1

1

MANDATORY DISCLOSURE

Academic Year: 2017-18

I. NAME OF THE INSTITUTION

Vidya Pratishthan’s Polytechnic College Vidyanagari, Indapur, Dist - Pune. PIN 413106. Tele phone: +91-2111-225600 Web site: www.vppolytechnic.org E-mail: vppci@vidyapratishthan.com DTE INSTITUTION CODE: D-6445 MSBTE INSTITUTION CODE: 1110

II. NAME & ADDRESS OF THE PRINCIPAL Shri. Prasad Ramakant Khatawkar Principal Vidya Pratishthan’s Polytechnic College Vidyanagari, Indapur, Dist.- Pune. PIN 413106 Tele phone: +91-2111-225600, 225700 Web site: www.vppolytechnic.org E-mail: info@vppolytechinc.org

III. GOVERNING BODY: (GB)

Members of the Board and their brief background - Governing Board is called Managing Committee in the Institution.

Name Designation

1. Hon’ble Sharadchandra Govindrao Pawar: President

Profile:

An outstanding national level political leader, a ground-root social worker. He has been Chief Minister of

Maharashtra for four times, Defense Minister of India; Leader of opposition in Parliament, Vice Chairman, National

Committee on Disaster Management. He started an educational society Vidya Pratishthan in 1972 creating excellent

institutions with world-class infrastructure and excellent academic culture. He has been awarded "Outstanding

Parliamentarian Award, 2003" by President Smt. Pratibha Devisingh Patil; Honorary Doctoral Degree in Humanities by

Lawrence Technological University, Southfield, Michigan, Detroit, U.S.A. A book titled "Fast Forward" - a collection of his

speeches released by Hon’ble Prime Minister of India in 2008. Formerly, worked as Agriculture and food Minister of India;

Chairman Asian Federation of Kabaddi Association. He has served as the Chairman of the Board of Control for Cricket in

India from 2005 to 2008 and as the president of the International Cricket Council from 2010 to 2012. On 17 June 2015, he is

re-elected as president of the Mumbai Cricket Association, a position he held from 2001 to 2010 and in 2012. He has initiated

rural development in Baramati during the early years of eighth decade of last century. He has started many water

management projects and other development activities, which culminated into a role model of rural development of India.

2

2

2. Shri. Ashokrao Vasudev Prabhune Vice-President

3. Shri. Dattatraya Rajaram Unde Secretary

4. Shri. Ramnik Ramaji Mota Treasurer

5. Hon. Ajit Anantrao Pawar Trustee

6. Hon. Sou. Supriya Sadanand Sule Trustee

7. Hon. Sou. Sunetra Ajit Pawar Trustee

8. Hon. Shri. Vitthal B. Maniyar Trustee

9. Shri. Balasaheb Patil Taware Member

10. Shri. Shrikant Murlidhar Sikachi Member

11. Hon. Adv. Neelima Vinodkumar Gujar Member

12. Hon. Dr. Rajeev Motilal Shah Member

Members of Academic Advisory Body

Chairman: Shri. Sharad Kulkarni

Members: Shri. Sharadchandra Pawar, President - Vidya Pratishthan, Baramati

Shri. Prabhune, Vice- President - Vidya Pratishthan, Baramati

Shri. Ashank Desai, Chairman & MD - Mastek Ltd., Mumbai

Shri. Harish Mehta, Chairman & MD - Onward Group, Mumbai

Shri. Sharad Godbole, Consultant

Shri. Deepak Ghaisas, CEO - I-Flex Solutions Ltd., Mumbai

Shri.V. K. Magapu, CEO - L & T, I T Mumbai

Shri. Achyut Godbole, MD - Concio Technologies, Mumbai

Shri. Aroon Joshi, Director - Aroon Joshi & Associates, Pune

Shri. Pratap Pawar, MD - Sakal Papers Ltd., Pune

Shri. Anand Khandekar, Director - Cradle Technologies, India

Shri. Mandar Agashe, Chairman - Codito, Pune

Ms. Priya Hiranandani, CEO - Zenta Technology Pvt. Ltd., Mumbai

Ms. Seema Malhotra, Chairperson - Weikfield Mnemonix Infonetworks Pvt. Pune

3

3

Mr. Manoj Tirodkar, Vice Chairman - Global Tele-Systems Ltd., Mumbai.

