major projects reference list - · pdf filegeocean libya syrthe libya pipeline project 27....

APAVE INTERNATIONAL SAS Tel. : 05 56 77 27 27 - Fax : 05 56 77 27 00 - Site Internet : www.apave.com

Société par Actions Simplifiée au Capital de 6 502 500 € - N° SIREN : 775 581 812

MAJOR PROJECTS REFERENCE LIST

OF APAVE INTERNATIONAL

http://www.apave.com

MAIN REFERENCE LIST International



1. REFERENCE LIST

N° Client Country Title 1. TE-TO MACEDONIA TPI 2. OKTA MACEDONIA NDT 3. EXXONMOBIL EG UT Thickness 4. SCLOG CONGO UT Thickness 5. SBM EG UT Thickness

6. TOTAL CONGO UT Thickness 7. ELEM REK MACEDONIA NDT 8. TOTAL ANGOLA NDT – Shut down 9. TOTAL ANGOLA NDT - Shut down

10. TOTAL ANGOLA NDT- Shut down

11. EXXON MOBIL ANGOLA TPI - Shut down 12. SONANGO ANGOLA TPI 13. SONANGO ANGOLA TPI 14. SCHLUMBERGER CHAD PSV Inspection 15. SCHLUMBERGER GHANA Inspection, recalibration and re-certification

of pressure gauges and chart recorders 16. SCHLUMBERGER GHANA Inspection and recertification of PSV’/ PRV’s 17. SCHLUMBERGER LIBYA Lifting Inspection 18. SCHLUMBERGER LIBYA Lifting, Tubular, NDT and pressure

inspection 19. TULLOW GHANA Lifting and Tubular Inspection 20. SONATRACH ALGERIA Total Abu Al Bukhoosh

21. TOTAL GABON NDT and Lifting Inspection 22. ALNG ANGOLA ALNG Tanks 23. TOTAL CHAD Distribution Networking-Downstream 24. AMPCO EQUATORIAL GUINEA AMPCO JETTY Pipeline 25. ZUEITINA OIL COMPANY LIBYA EPC Compressor station and facilities – 103

A 26. GEOCEAN LIBYA Syrthe Libya pipeline project 27. OKTA MACEDONIA OKTA Refinery for Crude Oil 28. TE-TO MACEDONIA 220 MW CCPP Project – Skopje 29. GAMA POWER SYSTEMS MACEDONIA 220 MW CCPP Project – Skopje 30. ARCELOR MITTAL MACEDONIA MRS ARCELOR MITTAL 31. JOHNSON MATTHEY MACEDONIA Free economic zone – Bunardzik – Pipeline

Inspection 32. KEMET MACEDONIA FREE ECONOMIC ZONE BUNARDZIK –





PIPELINE INSPECTION 33. GAMA MACEDONIA GAMA – FURNA DIME/ZDRAVJE RADOVO 34. TCC CHAD, CAMEROON TPI Chad – Cameroon pipe line 35. KBR CHAD NDT 36. OHIS MACEDONIA Inspection and tests on Ammonia tanks 37. ALKALOID MACEDONIA Inspection on Ammonia tanks 38. LYON, PETROMAR, BECHTEL ANGOLA NDT on the construction of the tanks 39. PETROMAR (SAIPEM

ANGOLA) ANGOLA NDT

40. BOSCONGO (SAIPEM) CONGO NDT 41. ARCELOR MITTAL MACEDONIA In service Inspection 42. ENI CONGO Electrical inspection 43. ENI CONGO NDT 44. DEZPC-TOTAL SYRIA Third party inspection and commissioning.

Electrical training 45. TOTAL QATAR Third party inspection and commissioning 46. TOTAL NIGERIA Third party inspection of onshore and

offshore installations and equipment, technical assistance and training

47. COMINAK COGEMA NIGERIA Third party inspection and training of an uranium mine

48. TOTAL MYANMAR Third party inspection 49. KOTC KUWAIT Electrical inspection & infrared survey 50. PAM KUWAIT Electrical expertise on a gas carrousel 51. THE FRIENDSHIP COUNCIL IVORY COAST, BURKINA

FASO, NIGER, TOGO AND BENIN

Improvement of electric installation safety

52. TOTAL INDONESIA Inspection of electrical installations 53. TOTAL GABON Third party inspection of onshore and


54. ATOCHEM - NORSK HYDRO RHONE POULENC - SOBEGI

FRANCE Third party inspection commissioning and training

55. TOTAL FRANCE Third party inspection and commissioning 56. ESSO FRANCE Third party inspection 57. TOTAL CONGO Third party inspection of onshore and


58. TOTAL YEMEN Inspection of electrical installations 59. TOTAL CAMEROON Third party inspection of onshore and






60. TOTAL ANGOLA Third party inspection of onshore and offshore installations and equipment, technical assistance and training

61. PETROLEUM COMPANIES (TOTAL FINA ELF AND OTHERS)

EUROPE, AFRICA INDONESIA

Technical assistance to the production and distribution sectors

62. TOTAL BOLIVIA Inspection of electrical installations 63. CEN-TCU EUROPEAN

STANDARDS COMMITTEE 10 CEC COUNTRIES Training program for personnel testing

laboratories operating in relation with pressure equipment directives

64. TOTAL VENEZUELA Inspection of electrical installations 65. TOTAL ROMANIA/KHASAHSTAN Third party inspection and acceptance tests

of electrical installations and equipment 66. MATRA EGYPT Reliability of electrical installation 67. TOTAL UK Third party inspection and commissioning 68. GASCO U.A.E. Third party inspection and training 69. TOTAL INDIA Third party inspection of all technical

installations of apartment buildings & villas

70. SEREPT TUNISIA Technical audits 71. EXXON MOBIL CHAD NDT 72. EXXON MOBIL CHAD Lifting inspection and training 73. SOGARA GABON Metallic Structure study 74. TOTAL GABON GABON NDT & Lifting 75. EXXON MOBIL EQUAT. GUINEA NDT – Maintenance department 76. MARATHON OIL EQUAT. GUINEA NDT – Maintenance department 77. AMPCO EQUAT. GUINEA NDT – Maintenance department 78. TOTAL GE EQUAT. GUINEA NDT-Maintenance department 79. TOTAL ABK U.A.E. Total Abu Al Bukhoosh 80. ZADCO U.A.E. Electrical training 81. TOTCO & COTCO CHAD & CAMEROUN NDT-Maintenance department 82. TOTAL OUTRE MER GABON Pressure vessels on GPL Tanks Sphere –

SGEPP 6000 m3 83. FRIEDLANDER BURKINA FASO Pressure vessels on GPL Tanks Sphere –

SONABHY – 4500 m3 84. COTCO (EXXON MOBIL

Cameroun) CAMEROON NDT / PSV inspection

85. HALIBURTON ANGOLA Lifting, Tubular and Pressure Testing

86. SCHLUMBERGER ANGOLA Lifting, Tubular and Pressure Testing

87. EXPRO GHANA PSV/PRV & Lifting Inspection

88. KOSMOS GHANA Lifting and tubular inspection





89. CHEVRON GHANA Lifting and tubular inspection

90. BAKER HUGHES GHANA PSV/PRV & Lifting Inspection

91. EXXONMOBIL CHAD-CAMEROON UT TOFD, Phased Array Inspection, Pressure Vessels, Piping

92. EXXONMOBIL CHAD Phased Array inspection

93. EXXONMOBIL RUSSIA Manual PA and TOFD

94. EXXONMOBIL EQUATORIAL GUINEA TOFD, PA, Hydroform, RMS

95. Hellenic Petroleum-OKTA Refinery

MACEDONIA Phased Array and TOFD Inspection

96. LNG ANGOLA TOFD and PA

97. ENQUEST, NORTH SEA UK TOFD inspection offshore

98. TOTAL CONGO Tank Farm Inspection and Calibration/Dimensional Certification

99. TOTAL GABON Tank Farm Inspection and Calibration/Dimensional Certification

100. GE PETROL EQUATORIAL GUINEA Tank Farm Inspection and Calibration/Dimensional Certification

101. TOTAL GE BATA EQUATORIAL GUINEA Various Tank construction, refurbishment NDT Inspections and Calibration/Dimensional

102. Hellenic Petroleum - OKTA Refinery

MACEDONIA Various Tank construction, refurbishment NDT Inspections and Calibration/Dimensional Certification

