maintenance solutions · 2020. 4. 10. · cure time (fixture/full strength)* 20 min./24 hr. 10...
TRANSCRIPT
-
Maintenance Solutions
-
Industry Maintenance
Guides
Maintain. Repair. Rebuild. Protect.
VALUE FOR YOU Henkel offers more than a product portfolio. We are a partner who understands
your industry and helps solve your toughest challenges.
On-site expert consulting and
application support
Global network of technicians and engineers
On-site Maintenance
Workshops and tailored training
programs
Global MRO Training and Application
Centers
Global distributor and Certified
Applicator network
Proven and documented
OEM and MRO expertise
Wide selection of information and
how-to guides for operators
Online access to resources and technical data
On-SiteConsulting
Plant surveys analyze your current maintenance practices and culture, and recommend improvements. Product analysis can help reduce the complexity of your maintenance product inventory.
Our in-depth programs offer solutions for rebuilding and maintaining key industrial devices such as pumps, shafts, gearboxes, and centrifuges.
Our experts will show you how to identify and apply the proper surface-protection coatings to keep your assets up and running. We can also recommend Henkel Certified Applicators who specialize in these repairs.
On-site customized training will help your staff improve equipment reliability, reduce routine and redundant maintenance tasks, save energy costs, and increase productivity.
Maintenance Workshops
Protective Coating Solutions
Henkel. Solutions for All YourMaintenance Challenges
2 | Maintenance Solutions
-
NEW PRODUCTS 24
PROTECTION THROUGHOUT YOUR FACILITY 26
SOLUTIONS TO COMMON MAINTENANCE CHALLENGES 28
PRODUCT ORDERING INFORMATION 30
PROPERTIES CHART 31
4
6
8
10
12
14
16
18
20
22
TABLE OF CONTENTS
THREADLOCkING Prevent fastener loosening and seizure
THREAD SEALING Prevent leaks – air, hydraulic pipe joints
GASkETING Prevent flange leaks – oil, transmission, coolant
RETAININGPrevent backlash – keyway wallow, spun bearings, shaft misalignment, wear, corrosion
INSTANT BONDING Bond dissimilar parts quickly and easily
METAL AND CONCRETE REPAIRRepair and rebuild metal and concrete surface
PROTECTIvE COATINGS AND COMPOUNDSProtection against corrosion and wear of surfaces
ANTI-SEIzE LUBRICANTS Prevent rust, corrosion, galling or seizing on metal parts in extreme environments
CLEANING Clean and degrease parts and work surfaces
ADDITIONAL PRODUCTSProducts for other key applications
-
THreadlockingLocking of threaded fasteners
» PREvENTS LOOSENiNg FROM ShOCk ANd viBRATiON » SiNgLE COMPONENT – CLEAN ANd EASY TO APPLY » CAN BE uSEd ON vARiOuS SizES OF FASTENERS – REduCES iNvENTORY COSTS » FiLLS gAP BETwEEN ThREAdS ANd uNiTizES ThE ASSEMBLY » STOPS RuST ANd CORROSiON
are THe parTs already assembled?
Helpful Hints:• Clean parts with LOCTITE® SF 7070 ODC-Free Cleaner and Degreaser before applying the adhesive.• If the threadlocker will be applied below 5°C, pre-treat with LOCTITE® 7649 Primer N.• If the parts were in contact with aqueous washing solutions or cutting fluids that leave a protective layer on the
surface, wash with hot water before use.
yes no
Wicking – green What strength do you require?
low – purple medium - blue High – red permanent - red
oil tolerant
Henkel solUTions locTiTe® 290 locTiTe® 222 locTiTe® 243 locTiTe® 263 locTiTe® 277
Fastener Size 1/16“ to 1/2" (M2 to M12) up to 1/4" (up to M6) 1/4“ to 3/4“ (M6 to M20) up to 1“ For large bolts > 7/8“ (>20mm)
Strength high Low Medium high Permanent
Cure Time (Fixture/Full Strength)* 20 min./24 hr. 10 min./24 hr. 10 min./24 hr. 10 min./24 hr. 60 min./24 hr.
Breakaway/Prevail Torque (N.m) 10/29 6/3 20/7 32/32 31/31
Temperature Resistance for Continuous Service 150°C 150°C 180°C 180°C 150°C
Package Size & IDH50 ml bottle - 531724
250 ml bottle - 84806950 ml bottle - 848063250 ml bottle - 848062
10 ml bottle - 142741850 ml bottle - 1367282250 ml bottle - 5317071 litre bottle - 833788
50 ml bottle - 1367281250 ml bottle - 1511183
50 ml bottle - 531723250 ml bottle - 531722
Recommended for locking pre-assembled fasteners, i.e. instrumentation screws, electrical connectors, and set screws. Also seals porosities in welds and metal parts.
Recommended for low strength threadlocking of adjustment screws, countersunk head screws, and set screws; on collars, pulleys, tool holders, and controllers. Also for low strength metals such as aluminum or brass.
with improved oil tolerance, LOCTiTE® 243 Threadlocker is effective on all types of metal threaded fasteners. Prevents loosening on vibrating parts such as pump, motor mounting bolts, gear boxes, or presses. Removable with hand tools.
Engineered to cure consistently on a variety of metals, despite minor surface contaminants. works on steel, stainless steel and most plated fasteners. Tolerates thread lubrication, anti-corrosion and protection fluids. heat required for removal.
high strength adhesive for locking and sealing large bolts and studs 1“ (25 mm) or larger in diameter. heat may be required to weaken bond before parts can be disassembled.
* Typical value @ 22°C
locT
iTe®
pr
imer
s
Use locTiTe® primer to:1. Activate inactive surfaces.2. Speed cure times for faster
return to service.3. Speed curing through larger
gaps and deep threads.4. Substantially speed cure
times on cold parts.5. Act as a cleaning agent.
Name Color viscosity Base On-Part Life dry Time Package Size & idhprimer is optional with:Active surfaces: Brass, copper, bronze, iron, soft steel, nickel.
primer is required with:inactive surfaces: Aluminum, stainless steel, magnesium, zinc, black oxide, cadmium, titanium, and others.
7649 primer n Clear/green 2 Acetone 30 days 30 to 70 seconds
100 ml - 849297
7471 primer T Amber 2 Acetone/isopropanol
7 days 30 to 70 seconds
100 ml - 849296
addiTional prodUcTs
NameStrength/
ColorBreakaway/Prevail
Torque (N.m)Features
locTiTe® 220 Low - Blue 9/19
Removable grade, wicking, for small
threads of 1/4“ (M6) or smaller
locTiTe® 270 high - Red 26/36 Fasteners up to 3/4" (M20)
locTiTe® 271 high - Red 28/31 Fasteners up to 1" (up to M25)
locTiTe® 272 high - Orange 22/24high Temp up to
11/2" (M36)
4 | Maintenance Solutions
-
are THe parTs already assembled?
Helpful Hints:• Clean parts with LOCTITE® SF 7070 ODC-Free Cleaner and Degreaser before applying the adhesive.• If the threadlocker will be applied below 5°C, pre-treat with LOCTITE® 7649 Primer N.• If the parts were in contact with aqueous washing solutions or cutting fluids that leave a protective layer on the
surface, wash with hot water before use.
yes no
Wicking – green What strength do you require?
low – purple medium - blue High – red permanent - red
oil tolerant
Henkel solUTions locTiTe® 290 locTiTe® 222 locTiTe® 243 locTiTe® 263 locTiTe® 277
Fastener Size 1/16“ to 1/2" (M2 to M12) up to 1/4" (up to M6) 1/4“ to 3/4“ (M6 to M20) up to 1“ For large bolts > 7/8“ (>20mm)
Strength high Low Medium high Permanent
Cure Time (Fixture/Full Strength)* 20 min./24 hr. 10 min./24 hr. 10 min./24 hr. 10 min./24 hr. 60 min./24 hr.
Breakaway/Prevail Torque (N.m) 10/29 6/3 20/7 32/32 31/31
Temperature Resistance for Continuous Service 150°C 150°C 180°C 180°C 150°C
Package Size & IDH50 ml bottle - 531724
250 ml bottle - 84806950 ml bottle - 848063250 ml bottle - 848062
10 ml bottle - 142741850 ml bottle - 1367282250 ml bottle - 5317071 litre bottle - 833788
50 ml bottle - 1367281250 ml bottle - 1511183
50 ml bottle - 531723250 ml bottle - 531722
Recommended for locking pre-assembled fasteners, i.e. instrumentation screws, electrical connectors, and set screws. Also seals porosities in welds and metal parts.
Recommended for low strength threadlocking of adjustment screws, countersunk head screws, and set screws; on collars, pulleys, tool holders, and controllers. Also for low strength metals such as aluminum or brass.
with improved oil tolerance, LOCTiTE® 243 Threadlocker is effective on all types of metal threaded fasteners. Prevents loosening on vibrating parts such as pump, motor mounting bolts, gear boxes, or presses. Removable with hand tools.
Engineered to cure consistently on a variety of metals, despite minor surface contaminants. works on steel, stainless steel and most plated fasteners. Tolerates thread lubrication, anti-corrosion and protection fluids. heat required for removal.
high strength adhesive for locking and sealing large bolts and studs 1“ (25 mm) or larger in diameter. heat may be required to weaken bond before parts can be disassembled.
locT
iTe®
pr
imer
s
Use locTiTe® primer to:1. Activate inactive surfaces.2. Speed cure times for faster
return to service.3. Speed curing through larger
gaps and deep threads.4. Substantially speed cure
times on cold parts.5. Act as a cleaning agent.
Name Color viscosity Base On-Part Life dry Time Package Size & idhprimer is optional with:Active surfaces: Brass, copper, bronze, iron, soft steel, nickel.
primer is required with:inactive surfaces: Aluminum, stainless steel, magnesium, zinc, black oxide, cadmium, titanium, and others.