Shri. Sadanand Sule, Director Visio –IT Education Pvt. Ltd. Chairman

Dr. Amol C. Goje, Director - V.I.I.T., Baramati.

Frequency of the Board Meetings and Academic Advisory Body:

Board meetings are held every month, the Academic Advisory body meeting is held once in a

year as per the convenience of the President.

Organizational chart and processes

Nature and Extent of involvement of faculty and students in academic affairs / improvements:

Principal is the chief executive of the College. He manages college activities through academic coordinator and different heads of departments, Registrar and Accountant. The academic function is managed through the Heads, Lecturers. The Librarian manages library with the coordination of HODs, staffs and accountant. The purchases of equipments and consumables are done as per budget provisions with the help of store and accounts.

At the commencement of every term/semester, an academic planning is done in a staff meeting to

decide the course of activities and policies for the term to achieve academic improvements and excellence and

ethical standards. A feedback from students about their faculty is taken once every year and the performance

MANAGEMENT

SELECTION GRADE LECTURER

SENIOR SCALE LECTURER

ACCOUNTANT

HEAD OF DEPARTMENT

REGISTRAR

LECTURER

LABORATORY STAFF CLERK

ACCOUNTANT CLERK

PEON

OFFICE SUPERITENDENT

CASHIER

4

4

of the staff is assessed accordingly as one of the elements of staff assessment. The Management committee

reviews the monthly activities through its meetings and gives directions about the policies and purchases for

further actions. The management decides the budget for the ensuing year. Annual general meeting of the

society is held once in year where the review of all institutes is taken and the decisions for the next year plans

are taken.

Nature and Extent of involvement of faculty and students in academic affairs improvements:

The improvement of faculty is a continuous activity where the faculty is encouraged to attend various workshops, training programs, seminars, conferences, and in-house meetings. The faculty is encouraged to improve their academic qualifications with sponsorship from college. Staff members are also encouraged for writing technical papers articles in journals. Various personality development programs are arranged in the college by inviting experts. Students are given input to improve learning abilities, memory techniques and enhancement of reading speed. Various experts are invited for workshops on techniques.

Mechanism/Norms & Procedure for democratic/good Governance:

The college activities are managed through multiple group thinking on day to day issues and policies

are decided based on past experience, improvements in view and directives of DTE / AICTE or

Management. Staff contributes their views and a conscience decision is taken which is followed as

policy by all concerned. Student meetings are conducted with principal to decide the policies and

procedures for student’s activities, sports, gatherings etc. The staff meetings are held once in a month

whereas the HODs and Principal meet every week. The library works through the Library Committee of

which Principal is Post facto Chairman. One student council member represents each department on

this committee.

Student Feedback on Institutional Governance/faculty performance:

Every semester student feedback on faculty and institution is taken. The feedback is assessed and

reviewed by Principal, HOD and concerned staff. Steps are taken to improve the situation. Follow up is

done by HODs. This feedback mechanism has helped to improve the image of the college in the eyes of

the students and parents.

5

5

Grievance redressal mechanism for faculty, staff and students:

The grievances of the students are settled through the concerned head of the department,

staff and student along with the parent if needed. The common matters are discussed in the discipline

committee meeting and agreeable solutions are decided as policy for the college working and presented

to them managing committee for approval. Serious misdeeds are handled as per DTE/MSBTE act and

procedure by the management.

PROGRAMMES

Name of the Programmes approved by the AICTE

Sr. No. Name of Course Sanctioned Intake 1 Automobile Engineering 60

2 Electronics & Telecom. Engineering 60

3 Computer Engineering 60

4 Mechanical Engineering 60

5 Civil Engineering 60

For each Programme the following details are to be given:

Name Number of Seats Duration Fees Placement

Facility

Automobile Engineering

60

3 Years 31000 /-

Available

Civil Engineering 60 3 Years 31000 /-

Computer Engineering 60 3 Years 31000 /-

Electronics & Telecom. Engineering 60 3 Years 31000 /-

Mechanical Engineering 60 3 Years 31000 /-

6

6

V. PROFILE OF PRINCIPAL WITH QUALIFICATIONS:

Name of the Principal: Prof. Khatawkar Prasad R.

