main and emergency-stop switches up to 250 a … main and emergency-stop switches up to 250 a ......

3LD Main and EMERGENCY-STOP Switches up to 250 ACatalog News LV 1 N • December 2008

SENTRON

Answers for industry.

lv1n_200812_3LD_umschlag_en.indd1 1lv1n_200812_3LD_umschlag_en.indd1 1 23.01.2009 15:13:1223.01.2009 15:13:12

© Siemens AG 2009© Siemens AG 2009

Low-Voltage ControlsSIRIUS · SENTRON · SIVACONOrder No.:CatalogE86060-K1002-A101-A8incl. PDF CD-ROMTechnical InformationE86060-T1002-A101-A8

LV 1

LV 1 T

Systems · Switchgear: Contactors and contactor assemblies, solid-state switching devices · Protection equipment · motor, soft starter and load feeders · monitoring and control devices · detecting devices · commanding and signaling devices · transformers · power supplies · planning and configuration with SIRIUS · Power Management System · SIVACON Power Distri-bution Boards, Busway and Cubicle Systems · SENTRON Switching and Protection Devices for Power Distribution: Air cir-cuit breakers, molded case circuit breakers, switch disconnec-tors, busbar systems· Software for power distribution · BETA low-voltage circuit-protection devices

Low-voltage controls and distributionSwitchgear and components forapplications according to ULOrder No.:E86060-K1816-A101-A2

LV 16 SIRIUS Circuit Breaker 3RV17 and 3RV18 according to UL 489/CSA C22.2 No.5-02· SIVACON components for feeder circuits · SENTRON air circuit breaker/non-automatic air circuit breaker 3WL5 according to UL 489/IEC 60947-2· SENTRON 3VL molded case circuit breakers according to UL 489/IEC 60947-2 · ALPHA devices according to UL standard · BETA devices

SIMATIC NETIndustrial communicationOrder No.:E86060-K6710-A101-B6 IK PI

PROFINET/Industrial Ethernet · Industrial Wireless Communicaton · PROFIBUS · SIMATIC ET 200 distributed peripherals · AS-Interface · Telecontrol · Routers · ECOFAST system

SIVACONCubicle systems andcubicle air-conditioningOrder No.:E86060-K1920-A101-A4

LV 50 System Cubicles · Cubicle Modifications · Cubicle Expansion Components · Accessories · Special Cubicles · Cubicle solu-tions in operation · Cubicle Air-Conditioning · Special colors

SIDACReactors and filtersOrder No.:E86060-K2803-A101-A4

LV 60 Commutating reactors for converters · Mains reactors for frequency converters · iron output reactors · ferrite output reactors · iron smoothing reactors · iron smoothing reactors · filter reactors · application-specific reactors · radio interference suppression filters

SIVACON 8PSBusbar trunking systems CD-L, BD01, BD2 to 1250 AOrder No.:E86060-K1870-A101-A4

LV 70 Busbar Trunking Systems, Overview · CD-L system (25 A to 40 A) · BD01 system (40 A to 160 A) · BD2 system (160 A to 1250 A)

The Offline MallOrder No.:E86060-D4001-A500-C7 (DVD)

CA 01 All products of automation, operating mechanism and installation technology, incl. the products from the catalogs mentioned above.

The Online MallInternet:http://www.siemens.com/automation/mall

All products of automation, operating mechanism and installation technology, incl. the products from the catalogs mentioned above.

Catalog PDFInternet:http://www.automation.siemens.com/cd

All catalogs for low-voltage controls can be downloaded as PDF files.

Trademarks Technical Assistance

All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.More information on low-voltage controls is available on the Internet at:http://www.siemens.com/lowvoltage

Competent expert advice for low-voltage controls and electrical wiring.Tel.: +49 (9 11) 8 95-59 00Fax: +49 (9 11) 8 95-59 07E-mail: [email protected]

Related catalogs Contents

Buch_LV1_N_3LD_12_2008_EN.book Seite 1 Freitag, 23. Januar 2009 3:46 15

© Siemens AG 2009

SENTRON3LD Main and EMERGENCY-STOP Switches up to 250 A

Catalog News LV 1 N · 12/2008

Contact your local Siemens sales officefor further information

© Siemens AG 2008


© Siemens AG 2009

LV1N_3NP1_12_2008_eng.book Seite 2 Montag, 19. Januar 2009 2:08 14


1 IntroductionAnswers for Industry.

Low-voltage controls and distribution.The basis for advanced solutions.

PG

104

, 400

, 401

11 Power Supplies4AV Non-Stabilized Power Supplies6EP Stabilized Power Supplies- LOGO!Power- SITOP

S I R

I U

S

I n d

u s

t r i

a l

C o

n t

r o l

s P

G 0

41, 1

01, 1

21, 2

30, 2

50, 5

40 ..

.

2 SystemsAS-Interface IO-Link ECOFAST SystemSIRIUS Safety Integrated PROFIBUSSIRIUS Modular System P

G 12

1, 1

31, 2

00

12 Engineering SoftwarePlanning and Configuration with SIRIUSMotor Starter ES ECOFAST ESSIMOCODE ES Modular Safety System ESSoft Starter ES

PG 0

41, 1

01, 1

21

3 Controls – Contactors and Contactor Assemblies3RT, 3TB, 3TF Contactors for Switching Motors3RA13, 3RA14, 3TD, 3TE Contactor Assemblies3RT, 3RH, 3TB, 3TC, 3TH, 3TK Contactors for Special Applications3RH, 3TH Contactor Relays · 3RT Coupling Relays3TX7, 3RS18 Coupling Relays · Coupling Relays with LZS, LZX Plug-In Relays · 3TG10 Power Relays/Miniature Contactors

L o

w -

V o

l t a

g e

P

o w

e r

D i

s t r

i b

u t i

o n

PG 1

33

13 Power Management SystemSystem OverviewSENTRON PAC3200 Multifunction Measuring Instruments

PG 0

41, 1

01

4 Controls – Solid-State Switching DevicesFor switching resistive loads:3RF20, 3RF21, 3RF22 Solid-State Relays3RF23, 3RF24 Solid-State Contactors · 3RF29 Function Modules

For switching motors:3RF24 Solid-State Contactors and Solid-State Reversing Contactors

PG 0

16, 1

03

14 SIVACON Power Distribution Boards, Busway Systems and Cubicle SystemsS8, 8PV and 8PT Power Distribution Boards and Motor Control Centers 8PS Busbar Trunking Systems · 8MC, 8MF Cubicle Systems8MR, 8ME Cubicle Air-ConditioningALPHA Distribution BoardsALPHA FIX Terminal Blocks

PG

041,

044

, 101

, 102

, 143 5 Protection Equipment

3RV Motor Starter Protectors/Circuit Protectors up to 100 A3RV Molded Case Motor Starter Protectors up to 800 A3RU1 Thermal Overload Relays3RB2 Solid-State Overload Relays

PG 1

03, 1

33

15 SENTRON Switching and Protection Devicesfor Power Distribution3WL Air Circuit Breakers

PG

041,

101

, 102

, 103

, 121

, 131

...

6 Motor Starters, Soft Starters and Load Feeders3RW Soft Starters 3RA1 Fuseless Load Feeders3RA6 Compact Feeders ET 200S Motor StartersET 200S Safety Motor Starter Solutions Local/PROFIsafeET 200pro Motor Starters · AS-Interface Compact Starters, 400 V ECOFAST Motor Starters and Soft Starters · 3RE Encapsulated Starters · Motor Starters, 24 V DC PG

101

, 102

, 103

, 113

, 131

, 250 16 SENTRON Switching and Protection Devices

for Power Distribution3VL, 3VF2 Molded Case Circuit Breakers

PG

101

, 102

, 121

, 131

, 192

, 200

...

7 Monitoring and Control DevicesSIMOCODE 3UF Motor Management and Control Devices LOGO! Logic Modules · 3RP, 3RT19 Timing Relays3UG Monitoring Relays for Electrical and Additional Measurements 3RS10, 3RS11 Temperature Monitoring Relays3RN1 Thermistor Motor Protection3TK28 Safety Relays 3RK3 Modular Safety System 3RS17 Interface Converters PG

013

, 046

, 101

, 102

, 103

, 113

, 143 17 SENTRON Switching and Protection Devices

for Power Distribution3KA, 3KE, 3LD Switch Disconnectors 3KL, 3KM, 3NJ6 Switch Disconnectors with Fuses3NP, 3NJ4, 3NJ5 Fuse Switch DisconnectorsSENTRON 8US Busbar Systems

PG 1

02, 1

21, 5

74

8 Detecting Devices3SE2, 3SE3, 3SE5, 3SF1 Position Switches3SE2, 3SE5, 3SF1 Hinge Switches3SE6 Magnetically Operated Switches

PG 1

33

18 Software for Power DistributionDimensioning with SIMARIS designConfiguring, Visualizing and Controlling with SIMATIC Configuring, Visualizing and Controlling with SENTRON

PG 1

01, 1

02, 1

21

9 Commanding and Signaling Devices3SB2, 3SB3, 3SF5 Pushbutton Units and Indicator Lights3SE7, 3SF2 Cable-Operated Switches3SE2, 3SE3 Foot Switches8WD4 Signaling Columns8WD5 Integrated Signal Lamps

PG 0

01, 0

02, 0

03, 0

04, 0

05, 0

07 ..

.