7649 primer n Clear/green 2 Acetone 30 days 30 to 70 seconds
100 ml - 849297
7471 primer T Amber 2 Acetone/isopropanol
7 days 30 to 70 seconds
100 ml - 849296
Maintenance Solutions | 5
-
THread sealing
» LiquidS ENSuRE COMPLETE CONTACT BETwEEN ThREAdS FOR A 100% SEAL » LiquidS wiLL NOT CREEP, ShRiNk, ShREd OR BLOCk SYSTEMS (iNCLudiNg FiLTERS) » diSASSEMBLY CAN BE AChiEvEd EASiLY wiTh BASiC hANd TOOLS » REPLACES TAPES ANd PASTES
are THe parTs meTal or plasTic?
Helpful Hints:• If the sealant (LOCTITE® 545 Thread Sealant, LOCTITE® 565 Thread Sealant, LOCTITE® 567 Thread Sealant, or
LOCTITE® 561 Pipe Sealant) will be applied below 5°C, pre-treat with LOCTITE® 7649 Primer N.• All parts must be clean and dry before sealing - use LOCTITE® SF 7070 ODC-Free Cleaner and Degreaser.
plasTic and/or meTal meTal parTs
are the threads fine or coarse?
cord Fine coarse
Henkel solUTions locTiTe® 55locTiTe® 542
(Hydraulic & pneumatic)locTiTe® 565 locTiTe® 567 locTiTe® 577
Description Cord Brown Liquid white to off white Paste white Paste Yellow Paste
Maximum Thread Size 4" (10.16 cm) up to 3/4" (1.90 cm) up to 2" (5.08 cm) 3“ (7.62 cm) up to 3“ (7.62 cm)
Temperature Resistance 150°C 150°C 150°C 250°C 180°C
Maximum Pressure Resistance (N/mm2)/Cure Time 10,000 psi (68.9)/instant 10,000 psi (68.9)/24 hrs. 10,000 psi (68.9)/72 hrs. 10,000 psi (68.9)/72 hrs. 10,000 psi (68.9)/72 hrs.
Substrate to be Sealed Metal, Plastic or Both Metal Metal Stainless Steel, Aluminum Metal
Instant Low Pressure Seal Yes No Yes Yes No
Package Size & IDH 150 metres - 175244650 ml bottle - 848735
250 ml bottle - 84873650 ml bottle - 1751917
250 ml bottle - 175255250 ml bottle - 2146962250 ml bottle - 2146695
50 ml tottle tube - 2121780250 ml tottle tube - 2121367
Can be safely applied on metal and plastic threaded fittings.Potable water: NSF/ANSi 61 uL Listed and Ceritified to CSA international. **
Recommended for fine threaded fittings as used in hydraulic and pneumatic installations and small fittings in general. Carries german dvgw approval (Ng-5146 AR 0855) Meets BS 6956 type A for sealing gas fittings. **
A general-purpose instant sealant for tapered and straight/tapered fittings.
withstands temperatures to204°C with excellent solventresistance. Locks and seals tapered pipe threads andfittings, including high pressureapplications. disassembles withhand tools.
Medium strength, generalpurpose sealant for use oncoarse, threaded components.
** All approvals are region specific. Please contact your henkel Sales Representative for further information.
addiTional prodUcTs
Name Features
locTiTe® 572 Easy application by hand. Slow curing. For use on construction pipe sealing.
locTiTe® 545 Low strength, fast curing for hydraulic / Pneumatic fittings.
6 | Maintenance Solutions
-
are THe parTs meTal or plasTic?
Helpful Hints:• If the sealant (LOCTITE® 545 Thread Sealant, LOCTITE® 565 Thread Sealant, LOCTITE® 567 Thread Sealant, or
LOCTITE® 561 Pipe Sealant) will be applied below 5°C, pre-treat with LOCTITE® 7649 Primer N.• All parts must be clean and dry before sealing - use LOCTITE® SF 7070 ODC-Free Cleaner and Degreaser.
plasTic and/or meTal meTal parTs
are the threads fine or coarse?
cord Fine coarse
Henkel solUTions locTiTe® 55locTiTe® 542
(Hydraulic & pneumatic)locTiTe® 565 locTiTe® 567 locTiTe® 577
Description Cord Brown Liquid white to off white Paste white Paste Yellow Paste
Maximum Thread Size 4" (10.16 cm) up to 3/4" (1.90 cm) up to 2" (5.08 cm) 3“ (7.62 cm) up to 3“ (7.62 cm)
Temperature Resistance 150°C 150°C 150°C 250°C 180°C
Maximum Pressure Resistance (N/mm2)/Cure Time 10,000 psi (68.9)/instant 10,000 psi (68.9)/24 hrs. 10,000 psi (68.9)/72 hrs. 10,000 psi (68.9)/72 hrs. 10,000 psi (68.9)/72 hrs.
Substrate to be Sealed Metal, Plastic or Both Metal Metal Stainless Steel, Aluminum Metal
Instant Low Pressure Seal Yes No Yes Yes No
Package Size & IDH 150 metres - 175244650 ml bottle - 848735
250 ml bottle - 84873650 ml bottle - 1751917
250 ml bottle - 175255250 ml bottle - 2146962250 ml bottle - 2146695
50 ml tottle tube - 2121780250 ml tottle tube - 2121367
Can be safely applied on metal and plastic threaded fittings.Potable water: NSF/ANSi 61 uL Listed and Ceritified to CSA international. **
Recommended for fine threaded fittings as used in hydraulic and pneumatic installations and small fittings in general. Carries german dvgw approval (Ng-5146 AR 0855) Meets BS 6956 type A for sealing gas fittings. **
A general-purpose instant sealant for tapered and straight/tapered fittings.
withstands temperatures to204°C with excellent solventresistance. Locks and seals tapered pipe threads andfittings, including high pressureapplications. disassembles withhand tools.
Medium strength, generalpurpose sealant for use oncoarse, threaded components.
** All approvals are region specific. Please contact your henkel Sales Representative for further information.
Maintenance Solutions | 7
-
gaskeTingSealing and Flanges
» NO ShiMMiNg EFFECT – CONTROLLEd TOLERANCES, NO NEEd FOR RE-TORquiNg » FiLL ALL vOidS – REduCE ThE NEEd FOR A FiNE SuRFACE FiNiSh OF FLANgES » PARTS CAN BE diSASSEMBLEd EASiLY EvEN AFTER ExTENdEd SERviCE » RESiSTS high PRESSuRE whEN FuLLY CuREd
does THe exisTing gaskeT need To be Used as a sHim?
Helpful Hints:• If there are traces of old gasket left on the parts to be sealed, clean with
LOCTITE® SF 790 Chisel Gasket Remover.• All parts must be clean and dry before sealing – use LOCTITE® SF 7070 ODC-
Free Cleaner and Degreaser.• Anaerobic products cure between metal surfaces with the absence of air.
no
are you sealing a rigid or a stamped flange?
rigid stamped
Henkel solUTions locTiTe® 510 locTiTe® 518 locTiTe® 574 locTiTe® si 587 locTiTe® si 596 locTiTe® si 5900
Color Pink Red Red Blue Red Black
Gasket Type Formed-in-place Formed-in-place Formed-in-place Formed-in-place Formed-in-place Formed-in-place
Gap Fill 0.010" (0.25 mm) 0.010" (0.25 mm) 0.010“ (0.25 mm) 0.250" (6.35 mm) 0.250" (6.35 mm) 0.240" (6 mm)
Cure Method Anaerobic Anaerobic Anaerobic Moisture (RTv) Moisture (RTv) Moisture (RTv)
Fixture/Cure Time N.A./24 hrs. N.A./24 hrs. N.A./24 hrs. 50 min. (Skin formation) 50 min. (Skin formation) 20 min. (Skin formation)
Temperature Resistance(Continuous/Intermittent)
204°C/N.A. 150°C/N.A. 150°C/N.A. 204°C/250°C 316°C 204°C/N.A.
Instant Seal Excellent Excellent Excellent Excellent Excellent Excellent
Water/Glycol Resistance Excellent Excellent Excellent Excellent Excellent Excellent
Package Size & IDH50ml tottle tube - 848390250ml tottle tube - 848731300ml cartridge - 910888
50ml tottle tube - 2118119250ml tottle tube - 2118117250ml cartridge - 2136699
50ml tottle tube - 848739250ml tottle tube - 848734
95g tube - 1266356300ml cartridge - 1246389
300ml cartridge - 317667 300ml cartridge - 1257126
high temperature. Product hasa temperature range to 204°C with excellent solventand chemical resistance. Makesor dresses gaskets in rigidassemblies. Eliminates gasketcompression set.
Recommended for use on rigid iron, steel and aluminum flanges. Spray LOCTiTE® SF 7649 Primer Non only one surface.
Recommended for sealing rigid & semi-rigid metal flanges. Fast curing. gives instant sealing.
All types of flanges includingstamped sheet metal. designedfor superior bonding propertiesto oil contaminated metals.
high temperature siliconesealant makes the repair ofindustrial furnaces, ovens,boilers, exhaust stacks, hightemperature stacks, ductingand heating elements.
Superior flexibility, withstand high relative joint movement. high adhesion, gives instant seal. Low odor, Low volaticity, Non-corrosive.
addiTional prodUcTs
Name Features
locTiTe® 515 gasket eliminator Flange sealant
For flexible applications. Cure speed: unprimed - 1 to 12 hours.Primed - 15 minutes to 2 hours.
locTiTe® 790 chisel gasket remover
Solvent. dry time: Leave on surface for 5 to 10 minutes. wipe/scrape clean.
locTiTe® si 5920designed for high temperature resistance and electrical insulating applications. Temperature resistance upto 360°C.
8 | Maintenance Solutions
-
does THe exisTing gaskeT need To be Used as a sHim?
