madelein pool portfolio
TRANSCRIPT
Madelein Pool PORTFOLIO
WELCOME
TO
MADELEIN’S
GALLERY
MARIO’S FRANCO’S FLAGSHIP
GARNIER GARNIER L’OREAL
L’OREAL
JINGLES STUDIO 353 GH DESIGNS
NBS BANK
MENZIES HAIR CITY
HAIR CITY THE GRAVE OFFICE INC. HAIR CITY
GH DESIGNS LOCATION: MORNINSIDE MALL,
JOHANNESBURG
The Brief: Take the existing Salon
and add Kerastase elements. Add
Merchandising units at the Reception
area for product display. Re-use the
existing Stylist Stations, but change
the finishes. Add the signature
Colour Bar at the Backwash area,
while designing the Back Bar to fit
into the existing space between the
basins and the wall.
4
The Brief: Take the existing Salon
and add Kerastase elements. Add an
l-shaped Merchandising unit at the
Reception area for product display.
Re-use the existing Stylist Stations
and add an additional 6 stations.
Bring in the Concept of a Nail Bar
into the Salon to make the Salon
multifunctional. At the Backwash
area, add the signature Colour Bar at
the Backwash area, while designing
the Back Bar to fit into the existing
space between the basins and the
wall.
5
STUDIO 353 LOCATION: CORNER OF RIVONIA BLV,
JOHANNESBURG
6
JINGLES SALON LOCATION: BENMORE GARDENS,
JOHANNESBURG
The Brief: Design the Salon to be a
Kerastase Salon. Add a Retail unit
that will be a focus point from the
outside of the Salon, and place the
CoIour Bar at the back of the Retail.
The Stylist stations had to be plain,
but stain resistant. Add a Nail bar to
the Salon to make it multifunctional.
At the Backwash area, add the
signature Back Bar to fit into the
existing space between the basins
and the wall.
Upstairs we had to place a table
where the customers can sit while
they are waiting for the colour to
take on their hair.
MARIO’S SALON LOCATION: GREEN POINT, CAPE TOWN
The Brief: The Salon needs to be
changed to a Kerastase Salon. Take
the existing Salon and add to
treatment room. One treatment
room needs to be white and the
other treatment room black. Also,
add a promo tables in the front of
the Salon as well as square shelves
against the wall which will act as I
room divider. Opposite the
Reception Desk a Nail bar was
added.
At the back of the Salon, a Color
Bar was added to act as a
decoration but also as storage for
the various hair Colour bottles.
7
FRANCO’S INTERNATIONAL LOCATION: HYDE PARK, JOHANNESBURG
The Brief: Design the Salon to be a
Kerastase Salon. Add promo tables
in the front of the Salon as well as
Merchandising units at the front of
the Salon for product display. I had
to come up with a design to display
all the different Hair Colours as well
as add different hair cutting stations
for both male & female.
The back of the Salon is dedicated
to the Men’s section.
8
The Brief: Create a complete stand
that consist out of L’OREAL
cosmetics, Skin Care as well as Men’s
Care. There also needs to be a
make-up section where clients can
get make over.
We were also given a budget.
Requirements: Go out to site and
get the correct dimension. Strip out
the existing unit and install new
drywall, lights as well as the various
units.
My Responsibilities: draw up the
Technical Drawings as well as the
necessary workshop drawings to
build the units. I also had to do high
quality renderings on which we got
approval.
This unit is due for installation at the
end of May, beginning June 2016
FLAGSHIP
LOCATION: CANAL WALK, CAPE
TOWN
REVIT LINE DRAWING OF THE MODEL
9
NOTES:
Existing Ceiling Height: 3250mm
AFFL
Existing Ceiling Tiles: All broken
tiles to be replaced and clean.
Existing Drywalls: All Drywalls to
be stripped, removed and
replaced to suit new layout and
units. Drywalls to be plastered
painted and made good in all
trades.