19 BETA Low-Voltage Circuit ProtectionMiniature Circuit BreakersResidual Current Protective Devices Low-Voltage Fuse SystemsSITOR Semiconductor FusesSR 60 Busbar SystemsOvervoltage Protection DevicesSocket OutletsMeasuring Devices

PG

104

, 114

10 TransformersSingle-Phase TransformersThree-Phase Transformers

20 AppendixGlossary · Training · Order information · Further documenta-tion · Standards and approvals · Quality management Siemens contacts · External partners · Online servicesCustomer supportSoftware licenses · Subject index · Order number index includ-ing metal surcharges and export markings · Terms and condi-tions of sale and delivery, export regulations

New


© Siemens AG 2009

4 Siemens LV 1 N Main and EMERGENCY-STOP Switches · 12/2008

Explanations

■ General information

Delivery time class (DT)

} Preferred type

A 2 working days

B 1 week

C 3 weeks

D 6 weeks

X On request

Preferred types are available immediately from stock, i.e. are dispatched within 24 hours.

Normal quantities of the products are usually deliv-ered within the specified time following receipt of your order at our branch.

In exceptional cases, the actual delivery time may differ from that specified.

The delivery times apply up to the ramp at Siemens AG (products ready for dispatch). The transport times depend on the destination and type of shipping. The standard transport time for Germany is 1 day.

The delivery times specified here represent the state of 10/2008. They are permanently optimized. Up-to-date information can be found at http://www.siemens.com/automation/mall.

Price units (PU)

The price unit defines the number of units, sets or meters to which the specified price and weight apply.

Packaging sizes (PS)

The packaging size defines the number, e.g. of units, sets or meters, for outer packaging.

Only the quantity defined by the packaging size or a multiple thereof can be ordered!

For multi-unit packing and reusable packaging see Appendix

Price groups (PG)

Each product is assigned to a price group.

Weight

The defined weight in kg refers to the price unit (PU).

Dimensions

All dimensions in mm.


© Siemens AG 2009

5Siemens LV 1 N Main and EMERGENCY-STOP Switches · 12/2008

Explanations

■ ATEX explosion protection

In many industries the production, processing, transport and storage of combustible substances are accompanied by escap-ing gases, vapor or spray which find their way into the environ-ment. Other processes result in combustible dust. Together with the oxygen in the air, the result can be an explosive atmosphere which will explode if ignited.

Serious injury to persons and damage to property can result par-ticularly in the chemical and petrochemical industry, mineral oil and natural gas production, mining, mills (e.g. grain, solid mate-rials) and many other sectors.

To guarantee the maximum possible safety in these areas, the legislators of most countries have drawn up requirements in the form of laws, regulations and standards. In the course of global-ization, great progress has been made with regard to uniform di-rectives for explosion protection.

With Directive 94/9/EC, the European Union laid the foundations for complete harmonization by requiring that all new devices as from 1st July 2003 have to be approved in accordance with this directive.

In this catalog, special attention is drawn to devices which com-ply with the ATEX Directive. However, it does not replace inten-sive study of the relevant fundamentals and directives when planning and installing electrical systems.

■ UL-certified devices

UL standards are applied in North America and a number of other countries. This is important in particular for European ex-ports of electrical switchgear and machine-integrated equip-ment, above all to the USA. Acceptance and delivery are possi-ble only if the relevant UL standards are satisfied.

UL 508A "Standard for Industrial Control Panels" describes the design of control cabinets and implementation of integral com-ponents with reference to other pertinent UL standards where applicable. As such, this standard represents the basis for all electrical systems used in North America.

Our consideration of both IEC directives as well as UL standards as early as in our products’ development phase results in a broad portfolio of UL-certified products for low-voltage switching and protection technology.

Whether SENTRON circuit breakers, SIRIUS switching devices – including motor-protective circuit breakers, starters, contactors and overload relays –, SENTRON switch disconnectors, SIRIUS detecting and command devices, busbar systems, terminals, miniature circuit breakers, fuses or SIRIUS transformers and fil-ters – our portfolio of low-voltage controls and distribution

products ensures your being on the safe side in terms of UL and facilitates the easy and fast assembly of control cabinets ac-cording to UL.

Our UL-certified portfolio can be found partly in this catalog and in greater concentration in Catalog LV 16, "Controls and Compo-nents for Applications According to UL".


© Siemens AG 2009


Explanations

■ Order number index and export markings

Order No. Export markings

Page

ECCN AL

3LD 3LD20 03-0 N N 17/4

3LD20 03-1TL N N 17/4

3LD20 03-1TP N N 17/5

3LD20 03-2 N N 17/5

3LD20 13-0 N N 17/10 ... 11

3LD20 13-1 N N 17/10, 17/12

3LD20 17 N N 17/15

3LD20 2 N N 17/7

3LD20 3 N N 17/16 ... 17

3LD20 4 N N 17/10, 17/13

3LD20 5 N N 17/4, 17/6, 17/8

3LD20 6 N N 17/18

3LD21 03-0 N N 17/4

3LD21 03-1 N N 17/4 ... 5

3LD21 03-2 N N 17/5

3LD21 03-3 N N 17/9

3LD21 03-4 N N 17/9

3LD21 13-0 N N 17/10 ... 11

3LD21 13-1 N N 17/10, 17/12

3LD21 13-3 N N 17/14

3LD21 13-4 N N 17/14

3LD21 22 N N 17/7

3LD21 23 N N 17/9

3LD21 3 N N 17/16 ... 17

3LD21 4 N N 17/10, 17/13

3LD21 5 N N 17/4, 17/6, 17/8

3LD21 6 N N 17/18 ... 20

3LD22 03-0 N N 17/4

3LD22 03-1 N N 17/4 ... 5

3LD22 03-3 N N 17/9

3LD22 13-0 N N 17/10 ... 11

3LD22 13-1 N N 17/10, 17/12

3LD22 17 N N 17/15

3LD22 22 N N 17/7

3LD22 23 N N 17/9

3LD22 3 N N 17/16 ... 17

3LD22 4 N N 17/10, 17/13

3LD22 5 N N 17/4, 17/6, 17/8

3LD22 6 N N 17/18 ... 20

3LD23 05-0 EAR99 N 17/4 ... 5

3LD23 05-1 EAR99 N 17/4 ... 5

3LD23 05-3 EAR99 N 17/9

3LD23 05-7 EAR99 N 17/9

3LD23 18-0 EAR99 N 17/10 ... 11

3LD23 18-1 EAR99 N 17/10, 17/12

3LD23 18-3 EAR99 N 17/14

3LD24 05-0 N N 17/4 ... 5

3LD24 05-1 EAR99 N 17/4 ... 5

3LD24 05-3 EAR99 N 17/9

3LD24 05-7 EAR99 N 17/9

3LD24 18-0 EAR99 N 17/10 ... 11

3LD24 18-1 EAR99 N 17/10, 17/12

3LD24 18-3 EAR99 N 17/14

3LD25 04-0 N N 17/4

3LD25 04-1 N N 17/4 ... 5

3LD25 04-3 N N 17/9

3LD25 14-0 N N 17/10 ... 11

3LD25 14-1 N N 17/10, 17/12

3LD25 17 N N 17/15

3LD25 2 N N 17/9

3LD25 3 N N 17/16 ... 17

3LD25 4 N N 17/10, 17/13

3LD25 5 N N 17/4, 17/6

3LD25 6 N N 17/18 ... 20

3LD27 04-0 N N 17/4 ... 5

3LD27 04-1 N N 17/5

3LD27 1 N N 17/10 ... 12

3LD27 2 N N 17/9

3LD27 3 N N 17/16 ... 17

3LD27 6 N N 17/18, 17/20

3LD28 0 N N 17/4 ... 5

3LD28 1 N N 17/10 ... 12

3LD28 3 N N 17/16 ... 17

3LD28 6 N N 17/18

3LD92 00-2 N N 17/21

3LD92 00-5B N N 17/5 ... 8, 17/21 ... 25

3LD92 00-5BF N N 17/21 ... 25

3LD92 00-5C N N 17/11 ... 13, 17/16 ... 18, 17/21 ... 25

3LD92 00-5CF N N 17/21 ... 25

3LD92 01 N N 17/21

3LD92 05 N N 17/21 ... 22, 17/24 ... 25

3LD92 20-0B N N 17/7 ... 8, 17/22

3LD92 20-0C N N 17/16 ... 17, 17/22

3LD92 20-2 N N 17/22

3LD92 21 N N 17/22

3LD92 24 N N 17/21 ... 22

3LD92 40-0 N N 17/23

3LD92 40-2 EAR99 N 17/23

3LD92 41 EAR99 N 17/23

3LD92 43 EAR99 N 17/23

3LD92 45 EAR99 N 17/23

3LD92 50-0B N N 17/4 ... 6, 17/24

3LD92 50-0C N N 17/10, 17/13, 17/16 ... 17, 17/24


Page

ECCN AL


© Siemens AG 2009


Explanations

3LD92 50-2 N N 17/24

3LD92 51 N N 17/24

3LD92 56 N N 17/22, 17/24

3LD92 80-0B N N 17/4 ... 5, 17/25

3LD92 80-0C N N 17/10, 17/12, 17/16 ... 18, 17/25

3LD92 80-2 N N 17/25

3LD92 81 N N 17/25

3LD92 84 N N 17/24 ... 25

3LD92 86 N N 17/21 ... 25


Page

ECCN AL


© Siemens AG 2009


Explanations


© Siemens AG 2009

Siemens LV 1 N Main and EMERGENCY-STOP Switches · 12/2008

173KA, 3KE, 3LD Switch Disconnectors3LD Main and EMERGENCY-STOP Switches up to 250 AIntroduction

