macka's sand pty ltd€¦ · salt ash quarry, port stephens nsw macka's sand pty ltd date...
TRANSCRIPT
Salt Ash Quarry, Port Stephens NSW
Macka's Sand Pty Ltd
Date Sampled - 9/11/2012
Report Prepared: January, 2013
Material Analysisand
Test Results
Sand for use as uncrushed fine aggregate
AS 2758.1
Supplier Result
Property Units Target Min Max
Uncompacted Bulk Density t/m3 Report (Nominally 1.46) 1.49
Compacted Bulk Density t/m3 Report (Nominally 1.61)1.62
Particle Density (SSD) t/m3 2.62 2.52 2.64
Particle Density (Dry) 2.61 2.51 2.62
Water Absorption % 0.4 0 1.5 0.4
Washed Grading
% Finer Than 2.36 mm % 100
% Finer Than 1.18 mm % 100
% Finer Than 0.600 mm % 100 85 100 100
% Finer Than 0.300 mm % 40 30 50 49
% Finer Than 0.150 mm % 5 0 10 1
% Finer Than 0.075 mm % 1 0 5 0
% Finer Than 0.075 mm % 1 0 5 0
Moisture % 3 5
ReportN/A
Sodium sulphate soundness % <6 total weighted loss 0 6 0.2
Clay and Fine Silt 0 0 2 2
Acid Soluble Salts
– Chlorides % n/a n/a 0.050.002
AS1141.4
AS1141.5
AS1141.5
AS1141.11 cl 5.6
Material Finer than 2 micron 0 1AS1141.13
AS1141.24
AS1141.33
AS1012.20
Summary of Results: Specification Mackas Sand (Refer AS 2758.1)
Material Requirements
Test method
AS1141.4
AS1141.12
– Chlorides % n/a n/a 0.050.002
- Sulfates % n/a n/a 0.2 0.03
Sugar Nil n/a Nil Nil
Alkali Aggregate Reactivity Report
(with Cement used by Holcim)
Organics (Colour change) Report Fail
Organic Matter Content % 0.1 0 0.2 0.1
Light particles % 0 0 1 Nil
Petrographic Analysis Result
No.21,Units 10 & 11 Babila CL,
Beresfield PO BOX 284, THORNTON, NSW, 2322.
PH. (02) 4966 1844 FAX (02) 4966 1855
AS1012.20
AS1012.20
AS1141.35
T363
AS1141.34
AS1289.4.1.1
AS1141.31
ASTM C295
Client : Macka's Sand Pty Ltd Report Number:
Address : 2684 Nelson Bay Rd, Salt Ash, NSW Report Date :
Project Name : Material Evaluation Order Number :
Project Number : P203 Test Method :
Location: Salt Ash Quarry , Salt Ash NSW
Sample Number : S12-3487
Date Sampled : 9/11/2012
Date Tested : 15/11/2012
Sampled By : Sampled by Client
Sampling Method : As Received
Material Source : Salt Ash Quarry
Material Type : medium to fine SAND
Remarks
AS Sieve
Size(mm)
Percent
Passing
Specification
Limits
SAMPLE LOCATION
Salt Ash Quarry, NSW
Dune Sand
Lot Number : -
Test Number : -
- Specification Number :Holcim Concrete Fine
Aggregate
Page 1 of 1
Aggregate PSD Report
P203 - 16/1
15/01/2013
-
AS1141.11.1
100
75
63
53
37.5
26.5
19.0
16.0
13.2
9.5
6.7
4.75
2.36
1.18 100 100
0.600 100 85-100
0.425 94 -
0.300 49 30-50
0.150 1 0-10
0.075 0 0-5
This document is issued in accordance with NATA's accreditation
APPROVED SIGNATORY
Document Code RF5-4
This document is issued in accordance with NATA's accreditation
requirements. Accredited for compliance with ISO/IEC 17025.