103. PORTO ROMANO ALBANIA Tank Farm Construction Inspection,

Calibration/Dim Cert

104. EXXONMOBIL CHAD Tank Inspection/MFL, FLOOR MAP

105. EXXONMOBIL RUSSIA Floor Map inspection on oil tank

106. TOTAL E&P CONGO MFL FLOO MAP Inspection on oil storage tank

107. AMPCO EQUATORIAL GUINEA MFL FLOOR MAP Inspection on the floor plates

108. DUNG QUAT VIETNAM IRIS Inspection

109. TRANSOCEAN CONGO ET Inspection on heat exchangers





110. EG LNG EQUATORIAL GUINEA ET, UT and VT inspection on heat exchangers

111. SHELL GAMBA GABON RMS , MFL Floormap, RMS, UT and VT inspections on tanks shell

112. MARATHON EQUATORIAL GUINEA Shutdown project; Tube inspections

113. QAPCO QATAR Shutdown project-Inspection services

114. HESS

Equatorial Guinea

Inspection services

115. ExxonMobil Equatorial Guinea

Inspection services

116. TOTAL Congo

Inspection services

117. SBM Equatorial Guinea

Inspection services

118. ExxonMobil

Equatorial Guinea Inspection services

119. ExxonMobil

Equatorial Guinea

Inspection services

120. HESS Equatorial Guinea

Inspection services

121. TOTAL

Congo

Inspection services

122. ExxonMobil

Equatorial Guinea

Inspection services

123. HESS

Equatorial Guinea

Inspection services

124. CNR

Gabon

Inspection services

125. Marathon Oil

Equatorial Guinea

Inspection services

126. PERENCO

Gabon

Inspection services

127. OKTA

Macedonia

Inspection services

128. NOBEL ENERGY

Equatorial Guinea

Inspection services

129. Exxon Naftegas Limited

Russian federation

Inspection services

130. ExxonMobil, Kome 5,

Chad Inspection services

131. TOTAL

Angola

Inspection services

132. EG LNG

Equatorial Guinea

Inspection services

133. Angola LNG

Angola

Inspection services

134. CNR

Gabon

Inspection services





135. HESS

Equatorial Guinea

Inspection services

136. SBM

Equatorial Guinea

Inspection services

137. AMPCO

Equatorial Guinea

Inspection services

138. EG LNG


139. EXXON MOBIL

Equatorial Guinea

Inspection services

140. Marathon Oil


2. CONTACT DETAILS Here below is our list of contacts that can be contacted for our various contracts:

Marathon Oil Maintenance Department Contract MEGPL Alistair Buchnon and Mike Schwesser [email protected]

MEGPL Global Project Services Group

Ken Lambert [email protected] or [email protected]

Exxon Mobil EG Contract George Lang – [email protected]

HESS Contract [email protected] or [email protected] Graham Wilson is our contract owner and can be reached on the EGOFM address; the QAQC can also answer and give references

Exxon Mobil Chad Contract

Mike Palmer – [email protected]

Shell Gabon Contract Jannie De Beer – [email protected]

Tullow Oil Ghana Contract

Andrew Smith and Mark Mair; Tel: +233244342109

Kosmos Ghana Contract Jake Stevens and Paul Skoyles Tel: +23320433918

In addition, please find attached our reference list. We have selected 140 References and developed some of them that are the most pertinent where we explain our scope of work.


mailto:[email protected]











3. PROJECT DESCRIPTION

No. 1 Project title: TPI

CLIENT Country Total Job Value

Proportion carried out by candidate

No. of personnel provided

Year

TE -TO MACEDONIA / 100% 5 2013 Scope of work APAVE’s role in the project Final inspection on pressure equipment in Gas power station TE-TO. TPI

NDT Inspection Integrity checking

No. 2 Project title: NDT INSPECTIONS




Year

OKTA MACEDONIA / 100% 9 2013 Scope of work APAVE’s role in the project Periodical inspection on complete pressure equipment including oil and gas production pipelines

TPI NDT Inspection Integrity checking

No. 3 Project title: UT- THICKNESS




Year

EXXONMOBIL EG / 100% 2 2013 Scope of work APAVE’s role in the project ZP-EXXONMOBIL-UT Thickness measurements on piping UT Thickness measurements





Year

SCLOG CONGO / 100% 3 2013 Scope of work APAVE’s role in the project UT Thickness measurements on pressure vessels, heat exchangers and tube inspection

UT Thickness measurements

Eddy Current(ET) IRIS









Year

SBM EG / 100% 2 2013 Scope of work APAVE’s role in the project UT Thickness measurements on tanks UT Thickness





Year

TOTAL CONGO / 100% 3 2013 Scope of work APAVE’s role in the project UT Thickness measurements on piping UT

No. 7 Project title: REK ELEM BITOLA – NDT




Year

REK ELEM MACEDONIA / 100% 10 2013 Scope of work APAVE’s role in the project Modernization and reconstruction on block Number 2 and Number 3 in REK BITOLA

NDT UT thickness measurements RT VT MT; MPI Hardness testing

No. 8 Project title: TOTAL ANGOLA – NDT




Year

TOTAL ANGOLA / 100% 8 December 2012

Scope of work APAVE’s role in the project Shut down of FPSO “Girasol” performing: RT, PT, UT, MT, pipes and structure

NDT-Pressure vessels inspection





Year

TOTAL ANGOLA / 100% 10 January 2013

Scope of work APAVE’s role in the project Shut down of FPSO “Dalia” performing: RT, PT, UT, MT and pipes NDT-Pressure vessels inspection









Year

TOTAL ANGOLA

/ 100% 8 July 2012

Scope of work APAVE’s role in the project Shut down of FPSO “Dalia” performing: RT, PT, UT, MT and phased array NDT-Pressure vessels

inspection

No. 11 Project title: EXXON MOBIL ANGOLA - TPI




Year

Exxon Mobil Angola / 100% 2 January 2012

Scope of work APAVE’s role in the project Shut down of Kizzomba satellite performing: MT and UT Inspection TPI

No. 12 Project title: SONANGO ANGOLA - TPI




Year

SONANGO Angola / 100% 4 2005-present

Scope of work APAVE’s role in the project Performing RT Inspection on pipelines and tanks TPI

No. 13 Project title: SONANGO ANGOLA - TPI




Year

SONANGO Angola / 100% 2 January 2012-present

Scope of work APAVE’s role in the project Performing RT Inspection on pipelines on several projects: TEMMAR BOM JESUS etc.

TPI

No. 14 Project title: SCHLUMBERGER – PSV INSPECTION




Year

SCHLUMBERGER CHAD 10.400$ per year

100% 1 2012-2013

Scope of work APAVE’s role in the project PSV Inspection TPI





No. 15 Project title: SCHLUMBERGER – PRESSURE GAUGES & CHART RECORDERS




Year

SCHLUMBERGER GHANA Up to 30.000 $ 100% 3 2012-present

Scope of work APAVE’s role in the project Inspection, recalibration and re-certification of pressure gauges and chart recorders

Inspection, recalibration and re-certification

No. 16 Project title: SCHLUMBERGER - PSV’s/PRV’s




Year

SCHLUMBERGER GHANA Up to 30.000 $ 100% 3 2012-present

Scope of work APAVE’s role in the project Inspection and recertification of PSV’s/ PRV’s Inspection and recertification

No. 17 Project title: SCHLUMBERGER – LIFTING INSPECTION




Year

SCHLUMBERGER LIBYA / 100% 4 2013- present

Scope of work APAVE’s role in the project Lifting Operations: lifting accessories and rig-up equipment Lifting Inspection

No. 18 Project title: SCHLUMBERGER – LIFTING GEARS INSPECTION, TUBULAR INSPECTION, NDT & PRESSURE TESTING




Year

SCHLUMBERGER LIBYA 800.000 $ per year

100% 12 2009-2013

Scope of work APAVE’s role in the project Lifting gears inspection , Tubular inspection, NDT, Pressure testing TPI

No. 19 Project title: LIFTING AND TUBULAR INSPECTION




Year

TULLOW GHANA 1.200.000 $ per year

100% 10 2010- present

Scope of work APAVE’s role in the project Lifting and tubular inspections Lifting and tubular inspections





No. 21 Project title: NDT AND LIFTING – TOTAL GABON




Year

TOTAL GABON GABON

700.000 $ 100% 10 2010

Scope of work APAVE’s role in the project APAVE is in charge of all NDT testing (PT/MT, Eddy Current, IRIS;AE) on all equipment of the sites of PORT GENTIL on shore and off shore. Apave is also in charge of all the inspection of the totality of the lifting equipment (Port Gentil – Offshore: Grondin, Anguille, Torpille – and on shore: cap Lopez, Industrial base Port Gentil,)

