering accuracy

Hard Outside Jaws for 3 Jaw Scroll Chucks

• Simple key operated scroll provides auniform, distortion free clamping of theworkpice and low collet exchange time

• Holding capacity 1.20 - 28.5mm


5C Collet Chuck

Chuck Jaw List Price Code (mm) (exc VAT)

7-370-250 250 £104.66

7-370-315 315 £167.05

7-370-400 400 £196.23

7-370-500 500 £339.06

7-370-630 630 £435.18


7-370-080 80 £48.73

7-370-100 100 £51.06

7-370-125 125 £61.14

7-370-160 160 £71.70

7-370-200 200 £79.65


7-690-125 125 5 £304.16

Hard Inside Jaws for 3 Jaw Scroll Chucks




7-360-250 250 £104.66

7-360-315 315 £167.05

7-360-400 400 £196.23

7-360-500 500 £395.57

7-360-630 630 £543.96


7-360-080 80 £48.73

7-360-100 100 £51.06

7-360-125 125 £61.14

7-360-160 160 £71.70

7-360-200 200 £79.65

Soft Solid Jaws for 3 Jaw Scroll Chucks



7-385-250 250 £66.74

7-385-315 315 £91.77

7-385-400 400 £138.49

7-385-500 500 £255.30

7-385-630 630 £350.41


7-385-080 80 £36.04

7-385-100 100 £39.05

7-385-125 125 £41.05

7-385-160 160 £47.36

7-385-200 200 £53.40

Hard Top Jaws for 3 Jaw Scroll Chucks




7-390-315 315 £175.40

7-390-400 400 £226.07

7-390-500 500 £356.41

7-390-630 630/800 £456.53


7-390-125 125 £75.78

7-390-160 160 £86.19

7-390-200 200 £111.50

7-390-250 250 £124.15

Soft Top Jaws for 2 Jaw Scroll Chucks

• For Toolmex chucks 7-774-


7-381-250 250 £45.05

7-381-315 315 £56.90


7-381-160 160 £27.37

7-381-200 200 £30.79

THS07_MT10_P540-541 28/3/07 10:07 Page 541

542

CHUCKSM

AC

HIN

E TO

OLS

Adaptors for Bison Chucks

For Chuck List Price Code Size (mm) Taper No (exc VAT)

Rough cast adaptors for plain back chucks

7-900-125 80, 100, 125 POA

7-900-160 160 £47.52

7-900-200 200 £53.53

7-900-250 250 £69.41

7-900-315 315 POA

7-900-400 400 POA

7-900-500 500 POA

Part finished adaptors for direct mounting on spindle nose type "D" DIN 55029

7-905-123 125 D3 £93.44

7-905-163 160 D3 £112.29

7-905-164 160 D4 £112.29

7-905-203 200 D3 £129.64

7-905-204 200 D4 £129.64

7-905-205 200 D5 £129.64

7-905-206 200 D6 £129.64

7-905-255 250 D5 £154.66

7-905-256 250 D6 £154.66

7-905-258 250 D8 £167.40

7-905-316 315 D6 £205.57

7-905-318 315 D8 £205.57

7-905-319 315 D11 £243.70

7-905-406 400 D6 £273.94

7-905-408 400 D8 £322.83

7-905-409 400 D11 £382.57

7-905-508 500 D8 £445.05

7-905-509 500 D11 £593.40

7-905-609 630 D11 £707.49

Fully finished adaptors for direct mounting onspindle nose type "D" DIN 53029

7-907-163 160 D3 £122.81

7-907-164 160 D4 £122.81

7-907-165 160 D5 £122.81

7-907-203 200 D3 £149.50

7-907-204 200 D4 £149.50

7-907-205 200 D5 £149.50

7-907-206 200 D6 £149.50

7-907-255 250 D5 £170.88

7-907-256 250 D6 £175.76

7-907-258 250 D8 £175.76

7-907-316 315 D6 £242.95

7-907-318 315 D8 £242.95

7-907-319 315 D11 £255.89

7-907-408 400 D8 £355.08

7-907-508 500 D8 £600.70

7-907-509 500 D11 £623.07

For Chuck List Price Code Size (mm) Taper No (exc VAT)

Part finished adaptors for direct mount on spindle nose type "L" ANSI BS.9

7-910-159 160 L00 £82.09

7-910-160 160 L0 £82.09

7-910-199 200 L00 £113.12

7-910-200 200 L0 £113.12

7-910-201 200 L1 £113.12

7-910-249 250 L00 £126.15

7-910-250 250 L0 £126.15

7-910-251 250 L1 £126.15

7-910-252 250 L2 £126.85

7-910-310 315 L0 £208.58

7-910-311 315 L1 £227.73

7-910-312 315 L2 £241.40

7-910-401 400 L1 £288.65

7-910-402 400 L2 £295.73

7-910-502 500 L2 £513.53

7-910-503 500 L3 £536.69

Part finished adaptors for direct mounting onspindle nose type "C" DIN 55027

7-920-123 125 C3 POA

7-920-164 160 C4 POA

7-920-165 160 C5 POA

7-920-205 200 C5 POA

7-920-206 200 C6 £97.58

7-920-255 250 C5 £129.93

7-920-256 250 C6 £129.93

7-920-258 250 C8 £129.93

7-920-316 315 C6 £170.87

7-920-318 315 C8 £170.87

7-920-408 400 C8 £278.99

7-920-409 400 C11 POA

7-920-508 500 C8 POA

7-920-509 500 C11 £480.56

Fully finished adaptors for direct mounting on spindle nose type "C" DIN 53027

7-921-123 125 C3 £95.06

7-921-124 125 C4 £95.05

7-921-164 160 C4 £103.78

7-921-165 160 C5 £103.78

7-921-206 200 C6 £113.20

7-921-256 250 C6 £136.42

7-921-258 250 C8 £136.42

7-921-316 315 C6 £179.41

7-921-318 315 C8 £179.41

7-921-319 315 C11 £214.92

7-921-408 400 C8 £280.06

7-921-409 400 C11 £341.47

7-905

7-907

7-920

7-921

7-910

7-900

GO TO WOODWORKING FOR OTHER LATHE CHUCKSPAGES 767-769

THS07_MT10_P542-543 29/3/07 12:34 Page 542

http://80.4.177.27/webnative/imageinfo?-id+151190+/Volumes/XRAID/FullPress_Volumes/THS/Logos/103145_THS%20New%202007/suppliers/Toolmex_Palmach_Ltd/Toolmex%20UKLtdFinal.eps

http://80.4.177.27/webnative/imageinfo?-id+400352+/Volumes/XRAID/FullPress_Volumes/THS/images/103145_THS%20New%202007/THS_Master/chain_bw_SM.tif

http://80.4.177.27/webnative/imageinfo?-id+104817+/Volumes/XRAID/FullPress_Volumes/THS/images/103145_THS%20New%202007/Supplier%20/Toolmex_Palmach_Ltd/Adaptors%20-%20THS/Adaptors%207-905-....eps





http://80.4.177.27/webnative/imageinfo?-id+363937+/Volumes/XRAID/FullPress_Volumes/THS/images/103145_THS%20New%202007/Supplier%20/Toolmex_Palmach_Ltd/missing%20image81106/7-900.eps

http://80.4.177.27/webnative/imageinfo?-id+426631+/Volumes/XRAID/FullPress_Volumes/THS/images/103145_THS%20New%202007/THS_Master/chain_BW_Filler.tif

http://80.4.177.27/webnative/imageinfo?-id+203940+/Volumes/XRAID/FullPress_Volumes/THS/images/103145_THS%20New%202007/Supplier%20/Record_Power/Wood%20Turning/Chucks/RP4000A.eps

http://80.4.177.27/webnative/imageinfo?-id+439319+/Volumes/XRAID/FullPress_Volumes/THS/images/103145_THS%20New%202007/Supplier%20/Record_Power/new260207/RP3500%20Set.tif

543

LATHE CHUCK KEYSM

AC

HIN

E TO

OLS

CHUCKS

Key for 3 Jaw Scroll Chucks

• For Toolmex chucks 7-300-, 7-320-,7-325-,7-353-,7-601-,7-605-,7-625-,7-642

Chuck List PriceCode Size (mm) Size (mm) (exc VAT)

7-440-080 6 80 £16.36

7-440-100 9 100/125 £22.02

7-440-100L 9 x 160 Long 100/125 £24.14

7-440-160 11 160/200 £22.69

7-440-160L 11 x 160 Long 160/200 £26.37

7-440-200X 11 x 350 Long 160/200 £38.70

7-440-250 14 250/315 £26.37

7-440-250L 14 x 160 Long 250/315 £30.01

7-440-250X 14 x 350 Long 250/315 £44.72

7-440-251 14 x 400 Long 250/315 £55.18

7-440-400 17 400 £55.18

7-440-500 19 500/630 £60.40

7-440-800 19 800 £85.43

• Serrated soft jaws to suit chucks with metric serrations

• Material 080M15 (EN32)

• Black finish

Chuck Dimensions (mm) Hole Centres To Suit List PriceCode Diameter (mm) A B C D Type J & K (mm) Bolt Serrations (exc VAT)

BO04 110 48 25 20 8 A 15 + 8 M6 1.5mm x 60° £13.38

BR05 105/110/135 50 25 25 10 B 14 + 10 M8 1.5mm x 60° £18.10

DK05 105/110/135 55 50 25 10 A 14 + 10 M8 1.5mm x 60° £19.99

BO05 135 57 32 25 10 B 18 + 10 M8 1.5mm x 60° £19.10

DJ05 135 57 50 25 10 A 18 + 10 M8 1.5mm x 60° £20.31

BO06 165 72 38 32 12 A 20 + 15 M10 1.5mm x 60° £14.81

DJ06 165 72 57 32 12 A 20 + 15 M10 1.5mm x 60° £20.73

PT06 165 82 32 32 12 B 20 + 15 M10 1.5mm x 60° £19.20

BO08 210 95 44 32 14 A 25 + 25 M12 1.5mm x 60° £16.36

DJ08 210 95 70 32 14 A 25 + 25 M12 1.5mm x 60° £28.86

PT08 210 102 44 32 14 B 25 + 25 M12 1.5mm x 60° £24.41

BO10 254 110 40 40 16 A 30 + 30 M12 1.5mm x 60° £18.20

DJ10 254 110 80 40 16 A 30 + 30 M12 1.5mm x 60° £33.89

PT10 254 125 40 40 16 B 30 + 30 M12 1.5mm x 60° £27.46

BR10 254 110 60 40 16 A 30 + 30 M12 1.5mm x 60° £27.64

BO12 304/315 130 50 50 18 A 30 + 40 M14 1.5mm x 60° £26.24

DJ12 304/315 130 80 50 18 A 30 + 40 M14 1.5mm x 60° £49.39

PT12 304/315 145 50 50 18 B 30 + 40 M14 1.5mm x 60° £43.52

BR13 304/315 130 50 50 21 A 30 + 40 M16 1.5mmx 60° £26.20

DJ13 304/315 130 80 50 21 A 30 + 40 M16 1.5mm x 60° £49.39

PT13 304/315 145 50 50 21 B 30 + 40 M16 1.5mm x 60° £43.52

BO15 380/450 165 80 60 22 A 43 + 37 M20 1.5mm x 60° £63.57

DJ15 380/450 165 127 64 22 A 43 + 37 M20 1.5mm x 60° £137.00

BO18 454/530/610 180 76 64 25 A 60 + 40 M20 3mm x 60° £104.74

DJ18 454/530/610 180 127 64 25 A 60 + 40 M20 3mm x 60° £162.71

Lathe Chuck Jaws

Type A

Type B

THS07_MT10_P542-543 28/3/07 10:08 Page 543

EJECTING DRIFTS

544

CHUCKSM

AC

HIN

E TO

OLS

Chuck Dimensions (mm) List PriceCode Diameter (mm) A B C D J (exc VAT)

Scroll Soft Jaws To Suit Pratt Burnerd Metric Scroll Chucks

EK08 80 37 30 10 5 6 £20.38

EK10 100 42 35 14 7 6 £20.63

EK13 125 53 38 16 7 6 £20.75

EK16 160 68 45 18 7 6 £23.62

EK20 200 78 57 22 8 8 £26.11

EK25 250 100 70 25 8 8 £34.25

EK32 315 124 75 32 12 10 £43.78

EK40 400 154 89 32 12 12 £63.66

Scroll Soft Jaws To Suit Pratt Burnerd Old Imperial Scroll Chucks

EJB 80 32 32 9.4 4.85 4.24 £21.02

EJC 100 41 35 14.1 4.85 5.08 £21.25

EJE 125 51 40 15.75 8.03 6.35 £21.37

EJG 160 70 44 18.79 8.03 6.35 £24.33

EJJ 200 76 57 20.62 9.53 8.46 £27.15

EJM 250 102 70 25.4 11.1 8.46 £35.61

EJP 315 114 70 28.19 12.88 8.46 £45.09

EJQ 380 127 76 30.15 11.43 10.16 £65.81

EJR 460/535/610 146 90 38.1 14.3 12.7 £123.76

Chuck Dimensions (mm) List PriceCode Diameter (mm) A B C D J (exc VAT)