Karl Dawes - General Manager
NATA Accreditation Number
14975
Client : Macka's Sand Pty Ltd Report Number: P203 - 17/1
Address : 2684 Nelson Bay Rd, Salt Ash, NSW Report Date : 15/01/2013
Project Name : Material Evaluation Order Number : -
Project Number : P203 Test Method : AS1141.12
Location: Salt Ash Quarry , Salt Ash NSW
Sample Number : S12-3487
Test Number : -
Sampling Method : As Received
Date Sampled : 8/11/2012
Date Tested : 15/11/2012
Material Type : medium to fine SAND
Material Source : Salt Ash Quarry
Lot Number : -
Sample Location : Salt Ash Quarry, NSW
Dune Sand
Material Finer than 75µm Report
Page 1 of 1
Material Finer than 75µm (%) : 0
Remarks : -
This document is issued in accordance with NATA's accreditation
APPROVED SIGNATORY
Document Code RF111-4
This document is issued in accordance with NATA's accreditation
requirements. Accredited for compliance with ISO/IEC 17025.
Karl Dawes - General Manager
NATA Accreditation Number
14975
Client : Macka's Sand Pty Ltd Report Number: P203 - 18/1
Address : 2684 Nelson Bay Rd, Salt Ash, NSW Report Date : 15/01/2013
Project Name : Material Evaluation Order Number : -
Project Number : P203 Test Method : AS1141.5
Location: Salt Ash Quarry , Salt Ash NSW
Sample Number : S12-3487
Test Number : -
Sampling Method : As Received
Date Sampled : 9/11/2012
Date Tested : 19/11/2012
Material Type : medium to fine SAND
Material Source : Salt Ash Quarry
Lot Number : -
Sample Location : Salt Ash Quarry, NSW
Dune Sand
Particle Density and Water Absorption Report
Page 1 of 1
Water Absorption (%) : 0.4
Particle Density DRY (t/m³) : 2.62
Particle Density SSD (t/m³) : 2.64
Apparent Particle Density (t/m³) : 2.66
Remarks : -
This document is issued in accordance with NATA's
APPROVED SIGNATORY
Document Code RF134-5
accreditation requirements. Accredited for compliance with
ISO/IEC 17025.Karl Dawes - General Manager
NATA Accreditation Number
14975
Client : Macka's Sand Pty Ltd Report Number: P203 - 19/1
Address : 2684 Nelson Bay Rd, Salt Ash, NSW Report Date : 15/01/2013
Project Name : Material Evaluation Order Number : -
Project Number : P203 Test Method : AS1141.4
Location: Salt Ash Quarry , Salt Ash NSW
Sample Number : S12-3487
Test Number : -
Sampling Method : As Received
Date Sampled : 9/11/2012
Date Tested : 15/11/2012
Material Type : medium to fine SAND
Material Source : Salt Ash Quarry
Lot Number : -
Sample Location : Salt Ash Quarry, NSW
Dune Sand
Bulk Density of Aggregate Report
Page 1 of 1
Loose Unit Mass (t/m³) : 1.49
Compacted Unit Mass (t/m³) : 1.62
Remarks :
This document is issued in accordance with NATA's accreditation
APPROVED SIGNATORY
-
Document Code RF171-8
This document is issued in accordance with NATA's accreditation
requirements. Accredited for compliance with ISO/IEC 17025.
Karl Dawes - General Manager
NATA Accreditation Number
14975
Client : Macka's Sand Pty Ltd Report Number: P203 - 20/1
Address : 2684 Nelson Bay Rd, Salt Ash, NSW Report Date : 15/01/2013
Project Name : Material Evaluation Order Number : -
Project Number : P203 Test Method : AS1141.24
Location: Salt Ash Quarry , Salt Ash NSW
Sample Number : S12-3487
Test Number : -
Sampling Method : As Received
Date Sampled : 9/11/2012
Date Tested : 15/11/2012
Material Type : medium to fine SAND
Material Source : Salt Ash Quarry
Lot Number : -
Sample Location : Salt Ash Quarry, NSW
Dune Sand
Sodium Sulphate Soundness Report
Page 1 of 1
The linked image cannot be displayed. The file may have been moved, renamed, or deleted. Verify that the link points to the correct file and location.