Lifting inspection of all the lifting equipment of TOTAL GABON off shore and on shore (Cranes, forklift, shackles, basket) NDT inspection for all the sites of PORT GENTIL

No. 22 Project title: ALNG TANKS




Year

ALNG Angola 6.000.000 $ 100% 32 2010 Scope of work APAVE’s role in the project Inspection on LNG Tanks 9% Ni AND LNG pipeline NDT

PSV Inspection

No. 23 Project title: DISTRIBUTION NETWORKING




Year

TOTAL Chad 120.000 $ 100% 2 2009/2010 Scope of work APAVE’s role in the project Inspection on various pressure equipment and tanks Inspection of Pressure

equipment

No. 24 Project title: AMPCO JETTY PIPELINE




Year

AMPCO Equatorial Guinea

60.000 $ / year 100% 4 2009

No. 20 Project title: TOTAL ABU AL BUKHOOSH




Year

SONATRACH ALGERIA 120.000 $ 100% 3 2001 - present

Scope of work APAVE’s role in the project Inspection of lifting equipment of SONATRACH Training of about 90 persons per year

Lifting inspection Training in lifting equipment/ Drivers





Scope of work APAVE’s role in the project Inspection on various pressure equipment Inspection of Pressure

equipment

No. 25 Project title: EPC COMPRESSOR STATION AND FACILITIES – 103 A




Year

ZUEITINA OIL COMPANY

Libya 900.000 $ / year

100% 6 2009

Scope of work APAVE’s role in the project Commissioning and Third Party Inspection on gas transmission pipeline to coastal network

TPI

No. 26 Project title: SYRTHE LIBYA PIPELINE PROJECT




Year

GEOCEAN Libya 2.600.000 $ 100% 4 2009 - 2010

Scope of work APAVE’s role in the project Al Khalid 4x350 MW Power Plant 55 km of pipeline performing

NDT inspection, UT TOFD, MT, RT

No. 27 Project title: OKTA RAFINERY FOR CRUDE OIL




Year

OKTA Macedonia CONF. 100% 24 2009 - 2010

Scope of work APAVE’s role in the project Periodical inspection on complete pressure equipment including oil and gas production pipelines

TPI NDT Inspection Integrity checking

No. 28 Project title: 220 MW CCPP PROJECT - SKOPJE




Year

TE-TO Macedonia CONF. 100% 6 2010/2011 Scope of work APAVE’s role in the project Final assessment on pressure equipment TPI

NDT Integrity checking

No. 29 Project title: 220 MW COGENERATED COMBINED CYCLED POWER PLANT PROJECT - SKOPJE




Year





GAMA Power Systems

Macedonia CONF. 100% 24 2009 - present

Scope of work APAVE’s role in the project NDT Inspection on pressure equipment during construction of 220 MW CCPP PROJECT

NDT Inspection, MT, RT, UT, PT, VT, ET, LT

Integrity checking

No. 30 Project title: MRS ARCELOR MITTAL




Year

ARCELOR MITTAL

Macedonia CONF. 100% 3 2010

Scope of work APAVE’s role in the project Final assessment before putting into operation of substation for natural gas pipeline and gas flow meter

TPI

No. 31 Project title: FREE ECONOMIC ZONE BUNARDZIK – PIPELINE INSPECTION




Year

JOHNSON MATTHEY

Macedonia CONF. 100% 3 2010

Scope of work APAVE’s role in the project Final assessment before putting into service on a natural gas pipeline TPI

NDT Inspection, MT, RT, UT, PT, VT, ET, LT, pressure testing

No. 32 Project title: FREE ECONOMIC ZONE BUNARDZIK – PIPELINE INSPECTION




Year

KEMET Macedonia CONF. 100% 2 2012 Scope of work APAVE’s role in the project Final assessment before putting into service on a natural gas pipeline and gas flow meters

TPI NDT Inspection, MT, RT,

UT, PT, VT, ET, LT, pressure testing

No. 33 Project title: GAMA – FURNA DIME/ZDRAVJE RADOVO




Year

GAMA Macedonia CONF. 100% 3 2012 Scope of work APAVE’s role in the project Final assessment before putting into service on a natural gas pipeline TPI

NDT Inspection, MT, RT, UT, PT, VT, LT, pressure testing





No. 34 Project title: THIRD PARTY INSPECTION CHAD – CAMEROUN PIPELINE




Year

TCC Chad - Cameroun

4.900.000 $ 100% 30 2002/2004

Scope of work APAVE’s role in the project The Chad – Cameroon pipeline links DOBA in Chad to KRIBI in Cameroon. Its length is 1070 km, and its diameter is 76 cm. APAVE is in charge of all NDT testing on all secondary pipes linking oil tanks in DOBA oil field to the main pipe and on the pumping stations. APAVE’s client TCC (Chad Cameroun Construction) is part of the group HALLIBURTON – BOUYGUES – ALSTOM)

NDT testing & services on the secondary pipes & pumping stations.

No. 35 Project title: THIRD PART INSPECTION - NTD – FIELD OF MOUNDOULI - KBR




Year

KBR Chad 700.000 $ 100% 10 2005 Scope of work APAVE’s role in the project APAVE is in charge of all NDT testing on all equipment of the site of Moundouli (Field of MOUNDOULI). APAVE’s client is Kellogg Brown and Root

NDT testing & services on the secondary pipes & pumping stations.

No. 36 Project title: OHIS - CHEMICAL PLANT




Year

OHIS MACEDONIA 100.000 $ 100% 5 2009 to present

Scope of work APAVE’s role in the project Inspection on Ammonia tanks. Inspection on pressure vessels, chloride tanks.

Inspection and tests on Ammonia tanks

Inspection on pressure vessels, chloride tanks

No. 37 Project title: ALKALOID – INSPECTION ON AMMONIA TANKS




Year

ALKALOID MACEDONIA 40.000 $ 100% 5 2010 Scope of work APAVE’s role in the project Inspection on ammonia tanks. Inspection on ammonia

tanks

No. 38 Project title: NDT




Year

LYON, PETROMAR, BECHTEL

ANGOLA 6.500.000 $ 100% 65 2010-2011





Scope of work APAVE’s role in the project NDT inspection on the construction of the tanks. NDT inspection on tanks





Year

PETROMAR (SAIPEM ANGOLA)

ANGOLA 2.000.000 $ 100% 10 2006 - present

Scope of work APAVE’s role in the project NDT Inspection for SAIPEM in Angola for different projects NDT: RT, PT, MT, UT

No. 40 Project title: INSPECTION CONGO




Year

BOSCONGO (SAIPEM CONGO)

CONGO 20 years of work

Continuous assignments

10 1989 - present

Scope of work APAVE’s role in the project NDT Inspection for the projects MOHO BILONDO, LIBONDO and others

NDT : RT, PT, MT

No. 41 Project title: IN SERVICE INSPECTION




Year

ARCELOR MITTAL

MACEDONIA 48.000$ Open contract 2 2010-2011

Scope of work APAVE’s role in the project In service Inspection on Ammonia tanks. In service Inspection on

ammonia tanks

No.42 Project title: ELECTRICAL INSPECTION




Year

ENI CONGO 100.000$ 50% 1 2009 - present

Scope of work APAVE’s role in the project Verification of the electrical installations of villas and offices. Visual inspections, security

tests





Year

ENI CONGO 230.000$ Open contract 5 1989 - present

Scope of work APAVE’s role in the project





Non-destructive testing for the fields Loango, Zatchi, Kitina, Mwafi, Foukanda

NDT : RT, PT, MT, UT

No. 45 Project title: THIRD PARTY INSPECTION AND COMMISSIONING




Year

TOTAL QATAR 232.000$

100% 2 2001 - present

Scope of work APAVE’s role in the project APAVE is in charge of commissioning and starting up of electrical installation & equipment of Al Khalij field block 6

Inspection and commissioning of electrical installations and equipment, and instrumentation on site

No. 46 Project title: THIRD PARTY INSPECTION OF ONSHORE AND OFFSHORE INSTALLATIONS AND EQUIPMENT, TECHNICAL ASSISTANCE AND TRAINING




Year

TOTAL NIGERIA 45.000$ per year (average)

100% 1 to 3 1990 - present

Scope of work APAVE’s role in the project APAVE is in charge of technical inspection of onshore & offshore installations of ELF PETROLEUM NIGERIA

technical inspection (pressure vessels, steam piping, compressed air piping, lifting and handling equipment, electrical installations) technical assistance, commissioning, third party inspection and acceptance test of a housing complex for ELF personnel technical assistance (technical management) technical training FAT of miscellaneous equipment in EUROPE and USA