17/2 - Overview17/3 - Application

Front mounting17/4 - Selection and ordering data

Floor mounting17/10 - Selection and ordering data

Distribution board mounting17/16 - Selection and ordering data

Molded-plastic enclosures17/18 - Selection and ordering data

Accessories17/21 - Selection and ordering data

You will find technical information atwww.siemens.com/lowvoltage/supportunder:- Technical specifications- Manuals/operating instructions- Characteristic curves- Certificates

and configurators underwww.siemens.com/lowvoltage/configurators

SENTRON Switching and Protection DevicesSwitch Disconnectors

Catalog

Technical Information


© Siemens AG 2009

3KA, 3KE, 3LD Switch Disconnectors 3LD Main and EMERGENCY-STOP Switches up to 250 A

Introduction

17/2 Siemens LV 1 N Main and EMERGENCY-STOP Switches · 12/2008

17

■ Overview

✓ Available

-- Not available

Type 3LD20 3LD21 3LD22 3LD25 3LD27 3LD28 3LD23 3LD24

3LD main and EMERGENCY-STOP switches from 16 A to 250 ARated uninterrupted current Iu

At 35 °C ambient temperature

A 16 25 32 63 100 125 160 250

Rated operational voltage

Ue V 690 690 690 690 690 690 690 690

AC-3 motor load switches

Operational switching of individual motors

• At 220 ... 240 V kW 3.0 4.0 5.5 11.0 18.5 22.0 35.0 55.0

• At 380 ... 440 V kW 5.5 7.5 9.5 18.5 30.0 37.0 50.0 110.0

• At 660/690 V kW 5.5 7.5 9.5 15.0 22.0 30.0 37.0 45.0

AC-23A main control switches, repair switches

Frequent, but not operational switching of single motors

• At 220 ... 240 V kW 4.0 5.0 6.0 11.0 18.5 22.0 45.0 75.0

• At 380 ... 440 V kW 7.5 9.5 11.5 22.0 37.0 45.0 75.0 132.0

• At 660/690 V kW 7.5 9.5 11.5 18.5 30.0 37.0 45.0 55.0

Switch versions

Front mounting

• Central ✓ ✓ ✓ -- -- -- -- --

• Four-hole ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Floor mounting

• Central ✓ ✓ ✓ -- -- -- -- --

• Four-hole ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Distribution board mounting

✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Molded-plastic enclosures

• Metric glands ✓ ✓ ✓ ✓ ✓ ✓ -- --

Switch accessories

4th pole (N conductor) (leading switch-on, delayed switch-off)

✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

N terminals ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

PE terminals ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Auxiliary contact elements

• 1 NO + 1 NC ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓


© Siemens AG 2009

3KA, 3KE, 3LD Switch Disconnectors3LD Main and EMERGENCY-STOP Switches up to 250 A

Introduction

17/3Siemens LV 1 N Main and EMERGENCY-STOP Switches · 12/2008

17■ Application

The 3LD switches are used for switching main and auxiliary circuits, but also for switching induction motors and other loads during maintenance and repair work.

They are manually operated switch disconnectors according to IEC 60947-3/VDE 0660 Part 107 (EN 60947-3) and comply with the conditions for switch disconnectors.

The 3LD can be used as• ON-OFF switch• EMERGENCY-STOP switch• Main control switch according to EN 60204-1

In EN 60204-1 (VDE 0113 Part 1), main control switches are called "disconnector units", while EMERGENCY-STOP switches are termed "devices for emergency shutdown". Maintenance personnel can protect themselves against unauthorized startup with padlocks (up to three can be fitted).

The 3LD switches can be used in any mounting position.

The 3LD switches for 16 to 125 A are approved according to UL508 and can be used as "manual motor controllers" and "motor disconnects".

UL 508 approval of 3LD switches for 160 and 250 A is under application.

4

7

6

5

3

2

1

NS

G0_

0011

2a

3

8

1 4th contact (N conductor)

2 N or PE/ground terminal, continuous

3 Auxiliary switch 1 NO + 1 NC

4 Rotary operating mechanism, red/yellow

5 Rotary operating mechanism, black

6 Front plate, English/German

7 Terminal cover, three-pole

8 Terminal cover, one-pole


© Siemens AG 2009


Front mounting

17/4 Siemens LV 1 N Main and EMERGENCY-STOP Switches · 12/2008* You can order this quantity or a multiple thereof.

17

■ Selection and ordering data

1) 4th contact element as N conductor to be ordered separately, see "Accessories".

Number and version of the contact elements

Rated data at 50 Hz ... 60 Hz, 380 V ... 440 V

DT Order No. Price per PU

PU (UNIT, SET, M)

PS* PG Weight per PU approx.

Main contact elements


P/AC-3 P/AC-23A Iu/AC-21A

kW kW A kg

Main and EMERGENCY-STOP switches with rotary operating mechanism/selector switch operating mechanism• Lockable in 0 position with up to three padlocks

• Degree of protection at front side IP65

• All versions with rotary operating mechanism Exception: 3LD2 3 and 3LD2 4 with selector switch operating mechanism

• Including terminal cover for the infeed side

• Front plate- 3LD2 0, 3LD2 1, 3LD2 2: 67 mm × 67 mm- 3LD2 5 to 3LD2 8: 90 mm × 90 mm- 3LD2 3 to 3LD2 4: 96 mm × 96 mm

Four-hole mounting

3LD2 203-0TK53

3 -- 5.5 7.5 16 } 3LD2 003-0TK5@ 1 1 unit 103 0.207

7.5 9.5 25 } 3LD2 103-0TK5@ 1 1 unit 103 0.206

9.5 11.5 32 } 3LD2 203-0TK5@ 1 1 unit 103 0.206

18.5 22 63 } 3LD2 504-0TK5@ 1 1 unit 103 0.424

30 37 100 } 3LD2 704-0TK5@ 1 1 unit 103 0.501

37 45 125 A 3LD2 804-0TK5@ 1 1 unit 103 0.503

50 75 160 A 3LD2 305-0TK1@ 1 1 unit 103 0.503

110 132 250 A 3LD2 405-0TK1@ 1 1 unit 103 0.503

3 + N -- 5.5 7.5 16 } 3LD2 003-1TL5@ 1 1 unit 103 0.217

7.5 9.5 25 A 3LD2 103-1TL5@ 1 1 unit 103 0.243

9.5 11.5 32 A 3LD2 203-1TL5@ 1 1 unit 103 0.243

18.5 22 63 A 3LD2 504-1TL5@ 1 1 unit 103 0.424

30 37 100 } 3LD2 704-0TK5@ 1 1 unit 103 0.501+1)

} 3LD9 280-0B 1 1 unit 103 0.101

37 45 125 A 3LD2 804-0TK5@ 1 1 unit 103 0.503+1)

} 3LD9 280-0B 1 1 unit 103 0.101

50 75 160 A 3LD2 305-1TL1@ 1 1 unit 103 0.243

110 132 250 A 3LD2 405-1TL1@ 1 1 unit 103 0.243

Center-hole mounting Ø 22.5 mm3 -- 5.5 7.5 16 A 3LD2 054-0TK5@ 1 1 unit 103 0.215

7.5 9.5 25 A 3LD2 154-0TK5@ 1 1 unit 103 0.215

9.5 11.5 32 A 3LD2 254-0TK5@ 1 1 unit 103 0.214

18.5 22 63 A 3LD2 555-0TK5@ 1 1 unit 103 0.443

3 + N -- 5.5 7.5 16 A 3LD2 054-1TL5@ 1 1 unit 103 0.230

7.5 9.5 25 A 3LD2 154-1TL5@ 1 1 unit 103 0.256

9.5 11.5 32 A 3LD2 254-1TL5@ 1 1 unit 103 0.260

18.5 22 63 A 3LD2 555-0TK5@ 1 1 unit 103 0.443+1)

} 3LD9 250-0BA 1 1 unit 103 0.079

Actuator color>Black 1

Red/Yellow (EMERGENCY-STOP) 3


© Siemens AG 2009


Front mounting

17/5Siemens LV 1 N Main and EMERGENCY-STOP Switches · 12/2008* You can order this quantity or a multiple thereof.

17

1) Please order auxiliary switches 1 NO + 1 NC separately, see "Accessories".2) 4th contact element as N conductor to be ordered separately,

see "Accessories".




