mainlinemainlineproducts.co.uk/wp-content/uploads/2015/01/full-rainscreen... · in 2006 we focussed...

A Manufacturer of a comprehensive range of High Quality RainscreenAccessories, Including Fasteners, Trims, Profiles, Gaskets & Tooling.

MAINLINENo 1 Manufacturer of Rainscreen Accessories

Any Fastener, Trim or Accessory accurately colour matched to any manufacturers panel in only 4 working days

S M T W T F S

1

9 10 11 12 13 14 15

16 17 18 19 20 21 22

23 24 25 26 27 28 29

30 31

2 3 4 5 6 7 8

A C C E S S O R I E S

don't get any better than this

DAYS

General Terms & Conditions

Ÿ PRICING: All prices are exclusive of VAT, Mainline Products (UK) Ltd reserve the right to amend prices without notice.

Ÿ DELIVERY: Free of charge for orders over £300. Orders under £300 will incur a carriage charge to be agreed prior to delivery. Stock orders placed before 2.00pm will be despatched by carrier for a next working day delivery. None stock orders (rivets & screws) please allow 4 working days.

Ÿ PAYMENT TERMS: 30 Days Nett - Subject to satisfactory credit facilities.

Ÿ T’s & C’s: Full Terms & Conditions can be found at the back of the catalogue.

Ÿ CATALOGUE INFORMATION: This catalogue is to be used as a guide only. We have endeavoured to reproduce correct installation practice where possible, however we cannot be held responsible or liable for any incorrect specifying of products. We therefore recommend you liaise with appropriate manufacturers for their guidelines and fixing methods.

Ÿ All rights reserved. All material in this catalogue is, unless otherwise stated the property of Mainline Products UK Ltd. Copyright and other intellectual property laws protect these materials. Images throughout this catalogue may carry watermarks which identifies us Mainline Products UK Ltd as the originator of such images. Reproduction or re-transmission of the materials in whole or in part, in any manner, without the prior written consent of the copyright holder is a violation of copyright law.

Ÿ NB: Mainline Products operate a just in time production process for decoratively coated fasteners therefore it is in the interest of the contractor / customer to provide as much prior notice of panel type and colour to ensure that delivery deadlines are met. In any event Mainline Products cannot be held responsible for late deliveries that give rise to any claim whatsoever.

PAINT CHARGES

Ÿ Standard RAL colours are: 1013, 1015, 3004, 3007, 3009, 5011, 6009, 7001, 7004, 7016, 7021, 7022, 7030, 7031, 7035, 7037, 8028, 9001, 9005 & 9010.

Ÿ Paint setup charge of £90.00 is applicable to all non standard RAL colours.

Ÿ If non-standard colour coating material is in stock then no setup charge will be applied.

TEL: 0845 345 7095 FAX: 0845 345 7096

MAINLINEPUTTING COLOUR IN CONSTRUCTION

Welcome to Mainline

Since its formation in 1991, Mainline has supplied its range of fasteners and fixings into the replacement window & door sector, railway network, local government, nuclear power station & general construction industries.

In 2006 we focussed our attention on the rainscreen cladding industry, developing a range of innovative products instrumental to acheiving professional results in the installation of cladding systems.

COLOURFIX & METALIX are our flagship products - a range of high quality fasteners decoratively coated with a unique corrosion & chip resistant paint system which offers unrivalled advantages to traditional powder coating processes.

Available in over 5000 colours and accurately colour matched to manufacturers cladding panels using specialised high tech laboratory colour matching technology. Colourfix & Metalix fasteners are available in just 4 working days from receipt of your order.

We hope you find this first edition catalogue both invaluable and an invaluable informative source of product information for supporting “Best Practice” in the installation of rainscreen cladding systems.

In the meantime thank you for considering Mainline Products UK Ltd for all your cladding fixings & accessories.

TEL: 0845 345 7095 FAX: 0845 345 7096


11

SDF-KB

SDF-KB

SDF-KB

50 - 60

50 - 60

AnchorEmbedment (mm)Product Code

Dimensions(mm)

10 X 60

10 X 80

10 X 100 50 - 60

Price Per 100

For securing helping hand brackets & aluminium rails to concrete, concrete block & brick

NB, The above anchor has a greater expansion zone to accommodate weaker substrates

For securing helping hand brackets & aluminium rails to concrete, concrete block no fines concrete & perforated brick

For securing timber battens to concrete & concrete block

WALL ANCHORS

Carbon Steel Stainless Steel

SDF-KB U

SDF-S

SDF-S

SDF-S

SDF-S

70 - 80

50 - 60

50 - 60

50 - 60

50 - 60

AnchorEmbedment (mm)

AnchorEmbedment (mm)

Product Code

Product Code

Dimensions(mm)

Dimensions(mm)

10 X 80

10 X 60

10 X 80

10 X 100

10 X 120

Price Per 100

Price Per 100

Carbon Steel

Carbon Steel

Stainless Steel

Stainless Steel

10mm13mm

10mm

10mm

13mm

Torx T40

MAINLINE

MAINLINE

MAINLINE

All rights reserved. All material in this catalogue is, unless otherwise stated, the property of Mainline Products UK Ltd.