Qualification: M.E. (Electronics), MBA

Academic Co-coordinator:

Mr.Kulkarni M.D.

Qualification: M. E.(Mech) B.E.( Prod)

7

7

VI. FEE

Details of fee, as approved by State fee Committee, for the Institution. –Rs. 31000 /-for all courses. Time schedule for payment offer for the entire program –At the time of admission No. of Fee waivers granted with amount and name of students. - Nil. Number of scholarship offered by the institute, duration and amount

All scholarships are applicable under various schemes of Govt. of Maharashtra. Criteria for fee waivers/scholarship- As laid down by the Govt. Estimated cost of boarding and Lodging in Hostels.

Hostel for Girls: Rs 14,700/- per annum + 2000 Deposit and Mess charges: Rs.1,750/-per month.

Hostel for Boys: Rs 14,700/- per annum + 2000 Deposit and Mess charges: Rs.2,000/-per month

VII. ADMISSION:

VIII. ADMISSION PROCEDURE:

The institute follows the procedures, rules & regulations laid down by The Directorate of Technical Education, Maharashtra from time to time. For detailed information please log on to www.dte.org.in.

IX. APPLICATION FORM:

Application form is available in the institute whenever admission process will start every academic year.

Name Number of Seats sanctioned

Number of seats admitted in A.Y. 2017-18

Automobile Engineering

60

07

Civil Engineering 60 32

Computer Engineering 60 26

Electronics & Telecom. Engineering 60 05

Mechanical Engineering 60 23

8

8

X. LIST OF ADMITEES:

VIDYA PRATISHTHAN'S

POLYTECHNIC COLLEGE, VIDYANAGARI, INDAPUR

ADMITTED MERIT LIST OF CANDIDATE OF DIPLOMA COURSE FOR THE FIRST YEAR

2017-18

Name of Course: AUTOMOBILE ENGINEERING

Sr. No.

Merit No.

Merit Marks Name of Student Gender Seat Type Category

1 61804 55 GAIKWAD MAHESH DATTATRAYA Male NGOPENH SC 2 48116 64.8 HINGASE MAYUR RAMCHANDRA Male NGOPENH NT 2 (NT-C) 3 59262 57.2 JAWAHIRE RAJAN KAMLAKAR Male NGOPENH SC 4 56373 60 KADALE PANKAJ BALASAHEB Male NGOPENH Open 5 64463 52.2 KASBE LAXMAN BAPU Male TGOPENH Open 6 43032 67.8 MADANE VISHAL KAKASO Male NGOPENH Open 7 19815 80 MANE MAHESH DATTATRAY Male NGOPENH Open

Name of Course: CIVIL ENGINEERING

Sr. No.

Merit No.

Merit Marks Name of Student Gender Seat Type Category

1 32819 73.2 BADGUJAR VISHAL KAILAS Male NGOPENH Open 2 26956 76.2 BANSODE KSHITIJ SIDRAM Male NGOPENO SC 3 12164 84 BARGE SNEHAL RAMESH Female NLOPENO Open 4 8 52.6 BHOSALE KRANTISINH EKNATH Male ACAP Open 5 23969 77.8 CHAVAN VIKRAM ASHOK Male NGOPENO Open 6 54453 60.8 DHEPE ADITYA PANJABRAO Male NGOPENO Open 7 29435 75 DIGVIJAY SUNIL GAIKWAD Male NLOPENH Open 8 51751 62.6 GAIKWAD GANESH MALHARI Male NGOPENH Open 9 58983 57.4 GANDALE VEDANT KALIDAS Male TGOPENH Open