Helpful Hints:• If there are traces of old gasket left on the parts to be sealed, clean with
LOCTITE® SF 790 Chisel Gasket Remover.• All parts must be clean and dry before sealing – use LOCTITE® SF 7070 ODC-
Free Cleaner and Degreaser.• Anaerobic products cure between metal surfaces with the absence of air.
no
are you sealing a rigid or a stamped flange?
rigid stamped
Henkel solUTions locTiTe® 510 locTiTe® 518 locTiTe® 574 locTiTe® si 587 locTiTe® si 596 locTiTe® si 5900
Color Pink Red Red Blue Red Black
Gasket Type Formed-in-place Formed-in-place Formed-in-place Formed-in-place Formed-in-place Formed-in-place
Gap Fill 0.010" (0.25 mm) 0.010" (0.25 mm) 0.010“ (0.25 mm) 0.250" (6.35 mm) 0.250" (6.35 mm) 0.240" (6 mm)
Cure Method Anaerobic Anaerobic Anaerobic Moisture (RTv) Moisture (RTv) Moisture (RTv)
Fixture/Cure Time N.A./24 hrs. N.A./24 hrs. N.A./24 hrs. 50 min. (Skin formation) 50 min. (Skin formation) 20 min. (Skin formation)
Temperature Resistance(Continuous/Intermittent)
204°C/N.A. 150°C/N.A. 150°C/N.A. 204°C/250°C 316°C 204°C/N.A.
Instant Seal Excellent Excellent Excellent Excellent Excellent Excellent
Water/Glycol Resistance Excellent Excellent Excellent Excellent Excellent Excellent
Package Size & IDH50ml tottle tube - 848390250ml tottle tube - 848731300ml cartridge - 910888
50ml tottle tube - 2118119250ml tottle tube - 2118117250ml cartridge - 2136699
50ml tottle tube - 848739250ml tottle tube - 848734
95g tube - 1266356300ml cartridge - 1246389
300ml cartridge - 317667 300ml cartridge - 1257126
high temperature. Product hasa temperature range to 204°C with excellent solventand chemical resistance. Makesor dresses gaskets in rigidassemblies. Eliminates gasketcompression set.
Recommended for use on rigid iron, steel and aluminum flanges. Spray LOCTiTE® SF 7649 Primer Non only one surface.
Recommended for sealing rigid & semi-rigid metal flanges. Fast curing. gives instant sealing.
All types of flanges includingstamped sheet metal. designedfor superior bonding propertiesto oil contaminated metals.
high temperature siliconesealant makes the repair ofindustrial furnaces, ovens,boilers, exhaust stacks, hightemperature stacks, ductingand heating elements.
Superior flexibility, withstand high relative joint movement. high adhesion, gives instant seal. Low odor, Low volaticity, Non-corrosive.
Maintenance Solutions | 9
-
reTainingSecuring Cylindrical Assemblies
» BONd NON-ThREAdEd CYLiNdRiCAL METAL ASSEMBLiES » high ANd MOdERATE STRENgTh PROduCTS – CAN CARRY high LOAdS ANd ELiMiNATE FRETTiNg » FiLL ALL vOidS – PREvENT CORROSiON » REduCE ThE NEEd FOR CLOSE TOLERANCES » 100% CONTACT – LOAd ANd STRESS ARE diSTRiBuTEd EvENLY OvER ThE jOiNT
is THe assembly badly Worn?
Helpful Hints:• If the retaining compound will be applied below 5°C, pre-treat with LOCTITE® 7649 Primer N.• All parts must be clean and dry before sealing – use LOCTITE® SF 7070 ODC-Free Cleaner and Degreaser.• If the parts have been in contact with washing or cutting fluids containing nitrates, wash with hot water.
yes - gaps Up To 0.020" (0.5 mm) no - gaps To 0.015" (0.25 mm)
do you require low, medium or high strength?
low strength medium strength High strength
High Viscosity low Viscosity
Henkel solUTions locTiTe® 660 locTiTe® 641 locTiTe® 609 locTiTe® 638 locTiTe® 648
Strength Required high Low Medium high high
Shear Strength (N/mm2) 3,335 psi (23) 1,700 psi (11.7) 2,300 psi (15.8) 4,200 psi (29) 4,480 psi (31)
Diametrical Clearance up to 0.020" (0.5 mm) up to 0.006'' (0.15 mm) up to 0.005" (0.1 mm) up to 0.01" (0.25 mm) up to 0.006" (0.15 mm)
Temperature Resistance 150°C 150°C 150°C 180°C 180°C
Cure Time (Setup/Full Strength) 20 min./24 hr. 20 min./24 hr. 10 min./24 hr. 15 min./24 hr. 10 min./24 hr.
Package Size & IDH 50ml bottle - 175241750ml bottle - 848752
250ml bottle - 84875050ml bottle - 848744250ml bottle - 848745
50ml bottle - 1865160250ml bottle - 1865048
50ml bottle - 1865163250ml bottle - 1865164
used for repairing worn coaxial parts without remachining; enables reuse of worn bearing seats, keys, splines, tapers, or for retaining shims.
A controlled strength retaining compound that is ideal for cylindrical parts that requiredisassembly.
Recommended for partsthat will need subsequentdismantling, i.e. retention of bearings onto shafts and into housings.
Maximum strength. For use where high dynamic force or cyclic loading is expected. Offers high temperature performanceand oil tolerance.
Press Fit/high Strength/Rapid Cure. Offers high temperature performance and oil tolerance.
addiTional prodUcTs
Name Features
locTiTe® 680gives best resistance to dynamic, axial and radial loads. Recommended for retaining shafts, gears, pulleys, and similar cylindrical parts.
locTiTe® 620 Particularly suitable for applications where temperature resistance up to 200°C is required. Requires heat cure to achieve temperature resistance.
locTiTe® 603 For close-fitting parts (gap up to 0.1 mm) with light contamination. Typical applications include retaining roller bearings or oil impregnated bushings into housings.
10 | Maintenance Solutions
-
is THe assembly badly Worn?
Helpful Hints:• If the retaining compound will be applied below 5°C, pre-treat with LOCTITE® 7649 Primer N.• All parts must be clean and dry before sealing – use LOCTITE® SF 7070 ODC-Free Cleaner and Degreaser.• If the parts have been in contact with washing or cutting fluids containing nitrates, wash with hot water.
yes - gaps Up To 0.020" (0.5 mm) no - gaps To 0.015" (0.25 mm)
do you require low, medium or high strength?
low strength medium strength High strength
High Viscosity low Viscosity
Henkel solUTions locTiTe® 660 locTiTe® 641 locTiTe® 609 locTiTe® 638 locTiTe® 648
Strength Required high Low Medium high high
Shear Strength (N/mm2) 3,335 psi (23) 1,700 psi (11.7) 2,300 psi (15.8) 4,200 psi (29) 4,480 psi (31)
Diametrical Clearance up to 0.020" (0.5 mm) up to 0.006'' (0.15 mm) up to 0.005" (0.1 mm) up to 0.01" (0.25 mm) up to 0.006" (0.15 mm)
Temperature Resistance 150°C 150°C 150°C 180°C 180°C
Cure Time (Setup/Full Strength) 20 min./24 hr. 20 min./24 hr. 10 min./24 hr. 15 min./24 hr. 10 min./24 hr.
Package Size & IDH 50ml bottle - 175241750ml bottle - 848752
250ml bottle - 84875050ml bottle - 848744250ml bottle - 848745
50ml bottle - 1865160250ml bottle - 1865048
50ml bottle - 1865163250ml bottle - 1865164
used for repairing worn coaxial parts without remachining; enables reuse of worn bearing seats, keys, splines, tapers, or for retaining shims.
A controlled strength retaining compound that is ideal for cylindrical parts that requiredisassembly.
Recommended for partsthat will need subsequentdismantling, i.e. retention of bearings onto shafts and into housings.
Maximum strength. For use where high dynamic force or cyclic loading is expected. Offers high temperature performanceand oil tolerance.
Press Fit/high Strength/Rapid Cure. Offers high temperature performance and oil tolerance.
Maintenance Solutions | 11
-
insTanT bonding » ASSEMBLE PARTS quiCkLY ANd EASiLY » PEPAiR BROkEN PARTS » BONd diSSiMiLAR PARTS
WHaT is THe bonding applicaTion reqUiremenT?
bonding rUbber, plasTic, meTal - insTanT bonding
porous / absorbent material plastics / rubber (epdm)
metal parts general purpose
Henkel solUTions locTiTe® 401 locTiTe® 454 locTiTe® 406 locTiTe® 415 locTiTe® 495
Fixture Time 15 sec. 15 sec. 15 sec. 30 sec. 20 sec.
Gap Fill (mm) 0.12 0.25 0.10 0.20 0.10
Temperature Resistance 120°C 120°C 120°C 80°C 120°C
Shear Strength, psi (N/mm2) 3200 (22) 3200 (22) 3200 (22) 3600 (25) 2750 (19)
viscosity (cP) 110 gel 20 1500 45
Package Size & IDH20g bottle - 1669715 1litre bottle - 833784
20g bottle - 1752383300g cartridge - 88525
20g bottle - 166971320g bottle - 848003
500gm bottle - 84923020g bottle - 1669711
Surface insensitive instant adhesive for difficult-to-bond, porous surfaces such as wood, paper, leather or fabric.
Surface insensitive gel. Bonds porous & absorbent surfaces. Non-dripping, particularly suited for overhead applications.
Particularly suited for bonding rubbers & plastics. A must for every tool box for general maintenance & repair. Makes O-rings instantly. wicking viscosity for tight bond lines.
high viscocity adhesive offering maximum adhesion to metals. ideal for bonding small metal parts for general maintenance.
A general purpose adhesive designed to bond rubber, metal & plastic parts.
addiTional prodUcTs
Name Features gap Fill (mm)
locTiTe® 480 Suitable for close-fitting parts 0.15
locTiTe® 430 Metal bonder for close fitting parts 0.12
locTiTe® 420 wicking type plastic bonder 0.05
12 | Maintenance Solutions
-
WHaT is THe bonding applicaTion reqUiremenT?
bonding rUbber, plasTic, meTal - insTanT bonding
porous / absorbent material plastics / rubber (epdm)
metal parts general purpose
Henkel solUTions locTiTe® 401 locTiTe® 454 locTiTe® 406 locTiTe® 415 locTiTe® 495
Fixture Time 15 sec. 15 sec. 15 sec. 30 sec. 20 sec.