TEL: 0845 345 7095 FAX: 0845 345 7096


44

Frame screw or rivet for securing aluminium rail to helping hand bracket

PricePer 100Product Code

4.8 19 8

Dimensions (mm)A B C

4.8 12 9.5

HSDL4819SS (SCREW)

RBD4812SS (RIVET)

1

2

MAINLINEPRODUCTS

Frame Screw Socket Drive Adaptors

Price EachDescription

MAKITA Torque Drive Gun (2 Battery)

ACCUBIRD Rivet Gun (1 Battery)

Adaptor for screw fixing rails to brackets

Adaptor for HH brackets to Metsec & Steel Stud

BTD140Z

RT/ACB

AD-FS08

AD-FS08300

Product Code

8

9

6

7

8 mm

6

7

MAINLINE

MAINLINE

FRAME FIXINGS & FIXING ACCESSORIES

Frame screw, d torque gun for securing aluminium rail tohelping hand bracket.

rive adaptor &

Frame rivet & rivet gun for securing aluminium rail to helping hand bracket.

Frame screws, Torque Gun for securing helping handbracket to METSEC / SFS & Steel Stud.

Drive Adaptor & 5 7 8

&

&

,

,

1

1

3 4 5

6

7

8

9

2

86

3 4

92 &

ORC A

B

C

B

MAINLINEA


Frame screws for securing helping hand bracket to Steel Stud & Structural Steel.

PricePer 100

5.5

5.5

5.5

5.5

35

50

30

67

8

8

8

8


1.2 - 16

1.2 - 31

2.0 - 12

4.0 - 39

Effective ClampingThickness (mm)Product Code

HSDL5535BI - JT3-3

HSDL5550BI - JT3-3

HSDL5530BI - JT3-6

HSDH5567BI - JT3-12

3

3

4

5

C A

B

For Steel Studup to 3.00mm

C A

B

For 6mm Steel Stud

A

B

C

For 12mm Structural Steel

MAINLINEPRODUCTS

Thermostop

TEL: 0845 345 7095 FAX: 0845 345 7096


55

PriceEach

PriceEach

Description

Description

Product Code

Product Code

Dimensions(mm)

Dimensions(mm)

STOP DRILL BITS FOR HIGH PRESSURE LAMINATE PANELSEXTERNAL

STOP DRILL BITS FOR INTERNAL HIGH PRESSURE LAMINATE PANELS

SELF CUTTING STAINLESS STEEL SCREW FOR SECURING BRACKETS TO HIGH PRESSURE LAMINATE PANELS

ADJUSTMENT WASHERS FOR CORRECT SCREW EMBEDMENT

Stop Drill Bit for 8mm Panel



Spare Blade for Stop Drill Bit









SD049005

SD049007

SD049010

SDSB049005

SDSB049007

SDSB049010

SD053005

SD053007

SD053010

SDSB053005

SDSB053007

SDSB053010

4.9 X 5.0

5.3 X 5.0

4.9 X 5.0

5.3 X 5.0

4.9 X 7.0

5.3 X 7.0

4.9 X 7.0

5.3 X 7.0

4.9 X 10.0

5.3 X 10.0

4.9 X 10.0

5.3 X 10.0

PTS Screw

PTS Screw

PTS Screw

PricePer 100

Description

PTS 6009.5

PTS 6011.5

PTS 6014.5

Product Code

6.0

6.0

6.0

9.5

11.5

14.5

Aluminium Washer

Aluminium Washer

Aluminium Washer

PricePer 100

Description

WAS1.0

WAS1.5

WAS2.0

Product Code

1.0mm

1.5mm

2.0mm

Dimensions(mm)

PTS SCREW

WASHER

4.9mm

STOP DRILL

SPARE BLADE INSERT

5.3mm

STOP DRILL

SPARE BLADE INSERT

B

A

Dimensions (mm)A B

STOP DRILL: Provides a controlled hole depth in the rear of the panel.

PTS SCREW: Used for securing the secret fix bracket to the rear of the panel.

SECURING SECRET FIX BRACKETS TO HIGH PRESSURE LAMINATES USING PTS SCREWS.

MAINLIN

E

MAINLINE

MAINLINE

MA

INLI

NE


TEL: 0845 345 7095 FAX: 0845 345 7096


MA

INL

INE

PR

OD

UC

TS

(UK

) LTD

ST

EP

1: D

rill hole in panel using correct STO

P D

RILL to rem

ain 3m

m from

face of panel.

Use 5m

m S

top Drill for 8 m

m P

anelU

se 7mm

Stop D

rill for 10mm

Panel

Use 10m

m S

top Drill for 13m

m P

anel

ST

EP

2: P

lace bracket over pre-drilled hole.

ST

EP

3: Place screw

through bracket and into pre-drilled hole utilising appropriate w

asher(s) to maintain a 3m

m gap

from face of panel.

3mm

3mm

The P

rocedureW

AS

HE

R

3mm

Deco

rative

Face

Deco

rative

Face

Deco

rative

Face

3mm

3mm

Prin

ciple

s for S

ecu

ring

Se

cret F

ix Bra

ckets to

HP

L P

an

els u

sing

PT

S S

crew

s.

11.5m

m9.5m

m

Panel T

hic

kness

(mm

)S

top D

rill bit

(mm

)

85

3.0

5.0

4.5

4.0

3.5

3.0

3.0

2.5

2.0

1.5

1.0

1.5

2.5

2.0

1.5

1.0

SE

E 11

.5 / 1

4.5

SC

RE

WS

SE

E 11

.5 / 1

4.5

SC

RE

WS

SE

E 11

.5 / 1

4.5

SC

RE

WS

SE

E 1

4.5

SC

RE

WS

SE

E 1

4.5

SC

RE

WS

SE

E 1

4.5

SC

RE

WS

SE

E 1

4.5

SC

RE

WS

SE

E 1

4.5

SC

RE

WS

SE

E 1

4.5

SC

RE

WS

SE

E 1

4.5

SC

RE

WS

SE

E 1

4.5

SC

RE

WS

SE

E 1

4.5

SC

RE

WS

SE

E 1

4.5

SC

RE

WS

SE

E 1

4.5

SC

RE

WS

SE

E 1

4.5

SC

RE

WS

SE

E 1

4.5

SC

RE

WS

SE

E 11

.5 / 1

4.5

SC

RE

WS

NO

WA

SH

ER

RE

QU

IRE

D

NO

WA

SH

ER

RE

QU

IRE

D

1.0

55555777777

10

10

10

10

10

10

88888

10

10

10

10

10

10

13

13

13

13

13

13

9.5

mm

PT

S S

crew

11.5

mm

PT

S S

crew

Wash

er T

hic

kness (m

m)