10 26518 76.6 GARGADE SANKET SIDHESHWAR Male NGOPENH NT 2 (NT-C) 11 20149 79.8 JADHAV AISHWARYA ANIL Female NLOPENO Open 12 40362 69.4 JADHAV SAKSHI SHAHAJI Female NLOPENH SC 13 64153 52.6 JAGTAP YOGESH TUKARAM Male NGNT3O Open 14 2 82.6 MADANE ANURAG VIJAYANAND Male ACAP NT 2 (NT-C) 15 58605 57.8 MAKHARE PRAJAKTA PRAMOD Female NLOPENH SC 16 33744 72.8 MASAL ANIKET NAMDEO Male NGOPENH NT 2 (NT-C) 17 55408 60.2 NAGARE HANUMANT BAPU Male NGOPENO Open 18 39631 69.8 NALAWADE SATYAJIT ANIL Male NGOPENH Open 19 16737 81.6 NALE ANJALI NAGANATH Female NLOPENH Open 20 25100 77.2 PARBAT SHIVPRASAD BALASAHEB Male NGOPENO Open 21 44134 67.2 PATALE YASH SAMBHAJI Male NGOPENH Open 22 44027 67.2 PAWAR VIRAJ VILAS Male NGOPENH Open 23 34734 72.2 RANANAVARE GAURAV BAPUSO Male NGOPENO Open 24 50779 63.2 SANGADE VALLABH BHARAT Male NLSCO Open 25 18141 80.8 SAVALKAR PRASHANT VISHNUPANT Male NGOPENH NT 2 (NT-C) 26 6 56.8 SAYYAD MUSKAN MAHEMUD Female ACAP Open 27 7 56.2 SHITOLE SAHIL MACHHINDRA Male ACAP Open 28 42855 68 TAMBOLI NIYAJAHEMAD RAHIMAN Male NGOPENH Open 29 57089 59 VARKAD SURESH RAMRAO Male NGSTO Open 30 3549 90 DOKE SHIVANI SUNIL Female TFWS Open 31 10618 84.8 MANE JANHAVI MANOJ Female TFWS DT/VJ

9

9

32 3928 89.6 NALE VAISHNAVI VAIJINATH Female TFWS OBC Name of Course: COMPUTER ENGINEERING

Sr. No.

Merit No.

Merit Marks Name of Student Gender Seat Type Category

1 40613 69.2 BAGAL SHRIKRUSHNA SUHAS Male NGOPENH Open 2 20227 79.8 BAGRECHA SEJAL PARASMAL Female NLOPENH Open 3 26224 76.6 CHAVAN PRAVIN AJINATH Male NGOPENH Open 4 30302 74.6 CHAVAN PRITI PANDHARI Female NLOPENO Open 5 20788 79.4 CHAVAN VAISHNAVI SHANTARAM Female NLOPENH OBC 6 51890 62.6 GAIKWAD AARTI ARJUN Female NGOPENO Open 7 33541 72.8 GAIKWAD ALISHA LAXMAN Female NLOPENH DT/VJ 8 1 85 GAVALI CHAITRALI NARHARI Female ACAP OBC 9 38154 70.6 GEND SANDESH SHARAD Male NGOPENH Open

10 39466 69.8 GHODAKE ROHAN MACHHINDRA Male NGOPENH Open 11 20885 79.4 GIRME PRUTHVIRAJ HEMANT Male NGOPENO Open 12 13861 83 GORE SHUBHAM ANNA Male NGOPENH Open 13 14341 82.8 HANJAGIKAR PRATIK SANJAY Male NGOPENH SBC 14 21105 79.4 JADHAV AJIT SUDHAKAR Male NGOPENH Open 15 44383 67 KALBHOR SAKSHI ARJUN Female NGOPENH Open 16 7249 87 KAMBLE MANISHA ARUN Female NLOPENH SC 17 45131 66.6 KAMBLE VISHAL RAJKUMAR Male TGOPENH SC 18 38129 70.6 KHARADE MAYUR SANTOSH Male NGOPENH OBC 19 40918 69 KULKARNI KAUSTUBH NITIN Male NGOPENO Open 20 3 78.4 MISAL NIKITA VIKRAM Female ACAP Open 21 31848 73.8 PARADE ARPITA PANDIT Female NLOPENO Open 22 47393 65.4 PASAGE SAREEKA MOHAN Female NLOPENH Open 23 28747 75.4 PAWAR SOHAM SAMADHAN Male NGOPENO Open 24 36930 71.2 WAGHMODE AVINASH CHANDRKANT Male NGOPENH NT 1 (NT-B) 25 10769 84.8 ADSUL DHANASHRI MOHAN Female TFWS Open 26 13442 83.2 SURYAVANSHI SARITA JAGANNATH Female TFWS Open

Name of Course: ELECTRONICS & TELECOMMUNICATIONS ENGINEERING

Sr. No.