NEW DESIGN:
PERIMITER BULKHEAD:
Constructed from MDF. CNC cut
L’OREAL PARIS logo and rebated
lines. Bulkhead to be sprayed
Satin Gold to match all previous
units. 3mm Opal Perspex U050
to be applied to the inside of the
Bulkhead and LED strip lighting to
illuminate L’OREAL PARIS logo
from the back. Bulkhead to
include downlights. Downlights to
be sprayed Sating Gold to match
Bulkhead finish.
CENTRAL COLUMN: Clad with
chipboard, painted black.
Chipboard to allow space for a
void to house backlit visual and
cable reticulation. Column
Bulkhead and Central Makeover
counter to be constructed around
column.
COLUMN BULKHEAD:
Constructed from MDF. CNC cut
L’OREAL PARIS logo and rebated
lines. Bulkhead to be sprayed
Satin Gold to match all previous
units. 3mm Opal Perspex U050
to be applied to the inside of the
Bulkhead and LED strip lighting to
illuminate L’OREAL PARIS logo
from the back. Bulkhead to
include downlights. Downlights to
be sprayed Sating Gold to match
Bulkhead finish.
CENTRAL MAKEOVER COUNTER: Corner counter design, constructed on two sides of the column.
Counter base constructed from MDF to be sprayed Satin Gold, to match bulkhead, and finished off with a
White stone top. 3mm Opal Perspex U050 to be applied to the inside counter base and LED strip lighting
to illuminate L’OREAL PARIS logo from the back.
COSMETICS UNIT: Sprayed High Gloss Black with interchangeable visual.
PROMO UNIT: Sprayed High Gloss Black with interchangeable visual.
SKIN CARE UNIT: Sprayed High Gloss White with interchangeable visual.
MEN’S EXPERT: Sprayed High Gloss Black with interchangeable visual.
LIGHTBOX: Back panel with bright white LED strip lighting evenly spaced to provide even light distribution.
Lighting to be accessible by removable MDF frame held in place with magnets. Provision to be made for
interchangeable backlit graphics.
NEW DESIGN:
PERIMITER BULKHEAD: Constructed from MDF. CNC cut L’OREAL PARIS logo and rebated lines. Bulkhead to
be sprayed Satin Gold to match all previous units. 3mm Opal Perspex U050 to be applied to the inside of the
Bulkhead and LED strip lighting to illuminate L’OREAL PARIS logo from the back. Bulkhead to include downlights.
Downlights to be sprayed Sating Gold to match Bulkhead finish.
CENTRAL COLUMN: Clad with chipboard, painted black. Chipboard to allow space for a void to house backlit
visual and cable reticulation. Column Bulkhead and Central Makeover counter to be constructed around column.
COLUMN BULKHEAD: Constructed from MDF. CNC cut L’OREAL PARIS logo and rebated lines. Bulkhead to
be sprayed Satin Gold to match all previous units. 3mm Opal Perspex U050 to be applied to the inside of the
Bulkhead and LED strip lighting to illuminate L’OREAL PARIS logo from the back. Bulkhead to include downlights.
Downlights to be sprayed Sating Gold to match Bulkhead finish.
10
LOCATION: PNP V&A, CAPE TOWN
The Brief: Create a 4000mm complete
L’OREAL Wallbay that consist out of
Face Care, Hair Colour and Hair Care. I
also had to do a 1200mm Men’s Expert
unit.
Requirements: Go out to site and get
the correct dimension. Strip out the
existing unit and install the new unit.
My Responsibilities: draw up the
Technical Drawings as well as the
necessary workshop drawings to build
the units. I also had to do high quality
renderings in order to get approval.
This unit is due for installation at the
end of May, beginning June 2016
REVIT LINE DRAWINGS OF THE MODEL
11
NOTES:
1 - HEADER: Constructed from MDF. CNC cut L’OREAL PARIS logo and rebated lines. Bulkhead to be sprayed
Satin Gold to match all previous units. 3mm Opal Perspex U050 to be applied to the inside of the Bulkhead and
LED strip lighting to illuminate L’OREAL PARIS logo from the back.
2 - LIGHTBOX: Back panel with bright white LED strip lighting evenly spaced to provide even light distribution.
Lighting to be accessible by removable MDF frame held in place with magnets. Frame of FACE CARE to be
sprayed High Gloss White and frame of HAIR COLOUR and HAIR CARE to be sprayed High Gloss Black.