PU (UNIT, SET, M)




P/AC-23A Iu

kW A kg

Main and EMERGENCY-STOP switches with rotary operating mechanism/selector switch operating mechanism• Lockable in 0 position with up to three padlocks




• Front plate- 3LD2 0, 3LD2 1, 3LD2 2: 67 mm × 67 mm- 3LD2 5 to 3LD2 8: 90 mm × 90 mm- 3LD2 3 to 3LD2 4: 96 mm × 96 mm

Four-hole mounting

3LD2 203-0TK53

3 1 NO + 1 NC

7.5 16 A 3LD2 003-1TP5@ 1 1 unit 103 0.250

9.5 25 A 3LD2 103-1TP5@ 1 1 unit 103 0.249

11.5 32 A 3LD2 203-1TP5@ 1 1 unit 103 0.206

22 63 A 3LD2 504-1TP5@ 1 1 unit 103 0.424

37 100 A 3LD2 704-1TP5@ 1 1 unit 103 0.503

45 125 A 3LD2 804-1TP5@ 1 1 unit 103 0.503

75 160 A 3LD2 305-0TK1@ 1 1 unit 103 0.503+1)

} 3LD9 200-5B 1 1 unit 103 0.046

132 250 A 3LD2 405-0TK1@ 1 1 unit 103 0.503+1)

} 3LD9 200-5B 1 1 unit 103 0.046

3 + N 1 NO + 1 NC

7.5 16 A 3LD2 003-2EP5@ 1 1 unit 103 0.272

9.5 25 A 3LD2 103-2EP5@ 1 1 unit 103 0.287

11.5 32 A 3LD2 203-1TL5@ 1 1 unit 103 0.243+1)

} 3LD9 200-5B 1 1 unit 103 0.046

22 63 A 3LD2 504-1TP5@ 1 1 unit 103 0.424+2)

} 3LD9 250-0BA 1 1 unit 103 0.079

37 100 } 3LD2 704-0TK5@ 1 1 unit 103 0.501+2)

} 3LD9 280-0B 1 1 unit 103 0.101+1)

} 3LD9 200-5B 1 1 unit 103 0.046

45 125 A 3LD2 804-0TK5@ 1 1 unit 103 0.503+2)

} 3LD9 280-0B 1 1 unit 103 0.101+1)

} 3LD9 200-5B 1 1 unit 103 0.046

75 160 A 3LD2 305-1TL1@ 1 1 unit 103 0.243+1)

} 3LD9 200-5B 1 1 unit 103 0.046

132 250 A 3LD2 405-1TL1@ 1 1 unit 103 0.243+1)

} 3LD9 200-5B 1 1 unit 103 0.046




© Siemens AG 2009


Front mounting


17

1) Please order auxiliary switches 1 NO + 1 NC separately, see "Accessories".2) 4th contact element as N conductor to be ordered separately,

see "Accessories".




PU (UNIT, SET, M)




P/AC-23A Iu

kW A kg

Center-hole mounting Ø 22.5 mm3 1 NO +

1 NC7.5 16 A 3LD2 054-1TP5@ 1 1 unit 103 0.261

9.5 25 A 3LD2 154-1TP5@ 1 1 unit 103 0.257

11.5 32 A 3LD2 254-0TK5@ 1 1 unit 103 0.214+1)

} 3LD9 200-5B 1 1 unit 103 0.046

22 63 A 3LD2 555-0TK5@ 1 1 unit 103 0.443+1)

} 3LD9 200-5B 1 1 unit 103 0.046

3 + N 1 NO + 1 NC

7.5 16 A 3LD2 054-2EP5@ 1 1 unit 103 0.276

9.5 25 C 3LD2 154-2EP5@ 1 1 unit 103 0.304

11.5 32 A 3LD2 254-1TL5@ 1 1 unit 103 0.260+1)

} 3LD9 200-5B 1 1 unit 103 0.046

22 63 A 3LD2 555-0TK5@ 1 1 unit 103 0.443+2)

} 3LD9 250-0BA 1 1 unit 103 0.079+1)

} 3LD9 200-5B 1 1 unit 103 0.046




© Siemens AG 2009


Front mounting


17




PU (UNIT, SET, M)




P/AC-23A Iu

kW A kg

Main and EMERGENCY-STOP switches with selec-tor switch operating mechanism• Lockable in 0 position (can be modified to I position) with

max. two padlocks



• Front plate

- 48 mm × 48 mm

Four-hole mounting

3LD2 222-0TK11

3 -- 7.5 16 A 3LD2 022-0TK1@ 1 1 unit 103 0.186

9.5 25 A 3LD2 122-0TK1@ 1 1 unit 103 0.181

11.5 32 A 3LD2 222-0TK1@ 1 1 unit 103 0.182

3 + N -- 7.5 16 A 3LD2 022-1TL1@ 1 1 unit 103 0.206

9.5 25 A 3LD2 122-1TL1@ 1 1 unit 103 0.180

11.5 32 A 3LD2 222-0TK1@ 1 1 unit 103 0.182+1)

} 3LD9 220-0B 1 1 unit 103 0.039

3 1 NO + 1 NC 7.5 16 A 3LD2 022-0TK1@ 1 1 unit 103 0.186+2)

} 3LD9 200-5B 1 1 unit 103 0.046

9.5 25 A 3LD2 122-0TK1@ 1 1 unit 103 0.181+2)

} 3LD9 200-5B 1 1 unit 103 0.046

11.5 32 A 3LD2 222-0TK1@ 1 1 unit 103 0.182+2)

} 3LD9 200-5B 1 1 unit 103 0.046

3 + N 1 NO + 1 NC 7.5 16 A 3LD2 022-1TL1@ 1 1 unit 103 0.206+2)

} 3LD9 200-5B 1 1 unit 103 0.046

9.5 25 A 3LD2 122-1TL1@ 1 1 unit 103 0.180+2)

} 3LD9 200-5B 1 1 unit 103 0.046

11.5 32 A 3LD2 222-0TK1@ 1 1 unit 103 0.182+1)

} 3LD9 220-0B 1 1 unit 103 0.039+2)

} 3LD9 200-5B 1 1 unit 103 0.046


2) Please order auxiliary switches 1 NO + 1 NC separately, see "Accessories".




© Siemens AG 2009


Front mounting


17






PU (UNIT, SET, M)




P/AC-23A Iu

kW A kg

Center-hole mounting Ø 22.5 mm3 -- 7.5 16 A 3LD2 050-0TK1@ 1 1 unit 103 0.197

9.5 25 A 3LD2 150-0TK1@ 1 1 unit 103 0.191

11.5 32 A 3LD2 250-0TK1@ 1 1 unit 103 0.192

3 + N -- 7.5 16 A 3LD2 050-1TL1@ 1 1 unit 103 0.215

9.5 25 A 3LD2 150-0TK1@ 1 1 unit 103 0.191+1)

} 3LD9 200-5B 1 1 unit 103 0.046

11.5 32 A 3LD2 250-0TK1@ 1 1 unit 103 0.192+1)

} 3LD9 200-5B 1 1 unit 103 0.046

3 1 NO + 1 NC 7.5 16 A 3LD2 050-0TK1@ 1 1 unit 103 0.197+2)

} 3LD9 200-5B 1 1 unit 103 0.046

9.5 25 A 3LD2 150-0TK1@ 1 1 unit 103 0.191+2)

} 3LD9 200-5B 1 1 unit 103 0.046

11.5 32 A 3LD2 250-0TK1@ 1 1 unit 103 0.192+2)

} 3LD9 200-5B 1 1 unit 103 0.046

3 + N 1 NO + 1 NC 7.5 16 A 3LD2 050-1TL1@ 1 1 unit 103 0.215+2)

} 3LD9 200-5B 1 1 unit 103 0.046

9.5 25 A 3LD2 150-0TK1@ 1 1 unit 103 0.191+1)

} 3LD9 220-0B 1 1 unit 103 0.039+2)

} 3LD9 200-5B 1 1 unit 103 0.046

11.5 32 A 3LD2 250-0TK1@ 1 1 unit 103 0.192+1)

} 3LD9 220-0B 1 1 unit 103 0.039+2)

} 3LD9 200-5B 1 1 unit 103 0.046




© Siemens AG 2009


Front mounting


17




PU (UNIT, SET, M)




P/AC-3 P/AC-23A Iu

kW kW A kg

3LD2 103-3VK53

Main and EMERGENCY-STOP switches with rotary operating mechanism/selector switch operating mechanism • Lockable in 0 position with up to three padlocks




• Front plate- 3LD2 0, 3LD2 1, 3LD2 2: 67 mm × 67 mm- 3LD2 5: 90 mm × 90 mm- 3LD2 3 to 3LD2 4: 96 mm × 96 mm

6 -- 7.5 9.5 25 A 3LD2 103-3VK5@ 1 1 unit 103 0.380

9.5 11.5 32 A 3LD2 203-3VK5@ 1 1 unit 103 0.381

18.5 22.0 63 A 3LD2 504-3VK5@ 1 1 unit 103 0.854

50 75 160 A 3LD2 305-3VK1@ 1 1 unit 103 0.243

110 132 250 A 3LD2 405-3VK1@ 1 1 unit 103 0.243

6 1 NO + 1 NC

7.5 9.5 25 A 3LD2 103-4VP5@ 1 1 unit 103 0.432






PU (UNIT, SET, M)




P/AC-3 P/AC-23A Iu

kW kW A kg

3LD2 123-7UK01

Changeover switches with selector switch operating mechanism• Black actuator

• Selector switch operating mechanism on 3LD2 3 and 3LD2 4 is lockable,on all other versions it is non-lockable


3 -- 7.5 9.5 25 A 3LD2 123-7UK01 1 1 unit 103 0.374

9.5 11.5 32 A 3LD2 223-7UK01 1 1 unit 103 0.378

18.5 22.0 63 A 3LD2 524-7UK01 1 1 unit 103 0.841

30.0 37.0 100 A 3LD2 724-7UK01 1 1 unit 103 1.061

50 75 160 A 3LD2 305-7UK01 1 1 unit 103 0.374

110 132 250 A 3LD2 405-7UK01 1 1 unit 103 0.374

4 50 75 160 A 3LD2 305-7UL01 1 1 unit 103 0.374

110 132 250 A 3LD2 405-7UL01 1 1 unit 103 1.061


© Siemens AG 2009


Floor mounting


17






PU (UNIT, SET, M)




P/AC-23A Iu

kW A kg

Main and EMERGENCY-STOP switches with door-coupling rotary operating mechanism• With shaft

• Lockable in 0 position with up to three padlocks


• Door-coupling rotary operating mechanism with integrated tolerance compensation (16 A to 125 A)