Merit No.

Merit Marks Name of Student Gender Seat Type Category

1 37664 70.8 BHONG HARSHAD HANUMANT Male NGOPENH OBC 2 13053 83.4 KHATAKE DNYANESHWAR RAVINDRA Male NGOPENH Open 3 56210 60 MOTE SUJIT SHIVAJI Male NGOPENH Open 4 37029 71.2 SHINDE PRATIK SHAHAJI Male NGOPENH Open 5 5000 88.8 ZAGADE POOJA RAMDAS Female NLOPENH OBC

Name of Course: MECHANICAL ENGINEERING

Sr. No.

Merit No.

Merit Marks Name of Student Gender Seat Type Category

1 39079 70 BHOSALE ROHIT DATTATRAYA Male NGOPENH SC 2 57946 58.4 DHAINJE SUMIT PRADIP Male NGOPENO SC 3 35937 71.6 EKATPURE ADITYA NILESH Male NGOPENO OBC 4 37879 70.6 INGWALE GANESH SHIVAJI Male NGOPENH Open 5 26721 76.4 JADHAV BHIMRAO HANUMANT Male NGOPENH SC 6 47690 65.2 KUMBHAR KAUSHAL SURESH Male NLOPENO Open 7 37671 70.8 KUMBHAR VISHAL SURESH Male NLOPENO Open 8 62825 54 MANE DESHMUKH OM RAJENDRA Male NLOPENH Open

10

10

9 37343 71 MANE SANKET HEMANT Male NGOPENH SC 10 4 77.6 MANE SHUBHADA VASANT Female ACAP Open 11 53804 61.4 MORE RAHUL POPAT Male NGOPENO SC 12 5 70.2 RAUT SIDDHANT SANTOSH Male ACAP OBC 13 60887 55.8 SHENDKAR RANJIT RAJKUMAR Male NGOPENH Open 14 17957 80.8 SHEWALE RITESH RAJU Male NGOPENH SC 15 35323 72 SHINDE SAMARTH DINESH Male NGOPENH SC 16 18929 80.4 SHINDE SAVATA VITTHAL Male NGOPENH Open 17 49922 63.8 SHINGADE PANDURANG MOHAN Male TGOPENH NT 2 (NT-C) 18 42016 68.4 SONAVANE KARAN MANOJ Male NGOPENO SC 19 69905 43.6 SONAWANE VRUSHABH ASHOK Male NGOPENO SC 20 42096 68.4 WAGHMODE VISHVJIT SATISH Male NGNT2H NT 2 (NT-C) 21 13715 83 GAVALI SAGAR PRADIP Male TFWS OBC 22 10212 85.2 NIMBALKAR PRUTHVIRAJ DHANANJAY Male TFWS Open 23 7915 86.6 PAWAR SUMIT SACHIN Male TFWS Open

XI. INFRASTRUCTURE AND RESOURCES AVAILABLE:

LIBRARY:

A) Total area of the library - 544 Sq. meter.

B) Seating capacity of the library -128 seats.

C) Working hours of library: - 09:00 am to 05:00 pm.

D) Library Automation.

E) Book Bank facility available for SC students from Dept. of Social Welfare Govt. Of Maharashtra.

F) Online yearly subscription of British library (www.onlinelibrarybritishcouncil.co.in)

G) Inter Library Loan Facility.

H) Job Alert Notifications displayed on notice Board for students from Employment News.

I) Overnight Reading Room facility during examination period.

J) Best Library User Award for every academic year.

K) Total Investment as on today: 20,05,801/-

Details of the Library:

Sr. No. Course Number of titles

Number of volumes

No. of National Journals

1 AE 215 1079 3 2 CE 249 963 3 3 CO 360 2456 3 4 EJ 319 2308 3 5 ME 225 1118 3

Laboratories:

Sr. No. Name of Course Name of Laboratory Total Area of

Lab in Sq. M. Total Cost (Rs.)