Gap Fill (mm) 0.12 0.25 0.10 0.20 0.10
Temperature Resistance 120°C 120°C 120°C 80°C 120°C
Shear Strength, psi (N/mm2) 3200 (22) 3200 (22) 3200 (22) 3600 (25) 2750 (19)
viscosity (cP) 110 gel 20 1500 45
Package Size & IDH20g bottle - 1669715 1litre bottle - 833784
20g bottle - 1752383300g cartridge - 88525
20g bottle - 166971320g bottle - 848003
500gm bottle - 84923020g bottle - 1669711
Surface insensitive instant adhesive for difficult-to-bond, porous surfaces such as wood, paper, leather or fabric.
Surface insensitive gel. Bonds porous & absorbent surfaces. Non-dripping, particularly suited for overhead applications.
Particularly suited for bonding rubbers & plastics. A must for every tool box for general maintenance & repair. Makes O-rings instantly. wicking viscosity for tight bond lines.
high viscocity adhesive offering maximum adhesion to metals. ideal for bonding small metal parts for general maintenance.
A general purpose adhesive designed to bond rubber, metal & plastic parts.
Maintenance Solutions | 13
-
meTal and concreTe repair
» high COMPRESSivE STRENgTh » METALS CAN BE MAChiNEd, dRiLLEd OR TAPPEd AFTER CuRE » ExCELLENT RESiSTANCE TO AggRESSivE ChEMiCALS
WHaT maTerial are yoU repairing or rebUilding?
sTeel alUminiUm concreTe meTal
kneadableHigh compressive
strengthputty Fast cure putty
High temperature resistance
reliable and long lasting concrete repairs Wear resistance
Henkel solUTions locTiTe® ea 3463
metal magic steelTm stick
locTiTe® ea 3478superior metal
locTiTe® ea 3471steel putty
locTiTe® pc 3473Fast steel putty
locTiTe® ea 3479metal set HTa
locTiTe® pc 9410magna crete
locTiTe® pc 9416Floor Fill
locTiTe® pc 7222Wear resistant putty
Description 2k-Epoxy 2k-Epoxy 2k-Epoxy 2k-Epoxy 2k-Epoxy2k Magnesium Phosphate
System3k-Epoxy 2k-Epoxy
Mix ratio by volume/weight N/A 4:1 / 7.25:1 2.5:1 / 6.25:1 1:1 / 100:56.5 1:1 / 1:1 Refer to TdS 4.6:1:9.8 / 16:3.2:80.8 2:1 / 2:1
Working life 2.5 - 5 min. 20 min. 30 min. 3 min. 40 min. 5 to 20 min. 40 to 60 min. 30 min.
Fixture time / Cure time 10 min. 6 h 6 h 10 min. 12 h 1-2 h 24 h 6 h
Shear strength (GBMS) ≥ 3.45 N/mm² 17 N/mm2 9.6 N/mm2 15 N/mm2 20 N/mm2 - - 16.8 N/mm2
Compressive strength 83 N/mm2 125 N/mm2 61.7 N/mm2 51 N/mm2 90 N/mm2 90 N/mm² 90 N/mm² 72 N/mm2
Service temperature range (Dry) -30ºC to +120ºC -29ºC to +120ºC -30ºC to +105ºC -30ºC to +95ºC -20ºC to +190ºC -50ºC to +1,100ºC -30ºC to +110ºC -30ºC to +105ºC
Coverage @ 6mm thickness* 45cm2 232cm2 278cm2 370cm2 - 52m2 532in3 342cm2
Package Size & IDH 4 oz - 1752399 1kg - 6800351 lb - 17524061 lb - 1752434
500g can - 680036 500g - 1752395 5 gal - 2355735kg - 680838
20kg - 1400736500g - 679971
*As mentioned in product technical data sheet
• Emergency sealing of leaks in pipes and tanks
• Smoothes welds• Repairs small cracks in
castings
Sets in 10 minutes. Steel filled kneadable stick. Adheres to damp surfaces and cures under water. Chemical and corrosion resistant. Can be drilled, filed and painted.ansi/nsF standard 61**
• Rebuilding keyways and spline assemblies
• Rebuilding of bearings, clamp connections, tensioning elements, gear wheels or bearing seats
Ferro-silicon filled with outstanding compression strength. ideal for renewing surfaces subjected to compression, thrust, impact and harsh environments.
• Seal cracks in tanks, castings, vessels and valves
• Patch non-structural defects in steel casings
• Resurface worn air seals
• Repair pitting caused by cavitation and/or corrosion
general-purpose steelfilled, non-sagging 2kEpoxy. used to rebuild worn metal parts.
• Repair holes in tanks, leaks in pipes and elbows
• Renew stripped threads• Rebuild worn steel
parts
Fast curing, steel filled, non-sagging. ideal for emergency repair and repairing worn metal parts to prevent downtime.
• Rebuilding and repairing worn metal parts in high operating temperature applications
A non-sagging, heavily reinforced, aluminium powder filled 2k-Epoxy. Easily mixed and moulded to form odd shapes if required. Cures to a nonrusting, aluminium-like finish.
• Repair / rebuild of ramps and loading areas, support beam and footer repairs, bridge decking and supports, concrete bunds and walls etc.
Two-component, rapid setting concrete repair and grouting system designed for making reliable, long lasting repairs. Bonds to concrete, wood, glass, steel and construction materials. Can be mixed and applied from -25°C to 45°C.
• Three component chemically resistant product
• Bonds to almost any clean substrate
• Self-leveling• Very high compressive
strength• Can withstand impact
load
A non-shrinking 100% solids epoxy based system for repairing holes in floors, spalled areas, ramps, stairs, cracks in floors and for use in grouting applications.
• Ideal for filling pits and other irregularities in metal surfaces
• Used in pipes, pumps elbows, transitions, butterfly valves, deflection plates, turbine blades and tanks
Contains ceramic fibers, giving this trowelable putty excellent wear and abrasion resistance with a smooth, low friction finish. used in applications with an operating range of -30°C to 105°C.
** All approvals are region specific. Please contact your henkel Sales Representative for further information.
14 | Maintenance Solutions
-
WHaT maTerial are yoU repairing or rebUilding?
sTeel alUminiUm concreTe meTal
kneadableHigh compressive
strengthputty Fast cure putty
High temperature resistance
reliable and long lasting concrete repairs Wear resistance
Henkel solUTions locTiTe® ea 3463
metal magic steelTm stick
locTiTe® ea 3478superior metal
locTiTe® ea 3471steel putty
locTiTe® pc 3473Fast steel putty
locTiTe® ea 3479metal set HTa
locTiTe® pc 9410magna crete
locTiTe® pc 9416Floor Fill
locTiTe® pc 7222Wear resistant putty
Description 2k-Epoxy 2k-Epoxy 2k-Epoxy 2k-Epoxy 2k-Epoxy2k Magnesium Phosphate
System3k-Epoxy 2k-Epoxy
Mix ratio by volume/weight N/A 4:1 / 7.25:1 2.5:1 / 6.25:1 1:1 / 100:56.5 1:1 / 1:1 Refer to TdS 4.6:1:9.8 / 16:3.2:80.8 2:1 / 2:1
Working life 2.5 - 5 min. 20 min. 30 min. 3 min. 40 min. 5 to 20 min. 40 to 60 min. 30 min.
Fixture time / Cure time 10 min. 6 h 6 h 10 min. 12 h 1-2 h 24 h 6 h
Shear strength (GBMS) ≥ 3.45 N/mm² 17 N/mm2 9.6 N/mm2 15 N/mm2 20 N/mm2 - - 16.8 N/mm2
Compressive strength 83 N/mm2 125 N/mm2 61.7 N/mm2 51 N/mm2 90 N/mm2 90 N/mm² 90 N/mm² 72 N/mm2
Service temperature range (Dry) -30ºC to +120ºC -29ºC to +120ºC -30ºC to +105ºC -30ºC to +95ºC -20ºC to +190ºC -50ºC to +1,100ºC -30ºC to +110ºC -30ºC to +105ºC
Coverage @ 6mm thickness* 45cm2 232cm2 278cm2 370cm2 - 52m2 532in3 342cm2
Package Size & IDH 4 oz - 1752399 1kg - 6800351 lb - 17524061 lb - 1752434
500g can - 680036 500g - 1752395 5 gal - 2355735kg - 680838
20kg - 1400736500g - 679971
*As mentioned in product technical data sheet
• Emergency sealing of leaks in pipes and tanks
• Smoothes welds• Repairs small cracks in
castings
Sets in 10 minutes. Steel filled kneadable stick. Adheres to damp surfaces and cures under water. Chemical and corrosion resistant. Can be drilled, filed and painted.ansi/nsF standard 61**
• Rebuilding keyways and spline assemblies
• Rebuilding of bearings, clamp connections, tensioning elements, gear wheels or bearing seats
Ferro-silicon filled with outstanding compression strength. ideal for renewing surfaces subjected to compression, thrust, impact and harsh environments.
• Seal cracks in tanks, castings, vessels and valves
• Patch non-structural defects in steel casings
• Resurface worn air seals
• Repair pitting caused by cavitation and/or corrosion
general-purpose steelfilled, non-sagging 2kEpoxy. used to rebuild worn metal parts.
• Repair holes in tanks, leaks in pipes and elbows
• Renew stripped threads• Rebuild worn steel
parts
Fast curing, steel filled, non-sagging. ideal for emergency repair and repairing worn metal parts to prevent downtime.
• Rebuilding and repairing worn metal parts in high operating temperature applications
A non-sagging, heavily reinforced, aluminium powder filled 2k-Epoxy. Easily mixed and moulded to form odd shapes if required. Cures to a nonrusting, aluminium-like finish.
• Repair / rebuild of ramps and loading areas, support beam and footer repairs, bridge decking and supports, concrete bunds and walls etc.
Two-component, rapid setting concrete repair and grouting system designed for making reliable, long lasting repairs. Bonds to concrete, wood, glass, steel and construction materials. Can be mixed and applied from -25°C to 45°C.
• Three component chemically resistant product
• Bonds to almost any clean substrate
• Self-leveling• Very high compressive
strength• Can withstand impact
load
A non-shrinking 100% solids epoxy based system for repairing holes in floors, spalled areas, ramps, stairs, cracks in floors and for use in grouting applications.