Provision to be made for interchangeable backlit graphics.
– SIGNAGE BOX: Constructed from MDF to be sprayed High Gloss White for FACE CARE and High Gloss
Black for HAIR COLOUR and HAIR CARE.
3 - TOP AND BOTTOM: Constructed from 32mm MDF sprayed High Gloss White for FACE CARE and High
Gloss Black for HAIR COLOUR and HAIR CARE.
4 – SIDE PANELS: Constructed from 32mm MDF sprayed High Gloss White for FACE CARE and High Gloss
Black for HAIR COLOUR and HAIR CARE. Side lighting LED strips to be concealed with rebated 3mm Opal
Perspex U050 panel to be accessible and to sit flush. All faces of side panels to be sprayed.
5 – SHELVES: 10mm Toughened Safety Glass with polished edges all around. Shelves to be held in place with
4x Heavy Duty Shelf Supports. (Gelmar, Product Code: 6171).
6 - KICKPLATE: 16mm MDF sprayed High Gloss White.
7 - DRAWERS: 2 x MDF internal drawer with heavy duty fully extendable drawer runners. Drawers to have one
outer face. All drawers to have full extension slide and soft closing drawers. 16mm MDF drawer front – drawer
box with finger pull detail, sprayed High Gloss White on inside, outside and edges of drawer unit.
8 - BACKING BOARD: 16mm MDF sprayed High Gloss White.
REVIT LINE DRAWINGS OF THE MODEL
NOTES:
1 - HEADER: Constructed from MDF. CNC cut L’OREAL PARIS logo and rebated lines. Bulkhead to be sprayed Satin Black. 3mm Opal Perspex U050 to be
applied to the inside of the Bulkhead and LED strip lighting to illuminate L’OREAL PARIS logo from the back.
2 - LIGHTBOX: Back panel with bright white LED strip lighting evenly spaced to provide even light distribution. Lighting to be accessible by removable MDF
frame held in place with magnets. Provision to be made for interchangeable backlit graphics.
3 - TOP AND BOTTOM: Constructed from 32mm MDF sprayed High Gloss Black.
4 – SIDE PANELS: Constructed from 32mm MDF sprayed High Gloss Black. Side lighting LED strips to be concealed with rebated 3mm Black Perspex panel to
be accessible and to sit flush. All faces of side panels to be sprayed.
5 – SHELVES: 10mm Toughened Safety Glass with polished edges all around. Shelves to be held in place with 4x Heavy Duty Shelf Supports. (Gelmar, Product
Code: 6171).
6 - KICKPLATE: 16mm MDF sprayed High Gloss Black.
7 - DRAWERS: 2 x MDF internal drawer with heavy duty fully extendable drawer runners. Drawers to have one outer face. All drawers to have full extension
slide and soft closing drawers. 16mm MDF drawer front – drawer box with finger pull detail, sprayed High Gloss White on inside, outside and edges of drawer
unit.
8 - BACKING BOARD: 16mm MDF sprayed High Gloss Black.
12
LOCATION: PNP V&A, CAPE TOWN
The Brief: Create a 4000mm
complete GARNIER Wallbay that
consist out of Deo, Face and Hair.
Requirements: Go out to site and get
the correct dimension. Strip out the
existing unit and install the new unit.
My Responsibilities: draw up the
Technical Drawings as well as the
necessary workshop drawings to build
the units. I also had to do high quality
renderings in order to get approval.
This unit is due for
installation at the end of
May, beginning June 2016
REVIT LINE DRAWINGS OF THE MODEL
13
NOTES:
1 - HEADER: Constructed from 3mm Opal Perspex U050. Green lines, Leaf Ball and
white surface are aligned and is printed on cut vinyl. Green letters are MDF CNC cut and
sprayed Pantone 5605C. Leaf ball is a backlit vinyl. Line 1: Pantone 7482C. Line 2:
Pantone 377C. Line 3: Pantone 7741C. Line 4: Pantone 3435C.