1 Common for All branches

for First year (AE,CE,CO,EJ & ME)

APPLIED PHYSICS 75.04 639644

APPLIED CHEMISTRY 75.04 1237417

11

11

LANGUAGE LAB 66.50 576125

2 Automobile Engg.

AUTOMOBILE SYSTEM LAB 66 224324 AUTOMOBILE ENGINE LAB 66 1081999 AUTOMOBILE ELECTRICAL & ELECTRONICS LAB 66.66 74256

AUTOMOBILE WORKSHOP 66 64284 ENIVORENMENTAL POLLUTION CONTROL 66 194860 CAD/CAM LAB 24 552000

3 Civil Engg.

STRENGTH OF MATERIAL 66 936058 SURVEYING 66 568201 GEOTECHNICAL ENGG. LAB 68 303481 ENGG. MECHANICS LAB 68 78651 CONCRETE TECHNOLOGY LAB 66 802723 COMPUTER LAB 66.40 580000 ENVIRONMENTAL LAB 66 87075 HYDRAULICS LAB 66 51161

4 Computer Engg.

HARDWARE LAB 66.40 Donated SOFTWARE TESTING LAB 66.30 1005911 NETWORK LAB 66.30 979251 PROGRAMMING LAB 66 745500 LINUX LAB 66.40 515855 DATABASE LAB 66.00 816106

5 Electronics & Tele-

Communication Engineering

COMMUNICATION LAB 66.40 901383 ELECTRICAL LAB 76.00 798993 ELECTRONICS WORKSHOP 66 167635 COMPUTER CENTER & HARDWARE LAB 66 739766

ANALOG ELECTRONICS LAB 66 582019 DIGITAL & MICROCONTROLLER LAB 66 134517 MEASUREMENT & CONTROL LAB 66 485853 ADVANCE COMMUNICATION LAB 66.6 103036

6 Mechanical Engineering

MACHINE SHOP 66 6121667 AUTOMATION LAB 66 1853454 MMC LAB 66 55900 CAD/CAM LAB 66.40 617240 TOM LAB 70.88 146250 POWER LAB 102.20 276942 FMM LAB 70 600187 MQC LAB 80 356085

Detailed Equipment list of respective Laboratory: 1. Applied Physics Lab:

Sr. No. List of Equipments

1 Flat spiral spring 2 Compound bar pendulum 3 Knife edge for bar pendulum 4 Bunsenís photometer 5 Luminous bodies of two different luminous intensities 6 Portable decibel meter 7 Joules calorimeter 8 Ammeters of ranges 0-100 mA 9 0-100 microampere, 0-2 ampere

10 0-5 ampere, 0-50 ampere

12

12

11 Connecting wires 12 Plano convex lens of large radius of curvature of the order of 100 cm 13 Short focus convex lens (15 to 20 cm) 14 Optically plane glass plates 15 Table lamp 16 Magnetic needle 17 Spectrometer 18 Portable spray cans of penetrant 19 Searle’s apparatus for determination of thermal conductivity 20 Steam chamber 21 Dimmer stat 22 Capacitors (60-80 mF) 23 Voltmeter (0-200 V) 24 Flat condenser plates 25 Small polythene spacers about 1mm thick 26 Reed switch 27 Signal generator with low output impedence 28 Protective resistor ( R = 100 k ohm) 29 Platinum resistance thermometer 30 p-n junction diode kit to study I-V characteristics. 31 Galvanometer 32 Resistance box 33 Potentiometer with jockey 34 Kit to measure the numerical aperture of the plastic fiber using 660 nm wavelength LED. 35 Micrometer Screw Guage 36 Pullinger Apparatus 37 Vernier caliper 38 Young’s modulus 39 Capillaries of different bore 40 Stokes apparatus 41 He-Ne Laser 42 Digital multimeter 43 Regulated power supply 44 Rheostat 45 Thermometer 46 Boyles law 47 Heater 48 Thormocouple 49 Glass Slab 50 Slotted weight 51 Sodium lamp 52 Mercury lamp 53 Newton’s ring Apparatus 54 Sonometer with tuning fork