• Mounting using screws or snap-on mounting on 35 mm standard mounting rail (16 A to 125 A)


• Front plate

- 3LD2 0, 3LD2 1, 3LD2 2: 67 mm × 67 mm

- 3LD2 5 to 3LD2 8: 90 mm × 90 mm

- 3LD2 3 to 3LD2 4: 96 mm × 96 mm

• Mounting dimensions

- 3LD2 0, 3LD2 1, 3LD2 2: 380 mm

- 3LD2 5 to 3LD2 8: 390 mm

- 3LD2 3 to 3LD2 4: 600 mm

Four-hole mounting

3LD2 213-0TK53

3 -- 7.5 16 } 3LD2 013-0TK5@ 1 1 unit 103 0.412

9.5 25 } 3LD2 113-0TK5@ 1 1 unit 103 0.407

11.5 32 } 3LD2 213-0TK5@ 1 1 unit 103 0.405

22 63 } 3LD2 514-0TK5@ 1 1 unit 103 0.655

37 100 } 3LD2 714-0TK5@ 1 1 unit 103 0.765

45 125 A 3LD2 814-0TK5@ 1 1 unit 103 0.766

75 160 A 3LD2 318-0TK1@ 1 1 unit 103 0.503

132 250 A 3LD2 418-0TK1@ 1 1 unit 103 0.503

3 + N -- 7.5 16 } 3LD2 013-1TL5@ 1 1 unit 103 0.412

9.5 25 A 3LD2 113-1TL5@ 1 1 unit 103 0.450

11.5 32 A 3LD2 213-1TL5@ 1 1 unit 103 0.446

22 63 A 3LD2 514-1TL5@ 1 1 unit 103 0.720

37 100 } 3LD2 714-0TK5@ 1 1 unit 103 0.765+1)

} 3LD9 280-0C 1 1 unit 103 0.102

45 125 A 3LD2 814-0TK5@ 1 1 unit 103 0.766+1)

} 3LD9 280-0C 1 1 unit 103 0.102

75 160 A 3LD2 318-1TL1@ 1 1 unit 103 0.503

132 250 A 3LD2 418-1TL1@ 1 1 unit 103 0.503

Center-hole mounting Ø 22.5 mm3 -- 7.5 16 A 3LD2 044-0TK5@ 1 1 unit 103 0.430

9.5 25 A 3LD2 144-0TK5@ 1 1 unit 103 0.426

11.5 32 A 3LD2 244-0TK5@ 1 1 unit 103 0.427

22 63 A 3LD2 545-0TK5@ 1 1 unit 103 0.710

3 + N -- 7.5 16 A 3LD2 044-1TL5@ 1 1 unit 103 0.433

9.5 25 A 3LD2 144-1TL5@ 1 1 unit 103 0.461

11.5 32 A 3LD2 244-1TL5@ 1 1 unit 103 0.465

22 63 A 3LD2 545-0TK5@ 1 1 unit 103 0.710+1)

} 3LD9 250-0CA 1 1 unit 103 0.080




© Siemens AG 2009


Floor mounting


17






PU (UNIT, SET, M)




P/AC-23A Iu

kW A kg

Main and EMERGENCY-STOP switches with door-coupling rotary operating mechanism• With shaft



• Door-coupling rotary operating mechanism with integrated tolerance compensation (16 A to 125 A)


• Mounting using screws or snap-on mounting on 35 mm standard mounting rails (16 A to 125 A)


• Front plate

- 3LD2 0, 3LD2 1, 3LD2 2: 67 mm × 67 mm

- 3LD2 5 to 3LD2 8: 90 mm × 90 mm

- 3LD2 3, 3LD2 4: 96 mm × 96 mm

• Mounting dimensions

- 3LD2 0, 3LD2 1, 3LD2 2: 380 mm

- 3LD2 5 to 3LD2 8: 390 mm

- 3LD2 3, 3LD2 4: 600 mm

Four-hole mounting

3LD2 213-0TK53

3 1 NO + 1 NC

7.5 16 } 3LD2 013-0TK5@ 1 1 unit 103 0.412

+2)

} 3LD9 200-5C 1 1 unit 103 0.046

9.5 25 } 3LD2 113-0TK5@ 1 1 unit 103 0.407+2)

} 3LD9 200-5C 1 1 unit 103 0.046

11.5 32 } 3LD2 213-0TK5@ 1 1 unit 103 0.405+2)

} 3LD9 200-5C 1 1 unit 103 0.046

22 63 } 3LD2 514-0TK5@ 1 1 unit 103 0.655+2)

} 3LD9 200-5C 1 1 unit 103 0.046

37 100 } 3LD2 714-0TK5@ 1 1 unit 103 0.765+2)

} 3LD9 200-5C 1 1 unit 103 0.046

45 125 A 3LD2 814-0TK5@ 1 1 unit 103 0.766+2)

} 3LD9 200-5C 1 1 unit 103 0.046

75 160 A 3LD2 318-0TK1@ 1 1 unit 103 0.503+1)

} 3LD9 200-5C 1 1 unit 103 0.046

132 250 A 3LD2 418-0TK1@ 1 1 unit 103 0.503+1)

} 3LD9 200-5C 1 1 unit 103 0.046




© Siemens AG 2009


Floor mounting


17






PU (UNIT, SET, M)




P/AC-23A Iu

kW A kg

3 + N 1 NO + 1 NC

7.5 16 } 3LD2 013-1TL5@ 1 1 unit 103 0.412

+2)

} 3LD9 200-5C 1 1 unit 103 0.046

9.5 25 A 3LD2 113-1TL5@ 1 1 unit 103 0.450+2)

} 3LD9 200-5C 1 1 unit 103 0.046

11.5 32 A 3LD2 213-1TL5@ 1 1 unit 103 0.446+2)

} 3LD9 200-5C 1 1 unit 103 0.046

22 63 A 3LD2 514-1TL5@ 1 1 unit 103 0.720+2)

} 3LD9 200-5C 1 1 unit 103 0.046

37 100 } 3LD2 714-0TK5@ 1 1 unit 103 0.765+1)

} 3LD9 280-0C 1 1 unit 103 0.102+2)

} 3LD9 200-5C 1 1 unit 103 0.046

45 125 A 3LD2 814-0TK5@ 1 1 unit 103 0.766+1)

} 3LD9 280-0C 1 1 unit 103 0.102+2)

} 3LD9 200-5C 1 1 unit 103 0.046

75 160 A 3LD2 318-1TL1@ 1 1 unit 103 0.503+2)

} 3LD9 200-5C 1 1 unit 103 0.046

132 250 A 3LD2 418-1TL1@ 1 1 unit 103 0.503+2)

} 3LD9 200-5C 1 1 unit 103 0.046




© Siemens AG 2009


Floor mounting


171) 4th contact element as N conductor to be ordered separately,

see "Accessories".2) Please order auxiliary switches 1 NO + 1 NC separately, see "Accessories".




PU (UNIT, SET, M)


Main contactelements


P/AC-23A Iu

kW A kg

Main and EMERGENCY-STOP switches with door-coupling rotary operating mechanism• With 300 mm switch shaft



• Door-coupling rotary operating mechanism with integrated tolerance compensation


• Front plate- 3LD2 0, 3LD2 1, 3LD2 2: 67 mm × 67 mm- 3LD2 5 to 3LD2 8: 90 mm × 90 mm

Center-hole mounting Ø 22.5 mm3 1 NO +

1 NC7.5 16 A 3LD2 044-0TK5@ 1 1 unit 103 0.430

+2)

} 3LD9 200-5C 1 1 unit 103 0.046

9.5 25 A 3LD2 144-0TK5@ 1 1 unit 103 0.426+2)

} 3LD9 200-5C 1 1 unit 103 0.046

11.5 32 A 3LD2 244-0TK5@ 1 1 unit 103 0.427+2)

} 3LD9 200-5C 1 1 unit 103 0.046

22 63 A 3LD2 545-0TK5@ 1 1 unit 103 0.710+2)

} 3LD9 200-5C 1 1 unit 103 0.046

3 + N 1 NO + 1 NC

7.5 16 A 3LD2 044-1TL5@ 1 1 unit 103 0.433

+2)

} 3LD9 200-5C 1 1 unit 103 0.046

9.5 25 A 3LD2 144-1TL5@ 1 1 unit 103 0.461+2)

} 3LD9 200-5C 1 1 unit 103 0.046

11.5 32 A 3LD2 244-1TL5@ 1 1 unit 103 0.465+2)

} 3LD9 200-5C 1 1 unit 103 0.046

22 63 A 3LD2 545-0TK5@ 1 1 unit 103 0.710+1)

} 3LD9 250-0CA 1 1 unit 103 0.080+2)

} 3LD9 200-5C 1 1 unit 103 0.046




© Siemens AG 2009


Floor mounting


17




PU (UNIT, SET, M)




P/AC-3 P/AC-23A Iu

kW kW A kg

Main and EMERGENCY-STOP switches with door-cou-pling rotary operating mechanism• Lockable in 0 position with up to three padlocks• Degree of protection at front side IP65

• Door-coupling rotary operating mechanism with integrated tolerance compensation (for 3LD21)

• All versions with rotary operating mechanism Exception: 3LD2 3 and 3LD2 4 with door-coupling rotary operating mechanism as selector switch

• Mounting using screws or snap-on mounting on 35 mm standard mounting rail


• Front plate- 3LD2 0, 3LD2 1, 3LD2 2: 67 mm × 67 mm- 3LD2 3, 3LD2 4: 96 mm × 96 mm

Four-hole mounting6 -- 7.5 9.5 25 C 3LD2 113-3VK5@ 1 1 unit 103 0.604

6 -- 50 75 160 A 3LD2 318-3VK1@ 1 1 unit 103 0.503

6 -- 110 132 250 A 3LD2 418-3VK1@ 1 1 unit 103 0.503

6 1 NO + 1 NC

9.5 9.5 25 C 3LD2 113-4VP5@ 1 1 unit 103 0.645






PU (UNIT, SET, M)




P/AC-3 P/AC-23A Iu

kW kW A kg

Changeover switches with door-coupling rotary operating mechanism• Lockable in 0 position with up to three padlocks

• Handle and cover black

• Door-coupling rotary operating mechanisms as selector switch


3 50 75 160 A 3LD2 318-7UK01 1 1 unit 103 1.061

3 110 132 250 A 3LD2 418-7UK01 1 1 unit 103 1.061

4 50 75 160 A 3LD2 318-7UL01 1 1 unit 103 1.061

4 110 132 250 A 3LD2 418-7UL01 1 1 unit 103 1.061


© Siemens AG 2009


Floor mounting


17

1) Auxiliary contact elements and miscellaneous accessories to be ordered separately, see "Accessories".




