Made By – Gautam Sharma (2K5/CE/416)

Deepankar Hyanki (2K5/CE/415)

What is a Layout A layout is a medium to

transfer the plan, length and width of the building on the ground.

Latitude and longitude details are required for plotting the exact points from the layout on the ground.

In the figure : 3-D Layout of a commercial building

Types of commercial buildings

There are various types of commercial buildings. Some examples of commercial buildings are given as -

BanksOffice buildingsHotelsMallsHospitalsStock ExchangeSuper MarketWarehouse

Site Selection CriteriaMany parameters impact the choice of the building site -

The operational requirements of the business such as a need for railroad/highway access

The structure may require use of a lot of over-the-road haulers thus requiring a fairly flat area; at least in the receiving/shipping area

Other requirements will be availability of power; the proximity of related suppliers and location of local labor services or employees

Sub-soil conditions and feasibility reports also play a major part of importance in the selection of site.

Factors affecting layout

Some factors which affect lay-out of commercial buildings are –

AccessibilityParkingLandscape Planning and

DesignFire safetyHVACLighting

Water supply and drainage Installation of Lifts and escalatorsAcoustic influence

Accessibility

The type of access should be in coherence with that of surroundings (example – accessibility from roads)

Purpose of the structure determines the type of access – example - warehouses require accessibility of heavy vehicles such as trucks

In places witnessing heavy footfall (example- malls), adequate consideration should be given to the driveways, and resting area

Parking

The number of vehicles entering and leaving the building determine the type of parking – underground or regular, and their ingress/egress patterns.

The type of vehicles using the parking space determine the height of underground parking

Underground parking requires construction of ramps for vehicles to move from one level to another

Parking (continued)In the picture :

A layout design showing an underground parking system with ingress/egress and the cut-outs on the ground surface.

LandscapingLandscaping refers to any activity that

modifies the visible features of an area of land

Commercial buildings utilize landscaping in the form of fountains, small parks, artificial structures, etc

Adds to the aesthetic appeal of the building.

In the picture:Landscaping in Delhi College of Engineering

Landscaping

In the picture: Landscaping in a farm house

In the picture: Landscaping in a hotel

Fire SafetyFire safety must be ensured in the building by means

of –

Installation of automatic fire detection and alarm systems

Installation of automatic sprinkler systems

Providing a fire exit in various parts of a building

Ensuring good ventilation through-out the building

Fire Safety (Continued)

In the figure: Automatic fire detector installed in a building

In the figure:Automatic Sprinkler system in action

HVAC – Heating, Ventilation, Air ConditioningUsed as “climate control” mechanism in medium to large

commercial and industrial buildings.

Ductwork, and space requirements for air-conditioning plant and ventilation system has to be take into account while deciding the lay-out

HVAC is necessary where humidity and temperature must all be closely regulated whilst maintaining safe and healthy conditions within

HVAC – Heating, Ventilation, Air Conditioning (Continued)

In the figure : HVAC system in a building

Position of Lifts and escalatorsCore walls of the lifts are designed to act as “shear

walls”, which resist any earthquake forces.

The position of lifts should be done in consultation with a structural engineer

Positioning of lifts and escalators should be in coherence with the accessibility plans of the building

PlumbingPlumbing system is used to deliver and drain away

water to and from the building.

Certain commercial buildings, such as hospitals, may require water treatment plant, and hence adequate consideration must be given to the layout.

No underground water or sewage pipelines must be intersected/ damaged during excavation

Power source and electric sub-stationsCommercial buildings often employ electric generators to provide

electricity backup during conditions of power failure.

Generators usually stored in chambers usually known as “Energy Centre”.

The energy centre should be such that the generator exhaust does not spread inside the building complex

Electrical substations are also required for buildings with large electricity demand (examples – hospitals, malls, etc)

Construction MethodologyThe course of action in order to construct a commercial

building, once the site has been chosen, is as follows –

Construction Methodology (Continued)

Construction Methodology (Continued)

7• Casting of beams and slabs

Construction Methodology (Continued)• Curing of concrete is done alongside other tasks. For ex – Curing of

ground floor slab may be done as the columns between ground and first floor are being casted

• Planning and scheduling of various activities are done using network analysis, using various softwares like Primavera and Microsoft Project

• Daily, weekly and monthly progress reports are generated in order to monitor the progress of the project. Adequate adjustments can be made if the project lags behind schedule.

References

• We are thankful to Mr C. A. Prasad, Assistant Vice President (Planning), DLF-Laing O’Rourke, who guided us towards the completion of this presentation

• Various internet sites, primarily wikipedia (www.wikipedia. com)

Thank You!