EN08 80 32 28 11 6 4 £26.00

EN10 100 42 34 15 6 6 £17.50

EN13 125 51 38 20 8 7 £20.90

EN16 160 70 51 20 8 8 £24.59

EN20 200 85 57 25 10 8 £28.19

EN25 250 105 70 28 12 9 £36.82

EN32 315 127 76 32 12 10 £49.49

EN40 400 145 90 36 14 12 £76.40

Scroll Chuck Jaws

Toolmex/Bison Scroll Chuck Jaws

• Material 080M15

• According to DIN 317

• Hardened and black oxide special steel

Morse Taper Ejecting Drifts

For EjectingMorse Compatible List Price

Code Tapers Style (exc VAT)

DR0 0 900 £2.50

DR12 1-2 902 £2.90

DR23 2-3 £3.50

DR34 3-4 903 £3.95

DR45 4-5 904 £7.15

DR56 5-6 906 £12.40

Semi-Automatic Morse Taper Ejecting Drifts

For EjectingMorse Compatible List Price

Code Tapers Style (exc VAT)

DRA123 1-2-3 900 £16.25

DRA456 4-5-6 902 £20.50

Morse Taper Ejecting Drifts

EJECTING DRIFTS

For Ejecting List PriceCode Morse Tapers (exc VAT)

91040 0 £4.54

91040 1-2 £6.04

91040 3-4 £8.26

For Ejecting List PriceCode Morse Tapers (exc VAT)

91040 4-5 £18.79

91040 6 £27.38

• According to DIN 317 • Hardened and black oxide special steel

THS07_MT10_P544-545 28/3/07 10:09 Page 544

MA

CH

INE

TO

OLS

545

ARBORS

Morse-taper Drill Chuck L A C E G H List PriceCode DIN 228 b Taper (mm) (mm) (mm) (mm) (mm) (mm) (exc VAT)

14893 0 B10 79 56.5 9.045 14.5 10.095 9.4 £7.10

14894 0 B12 85 56.5 9.045 18.5 12.065 11.1 £6.90

14897 1 B10 86 62 12.065 14.5 10.095 9.4 £5.90

14898 1 B12 89 62 12.065 18.5 12.065 11.1 £5.90

14899 1 B16 97 62 12.065 24 15.733 14.5 £5.30

14900 1 B18 106 62 12.065 32 17.78 16.2 £6.00

*18755 1 B18 97 62 12.065 25 17.431 16.2 £6.20

*18756 2 B18 108.5 75 17.78 25 17.431 16.2 £6.90

14904 2 B10 103.5 75 17.78 14.5 10.095 9.4 £6.70

14905 2 B12 106.5 75 17.78 18.5 12.065 11.1 £6.70

14906 2 B16 110.5 75 17.78 24 15.733 14.5 £6.70

14907 2 B18 117.5 75 17.78 32 17.78 16.2 £6.70

14908 2 B22 128.5 75 17.78 40.5 21.793 19.8 £8.60

14911 3 B12 125 94 23.825 18.5 12.065 11.1 £8.80

14912 3 B16 134 94 23.825 24 15.733 14.5 £8.80

14913 3 B18 141 94 23.825 32 17.78 16.2 £9.00

14914 3 B22 147 94 23.825 40.5 21.793 19.8 £9.30

14915 3 B24 158 94 23.825 50.5 23.825 21.3 £13.10

*18757 3 B18 132 94 23.825 25 17.431 16.2 £9.20

*18758 4 B18 159 117.5 31.267 25 17.431 16.2 £15.30

14916 4 B16 159 117.5 31.267 24 15.733 14.5 £14.80

14917 4 B18 168 117.5 31.267 32 17.78 16.2 £15.00

14918 4 B22 176 117.5 31.267 40.5 21.793 19.8 £18.60

14919 4 B24 185 117.5 31.367 50.5 23.825 21.3 £19.30

*18759 5 B18 195.5 149.5 44.399 25 17.431 16.2 £43.90

14920 5 B16 196 149.5 44.399 24 15.733 14.5 £42.90

14921 5 B18 204.5 149.5 44.399 32 17.78 16.2 £43.00

14922 5 B22 213.5 149.5 44.399 40.5 21.793 19.8 £44.30

14923 5 B24 224.5 149.5 44.399 50.5 23.825 21.3 £45.70

14970 1 J2 86.5 62 12.065 16.7 9.754 8.5 £7.20

14971 1 J2 92 62 12.065 22.2 14.199 12.4 £7.20

14972 1 J3 101 62 12.065 31 20.599 19 £7.40

14974 1 J6 95 62 12.065 25.4 17.17 15.9 £7.10

14976 2 J1 101 75 17780 16.7 9.754 8.5 £7.60

14977 2 J2 106.5 75 17780 22.2 14.199 12.4 £7.60

14978 2 J3 115.5 75 17.78 31 20.559 15.9 £7.60

14980 2 J33 109.5 75 17.78 25.4 15.85 14.2 £7.60

14981 2 J6 109.5 75 17.78 25.4 17.17 15.9 £7.60

14983 3 J2 126 94 23.825 22.2 14.199 12.4 £10.20

14984 3 J3 135 94 23.825 31 20.599 19 £10.20

14987 3 J33 129 94 23825 25.4 15.85 14.2 £10.20

14988 3 J6 129 94 23.825 25.4 17.17 15.9 £10.20

14991 4 J3 161 117.5 31.267 31 20.599 19 £17.20

14995 4 J6 155 117.5 31.267 25.4 17.17 15.9 £17.80

* For Supra with shortened pick up taper

Type 236 Taper Shank Arbors

SEE OUR

CUTTING TOOLSSECTION FOR HSS DRILLS PAGES 250-262

THS07_MT10_P544-545 28/3/07 10:09 Page 545

ARBORS

546

MA

CH

INE

TO

OLS

Morse Taper Taper List PriceCode Shank Mount (exc VAT)

C1J0 1 JTO £5.00

C1J1 1 JT1 £5.00

C1J2 1 JT2 £5.00

C1J3 1 JT3 £5.00

C1J6 1 JT6 £5.00

C1J33 1 JT33 £5.00

C1B10 1 DIN B10 £5.00

C1B12 1 DIN B12 £5.00

C1B16 1 DIN B16 £5.00

C1B18 1 DIN B18 £5.00

C2J0 2 JTO £5.50

C2J1 2 JT1 £5.50

C2J2 2 JT2 £5.50

C2J3 2 JT3 £5.50

C2J4 2 JT4 £19.95

C2J6 2 JT6 £5.50

C2J33 2 JT33 £5.50

C2B10 2 DIN B10 £5.50

C2B12 2 DIN B12 £5.50

C2B16 2 DIN B16 £5.50

C2B18 2 DIN B18 £5.50

C2B22 2 DIN B22 £5.50

C3J1 3 JT1 £6.75

C3J2 3 JT2 £6.75

C3J3 3 JT3 £6.75

C3J4 3 JT4 £9.00

C3J5 3 JT5 £21.75

C3J6 3 JT6 £6.75

C3J33 3 JT33 £6.75

C3B12 3 DIN B12 £6.75

C3B16 3 DIN B16 £6.75

C3B18 3 DIN B18 £6.75

C3B22 3 DIN B22 £6.75

C3B24 3 DIN B24 £6.75

C4J2 4 JT2 £11.15

C4J3 4 JT3 £11.15

C4J4 4 JT4 £11.15

C4J5 4 JT5 £22.75

C4J6 4 JT6 £11.15

C4J33 4 JT33 £11.15

C4B16 4 DIN B16 £11.15

C4B18 4 DIN B18 £11.15

C4B22 4 DIN B22 £11.15

C4B24 4 DIN B24 £11.15

C5J3 5 JT3 £25.00

C5J4 5 JT4 £32.75

C5J5 5 JT5 £32.75

C5J6 5 JT6 £25.00

C5B16 5 DIN B16 £25.00

C5B18 5 DIN B18 £25.00

C5B22 5 DIN B22 £25.00

C5B24 5 DIN B24 £25.00

Morse Taper Shank Arbors with Taper Mounts

Morse Taper Taper List PriceCode Shank Mount (exc VAT)

C1F38 1 3⁄8" x 24 £14.60

C1F12 1 1⁄2" x 20 £14.60

C1F34 1 3⁄4" x 16 £14.60

C2F38 2 3⁄8" x 24 £16.80

C2F12 2 1⁄2" x 20 £16.80

C2F58 2 5⁄8" x 16 £16.80

C2F34 2 3⁄4" x 16 £16.80

C3F38 3 3⁄8" x 24 £19.00

C3F12 3 1⁄2" x 20 £19.00

C3F58 3 5⁄8" x 16 £19.00

C3F34 3 3⁄4" x 16 £19.00

Morse Taper Shank Arbors with Threaded Mounts

Shank Taper List PriceCode Diameter Mount (exc VAT)

38D JT0 3⁄8" JT0 £10.00

38D JT1 3⁄8" JT1 £10.00

12D JT0 1⁄2" JT0 £10.00

12D JT1 1⁄2" JT1 £10.00

12D JT2 1⁄2" JT2 £10.00

12D JT3 1⁄2" JT3 £10.00

12D JT6 1⁄2" JT6 £10.00

12D JT33 1⁄2" JT33 £10.00

58D JT1 5⁄8" JT1 £11.00

58D JT2 5⁄8" JT2 £11.00

58D JT3 5⁄8" JT3 £11.00

58D JT6 5⁄8" JT6 £11.00

58D JT33 5⁄8" JT33 £11.00

34D JT1 3⁄4" JT1 £12.00

34D JT2 3⁄4" JT2 £12.00

34D JT3 3⁄4" JT3 £12.00

34D JT6 3⁄4" JT6 £12.00

34D JT33 3⁄4" JT33 £12.00

1D JT2 1" JT2 £15.00

1D JT3 1" JT3 £15.00

1D JT6 1" JT6 £15.00

1D JT33 1" JT33 £15.00

PA20JT6 20mm JT6 £12.00

PA20B16 20mm DIN B16 £12.00

PA25JT6 25mm JT6 £15.00

PA25B16 25mm DIN B16 £15.00

Parallel Shank Arbors withTaper Mounts

Taper List PriceCode Shank Mount (exc VAT)

CR8J6 R8 JT6 £24.00

CR8J2 R8 JT2 £24.00

CR8J3 R8 JT3 £24.00

CR8B16 R8 DIN B16 £24.00

CR8J33 R8 JT33 £24.00

CR8MT2 R8 2MT bore £35.00

CR8MT3 R8 3MT bore £35.00

Bridgeport Taper Arbors/Adaptors

List PriceCode Description (exc VAT)

C2R 2MT shank with 19mm Weldon shank bore £85.00

C3R 3MT shank with 19mm Weldon shank bore £90.00

19WELDON 19mm Weldon shank adaptorwith 1/2” x 20 thread £8.50

Morse Taper Adaptor for usewith Annular Hole Cutters

THS07_MT10_P546-547 28/3/07 10:10 Page 546

547

MA

CH

INE

TO

OLS

SLEEVES & SOCKETS

SLEEVES & SOCKETS

• Manufactured according to BS1660

• Oil Toughened

• Hardened and Ground

• Bright finish

Morse Taper Reducing Sleeves

Taper Taper List Price Code Internal External (exc VAT)

Hardened and Ground

9103010 0 1 £20.13

9103020 0 2 £54.54

9103021 1 2 £20.89

9103031 1 3 £24.08

9103032 2 3 £23.10

9103041 1 4 £43.11

9103042 2 4 £43.11

9103043 3 4 £43.73

9103051 1 5 £92.25

9103052 2 5 £104.17

9103053 3 5 £104.17

9103054 4 5 £104.17

9103063 3 6 £299.08

9103064 4 6 £299.08

9103065 5 6 £299.08


Oil Toughened

910201 0 1 £11.74

910202 0 2 £47.16

9102021 1 2 £12.17

9102031 1 3 £12.76

9102032 2 3 £12.76

9102041 1 4 £24.58

9102042 2 4 £24.58

9102043 3 4 £25.18

9102051 1 5 £62.76

9102052 2 5 £60.31

9102053 3 5 £58.33

9102054 4 5 £58.33

9102063 3 6 £215.56

9102064 4 6 £215.56

9102065 5 6 £215.56

SLEEVES & SOCKETS

Morse Taper Sleeves

• Manufactured to DIN 2185 • Completely hardened and ground

Internal External List Price Code MT MT (exc VAT)

7-176-040 2 5 £20.28

7-176-045 3 5 £20.28

7-176-050 4 5 £20.28

7-176-055 4 6 £54.20

7-176-060 5 6 £54.20

7-176-067 6 7 £279.63

Internal External List Price Code MT MT (exc VAT)

7-176-005 1 2 £6.58

7-176-010 1 3 £8.38

7-176-015 2 3 £8.38

7-176-020 1 4 £12.17

7-176-025 2 4 £12.17

7-176-030 3 4 £12.17

7-176-035 1 5 £21.41

• Case hardened, ground internally and externally

Turret Lathe Sockets

MorseOutside Taper List Price

Code Diameter Bore (exc VAT)

1TS75 3⁄4" 1 £35.20

1TS1 1" 1 £20.10

1TS15 11⁄2" 1 £28.10

20TS1 20mm 1 £32.00

25TS1 25mm 1 £32.00

2TS1 1" 2 £20.10

2TS125 11⁄4" 2 £34.40

2TS15 11⁄2" 2 £25.00

2TS2 2" 2 £43.30

25TS2 25mm 2 £32.00

40TS2 40mm 2 £46.00

3TS125 11⁄4" 3 £32.65

3TS15 11⁄2" 3 £26.90

3TS175 13⁄4" 3 £36.10

MorseOutside Taper List Price

Code Diameter Bore (exc VAT)