2 - HEADER: Constructed from 3mm Opal Perspex. Green lines, Leaf Ball and white
surface are aligned and is printed on cut vinyl. Green letters are MDF CNC cut and
sprayed Pantone 5605C.
3 - LIGHTBOX: Back panel with bright white LED strip lighting evenly spaced to provide
even light distribution. Lighting to be accessible by removable MDF frame held in place
with magnets. Provision to be made for interchangeable backlit graphics.
4 - TOP AND BOTTOM: Panels from 32mm MDF sprayed High Gloss White.
14
NOTES:
1 - HEADER: Constructed from 3mm Opal Perspex U050. Green lines, Leaf Ball and white
surface are aligned and is printed on cut vinyl. Green letters are MDF CNC cut and sprayed
Pantone 5605C. Leaf ball is a backlit vinyl. Line 1: Pantone 7482C. Line 2: Pantone 377C. Line 3:
Pantone 7741C. Line 4: Pantone 3435C.
2 - HEADER: Constructed from 3mm Opal Perspex. Green lines, Leaf Ball and white surface are
aligned and is printed on cut vinyl. Green letters are MDF CNC cut and sprayed Pantone 5605C.
3 - LIGHTBOX: Back panel with bright white LED strip lighting evenly spaced to provide even
light distribution. Lighting to be accessible by removable MDF frame held in place with magnets.
Provision to be made for interchangeable backlit graphics.
4 - TOP AND BOTTOM: Panels from 32mm MDF sprayed High Gloss White.
5 - SIDE PANELS: Constructed from 32mm MDF sprayed High Gloss White. Side lighting LED strips to be concealed
with rebated 3mm Opal Perspex U050 panel to be accessible and to sit flush. All faces of side panels to be sprayed.
6 - SHELVES: 10mm Toughened Safety Glass with polished edges all around. Shelves to be held in place with 4x
Heavy Duty Shelf Supports. (Gelmar, Product Code: 6171).
7 - KICKPLATE: 16mm MDF sprayed High Gloss White.
8 - DRAWERS: 2 x MDF internal drawer with heavy duty fully extendable drawer runners. Drawers to have one outer
face. All drawers to have full extension slide and soft closing drawers. 16mm MDF drawer front – drawer box with
finger pull detail, sprayed High Gloss White on inside, outside and edges of drawer unit.
9 - BACKING BOARD: 16mm MDF sprayed High Gloss White.
WALLBAYS LOCATION: VARIOUS STORES
900mm x 2100mm
WALLBAY 1200mm x 2400mm
WALLBAY
*This unit has got a drawer
1800mm x 2100mm
WALLBAY
*This unit has got a drawer
The Brief: Create GARNIER
Wallbays that varies in sizes.
My Responsibilities: Do high quality
renderings in order to get approval.
These units has been installed in
various stores since February, 2016
REVIT LINE DRAWINGS OF THE
MODEL
15
The Brief: Create L’OREAL Wallbays
that varies in sizes.
My Responsibilities: Do high quality
renderings in order to get approval.
These units has been installed in
various stores since February, 2016
WALLBAYS
LOCATION: VARIOUS STORES
4000mm x 2400mm
WALLBAY
REVIT LINE DRAWINGS OF THE MODEL
3600mm x 2400mm WALLBAY
16
NBS BANK LOCATION: ZIMBABWE
The Brief: Create High quality
renderings to submit to the client to
show what we think the space should
look like. I was given the Technical
Drawings of the Bank and some
inspirational images of what the client
likes and would like to incorporate into
the Bank.
I had to do renderings on two
branches, one in Bulawayo and the
other one in Karigamombe.
This is the renderings of the
Karigamombe Branch.
17
15
HAIR CITY
LOCATION: MALL OF AFRICA
The Brief: Design the Store as well as
the Salon area, but separate them in a
way that they will still be connected.
Hair City’s main colour is red with a bit
of grey and white.
Requirements: The Salon has to have
movable units if clients want to get
their nails and hair done at the same
time. The Salon also has a wide variety
of Wigs and Merchandise and I had to
create various display units as well as a
fitting station for the clients. The client
wanted to bring an urban feel into the
store by using brick as well as
skyscraper wallpaper. We added
bulkheads to add more levels to the
store.