Wash

er T

hickn

ess

(mm

)

NB

: Calcu

latio

n F

orm

ula

Panel

Thic

kness

Bra

cke

tT

hic

kness

+

Scre

w D

epth

Require

dS

ele

ct Scre

wS

izeS

ele

ct Wash

er

Size

-8m

m5m

m

3mm

Panel

Cle

ara

nce

3m

m

10

mm

14.5m

m9.5m

m11.5m

m

11.5

mm

1.0m

m1.5m

m2.0m

m

1.5

mm

Bra

cket

Thickn

ess (m

m)

1.5

1.5

1.5

2.0

2.0

2.0

2.5

2.5

2.5

3.0

3.0

3.0

3.5

3.5

3.5

5.0

5.0

5.0

All rights reserved. A

ll material in this catalogue is, unless otherw

ise stated, the property of Mainline P

roducts UK

Ltd.

MA

INLIN

E

TE

L: 0845 345 7095FA

X: 0845 345 7096

14.5m

m

8.0

7.5

7.0

6.5

6.0

6.0

5.5

5.0

4.5

4.0

2.5

3.0

2.5

2.0

1.5

1.0

4.5

NO

WA

SH

ER

RE

QU

IRE

D

14.5

mm

PT

S S

crew

Wash

er T

hickn

ess (m

m)

Scre

w D

epth

Ach

ieve

d

10

mm

MAIN

LIN

EP

UT

TIN

G C

OLO

UR

IN C

ON

ST

RU

CT

ION

66

SECURING SECRET FIX BRACKETS TO FIBRE CEMENT PANELS & HIGH PRESSURE LAMINATESUSING UNDERCUT ANCHORS

N.B. Undercut Anchor Technology requires bespoke drilling equipment. We therefore suggest contacting your local cutting merchant / panel distributor for further details

The KEIL undercut anchor, for invisible attachment of thin panels, is manufactured from stainless steel.

Its geometry, matched to the KEIL undercut hole, applies maximum loads to the panels in an optimum manner.

This geometry ensures stress-free attachment in all commonly used panel materials from 6 mm thick.

Depending on panel thickness or carrying capacity required, different insertion depths (hS ) are available. The KEIL undercut anchor is designed in such a way that it withstands a greater load than just the weight of the panel

The KEIL undercut anchor offers major benefi ts due to the high installation integrity. The anchor is placed quickly, easily and safely at a controlled depth for all panel thicknesses in an optimum installation by using matching KEIL system components: anchor, panel bracket and KEIL locking screw with integral locking mechanism.

Only two parts (anchor sleeve and screw) are required for safeattachment.


TEL: 0845 345 7095 FAX: 0845 345 7096


77

SikaTack Panel Adhesive 300ml Cartridges

SikaTack Panel Adhesive 600ml Sausages

SikaTack Cleaner 205 1 Litre Can

SikaTack Primer 1 Litre Can

SikaTack Double Sided Tape 33Mtr Roll

Battery Powered Application GunSuitable for Cartridges & Sausages.

Product Code

Sika 300

Sika 600

Sika CL

Sika PR

Sika Tape

Sika Gun

Description Coverage Rate (Approx) Price

7 - 9 Lin Mtr Per Cartridge

11 -13 Lin Mtr Per Sausage

70 - 80 Lin Mtr Per Can

70 - 80 Lin Mtr Per Can

33 Lin Mtr Per Roll

The SikaTack® Structural Adhesive Fixing System


TEL: 0845 345 7095 FAX: 0845 345 7096


88

Screws for securing TRESPA 6mm, 8mm & 10mm Meteon to Timber battens

TRESPA Meteon

TRESPA Meteon

PricePer 100

25

38

4.8

4.8

12

12


X

X

Product Code Panel Type

SWLP4825SA

SWLP4838SA

B

C AMAINLINE

Rivets for securing TRESPA 6mm, 8mm, 10mm & 13mm Meteon to Aluminium rails

PricePer 100

18

23

4.8

4.8

16

16


X

X

Panel Type

SS/AL4818

SS/AL4823

6.5 to 13.0mm

11.0 to 19.5mm

Product Code Grip Range

C A

B

MAINLINE

TRESPA Meteon 6 & 8mm

TRESPA Meteon 10 & 13mm

TRESPA SCREWS & RIVETS

ANY COLOUR

MATCHED &

AVAILABLE ON SITE

IN 4 DAYS

P

P is a chip resistant decorative coating.

P

P

P fasteners are available in Matt, Satin, Gloss, Metallic & Woodgrain.

Manufactured from high grade Stainless Steel & Aluminium materials.

Developed specifically for use in harsh marine environments, for increased corrosion resistance.

UV Stable colour pigments maintain fastness.

COLOURFIX

COLOURFIX

COLOURFIX

COLOURFIX

DECORATIVE FASTENERS


–

–

–

High Grade Stainless Steel screw with large high load bearing head.

TORX® T20 drive bit included with each box of 100.

Metallic finish - Price on application.

–

–

–

–

High Grade Aluminium Rivet with large high load bearing head.

Aluminium Body, Stainless Steel Mandrel.


Totally Stainless Steel rivets available - Price on application.