3TS2 2" 3 £44.40

3TS2125 21⁄8" 3 £57.20

3TS25 21⁄2" 3 £62.70

30TS3 30mm 3 £43.00

40TS3 40mm 3 £46.00

50TS3 50mm 3 £60.00

4TS15 11⁄2" 4 £33.80

4TS2 2" 4 £47.55

4TS2125 21⁄8" 4 £63.80

4TS25 21⁄2" 4 £68.70

40TS4 40mm 4 £52.00

50TS4 50mm 4 £70.00

5TS2125 21⁄8" 5 £68.20

5TS25 21⁄2" 5 £80.30

THS07_MT10_P546-547 28/3/07 10:10 Page 547

548

SLEEVES & SOCKETSM

AC

HIN

E TO

OLS

• Precision ground externally hardened tang

Oil Toughened Extension Sockets

Morse Taper Morse Taper Extension Overall Parallel List PriceCode External (Machine) Internal (Tool) Length (mm) Length (mm) Diameter (mm) (exc VAT)

OTBL11 1 1 76 * 145 20 £14.45

OTBL12 1 2 91 160 30 £15.90

OTBL21 2 1 76 160 20 £16.00

OTBL22 2 2 91 * 175 30 £17.15

OTBL23 2 3 112 196 36 £17.15

OTBL31 3 1 76 175 20 £21.10

OTBL32 3 2 91 195 30 £18.35

OTBL33 3 3 112 * 215 36 £20.45

OTBL34 3 4 137 240 48 £23.40

OTBL41 4 1 76 200 20 £23.75

OTBL42 4 2 91 215 30 £23.75

OTBL43 4 3 112 240 36 £21.60

OTBL44 4 4 137 * 265 48 £25.85

OTBL45 4 5 172 300 63 £35.05

OTBL52 5 2 91 247 30 £45.45

OTBL53 5 3 112 268 36 £45.45

OTBL54 5 4 137 300 48 £38.38

OTBL55 5 5 172 335 63 £57.00

*Available in longer length on request, please ask for details

• Precision ground internally and externally to DIN 2187

Morse Taper Morse Taper Extension Overall Parallel List PriceCode External (Machine) Internal (Tool) Length (mm) Length (mm) Diameter (mm) (exc VAT)

BL11 1 1 76 145 20 £19.00

BL12 1 2 91 160 30 £23.85

BL21 2 1 76 160 20 £20.20

BL22 2 2 91 175 30 £22.60

BL23 2 3 112 196 36 £28.00

BL31 3 1 76 175 20 £26.75

BL32 3 2 91 195 30 £23.50

BL33 3 3 112 215 36 £28.36

BL34 3 4 137 240 48 £43.15

BL41 4 1 76 200 20 £36.75

BL42 4 2 91 215 30 £36.75

BL43 4 3 112 240 36 £36.75

BL44 4 4 137 265 48 £42.70

BL45 4 5 172 300 63 £67.50

BL51 5 1 76 232 20 £66.65

BL52 5 2 91 247 30 £66.65

BL53 5 3 112 268 36 £66.65

BL54 5 4 137 300 48 £52.50

BL55 5 5 172 335 63 £71.15

BL61 6 1 76 294 20 £150.00

BL62 6 2 91 309 30 £150.00

BL63 6 3 112 330 36 £150.00

BL64 6 4 137 355 48 £150.00

BL65 6 5 172 390 63 £150.00

Hardened and Ground Extension Sockets

New Tang Style Reducing Sleeves

• Enables all manner of morse taper shanktools with broken or twisted tangs to be re-used by grinding a new tang to matchthe lower re-positioned ejecting slot


NTB12 1 2 £9.15

NTB23 2 3 £11.25

NTB34 3 4 £18.55

NTB45 4 5 £37.50

THS07_MT10_P548-549 28/3/07 10:11 Page 548

549

SLEEVES & SOCKETS

CENTRES

MA

CH

INE

TO

OLS

• Hardened and precision ground to DIN806

Morse Taper Point Diameter Large Diameter Overall Length List PriceCode Shank Angle Point (mm) Tip (mm) (mm) (exc VAT)

Carbon Steel

CFN1 1 Full Point 60° 12.2 80 £6.40

CFN2 2 Full Point 60° 18.0 100 £7.00

CFN3 3 Full Point 60° 24.1 125 £9.15

CFN4 4 Full Point 60° 31.6 160 £14.30

CFN5 5 Full Point 60° 44.7 200 £23.90

CFN6 6 Full Point 60° 63.8 270 £63.60

CFR1 1 Half Point 60° 12.2 80 £7.70

CFR2 2 Half Point 60° 18.0 100 £8.40

CFR3 3 Half Point 60° 24.1 125 £10.90

CFR4 4 Half Point 60° 31.6 160 £16.40

CFR5 5 Half Point 60° 44.7 200 £28.55

CFR6 6 Half Point 60° 63.8 270 £76.85

Carbide Tipped

CFW1 1 Full Point 60° 7 80 £20.15

CFW2 2 Full Point 60° 7 100 £24.95

CFW3 3 Full Point 60° 11 125 £30.75

CFW4 4 Full Point 60° 14 160 £45.45

CFW5 5 Full Point 60° 18 200 £64.15

CFW6 6 Full Point 60° 18 270 £146.30

CFWR1 1 Half Point 60° 7 80 £20.15

CFWR2 2 Half Point 60° 7 100 £24.95

CFWR3 3 Half Point 60° 11 125 £30.75

CFWR4 4 Half Point 60° 14 160 £45.45

CFWR5 5 Half Point 60° 18 200 £64.15

CFWR6 6 Half Point 60° 18 270 £146.30

Carbon Steel and Carbide Tipped Lathe Fixed Centres

• Precision ground internally and externally to DIN2185

• Ground externally, hardened Tang

Morse Taper Hardened and Ground Reducing Sleeves

Morse Taper Oil Toughened Reducing Sleeves


B01 0 1 £9.55

B02 0 2 £24.00

B12 1 2 £8.55

B13 1 3 £9.35

B23 2 3 £9.35

B14 1 4 £14.60

B24 2 4 £14.60

B34 3 4 £14.60


B15 1 5 £30.00

B25 2 5 £30.00

B35 3 5 £30.00

B45 4 5 £30.00

B36 3 6 £85.00

B46 4 6 £85.00

B56 5 6 £85.00

B67 6 7 £POA


OTB01 0 1 £5.87

OTB12 1 2 £5.30

OTB13 1 3 £6.05

OTB23 2 3 £6.05

OTB14 1 4 £10.25

OTB24 2 4 £10.25

OTB34 3 4 £10.25


OTB15 1 5 £22.15

OTB25 2 5 £22.15

OTB35 3 5 £22.15

OTB45 4 5 £22.15

OTB36 3 6 £65.90

OTB46 4 6 £65.90

OTB56 5 6 £65.90

THS07_MT10_P548-549 28/3/07 10:11 Page 549

550

CENTRESM

AC

HIN

E TO

OLS

Carbon Steel Dead Centres with Draw Off Nut

Morse Taper Draw Off Nut Overall Length List PriceCode Shank Thread (mm) (exc VAT)

CDN Series Standard Point 60º

CDN1 1 M16 x 1.5 90 £18.75

CDN2 2 M22 x 1.5 112 £22.00

CDN3 3 M27 x 1.5 138 £25.50

CDN4 4 M36 x 1.5 175 £38.75

CDN5 5 M48 x 1.5 217 £64.95

CDN6 6 M68 x 1.5 290 £159.80

XCDN Series Extended Point

XCDN2 2 M22 x 1.5 118 £27.85

XCDN3 3 M27 x 1.5 148 £33.00

XCDN4 4 M36 x 1.5 186.5 £50.35

XCDN5 5 M48 x 1.5 242 £66.65

XCDN6 6 M68 x 1.5 330 £206.85

Morse Max Max Weight MaxTaper D d d1 L A B E Rotating Workpiece Runout List Price

Code Shank (mm) (mm) (mm) (mm) (mm) (mm) (mm) Speed(rpm) (Kg) (mm) (exc VAT)

Standard Point – MR Series

MR2 2 32 15 17.78 62 20 37 6,000 200 0.005 £80.00

MR3 3 34 15 23.82 63 20 38 6,000 400 0.005 £98.00

MR4 4 42 20 31.26 76 26 42 6,000 800 0.005 £120.00

MR5 5 58 30 44.39 105 35 62 4,000 1,200 0.008 £189.00

Extended Point – MRC Series

MRC2 2 32 15 17.78 71 29 37 8 6,000 200 0.005 £95.00

MRC3 3 34 15 23.82 73 30 38 8 6,000 400 0.005 £115.00

MRC4 4 42 20 31.26 86 36 42 10 6,000 800 0.005 £140.00

MRC5 5 58 30 44.39 116 46 62 12 4,000 1,200 0.008 £220.00

Revolving Centres

• Reduced body diameter

• Material: carbide tipped

Morse A B D E F List PriceCode Taper (mm) (mm) (mm) (mm) (mm) (exc VAT)

027438 1 12.2 80 7 7.6 22 £54.10

027439 2 18 100 7 11 30 £76.60

027440 3 24.1 125 11 15 38 £86.00

026571 4 31.6 160 14 21 50 £119.10

027441 5 44.7 200 18 29.4 63 £209.50

Type 670 Half Point Carbide Tipped Dead Centres

CENTRES

• Material: carbide tipped

Type 667 Carbide Tipped Dead Centres

Morse l1 A B d1 List Price Code Taper (mm) (mm) (mm) (mm) (exc VAT)

017173 4 57.5 31.6 160 31.267 £101.00

017174 5 70.5 44.7 200 44.399 £176.40

017175 6 88 63.8 270 63.348 £248.10


017169 0 20 9.2 70 9.045 £42.40

017170 1 26.5 12.2 80 12.065 £47.00

017171 2 36 18 100 17.780 £55.70

017172 3 44 24.1 125 23.825 £75.40

• Material: full point tipped carbide

Type 677 Full Carbide Point Dead Centres


221398 4 57.5 31.6 160 31.267 £369.40

326816 5 70.5 44.7 200 44.399 £612.30


326786 2 36 18 100 17.780 £139.30

306402 3 44 24.1 125 23.825 £204.00

Standard Point

Extended Point

THS07_MT10_P550-551 28/3/07 10:12 Page 550

MA

CH

INE

TO

OLS

551

CENTRES

• Material: SS-high speed steel from MT 4 only point in SS

Type 666 High Speed Steel Dead Centres

• Material: WS tool steel

Morse B sw D E F l1 List PriceCode Taper (mm) (mm) (mm) (mm) (mm) (mm) (exc VAT)

249575 2 118 14 10 M22 x 1.5 32 54 £55.90

249576 3 148 19 10 M27 x 1.5 41 67 £65.10

249577 4 186.5 27 14 M36 x 1.5 55 84 £91.60

249578 5 242 36 16 M48 x 1.5 75 112 £132.30

249579 6 330 55 20 M68 x 1.5 100 148 £297.70

Type 672 Extended Point Dead Centres with Draw Off Nut


Morse B sw E F l1 List PriceCode Taper (mm) (mm) (mm) (mm) (mm) (exc VAT)

005361 1 90 10 M16 x 1.5 24 36.5 £32.00

005553 2 112 14 M22 x 1.5 32 48 £36.90

005654 3 138 19 M27 x 1.5 41 57 £42.40

005357 4 175 27 M36 x 1.5 55 72.5 £65.10

005381 5 217 36 M48 x 1.5 75 87.5 £107.00

005426 6 290 55 M68 x 1.5 100 108 £264.60

Type 671 Standard Point Dead Centres with Draw Off Nut

Morse A B l1 List Price Code Taper (mm) (mm) (mm) (exc VAT)

013790 0 9.2 70 20 £30.70

013791 1 12.2 80 26.5 £28.50

013792 2 18 100 36 £41.60

013793 3 24.1 125 44 £59.50


013794 4 31.6 160 57.5 £66.90

013797 5 44.7 200 70.5 £126.80

013799 6 63.8 270 88 £259.10


Type 665 Full Point – Tool Steel Dead Centres


013712 4 31.6 160 57.5 £32.00

013715 5 44.7 200 70.5 £61.00

013718 6 63.8 270 88 £146.70


013706 0 9.2 70 20 £14.90

013707 1 12.2 80 26.5 £12.20

013709 2 18 100 36 £15.50

013711 3 24.1 125 44 £19.20


Type 671 and 672 Draw Off Nuts

Morse List Price Code Taper (exc VAT)

005363 1 £9.40

005555 2 £9.90

005656 3 £12.20

Morse List Price Code Taper (exc VAT)

005359 4 £17.10

005383 5 £29.90

005428 6 £80.40


Morse A B E F l1 List PriceCode Taper (mm) (mm) (mm) (mm) (mm) (exc VAT)

013867 1 12.2 80 7.6 22 26.5 £15.10

013868 2 18 100 11 30 36 £18.20

013870 3 24.1 125 15 38 44 £24.90

013871 4 31.6 160 21 50 57.5 £37.50

013997 5 44.7 200 29.4 63 70.5 £66.20

013999 6 63.8 270 42 79 88 £161.00

Type 668 Half Point Dead Centres

THS07_MT10_P550-551 28/3/07 10:12 Page 551

CENTRES

552

MA

CH

INE

TO

OLS

Morse A B C l1 List Price Code Taper (mm) (mm) (mm) (mm) (exc VAT)

