management ideas products suppressionone aqualock optoniks amazing led m and m imagine seven items...

1

Management Ideas Products

• SuppressionOne• AquaLock• Optoniks• Amazing LED• M AND M

Imagine seven items under one roof which the world has never seen. Products that are so fantastic we have to make them and incorporate them into everyday use. All products that can benefit mankind.

Seven Unique Concepts that do not exist in the world today.

Seven Concepts that all can be made into a revenue generating retail products.

Seven Products that have been patented or patents pending.

Seven products that applications have world wide purpose and uses.Seven products currently in different phases of construction and demonstration models.

All that is left is taking the products and ideas to final retail production.

We need help to finish and are ready to share and reward those who help us.

New Tech Investment Partners

Any QuestionsPlease Contact:

Mark [email protected]

Majid Babaie, PE [email protected]

2

Our Product More Than A Vision

Suppression OneA device to automatically extinguish a fire

Our Fire SuppressorPicture a smoke detector size device only slightly larger. Affix it to the ceiling to protect a room 14x14 feet in size. Battery operated, designed to stand alone or integrated into a home automation system.If it detects a fire it will activate and spray out our patented chemical mist, which will raises the flashpoint of the fire. The fire unable to ignite is extinguished in 3 seconds with a nontoxic, biodegradable mist. An audible alert will be emitted and if part of a home automation system the alert will go out to a cell phone or central station. We can flat out put out a fire.No loss of life, no major property damage from a fire. No water damage from a sprinkler system or fire department.

Applications are endless, with sales beyond millions of units. Designed with a capability to stop any type fire seconds after it ignites. It can be part of monitored by all manufactured home automation systems, Yet programmed and installed by the homeowner. Think Nest thermostats but it stops fires. All consumers and insurance companies will love us. A unique product with revenue potential that is unlimited.

FireTKO

3

AquaLock

Purpose Of Device The AquaLock is designed to prevent water damage associated with frozen, broken pipes, supply lines or malfunctions of any appliance that uses water. It also takes into account human error, and can protect an overflowing sink or bathtub. With a dual role AquaLock also serves as a water manager and conservator of water resources.

How It WorksUsing a patented manifold we can detect unauthorized water flow, as little as a teaspoon of water. It can detect freezing conditions and has back-up batteries when power goes out. We use wireless transmissions for permission to allow authorized water flow to sinks and appliances. It can all be connected to any home automation system for monitoring or used stand alone.

A Device To Prevent Water Damage

Home owners, vacation properties and insurance companies will welcome the protection for this form of property damage

4

Amazing LED

Our unique driver design for the LED lighting would extend the product life time by ten-fold over existing lighting.

We in fact have LED replacements that would truly last 20 years if left continually on.

The beauty of this would only add $1.00 to the manufacturing costs making our lights a super value for all florescent, industrial lighting and conventional bulbs, saving on materials and labor to replace.

We plan on employing disabled veterans via a six week training program. They can assemble product in their homes or small assembly areas. It is good for them plus a cost effective as the lights are assembled in a proven cottage industry fashion. Once finished, the end product would be sent to our warehouse for final quality checks and distribution. Sales potential is unlimited even in the crowded lighting market. Savings on electricity, replacements and labor would be significant and make our product the lighting for smart buyers.

A lighting company with a brighter product

5

OPTONIKS is an optical technology company in the field of optical engineering and precision metrology. OPTONIKS’s technology is protected by eight patents.

We are working with: Intel and National Science Foundation (NSF) OPTONIKS has completed a 3D profilometry system prototype for Intel

metrology lab which is responsible for measurement requirements and requests from other departments within Intel and also develops and assesses new metrology systems at Intel. Optonik’s next step is to launch development of more 3D precision optical metrology systems for the lab. OPTONIKS expects for this product to be utilized in production lines that require no contact, real time precision metrology measurements.

Optoniks is also developing a system for a portable and real-time thickness assessment of highly scattering layers with rough surface conditions developed under highly competitive National Science Foundation (NSF) grant. NSF is a United States government agency that supports fundamental research primarily in the non-medical fields of science and engineering, but also has interagency projects funding medical technology and clinical efforts. The project under NSF grant is seeking to support the quantitative and spatially detailed inspection of layer applications to airplanes and automobiles; in addition to provide a tool that will offer a mechanism to real-time measurement of the polymer film thickness during the application process for consumer devices (e.g. conformal coating).

Innovation in Optical Engineering

3D Optical ProfilometryFilm Thickness MeasurementMobile Spectral Imaging

6

• The patented optical 3DPT of OPTONIKS offers 3D profiling of objects in situations like dark environment, dark objects and shiny objects. OPTONIKS has already developed a 3D profilometry system prototype for Intel metrology labs.

• As another application, the vision system, based on this technology, captures the 3D structure of the object regardless of its heat distribution and can identify objects and faces in dark environment. This 3D night vision offers the ability to obtain detailed features of a person under no light conditions.

• 3D profilometry has potential applications ranging from design verification to vision under total darkness. Design verification is a quality assurance must-have for every company in production.

• Significant advance in automated quality control. • Major licensing opportunity.