TEL: 0845 345 7095 FAX: 0845 345 7096


99

TOOLING FOR TRESPA METEON

Please consult TRESPA installation guide for recommended location and amount of fixed and sliding points (www.trespa.com)

Installing TRESPA Meteon - Rivet Fix

PANEL

Step 2Using Mainline Centralising tool, drill holes in rail for receiving rivet.

PANEL

Step 3Use rivet gun & spacer nose piece to fix rivet inline with TRESPA recommendations.

Step 1Drill holes in panels.

10mm drill bit forsliding points.

4.9mm drill bit forfixed points.

PANEL

9.5mm

MAINLINEPRODUCTS

(UK) LTD

MAINLINE

MAINLINE

RAIL

4.9mm

RAIL

MAINLINEPRODUCTS

( )UK LTD

Installing TRESPA Meteon - Screw Fix

Step 2Use Mainline Colourfix screws to fix panel to timber.

Step 1Drill 8mm holes in panels for sliding points.No fixed points.

PANEL

PANEL

TIMBER

MAINLINE

MAINLINE

–

–

Panel must already be pre-drilled prior to using a centralising tool.Creates a perfectly aligned / centred hole into the aluminium rail.

–

–

Cordless rivet gun for effortless setting of rivets.Rivet spacer nosepiece to be used on all holes, both fixed & sliding points.

9.5mm 4.9mm

Product Code Price EachDescription

Centralising Tool & Replacement Drill Bit

Accubird Rivet Gun & Rivet Spacer Nosepiece

High Speed Steel Drill Bit for drilling holes in TRESPA

CTTRE9549

CTHDRLG4.9

HDRST 4.9mm

HDRST 8.0mm

RT/ACB

RT/ACB/SB

RT/ACB/NP

HDRST10.0mm

Centralising Tool

Replacement Drill Bit for Centralising Tool

For TRESPA Meteon Fixed Points (Rivet Fix)

For TRESPA Meteon (Screw Fix)

Accubird Rivet Gun & Battery

Spare Accubird Battery

Rivet Spacer Nose Piece

For TRESPA Meteon Sliding Points (Rivet Fix)

MAINLINEPRODUCTS

(UK) LTD

MAINLINE

Price Each

Price


TEL: 0845 345 7095 FAX: 0845 345 7096


1010

COLOURFIX

COLOURFIX

COLOURFIX

COLOURFIX


P


P increased

P



Developed specifically for use in harsh marine environments, for corrosion resistance.


MARLEY SCREWS & RIVETS

ANY COLOUR

MATCHED &

AVAILABLE ON SITE

IN 4 DAYS

–

–

–




MAINLINE

Natura Plus, Operal & Lamina

Textura

Natura Pro & Pictura

Gasket for all Natura Plus Screws

Cylindrical Sleeve (Stainless Steel)

B

C A

PricePer 100

384.8

35

40

1

N/A

5.5

5.5

4.5

12

12

16

8


X

X

X

X


SWLP5540SA

GAS4518

MARCYL

SWLP4838SA

SWLP5535SA

–

–

–

–





Natura Pro, Natura Plus, Textura, Pictura

Lamina (6 & 8mm)

Gasket for all Natura Plus Rivets

Spacer Bush for Rivets

For Securing Natura Pro, Natura Plus, Textura, Pictura & Lamina to Aluminium Rails

PricePer 100

184.0

184.8

15

16


X

1

5.7

4.0

4.1

14

9.3

X

X

X

Panel Type

GAS40114

SPACBUSH

SS/AL4818 6.5 to 13mm

SS/AL4018 6.5 to 13mm


C A

B

MAINLINE

Note: For Operal boards it is not neccessaryto use “wing shank” screws. Instead pre-drill5.00mm diameter holes in panels.


TEL: 0845 345 7095 FAX: 0845 345 7096


1111

TOOLING FOR MARLEY CEMENT PANELS

Installing Marley Natura Pro, Natura Plus, Textura, & Pictura - Rivet Fix

–

–

–

Spacer Bush: Natura Pro, Natura Plus, Textura & Pictura require a spacer bush inserted in two holes per panel to create fixed points.

Gasket: Natura Plus requires a rubber gasket on all rivets.

Please consult attached Marley table for component information.

PANEL

TIMBER

Step 1Drill holes in panels as per attached component table.


Cylindrical SleeveMust be used with Natura Pro, & Pictura, in all holes within panels.

GasketTo be used on all Natura Plus screws

Operal: Gasket & Cylindrical sleeve (Not Required).

PANEL

Installing Marley Natura Pro, Natura Plus, Textura, Pictura & Operal - Screw Fix

MAINLINE

9.0mm 4.1mm Product Code Price EachDescription


Centralising Tool





Natura Pro / Pictura (Screw Fix)

Natura Pro, Natura Plus, Textura & Pictura (Rivet Fix)

Operal (Screw Fix Only)

Textura (Screw Fix)

Natura Plus (Screw Fix)

CTMARC9041

CTHDRLG4.1

RT/ACB

RT/ACB/SB

RT/ACB/NP

HDRST5.0mm

HDRST6.0mm

HDRST6.5mm

HDRST7.0mm

HDRST9.5mm


High Speed Steel (Ground) Drill Bits for Cement Panels

Price Each

Price

MAINLINEPRODUCTS

(UK) LTD

MAINLINE

MAINLINE

PANEL


PANEL

Step 3Use rivet gun & spacer nose piece to fix rivet inline with MARLEY recommendations.

Step 1Drill 9.5mm holes in panels.