015028 1 12.2 80 10 26.5 £14.70

015032 2 18 100 14 36 £17.40

015039 3 24.1 125 19 44 £23.80

Morse A B C l1 List Price Code Taper (mm) (mm) (mm) (mm) (exc VAT)

015042 4 31.6 160 27 57.5 £38.30

015040 5 44.7 200 36 70.5 £62.90


Type 695 Standard Point Dead Centres with Spanner Flats

Work Piece Concentric SpeedMorse Weight Max Error Max Max/Min A D K List Price

Code Size Taper (Kg) (mm) (rpm) (mm) (mm) (mm) (exc VAT)

043400 101 1 100 0.005 7,000 60.5 15 17 £108.10

043115 102 2 200 0.005 7,000 65 20 24 £108.10

042315 104 3 400 0.005 6,300 70.5 22 27.5 £126.80

042776 106 3 500 0.005 5,000 79.5 25 31 £145.50

042175 108 4 800 0.005 3,800 102.5 32 41 £198.50

042843 110 5 2,000 0.005 3,000 129 40 50.5 £308.70

043532 114 6 3,500 0.01 2,600 152 50 57.5 £562.30

093439 116 6 4,500 0.01 1,500 196 60 67 £837.90

093440 116 80 7,500 0.015 1,500 196 60 68 £1,047.40

Type 604H Heavy Duty Revolving Centre



061740 100 0 10 0.01 15,000 44 10 11 £116.30

043395 101 1 80 0.005 7,000 60.5 15 17 £102.00

043111 102 2 180 0.005 7,000 65 20 24 £103.60

042310 104 3 300 0.005 6,300 70.5 22 27.5 £112.50

042171 108 4 750 0.005 3,800 102.5 32 41 £182.00

042839 110 5 1,800 0.005 3,000 129 40 50.5 £281.2

Type 601N Standard Duty Revolving Centre

Work Piece Concentric Speed List PriceMorse Weight Max Error Max Max/Min A D K (exc VAT)

Code Size Taper (Kg) (mm) (rpm) (mm) (mm) (mm)

082392 102 2 200 0.003 7,000 65 20 24 £143.30

318227 106 3 500 0.003 5,000 82 25 30.5 £198.50

082394 108 4 800 0.003 3,800 102.5 32 41 £209.50

082395 110 5 2,000 0.003 3,000 129 40 50.5 £286.70

Type 604HP High Precision Revolving Centre

Work Piece Concentric SpeedMorse Weight Max Error Max Max/Min A J K List Price


058668 101 1 80 0.01 7,000 70.5 9 27 £121.30

058669 102 2 140 0.005 7,000 75 10 34 £132.30

058670 106 3 400 0.005 5,000 95.5 12 47 £187.40

058671 108 4 500 0.005 3,800 114.5 14 53 £226.10

058672 110 5 1,200 0.005 3,000 143.5 16 65 £341.80

058673 114 6 2,500 0.01 2,600 172.5 18 78 £661.50

Type 604 HVL Extended Point Revolving Centre

THS07_MT10_P552-553 28/3/07 10:13 Page 552

553

MA

CH

INE

TO

OLS

• Has a 1:10 internal taper to accept interchangeable inserts

Workpiece Concentric Weight Approx Morse Weight Max Error A D E Without List Price

Code Size Taper (Kg) Maximum (mm) (mm) (mm) (mm) Inserts (Kg) (exc VAT)

61030 102 2 40 0.01 45 20 4 0.44 £136.70

61031 104 3 130 0.01 48 22 4.5 0.75 £152.60

61032 106 3 150 0.01 55 25 5 1.1 £172.00

61038 108 4 250 0.01 67 32 5 1.9 £231.50

61039 110 5 650 0.01 85 40 6 4.4 £330.80

61040 114 6 900 0.015 101 50 6 8.6 £617.40

Type 614 Interchangeable Revolving Centre

Type 614 Extractor

Size List Price Code (mm) (exc VAT)

061707 102 £9.00

061708 104 £20.20

061708 106 £20.20

Size List Price Code (mm) (exc VAT)

061708-108 108 £20.20

061709-110 110 £21.80

061709-114 114 £21.80



005336 2 2 200 0.005 7,000 62 15 18 £110.30

005429 4 3 400 0.005 7,000 62 15 18 £119.10

005469 8 4 800 0.005 6,300 75.5 20 25 £145.50

005490 10 5 1,600 0.01 4,300 104 30 34 £209.50

005547 14 6 3,500 0.02 3,000 143 42 49 £463.10

Type 600 Small Body Revolving Centre

Work Piece Concentric SpeedMorse Weight Max Error Max Max/Min A J K List Price


362080 2 2 170 0.008 7,000 73 10 29 £130.00

362081 4 3 340 0.008 7,000 74 11 30 £137.00

362082 8 4 700 0.008 6,300 88.5 13 38 £170.90

362083 10 5 1,400 0.01 4,300 119 14 49 £260.20

362084 14 6 3,000 0.02 3,000 164 18 70 £441.00

Type 600-20 Small Body Revolving Centre

CENTRES

A G Approx Weight List PriceCode Size (mm) (mm) (g) (exc VAT)

070725 102 16 20 20 £15.10

070728 104 20 24 45 £16.50

070731 106 24 27.5 60 £18.90

070734 108 28 31.5 215 £22.10

070737 110 38 43 250 £28.70

070740 114 50 54 490 £38.00

60° Inserts

Workpiece Concentric Weight Approx Morse Weight Max Error A D E Without List Price

Code Size Taper (Kg) Maximum (mm) (mm) (mm) (mm) Inserts (Kg) (exc VAT)

61702 102 2 40 0.01 45 20 4 0.44 £385.90

61703 104 3 130 0.01 48 22 4.5 0.75 £463.10

61704 106 3 150 0.01 55 25 5 1.1 £507.20

61705 108 4 250 0.01 67 32 5 1.9 £634.00

61706 110 5 650 0.01 85 40 6 4.4 £790.60

Type 616 Interchangeable Revolving Centre Complete Box Set

THS07_MT10_P552-553 28/3/07 10:13 Page 553

554

CENTRESM

AC

HIN

E TO

OLS

A G D Approx Weight List PriceCode Size (mm) (mm) (mm) (g) (exc VAT)

070719 102 14 25 6 50 £18.00

070720 104 18 30 8 50 £22.10

070720 106 18 30 8 50 £22.10

070721 108 26 43 12 120 £26.50

070722 110 32 55 13 255 £35.10

070723 114 42 70 18.5 560 £61.70

60° Inserts


070726 102 16 17 20 £15.10

070729 104 20 19.5 45 £16.50

070732 106 24 22.5 60 £18.90

070735 108 28 25.5 195 £22.10

070738 110 38 35 215 £28.70

070741 114 50 44 490 £38.00

75° Inserts

G

A

L M N G Approx Weight List PriceCode Size (mm) (mm) (mm) (mm) (g) (exc VAT)

070707 102 25 20 10 18 50 £48.80

070708 104 35 30 15 24 120 £54.50

070709 106 45 40 25 25 175 £65.10

070710 108 55 48 30 30 350 £78.30

070711 110 70 63 40 39 550 £105.80

070712 114 100 90 55 52 1910 £162.10

60° Inserts A for Centreless Workpieces


070727 102 16 14.5 20 £15.10

070730 104 20 16.5 45 £16.50

070733 106 24 19 60 £18.90

070736 108 28 21.5 195 £22.10

070739 110 38 29 215 £28.70

070742 114 50 36 490 £38.00

90° Inserts

G

A

L M N G Approx Weight List PriceCode Size (mm) (mm) (mm) (mm) (g) (exc VAT)

228620 102 16 12 6 12 60 £39.40

228621 104 22 18 10 16 140 £43.10

228621 106 22 18 10 16 140 £43.10

228622 108 40 35 20 25 380 £56.50

308632 110 52 45 30 30 2000 £76.10

60° Inserts B for Centreless Workpieces

60° Insert A for Tubular Workpieces

A G D Approx Weight List PriceCode Size (mm) (mm) (mm) (g) (exc VAT)

070700 102 25 21 10 50 £22.30

070701 104 35 26 15 125 £26.50

070702 106 45 27 25 210 £32.90

070703 108 55 31.5 30 375 £41.70

070704 110 70 39 40 760 £64.80

070705 114 100 52 55 2100 £108.10

THS07_MT10_P554-555 28/3/07 10:14 Page 554

555

MA

CH

INE

TO

OLS

Morse Max List Price Code Taper (rpm) (exc VAT)

7-199-034 4 3000 £140.57

7-199-035 4 - 1 3000 £202.02

7-199-045 5 3000 £243.98

7-199-050 5 - 1 2000 £327.68

7-199-060 6 1000 £800.72

Morse Max List Price Code Taper (rpm) (exc VAT)

7-199-011 1 5000 £77.77

7-199-012 2 5000 £81.65

7-199-013 2 - 1 4500 £105.95

7-199-023 3 4500 £112.52

7-199-024 3 - 1 3000 £164.95

60° Revolving Centres

• Revolving centres for pipes

Morse Concentric List Price Code Taper Error Max (exc VAT)

7-194-015 5 0.010 £141.12

7-194-016 6 0.010 £263.50


7-194-012 2 0.008 £55.56

7-194-013 3 0.008 £66.27

7-194-014 4 0.008 £93.99


• Revolving centre with extended point and standard accuracy


7-200-050 5 0.015 £315.61

7-200-060 6 0.015 £582.07

Revolving Centre Set

• Universal revolving centre set with 6 inserts


7-200-020 2 0.01 £142.90

7-200-030 3 0.01 £182.32

7-200-040 4 0.01 £245.14

CENTRES


7-196-031 1 0.005 Precision £52.97

7-196-032 2 0.003 Precision £62.95

7-196-033 3 0.003 Precision £73.80

7-196-034 4 0.003 Precision £98.44

7-196-035 5 0.005 Precision £146.59

7-196-036 6 0.005 Precision £295.65


7-196-021 1 0.008 Standard £32.65

7-196-022 2 0.008 Standard £44.60

7-196-023 3 0.008 Standard £50.19

7-196-024 4 0.008 Standard £65.79

7-196-025 5 0.010 Standard £102.51

7-196-026 6 0.010 Standard £195.62


• Standard and precision accuracy

Morse Length List Price Code Taper (mm) (exc VAT)

Made from Ball Bearing Steel DIN 806

7-185-005 1 80 £6.16

7-185-010 2 100 £8.04

7-185-015 3 125 £10.18

7-185-020 4 160 £18.85

7-185-025 5 200 £33.26

7-185-030 6 270 £59.13

Morse Length List Price Code Taper (mm) (exc VAT)

Centre Carbide Tipped with Draw Off Nut DIN 807

7-186A010 2 112 £22.37

7-186A015 3 138 £32.08

7-186A020 4 175 £49.03

7-186A025 5 217 £103.47

7-186A030 6 290 £227.90

60° External Dead Centres

7-185

COLLETS & COLLET SETS

• High quality

• Precision made

• 7/16" x 20UNF drawbar tapping

• English (imported available on request)

R8 Collets

Size Size List PriceCode (“) Code (mm) (exc VAT)

3-520-300E 1⁄2 5-530-300E 12 £14.00

3-520-400E 5⁄8 5-530-400E 16 £14.00

3-520-500E 3⁄4 5-530-500E 20 £14.00


3-520-100E 1⁄4 5-530-100E 6 £14.00

3-520-150E 5⁄16 5-530-150E 8 £14.00

3-520-200E 3⁄8 5-530-200E 10 £14.00

THS07_MT10_P554-555 28/3/07 10:14 Page 555

556

COLLETS & COLLET SETSM

AC

HIN

E TO

OLS


3-535-400E 1⁄2 5-536-400E 12 £14.00

3-535-500E 5⁄8 5-536-500E 16 £14.00

3-535-600E 3⁄4 5-536-600E 20 £14.00

3-535-700E 1 5-536-700E 25 £14.00


3-535-100E 1⁄4 5-536-100E 6 £14.00

3-535-200E 5⁄16 5-536-200E 8 £14.00

3-535-300E 3⁄8 5-536-300E 10 £14.00

• 15/16" x 20UNf drawbar thread • English (imported available on request)

5C Collets

• Covers better range due to extra flexibility

• Imperial sizes are also covered by the metriccollets eg 10mm holds all sizes between 9and 10mm including 3/8"

Kit includes:-

• Chuck• 7 Collets• Complete in a blow moulded case

with a wrench

ER Collet Chucks and Collets

ER40

Collet Sizes List PriceCode Shank Tapping Included (exc VAT)

3-583-001 2MT 10mm 4, 6, 8, 10, 12, 14 and 16 £120.00

3-583-051 3MT 10mm 4, 6, 8, 10, 12, 14 and 16 £120.00

3-583-201 40INT 16mm 4, 6, 8, 10, 12, 14 and 16 £130.00

3-582-101 R8 7⁄16" UNF 4, 6, 8, 10, 12, 16 and 20 £120.00

3-582-201 40INT 16mm 4, 6, 8, 10, 12, 16 and 20 £130.00

3-581-101 R8 7⁄16" UNF 6, 8, 10, 12, 16, 20 and 25 £140.00

3-581-201 40INT 16mm 6, 8, 10, 12, 16, 20 and 25 £150.00

Individual sizes available in 1mm increments

LATHE ACCESSORIES

• 5 piece boring bar set contains - 8, 10, 12,16 and 20mm

• Each holder complete with indexable insert


7-521-100 £170.00

Boring Bar Set

• Extremely rigid and precision reading to 0.001"/0.025mm

• Capacity 3/8" to 43/4"/10-120mm

• Holes for boring are 1/2" or 12mm

• Complete with extension bars, boring bars and wrenches

Boring Heads and Shanks

Boring Heads and Tapers

Code Code List PriceImperial Metric Type (exc VAT)

Shanks

3-590-900 3-590-901 3MT £20.00

3-590-910 R8 £20.00

3-590-920 3-590-921 30 INT £25.00

3-590-930 3-590-931 40 INT £30.00

3-590-940 3-590-941 2MT £20.00

List PriceCode Model Description (exc VAT)

Boring Heads

3-590-100 BH120 Imperial £60.00

3-590-101 BH120 Metric £60.00


Taper for BH250 Cont.

