Maintenance of diesel particular filterAccessibility on Eurocargo, Stralis and Trakker EURO VI

Peter Klaus

Unterschleißheim, Deutschland

Contains confidential proprietary and trade secrets information of CNH Industrial. Any use of this work without express written consent is strictly prohibited.

11-11-2013

Wartung des Diesel Partikel Filter (DPF)08-11-13 2

General

� Especially in trucks with a fixed mounted body, the accessibility must be

considered to the cover maintenance of the catalyst.

� Depending on the type of vehicle, the maintenance of the DPF must be

between 300.000 km and 450.000 km.

� The upper heat protection is only on tractor as standard installed.

� Mounting points

Heat protection Service cover

8 x M8

hexagon head bolt

V-clamp

(only importand

for Iveco service)

18 Nm

45 Nm

15 Nm

Wartung des Diesel Partikel Filter (DPF)08-11-13 3

Accessibility of DPFAusbau der Serviceabdeckung und ggf. des Hitzeschildes

70 mm

� The distance between the body and the upper edge of the catalyst should be

min. 70mm, so it is possible to remove the four M8 screws on the top of the

cover by the help of a socket wrench

� Is the body due to the System lower designet than 70 mm, than is a

maintenance cover in the body floor necessary to have the reqired space to the

cover screews. The cover him self can be dismounted laterrally.

Wartung des Diesel Partikel Filter (DPF)08-11-13

4

Ausbau der Serviceabdeckung und ggf. des Hitzeschildes

5 mm

min.

70 mmTop edge -

silencer

Top edge -

chassis frame

Accessibility of DPF

Wartung des Diesel Partikel Filter (DPF)08-11-13 5

Temperature on catalyst- with out upper head protection

Please expects these

temperatures on the catalyst,

especially on body's with less

than 70mm between catalyst

and body floor to prevent

damage's on body or painting.

Depending on the construction,

it may be necessary tor retrofit

the heat protection

Wartung des Diesel Partikel Filter (DPF)08-11-13 6

Temperature on catalyst- with upper head protection