PANEL

9.0mm

MAINLINEPRODUCTS

(UK) LTD

MAINLINE

RAIL

4.1mm

RAIL

MAINLINEPRODUCTS

( )UK LTD

All rights reserved. All material in this catalogue is, unless otherwise stated, the property of Mainline Products UK Ltd.Please consult Marley installation guide for recommended location and amount of fixed and sliding points (www.marleyeternit.com)

TEL: 0845 345 7095 FAX: 0845 345 7096


MA

RLE

Y C

OM

PO

NE

NT

TAB

LE

Fixing Type

Drill B

it Size

(Panel H

ole)D

rill Bit S

ize(R

ail Hole)

Use of

Centralising Tool

Screw

5.5 x 40 x 16

Screw

5.5 x 40 x 16

Screw

4.8 x 38 x 12

Screw

4.8 x 38 x 12

Screw

4.8 x 38 x 12

Rivet 4.0 x 18 x 15

Rivet 4.0 x 18 x 15

Rivet 4.8 x 18 x 16

Rivet 4.0 x 18 x 15

Rivet 4.0 x 18 x 15

Screw

5.5 x 35 x 12

Not R

equiredN

ot Required

Not R

equired

Not R

equiredN

ot Required

Not R

equiredN

ot Required

Not R

equiredN

ot Required

Not R

equiredN

ot Required

Not R

equired

9.5mm

9.5mm

9.5mm

9.5mm

7.0mm

5.0mm

8.0mm

(Sliding P

oints)5.0m

m (Fixed P

oint)

8.0mm

(Sliding P

oints)5.0m

m (Fixed P

oint)

6.0mm

7.0mm

6.5mm

4.1mm

4.1mm

4.1mm

4.1mm

4.9mm

Yes(w

ith 9mm

boss)

Yes(w

ith 9mm

boss)

Yes(w

ith 9mm

boss)

Yes(w

ith 9mm

boss)

Yes(w

ith 7.5mm

boss)

Operal is not recom

mended for a rivet fix application.

Panel Type

Natura P

ro8m

m

Natura P

lus8m

m

Textura8m

m

Pictura8m

m

Operal

9mm

Lamina

6 & 8m

m

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Yes(on all holes)

Yes(on all holes)

Rivet S

pacerG

asket

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Yeson all rivets

Yeson all screw

s

All rights reserved. A

ll material in this catalogue is, unless otherw

ise stated, the property of Mainline P

roducts UK

Ltd.

Spacer B

ush

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Yeson tw

o fixed points

Yeson tw

o fixed points

Yeson tw

o fixed points

Yeson tw

o fixed points

Cylindrical S

leeve

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Not R

equired

Yeson every hole

Yeson every hole

MAIN

LIN

EP

UT

TIN

G C

OL

OU

R IN

CO

NS

TR

UC

TIO

N

1313

COLOURFIX

COLOURFIX

COLOURFIX

COLOURFIX


P


P increased

P





ROCKPANEL NAILS, SCREWS & RIVETS

Nails for Securing ROCKPANEL to Timber Battens

– High Grade A4 Stainless Steel Ring Shanked Nail.

– 32mm nail fixing ROCKPANEL to timber battens.

– 38mm nail for fixing weatherboarding up to 10mm.

CN3032SS

CN3038SS

Plain PricePer 100

Coloured PricePer 100Product Code


32

38

2.8

2.8

6

6

B

C AX

X

For Securing ROCKPANEL Boards to Timber Battens

SWSH4335SA



354.3 8X

Rivets for securing ROCKPANEL 6mm, 8mm, 10mm to Aluminium rails

C A

B

ROCKPANEL 6 & 8mm

ROCKPANEL 10mm

PricePer 100

18

23

4.8

4.8

16

16


X

X

Panel Type

SS/AL4818

SS/AL4823

6.5 to 13mm

11.0 to 19.5mm


MAINLINE

MAINLINE

B

C A

ANY COLOUR

MATCHED &

AVAILABLE ON SITE

IN 4 DAYS


–

–

–




–

–

–

–





TEL: 0845 345 7095 FAX: 0845 345 7096


1414

TOOLING FOR ROCKCLAD PANELS

Installing ROCKPANEL - Rivet Fix

–

–


–

–


8.5mm 4.9mm


Accubird Rivet Gun & Rivet Spacer Nosepiece Price Each

CT8549

CTHDRLG4.9

HDRST9.0mm

HDRST4.9mm

HDRST5.0mm

RT/ACB

RT/ACB/SB

RT/ACB/NP

High Speed Steel Drill Bit for drilling holes in ROCKPANEL Price

Centralising Tool

For Rockpanel (Rivet & Screw Fix) Sliding Points

For Rockpanel (Rivet & Screw Fix) Fixed Point

For Rockpanel (Screw Fix)






MAINLINEPRODUCTS

(UK) LTD

MAINLINE

Installing ROCKPANEL - Screw Fix

PANEL

TIMBER

One Step InstallationSimply drive Mainline Colourfix screwsthrough panel intotimber.

MAINLINE

PANEL


PANEL

Step 3Use rivet gun & spacer nose piece to fix rivet inline with ROCKPANEL recommendations.