3-600-930 3-600-931 50 INT £90.00

3-600-940 R8 £20.00

Taper for BH300

3-615-900 3-615-901 30 INT £40.00

3-615-910 3-615-911 40 INT £50.00

3-615-920 3-615-921 50 INT £90.00

3-615-930 R8 £40.00

Capacity List PriceCode Model (") (mm) (exc VAT)

Boring Heads

3-600-100 BH 250 10 16 £198.00

3-600-200 BH 300 12 18 £275.00


Taper for BH250

3-600-900 3-600-901 3MT £20.00

3-600-910 3-600-911 30 INT £25.00

3-600-920 3-600-921 40 INT £30.00

THS07_MT10_P556-557 28/3/07 10:15 Page 556

MA

CH

INE

TO

OLS

LATHE ACCESSORIES

LATHE ACCESSORIES

Tailstock

• For use with horizontal and vertical indexing units

Morse Centre List Price Code Taper Height (mm) (exc VAT)

7-294-100 - 100 £286.86

7-294-125 2 125 £314.11

Morse Centre List Price Code Taper Height (mm) (exc VAT)

7-294-160 3 160 £355.02

7-294-200 4 200 £426.89

7-294-250 4 250 £493.55

Dimensions List PriceCode (mm) (") (exc VAT)

TJ123V 7.93 x 1.6 x 89 5⁄16 x 1⁄16 x 31⁄2 £12.60

TJ425P 12.7 x 1.6 x 114 1⁄2 x 1⁄16 x 41⁄2 £14.17

TJ445T 12.7 x 2.4 x 114 1⁄2 x 3⁄32 x 41⁄2 £16.38

TJ465G 12.7 x 3.2 x 114 1⁄2 x 1⁄8 x 41⁄2 £18.80


TJ726K 17.46 x 2.4 x 127 11⁄16 x 3⁄32 x 5 £21.53

TJ746C 17.46 x 3.2 x 127 11⁄16 x 1⁄8 x 5 £23.53

TJ766J 17.46 x 4 x 127 11⁄16 x 5⁄32 x 5 £26.36

557

• 3 feed rates of 0.02-0.12mm

• Dial calibration 0.01mm

• Boring head accepts 18mm diameter tools

• Offset of head is 15mm

• Complete with boring bars, extension bars,boring tools, allen keys, stop rod and boringbar holder


Tapers for UBFH 250

3-615-900 3-615-901 30 INT £40.00

3-615-910 3-615-911 40 INT £50.00

3-615-920 3-615-921 50 INT £90.00

3-615-930 R8 £40.00

Universal Boring and Facing Heads – UBFH


Boring Heads

3-615-100 £675.00

9 Piece Turning Tool Holders Set

Shank Size List Price Code (mm) (exc VAT)

7-520-420 20 £139.00

7-520-425 25 £195.00

7-520-432 32 £205.00

Shank Size List Price Code (mm) (exc VAT)

7-520-410 10 £89.00

7-520-412 12 £99.00

7-520-416 16 £124.00

Carbide Tipped Boring Bar Set

Shank No of Pieces List PriceCode Diameter (mm) Per Set (exc VAT)

3-620-001 10 9 £19.00

3-620-101 12 9 £29.00

3-620-151 16 12 £39.00

3-620-201 18 12 £49.00

Shank No of Pieces List PriceCode Diameter (") Per Set (exc VAT)

3-620-000 3⁄8 9 £19.00

3-620-100 1⁄2 9 £29.00

3-620-150 5⁄8 12 £39.00

3-620-200 3⁄4 12 £49.00

TURNING

• Bevel section accurately ground with clearance angle at cutting edge

Cutting Off/Lathe Tools and Holders


TH325M 12.70 x 2.4 x 114 1⁄2 x 3⁄32 x 41⁄2 £13.85

TH750R 22.23 x 3.2 x 178 7⁄8 x 1⁄8 x 7 £35.71

TH912T 25.4 x 4.8 x 203 1 x 3⁄16 x 8 £52.42


TH466F 15.87 x 2.4 x 127 5⁄8 x 3⁄32 x 5 £18.69

TH628V 19.50 x 3.2 x 153 3⁄4 x 1⁄8 x 6 £27.41

Hollow Ground Cutting Off Tools

THS07_MT10_P556-557 28/3/07 10:15 Page 557

558

TURNINGM

AC

HIN

E TO

OLS

MILLING ACCESSORIES

• All holders include a clamp designed to ensure tools are held securely and rigidly

Cutting Off Tool and Holders


633S 8 5⁄16 £74.16

653S 12.7-16 1⁄2-5⁄8 £80.68

673S 19-22.2 3⁄4-7⁄8 £119.34

693S 25.4-28.5 1-11⁄8 £203.81


E420 6.5 1⁄4 £101.05

E430 9.5 3⁄8 £160.73

Lathe Tool Sets

Lathe Tools

List Price Code Description (exc VAT)

E421 Roughing £12.28

E422 Finishing £13.97

E423 Parting £15.95

E424 External threading £17.12

E425 Boring £18.80

E426 Internal threading £18.90

List Price Code Description (exc VAT)

E431 Roughing £23.00

E432 Finishing £24.68

E433 Parting £25.94

E434 External threading £27.41

E435 Boring £27.62

E436 Internal threading £27.51

• Made from H5 cobalt HSS

• The shank is ground on the underside toprovide a flat surface or ease of setting andto ensure rigidity

• The ends are ground ready for use

Boring Bars

Dimensions List Price Code (mm) (") (exc VAT)

TK105B 5 x 114 3⁄16 x 41⁄2 £9.13

TK146C 6.5 x 127 1⁄4 x 5 £12.17

TK188P 8 x 153 5⁄16 x 6 £17.64

TK230J 9.5 x 178 3⁄8 x 7 £21.85

E422

673S

E420

TK105B

E426

E434

• Swivel head can be locked at any angle from10° below horizontal to 90° vertical

• 24 hole dividing plates for fast directindexing on numbers 2, 3, 4, 6, 8, 12 and 24

• Threaded spindle nose for chuck back plate,spindle is 11/2" diameter x 8TPI

• Complete with head, adjustable tailstock, 3 indexing plates, centre and threaded backplate fitted to chuck

Dividing Heads Semi-Universal

Centre Height Diameter of Taper of List PriceCode Model (mm) Spindle Hole(mm) Center (mm) (exc VAT)

2-100-100 BS0 100 18 B & S No 7 £395.00

2-100-200 BS1 128 20 B & S No 9 £525.00

Contents:-

• 24 pieces of studs – 4 of each length 3", 4",5" 6" 7" and 8"

• 6 pieces of T-nuts• 4 pieces of coupling nuts• 12 pieces (6 pairs) of step blocks• 6 pieces of flange nuts• 6 pieces of step clamps

58 Piece Clamp Kits

List PriceCode T-Slot Stud Size (exc VAT)

3-100-100 1⁄2" 3⁄8" 16NC £50.00

3-100-100M 12mm 10mm £50.00

3-100-200 5⁄8" 1⁄2" 13NC £55.00

3-100-200M 14mm 12mm £55.00

3-100-300 3⁄4" 5⁄8" 11NC £65.00

3-100-300M 18mm 16mm £65.00

THS07_MT10_P558-559 28/3/07 10:16 Page 558

MA

CH

INE

TO

OLS

559

MILLING ACCESSORIES

• Made from case hardened steel for strength

• Equipped with a spring clip and a retainingring which holds the loose jaw in placewhen clamp is being adjusted

Toolmakers Clamp


FAITMC114 32 11⁄4 £4.21

FAITMC134 44 13⁄4 £4.68

FAITMC214 56 21⁄4 £6.50

FAITMC234 70 23⁄4 £8.47

TOOLPOSTS

Toolposts

Body

Standard Holders Part Off Holders

• Bodies only, (available as sets withtoolholders, ask for details)

• Bodies supplied with all clamp bolts, clamp pads, flange washer and location pin (except T00M)

List PriceCode Type L x W x H (mm) (exc VAT)

7-275-000M T00M Myford 58 x 58 x 37 £97.81

7-275-000B T00B Boxford 58 x 58 x 42 £103.61

7-279-000 T0 73 x 73 x 51 £144.14

7-279-010 T1 73 x 73 x 63.5 £158.91

7-279-010X T1X 73 x 73 x 73 £163.84

7-279-020 T2 98.5 x 98.5 x 71.5 £203.26

7-279-020T T2T 106.5 x 106.5 x 76 £222.97

7-279-030 T3 125.5 x 125.5 x 92 £295.77

7-279-030X T3HX 125.5 x 125.5 x 108 £314.25

List PriceCode Type (exc VAT)

7-277-001M T00M / T00B £28.34

7-278-006 T0 £40.05

7-278-011 T1 / T1X £55.19

7-278-021 T2 £64.19

7-278-021T T2T £66.40

7-278-031 T3 / T3HX £81.45

Plain Bore Holders

Morse Taper Holders

Vee Holders

List PriceCode Type (exc VAT)

7-277-003M T00M / T00B £33.11

7-278-013 T0 / T1 / T1X £67.01

7-278-023 T2 / T2T £86.85

7-278-033 T3 / T3HX £101.51

Bore Ø List PriceCode Type (mm/") (exc VAT)

7-278-026 T0 / T1 / T1X 19/3⁄4 £103.81

7-278-027 T2 / T2T 25.4/1 £96.21

7-278-037 T3 / T3HX 38.1/11⁄2 £116.42

2-278M025 T0 / T1 / T1X 25 £99.96

2-278M032 T2 / T2T 32 £110.57

2-278-040 T3 / T3HX 40 £116.42

Max Ø List PriceCode Type (mm) (exc VAT)

7-277-002M T00M / T00B 11 £32.28

7-278-007 T0 16 £44.24

7-278-012 T1 / T1X 16 £60.00

7-278-022 T2 19 £69.47

7-278-022T T2T 19 £71.82

7-278-032 T3 / T3HX 25.5 £86.55

Morse List PriceCode Type Taper (exc VAT)

7-278-008 T0 1 £58.29

7-278-014 T1 / T1X 1 £73.36

7-278-024 T2 / T2T 2 £96.21

7-278-034 T3 / T3HX 3 £116.42

Standard Holders

Plain Bore Holders

THS07_MT10_P558-559 28/3/07 10:16 Page 559

560

MA

CH

INE

TO

OLS

BANDSAW BLADES

List Price (exc VAT)Nominal Width and Thickness

Length up to 19 x 0.9mm 27 x 0.9mm 34 x 1.1mm(') (M) 3⁄4" x .035 1" x .035 11⁄4" x .042

Broadband®

10'6" 3.20 £45.98 £50.03

11' 3.35 £47.83 £52.06

11'6" 3.51 £49.65 £54.08

12' 3.66 £51.50 £56.12 £70.30

12'6" 3.81 £53.34 £58.16 £72.88

13' 3.96 £55.19 £60.18 £75.46

13'6" 4.11 £57.03 £62.21 £78.06

14' 4.27 £58.82 £64.24 £80.65

14'6" 4.42 £60.71 £66.27 £83.23

15' 4.57 £62.55 £68.29 £85.83

15'6" 4.72 £64.39 £70.33 £88.41

16' 4.88 £66.23 £72.35 £90.99

16'6" 5.03 £68.07 £74.38 £93.58

17' 5.18 £69.92 £76.41 £96.18

17'6" 5.33 £71.76 £78.44 £98.75

18' 5.49 £73.61 £80.46 £101.36

18'6" 5.64 £75.44 £82.50 £103.94

19' 5.79 £77.28 £84.51 £106.54

19'6" 5.94 £79.12 £86.55 £109.13

20' 6.10 £80.97 £88.58 £111.72

20'6" 6.25 £82.80 £90.60 £114.30

21' 6.40 £84.65 £92.63 £116.90

21'6" 6.55 £86.49 £94.67 £119.48

22' 6.70 £88.34 £96.68 £122.07

22'6" 6.86 £90.17 £98.72 £124.66

23' 7.01 £92.01 £100.75 £127.25

23'6" 7.16 £93.85 £102.77 £129.83

24' 7.32 £95.70 £104.80 £132.43

List Price (exc VAT)Nominal Width and Thickness

Length up to 41 x 1.3mm 52 x 1.6mm 67 x 1.6mm(') (M) 11⁄2" x .050 2" x .062 25⁄8" x .062