Year

DEZPC TOTAL SYRIA 160.000$ 100% 3 1990 - 2003

Scope of work APAVE’s role in the project Technical inspection of logistic base in DER ER-ZOR and of office buildings and apartment in DAMAS, Syria. Commissioning and third party inspection of oil treatment units, and electrical training of staff. Inspection & tests of lifting equipment

Electrical training Third party inspection, commissioning and startup of oil units Inspection of apartments





No. 47 Project title: THIRD PARTY INSPECTION AND TRAINING OF A URANIUM MINE




Year

COMINAK –COGEMA

NIGERIA 150.000 $ per year

100% 1 to 3 1980 - present

Scope of work APAVE’s role in the project APAVE is in charge of all technical inspection of Uranium mining & treatment facilities in ARLIT, NIGER. APAVE has also performed technical training & evaluation of Personnel

Inspection of electrical installations, lifting equipment, steam equipment and boilers. Technical training on electrical and lifting equipment

No. 48 Project title: THIRD PARTY INSPECTION




Year

TOTAL MYANMAR 50.000$ per year

100% 1 1997 - present

Scope of work APAVE’s role in the project Inspection of electrical equipment of TOTAL on offshore platform Inspection of electrical

installations of four platforms and power range





Year

KOTC KUWAIT 10.000 $ 100% 1 2007 Scope of work APAVE’s role in the project Inspection of electrical equipment & installations and instruments of a gas filling plant.

Inspection according to BS 7671

Infra-red survey of all switchboards & equipment

No. 50 Project title: ELECTRICAL EXPERTISE ON A GAS CARROUSEL




Year

PAM KUWAIT 6.000 $ 100% 1 2008 Scope of work APAVE’s role in the project APAVE was asked to determine the causes of a fire. Expertise after incident

No. 51 Project title: IMPROVEMENT OF ELECTRIC INSTALLATION SAFETY




Year

THE FRIENDSHIP COUNCIL

Ivory Coast, Burkina Faso, Niger, Togo and

3.500.000 $ 100% 8 Since 1982





Benin Scope of work APAVE’s role in the project The overall objective of the project is to organize a standardization structure for the realization of electric installations. For example in Ivory Coast, after the setting up of the national organism in charge of the electric installations (SECUREL) half of the electric installations have been realized in conformity with the standards and controlled (200 000 installations) by SECUREL. APAVE provides in the first years of the project the staff (4 full-time persons from 1982 to 1992) and now provides back-up missions.

In charge of the implementation of the standardization and setting up of national organism in charge of the control of electric installations. Provide technical assistance for the preparation of legislative structure, the organization and financial management of the structure and the technical training of its employees.

No. 52 Project title: INSPECTION OF ELECTRICAL INSTALLATIONS




Year

TOTAL INDONESIA 40,000 $ per year

100% 1 1982 - present

Scope of work APAVE’s role in the project Inspection of electrical equipment of TOTAL installations in INDONESIA. power ranges up to 20MVA

High voltage (20&5.5 KV A.C.)

Extra low voltage and low voltage (up to 400V A.C&D.C.)

off-shore and on-shore hazardous areas : platforms,

plants, camps, office

No. 53 Project title:

THIRD PARTY INSPECTION OF ONSHORE AND OFFSHORE INSTALLATIONS AND EQUIPMENT, TECHNICAL ASSISTANCE AND TRAINING




Year

TOTAL GABON 45.000 $ per year (average)

100% 1-3 1974 - present

Scope of work APAVE’s role in the project APAVE is in charge of technical inspection of onshore & offshore installations of ELF GABON.

technical inspection (pressure vessels, gas piping, compressed air piping, lifting and handling equipment, electrical installations) technical assistance technical training. FAT of miscellaneous equipment in EUROPE and USA.









Year

ATOCHEM - NORSK HYDRO - RHONE POULENC - SOBEGI

FRANCE 150,000 $ per year

100% 10 1980 - present

Scope of work APAVE’s role in the project APAVE is in charge of technical inspection & training in most of the chemical plants in the LACQ area, FRANCE. APAVE is also involved in technical training and environment study.

Technical inspection (pressure vessels, gas piping, compressed air piping, lifting and handling equipment, electrical installations, instruments) technical assistance NDT environment protection studies commissioning technical training





Year

TOTAL FRANCE 150.000 $ per year

100% 6 1959 - present

Scope of work APAVE’s role in the project APAVE is in charge of technical inspection & training of ELF AQUITAINE Gas Plant in LACQ, FRANCE. APAVE is also involved in technical training and environment study.

APAVE has been involved in that plant since it was put in operation in 1959.

technical inspection (pressure vessels, gas piping, compressed air piping, lifting and handling equipment, electrical installations, instruments)

technical assistance (technical management)

NDT environment protection

studies commissioning technical training FAT of miscellaneous equipment in EUROPE and USA.





No. 56 Project title: TPI




Year

ESSO FRANCE 20.000$ per year

100% 3 1997 - present

Scope of work APAVE’s role in the project Technical assistance for calculation, manufacturing and commissioning of vessels, piping, and all related equipment.

inspection of vessels, gas piping

FAT





Year

TOTAL CONGO 45.000$ per year (average)

100% 1-3 1974 - present

Scope of work APAVE’s role in the project APAVE is in charge of technical inspection of onshore & offshore installations of ELF CONGO

Technical inspection (pressure vessels, oil piping, compressed air piping, lifting and handling equipment, gas installations)

technical assistance technical training FAT of miscellaneous

equipment in EUROPE and USA

No. 58 Project title: INSPECTION OF ELECTRICAL INSTALLATIONS CLIENT Country Total Job

Value Proportion carried out by candidate


Year

TOTAL YEMEN 25.000 $ 100% 1 1999 - present

Scope of work APAVE’s role in the project Technical electrical inspection of oil treatment units, and oil wells. Technical inspection of logistic base and villas.

Inspection and design for safety of : houses of expatriate

employees, camps, oil wells and oil treatment

facilities





Year

TOTAL CAMEROON 45.000$ per 100% 1-3 1977 -





year (average) present Scope of work APAVE’s role in the project APAVE is in charge of technical inspection of onshore & offshore installations of ELF SEREPCA.

technical inspection (pressure vessels, oil and gas piping, compressed air piping, lifting and handling equipment, oil and gas installations)

technical assistance technical training. FAT of miscellaneous

equipment in EUROPE and USA.





Year

TOTAL ANGOLA 45.000$ per year (average)

100% 1-3 1985 - present

Scope of work APAVE’s role in the project APAVE is in charge of technical inspection of onshore & offshore installations of ELF ANGOLA.

technical inspection (pressure vessels, oil piping, compressed air piping, lifting and handling equipment, electrical installations)

technical assistance technical assistance during

design, commissioning and acceptance tests of administrative and apartments buildings

technical training FAT tests of miscellaneous

equipment in EUROPE and USA.

No. 61 Project title: TECHNICAL ASSISTANCE TO THE PRODUCTION AND DISTRIBUTION SECTORS




Year

PETROLEUM COMPANIES (TOTAL FINA ELF AND OTHERS)

EUROPE, AFRICA, INDONESIA

450.000$ 100% 55 Every year

Scope of work APAVE’s role in the project The consultant carries out services for oil and gas companies in France and abroad at the level of the production and distribution sectors. The main activities developed concern safety, environment management, energy constraints and oil metering. Design of data bases linked with

Technical assistance, inspection, studies and training.





operational aspects was also performed.




Year

TOTAL BOLIVIA 45.000 $ 100% 1 2000 Scope of work APAVE’s role in the project Housing complex for TOTAL Employees expatriates. The aim of our services was to make sure that all TOTAL technical requirements were met, (safety, technical performances, quality of equipment, legal requirements).

inspection and design for safety of the houses of expatriate employees

No. 63 Project title: TRAINING PROGRAMME FOR PERSONNEL TESTING LABORATORIES OPERATING IN RELATION WITH PRESSURE EQUIPMENT DIRECTIVES




Year

CEN-TCU EUROPEAN STANDARDS COMMITTEE

10 CEC COUNTRIES

100.000 $ 100% 7 May to July 2008

Scope of work APAVE’s role in the project Project carried out on behalf of PRAQ III program (Third Program on Quality Assurance) to provide technical assistance to 10 CEC's. The aim of this training program was to promote the use of the testing methods described in the European Standards referred in the Directive 97/23/EC related to pressure equipment and in the Directive 87/404/EEC related to simple pressure vessels.

Organization of 3 training sessions for 10 participants selected among the national inspection bodies of 10 Central European countries. 5 days sessions lectured by 1 Project Director, 4 Lecturers Experts in NDT, and 2 Administrative Staff.