• Ideal for filling pits and other irregularities in metal surfaces
• Used in pipes, pumps elbows, transitions, butterfly valves, deflection plates, turbine blades and tanks
Contains ceramic fibers, giving this trowelable putty excellent wear and abrasion resistance with a smooth, low friction finish. used in applications with an operating range of -30°C to 105°C.
** All approvals are region specific. Please contact your henkel Sales Representative for further information.
Maintenance Solutions | 15
-
proTecTiVe coaTings and compoUnds » PROvidES SuPERiOR PROTECTiON FROM ENviRONMENTAL iMPACT » ELiMiNATES ANd BREAkS CORROSiON / EROSiON CYCLE » high COMPRESSivE STRENgTh » BROAd RANgE TAiLOREd TO SPECiFiC APPLiCATiONS
WHaT Type oF coaTing do yoU reqUire?
Wear resisTanT corrosion resisTanT
impact resistance shallow Wear deep Wear
Henkel solUTions locTiTe® mr Flex 80™ putty
pourable repair compound
locTiTe® pc 7333brushable ceramic
locTiTe® pc 7218Wearing compound
locTiTe® pc 7226pneu Wear
locTiTe® pc 7320Flexible structural coating
locTiTe® pc 7319chemical resistant coating
Colour Black dark grey grey grey grey, Blue, green grey, Blue, green
Service temperature range (dry) -29ºC to +82ºC -29ºC to +120ºC -30ºC to +120ºC -30ºC to +120ºC + 5ºC to +90ºC -30ºC to +120ºC
Mix ratio by volume (A:B) 2.5:1 2.75:1 2:1 4:1 1:1 2.3:1
Mix ratio by weight (A:B) 2.6:1 4.8:1 2:1 4:1 1:1 3.4:1
Working time 10 min. 30 min. 30 min. 30 min. 50 min. 30 min.
Cure time 8 h 6 h 7 h 6 h 4 h 16 h
Recommended total layer thickness NA min. 0.5 mm min. 6 mm min. 6 mm min. 0.5 mm min. 0.5 mm
Package Size & IDH 1lb - 1752404 1kg - 6800382kg - 680839
10kg - 14020222kg - 175194010kg - 1751941
20kg - 2084171
5kg - 885175 grey 20kg - 1073830green 20kg - 1678823Blue 20kg - 1678824
it is ideal for repairing metal, rubber, and urethane surfaces that are subject to wear and impact. Typical applicationsinclude pump liners, pulleys, conveyor belts, rubber andurethane parts or sheeting, and couplings.
Brushable ceramic filled two-part epoxy for• Impellers, butterfly valves• Pump housings• Cyclones• Lining tanks
Two-part ceramic filled epoxy for• Cyclone and separator
bodies• Dust collectors and
exhausters• Pump liners and impellers• Fan blades and housings• Chutes and hoppers• Elbows and transition points
Ceramic filled two-part epoxy for• Dredge pump liners• Flumes and troughs• Pump impellers• Vibrating feeders• Chutes/hoppers
Solvent free flexible epoxy coating for• Pipes• Trenches• Tanks• Concrete structure• Metal structure• Equipment foundation
Forms glossy, low friction surface that protects equipment against extreme corrosion caused by chemical exposure.
addiTional prodUcTs
Name Features
locTiTe® pc 235597 Ultra High Temperature pneu Wear
Recommended for any application that requires protection from fine particle abrasion under dry service temperatures of upto 288°C.
locTiTe® pc 7234 High Temperature brushable ceramic
A ceramic reinforced epoxy that provides high gloss, low friction coating designed to protect against turbulence and abrasion under dry service temperatures of up to 288°C.
locTiTe® pc 9340 High Temperature chemical resistant coating
To protect equipment against extreme corrosion caused by chemical exposure under dry service temperatures of upto 210°C.
16 | Maintenance Solutions
-
WHaT Type oF coaTing do yoU reqUire?
Wear resisTanT corrosion resisTanT
impact resistance shallow Wear deep Wear
Henkel solUTions locTiTe® mr Flex 80™ putty
pourable repair compound
locTiTe® pc 7333brushable ceramic
locTiTe® pc 7218Wearing compound
locTiTe® pc 7226pneu Wear
locTiTe® pc 7320Flexible structural coating
locTiTe® pc 7319chemical resistant coating
Colour Black dark grey grey grey grey, Blue, green grey, Blue, green
Service temperature range (dry) -29ºC to +82ºC -29ºC to +120ºC -30ºC to +120ºC -30ºC to +120ºC + 5ºC to +90ºC -30ºC to +120ºC
Mix ratio by volume (A:B) 2.5:1 2.75:1 2:1 4:1 1:1 2.3:1
Mix ratio by weight (A:B) 2.6:1 4.8:1 2:1 4:1 1:1 3.4:1
Working time 10 min. 30 min. 30 min. 30 min. 50 min. 30 min.
Cure time 8 h 6 h 7 h 6 h 4 h 16 h
Recommended total layer thickness NA min. 0.5 mm min. 6 mm min. 6 mm min. 0.5 mm min. 0.5 mm
Package Size & IDH 1lb - 1752404 1kg - 6800382kg - 680839
10kg - 14020222kg - 175194010kg - 1751941
20kg - 2084171
5kg - 885175 grey 20kg - 1073830green 20kg - 1678823Blue 20kg - 1678824
it is ideal for repairing metal, rubber, and urethane surfaces that are subject to wear and impact. Typical applicationsinclude pump liners, pulleys, conveyor belts, rubber andurethane parts or sheeting, and couplings.
Brushable ceramic filled two-part epoxy for• Impellers, butterfly valves• Pump housings• Cyclones• Lining tanks
Two-part ceramic filled epoxy for• Cyclone and separator
bodies• Dust collectors and
exhausters• Pump liners and impellers• Fan blades and housings• Chutes and hoppers• Elbows and transition points
Ceramic filled two-part epoxy for• Dredge pump liners• Flumes and troughs• Pump impellers• Vibrating feeders• Chutes/hoppers
Solvent free flexible epoxy coating for• Pipes• Trenches• Tanks• Concrete structure• Metal structure• Equipment foundation
Forms glossy, low friction surface that protects equipment against extreme corrosion caused by chemical exposure.
Maintenance Solutions | 17
-
anTi-seize lUbricanTs
» PROTECT AgAiNST RuST, CORROSiON, SEiziNg ANd gALLiNg » PROvidE LuBRiCATiON iN ExTREME ENviRONMENTS
WHaT Type oF anTi-seize do yoU reqUire?
general pUrpose meTal-Free applicaTionincidenTal
Food conTacTWaTer
resisTanT
Up to 871°c Up to 982°c Up to 1315°c
Henkel solUTions locTiTe® lb 8150 silver
grade anti-seizelocTiTe® lb 8008 c5-a
copper anti-seizelocTiTe® lb 771nickel anti-seize
locTiTe® lb 8009 Heavy duty anti-seize
locTiTe® lb 8014 Food grade anti-seize
locTiTe® lb 8023 marine grade
anti-seize
Color Silver Copper Silver Black white Black
Solid Lubricating Agent graphite/Aluminum Copper/graphite Nickel/graphitegraphite/Calcium
Fluoridewhite Lubricating Solids Calcium Sulfonate
Torque Coefficient* 0.18 0.16 0.13 0.16 0.13 0.18
Temperature Range -30°C to +900°C -29°C to +982°C -29°C to +1,315°C -29°C to +1,315°C -29°C to +399°C -29°C to +1,315°C
Metal-Free No No No Yes Yes Yes
Package Size & IDH 500g jar - 833783 1 lb - 1751842 1 lb - 17518391 lb - 17518512 lb - 1751889
2 lb - 17519428 oz - 299175
16 oz - 1752448
heavy duty, temperatureresistant, petroleum based lubricant compound fortified with graphite and metallic flake. inert and will not evaporate or harden in extreme cold or heat. For use in assemblies up to 871°C. ABS Approved.Tested to Mil-PRF-907E.CFiA Approved. **
Exclusive formulasuspends copper andgraphite in a high qualitygrease. Protects metalparts from rust, corrosion, galling, and seizing at temperatures to 982°C. Tested to Mil-PRF-907E. CFiA Approved. **
Copper-free. Recommended for stainless steel and other metal fittings. For preventing corrosion, seizing, and galling in harsh, chemical environments, and temperatures to 1315°C. ABS Approved. **
Metal free.Excellent lubricity. Provides outstanding lubrication to all metal including stainless steel, aluminum and soft metals up to 1315°C.
Prevents seizure, galling, and friction in stainless steel and other metal parts up to 399°C. NSF h1 rated for incidental food contact. **
Formulated to protectassemblies exposed directly or indirectly to fresh and salt water, this anti-seize works especially well in high humidity conditions. it has excellent lubricity, superior water washout spray resistance, and prevents galvanic corrosion. ABS Approved.**
** All approvals are region specific. Please contact your henkel Sales Representative for further information.
addiTional prodUcTs
Name Max Temp Features
locTiTe® lb 8700 extreme pressure resistant lubricant
399˚C MOS2 based thread lubricant
locTiTe® lb 8012 low Friction lubricant 399˚CRecommended for maximum lubricity at low speeds, high loads, Metal free formulation
* K value on steel nuts and bolts
18 | Maintenance Solutions
-
WHaT Type oF anTi-seize do yoU reqUire?
general pUrpose meTal-Free applicaTionincidenTal
Food conTacTWaTer
resisTanT
Up to 871°c Up to 982°c Up to 1315°c
Henkel solUTions locTiTe® lb 8150 silver
grade anti-seizelocTiTe® lb 8008 c5-a
copper anti-seizelocTiTe® lb 771nickel anti-seize
locTiTe® lb 8009 Heavy duty anti-seize
locTiTe® lb 8014 Food grade anti-seize
locTiTe® lb 8023 marine grade
anti-seize
Color Silver Copper Silver Black white Black
Solid Lubricating Agent graphite/Aluminum Copper/graphite Nickel/graphitegraphite/Calcium
Fluoridewhite Lubricating Solids Calcium Sulfonate
Torque Coefficient* 0.18 0.16 0.13 0.16 0.13 0.18
Temperature Range -30°C to +900°C -29°C to +982°C -29°C to +1,315°C -29°C to +1,315°C -29°C to +399°C -29°C to +1,315°C
Metal-Free No No No Yes Yes Yes
Package Size & IDH 500g jar - 833783 1 lb - 1751842 1 lb - 17518391 lb - 17518512 lb - 1751889
2 lb - 17519428 oz - 299175
16 oz - 1752448
heavy duty, temperatureresistant, petroleum based lubricant compound fortified with graphite and metallic flake. inert and will not evaporate or harden in extreme cold or heat. For use in assemblies up to 871°C. ABS Approved.Tested to Mil-PRF-907E.CFiA Approved. **
Exclusive formulasuspends copper andgraphite in a high qualitygrease. Protects metalparts from rust, corrosion, galling, and seizing at temperatures to 982°C. Tested to Mil-PRF-907E. CFiA Approved. **
Copper-free. Recommended for stainless steel and other metal fittings. For preventing corrosion, seizing, and galling in harsh, chemical environments, and temperatures to 1315°C. ABS Approved. **
Metal free.Excellent lubricity. Provides outstanding lubrication to all metal including stainless steel, aluminum and soft metals up to 1315°C.