Blockbuster®

15' 4.57 £96.57

15'6" 4.72 £99.44

16' 4.88 £102.35

16'6" 5.03 £105.23

17' 5.18 £108.15

17'6" 5.33 £111.08

18' 5.49 £113.98

18'6" 5.64 £122.14

19' 5.79 £119.78 £172.08

19'6" 5.94 £122.69 £176.24

20' 6.10 £125.59 £180.40

20'6" 6.25 £128.49 £184.54

21' 6.40 £131.40 £188.71

21'6" 6.55 £134.30 £192.86

22' 6.70 £137.20 £197.02

22'6" 6.86 £140.10 £201.19

23' 7.01 £143.00 £205.35

23'6" 7.16 £145.91 £209.51

24' 7.32 £148.82 £213.66 £254.33

24'6" 7.47 £151.71 £217.80 £259.20

25' 7.62 £154.61 £221.99 £264.09

25'6" 7.77 £157.51 £226.13 £268.98

26' 7.92 £160.42 £230.30 £273.85

26'6" 8.08 £163.32 £234.44 £278.73

27' 8.23 £166.23 £233.36 £283.61

27'6" 8.38 £169.12 £242.76 £288.48

28' 8.53 £172.03 £246.93 £293.34

28'6" 8.69 £174.93 £251.10 £298.22

Bi-Metal Tooth Pitch Selection Guide

= Wall thickness

ToothSelection Blade

• 1.5+ 10/4 BroadbandBelow mm 8/12

• 1.5 to 8/12 IC Enduro5 mm 6/10

• 5 to 6/10 Broadband10mm 5/8

• 10 to 3/4 / 4-6 IC Enduro19mm

• L up to 5/8 Broadband/200mm 4/6 IC Enduro

• L up to 3/4 Broadband/250mm IC Enduro

• L above 2/3 Broadband/250mm IC Enduro

ToothSelection Blade

• up to 5/8 Broadband50mm

• 50- to 4/6 Broadband100mm

• 100- to 3/4 Broadband/200mm Blockbuster

• 200- to 3-4/ Broadband/200mm 2-3 Blockbuster

• 300+ 1.5- 1.9/ Blockbuster/GTmm 1.1- 1.4/

• 500+ 0.8- 1 Blockbuster/GTmm SI Clone for Stainless

SolidBlock

SolidBar

Broadband - General Steels

SI Clone - Stainless Steel

IC Enduro -

Bundle Cutting

Blockbuster - Production

Cutting

Carbide - Foundaries/

Super Alloys

Special Applications

(In Inches)

Height or Diameter of Cut

Chip Load =

Multiply By = To Get/ By = To Get

Multipy

Inches x 25.4 = Millimeters x .03937 = Inches

Feet x .3048 = Metres x 3.281 = Feet

Inches x 645.16 = Millimeters x .00155 = Inches

Inches x 6.452 = Centimeters x .155 = Inches

Inches x .746 = Kilowatts x 1.34 = Horsepower

Feet/Min. x .3048 = Metres/Min. x 3.281 = Feet/Min.

12 (Bond Speed)

(F.P.M.)

(Cutting Time)

(Min.)

(Average Pitch

Length) (Inches)

• Wide range of toothpitches available

Applications:

• Steel service centres, mediumand large manufacturers,fabricators, maintenanceshops, job shops and tooland die shops

Materials:

• Carbon steel, chrome steel,tool steel, die steel, stainlesssteel, nickel base steel,stuctrals, pipe and tube andmixed metal applications

BroadBand®

• Wide range of toothpitches available on request

Applications:

• Production and generalpurpose cutting in steelservice centres

Materials:

• Carbon steel, chrome steel,tool steel, die steel,stainless steel and nickelbase alloys

Blockbuster®

Bandsaw Coils - 250’ coils available in M42 Broadband, M42 Blockbuster, Carbide and Carbon on request

THS07_MT10_P560-561 28/3/07 10:17 Page 560

561

MA

CH

INE

TO

OLS

BLADES

• Ultimate competitor in bi-metal bandsawblades, providing a universal solution withoptimum efficiency in large productioncutting operations

• Blades welded to specific lengths are alsoavailable

• A high speed steel M42 cutting edge,incorporating a new tooth design with apositive rake angle and variable pitch,combine to give Powerband Gladiator theutmost in cutting performance and costeffectiveness

Gladiator - Bi-Metal Bandsaw Coils

Nominal Blade Price Per Width x Thickness Teeth Per 30M/100ft(mm) (") 25mm/Inch (exc VAT)

Gladiator – Bi-Metal Band Saws

6 x 0.65 1⁄4 x 0.025 10-14 £318.41

6 x 0.65 1⁄4 x 0.025 14-18 £318.41

6 x 0.90 1⁄4 x 0.035 10-14 £335.91

6 x 0.90 1⁄4 x 0.035 14-18 £335.91

10 x 0.65 3⁄8 x 0.025 8-12 £337.07

10 x 0.65 3⁄8 x 0.025 10-14 £337.07

10 x 0.65 3⁄8 x 0.025 14-18 £337.07

10 x 0.90 3⁄8 x 0.035 8-12 £353.40

10 x 0.90 3⁄8 x 0.035 10-14 £353.40

10 x 0.90 3⁄8 x 0.035 14-18 £353.40

13 x 0.65 1⁄2 x 0.025 6-10 £369.73

13 x 0.90 1⁄2 x 0.035 6-10 £387.64

13 x 0.65 1⁄2 x 0.025 8-12 £369.73

13 x 0.65 1⁄2 x 0.025 10-14 £369.73

13 x 0.65 1⁄2 x 0.025 14-18 £POA

13 x 0.90 1⁄2 x 0.035 8-12 £387.64

13 x 0.90 1⁄2 x 0.035 10-14 £387.64

19 x 0.90 3⁄4 x 0.035 3-4 £402.39

19 x 0.90 3⁄4 x 0.035 4-6 £402.39

19 x 0.90 3⁄4 x 0.035 5-8 £402.39

19 x 0.90 3⁄4 x 0.035 6-10 £402.39

19 x 0.90 3⁄4 x 0.035 8-12 £402.73

19 x 0.90 3⁄4 x 0.035 10-14 £402.73

27 x 0.90 1 x 0.035 2-3 £425.72

27 x 0.90 1 x 0.035 3-4 £425.72

27 x 0.90 1 x 0.035 4-6 £425.72

Nominal Blade Price Per Width x Thickness Teeth Per 30M/100ft(mm) (") 25mm/Inch (exc VAT)

27 x 0.90 1 x 0.035 5-8 £425.72

27 x 0.90 1 x 0.035 6-10 £425.72

27 x 0.90 1 x 0.035 8-12 £425.72

27 x 0.90 1 x 0.035 10-14 £425.72

34 x 1.10 11⁄4 x 0.042 1.4-2 £542.36

34 x 1.10 11⁄4 x 0.042 2-3 £542.36

34 x 1.10 11⁄4 x 0.042 3-4 £542.36

34 x 1.10 11⁄4 x 0.042 4-6 £542.36

34 x 1.10 11⁄4 x 0.042 5-8 £542.36

34 x 1.10 11⁄4 x 0.042 6-10 £542.36

41 x 1.30 11⁄2 x 0.050 1.4-2 £646.16

41 x 1.30 11⁄2 x 0.050 2-3 £646.16

41 x 1.30 11⁄2 x 0.050 3-4 £646.16

41 x 1.30 11⁄2 x 0.050 4-6 £646.16

41 x 1.30 11⁄2 x 0.050 5-8 £646.16

54 x 1.30 2 x 0.050 1.4-2 £927.25

54 x 1.30 2 x 0.050 2-3 £927.25

54 x 1.30 2 x 0.050 3-4 £927.25

54 x 1.60 2 x 0.063 1.4-2 £1,001.89

54 x 1.60 2 x 0.063 2-3 £1,001.89

54 x 1.60 2 x 0.063 3-4 £1,001.89

54 x 1.60 2 x 0.063 4-6 £1,001.89

67 x 1.60 25⁄8 x 0.063 0.8-1.3 £1,175.68

67 x 1.60 25⁄8 x 0.063 1.4-2 £1,175.68

80 x 1.60 31⁄8 x 0.063 0.8-1.3 £1,572.24

80 x 1.60 31⁄8 x 0.063 1.4-2 £1,572.24

• Designed specifically for structural steels andinterrupted cuts

• New tooth design ensures superbperformance and product life

• Gladiator tooth shape


Emperor Bi-Metal Bandsaw Coils

Nominal Blade Teeth Price per Width x Thickness Pitch 30M/100ft(mm) (") 25mm/Inch (exc VAT)

54 x 1.3 2 x 0.050 2-3 £927.25

54 x 1.3 2 x 0.050 3-4 £927.25

54 x 1.3 2 x 0.050 4-6 £927.25

54 x 1.6 2 x 0.063 2-3 £1,001.89

54 x 1.6 2 x 0.063 3-4 £1,001.89

67 x 1.6 2 5⁄8 x 0.063 2-3 £1,175.68

67 x 1.6 2 5⁄8 x 0.063 3-4 £1,175.68

Nominal Blade Teeth Price per Width x Thickness Per 30M/100ft(mm) (") 25mm/Inch (exc VAT)

27 x 0.90 1 x 0.035 5-8 £425.72

34 x 1.1 1 1⁄4 x 0.042 2-3 £542.36

34 x 1.1 1 1⁄4 x 0.042 3-4 £542.36

34 x 1.1 1 1⁄4 x 0.042 4-6 £542.36

41 x 1.3 1 1⁄2 x 0.050 2-3 £646.16

41 x 1.3 1 1⁄2 x 0.050 3-4 £646.16

41 x 1.3 1 1⁄2 x 0.050 4-6 £646.16

THS07_MT10_P560-561 28/3/07 10:17 Page 561

562

MA

CH

INE

TO

OLS

BLADES

• Recommended for general purpose cuttingat an attractive cost on easy-to-machinematerials

• Excellent fatigue endurance to give long lifeon machines running at a high surface feet per minute


Super Flex-Back Bandsaw Coils

Nominal Blade Price PerTeeth Per Width x Thickness Tooth 30M/100ft

Code 25mm/Inch (mm) (") Shape (exc VAT)

AJ320 14 3 x 0.65 1⁄8 x 0.025 Regular £112.96

AJ325 18 3 x 0.65 1⁄8 x 0.025 Regular £112.96

AJ335 24 3 x 0.65 1⁄8 x 0.025 Wavy £112.96

AJ420 6 5 x 0.65 3⁄16 x 0.025 Skip £88.67

AJ435 10 5 x 0.65 3⁄16 x 0.025 Regular £88.67

AJ440 14 5 x 0.65 3⁄16 x 0.025 Regular £88.67

AJ445 18 5 x 0.65 3⁄16 x 0.025 Regular £88.67

AJ450 24 5 x 0.65 3⁄16 x 0.025 Regular £88.67

AJ515 6 6 x 0.35 1⁄4 x 0.014 Skip £73.77

AJ525 10 6 x 0.35 1⁄4 x 0.014 Regular £73.77

AJ535 14 6 x 0.35 1⁄4 x 0.014 Regular £73.77

AJ555 4 6 x 0.65 1⁄4 x 0.025 Hook £67.10

AJ565 4 6 x 0.65 1⁄4 x 0.025 Skip £67.10

AJ570 6 6 x 0.65 1⁄4 x 0.025 Hook £67.10

AJ580 6 6 x 0.65 1⁄4 x 0.025 Skip £67.10

AJ585 10 6 x 0.65 1⁄4 x 0.025 Regular £67.10

AJ600 14 6 x 0.65 1⁄4 x 0.025 Regular £67.10

AJ605 18 6 x 0.65 1⁄4 x 0.025 Regular £67.10

AJ615 24 6 x 0.65 1⁄4 x 0.025 Regular £67.10

AJ685 10 8 x 0.65 5⁄16 x 0.025 Regular £69.37

AJ690 14 8 x 0.65 5⁄16 x 0.025 Regular £69.37

AJ695 18 8 x 0.65 5⁄16 x 0.025 Regular £69.37

AJ760 6 10 x 0.35 3⁄8 x 0.014 Skip £76.26

AJ765 14 10 x 0.35 3⁄8 x 0.014 Regular £76.26

AJ780 3 10 x 0.65 3⁄8 x 0.025 Hook £69.37

AJ790 3 10 x 0.65 3⁄8 x 0.025 Skip £69.37

AJ795 4 10 x 0.65 3⁄8 x 0.025 Hook £69.37

AJ805 4 10 x 0.65 3⁄8 x 0.025 Skip £69.37

AJ815 6 10 x 0.65 3⁄8 x 0.025 Hook £69.37

AJ825 6 10 x 0.65 3⁄8 x 0.025 Skip £69.37

AJ830 8 10 x 0.65 3⁄8 x 0.025 Regular £69.37

AJ835 10 10 x 0.65 3⁄8 x 0.025 Regular £69.37

AJ845 14 10 x 0.65 3⁄8 x 0.025 Regular £69.37

AJ850 18 10 x 0.65 3⁄8 x 0.025 Regular £69.37

AJ855 24 10 x 0.65 3⁄8 x 0.025 Regular £69.37

AJ925 14 13 x 0.35 1⁄2 x 0.014 Regular £81.24

AJ930 3 13 x 0.65 1⁄2 x 0.025 Hook £73.88

Nominal Blade Price PerTeeth Per Width x Thickness Tooth 30M/100ft

Code 25mm/Inch (mm) (") Shape (exc VAT)