Training in the application of NDT Techniques (Ultrasonic testing, eddy current, radiography, liquid penetrant, magnetic particles):

Preparation of the program and validation with the experts of the CEN

Selection of participants in the beneficiary states (Bulgaria, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia, Slovenia)

Organization of travels and logistical arrangements

Implementation of the sessions

Reporting




Year

TOTAL VENEZUELA 45.000 $ 100% 1 2009 Scope of work APAVE’s role in the project





Housing complex for TOTAL Employees expatriates. The aim of our services was to make sure that all TOTAL technical requirements were met, (safety, technical performances, quality of equipment, legal requirements).

inspection and design for safety of housing of expatriate employees

No. 65 Project title: THIRD PARTY INSPECTION AND ACCEPTANCE TESTS OF ELECTRICAL INSTALLATIONS AND EQUIPMENT




Year

TOTAL ROMANIA, KHASAHSTAN

20.000 $ 100% 2 2010

Scope of work APAVE’s role in the project Inspection of rigs before operation third party inspection and

acceptance test of rigs

No. 66 Project title: RELIABILITY OF ELECTRICAL INSTALLATION CLIENT Country Total Job



Year

MATRA EGYPT 45.000 $ 100% 1 2006 Scope of work APAVE’s role in the project Assistance technique for MATRA facilities in EGYPT Study of reliability of a

satellite ground guidance station electrical installation

No. 67 Project title: THIRD PARTY INSPECTION AND COMMISSIONING CLIENT Country Total Job



Year

TOTAL UK 40.000 $ 100% 1 2009 Scope of work APAVE’s role in the project APAVE was in charge of commissioning and starting up of electrical installation & equipment of offshore installations.

Third party inspection and commissioning of electrical and instrument installations on offshore platforms

FAT of equipment in EU & USA

No. 68 Project title: THIRD PARTY INSPECTION AND TRAINING CLIENT Country Total Job



Year

GASCO U.A.E 40.000 $ 100% 1 2010 Scope of work APAVE’s role in the project Inspection performed on GASCO plants in RUWAIS and ASAB. Inspection of electrical

installations and equipment Electrical training

No. 69 Project title: THIRD PARTY INSPECTION OF ALL TECHNICAL INSTALLATIONS OF APARTMENT BUILDINGS & VILLAS




Year

TOTAL INDIA 100.000 $ 100% 2 2011 Scope of work APAVE’s role in the project





Employees expatriates in BOMBAY, INDIA. The aim of our services was to make sure that all TOTAL technical requirements were met, (safety, technical performances, quality of equipment, legal requirements).

Technical assistance during the design phase of the project, third party inspection, acceptance tests and commissioning for the following equipment : Electrical installations Fire-fighting system Lifts

No. 70 Project title: TECHNICAL AUDITS CLIENT Country Total Job



Year

SEREPT TUNISIA 15.000 $ 100% 2 2011 Scope of work APAVE’s role in the project ASHTART offshore platform, SFAX, TUNISIA. APAVE was in charge of technical audits after some troubles on equipment.

Audit of electrical system and installations

Audit of structure & lifting equipment

No. 71 Project title: NDT - FIELD OF KOME




Year

EXXON MOBIL

CHAD

2.500.000 $ 100% 10 2007/2010

Scope of work APAVE’s role in the project APAVE is in charge of all NDT tests on all secondary pipes linking oil tanks in DOBA oil field to the main pipe and on the pumping stations. Site of KOME. APAVE’s client is EXXON MOBIL

NDT tests & services on the secondary pipes & pumping stations.

No. 72 Project title: LIFTING INSPECTION & TRAINING – FIELD OF KOME




Year

EXXON MOBIL CHAD

60.000 $ per year

100% 1 2004-2006

Scope of work APAVE’s role in the project APAVE is in charge of all lifting inspection of the equipment of the site of KOME APAVE also organize several training in lifting.

Training in lifting (about 80 persons) Lifting inspection (all the lifting equipment of the site)

No. 73 Project title: STRUCTURAL AND METALLIC INSPECTION – SOGARA




Year

SOGARA GABON 130.000 $ 100% 2 2010 Scope of work APAVE’s role in the project APAVE is in charge of a study for determining the level of conformity of Study and inspection of the





the refinery of PORT GENTIL (Metallic Structure study). structure of the totality of the site of Port Gentil. NDT inspection.

No. 74 Project title: NDT AND LIFTING – TOTAL GABON




Year

TOTAL GABON 700.000 $ 100% 10 2010 Scope of work APAVE’s role in the project APAVE is in charge of all NDT tests (PT/MT, Eddy Current, IRIS…) on all equipment of the sites of PORT GENTIL on shore and off shore. Apave is also in charge of all the inspection of the totality of the lifting equipment (Port Gentil – Offshore: Grondin, Anguille, Torpille – and on shore: cap Lopez, Industrial base Port Gentil)

Lifting inspection of all the lifting equipment of TOTAL GABON off shore and on shore (Cranes, forklift, shackles, basket…) NDT inspection for all the sites of PORT GENTIL

No. 75 Project title: NDT – MAINTENANCE DEPARTMENT




Year

EXXON MOBIL Equatorial Guinea

620.000 $ 100% 4 2011

Scope of work APAVE’s role in the project APAVE is in charge of all NDT inspections in Malabo, on shore and offshore. Various sites include Malabo welding contractors, FPSO Zafiro Producer and Jade Platform, Luba Oil Center etc. APAVE’s client is EXXON MOBIL

NDT inspections on oil and gas pipelines





Year

MARATHON OIL

Equatorial Guinea

360.000 $ 100% 4 2011

Scope of work APAVE’s role in the project APAVE is in charge of all NDT inspections in Malabo, on shore and offshore. Various sites include Malabo welding contractors, Punta Europe Marathon base, Alba offshore platforms etc. APAVE’s client is MARATHON OIL

NDT inspections on oil and gas pipelines





Year

AMPCO (LNG Plant)

Equatorial Guinea

140.000 $ 100% 6 2011

Scope of work APAVE’s role in the project





APAVE is in charge of all NDT inspections in Malabo during the shutdown project. Performing Eddy Current and UT inspection during the Methanol Plant shutdown on various exchangers, coolers, trim coolers. Performing IRIS and RFT/NFT on the various tubes. APAVE’s client is AMPCO (LNG Plant partially owned by Marathon, Nobel Energy and the EG Government

NDT Inspections and QAQC assistance on LNG installations.

ET IRIS RFT





Year

TOTAL EG Equatorial Guinea

40.000 $ 100% 4 2010/2011

Scope of work APAVE’s role in the project APAVE is in charge of all NDT inspections and downstream in Malabo and in Bata for the tanks and piping. APAVE’s client is TOTAL EG.

NDT Inspections and QAQC assistance.

No. 79 Project title: TOTAL ABU AL BUKHOOSH




Year

TOTAL ABK U.A.E

Variable 100% 1 1980 to present

Scope of work APAVE’s role in the project Inspection of electrical equipment of TOTAL ABK offshore platform. inspection of electrical

installations

No. 80 Project title: ELECTRICAL TRAINING




Year

ZADCO U.A.E

15 to 30.000$ per year

100% 1-2 1990 to present

Scope of work APAVE’s role in the project Technical training on ZIRKU ISLAND and ZAKUM CENTRAL COMPLEX. Electrical protective

relays training, and electrical safety training for electrical and non-electrical personnel

Certification of personnel





Year

TOTCO (Chad) and COTCO (Cameroon)

CHAD and Cameroon

94.000 $ 100% 6 2007





Scope of work APAVE’s role in the project Corrosion inspection of 4 sites in Chad and Cameroon of the pipe-line Chad-Cameroon. COTCO and TOTCO are subsidiaries of EXXON MOBIL. The 8 anomalies were been identified by intelligent pig. Same anomalies were confirmed by TOFD technique. APAVE used TOFD techniques with others techniques : classic UT, MPI and Eddy current

General visual inspection of anomalies as per the exposed pipeline inspection procedure. A total number of 8 anomalies site will be excavated for inspection. Measurement of remaining wall thickness at the internal corrosion (01 site) using automatic ultrasonic thickness gauging method (site located in Chad, 27.2 km from Pump Station1) Measurement of remaining wall thickness at 03 metal loss sites not related to corrosion. (sites located between Pump Station 3 (Belabo) and Pressure Reduction Station - Kribi) Measurement of depth and size of external corrosion anomalies using pit gauge and precision ruler . (02 sites located 2 m from each other , between Pump Station 3 (Belabo) and Pressure Reduction Station (Kribi) Measurement of gap and length of 03 mechanical anomalies /dents using depth gauge and a precision ruler. (sites located between Pump Station 3 (Belabo) and Pressure Reduction Station (Kribi) Technical support to inspection activities.