PU (UNIT, SET, M)




P/AC-23A Iu

kW A kg

Main and EMERGENCY-STOP switches with defeatable door-coupling rotary operating mechanismThe SENTRON 3LD main and EMERGENCY-STOP switch with defeatable door-coupling rotary operating mechanism enables you to conduct repairs, maintenance work or tests on electrical plants and machines without having to interrupt their operation. With the help of the defeatable door-coupling rotary operating mechanism, an electrician can bypass the interlock in ON position and open the control cabi-net door with the plant activated.

SENTRON 3LD main and EMERGENCY-STOP switches with defeatable door-coupling rotary operating mechanism are approved according to UL508.

• With 300 mm switch shaft



• Door-coupling rotary operating mechanism with integrated tolerance compensation

• Mounting using screws or snap-on mounting on 35 mm standard mounting rail


• Front plate 65 mm × 65 mm

Four-hole mounting

3LD2 017-0TK..

3 -- 7.5 16 C 3LD2 017-0TK1@ 1 1 unit 103 0.412

11.5 32 C 3LD2 217-0TK1@ 1 1 unit 103 0.412

22 63 C 3LD2 517-0TK1@ 1 1 unit 103 0.412

3 + N -- 7.5 16 C 3LD2 017-1TL1@ 1 1 unit 103 0.412

11.5 32 C 3LD2 217-1TL1@ 1 1 unit 103 0.412

22 63 C 3LD2 517-1TL1@ 1 1 unit 103 0.412




© Siemens AG 2009




17





PU (UNIT, SET, M)




P/AC-23A Iu

kW A kg

3LD2 530-0TK13

ON/OFF and EMERGENCY-STOP switches with masking plate and selector switch• With screw mounting

With snap-on mounting on 35 mm standard mounting rail (16 A to 125 A)

• Lockable in 0 position with up to 2 (160 A and 250 A: up to 3) padlocks


• Including terminal cover for the infeed and outgoing side (160 A and 250 A)

3 -- 7.5 16 A 3LD2 030-0TK1@ 1 1 unit 103 0.169

9.5 25 A 3LD2 130-0TK1@ 1 1 unit 103 0.171

11.5 32 A 3LD2 230-0TK1@ 1 1 unit 103 0.168

22 63 A 3LD2 530-0TK1@ 1 1 unit 103 0.311

37 100 A 3LD2 730-0TK1@ 1 1 unit 103 0.379

45 125 A 3LD2 830-0TK1@ 1 1 unit 103 0.379

75 160 A 3LD2 330-0TK1@ 1 1 unit 103 0.503

132 250 A 3LD2 430-0TK1@ 1 1 unit 103 0.503

3 + N -- 7.5 16 A 3LD2 030-1TL1@ 1 1 unit 103 0.183

9.5 25 A 3LD2 130-0TK1@ 1 1 unit 103 0.171+1)

} 3LD9 220-0C 1 1 unit 103 0.039

11.5 32 A 3LD2 230-0TK1@ 1 1 unit 103 0.168+1)

} 3LD9 220-0C 1 1 unit 103 0.039

22 63 A 3LD2 530-0TK1@ 1 1 unit 103 0.311+1)

} 3LD9 250-0CA 1 1 unit 103 0.080

37 100 A 3LD2 730-0TK1@ 1 1 unit 103 0.379+1)

} 3LD9 280-0C 1 1 unit 103 0.102

45 125 A 3LD2 830-0TK1@ 1 1 unit 103 0.379+1)

} 3LD9 280-0C 1 1 unit 103 0.102

75 160 A 3LD2 330-0TK1@ 1 1 unit 103 0.503+1)

} 3LD9 240-0C 1 1 unit 103 0.080

132 250 A 3LD2 430-0TK1@ 1 1 unit 103 0.503+1)

} 3LD9 240-0C 1 1 unit 103 0.080

1) 4th contact element as N conductor to be ordered separately, see "Accessories for floor mounting".




© Siemens AG 2009




17




PU (UNIT, SET, M)




P/AC-23A Iu

kW A kg

3 1 NO + 1 NC 7.5 16 A 3LD2 030-0TK1@ 1 1 unit 103 0.169+2)

} 3LD9 200-5C 1 1 unit 103 0.046

9.5 25 A 3LD2 130-0TK1@ 1 1 unit 103 0.171+2)

} 3LD9 200-5C 1 1 unit 103 0.046

11.5 32 A 3LD2 230-0TK1@ 1 1 unit 103 0.168+2)

} 3LD9 200-5C 1 1 unit 103 0.046

22 63 A 3LD2 530-0TK1@ 1 1 unit 103 0.311+2)

} 3LD9 200-5C 1 1 unit 103 0.046

37 100 A 3LD2 730-0TK1@ 1 1 unit 103 0.379+2)

} 3LD9 200-5C 1 1 unit 103 0.046

45 125 A 3LD2 830-0TK1@ 1 1 unit 103 0.379+2)

} 3LD9 200-5C 1 1 unit 103 0.046

75 160 A 3LD2 330-0TK1@ 1 1 unit 103 0.503+2)

} 3LD9 200-5C 1 1 unit 103 0.046

132 250 A 3LD2 430-0TK1@ 1 1 unit 103 0.503+2)

} 3LD9 200-5C 1 1 unit 103 0.046

3 + N 1 NO + 1 NC 7.5 16 A 3LD2 030-1TL1@ 1 1 unit 103 0.183+2)

} 3LD9 200-5C 1 1 unit 103 0.046

9.5 25 A 3LD2 130-0TK1@ 1 1 unit 103 0.171+2)

} 3LD9 200-5C 1 1 unit 103 0.046+1)

} 3LD9 220-0C 1 1 unit 103 0.039

11.5 32 A 3LD2 230-0TK1@ 1 1 unit 103 0.168+2)

} 3LD9 200-5C 1 1 unit 103 0.046+1)

} 3LD9 220-0C 1 1 unit 103 0.039

22 63 A 3LD2 530-0TK1@ 1 1 unit 103 0.311+2)

} 3LD9 200-5C 1 1 unit 103 0.046+1)

} 3LD9 250-0CA 1 1 unit 103 0.080

37 100 A 3LD2 730-0TK1@ 1 1 unit 103 0.379+2)

} 3LD9 200-5C 1 1 unit 103 0.046+1)

} 3LD9 280-0C 1 1 unit 103 0.102

45 125 A 3LD2 830-0TK1@ 1 1 unit 103 0.379+2)

} 3LD9 200-5C 1 1 unit 103 0.046+1)

} 3LD9 280-0C 1 1 unit 103 0.102

75 160 A 3LD2 330-0TK1@ 1 1 unit 103 0.503+2)

} 3LD9 200-5C 1 1 unit 103 0.046+1)

} 3LD9 240-0C 1 1 unit 103 0.080

132 250 A 3LD2 430-0TK1@ 1 1 unit 103 0.503+2)

} 3LD9 200-5C 1 1 unit 103 0.046+1)

} 3LD9 240-0C 1 1 unit 103 0.080






© Siemens AG 2009




17





Base terminal



PU (UNIT, SET, M)




P/AC-23A Iu

kW A kg

Main and EMERGENCY-STOP switches• With N- and/or PE-/ground base terminals


• Degree of protection IP65

• Rotary operating mechanisms with center-hole mounting

• For floor-mounted auxiliary switches

Metric screwed glands

3LD2 164-0TB53

3 -- PE + N 7.5 16 A 3LD2 064-0TB5@ 1 1 unit 103 0.463

PE + N 9.5 25 A 3LD2 164-0TB5@ 1 1 unit 103 0.463

PE + N 11.5 32 A 3LD2 264-0TB5@ 1 1 unit 103 0.465

PE + N 22 63 A 3LD2 565-0TB5@ 1 1 unit 103 0.906

PE + N 37 100 A 3LD2 766-0TB5@ 1 1 unit 103 1.890

PE + N 45 125 A 3LD2 866-0TB5@ 1 1 unit 103 1.890

3 + N -- PE 7.5 16 A 3LD2 064-1TC5@ 1 1 unit 103 0.453

PE 9.5 25 A 3LD2 164-1TC5@ 1 1 unit 103 0.487

PE 11.5 32 C 3LD2 264-1TC5@ 1 1 unit 103 0.500

PE 22 63 C 3LD2 565-1TC5@ 1 1 unit 103 0.960

PE + N 37 100 A 3LD2 766-0TB5@ 1 1 unit 103 1.890+1)