AJ945 3 13 x 0.65 1⁄2 x 0.025 Skip £73.88

AJ950 4 13 x 0.65 1⁄2 x 0.025 Hook £73.88

AJ960 4 13 x 0.65 1⁄2 x 0.025 Skip £73.88

AJ970 6 13 x 0.65 1⁄2 x 0.025 Hook £73.88

AJ985 6 13 x 0.65 1⁄2 x 0.025 Skip £73.88

AJ980 6 13 x 0.65 1⁄2 x 0.025 Regular £73.88

AJ990 8 13 x 0.65 1⁄2 x 0.025 Regular £73.88

AJ995 10 13 x 0.65 1⁄2 x 0.025 Regular £73.88

AK015 14 13 x 0.65 1⁄2 x 0.025 Regular £73.88

AK025 18 13 x 0.65 1⁄2 x 0.025 Regular £73.88

AK035 24 13 x 0.65 1⁄2 x 0.025 Regular £73.88

AK110 3 16 x 0.80 5⁄8 x 0.032 Skip £96.34

AK115 4 16 x 0.80 5⁄8 x 0.032 Skip £96.34

AK125 6 16 x 0.80 5⁄8 x 0.032 Skip £96.34

AK130 8 16 x 0.80 5⁄8 x 0.032 Regular £96.34

AK140 10 16 x 0.80 5⁄8 x 0.032 Regular £96.34

AK155 14 16 x 0.80 5⁄8 x 0.032 Regular £96.34

AK165 18 16 x 0.80 5⁄8 x 0.032 Regular £96.34

AK245 3 20 x 0.80 3⁄4 x 0.032 Hook £109.36

AK255 3 20 x 0.80 3⁄4 x 0.032 Skip £109.36

AK270 4 20 x 0.80 3⁄4 x 0.032 Skip £109.36

AK280 6 20 x 0.80 3⁄4 x 0.032 Regular £109.36

AK290 8 20 x 0.80 3⁄4 x 0.032 Regular £109.36

AK300 10 20 x 0.80 3⁄4 x 0.032 Regular £109.36

AK315 14 20 x 0.80 3⁄4 x 0.032 Regular £109.36

AK325 18 20 x 0.80 3⁄4 x 0.032 Wavy £109.36

AK400 3 25 x 0.90 1 x 0.035 Hook £138.33

AK415 3 25 x 0.90 1 x 0.035 Skip £138.33

AK435 4 25 x 0.90 1 x 0.035 Skip £138.33

AK430 4 25 x 0.90 1 x 0.035 Regular £138.33

AK445 6 25 x 0.90 1 x 0.035 Regular £138.33

AK450 8 25 x 0.90 1 x 0.035 Regular £138.33

AK455 10 25 x 0.90 1 x 0.035 Regular £138.33

AK465 14 25 x 0.90 1 x 0.035 Regular £138.33

• Ideal for high speed cutting of all types of fresh or frozen meat or fish with orwithout bone

• The blades feature, ground teeth for faster,more accurate cuts, long blade life andminimal wastage


Meatkutter and Carcasskutter

Nominal Blade Price PerTeeth Per Tooth Width x Thickness 30M/100 ft25mm/Inch Shape (mm) (") (exc VAT)

Meatkutter Premium Coil

3 Hook 13 x 0.55 1⁄2 x 0.022 £72.81

4 Hook 13 x 0.55 1⁄2 x 0.022 £72.81

3 Hook 16 x 0.55 5⁄8 x 0.022 £94.94

4 Hook 16 x 0.55 5⁄8 x 0.022 £94.94

3 Hook 19 x 0.55 3⁄4 x 0.022 £107.76

4 Hook 19 x 0.55 3⁄4 x 0.022 £107.76

8 Regular 19 x 0.55 3⁄4 x 0.022 £107.76

Meatkutter Stainless Steel Coil Stock

4 Hook 16 x 0.45 5⁄8 x 0.018 £101.62

Carcasskutter Coil Stock

4 Hook 19 x 0.55 3⁄4 x 0.022 £115.20

THS07_MT10_P562-563 28/3/07 10:19 Page 562

563

MA

CH

INE

TO

OLS

HACKSAW BLADES

• Comprehensive range will suit virtually allpopular sawing machines

• A choice of All Hard HSS or Bi-Metal HSSblades with a wide range of sizes and toothpitch to cater for all varieties of materialsand thicknesses

Universal Bi-Metal Power Hacksaw Blades

List PriceBlade Size Blade Size Teeth Per Per 10

Code (") (mm) 25mm/Inch (exc VAT)

Bi-Metal HSS

AA203K 12 x 1 x 0.050 300 x 25 x 1.25 10 £72.94

AA204C 12 x 1 x 0.050 300 x 25 x 1.25 14 £72.94

AA223C 14 x 1 x 0.050 350 x 25 x 1.25 10 £84.97

AA224J 14 x 1 x 0.050 350 x 25 x 1.25 14 £84.97

AA342X 14 x 11⁄4 x 0.062 350 x 32 x 1.60 6 £115.71

AA343K 14 x 11⁄4 x 0.062 350 x 32 x 1.60 10 £115.71

AA352V 16 x 11⁄4 x 0.062 400 x 32 x 1.60 6 £132.27

AA353R 16 x 11⁄4 x 0.062 400 x 32 x 1.60 10 £132.27

AA462B 16 x 11⁄2 x 0.075 400 x 38 x 2 6 £186.76

AA463X 16 x 11⁄2 x 0.075 400 x 38 x 2 10 £186.76

AA372R 18 x 11⁄4 x 0.062 450 x 32 x 1.60 6 £150.12

AA373H 18 x 11⁄4 x 0.062 450 x 32 x 1.60 10 £150.12

AA472E 18 x 11⁄2 x 0.075 450 x 38 x 2 6 £210.28

AA473V 18 x 11⁄2 x 0.075 450 x 38 x 2 10 £210.28

AA482X 20 x 11⁄2 x 0.075 500 x 38 x 2 6 £274.09

AA492V 21 x 11⁄2 x 0.075 525 x 38 x 2 6 £278.05

AA542L 21 x 13⁄4 x 0.088 525 x 45 x 2.25 6 £313.57

Bi-Metal Suitable for use with Kasto Machines

AA969N 18 x 11⁄2 x 0.075 450 x 38 x 2 4 £230.67

AA970L 18 x 11⁄2 x 0.075 450 x 38 x 2 6 £230.67

AA972B 18 x 11⁄2 x 0.075 450 x 38 x 2 10 £230.67

AA973X 20 x 2 x 0.100 500 x 50 x 2.5 4 £417.41

AA974K 20 x 2 x 0.100 500 x 50 x 2.5 6 £417.41

AA979P 22 x 2 x 0.100 550 x 50 x 2.5 4 £455.55

AA982E 23 x 2 x 0.100 575 x 50 x 2.5 4 £476.03

AA997D 28 x 2 x 0.100 700 x 50 x 2.5 4 £593.18

AA998P 28 x 2 x 0.100 700 x 50 x 2.5 6 £593.18

All Hard HSS

AE144N 12 x 5⁄8 x 0.032 300 x 16 x 0.80 14 £33.37

AE145L 12 x 5⁄8 x 0.032 300 x 16 x 0.80 18 £33.37

AE146W 12 x 5⁄8 x 0.032 300 x 16 x 0.80 24 £33.37

AE203V 12 x 1 x 0.050 300 x 25 x 1.25 10 £70.83

AE204R 12 x 1 x 0.050 300 x 25 x 1.25 14 £70.83

AE222B 14 x 1 x 0.050 350 x 25 x 1.25 6 £82.25

AE223R 14 x 1 x 0.050 350 x 25 x 1.25 10 £82.25

AE224H 14 x 1 x 0.050 350 x 25 x 1.25 14 £82.25

AE342E 14 x 11⁄4 x 0.062 350 x 32 x 1.60 6 £113.86

AE343V 14 x 11⁄4 x 0.062 350 x 32 x 1.60 10 £113.86

AE344R 14 x 11⁄4 x 0.062 350 x 32 x 1.60 14 £113.86

AE452W 14 x 11⁄2 x 0.075 350 x 38 x 2 6 £175.51

AE243H 16 x 1 x 0.050 400 x 25 x 1.25 10 £94.62

AE244M 16 x 1 x 0.050 400 x 25 x 1.25 14 £94.62

AE352X 16 x 11⁄4 x 0.062 400 x 32 x 1.60 6 £129.04

AE353K 16 x 11⁄4 x 0.062 400 x 32 x 1.60 10 £129.04

AE354C 16 x 11⁄4 x 0.062 400 x 32 x 1.60 14 £129.04

AE461T 16 x 11⁄2 x 0.075 400 x 38 x 2 4 £182.25

AE462G 16 x 11⁄2 x 0.075 400 x 38 x 2 6 £182.25

AE263M 17 x 1 x 0.050 425 x 25 x 1.25 10 £121.57

AE264F 17 x 1 x 0.050 425 x 25 x 1.25 14 £121.57

AE362V 17 x 11⁄4 x 0.062 425 x 32 x 1.60 6 £151.87

AE363R 17 x 11⁄4 x 0.062 425 x 32 x 1.60 10 £151.87

AE372K 18 x 11⁄4 x 0.062 450 x 32 x 1.60 6 £146.77

AE373C 18 x 11⁄4 x 0.062 450 x 32 x 1.60 10 £146.77

AE471W 18 x 11⁄2 x 0.075 450 x 38 x 2 4 £205.19

AE472B 18 x 11⁄2 x 0.075 450 x 38 x 2 6 £205.19

AE512M 18 x 13⁄4 x 0.088 450 x 45 x 2.25 6 £263.96

THS07_MT10_P562-563 28/3/07 10:19 Page 563

564

MA

CH

INE

TO

OLS

HACKSAW BLADES

Universal Bi-Metal Power Hacksaw Blades

List PriceCode Blade Size Blade Size Teeth Per Per Pack 10

(") (mm) 25mm/Inch (exc VAT)

All Hard HSS Continued

AE522A 19 x 13⁄4 x 0.088 475 x 45 x 2.25 6 £278.85

AE482E 20 x 11⁄2 x 0.075 500 x 38 x 2 6 £263.02

AE492X 21 x 11⁄2 x 0.075 525 x 38 x 2 6 £263.75

AE493K 21 x 11⁄2 x 0.075 525 x 38 x 2 10 £263.75

AE541A 21 x 13⁄4 x 0.088 525 x 45 x 2.25 4 £307.50

AE542D 21 x 13⁄4 x 0.088 525 x 45 x 2.25 6 £307.50

AE622C 22 x 2 x 0.100 550 x 50 x 2.50 6 £443.36

AE631R 23 x 2 x 0.100 575 x 50 x 2.50 4 £451.52

AE632H 23 x 2 x 0.100 575 x 50 x 2.50 6 £451.52

AE561D 24 x 13⁄4 x 0.088 600 x 45 x 2.25 4 £387.28

AE562P 24 x 13⁄4 x 0.088 600 x 45 x 2.25 6 £387.28

AE641C 24 x 2 x 0.100 600 x 50 x 2.50 4 £471.16

AE642J 24 x 2 x 0.100 600 x 50 x 2.50 6 £471.16

AE651H 26 x 2 x 0.100 650 x 50 x 2.50 4 £510.40

AE652M 26 x 2 x 0.100 650 x 50 x 2.50 6 £510.40

AE662A 28 x 2 x 0.100 700 x 50 x 2.50 6 £562.94

AE691F 30 x 21⁄2 x 0.100 750 x 63 x 2.50 4 £742.18

All Hard Suitable for Use with Kasto Machines

AE954E 12 x 11⁄4 x 0.062 300 x 32 x 1.6 10 £121.57

AE958M 14 x 11⁄4 x 0.062 350 x 32 x 1.6 6 £122.08

AE960N 14 x 11⁄4 x 0.062 350 x 32 x 1.6 10 £122.08

AE963B 16 x 11⁄4 x 0.075 400 x 32 x 2.0 4 £158.64

AE964X 16 x 11⁄4 x 0.075 400 x 32 x 2 6 £158.64

AE966C 16 x 11⁄4 x 0.075 400 x 32 x 2 10 £158.64

AE969D 18 x 11⁄2 x 0.075 450 x 38 x 2 4 £212.57

AE970P 18 x 11⁄2 x 0.075 450 x 38 x 2 6 £212.57

AE972G 18 x 11⁄2 x 0.075 450 x 38 x 2 10 £212.57

AE976H 22 x 13⁄4 x 0.075 550 x 45 x 2 6 £292.91

AE982B 23 x 2 x 0.100 575 x 50 x 2.5 4 £466.97

AE983X 23 x 2 x 0.100 575 x 50 x 2.5 6 £466.97

AE988D 26 x 21⁄4 x 0.100 650 x 56 x 2.5 4 £591.43

AE994R 28 x 21⁄4 x 0.100 700 x 56 x 2.5 4 £637.16

AE995H 28 x 21⁄4 x 0.100 700 x 56 x 2.5 6 £637.16

FOR OUR

HACKSAW MACHINESGO TO PAGE 525

THS07_MT10_P564-565 28/3/07 10:20 Page 564

MA

CH

INE

TO

OLS

565

HACKSAW BLADES

• Fully hardened molybdenum high speed steel

• Ideal for long wear life and top performancein sawing a wide range of materials, includingstainless and other tough-to-cut alloy steel

• Solid high speed steel blades will withstandheavier feed pressures for faster, bettercutting than other types of hacksaw blades

• Packed 10 blades per box

Power Hacksaw Blades

List PriceLength x Width x Thickness Pinhole Diameter Teeth Per Per Box

Code Item Ref (mm) (") (mm) (") 25mm/Inch (exc VAT)