No. 82 Project title: PRESSURE VESSELS INSPECTION OF A GPL TANK SPHERE




Year

TOTAL OUTRE MER

GABON 58.600 $ 100% 3 2008

Scope of work APAVE’s role in the project Inspection of a GPL tank sphere for TOTAL OUTRE MER. Owner of the sphere : SGEEP (Libreville) – 6000 m3

Hydraulic test Dye penetrant testing Testing of the bases Ultrasonic testing

(cartography of the sphere)





No. 83 Project title: PRESSURE VESSELS INSPECTION OF A GPL TANK SPHERE




Year

FRIEDLANDER BURKINA FASO

58.600 $ 100% 3 2007

Scope of work APAVE’s role in the project Inspection of a GPL tank sphere for FRIEDLANDER / ORTEC in Burkina Faso. Owner of the sphere : SONABHY – 4500 m3

Hydraulic test Dye penetrant testing Testing of the bases Ultrasonic testing

(cartography of the sphere) Calibration of the sphere NDT inspection

No. 84 Project title: INSPECTION CHAD / CAMEROON GAS PIPE LINE




Year

COTCO CAMEROON 150.000 $ / year

100% 12 2008

Scope of work APAVE’s role in the project NDT Inspection of the Chad / Cameroon gas pipe line Inspection of all the PSV of the compression stations

NDT : RT, PT, MT, UT PSV inspection

No. 85 Project title: LIFTING, TUBULAR & PRESSURE TESTING




Year

HALIBURTON ANGOLA 1.100.000 $ 100 % 6 2012 Scope of work APAVE’s role in the project Tubular, lifting and pressure testing Tubular, lifting and

pressure testing

No. 86 Project title: LIFTING, TUBULAR & PRESSURE TESTING




Year

SCHLUMBERGER ANGOLA 1.100.000 $ 100 % 6 2011 Scope of work APAVE’s role in the project Tubular, lifting and pressure testing Tubular, lifting and

pressure testing

No. 87 Project title: PSV/PRV & Lifting Inspection




Year

EXPRO GHANA 140.000 $ 100 % 1 2011-2012

Scope of work APAVE’s role in the project PSV/ PRV & Lifting Inspection PSV/ PRV & Lifting

Inspection





No. 88 Project title: LIFTING & TUBULAR INSPECTION




Year

KOSMOS GHANA 1.200.000 $ per year

100 % 10 2010 to present

Scope of work APAVE’s role in the project Lifting and tubular inspection Lifting and tubular

inspection

No. 89 Project title: LIFTING & TUBULAR INSPECTION




Year

CHEVRON GHANA 1.200.000 $ per year

100 % 10 2010 to present

Scope of work APAVE’s role in the project Lifting and tubular inspection Lifting and tubular

inspection

No. 90 Project title: PSV/PRV & Lifting Inspection




Year

BAKER HUGHES

GHANA 140.000 $ 100 % 1 2011-2012

Scope of work APAVE’s role in the project PSV/ PRV & Lifting Inspection PSV/ PRV & Lifting

Inspection

No. 91 Project title: UT/TOFD and Phased Array Inspection




Year

EXXONMOBIL CHAD-CAMEROON

CONFID % 2013

Scope of work APAVE’s role in the project Chad-Cameroon Pipeline UT/TOFD and

Phased Array inspection on all points (indications) from the intelligent pigging survey

No. 92 Project title: Pressure Vessels Piping Phased Array Inspection




Year

EXXONMOBIL CHAD CONFID 100 % 2013 Scope of work APAVE’s role in the project Pressure Vessels, Piping, Phased Array Inspections Pressure Vessels





Piping Phased Array

Inspection

No. 93 Project title: Manual PA and TOFD Inspection




Year

EXXONMOBIL RUSSIA 270.000 $ 100 % 4 2013 Scope of work APAVE’s role in the project Manual PA and TOFD in Sakhalin 1-5 sites Manual PA and

TOFD Automatic

UT(corrosion scanning)

No. 94 Project title: Various Advance NDT




Year

EXXONMOBIL EQUATORILA GUINEA

CONFID 100% 2013

Scope of work APAVE’s role in the project Various Advance NDT Inspections on Jade Platform and FPSO ZP TOFD

PA Hydroform RMS

No. 95 Project title: Phased Array and TOFD Inspections




Year

HELLENIC PETROLEUM –OKTA REFINERY

MACEDONIA CONFID 100 % 5 2013

Scope of work APAVE’s role in the project Phased Array and TOFD on pipeline Thessaloniki to Skopje in OKTA Refinery

Phased Array TOFD

No. 96 Project title: Phased Array and TOFD Inspection




Year

LNG ANGOLA CONFID 100 % 2013 Scope of work APAVE’s role in the project New construction of LNG Plant Phased Array and

TOFD on cryogenic tanks new construction





No. 97 Project title: TOFD Inspection




Year

ENQUEST NORTH SEA

UK CONFID 100 % 2013

Scope of work APAVE’s role in the project Thistle Platform TOFD Inspections

offshore

No. 98 Project title: Tank Farm Inspection and Calibration/Dimensional Certification




Year

TOTAL CONGO 450.000 $ 100 % / 1994-2004-2014 (each 10 years)

Scope of work APAVE’s role in the project Tank Farm Inspection and Calibration/Dimensional Certification

Tank Farm Inspection and Calibration/Dimensional Certification





Year

TOTAL CAP LOPEZ DEPOT, GABON

380.000 $ 100 % / 2003/2009/2013

Scope of work APAVE’s role in the project Tank Farm Inspection and Calibration/Dimensional Certification Tank Farm Inspection

and Calibration/Dimensional Certification





Year

GE PETROL EQUATORIAL GUINEA

880.000 $ 100 % / 2014

Scope of work APAVE’s role in the project Tank Farm Inspection and Calibration/Dimensional Certification Tank Farm

Inspection and Calibration/Dimensi





onal Certification

No. 101

Project title:

Various Tank construction, refurbishment NDT Inspections and Calibration/Dimensional Certification




Year

TOTAL GE BATA

MALABO AIRPORT, EG

490.000 $ 100 % / 2002/2008/2009/2010/2014

Scope of work APAVE’s role in the project Various Tank construction, refurbishment NDT Inspections and Calibration/Dimensional Certification

Various Tank construction, refurbishment NDT Inspections and Calibration/Dimensional Certification

No. 102 Project title: Various Tank construction, refurbishment NDT Inspections and Calibration/Dimensional




Year

HELLENIC PETROLEUM – OKTA REFINERY

MACEDONIA 270.000 $ 100 % 9 SEPT-OCT, 2013

Scope of work APAVE’s role in the project Various Tank construction, refurbishment NDT Inspections and Calibration/Dimensional

Various Tank construction, refurbishment NDT Inspections and Calibration/Dimensional

No. 103 Project title: Tank Farm Construction Inspection, Calibration/Dim Cert




Year

PORTO ROMANO

ALBANIA 160.000 $ 100 % / JUNE, 2013 - FEBRUARY, 2014

Scope of work APAVE’s role in the project Tank Farm Construction Inspection, Calibration/Dim Cert Tank Farm

Construction Inspection, Calibration/Dim Cert

No. 104 Project title: Tank-Inspection








Year

EXXONMOBIL KOME 5

CHAD 180.000 $ 100 % / 2013

Scope of work APAVE’s role in the project Inspection on tanks. FLOOR MAP inspection on the floor plates and UT thickness measurements on the floor plates and annual plates

MFL (FLOOR MAP) UT measurements

No. 105 Project title: Tank-Inspection




Year

EXXON NAFTEGAS LIMITED

Sakhalin; RUSSIA

220.000 $ 100 % / 2014

Scope of work APAVE’s role in the project Floor Map inspection and AE(Acoustic Eye) inspection on oil tank. FLOOR MAP

AE

No. 106 Project title: Tank Inspection




Year

TOTAL E&P Terminal Djeno

CONGO 250.000 $ 100 % / 2013

Scope of work APAVE’s role in the project MFL FLOOR MAP Inspection on oil storage tank RB5. FLOOR MAP

inspection on the floor plates and UT thickness measurements on the

floor plates and annular plates.

MFL(FLOOR MAP) UT thickness

measurements

No. 107 Project title: Inspection on oil storage tank




Year

AMPCO EQUATORIAL GUINEA

300.000 $ 100 % / 2013

Scope of work APAVE’s role in the project MFL FLOOR MAP Inspection on oil storage tank RB5. FLOOR MAP

inspection on the floor plates and UT thickness measurements on the

floor plates and annular plates.