} 3LD9 280-0C 1 1 unit 103 0.102

PE + N 45 125 A 3LD2 866-0TB5@ 1 1 unit 103 1.890+1)

} 3LD9 280-0C 1 1 unit 103 0.102 3 1 NO +

1 NCN 7.5 16 A 3LD2 064-1GP5@ 1 1 unit 103 0.507

N 9.5 25 A 3LD2 164-1GP5@ 1 1 unit 103 0.501

N 11.5 32 A 3LD2 264-1GP5@ 1 1 unit 103 0.488

N 22 63 A 3LD2 565-1GP5@ 1 1 unit 103 0.935

N 37 100 A 3LD2 766-1GP5@ 1 1 unit 103 1.838

N 45 125 A 3LD2 866-1GP5@ 1 1 unit 103 1.843

3 + N 1 NO + 1 NC

PE 7.5 16 A 3LD2 064-1TC5@ 1 1 unit 103 0.453

+2)

} 3LD9 200-5C 1 1 unit 103 0.046

PE 9.5 25 A 3LD2 164-1TC5@ 1 1 unit 103 0.487+

} 3LD9 200-5C 1 1 unit 103 0.046

PE 11.5 32 C 3LD2 264-1TC5@ 1 1 unit 103 0.500+

} 3LD9 200-5C 1 1 unit 103 0.046

PE 22 63 C 3LD2 565-1TC5@ 1 1 unit 103 0.960+

} 3LD9 200-5C 1 1 unit 103 0.046

N 37 100 A 3LD2 766-1GP5@ 1 1 unit 103 1.838+

} 3LD9 280-0C 1 1 unit 103 0.102

N 45 125 A 3LD2 866-1GP5@ 1 1 unit 103 1.843+

} 3LD9 280-0C 1 1 unit 103 0.102




© Siemens AG 2009




17


Base terminal



PU (UNIT, SET, M)




P/AC-3 P/AC-23A Iu

kW kW A kg

Main and EMERGENCY-STOP switches with rotary operating mechanism• With N- and/or PE-/ground base terminals



3LD2 165-3VB53

6 -- PE + N 7.5 9.5 25 A 3LD2 165-3VB5@ 1 1 unit 103 0.880

PE + N 9.5 11.5 32 A 3LD2 265-3VB5@ 1 1 unit 103 0.878

PE + N 18.5 22.0 63 A 3LD2 566-3VB5@ 1 1 unit 103 2.105

6 1 NO + 1 NC

N 7.5 9.5 25 A 3LD2 165-4VD5@ 1 1 unit 103 0.914

N 9.5 11.5 32 A 3LD2 265-4VD5@ 1 1 unit 103 0.910

PE + N 18.5 22.0 63 A 3LD2 566-4VD5@ 1 1 unit 103 2.084



Mains voltage Rated current Ie at 800 V DC


PU (UNIT, SET, M)


Max. DC21A DC22A

V DC A A kg

Solar plant isolators• Molded-plastic enclosure IP65

• (WxHxD) 146 mm x 199 mm x 136 mm

• Conductor cross-sections:

- Solid and stranded 1.5 … 16 mm2

- Finely stranded with end sleeve up to 10 mm2)

• Lockable

3LD2 265-8VQ5.-0AF6

800 32 16 A 3LD2 265-8VQ5@-0AF6 1 1 unit 103 0.878




© Siemens AG 2009




17


Base terminal



PU (UNIT, SET, M)




P/AC-3 P/AC-23A Iu

kW kW A kg

Changeover switches with selector switch operating mechanism, selector switch cannot be locked• With N- and/or PE-/ground base terminals

• Black actuator



3LD2 165-7UB01

6 -- PE + N 7.5 9.5 25 A 3LD2 165-7UB01 1 1 unit 103 0.888

PE + N 9.5 11.5 32 A 3LD2 265-7UB01 1 1 unit 103 0.888

PE + N 18.5 22.0 63 A 3LD2 566-7UB01 1 1 unit 103 2.105

PE + N 30.0 37.0 100 A 3LD2 766-7UB01 1 1 unit 103 2.335


© Siemens AG 2009


Accessories


17


Version DT 3LD2 0 PU (UNIT, SET, M)


Order No. Price per PU kg

For front mounting

3LD9 200-2B

N or PE terminals } 3LD9 200-2B 1 1 unit 103 0.030Continuous

3LD9 200-5B

Auxiliary switchesFor mounting on the left and/or right, delayed switch-on, leading switch-off

1 NO + 1 NC } 3LD9 200-5B 1 1 unit 103 0.046

For mounting on the left and/or right, delayed switch-on, with gold-plate contacts for SIMATIC request, leading switch-off

1 NO + 1 NC C 3LD9 200-5BF 1 1 unit 103 0.028For floor mounting, distribution board mounting or 3LD molded-plastic enclosures

3LD9 200-2C

N or PE terminals } 3LD9 200-2C 1 1 unit 103 0.032Continuous

3LD9 200-5C


1 NO + 1 NC } 3LD9 200-5C 1 1 unit 103 0.046

For mounting on the left and/or right, delayed switch-on, with gold-plate contacts for SIMATIC request, leading switch-off

1 NO + 1 NC C 3LD9 200-5CF 1 1 unit 103 0.028

For front and floor mounting

3LD9 224-1B

Rotary operating mechanismsLockable in 0 position with up to three padlocks

• For four-hole mounting

- Black A 3LD9 224-1B 1 1 unit 103 0.072- Red/Yellow A 3LD9 224-3B 1 1 unit 103 0.075

• For center-hole mounting

- Black A 3LD9 224-1D 1 1 unit 103 0.080- Red/Yellow A 3LD9 224-3D 1 1 unit 103 0.081

Mounting tools

For center-hole mounting with nut A 3LD9 256-0A 1 5 units 103 0.027

Switching shafts 6 x 6 mm

Length 300 mm C 3LD9 205-0C 1 5 units 103 0.476

Length 600 mm C 3LD9 205-2C 1 5 units 103 0.476

3LD9 286-1A

Inscription labelsWith English/German inscription (MAIN SWITCH/HAUPTSCHALTER)

A 3LD9 286-1A 1 10 units 103 0.005

Without inscription A 3LD9 286-4A 1 10 units 103 0.054

3LD9 201-2A

Terminal covers as additional touch protection (also for distribution board mounting)

Can be snapped on at top and bottom

1-pole A 3LD9 201-2A 100 4 units 103 0.200

3/4-pole A 3LD9 201-1A 1 4 units 103 0.007


© Siemens AG 2009


Accessories


17

1) 3LD9 256-0A mounting tool available.

Version DT 3LD2 1 and 3LD2 2 PU (UNIT, SET, M)



For front mounting

3LD9 220-0B

4th contact (N conductor) } 3LD9 220-0B 1 1 unit 103 0.039Leading switch-on, delayed switch-off

3LD9 220-2B


3LD9 200-5B

Auxiliary switchesFor mounting on the left and/or right, delayed switch-on, leading switch-off• 1 NO + 1 NC } 3LD9 200-5B 1 1 unit 103 0.046

For mounting on the left and/or right, delayed switch-on, leading switch-off, with gold-plate contacts for SIMATIC request• 1 NO + 1 NC C 3LD9 200-5BF 1 1 unit 103 0.028

For floor mounting, distribution board mounting or 3LD molded-plastic enclosures

3LD9 220-0C

4th contact (N conductor) } 3LD9 220-0C 1 1 unit 103 0.039Leading switch-on, delayed switch-off


3LD9 200-5C

Auxiliary switchesFor mounting on the left and/or right, delayed switch-on, leading switch-off• 1 NO + 1 NC } 3LD9 200-5C 1 1 unit 103 0.046

For mounting on the left and/or right, delayed switch-on, leading switch-off, with gold-plate contacts for SIMATIC request• 1 NO + 1 NC C 3LD9 200-5CF 1 1 unit 103 0.028


3LD9 224-1B

Rotary operating mechanismsLockable in 0 position with up to three padlocks

• For four-hole mounting- Black A 3LD9 224-1B 1 1 unit 103 0.072- Red/Yellow A 3LD9 224-3B 1 1 unit 103 0.075

• For center-hole mounting1) - Black A 3LD9 224-1D 1 1 unit 103 0.080- Red/Yellow A 3LD9 224-3D 1 1 unit 103 0.081

Mounting tools

For center-hole mounting with nut A 3LD9 256-0A 1 5 units 103 0.027


• Length 300 mm C 3LD9 205-0C 1 5 units 103 0.476


3LD9 286-1A

Inscription labelsWith English/German inscription (MAIN SWITCH/HAUPTSCHALTER)

A 3LD9 286-1A 1 10 units 103 0.005

Without inscription A 3LD9 286-4A 1 10 units 103 0.054

3LD9 221-2A

Terminal covers as additional touch protection (also for distribution board mounting)Can be snapped on at top and bottom

• 1-pole A 3LD9 221-2A 100 4 units 103 0.100

3LD9 221-0A

• 3-pole A 3LD9 221-0A 1 4 units 103 0.007


© Siemens AG 2009


Accessories


17




For front mounting

3LD9 240-0B


3LD9 240-2B


3LD9 200-5B


• 1 NO + 1 NC } 3LD9 200-5B 1 1 unit 103 0.046

For mounting on the left and/or right, delayed switch-on, leading switch-off, with gold-plate contacts for SIMATIC request

• 1 NO + 1 NC C 3LD9 200-5BF 1 1 unit 103 0.028

For floor mounting

3LD9 240-0C


3LD9 240-2C


3LD9 200-5C


• 1 NO + 1 NC } 3LD9 200-5C 1 1 unit 103 0.046

For mounting on the left and/or right, delayed switch-on, leading switch-off, with gold-plate contacts for SIMATIC request

• 1 NO + 1 NC C 3LD9 200-5CF 1 1 unit 103 0.028


Selector switch operating mechanismsLockable in 0 position with up to three padlocks

• For four-hole mounting





3LD9 286-1A

Inscription labels

• With English/German inscription (MAIN SWITCH/HAUPTSCHALTER)

A 3LD9 286-1A 1 10 units 103 0.005

• Without inscription A 3LD9 286-4A 1 10 units 103 0.054

3LD9 241-2A


• 1-pole A 3LD9 241-2A 1 4 units 103 0.001


© Siemens AG 2009


Accessories


17

1) 3LD9 256-0A mounting tool available.

