management regulations for the environment hazardous
TRANSCRIPT
Management regulations for the Environment Hazardous Substances to
be controlled which are included in parts and materials
(Purpose)
correlation matter specification management operational procedure this company
products, guarantees the products to have the market competition.
(Definition)
following levels are used.
Level : The substances and/or their purposes classified at this level are those
whose use must be banned immediately.
Level : Can be used, but restricting the use of concentration criteria.
Level : Can be used, is currently not explicitly restrict a concentration.
Immediately modify but can be tailored to customer requirements.
2.2 (using the time)
Components, materials management, under the prohibition of the use, the
concentration limits available, or can be used.
2.3 (Homogeneous material)
04(04 editions)
Mechanical splitting (such as cutting, drilling, grinding, cutting, etc) can no
longer be material. Homogeneous for the same composition evenly throughout
the material.
Even components of homogeneous material constitutes or forms, such as plastics,
alloys, coatings, glass and ceramics, that is.
2.4 (Packaging materials)
(Contains a range of products from raw materials to processing completed) by
the producer to the user or consumer, use, protection, can be mounted using
features such as, routing and delivery of any material, results in a product.
(Management standards for “Environment
Hazardous Substances to be Controlled”)
3.1 (Environment Hazardous Substances to be Controlled)
No
Substances
Limit
(mg/kg)
2 (Cd)
3 (Hg)
4 (Cr
+6 )
5 (PBB)
7 Bis(2-ethylhexyl) phthalate
9 Dibutyl phthalate(DBP) 1000
10 Diisobutyl phthalate(DIBP) 1000
REACH()
https://echa.europa.eu/regulations/reach/candidate-list-substances-in-articles
1000
12
3.2
3.2
targets”(Allowable concentration), Standards for measurement
(Pb)
)
for parts anddevices (the leaded solder whose lead
content is at least 85 wt%)
following alloys:
lead
Aluminum alloys Less than 0.4 wt%
Copper alloys
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(Cd)
materials
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(Hg)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(Cr +6
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(PBB)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
04(04 editions)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(2-)(DEHP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(BBP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(DBP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(DIBP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
REACH()
In accordance with the specification of EU REACH
Regulation Annex XVII
2
1000
containing other brominated flame retardants
Currently
unlimited
Management rules for packaging materials
()In accordance with the specification of EU reach appendix 17
Heavy metals (mercury, cadmium, lead, and hexavalent chromium)
materials and coatings
Pb + Cd + Hg +
Currently
unlimited
ISO 17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(Purpose)
correlation matter specification management operational procedure this company
products, guarantees the products to have the market competition.
(Definition)
following levels are used.
Level : The substances and/or their purposes classified at this level are those
whose use must be banned immediately.
Level : Can be used, but restricting the use of concentration criteria.
Level : Can be used, is currently not explicitly restrict a concentration.
Immediately modify but can be tailored to customer requirements.
2.2 (using the time)
Components, materials management, under the prohibition of the use, the
concentration limits available, or can be used.
2.3 (Homogeneous material)
04(04 editions)
Mechanical splitting (such as cutting, drilling, grinding, cutting, etc) can no
longer be material. Homogeneous for the same composition evenly throughout
the material.
Even components of homogeneous material constitutes or forms, such as plastics,
alloys, coatings, glass and ceramics, that is.
2.4 (Packaging materials)
(Contains a range of products from raw materials to processing completed) by
the producer to the user or consumer, use, protection, can be mounted using
features such as, routing and delivery of any material, results in a product.
(Management standards for “Environment
Hazardous Substances to be Controlled”)
3.1 (Environment Hazardous Substances to be Controlled)
No
Substances
Limit
(mg/kg)
2 (Cd)
3 (Hg)
4 (Cr
+6 )
5 (PBB)
7 Bis(2-ethylhexyl) phthalate
9 Dibutyl phthalate(DBP) 1000
10 Diisobutyl phthalate(DIBP) 1000
REACH()
https://echa.europa.eu/regulations/reach/candidate-list-substances-in-articles
1000
12
3.2
3.2
targets”(Allowable concentration), Standards for measurement
(Pb)
)
for parts anddevices (the leaded solder whose lead
content is at least 85 wt%)
following alloys:
lead
Aluminum alloys Less than 0.4 wt%
Copper alloys
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(Cd)
materials
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(Hg)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(Cr +6
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(PBB)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
04(04 editions)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(2-)(DEHP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(BBP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(DBP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(DIBP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
REACH()
In accordance with the specification of EU REACH
Regulation Annex XVII
2
1000
containing other brominated flame retardants
Currently
unlimited
Management rules for packaging materials
()In accordance with the specification of EU reach appendix 17
Heavy metals (mercury, cadmium, lead, and hexavalent chromium)
materials and coatings
Pb + Cd + Hg +
Currently
unlimited
ISO 17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.