What this Means

7



• Non-contact, real-time, and in-process measurement of film’s thickness has been a major challenge for a broad range of industry for decades that is remained unresolved. In many industries, despite the higher cost, the films are thickened to make sure that the films have the required thickness, which other than cost may result in compromising the performance, increasing the waste of materials and increasing environmental footprints.

• OPTONIKS’ patented noise reduction technique enables a novel optical measurement system to perform film thickness determination on layers that are constructed with scattering material. Due to scattering nature of these films the current thickness measurement techniques either fail to make reliable measurements or they are very expensive and slow instruments. The developed system will be a nondestructive and non-contact measurement system that precisely measures the thickness of different layers where other non-contact techniques fail.

Clear Glass

Etched Glass

Polymer Coating

The etched glass is a layer with rough surface and the polymer coating is a layer with scattering material and rough surface. All three layer thickness can be measured using patented technology.

What this Means• OPTONIKS’ thickness measurement system addresses a major pain and

bottleneck in semiconductor IC packaging.• The bottleneck is driven by demands generated by growing market of

cellphones, tablets and other mobile devices.

8

We are developing a miniaturized version to make available this power to all.


• Cellphone-mount camera technology that reveals hidden details invisible to the naked eye.


A crime scene and the spectral image corresponding

to the bloodstain’s spectral signature

• The patented OPTONIKS’ SIT is a combined hardware-software technology that computationally separates the wavelength content of the object/scene into spectral sub-bands. The advantages of such spectral imaging system over current systems includes: Minimum change to convert a conventional imaging system into a

spectral imaging system. Fast measurement; it captures the image instead of raster scan the

whole image point by point which is time. Improving the wavelength resolution of the system without losing the

spatial resolution of the images. • Applications in law enforcement (crime scene, home land security), in

medical (identifying cancer cells and concentration), semiconductor industry (identification of microscopic defects), military (information withheld)

What this Means

9

Revenue Projection


Optoniks has three technologies with customized computation and data processing. The combination of optical technology and integrated proprietary computation and signal processing makes all technologies protected from reverse engineering, protecting the Optoniks market.


Technology 2017 2018 2019

Mobile Spectral Imaging

$0M $1M $33M

Film Thickness Measurement

$1M $3M $15M

3D Optical Profilometry & Others

$1M $2M $2M

Total $2M $6M $50M

10

M and M Technology

M&M Technology (MMTI) was established in 1996 as a sub-contract manufacturing company in printed circuit board design and manufacturing of electronic products (PCBA).Note it’s product are used by all the other companies to fulfill it’s board requirements.

A company that all others use as a springboard for engineering and development. It will increase in value from it’s current production customers as it meets the demands of of it’s new partner electronic production needs.

Printed circuit board assemblies (PCBA)

New CustomersSuppressionOneAquaLockOptoniksAmazing LEDExisting Customers

11Lowest profit estimates based for year one, linear profit, Time span of six years to determine stock value estimate.

Suppression One (6 Years)Investment Parcel $580,000/260,000 SharesMinimal Sales Formula 4000 Home Centers sell one per week x 52 =208,000 x profit $20=$4,160,000 yearly profitDividend per year $1,248,000 to NTIP with 20% to investors $230,000 First Year/$2,760,000 TotalStock Value should increase 11 times for a value of $6,479,000

Investment Parcel $750,000/600,000 SharesMinimal Sales Formula 20 systems/mo. x50 States =1000 x 12 months 12,000 x $200 profit =$2,400,000 yearly profitDividend per year $1,248,000 to NTIP with 20% to investors $144,000 First Year/1,278,000 TotalStock Value should increase 16 times for a value of $12,6000,000

AquaLock (6 Years)

Optoniks (6 Years)Investment Parcel $2,555,000/70,000 SharesMinimal Sales Formula-based on first year products ready for market Sales to Industry, Military, Consumer ProductsDividend per year $1,000,000 to NTIP with 20% to investors $200,000 First Year/4,000,000 TotalStock Value should increase 12 times for a value of $30,660,000

Investment / Return Capabilities

12

Amazing LED

M AND M

The potential far outweighs the risk.We have a group of products and companies that have an array of unique and needed products.. Management by NTIP will consolidate costs and save money. The companies are run with a fiscal responsibility as all expenditures are budgeted, and money is only spent on development and materials with minimal payroll for only essential personnel. Our goal is to get our these products ready for market, implement sales and make money. We have matching funds available from NSF to further add value to investors money doubling the effect without diluting shares. With your help, everyone will win..

Dividends will be paid to NTIP and then be distributed to investors. Investors will receive 20% of any dividends NTIP receives. They will own 70,000 shares of NTIP or 20% of shares. They will of course have value of each company but also all other endeavors of company NTIP is involved with but also overall value of NTIP

Investment Parcel $135,000/30,000 SharesMinimal Sales Formula Profit from one million units per year first year salesDividend per year $1,000,000 to NTIP with 20% to investors $200,000 First Year/$4,200,000 TotalStock Value should increase 30 times for a value of $4,050,000

Investment Parcel $480,000/3,000 SharesMinimal Sales Formula Existing sales plus increase from new product manufacturingDividend per year $248,000 to NTIP with 20% to investors $49,600 First Year/ 1,000,000 TotalStock Value should increase 4 times for a value of $1,920,000

Conclusion

management ideas products suppressionone aqualock optoniks amazing led m and m imagine seven items...

Documents