Percent Loss 53.0 to 37.5mm: -
Percent Loss 37.5 to 26.5mm: -
Percent Loss 26.5 to 19.0mm: -
Percent Loss 19.0 to 13.2mm: -
Percent Loss 13.2 to 9.5mm: -
Percent Loss 9.5 to 4.75mm: -
Percent Loss 4.75 to 2.36mm: -
Percent Loss 2.36 to 1.18mm: -
Percent Loss 1.18 to 0.60mm: -
Percent Loss 0.60 to 0.30mm: 0.2
Sodium Sulphate Soundness (%) : 0.2
Remarks : -
This document is issued in accordance with NATA's
accreditation requirements. Accredited for compliance with
ISO/IEC 17025.
APPROVED SIGNATORYThe linked image cannot be displayed. The file may have been moved, renamed, or deleted. Verify that the link points to the
correct file and location.
Document Code RFO165-8
ISO/IEC 17025.Karl Dawes - General Manager
NATA Accreditation Number
14975
Client : Macka's Sand Pty Ltd Report Number: P203 - 21/1
Address : 2684 Nelson Bay Rd, Salt Ash, NSW Report Date : 15/01/2013
Project Name : Material Evaluation Order Number : -
Project Number : P203 Test Method : AS1141.34
Location: Salt Ash Quarry , Salt Ash NSW
Sample Number : S12-3487
Test Number : -
Sampling Method : As Received
Date Sampled : 9/11/2012
Date Tested : 19/11/2012
Material Type : medium to fine SAND
Material Source : Salt Ash Quarry
Lot Number : -
Sample Location : Salt Ash Quarry, NSW
Dune Sand
Organic Impurities Report
Page 1 of 1
Colour Assessment Method : Visual
Test Outcome : FAIL
Remarks : -
This document is issued in accordance with NATA's accreditation
APPROVED SIGNATORY
Document Code RF128-6
This document is issued in accordance with NATA's accreditation
requirements. Accredited for compliance with ISO/IEC 17025.
Karl Dawes - General Manager
NATA Accreditation Number
14975
SUGAR IN AGGREGATES.XLS
CLIENT: Macka’s Sand & Soil PROJECT: Material Evaluation TEST PROCEDURE: Laboratory Sample Number: Date Sampled: 9.11.2012 Fraction Tested: As Received Sample Description: Fine Sand (Dune) Field Number: Submitted 9.11.2012 Reagents used:Sodium hydroxide And hydrochloric acid Apparatus used in this test complying with AS1141.2 and AS2163.
TEST RESULTS: Presence of Sugar: No Method of colour assessment: Sampling Method: Submitted by Client Notes:
This document is issued in accordance with NATA’s accreditation requirements. Accredited for compliance with ISO/IEC 17025. This Report mat not be reproduced except in full.
RS30 Issue 1 Rev.B
No. 21 Unit 10&11 Babila St Beresfield NSW 2322PO BOX 284 THORNTON NSW 2322 PH: 02 49661844 FAX: 02 49661855
Macka’s Sand & Soil
Material Evaluation – Salt Ash quarry NSW
AS1141.35: Sugar in Aggregates
Laboratory Sample Number: S12-3487
As Received
Fine Sand (Dune)
Submitted 9.11.2012
Reagents used:Sodium hydroxide ,Copper sulphate,Sodium potassium tartrateAnd hydrochloric acid
Apparatus used in this test complying with AS1141.2 and AS2163.
Method of colour assessment: Visual using Reagents
Submitted by Client
Authorised Signatory: Date: 15/01/2013
This document is issued in accordance with NATA’s accreditation requirements. Accredited for compliance with ISO/IEC
mat not be reproduced except in full.
Issue 1 Rev.B
No. 21 Unit 10&11 Babila St Beresfield NSW 2322
Copper sulphate,Sodium potassium tartrate
Apparatus used in this test complying with AS1141.2 and AS2163.
Authorised Signatory: Karl Dawes General Manager
15/01/2013