MFL(FLOOR MAP) UT thickness

measurements





No. 108 Project title: IRIS Inspection




Year

DUNG QUAT VIETNAM 110.000 $ 100 % / 2011 Scope of work APAVE’s role in the project Major Turn Around IRIS inspection on Heat Exchangers and HELAS

calculations

IRIS inspection

No. 109 Project title: Eddy Current Inspection on Heat Exchangers




Year

TRANSOCEAN CONGO 145.000 $ 100 % / 2014 Scope of work APAVE’s role in the project Eddy Current Inspection (ET) on heat exchangers, lifting gears,

monorails and pad eyes.

ET UT thickness

measurements VT

No. 110 Project title: UT and ET Inspection on heat exchangers




Year

EG LNG EQUATORIAL GUINEA

190.000 $ 100 % / 2014

Scope of work APAVE’s role in the project UT, Eddy Current and AE inspection on trim coolers, heaters, heat

exchangers. VT on heat exchangers, using video endoscope

ET inspection VT inspection UT inspection AE inspection

No. 111 Project title: Inspection on tanks using advance NDT methods




Year

SHELL GABON 157.000 $ 100 % / 2012 Scope of work APAVE’s role in the project RMS Inspection on tanks shell, MFL Floormap VS 2i on tank, RMS on 24

inch pipeline, UT thickness and AE on tank bottom plates and VT on tank

shell and bottom plates

RMS MFL Floormap UT VT





No. 112 Project title: Inspection on tanks using advance NDT methods




Year

MARATHON EQUATORIAL GUINEA

$ 100 % / 2012

Scope of work APAVE’s role in the project Shutdown project, Performing IRIS, NFT and RFT Tubes Inspection,

inspection on heat exchangers, coolers and finfans

IRIS NFT RFT

No. 113 Project title: Shutdown project-Inspection services




Year

QAPCO QATAR Confidential 100 % 10 February-April 2014

Scope of work APAVE’s role in the project Inspection Services for periodic complete inspection and re-proof

pressure test of medion, high pressure and low pressure equipment,

during the General Shutdown of 2014

Various NDT Inspection

No. 114 Project title: Inspection services




Year

HESS Equatorial Guinea

Confidential 100 % 4 2011-2012

Scope of work APAVE’s role in the project NDT Inspection on FPSO Sendje Ceiba and Okume Complex.

Top sides GVI and CVI inspection on main deck primary structure, Hull

external above water CVI and Drop cell inspection CP.

Performing UT, ECI, GVI, CVI on lifting equipment using Rope Access

method

Various NDT Inspection using Rope Access method





Year





ExxonMobil Equatorial Guinea

Confidential 100 % 4 2012 -2014

Scope of work APAVE’s role in the project Periodic NDT inspection on FPU ZP and JADE Platform.

Performing ET and UT inspection on bottom tank welds. Performing RT,

PT, ET, MT and UT thickness measurements on piping and structural

welds, in service on different projects on the construction side.






Year

TOTAL Congo Confidential 100 % 4 2011-2013

Scope of work APAVE’s role in the project Periodic NDT inspection on FPSO NKP, YAFP, YANGA, YAQ and DJENO

Platform.

NDT Tank inspection, Repairs to the holes in the roof of the tanks using

rope access techniques. Replacement of spray nozzles on the fire

suppression system.

NDT Piping inspection using MT, PT, UT, RT and ET technique. GVI/CVI

inspection on bracings.






Year

SBM Equatorial Guinea

Confidential 100 % 12 2011 - 2014

Scope of work APAVE’s role in the project FPSO Serpentina - Pull in chains replacement campaign – replacing pull

in chains attached on anchor legs on turret. Performing oxy-acetylene

cutting, rigging and lifting.

Piping corrosion survey performing UTM and CVI on selected futures in

Process area and Pump Room pipelines

Periodic NDT inspections on tanks according to ABS.

Rigging project and NDT inspection using Rope Access method





Year


Confidential 100 % 3 2011 - 2014





Scope of work APAVE’s role in the project Annual In‐Service Inspection of Exxon Mobil's Zafiro Producer FPU as

part of the ABS approved Risk Based Inspection (RBI) plan.

Performing NDT ( UT & GVI/CVI) inspection on various pipelines with

Rope Access techniques.

Drilling Rig inspections with ECI and MPI, Dropped Object Survey and

Cable Installation on Derrick.

RBI project using Rope Access method





Year


Confidential 100 % 3 2011 - 2014

Scope of work APAVE’s role in the project JADE Platform - Performing NDT ( UT & GVI/CVI) inspection on various

pipelines with Rope Access techniques. Performing UT corrosion surveys

with UT scanning method. UT Thickness gauging of Stbd. Lifeboat Deck

as requested by ABS;

Develop the database for the RBI software.

RBI project using Rope Access method





Year


Confidential 100 % 3 2012 - 2014

Scope of work APAVE’s role in the project Periodical DNV Hull class inspection project. Performing UT, MPI and

CVI/GVI with Rope Access techniques.

Profile radiography on process piping.

Hull inspection project using Rope Access method





Year

TOTAL Congo Confidential 100 % 3 2012 - 2013

Scope of work APAVE’s role in the project Periodical NDT inspection on YAQ & YAFP Platforms SEFP

Wharf inspection, Tank inspection and Rigging project.

Telecommunication tower mast maintenance. Undertaking re-alignment

of electrical cables and securing them in the correct positioning using

Periodic NDT Inspection using Rope Access method.





stainless steel cable ties.

NDT inspection on offshore satellites flares, ET and MT crane inspection.

ET inspection on boat landing. UT and CVI/GVI inspection on crude oil

storage tanks.

Visual inspection on pipes and100 meters Antenna Mast for ENI.





Year


Confidential 100 % 4 2013 - 2014

Scope of work APAVE’s role in the project FPU ZP - Riser inspection and repair campaign on previous Apave

inspections. Performing Visual inspection to locate breaches in outer

riser sheath, removing a patch form outer riser sheath and performing

DPI and CVI on armor layer. Installation of Inconel / Stainless steel

clamp, pressure and vacuum test for testing repair. Performing Plastic

Welding repair with inter gas on riser outer sheath

Periodic NDT Inspection using Rope Access method.





Year


Confidential 100 % 4 2013 - 2014

Scope of work APAVE’s role in the project Okume Complex - Structural Integrity Inspections on Tension Leg

Platforms ECHO and FOX and Fixed Platform Charlie;

Inspection project UTM, ECI and CVI with Rope Access Techniques Eddy

Current Inspection (ECI) and Close Visual Inspection (CVI) of welded

connection of selected helideck support structure foundations, Flare

tower foundations, Selected module support stools, Riser hang-off

platform, Mooring chain fairleads;

Cathodic protection Drop cell inspection and top sides inspection on

Alpha, Bravo, Delta and Charlie fixed platforms.

Periodic NDT Inspection using Rope Access method. Structural Integrity Inspections.





Year

CNR Gabon Confidential 100 % 4 2012 Scope of work APAVE’s role in the project





Structural and Integrity survey. GVI and CVI on the jacket, topside

supports, deck members, passive fire protection, cranes, modules, risers,

conductors, open and closed drain system, access & escape systems

Structural and Integrity survey using Rope Access method.





Year

Marathon Oil Equatorial Guinea

Confidential 100 % 4 2013 - 2014

Scope of work APAVE’s role in the project NDT inspection and Structural integrity inspection on 4, 100m Mast

communication towers. Dropped objects survey of the Derrick/Mast and

agreed surrounding areas, documenting findings with photographic

support and providing recommendations for their rectification. Rigging

and changing block on crane hook using Rope Access method.

Structural and Integrity survey, NDT inspection and rigging project using Rope Access method.





Year

PERENCO Gabon Confidential 100 % 4 2012 Scope of work APAVE’s role in the project MOPU Tchatamba – Visual assessment and structural inspection Rope

Access survey. Structural discontinuities assessment of hull structure of

Mopu, 3D modeling with final Solid Works solution, repairing plan, UT

thickness measurements and MPI inspection

Structural and Integrity survey and NDT inspection using Rope Access method.





Year

OKTA Macedonia Confidential 100 % 3 2011-2014

Scope of work APAVE’s role in the project Periodic NDT Inspection including CVI/GVI, MPI, Hardness testing and

UT Thickness measurement on steam boilers and pipeline welds.

NDT inspection using Rope Access method.