18
Fixtures:
A – Shelving
B - Shampoo Shelving
C – Glass Display behind POS
D1 – Mirrors above Worktop
D2 – Worktop
D3 – Mobile units on wheels
E – Wig Display
F – POS Counter
G – Fitting Station
H – Floor Display units
I – Celeb Wig Display units
J – Wall Merchandise
K – Mirror
L – “Selfie” area
M – Merchandising unit
N – Free Standing Promotional display
unit
O – Copper Pipe Shelf Display
P – Free standing Window display
Finishes:
Front and Back of House painted walls.
Prepare and clean surfaces 1 coat approved
universal undercoat. Leave 24 hours to dry and the
apply White PVA. All paint applied strictly to
manufacturer’s specifications. Allow to dry as per
manufacturer’s specifications.
Note:
Powder coated Aluminum framed double door
Shopfront.
Class 1 Powder coated
Colour: White Aluminum
Code: RAL 9006 (SATIN)
NOTE:
All fixtures constructed from MDF board and
sprayed White and Red High Gloss with elements
of Grey.
NOTE:
Layer of Chipboard to be fixed to demising wall for
extra support to the necessary units & signage.
19
\
SKETCH UP 3D
OFFICE LAYOUT CONCEPT FOR INC.
The Brief: We need a Pause
area, a server room, storage
room, open plan office (has to
seat 12 people), 3 Closed off
Offices and a Boardroom.
I came up with this concept. I
tried to keep it as natural as
possible and only bring colour
in to highlight the spaces.
OFFICE 3
OPEN PLAN OFFICES
BOARDROOM
OFFICE 1
OFFICE 2
SERVER ROOM
PAUSE AREA
STORAGE
ROOM
20 21 20
5
MOO
GRAPHIC DESIGN OFFICES – The Grave
CORLETT DRIVE MOODBOARD
THE MEETING TABLE:
THE BOOKSSHELVES:
WALLPAPER:
THE LIGHTS:
THE DESKS:
THE MEETING TABLE CHAIRS:
THE OFFICE CHAIRS:
21
22
HAIR CITY
LOCATION: CORLETT
DRIVE The Brief: Change the whole backwash
area to make it part of the store and
not a closed off area.
Requirements: The Salon also has a
wide variety of Wigs and Merchandise
so I had to add extra units. The client
wanted to bring an urban feel into the
store by using skyscraper wallpaper.
23
HAIR CITY
LOCATION: NORTHGATE SHOPPING CENTRE
The Brief: Design the Store as well as
the Salon area, but separate them in a
way that they will still be connected.
Hair City’s main colour is red with a bit
of grey and white.
Requirements: The Salon also has a
wide variety of Wigs and Merchandise
and I had to create various display
units as well as a fitting station for the
clients. The client wanted to bring an
urban feel into the store by using
skyscraper wallpaper. We added
bulkheads to add more levels to the
store.
24
Cocoon Lights
Quartz
Surfaces
O.R TAMBO INTERNATIONAL AIRPORT - MENZIE’S LOUNGE
Quartz
Surfaces
Selected Wallpapers Glass Wall Fountains
at Entrance Suggested
Artwork
printed on
Canvas
Oxford 3 Seater
Couch for Lounge
area
Mirror Wall
feature
Spati Desk
Frame
Army Canvas Trunk
Loom Weave
Ottomans
Caprice
Charles Dining
Chair, black
Retro 3 Leg
Table
Retro 3
Drawer Chest
Caesar Chair with
Arms:
Satina Grey, Linen
Flax
Capri Armchair –
Pebble.
Nesting
Tables
25
MOODBOARD
The Brief: We need a complete new design for the Menzies
lounge at the OR Tambo International Airport.
This is the Lounge area. The Bar Area is visible from the
rendering that is placed on the right hand side of the page.
The Gold circular forms act as dividers between areas as
well as a decorative item.
The Cocoon lights is only placed in the Lounge/ Dining area
while the
Reception has got down lighters and the rest suspended
globes placed at different heights.
26