Prevents seizure, galling, and friction in stainless steel and other metal parts up to 399°C. NSF h1 rated for incidental food contact. **
Formulated to protectassemblies exposed directly or indirectly to fresh and salt water, this anti-seize works especially well in high humidity conditions. it has excellent lubricity, superior water washout spray resistance, and prevents galvanic corrosion. ABS Approved.**
** All approvals are region specific. Please contact your henkel Sales Representative for further information.
No
MetalNo
MetalNo
Metal
Maintenance Solutions | 19
-
WHaT Type oF cleaner do yoU reqUire?
general pUrpose gaskeT remoVing biodegradable degreaser
Henkel solUTions locTiTe® sF 7061 locTiTe® sF 790
chisel gasket remover
locTiTe® sF 7840natural blue biodegradable
cleaner & degreaser
locTiTe® sF 7070 odc-Free cleaner & degreaser
locTiTe® sF 7611pro strength parts cleaner
kB values N.A. greater than 200 N.A. 34 132
Package Size & IDH 100ml can - 849292510g aerosol can - 1751840
510g bottle - 14096985litre bottle - 789065
20litre bucket - 789705150g bottle - 1423361 425g bottle - 1423327
19oz aerosol can - 1752427
Solvent based (acetone) general parts cleaner, evaporates very fast, removing dirt, resins, lacquer, oils and greases from metals. Recommended for pre assembly cleaning.
Removes gaskets from any type of assembly in 10 to 15 minutes. Prepares metal parts for new gaskets, eliminating scrapin and sadin. works on wood; non-corrosive on aluminum. Not for use with plastics, Linoleum, or synthetic fibers.
Biodegradable, all-purpose, industrial strength, concentrated cleaner and degreaser. Can be economically diluted with water. Formulated for wipe down, pressure spraying, ad immersion cleaing processes at room temperature or heated. Non-flammable and non-toxic. Contains no OdCs.
A non-aqueous, hydrocarbon-based solvent designed for cleaning and degreasing surfaces to be bonded with adhesives, as well as for general purpose industrial cleaning. Safe on aluminum, rubber, and most plastics, and will not cause flash rusting on water-sensitive parts. dries residue-free. Contains no ozone-depleting compounds (OdCs).
Aggressively penetrates, dissolves, and removes oil and grease from parts. dries quickly with no residue. Contains no OdCs.
cleaning
» CLEAN ANd dEgREASE wORk SuRFACES, PARTS ANd hANdS
20 | Maintenance Solutions
-
WHaT Type oF cleaner do yoU reqUire?
general pUrpose gaskeT remoVing biodegradable degreaser
Henkel solUTions locTiTe® sF 7061 locTiTe® sF 790
chisel gasket remover
locTiTe® sF 7840natural blue biodegradable
cleaner & degreaser
locTiTe® sF 7070 odc-Free cleaner & degreaser
locTiTe® sF 7611pro strength parts cleaner
kB values N.A. greater than 200 N.A. 34 132
Package Size & IDH 100ml can - 849292510g aerosol can - 1751840
510g bottle - 14096985litre bottle - 789065
20litre bucket - 789705150g bottle - 1423361 425g bottle - 1423327
19oz aerosol can - 1752427
Solvent based (acetone) general parts cleaner, evaporates very fast, removing dirt, resins, lacquer, oils and greases from metals. Recommended for pre assembly cleaning.
Removes gaskets from any type of assembly in 10 to 15 minutes. Prepares metal parts for new gaskets, eliminating scrapin and sadin. works on wood; non-corrosive on aluminum. Not for use with plastics, Linoleum, or synthetic fibers.
Biodegradable, all-purpose, industrial strength, concentrated cleaner and degreaser. Can be economically diluted with water. Formulated for wipe down, pressure spraying, ad immersion cleaing processes at room temperature or heated. Non-flammable and non-toxic. Contains no OdCs.
A non-aqueous, hydrocarbon-based solvent designed for cleaning and degreasing surfaces to be bonded with adhesives, as well as for general purpose industrial cleaning. Safe on aluminum, rubber, and most plastics, and will not cause flash rusting on water-sensitive parts. dries residue-free. Contains no ozone-depleting compounds (OdCs).
Aggressively penetrates, dissolves, and removes oil and grease from parts. dries quickly with no residue. Contains no OdCs.
Maintenance Solutions | 21
-
addiTional prodUcTs » BELT & RuBBER REPAiR » gROuTiNg & ChOCkiNg » RuST TREATMENT » SPECiALTY LuBRiCANTS » EMERgENCY REPAiR » PROTECTivE COATiNgS
proTecTiVe coaTings
locTiTe® pc 9660maxicoat
locTiTe® sF F720rdcolor guard
locTiTe® sF 7693cold galvanizing compound
description - waxy Film Rubber Coating zinc Spray
Color - Brown Red grey
Temperature range - up to 93°C up to 93°C up to 204°C
Cure/dry time - N.A. 4 hrs. 15 mins.
belT & rUbber repair
locTiTe® pc 7393rapid rubber repair kit
locTiTe® mr Flex 80
pourable repair compound
locTiTe® mr Flex 80
putty
Color - Black Black Black
Tensile strength - 9 N/mm2 12.5 N/mm2 10 N/mm2
working time - 1 min. 20 min. 10 mins.
Functional cure - 2 hrs. 8 hrs. 8 hrs.
groUTing & cHocking
locTiTe® pc 9435marine chocking
locTiTe® pc 9626
deep pour grout
locTiTe® pc 9458
Fast set grout
Maximum temperature - 120°C 105°C 93°C
Compressive strength - 150 N/mm2 100 N/mm2 100 N/mm2
working time - 10 mins. 30 mins. 10 min.
Full cure - 24 hrs. 24 hrs. 12 hrs.
22 | Maintenance Solutions
-
rUsT TreaTmenT
locTiTe® sF 7625rust Treatment
locTiTe® sF 7600rust converter
description - Rust Converter Rust Converter
Color - Matte Black grey
Temperature range - up to 121°C NA
Cure/dry time - 30 mins. NA
rUsTed / seized FasTener loosening
locTiTe® lb 100maintain
locTiTe® lb 8711penetrating oil
locTiTe® lb 8040Freeze and release
description - Temporary rust loosener Petroleum based lubricant Mineral oil lubricant
Color - Clear liquid Pale Yellow Amber
Temperature range - NA 38°C -20°C to +45°C
emergency repair
locTiTe® 5070pipe repair kit
locTiTe®
Transformer repair kitlocTiTe®
o-ring kit
description - Epoxy Epoxy, silicone, cleaner Cyanoacrylate
Components - Yellow impregnated tapeand LOCTiTE® EA 3463
LOCTiTE® EA 3473, LOCTiTE® EA 3463, LOCTiTE® 587 Blue Maxx
Buna N cord andLOCTiTE® 406
Repair time - 30 mins. NA 15 sec.
Maintenance Solutions | 23
-
add ANOThER 20 years
locTiTe® composite repair system
LOCTITE® Composite Repair System is a fast and economical alternative to pipe replacement.The innovative repair system reinforces and seals pipes designed for high pressure, temperature and chemical resistance.It is fully certified by DNv GL according to ISO/TS 24817.
The all-in-one solution with materials for surface preparation, reinforcement and topcoat consists of :
locTiTe® composite repair system• LOCTiTE® PC 7255 Sprayable Ceramic• LOCTiTE® EA 3478 Superior Metal• LOCTiTE® PC 7210 hand Lay-up Resin• LOCTiTE® PC 5085 glass-Carbon Fiber Tape• LOCTiTE® SF 7515 Corrosion inhibitor
applicaTion areas• Repair system for steel pipes, pipelines and tanks• For inside and outside corrosion• Equipment subject to chemical attack or mechanical wear• Complex geometries: bends, tees, reducers and flanges• Oil & gas industry, refineries and petrochemical plants, power plants,
water utilities etc.
beneFiTs• Fast and economical repair solution• increase pipe lifetime by up to 20 years• No need to replace pipes• in situ repair without interruption of operations• Tailor-made repair solutions including specific calculations of
repair designs• Certified applicator and installer training program
24 | Maintenance Solutions
-
uPTO 2x proTecTion
locTiTe® pc 7000High Temperature abrasion resistant coating
LOCTITE® PC 7000 High Temperature Abrasion Resistant Coating is a unique three component, rapid setting silica based composite coating system which offers protection from abrasion up to 11000C. This is a water based environmentally friendly system. It bonds well to porous substrates like concrete, refractory bricks etc. (Metal surfaces need to be reinforced with metallic mesh before coating application.)
applicaTion areas• Coal burner nozzles• Baffle plates of coal tip burners• Refractory brick structure of chimneys
beneFiTs• upto 2 x protection from high temperature abrasion• Cost effective: Better life, more efficiency• Laminar flow of coal - air mixture for optimum efficiency
applicaTion procedUre• Prepare the application surface by proper surface preparation-(grid blasting/grinding). After surface preparation ensure the surface is clean
and free from dust, etc.• Spot weld S.S diamond pattern wire mesh over the work piece as per the application requirement.• Add part a and b to the container. Mix till uniform consistency and milky white color.• Add ceramic fillers incrementally to liquid resin while mixing vigorously with air mixer for 2-3 mins until fillers are dispersed evenly. use the
entire qty of part a:part b:filler mix it well to prepare the homogenous mixture. No part mixing is allowed.• Apply fully mixed material to prepared surface within 30 mins of mixing. Ensure 100% filling in mesh as per the required application thickness.
