Maintenance Guide for your Wahl Adjustable Clipper

A few moments care daily, regular oiling and cleaning,

and proper adjustment will keep your clipper

performing well.

For service or questions about your clipper contact: Wahl Clipper Corporation3001 N. Locust Street Sterling, IL 61081Attention: Repair Departmentemail: wahlproservice@wahlclipper.com

PROBLEM SOLUTION

Clipper doesn’t start Check to see it is plugged in.Power cord is frayed, cracked or pulled away - have it replaced.

Motor runs, but bladedoesn’t move

Clipper head is dirty - clean head.Clipper is very hot - cool, oil and adjust power adjustment screw until blade moves freely.Blade has bent or broken teeth - replace blades.

Clipper makes unusualnoise or vibration

Adjust power adjustment screw.

Clipper pulls hair Blades are dull - replace blades.

Blade sticks Clipper is hot - adjust power adjustment screw and oil.Head is dirty - clean and oil.Blades are rusty or have bent tooth - replace blades.

Blade nicks or cuts Blades are out of alignment - realign. Be sure movable blade does not protrude beyond stationary blade

*If clipper is defective, send to Wahl Clipper Co. for service3001 Locust Street, Sterling, IL 61081

TROUBLE SHOOTING

WAHL PROFESSIONAL APPFor Iphone, Ipad & Android devices.

PROUDLY MADE IN THE U.S.A.