Redstripe® High Speed Steel

RS12108-5 AV908 300 x 25 x 1.25 12 x 1 x 0.050 8.5 0.335 14 £85.17

RS12148-5 AV905 300 x 25 x 1.25 12 x 1 x 0.050 8.5 0.335 10 £85.17

RS14108-5 AV911 350 x 25 x 1.25 14 x 1 x 0.050 8.5 0.335 10 £93.97

RS14148-5 AV914 350 x 25 x 1.25 14 x 1 x 0.050 8.5 0.335 14 £93.97

RS14068-6 AV917 350 x 32 x 1.60 14 x 11⁄4 x 0.062 8.5 0.335 6 £135.39

RS14108-6 AV920 350 x 32 x 1.60 14 x 11⁄4 x 0.062 8.5 0.335 10 £135.39

RS16068-6 AV923 400 x 32 x 1.60 16 x 11⁄4 x 0.062 8.5 0.335 6 £150.91

RS16108-6 AV926 400 x 32 x 1.60 16 x 11⁄4 x 0.062 8.5 0.335 10 £150.91

RS17068-6 AV929 425 x 32 x 1.60 17 x 11⁄4 x 0.062 8.5 0.335 6 £158.61

RS17108-6 AV932 425 x 32 x 1.60 17 x 11⁄4 x 0.062 8.5 0.335 10 £158.61

RS18060-6 AV935 450 x 32 x 1.60 18 x 11⁄4 x 0.062 10.5 0.413 6 £168.87

RS18100-6 AV938 450 x 32 x 1.60 18 x 11⁄4 x 0.062 10.5 0.413 10 £168.87

RS18040-7 AV941 450 x 38 x 2.00 18 x 11⁄2 x 0.075 10.5 0.413 4 £230.45

RS18060-7 AV944 450 x 38 x 2.00 18 x 11⁄2 x 0.075 10.5 0.413 6 £230.45

RS21060-7 AV947 525 x 38 x 2.00 21 x 11⁄2 x 0.075 10.5 0.413 6 £267.72

RS21040-8 AV950 525 x 45 x 2.25 21 x 13⁄4 x 0.088 10.5 0.413 4 £333.58

RS21060-8 AV953 525 x 45 x 2.25 21 x 13⁄4 x 0.088 10.5 0.413 6 £333.58

RS23042-0 AV956 575 x 50 x 2.50 23 x 2 x 0.100 12.5 0.492 4 £438.29

RS23062-0 AV959 575 x 50 x 2.50 23 x 2 x 0.100 12.5 0.492 6 £438.29

RS24042-8 AV968 600 x 45 x 2.25 24 x 13⁄4 x 0.088 12.5 0.492 4 £379.77

RS24062-8 AV971 600 x 45 x 2.25 24 x 13⁄4 x 0.088 12.5 0.492 6 £379.77

RS24040-0 AV974 600 x 50 x 2.50 24 x 2 x 0.100 10.5 0.413 4 £459.80

RS24060-0 AV977 600 x 50 x 2.50 24 x 2 x 0.100 10.5 0.413 6 £459.80

RS24042-0 AV980 600 x 50 x 2.50 24 x 2 x 0.100 12.5 0.492 4 £459.80

RS24062-0 AV983 600 x 50 x 2.50 24 x 2 x 0.100 12.5 0.492 6 £459.80

RS26042-0 AV986 650 x 50 x 2.50 26 x 2 x 0.100 12.5 0.492 4 £516.74

RS26062-0 AV989 650 x 50 x 2.50 26 x 2 x 0.100 12.5 0.492 6 £516.74

RS28042-0 AV992 700 x 50 x 2.50 28 x 2 x 0.100 12.5 0.492 4 £552.17

RS28062-0 AV995 700 x 50 x 2.50 28 x 2 x 0.100 12.5 0.492 6 £552.17

RS30042-0 AW001 750 x 63 x 2.50 30 x 21⁄2 x 0.100 12.5 0.492 4 £702.59

Redstripe® High Speed Steel Power Hacksaw Blades for Kasto and other Metric Machines

RS350-6 AW106 350 x 32 x 2.00 14 x 11⁄4 x 0.075 8.5 0.335 6 £173.90

RS350-10 AW109 350 x 32 x 2.00 14 x 11⁄4 x 0.075 8.5 0.335 10 £173.90

RS400-4 AW112 400 x 32 x 2.00 16 x 11⁄4 x 0.075 8.5 0.335 4 £199.66

RS400-6 AW115 400 x 32 x 2.00 16 x 11⁄4 x 0.075 8.5 0.335 6 £199.66

RS400-10 AW118 400 x 32 x 2.00 16 x 11⁄4 x 0.075 8.5 0.335 10 £199.66

RS450-4 AW121 450 x 38 x 2.00 18 x 11⁄2 x 0.075 8.5 0.335 4 £249.88

RS450-6 AW124 450 x 38 x 2.00 18 x 11⁄2 x 0.075 8.5 0.335 6 £249.88

RS450-10 AW127 450 x 38 x 2.00 18 x 11⁄2 x 0.075 8.5 0.335 10 £249.88

RS500-4 AW1275 500 x 45 x 2.00 20 x 13⁄4 x 0.075 10.5 0.413 4 £322.34

RS500-6 AW128 500 x 45 x 2.00 20 x 13⁄4 x 0.075 10.5 0.413 6 £322.34

RS500-10 AW129 500 x 45 x 2.00 20 x 13⁄4 x 0.075 10.5 0.413 10 £322.34

RS550-4 AW130 550 x 45 x 2.00 22 x 13⁄4 x 0.075 10.5 0.413 4 £349.46

RS550-6 AW133 550 x 45 x 2.00 22 x 13⁄4 x 0.075 10.5 0.413 6 £349.46

RS550-10 AW136 550 x 45 x 2.00 22 x 13⁄4 x 0.075 10.5 0.413 10 £349.46

RS575-4 AW139 575 x 50 x 2.50 23 x 2 x 0.100 10.5 0.413 4 £475.68

RS575-6 AW142 575 x 50 x 2.50 23 x 2 x 0.100 10.5 0.413 6 £475.68

RS600-4 AW143 600 x 50 x 2.50 24 x 2 x 0.100 10.5 0.413 4 £479.84

RS600-6 AW144 600 x 50 x 2.50 24 x 2 x 0.100 10.5 0.413 6 £479.84

RS650-4 AW145 650 x 55 x 2.50 26 x 23⁄16 x 0.100 10.5 0.413 4 £592.74

RS650-6 AW148 650 x 55 x 2.50 26 x 23⁄16 x 0.100 10.5 0.413 6 £592.74

RS700-4 AW151 700 x 55 x 2.50 28 x 23⁄16 x 0.100 10.5 0.413 4 £724.58

RS700-6 AW154 700 x 55 x 2.50 28 x 23⁄16 x 0.100 10.5 0.413 6 £724.58

RS850-4 AW157 850 x 60 x 3.00 34 x 23⁄8 x 0.118 12.5 0.492 4 £1,258.30

RS850-6 AW160 850 x 60 x 3.00 34 x 23⁄8 x 0.118 12.5 0.492 6 £1,258.30

THS07_MT10_P564-565 28/3/07 10:20 Page 565

566

MA

CH

INE

TO

OLS

HACKSAW BLADES

• These bi-metal high speed steel edge bladesare the best for tough materials

• The high speed steel edge gives themunparalleled cutting efficiency and thetough alloy steel back resists breakage whenused under less than ideal conditions

• Blades will handle irregular shapes andinterrupted cuts with ease

• Packed 10 blades per box

Power Hacksaw Blades

List PriceLength x Width x Thickness Pinhole Diameter Teeth Per Per Box

Code Item Ref (mm) (") (mm) (") 25mm/Inch (exc VAT)

Bluestripe® Bi-Metal Power Hacksaw Blades

BS12108-5 AW238 300 x 28 x 1.25 12 x 11⁄8 x 0.050 8.5 0.335 10 £99.38

BS12148-5 AW241 300 x 28 x 1.25 12 x 11⁄8 x 0.050 8.5 0.335 14 £99.38

BS14108-5 AW244 350 x 28 x 1.25 14 x 11⁄8 x 0.050 8.5 0.335 10 £109.76

BS14148-5 AW247 350 x 28 x 1.25 14 x 11⁄8 x 0.050 8.5 0.335 14 £109.76

BS14068-6 AW250 350 x 34 x 1.60 14 x 13⁄8 x 0.062 8.5 0.335 6 £143.58

BS14108-6 AW253 350 x 34 x 1.60 14 x 13⁄8 x 0.062 8.5 0.335 10 £143.58

BS16068-6 AW259 400 x 32 x 1.60 16 x 11⁄4 x 0.062 8.5 0.335 6 £162.12

BS16108-6 AW262 400 x 32 x 1.60 16 x 11⁄4 x 0.062 8.5 0.335 10 £162.12

BS16060-7 AW265 400 x 41 x 2.00 16 x 15⁄8 x 0.075 10.5 0.413 6 £226.86

BS16100-7 AW268 400 x 41 x 2.00 16 x 15⁄8 x 0.075 10.5 0.413 10 £226.86

BS18060-6 AW271 450 x 34 x 1.60 18 x 13⁄8 x 0.062 10.5 0.413 6 £179.73

BS18100-6 AW274 450 x 34 x 1.60 18 x 13⁄8 x 0.062 10.5 0.413 10 £179.73

BS18060-7 AW280 450 x 41 x 2.00 18 x 15⁄8 x 0.075 10.5 0.413 6 £249.37

BS18100-7 AW283 450 x 41 x 2.00 18 x 15⁄8 x 0.075 10.5 0.413 10 £249.37

Bluestripe® Bi-Metal Power Hacksaw Blades for Kasto and other Metric Machines

BS350-6 AW346 350 x 34 x 2.00 14 x 13⁄8 x 0.075 8.5 0.335 6 £174.39

BS350-10 AW349 350 x 34 x 2.00 14 x 13⁄8 x 0.075 8.5 0.335 10 £174.39

BS400-4 AW352 400 x 34 x 2.00 16 x 13⁄8 x 0.075 8.5 0.335 4 £200.11

BS400-6 AW355 400 x 34 x 2.00 16 x 13⁄8 x 0.075 8.5 0.335 6 £200.11

BS400-10 AW358 400 x 34 x 2.00 16 x 13⁄8 x 0.075 8.5 0.335 10 £200.11

BS450-4 AW361 450 x 41 x 2.00 18 x 15⁄8 x 0.075 8.5 0.335 4 £250.30

BS450-6 AW364 450 x 41 x 2.00 18 x 15⁄8 x 0.075 8.5 0.335 6 £250.30

BS450-10 AW367 450 x 41 x 2.00 18 x 15⁄8 x 0.075 8.5 0.335 10 £250.30

BS500-6 AW370 500 x 54 x 2.50 20 x 21⁄8 x 0.100 10.5 0.413 6 £370.78

BS550-6 AW373 550 x 54 x 2.50 22 x 21⁄8 x 0.100 10.5 0.413 6 £400.76

BS575-4 AW376 575 x 54 x 2.50 23 x 21⁄8 x 0.100 10.5 0.413 4 £476.69

BS575-6 AW379 575 x 54 x 2.50 23 x 21⁄8 x 0.100 10.5 0.413 6 £476.69

BS600-4 AW380 600 x 54 x 2.50 24 x 21⁄8 x 0.100 10.5 0.413 4 £480.93

BS600-6 AW381 600 x 54 x 2.50 24 x 21⁄8 x 0.100 10.5 0.413 6 £480.93

BS650-6 AW382 650 x 54 x 2.50 26 x 21⁄8 x 0.100 10.5 0.413 6 £594.26

FOR HAND SAW BLADES SEE PAGES

& FRAMES 458-462

THS07_MT10_P566 28/3/07 13:00 Page 566

ORDERINGP

RO

DU

CT C

ATA

LO

GU

E

Thank you for your interest in the latest ‘Product Catalogue’ produced in association

with THS Tools Group.

Established in 1975, the THS Tools Group is the UK’s largest buying group of independent distributors

supplying a complete range of leading brand products to industry & tradesmen via a network of

distribution outlets all offering personal service and support. THS Members can offer you a

comprehensive range of products at competitive prices and with over 140 outlets throughout the UK

and Ireland, you won’t have far to travel for all your requirements.

Disclaimer

The Publisher of this catalogue does not assume any legal responsibility for errors or omissions that may have been made

in this publication and makes no warranty/guarantee or promise – expressed or implied – concerning the content, accuracy,

currency, quality or usefulness of the information provided here. In no event shall the Publisher be liable for any

direct/indirect punitive, incidental, special, consequential or any other damages arising out of, or in any way.

Specifications and descriptions in this catalogue are given in good faith but may change without notice and do not form

any part of any sale contract.

Trade Marks: All brand names and product names used in this book are trade marks, registered trade marks or trade names

of their respective holders.

Prices: All prices exclude VAT and were believed to be correct at going to press.

E&OE

The 800 page Product Catalogue represents just a selection of the product portfolio on offer. If you

are unable to find what you require, please contact your local THS Member who will also be able to

offer technical advice and information regarding current promotions.

How to order:

1 Select the product you require

2 Contact your local THS distribution outlet

3 Quote the product code and page number

If you are unsure who your local THS Member is

click here and enter your postcode into the

dealer locator

http://www.thstools.co.uk/Website/Public_Area/Dealer_Locator.c1004.aspx

machine tools - francis kirk · 0342-0554 d250 x 550 vario 250 550 stepless 95-3,000 £1,250.00...

Documents