PANEL

8.5mm

MAINLINEPRODUCTS

(UK) LTD

MAINLINE

MAINLINE

RAIL

4.9mm

RAIL

MAINLINEPRODUCTS

( )UK LTD

All rights reserved. All material in this catalogue is, unless otherwise stated, the property of Mainline Products UK Ltd.Please consult ROCKPANEL installation guide for recommended location and amount of fixed and sliding points (www.rockpanel.com)

TEL: 0845 345 7095 FAX: 0845 345 7096


Exclusively Matched for

–

–



1515

COLOURFIX

COLOURFIX

COLOURFIX

COLOURFIX


P


P increased

P





PARKLEX SCREWS & RIVETS

ANY COLOURMATCHED &

AVAILABLE ON SITE

IN 4 DAYS

B

C AMAINLINE

Screws for securing PARKLEX 6mm, 8mm & 10mm to Timber battens

PARKLEX Facade

PricePer 100

384.8 12


X


SWLP4838

PARKLEX Facade 6 & 8mm

PARKLEX Facade 10 & 12mm

Rivets for securing PARKLEX 6mm, 8mm, 10mm & 12mm to Aluminium rails

PricePer 100

18

23

4.8

4.8

16

16


X

X

Panel Type

SS/AL4818

SS/AL4823

6.5 to 13.0mm

11.0 to 19.5mm


C A

B

Gold Copper Antra Ambar

Silver Rubi Quartz Onix

Ambar

MAINLINE


–

–

–




TEL: 0845 345 7095 FAX: 0845 345 7096


1616

TOOLING FOR EXTERNAL PARKLEX

Installing PARKLEX - Rivet Fix

Installing PARKLEX - Screw Fix

PANEL

TIMBER




4.9mm drill bit for one fixed point per panel.

PANEL

MAINLINE

MAINLINE

–

–


–

–


7.5mm 4.9mm



High Speed Steel Drill Bit for drilling holes in PARKLEX Price


HDRST8.0mm

HDRST4.9mm

RT/ACB

RT/ACB/SB

RT/ACB/NP

CT7549

CTHDRLG4.9

For PARKLEX Sliding Points (Rivet & Screw Fix)

For PARKLEX Fixed Points (Rivet & Screw Fix)




Centralising Tool


MAINLINEPRODUCTS

(UK) LTD

MAINLINE

MAINLINE

PANEL


PANEL

Step 3Use rivet gun & spacer nose piece to fix rivet inline with PARKLEX recommendations.




PANEL

7.5mm

MAINLINEPRODUCTS

(UK) LTD

MAINLINE

MAINLINE

RAIL

4.9mm

RAIL

MAINLINEPRODUCTS

( )UK LTD

All rights reserved. All material in this catalogue is, unless otherwise stated, the property of Mainline Products UK Ltd.Please consult PARKLEX installation guide for recommended location and amount of fixed and sliding points (www.parklex.com)

TEL: 0845 345 7095 FAX: 0845 345 7096


–

–



1717

COLOURFIX

COLOURFIX

COLOURFIX

COLOURFIX


P


P increased

P





CEMBRIT SCREWS & RIVETS

ANY COLOUR

MATCHED &

AVAILABLE ON SITE

IN 4 DAYS

MAINLINE

For securing Cembrit Edge, Metro, Fusion, Cembonit & True to Timber

B

C A

Edge, Metro, Fusion, Cembonit & True

Gasket for all Cembrit Screws

PricePer 100

384.8

14.5

12

8


X

X


GAS4518

SWLP4838SA

Edge, Metro, Fusion, Cembonit & True

Spacer Bush for Rivet (Fixed Point)

For securing Cembrit Edge, Metro, Fusion, Cembonit & True to Aluminium Rails

PricePer 100

184.0 15


5.74.1 9.3X

X

Panel Type

SPACBUSH

SS/AL4018 6.5 to 13mm

N/A


C A

B

MAINLINE


–

–

–




TEL: 0845 345 7095 FAX: 0845 345 7096


1818

TOOLING FOR CEMBRIT CEMENT PANELS

Installing Cembrit Edge, Metro, Fusion, Cembonit & True - Rivet Fix

PANEL

TIMBER

Step 1Drill 7mm hole in panels.


GasketTo be used on all Cembrit screws

PANEL

Installing Screw Fix Cembrit Edge, Metro, Fusion, Cembonit & True -

MAINLINEMAINLINE

8.5mm 4.1mm Product Code Price EachDescription


Centralising Tool





Edge, Metro, Fusion, Cembonit & True - (Rivet Fix)

Edge, Metro, Fusion, Cembonit & True - (Screw Fix)

CT8541

CTHDRLG4.1

RT/ACB

RT/ACB/SB

RT/ACB/NP

HDRST9.0mm

HDRST7.0mm


High Speed Steel (Ground) Drill Bits for Cement Panels

Price Each

Price

MAINLINEPRODUCTS

(UK) LTD

MAINLINE

PANEL


PANEL

Step 3Use rivet gun & spacer nose piece to fix rivet inline with CEMBRIT recommendations.

Step 1Drill 9.0mm holes in panels.

PANEL

8.5mm

MAINLINEPRODUCTS

(UK) LTD

MAINLINE

RAIL

4.1mm

RAIL

MAINLINEPRODUCTS

( )UK LTD

Spacer Bush: Edge, Metro, Fusion, Cembonit & True require a spacer bush inserted to create a fixed point.

All rights reserved. All material in this catalogue is, unless otherwise stated, the property of Mainline Products UK Ltd.Please consult Cembrit installation guide for recommended location and amount of fixed and sliding points (www.cembrit.co.uk)

TEL: 0845 345 7095 FAX: 0845 345 7096


®

1919

COLOURFIX

COLOURFIX

COLOURFIX

COLOURFIX


P


P increased

P





STENI NAILS, SCREWS & RIVETS

ANY COLOUR

MATCHED &

AVAILABLE ON SITE

IN 4 DAYS

Nails for Securing STENI Nature (Stoneflex) to Timber Battens

– High Grade A4 Stainless Steel Annular Ring Shanked Nail.

– Available in the following STENI colours: Boston Brick, Smokey Mountain Grey, Indian Ivory, Sahara Beige, French Rouget, Mexican Pink, Bermuda White & Swedish Green. Additional RAL & NCS colours available on request.