• Allow coating to cure at room temperature for 24 hrs. After room temperature cure, heat cure @ 3500C for 10 mins.
Burner tip: after wear Burner tip coated with LOCTITE® PC 7000 HTARC: after wear
Burner Tip Wearafter 1 Year of PC 7000 Application
Maintenance Solutions | 25
-
proTecTion THroUgHoUT yoUr FaciliTy » FOR EvERY iNduSTRY, LOCTiTE SOLuTiONS wiLL hELP REPAiR, REBuiLd ANd PROTECT YOuR vALuABLES ASSETS.
26 | Maintenance Solutions
-
Maintenance Solutions | 27
-
solUTions To common mainTenance cHallenges » LOCTiTE® ENgiNEERiNg AdhESivES ANd SEALANTS ARE dESigNEd TO OFFER YOu MORE RELiABiLiTY ANd COST-SAviNgS OvER CONvENTiONAL MAiNTENANCE METhOdS.
THreadlocking
Traditional method problem locTiTe® solution
LOCkNuTS • Double cost.• Requires extra space. • Corrodes in place.• Time consuming to assemble.
• Locks single nut.• Uses standard parts.• Seals against corrosion.• Fast assembly.
SPRiNg wAShERS • Not an effective locking system.• Can damage contact faces.• Large inventory.
• Completely vibration proof.• No damage, No corrosion.• One bottle size for all size threads.
NYLON iNSERTS • On-torque needed.• Ineffective under severe vibration. • Requires good access.• Should not be re-used.
• Low on-torque.• Effective on adverse conditions.• Easy to apply.• Allows parts to be re-used.
TAB wAShERS / SPLiT PiNS • Difficult production use.• Expensive.• Special design required.
• Apply manually or automatically.• Uses standard parts.
THread sealing
Traditional method problem locTiTe® solution
TAPES • Shredding clogs pipes.• Manual application only. • Elbow alignment.• Overtightening causes damage.• Poor vibration resistance.
• Unused sealant flushed away.• Automation possible.• Seals/locks in any position.• Vibration proof.
PASTES • Creeping/shrinkage.• Poor chemical resistance.• Poor vibration resistance.
• Sealed for life.• Resists most solvents.• Vibration proof.
'O' RiNgS • Large inventory needed.• Easily damaged. • Special joint design.
• Universal products.• No parts to handle.• Uses standard parts.
CONE FiTTiNgS • Costly machining.• Easily damaged.
• Use standard parts.• Use with damaged cone fitting to ensure complete seal.
28 | Maintenance Solutions
-
gaskeTing
Traditional method problem locTiTe® solution
PRE-FORMEd MATERiALS • Relaxation.• Re-torquing. • Corrosion/fretting.• Manual application.• Large inventory.
• Constant seal / no re-torquing.• Total seal.• Automation possible.
'O' RiNgS • Manual application.• Extra machining operation.• Large inventory.
• Automation possible.• Standard parts used.• No parts to handle.• Low inventory.
SEALiNg COMPOuNdS • Often solvent based.• Can cause clogging. • Re-torquing.• Messy.
• Solvent-free.• Unused adhesive flushed away.• No relaxation.• Accurate application.
CuTTiNg PAPER gASkETS • Time consuming.• Operator skill.• inconsistent performance.
• Little preparation.• Easy to apply.• Constant performance.
reTaining
Traditional method problem locTiTe® solution
PRESS FiT • high stress.• Fretting possible. • Assembly equipment required.
• Load spread over joint.• Can use lighter parts.• Hand assembly possible.• Relaxed tolerances.
gRuB SCREwS • Poor metal to metal contact.• Low torque transmission.• Extra machining.
• 100% contact.• Total surface contact creates high torque capability.• Basic machining.
kEYS • Prone to backlash and chattering.• Costly to produce. • Accurate machining.
• No movement/fretting eliminated.• One adhesive suits many applications.• Allows relaxed tolerances.
SPLiNES • Costly machining.• Special design• Prone to wear.
• Basic machining.• Normal parts.• No movement / fretting.
PiNS • high stress concentration.• Prone to backlash.• Costly machining.
• Distributed stress.• No movement / fretting.• No extra work.
Maintenance Solutions | 29
-
prodUcT orderinginFormaTion
LOCTiTE 222 ThREAdLOCkER
LOCTiTE 222 ThREAdLOCkER
LOCTiTE 243 ThREAdLOCkER
LOCTiTE 243 ThREAdLOCkER
LOCTiTE 243 ThREAdLOCkER
LOCTiTE 243 ThREAdLOCkER
LOCTiTE 263 ThREAdLOCkER
LOCTiTE 263 ThREAdLOCkER
LOCTiTE 277 ThREAdLOCkER
LOCTiTE 277 ThREAdLOCkER
LOCTiTE 290 ThREAdLOCkER
LOCTiTE 290 ThREAdLOCkER
LOCTiTE 401 iNSTANT AdhESivE
LOCTiTE 401 iNSTANT AdhESivE
LOCTiTE 406 iNSTANT AdhESivE
LOCTiTE 415 iNSTANT AdhESivE
LOCTiTE 415 iNSTANT AdhESivE
LOCTiTE 454 iNSTANT AdhESivE
LOCTiTE 454 iNSTANT AdhESivE
LOCTiTE 495 iNSTANT AdhESivE
LOCTiTE 510 FLANgE SEALANT
LOCTiTE 510 FLANgE SEALANT
LOCTiTE 510 FLANgE SEALANT
LOCTiTE 518 FLANgE SEALANT
LOCTiTE 518 FLANgE SEALANT
LOCTiTE 542 ThREAd SEALANT
LOCTiTE 542 ThREAd SEALANT
LOCTiTE 55 PiPE SEALiNg CORd
LOCTiTE 565 ThREAd SEALANT
LOCTiTE 565 ThREAd SEALANT
LOCTiTE 567 ThREAd SEALANT
LOCTiTE 567 ThREAd SEALANT
LOCTiTE 574 FLANgE SEALANT
LOCTiTE 574 FLANgE SEALANT
LOCTiTE 577 ThREAd SEALANT
LOCTiTE 577 ThREAd SEALANT
LOCTiTE 609 RETAiNER
LOCTiTE 609 RETAiNER
LOCTiTE 638 RETAiNER
LOCTiTE 638 RETAiNER
LOCTiTE 641 RETAiNER
LOCTiTE 641 RETAiNER
LOCTiTE 648 RETAiNER
LOCTiTE 648 RETAiNER
LOCTiTE 660 RETAiNER
LOCTiTE EA 3463 METAL MAgiC STEEL STiCk
LOCTiTE EA 3478 SuPERiOR METAL
LOCTiTE EA 3471 STEEL PuTTY
LOCTiTE EA 3471 STEEL PuTTY
LOCTiTE PC 3473 FAST STEEL PuTTY
LOCTiTE EA 3479 METAL SET hTA
250 ml bottle
50 ml bottle
250 ml bottle
50 ml bottle
10 ml bottle
1 litre bottle
250 ml bottle
50 ml bottle
250 ml bottle
50 ml bottle
250 ml bottle
50 ml bottle
20g bottle
1litre bottle
20g bottle
20g bottle
500gm bottle
20g bottle
300g cartridge
20g bottle
300ml cartridge
250ml tottle tube
50ml tottle tube
250ml tottle tube
50ml tottle tube
250 ml bottle
50 ml bottle
150 metres
250 ml bottle
50 ml bottle
250 ml bottle
50 ml bottle
250ml tottle tube
50ml tottle tube
250 ml tottle tube
50 ml tottle tube
250ml bottle
50ml bottle
250ml bottle
50ml bottle
250ml bottle
50ml bottle
250ml bottle
50ml bottle
50ml bottle
4 oz
1 kg
1 lb
1 lb
500 g can
500 g
848062
848063
531707
1367282
1427418
833788
1511183
1367281
531722
531723
848069
531724
1669715
833784
1669713
848003
849230
1752383
88525
1669711
910888
848731
848390
2118117
2118119
848736
848735
1752446
1752552
1751917
1752545
1752537
848734
848739
2121367
2121780
848745
848744
1865048
1865160
848750
848752
1865164
1865163
1752417
1752399
680035
1752406
1752434
680036
1752395
5
5
5
5
5
5
5
5
5
5
4
4
12
12
13
13
13
13
13