Year

NOBEL Equatorial Confidential 100 % 3 2011-





ENERGY Guinea 2014 Scope of work APAVE’s role in the project Periodic NDT Inspection

Tank inspection and rigging projects. Load test on Lifting equipment

(man ringing winch, sheave pad eye & diving cages) with use of rope

access techniques






Year

Exxon Naftegas Limited

Russian federation

Confidential 100 % 3 2013-2014

Scope of work Technicome and APAVE’s role in the project

Periodic NDT Inspection Offshore facility ORLAN and OPF Chayvo.

Performing Corrosion Mapping using the HydroFORM system on Crude

Oil flowline and bypass line; Performing Magnetic Flux Leakage

Corrosion Mapping using the FloorMapVS2i system on Produced Water

Tank Bottom;

Performing corrosion mapping with RMS (Rapid Motion Scanner) on the

vessel - “Vent Scrubber” ;

Performing Phased Array inspection with Hydro form on choke valves

and pipeline welds.

Floor map inspection on oil tanks

Corrosion Mapping, Performing features verification previously found

with ILI pigging, utilizing Hydro form PAUT equipment and Omni scan

MX1/MX2 unit. Phased array weld inspection: in-service inspection and

integrity assessment of flow line welds at Orlan platform part of Sakhalin

1 project. Inspection was carried out utilizing Omni scan MX2 unit in

combination with Olympus Compact probe holder and Phoenix C-Clamp

probe holder due different weld access. A lot of PAUT and TOFD

inspections done on process piping or 3 offshore and 2 onshore sites

during constructions and repair phases in lieu of Radiography.






Year

ExxonMobil, Kome 5,

Chad Confidential 100 % 4 2013





Scope of work APAVE’s role in the project HOT TAP inspections (VT, MT, UT, RT) and UT Corrosion Survey of

pipelines and storage tanks in the plant.

APAVE crew responsible for supervising and preparing the quality packs

for the project and various contractors (painting, hydro tests, welding).

NDT inspection





Year

TOTAL Angola Confidential 100 % 4 2013 Scope of work APAVE’s role in the project TOTAL, Luanda, Angola – FPSO GIRASSOL, FPSO DALIA Performing UT

wall thickness measurement on tanks, pipes and pressure vessels as

defined by the RBI program of TOTAL – Performing also data collection,

data entry and maintaining all into their database.

NDT inspection





Year

EG LNG Equatorial Guinea

Confidential 100 % 3 2011

Scope of work APAVE’s role in the project RBI zero points, Preparing ISO drawings and inspection plans. Data

collection and data entry of inspection points and results in the RBI

software.

Duties involving lifting Equipment and Gear Inspection and Certification.

Doing an initial inspection and follow up as required by the standards

and clients practices (Every 6 months for loose lifting accessories and

annually for Cranes). Starting the new lifting register for all the

equipment and gear into the database.

General Welding Engineering, Mechanical Integrity and NDT Inspection.

APAVE crew working on the various documentation packs, inspection

procedures and qualifications of them. Preparing the documents for the

EG LNG shutdown, helping the inspection department manager in

various QAQC tasks pre-shutdown, during shutdown and post shutdown.

Inspection during fabrication of pressure vessels, process piping and

pipelines according to ASME requirements. Once the commissioning was

done, the team was part of the RBI group that set up the system defined

NDT inspection





the zero readings. Apave has 11 people working on the RBI side and

periodically returning to EG LNG to perform In service inspections.





Year

Angola LNG Angola Confidential 100 % 3 2013 Scope of work APAVE’s role in the project RBI zero points, Preparing ISO drawings and inspection plans. Data

collection and data entry of inspection points and results in the RBI

software.

Duties involving lifting Equipment and Gear Inspection and Certification.

Doing an initial inspection and follow up as required by the standards

and clients practices (Every 6 months for loose lifting accessories and

annually for Cranes). Starting the new lifting register for all the

equipment and gear into the database.

General Welding Engineering, Mechanical Integrity and NDT Inspection.

APAVE crew working on the various documentation packs, inspection

procedures and qualifications of them. Preparing the documents for the

EG LNG shutdown, helping the inspection department manager in

various QAQC tasks pre-shutdown, during shutdown and post shutdown.

Inspection during fabrication of pressure vessels, process piping and

pipelines according to ASME requirements. Once the commissioning was

done, the team was part of the RBI group that set up the system defined

the zero readings. Apave has 11 people working on the RBI side and

periodically returning to EG LNG to perform In service inspections.

NDT inspection





Year

CNR Gabon Confidential 100 % 3 2013 Scope of work APAVE’s role in the project CNR, Port Gentil, Gabon - Platform Knock Allan - APAVE crew

preparing the work packs for the Inspection crews that were

performing manual UT inspection for thickness measurements

and corrosion checking on pipes and vessels. Performing Internal

NDT inspection using Rope Access technique





VT inspection and MT inspection for surface cracks, using Rope

Access technique on places difficult to reach.





Year


Confidential 100 % 6 2011

Scope of work APAVE’s role in the project APAVE crew working with Lloyds Register team to do UT,

Corrosion Digital RT and LRUT (for CUI) followed by inserting the

data into the RBI Software. Full management of the upgrade of the

platform (Compressor, Gas Separator, various piping, living

quarters, bridge construction, deconstruction of several

elements). APAVE crew of 6 with several responsibilities in the

construction field (painting, welding, and inspection). Applying

US construction codes for these projects. Following them from the

design phase (review, approval) to the construction and finally to

the commissioning phase.

RBI Project





Year

SBM Equatorial Guinea Confidential 100 % 2 2013 Scope of work APAVE’s role in the project FPSO Serpentina – UT thickness measurements using the Scorpion

from Silverwing on selected piping and preparing remaining life

assessment on the RBI corrosion monitoring software;

RBI Project





Year

AMPCO Equatorial Guinea Confidential 100 % 3 2011 Scope of work APAVE’s role in the project





Methanol plant Expansion project (RT and UT in prefab and tie in

welds). Keeping track of the welding maps and welding plans.

Creating software to follow up the QA/QC for the project welding

and various NDT, Hydrotests, Heat Treatment and other required

processes.

NDT Inspection and QAQC services





Year

EG LNG Equatorial Guinea Confidential 100 % 6 2011 Scope of work APAVE’s role in the project APAVE crew performing UT, MT, PT on various structures and

piping. Using the visions software to input inspection reports;

Provide commissioning team for the newly built LNG Plant in

Equatorial Guinea. Team` general duties with EG LNG were

baseline inspection of vessels, coolers/exchangers, heaters, LNG

storage tanks and piping. Create all corrosion loops and

inspection plans.

NDT inspection services





Year

EXXON MOBIL Equatorial Guinea

Confidential 100 % 3 2011 - 2014

Scope of work APAVE’s role in the project Abayak, Malabo - APAVE crew monitoring RBI (Risk Based

Inspection) projects, DRT and UT inspections for thickness

monitoring. Corrosion monitoring on vessels, tanks and pipe lines.

Visual Inspection on various tanks, vessels, piping and CUI

(Corrosion under Insulation). Personnel working on Meridium

Software, organizing piping according to corrosion circuits, FIMS,

Risk etc. Inputting UT and VT Inspections, creating TML`s and

analyzing settings in Meridium. Corrosion Coupons program -

Installing, Removing and Monitoring Corrosion Coupons of

Storage Tanks, Controlling and Analyzing the gain values and

corrosion rate. Leading Cathodic protection survey programs on

RBI Project





hull structures, platform leg members and tanks.

Corrosion Support, performing various inspection as DRT, UT and

VT, cathodic protection (drop survey), gas monitoring readings,

replacing corrosion coupons on tanks. Organizing corrosion

inspection for pipelines and vessel, operating in Meridium

Software (Fixed Equipment Inspection, RBI, TML monitoring etc.)





Year

Marathon Oil Equatorial Guinea

Confidential 100 % 5 2011 - 2014

Scope of work APAVE’s role in the project Calculating the MAWT (minimum allowable wall thickness),

corrosion allowable and remaining life for pressure vessels

according to API standards.

Inspection on pressure vessels, heat exchangers and fin fan

coolers according to API 510.

Performing inspection on piping systems onshore and offshore

according to API 570.

Personnel supervising pressure vessels repairs; carry out

calculations and assessments for pressure vessels re-rate; Carry

out fitness-for-purpose assessments for piping systems and

pressure vessels.

Providing pre-planning and planning team during shutdown.

Work with SAP software for plant maintenance, material control

and cost control.

Inspection and maintenance services


major projects reference list - · pdf filegeocean libya syrthe libya pipeline project 27....

Documents