CN3138SS



383.1 7.5

B

C A

X

MAINLINE

For Securing STENI Colour, Imago & Nature to Timber Battens

SWSH4335SA



354.3 8X

–

–


TORX® T20 drive bit included with each box of 100.B

C A

–

–

–




C A

B

For Securing STENI Colour & Imago to Aluminium Rails

Colour & Imago (Type 6 & 7)

PricePer 100

184.8 16


X

Panel Type

SS/AL4818 6.5 to 13mm


MAINLINE

MAINLINE


TEL: 0845 345 7095 FAX: 0845 345 7096


®

2020

Installing Colour & Imago - Rivet Fix

TOOLING FOR STENI COLOUR, IMAGO & NATURE

Installing Colour, Imago & Nature - Screw Fix

PANEL

TIMBER



5mm drill bit for sliding & fixed points.

PANEL

MAINLINE

MAINLINE

–

–


–

–


7.5mm 4.9mm

Product Code Price Each

CT7549

CTHDRL4.9

Description


HDRST8.0mm

HDRST4.9mm

HDRST5.0mm

RT/ACB

RT/ACB/SB

RT/ACB/NP

High Speed Steel Drill Bit for drilling holes in STENI Price

Centralising Tool

For STENI Colour & Imago (Rivet) Sliding Points

For STENI Colour & Imago (Rivet) Fixed Points

For STENI Colour & Imago (Screw Fix)






MAINLINEPRODUCTS

(UK) LTD

MAINLINE

PANEL


PANEL

Step 3Use rivet gun & spacer nose piece to fix rivet inline with STENI recommendations.




PANEL

7.5mm

MAINLINEPRODUCTS

(UK) LTD

MAINLINE

MAINLINE

RAIL

4.9mm

RAIL

MAINLINEPRODUCTS

( )UK LTD

All rights reserved. All material in this catalogue is, unless otherwise stated, the property of Mainline Products UK Ltd.Please consult STENI installation guide for recommended location and amount of fixed and sliding points (www.steni.co.uk)

TEL: 0845 345 7095 FAX: 0845 345 7096


®LUCOBONDA

2121

COLOURFIX

COLOURFIX

COLOURFIX

COLOURFIX


P


P increased

P





fasteners are available in Matt, Satin, Gloss, Metallic & Woodgrain.

ALUCOBOND RIVETS & TOOLING

Installing ALUCOBOND - Rivet Fix

16mm

4.8mm

18mm

4.9mm

–

–


–

–



High Speed Steel Drill Bit for drilling holes in ALUCOBOND Price


SS/AL4818

HDRST7.5mm

HDRST8.5mm

RT/ACB

RT/ACB/SB

RT/ACB/NP

CT8049

CT7049

CTHDRLG4.9

Product Code Price 100

Price Each

Description

Rivet for securing 4mm ALUCOBOND up to 3mm Aluminium Rail

For Alucobond 4mm - Grip Range 6.5 - 13mm




4mm Alucobond boards up to 1000mm in width.

4mm Alucobond boards above 1000mm in width.

Replacement Drill bit for Centralising Tool

Centralising Tool for Panels up to 1000mm in width

Centralising Tool for Panels above 1000mm in width

MAINLINEPRODUCTS

(UK) LTD

MAINLINE

MAINLINE


7.5mm Sliding Points for Panels up to 1000mm width.

8.5mm Sliding Points for Panels above 1000mm width.

PANEL

MAINLINE

PANEL


PANEL

7.0mm

MAINLINEPRODUCTS

(UK) LTD

RAIL

4.9mm

RAIL

MAINLINEPRODUCTS

( )UK LTD

Step 3Use rivet gun & spacer nose piece to fix rivet inline with ALUCOBOND recommendations.

ANY METALLICCOLOUR

MATCHED &AVAILABLE ON SITE

IN 4 DAYS

All rights reserved. All material in this catalogue is, unless otherwise stated, the property of Mainline Products UK Ltd.Please consult ALUCOBOND installation guide for recommended location and amount of fixed and sliding points (www.alucobond.com)

TEL: 0845 345 7095 FAX: 0845 345 7096


2222

COLOURFIX

COLOURFIX

COLOURFIX

COLOURFIX


P


P increased

P





fasteners are available in Matt, Satin, Gloss, Metallic & Woodgrain.

REYNOBOND RIVETS & TOOLING

ANY METALLICCOLOUR

MATCHED &AVAILABLE ON SITE

IN 4 DAYS

Installing REYNOBOND - Rivet Fix


7.5mm Sliding Points for Panels up to 1000mm width.

8.5mm Sliding Points for Panels above 1000mm width.

PANEL

MAINLINE

PANEL


PANEL

7.0mm

MAINLINEPRODUCTS

(UK) LTD

RAIL

4.9mm

RAIL

MAINLINEPRODUCTS

( )UK LTD

Step 3Use rivet gun & spacer nose piece to fix rivet inline with REYNOBOND recommendations.

16mm

4.8mm

18mm

4.9mm

–

–


–

–



High Speed Steel Drill Bit for drilling holes in REYNOBOND Price


SS/AL4818

HDRST7.5mm

HDRST8.5mm

RT/ACB

RT/ACB/SB

RT/ACB/NP

CT8049

CT7049

CTHDRLG4.9

Product Code Price 100Description

Rivet for securing 4mm REYNOBOND up to 3mm Aluminium Rail

For Reynobond 4mm - Grip Range 6.5 - 13mm




4mm Reynobond boards up to 1000mm in width.

4mm Reynobond boards above 1000mm in width.


