magnetic liquid-level · pdf filemagnetic liquid-level gauges m a g n e t i c l i q u i d-l e...
TRANSCRIPT
The Measure of Excellence
See reverse side for dimensional data, materials of construction, performance, and advice on how to order.
8200Magnetic
Liquid-Level GaugesMagnetic Liquid-Level G
auges
ApplicationThe brass and stainless-steel construction of the 8200 Series spiral gauge makes it suitable for usein marine applications and in measuring levels of water, oil or fuel. They are also used in a varietyof construction and maintenance vehicles such as road sweepers and water spray trucks.
General In for ma tion & FeaturesThe Model 8240 spiral gauge incorporates a strong nickel-plated Alnico magnet. The magnet is capa-ble of driving a Twinsite™ sender that sends an electrical signal to a remote receiver and provides adirect, fractional reading.
The model 8260 spiral gauge is supplied with an easy-to-read side-view fractional dial. The model8280 spiral gauge is equipped with a standard top reading fractional dial.
All 8200 Series spiral gauges have a 11⁄2" MNPT tank connection, and are suitable for tank pressuresup to 25 PSIG [1,7 Bar] maximum. They are designed for top mounting only in tanks up to 36" [914 mm] deep and some models are UL listed for flammable liquids.
09/24/14
ISO 9001:2008 CERTIFIED
Model # Sender or Dial Type
8240 Senior, TwinSite™ sender in choice of 0-30, 0-90, 240-30 Ohm ranges.Specify your preference when ordering.
8260 #5097S00570 side-reading Senior fractional dial
8280 #5844S01793 direct-reading Senior fractional dial
The Measure of Excellence11616 Harry Hines Blvd. • P.O. Box 29242 • Dallas, TX 75229 • (972) 241-2161 • FAX (972) 620-3374
Website http://www.rochestergauges.com • E-mail [email protected]
8200 Magnetic Liquid-Level Gauges
Materials of Construction*Head, Support Rod, & CentershaftBrass.Tie Plate, Guide & Bearing PinStainless steel.Float Nitrile rubber.Drive MagnetPlated Alnico.Standard DialPolycarbonate, hermetically sealed.Side-view DialAluminum with polycarbonate crystal, hermetically sealed.TwinSite™ SenderPolyamide.
* Materials and specifications are subject to change with out notice. Pressure ratings sub ject to change due to tem per a ture and other en vi ron men tal considerations.
When ordering, specify:1.Gauge model number.2.Tank height.3.Ohm range on TwinSite™ versions.4.Riser height, if any.5.Any special requirements.
General Specifications*MountingDesigned for top mounting only.AccuracyAccuracy depends upon proper gauge sizing. Direct readdials +/-8%, TwinSite dials +/-12%. Accuracy may be lessdepending upon tank shape. Accuracy may be less near fulland empty. Accuracy may be less if tank is not level. Thisgauge is not to be used for filling. All accuracy estimates areexpressed as a percent of full scale.TemperatureStandard operating range is -40°F to 158°F, -40°C to 70°C.HumidityExposed portion is fully suitable for marine applications.ShockSuitable for marine applications.VibrationSuitable for marine applications.Power0.5 watts maximum for TwinSite™ versions.Tank Pressure0 to 25 PSIG [0 to 1,7 Bar].ApprovalDirect indicating gauge available UL listed for flammable liquids. Some models UL rec og nized for marine service.
Note: For gauge installation instructions see MS-516 Spiral.
Senior Dial
Senior Twinsite™ Sender (Specify Ohm range) Senior Side-View Dial
Standard Construction
RO
CH
ESTE
R GAUGES, INCO
FT E
XA
S
DALLAS, TEXAS
2 5⁄16"
1 3⁄16"
2 5⁄16"[58,7]
[30,1]
//
DESG
C .I N EXAS ,OF T
O
E
ARETS
G EL NU DI A
CRO
H
S
F971- 3. 5
S
U
,
.
LAAL
..A
21/
1 4 43
2 3⁄8"[60]
11⁄4"
36" Max i mum
11⁄2" NPT
1" to 3" de pend ing ondepth of tanks
[914]
[31,7]
2 5⁄16"
09/24/14