Version DT 3LD2 5 PU (UNIT, SET, M)



For front mounting

3LD9 250-0BA

4th contact (N conductor) } 3LD9 250-0BA 1 1 unit 103 0.079Leading switch-on, delayed switch-off

3LD9 250-2BA

N or PE terminals } 3LD9 250-2BA 1 1 unit 103 0.072Continuous

3LD9 200-5B

Auxiliary switchesFor mounting on the left and/or right, delayed switch-on, leading switch-off• 1 NO + 1 NC } 3LD9 200-5B 1 1 unit 103 0.046For mounting on the left and/or right, delayed switch-on, leading switch-off, with gold-plate contacts for SIMATIC request• 1 NO + 1 NC C 3LD9 200-5BF 1 1 unit 103 0.028


3LD9 250-0CA

4th contact (N conductor) } 3LD9 250-0CA 1 1 unit 103 0.080Leading switch-on, delayed switch-off

3LD9 250-2CA

N or PE terminals } 3LD9 250-2CA 1 1 unit 103 0.073Continuous

3LD9 200-5C

Auxiliary switchesFor mounting on the left and/or right, delayed switch-on, leading switch-off• 1 NO + 1 NC } 3LD9 200-5C 1 1 unit 103 0.046For mounting on the left and/or right, delayed switch-on, lead-ing switch-off, with gold-plate contacts for SIMATIC request• 1 NO + 1 NC C 3LD9 200-5CF 1 1 unit 103 0.028


3LD9 284-1B

Rotary operating mechanismsLockable in 0 position with up to three padlocks• For four-hole mounting


• For center-hole mounting1) - Black A 3LD9 284-1D 1 1 unit 103 0.155- Red/Yellow A 3LD9 284-3D 1 1 unit 103 0.155

Mounting tools For center-hole mounting with nut A 3LD9 256-0A 1 5 units 103 0.027

Switching shafts 6 x 6 mm• Length 300 mm C 3LD9 205-0C 1 5 units 103 0.476• Length 600 mm C 3LD9 205-2C 1 5 units 103 0.476

3LD9 286-1A

Inscription labels• With English/German inscription

(MAIN SWITCH/HAUPTSCHALTER)A 3LD9 286-1A 1 10 units 103 0.005


3LD9 251-2A

3LD9 251-0A


• 1-pole A 3LD9 251-2A 100 4 units 103 0.100

• 3-pole A 3LD9 251-0A 1 4 units 103 0.009


© Siemens AG 2009

3KA, 3KE, 3LD Switch Disconnectors3LD Main and EMERGENCY-STOP switches up to 125 A

Accessories


17




For front mounting

3LD9 280-0B


3LD9 280-2B


3LD9 200-5B


• 1 NO + 1 NC } 3LD9 200-5B 1 1 unit 103 0.046

For mounting on the left and/or right, delayed switch-on, leading switch-off, with gold-plate contacts for SIMATIC request• 1 NO + 1 NC C 3LD9 200-5BF 1 1 unit 103 0.028


3LD9 280-0C


3LD9 280-2C


3LD9 200-5C


• 1 NO + 1 NC } 3LD9 200-5C 1 1 unit 103 0.046

For mounting on the left and/or right, delayed switch-on, leading switch-off, with gold-plate contacts for SIMATIC request• 1 NO + 1 NC C 3LD9 200-5CF 1 1 unit 103 0.028


3LD9 284-1B

Rotary operating mechanisms for four-hole mountingLockable in 0 position with up to three padlocks

• Black A 3LD9 284-1B 1 1 unit 103 0.154

• Red/Yellow A 3LD9 284-3B 1 1 unit 103 0.152




3LD9 286-1A

Inscription labels

• With English/German inscription (MAIN SWITCH/HAUPTSCHALTER)

A 3LD9 286-1A 1 10 units 103 0.005


3LD9 281-2A


• 1-pole (1 pack = 4 units) A 3LD9 281-2A 1 4 units 103 0.007


© Siemens AG 2009

3KA, 3KE, 3LD Switch Disconnectors

Notes

17/26 Siemens LV 1 N Main and EMERGENCY-STOP Switches · 12/2008

17


© Siemens AG 2009

Appendix

Conditions of sale and deliveryExport regulations

17/29

■ Terms and Conditions of Sale and Delivery

By using this catalog you can acquire hardware and software products described therein from Siemens AG subject to the fol-lowing terms. Please note! The scope, the quality and the condi-tions for supplies and services, including software products, by any Siemens entity having a registered office outside of Ger-many, shall be subject exclusively to the General Terms and Conditions of the respective Siemens entity. The following terms apply exclusively for orders placed with Siemens AG.

For customers with a seat or registered office in GermanyThe “General Terms of Payment” as well as the “General Condi-tions for the Supply of Products and Services of the Electrical and Electronics Industry” shall apply.For software products, the “General License Conditions for Soft-ware Products for Automation and Drives for Customers with a Seat or registered Office in Germany” shall apply.

For customers with a seat or registered office outside of GermanyThe “General Terms of Payment” as well as the “General Condi-tions for Supplies of Siemens, Automation and Drives for Cus-tomers with a Seat or registered Office outside of Germany” shall apply.For software products, the “General License Conditions for Soft-ware Products for Automation and Drives for Customers with a Seat or registered Office outside of Germany” shall apply.

GeneralThe dimensions are in mm. In Germany, according to the Ger-man law on units in measuring technology, data in inches only apply to devices for export. Illustrations are not binding.Insofar as there are no remarks on the corresponding pages, - especially with regard to data, dimensions and weights given - these are subject to change without prior notice.The prices are in € (Euro) ex works, exclusive packaging.The sales tax (value added tax) is not included in the prices. It shall be debited separately at the respective rate according to the applicable legal regulations.Prices are subject to change without prior notice. We will debit the prices valid at the time of delivery.Surcharges will be added to the prices of products that contain silver, copper, aluminum, lead and/or gold if the respective basic official prices for these metals are exceeded. These surcharges will be determined based on the official price and the metal fac-tor of the respective product.The surcharge will be calculated on the basis of the official price on the day prior to receipt of the order or prior to the release order.The metal factor determines the official price as of which the metal surcharges are charged and the calculation method used. The metal factor, provided it is relevant, is included with the price information of the respective products.

An exact explanation of the metal factor and the text of the Comprehensive Terms and Conditions of Sale and Delivery are available free of charge from your local Siemens business office under the following Order Nos.:• 6ZB5310-0KR30-0BA1

(for customers based in Germany)• 6ZB5310-0KS53-0BA1

(for customers based outside Germany)or download them from the Internethttp://www.siemens.com/automation/mall (Germany: A&D Mall Online-Help System)

■ Export regulations

The products listed in this catalog / price list may be subject to European / German and/or US export regulations.Therefore, any export requiring a license is subject to approval by the competent authorities.According to current provisions, the following export regulations must be observed with respect to the products featured in this catalog / price list:

Even without a label or with an “AL: N” or “ECCN: N”, authoriza-tion may be required due to the final destination and purpose for which the goods are to be used. The deciding factors are the AL or ECCN export authorization indicated on order confirmations, delivery notes and invoices.Errors excepted and subject to change without prior notice.

A&D/VuL_ohne MZ/En 05.09.06

AL Number of the German Export ListProducts marked other than “N” require an export license. In the case of software products, the export des-ignations of the relevant data medium must also be generally adhered to.Goods labeled with an “AL“ not equal to “N” are subject to a European or German export authori-zation when being exported out of the EU.

ECCN Export Control Classification NumberProducts marked other than “N” are subject to a reexport license to specific countries.In the case of software products, the exportdesignations of the relevant data medium must also be generally adhered to.Goods labeled with an “ECCN“ not equal to “N” are subject to a US re-export authorization.


© Siemens AG 2009

The information provided in this catalog contains descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifications are subject to change without notice.

All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.

www.siemens.com/automation

Subject to change without prior noticePDF only: (Order No. E86060-K1002-A281-A1-7600)3P.8103.50.26KG 0109 36 En© Siemens AG 2009

Siemens AGIndustry SectorLow-Voltage Controls and DistributionPostfach 48 4890026 NÜRNBERGGERMANY

Get more information

Low-Voltage Controls and Distribution:www.siemens.com/lowvoltage

lv1n_200812_3LD_umschlag_en.indd2 2lv1n_200812_3LD_umschlag_en.indd2 2 23.01.2009 15:13:3223.01.2009 15:13:32


main and emergency-stop switches up to 250 a … main and emergency-stop switches up to 250 a ......

Documents