13
8
8
8
8
8
7
7
6
7
7
7
7
9
9
7
7
11
11
11
11
11
11
11
11
10
14
14
14
14
15
15
product name product nameidH no. idH no.pkg. size pkg. sizepage page
LOCTiTE PC 9410 MAgNA CRETE
LOCTiTE PC 9416 FLOOR FiLL
LOCTiTE PC 9416 FLOOR FiLL
LOCTiTE PC 7222 wEAR RESiSTANT PuTTY
LOCTiTE MR FLEx 80 PuTTY
LOCTiTE PC 7333 BRuShABLE CERAMiC
LOCTiTE PC 7218 wEARiNg COMPOuNd
LOCTiTE PC 7218 wEARiNg COMPOuNd
LOCTiTE PC 7226 PNEu wEAR
LOCTiTE PC 7226 PNEu wEAR
LOCTiTE PC 7320 FLExiBLE STRuCTuRAL COATiNg
LOCTiTE PC 7319 ChEMiCAL RESiSTANT COATiNg
LOCTiTE LB 771 NiCkEL ANTi-SEizE
LOCTiTE LB 8008 C5-A COPPER ANTi-SEizE
LOCTiTE LB 8009 hEAvY duTY ANTi-SEizE
LOCTiTE LB 8009 hEAvY duTY ANTi-SEizE
LOCTiTE LB 8014 FOOdgRAdE ANTi-SEizE
LOCTiTE LB 8023 MARiNE gRAdE ANTi-SEizE
LOCTiTE LB 8150 SiLvER ANTi-SEizE
LOCTiTE SF 7061 SuRFACE CLEANER
LOCTiTE SF 7070 OdC-FREE CLEANER ANd dEgREASER
LOCTiTE SF 7070 OdC-FREE CLEANER ANd dEgREASER
LOCTiTE SF 7611 PRO STRENgTh PARTS CLEANER
LOCTiTE SF 7840 NATuRAL BLuE
LOCTiTE SF 7840 NATuRAL BLuE
LOCTiTE SF 790 ChiSEL gASkET REMOvER
LOCTiTE SF 790 ChiSEL gASkET REMOvER
LOCTiTE Si 587 BLuE
LOCTiTE Si 587
LOCTiTE Si 5900
LOCTiTE Si 596 high TEMP REd SiLiCONE
LOCTiTE PC 7393 RAPid RuBBER
LOCTiTE MR 5000 RAPid RuBBER REPAiR kiT
LOCTiTE MR FLEx 80 PuTTY
LOCTiTE PC 9435 MARiNE ChOCkiNg
LOCTiTE PC 9626 dEEP POuR gROuT
LOCTiTE PC 9458 FAST SET gROuT
LOCTiTE SF 7625 RuST TREATMENT
LOCTiTE LB 100 MAiNTAiN
LOCTiTE SF 7600 RuST CONvERTER
LOCTiTE SF 7600 RuST CONvERTER
LOCTiTE LB 8711 PENETRATiNg OiL
LOCTiTE LB 8017 MOLY dRY FiLM
LOCTiTE LB 8040 FREEzE ANd RELEASE
LOCTiTE 5070 PiPE REPAiR kiT
LOCTiTE TRANSFORMER REPAiR kiT
LOCTiTE O-RiNg kiT
LOCTiTE O-RiNg kiT
LOCTiTE PC 9660 MAxiCOAT
LOCTiTE SF F720Rd COLOR guARd
LOCTiTE SF 7693 COLd gALvANiziNg COMPOuNd
5 gal
5 kg
20 kg
500 g
1 lb
1 kg
2 kg
10 kg
2 kg
10 kg
20 kg
20 kg
1 lb
1 lb
1 lb
2 lb
2 lb
16 oz
500g jar
100ml aerosol can
150g bottle
425g bottle
19 oz aerosol can
20litre bucket
5litre bottle
510g aerosol can
510g bottle
95g tube
300ml cartridge
300ml cartridge
300ml cartridge
400ml
400ml
1 lb
3.4kg
50 lb
2 gal
1 gal
312g aerosol can
1 litre
4 litre
16 oz aerosol can
12 oz
310ml
2 x 6
NA
mm size
inch size
1 gal
1 gal
15 oz aerosol can
235573
680838
1400736
679971
1752404
680038
680839
1402022
1751940
1751941
2084171
1678824
1751839
1751842
1751851
1751889
1751942
1752448
833783
849292
1423361
1423327
1752427
789705
789065
1751840
1409698
1266356
1246389
1257126
317667
1752457
1752458
1752404
1422843
1752439
1751943
1751843
627004
1649154
1649155
1751845
1751859
1752559
1752402
1035886
1754762
1754763
1751848
1751913
1751854
15
15
15
15
16
16
17
17
17
17
17
17
19
19
19
19
19
19
18
20
21
21
21
21
21
21
21
9
9
9
9
22
22
22
22
22
22
22
22
22
22
23
23
23
23
23
23
23
23
23
23
30 | Maintenance Solutions
-
pr
op
erTi
es c
Ha
rT
Page
Prod
uct
Size
Cove
rage
@
6m
m
thic
knes
s
Colo
urD
ry S
ervi
ce
Tem
pera
ture
R
ange
Com
pres
sive
St
reng
thN
/mm
2
Elon
gati
on %
Sh
ear
Stre
ngth
N/m
m2 ,
0.1
mm
gap
an
d et
ch a
lum
iniu
m
Tens
ile
Stre
ngth
N/m
m2
Har
dnes
sSh
ore
D
Wor
king
Ti
me
Min
utes
@ 2
5°C
Cure
Tim
eH
ours
@ 2
5°C
Mix
Rat
ioby
vol
ume
(R:H
)M
ix R
atio
by w
eigh
t (R
:H)
14LO
CTiT
E® E
A 3
478
Supe
rior
Met
al1
kg k
it23
2cm
2d
ark
gre
y-3
0ºC
to +
120
ºC12
5 N
/mm
2-
17 N
/mm
238
N/m
m2
9020
64:
17.
25:1
14LO
CTiT
E® E
A 3
471
Stee
l Put
ty1
lb k
it27
8cm
2g
rey
-30
ºC to
+10
5ºC
61.7
N/m
m2
-9.
6 N
/mm
227
.8 N
/mm
282
306
2.5:
16.
25:1
15LO
CTiT
E® P
C 34
73 F
ast S
teel
Put
ty50
0 g
kit
370
cm2
gre
y-3
0ºC
to +
95ºC
51 N
/mm
2-
15 N
/mm
227
N/m
m2
803
10 m
in1:
110
0:5
6.5
15LO
CTiT
E® P
C 72
22 w
ear
Resi
stan
t Put
ty50
0 g
kit
380
cm2
gre
y-3
0ºC
to +
105º
C72
N/m
m2
-16
.8 N
/mm
221
N/m
m2
8530
62:
12:
1
22LO
CTiT
E® P
C 73
93 R
apid
Rub
ber
Repa
ir40
0 m
l du
al
cart
ridg
e-
Blac
k-2
9ºC
to +
82.2
ºC-
-3.
7 N
/mm
2-
**86
12
1:1
-
22LO
CTiT
E® M
R F
lex
80 P
utty
1 lb
kit
604c
m2
Blac
k-2
9ºC
to +
82.2
ºC-
350
3.3
N/m
m2
-**
8810
82.
5:1
2.6:
1
22LO
CTiT
E® M
R F
lex
80 P
oura
ble
Repa
ir C
ompo
und
1 lb
kit
442c
m2
Blac
k-3
0ºC
to +
80ºC
-23
73.
6 N
/mm
27.
5 N
/mm
2**
8720
810
0:1
3.3
77:2
3
14LO
CTiT
E® E
A 3
463
Met
al M
agic
Ste
elTM
Sti
ck11
3 g
stic
k45
cm2
gre
y-3
0ºC
to +
120
ºC83
N/m
m2
-≥
3.4
5 N
/mm
²17
.2 N
/mm
2>7
02.
5-5
10 m
in-
-
15LO
CTiT
E® P
C 94
10 M
agna
Cre
te5
gal k
it52
m2
gre
y-5
0ºC
to +
1,10
0ºC
90 N
/mm
²-
--
-5-
201-
2Re
fer
to T
dS
Refe
r to
Td
S
15LO
CTiT
E® P
C 94
16 F
loor
Fill
20 k
g ki
t-
gre
y-3
0ºC
to +
110
ºC90
N/m
m²
--
--
4024
16:3
.2:8
0.8
4.6
:1:9
.8
17LO
CTiT
E® P
C 72
18 w
eari
ng C
ompo
und
2 kg
kit
1480
cm2
gre
y-3
0ºC
to +
120
ºC11
0.3
N/m
m²
--
-90
307
2:1
2:1
16LO
CTiT
E® P
C 23
5597
ultr
a h
igh
Tem
pera
ture
Pne
u w
ear
25 lb
kit
0.8
m2
Red
-29º
C to
+28
8ºC
--
34.5
N/m
m2
-90
302
hrs
@ 1
45ºC
2:1
2.27
:1
16LO
CTiT
E® P
C 73
33 B
rush
able
Cer
amic
1 kg
kit
*1.1
m2
dar
k g
rey
-29º
C to
+12
0ºC
70 N
/mm
2-
21 N
/mm
230
N/m
m2
8530
62.
75:1
4.8
:1
16LO
CTiT
E® P
C 72
34 h
igh
Tem
pera
ture
Bru
shab
le C
eram
ic2
lb k
it*1
.1m
2Re
d-2
9ºC
to +
288º
C10
2 N
/mm
2-
16.7
N/m
m2
37 N
/mm
288
120
8 hr
s+
3 hr
s @
150
ºC2.
6:1
4.2
5:1
17LO
CTiT
E® P
C 73
19 C
hem
ical
Res
ista
nt C
oati
ng20
kg
kit
*6.8
m2
gre
y-3
0ºC
to +
120
ºC68
N/m
m2
-18
.2 N
/mm
233
N/m
m2
8530
162.
3:1
3.4:
1
*0.5
mm
thic
k la
yer
**Sh
ore
A
-
Henkel adhesives Technologies india private limited
mumbaicorporate office10th Floor, kesar Solitaire,Plot No. 5, Sector - 19, Sanpada,Navi Mumbai - 400705,Maharashtra, indiaPhone : +91 22 3929 6600
puneSurvey No. 234, 235 and 245,Phase 1, hinjewadi,Pune - 411 057Maharashtra, indiaPhone : +91 020 3980 3100
Factoryd3/d4, MidC industrial Estate,jejuri - 412 303. Pune districtMaharashtra, indiaPhone : +91 0211 530 0017
® All trademarks, except where otherwise noted, are the properties of or used under licence by henkel. All images are indicative only.© Copyright 2014. henkel Corporation. All rights reserved. iN-0768-Ag/Maintenance Solutions/062016
chennaiArunodayam, No. 14 & 16,Raman Street, North Boag Road,T. Nagar, Chennai - 600 017,Tamil Nadu, indiaPhone : +91 44 3354 6123
delhi407, 4th Floor, Centrum Plaza,Opp. Suncity Business Tower,golf Course Road, Sector - 53,gurgaon - 122 002.Phone : +91 124 385 1102