Centralising Tool for Panels up to 1000mm in width

Centralising Tool for Panels above 1000mm in width

MAINLINEPRODUCTS

(UK) LTD

MAINLINE

MAINLINE

Price Each

All rights reserved. All material in this catalogue is, unless otherwise stated, the property of Mainline Products UK Ltd.Please consult REYNOBOND installation guide for recommended location and amount of fixed and sliding points (www.alcoa.com)

TEL: 0845 345 7095 FAX: 0845 345 7096


2323

CLADDING PROFILES

MAINLINE PRODUCTS

(UK) L

TD

Ventilation Profiles - Aluminium - 2.5 Metre Lengths

Drill Bit & Fixings for Securing Vent Profile to Substrate

External Corner Profile - Black Rigid PVC - 3 Metre Length

Internal Corner Profile - Black Rigid PVC - 3 Metre Length

Black Aluminium Horizontal Joint Profile - 3 Metre Length

VP3040MF

VP3030MF

SDS6X110

HF6X40 Nylon Hammer Fixings

SDS Drill Bit

VP3040BL

VP3050MF

VP3050BL

VP3070MF

VP3070BL

VP30100MF

VP30100BL

VP30120MF

VP30120BL

ProductCode

ProductCode

ProductCode

Finish

Finish

Finish

Price PerLength

Price PerLength

Price PerLength

HJPBB Black

For Panel Size

For Panel Size

For Panel Size

For all Panels

PRF/RP/EC/008

PRF/RP/IC/006-08

PRF/RP/EC/010

PRF/RP/IC/010-12

6mm - 8mm

6mm - 8mm

10mm

10mm - 12mm

Black

Black

Black

Black

ProductCode

ProductCode

Description

Black

Mill Finish

Mill Finish

Black

Mill Finish

Black

Mill Finish

Black

Black

Mill Finish

Mill Finish

FinishPrice PerLength

Price Each

30 30X

30 40X

30 50X

30 70X

30 100X

30 120X

DimensionsA BX

MAINLINE PRODUCTS

(UK) LTD

MAINLINE PRODUCTS

(UK) LTD

B

A

MAINLIN

E PRODUCTS(UK) LTD

MAINLINE PRODUCTS

(UK) LTD


TEL: 0845 345 7095 FAX: 0845 345 7096


2424

CLADDING GASKETS

Flexible Finned Joint Gasket for Timber - 25 Mtr Roll Size

Product Code Price Per Roll

GAS/FIN/36/BL

GAS/FIN/60/BL

GAS/FIN/75/BL

Flexible Self Adhesive Gasket for Aluminium Rails - 25 Mtr Roll Size

Product Code Gasket Width

Gasket Width

35mm

50mm

60mm

80mm

100mm

36mm

60mm

75mm

Price Per Roll

GAS/FLT/SA/35/1

GAS/FLT/SA/50/1

GAS/FLT/SA/60/1

GAS/FLT/SA/80/1

GAS/FLT/SA/100/1

1mmAdhesive Layer


TEL: 0845 345 7095 FAX: 0845 345 7096


2525 All rights reserved. All material in this catalogue is, unless otherwise stated, the property of Mainline Products UK Ltd.

CLADDING ACCESSORIES

Price Each

Centralising Tools

Ensures an accurately centred hole in the rail is achieved concentric to the hole in the panel thus facilitating panel movement for sliding points.

CT7049

CT7549

CT8049

CT8549

CT9041

CT9549

Product Code


Price EachDescription


When rivetting panels to Aluminium rail support systems it is important to maintain a gap of approximately 0.3mm between the underside of the rivet and the panel to allow panel movement in sliding point area’s. The rivet spacer nose piece allows you to achieve this and ensures panels are fixed correctly.

RT/ACB/NP

Product Code

CTHDRLG4.1

CTHDRLG4.9

Suitable for the following manufacturers panels

Marley Lamina / Parklex / Steni Colour

Alucobond & Reynobond above 1000mm wide

Rockpanel

Marley Natura Pro & Plus, Textura & Pictura

Trespa Meteon

Spare Drill Bit for CT9041

Spare Drill Bit for CT7049, 7549, 8049, 8549, 9549

Alucobond & Reynobond upto 1000mm wide

TEL: 0845 345 7095 FAX: 0845 345 7096


2626

COLOURFIX & decorative touch-up paint

P chip resistant decorative coatings.

P

P

& are

Developed originally for use in harsh marine environments to offer added corrosion resistance.

UV stable colour pigments maintain colour fastness.

COLOURFIX

TUP030SCB

TUP400SCA

TUP500SCT

NCSUC

Price EachProduct Code Description

Touch-up Bottle & Brush - 30ml

Touch-up Aerosol - 400ml

Touch-up Tin - 500ml

New Colour Set-up Charge

COLOURFIX - Solid Colour Touch-up Paints

TUP030MCB

TUP400MCA

TUP500MCT

NCSUC

Price EachProduct Code Description

Touch-up Bottle & Brush - 30ml

Touch-up Aerosol - 400ml

Touch-up Tin - 500ml

New Colour Set-up Charge

- Metallic Colour Touch-up Paints


TEL: 0845 345 7095 FAX: 0845 345 7096


NOTES: Unit 3b, Aspect Court, Cannel RowSilverdale Enterprise Park

Newcastle under LymeStaffordshire, ST5 6SS

Phone: 0845 345 7095Fax: 0845 345 7096

Email: [email protected]


Unit 3b, Aspect Court, Cannel RowSilverdale Enterprise Park

Newcastle under LymeStaffordshire, ST5 6SS

Phone: 0845 345 7095Fax: 0845 345 7096

Email: [email protected]: www.mainlineproducts.co.uk


mainlinemainlineproducts.co.uk/wp-content/uploads/2015/01/full-rainscreen... · in 2006 we focussed...

Documents