2. Applied Chemistry Lab:

Sr. No. List of Equipments

1 Periodic Table Chart 2 Contech Electronic Balance( 0.001to 120 g ) 3 Digital Coductivity Meter,( Global Make) With Cell 4 Electric Oven( 18" X 18" X 18" ) 5 Distilled Water Plant (Elect) 6 Ltr Cap 6 Analytical weight box (with work cerificate) 1mg to 100gm 7 Battery eliminator 2 To 12 Volt

13

13

8 Beaker 250 ml (Borosil) 9 Beaker 500 ml (Borosil)

10 10 Beaker Polythene 1000 ml 11 Beakers 50 ml 12 Beakers100 ml

13 Burette Clamp fischer type, dia pressed made of M.S. Power Coated for 1 burette with bosshead

14 Burette Stand with clamp and bosshead 15 Burette with Pinch Cock 25 ml Borosil 16 China Dish 3" 17 Clay Pipe Triangle 18 Conical flank 100ml 19 Conical Flasks 250 ml (Borosil) 20 Copper Plate for Faraday's Pt Law ECE 21 Copper wires for connection 22 Crucible with Lid 3" (Porcelein) 23 Drier Hot & Cold (Philips) 24 Dropper with Latex 25 Filter Paper 26 Flat Bottom Flask 1000 ml (Borosil) 27 Flat Bottom Flask 2000 ml (Borosil) 28 Flat Bottom Flask 5000 ml (Borosil) 29 Funnel 4" Long Stem (Borosil) 30 Glass Rod 31 Glass Tube App. 0.2mm inner Diameter 32 Glass Tube App. 0.5 mm inner Diameter 33 Indicator Bottles 25 ml (Polythene) 34 Kipps Appartus 1 Lit (Borosil 35 Magnetic Stirrer 1000 ml with hotplate 36 Measuring Cylinder 10 ml (Borosil) 37 Measuring Cylinder 100 ml (Borosil) 38 Measuring Cylinder 1000 ml (Borosil) 39 Metal Blow Pipe 40 One way key 41 Ostwalds Viscometer 25 ml (Borosil) 42 Pair of Tongs 43 Pipette 10 ml 44 Pipette 5 ml 45 Plastic Can( 5 Lit.) 46 Plastic Tray 47 Polish Papers 48 Reagent Bottles 250 ml 49 Reagent Bottles 250 ml (Amber Coloured) 50 Reagent Bottles with wide mouth 51 Reagents Bottles 1000 ml 52 Reagents Bottles 250 ml 53 Rheostat (8") 54 Rubber tubing for burette 6mm 55 Rubber tubing for water steel 6mm 56 Spattula 6" Steel 57 Stop Watch Electronic (Racer) 58 Test Tube Brush 59 Test Tube Holder 60 Test Tube Stand (Polythene) 61 Test tube with rim 15 x 125 mm(Borosil) 62 Thermometer (0 to 110)

14

14

63 Thermometer (0 to 360) 64 Tripod Stand (Metal) 65 Volumetric flask 100 ml 66 Volumetric flask 1000 ml 67 Volumetric flask 250 ml 68 Volumetric flask 500 ml 69 Volumetric Pipette 25 ml (Borosil) 70 Watch glass(1.3") 71 White Appron (36") 72 White Appron (38") 73 Wire Guaze with frame Chemicals:

Sr. No. List of Chemicals 1 Acetic Acid ( Glacial) 2 Ammonium Chloride 3 Ammonium Carbonate 4 Ammonium thiocynate 5 Ammonium Acetate 6 Ammonium Oxalate 7 Ammonia( Liquor) 25% 8 Aluminium Chloride 9 Aluminium Nitrate

10 Acetone 11 Barium Nitrate 12 Bromine Water 13 Barium Sulphate 14 Barium Chloride 15 Blue Litmus Paper Grannuals 16 Blue Litmus Paper 17 Calcium sulpahte 18 Chloroform 19 Chlorine Water 20 Copper Filings 21 Copper Sulphate 22 Copper Chloride(Cupric) 23 Chromium Nitrate 24 Chromium Chloride 25 Calcium Carbonate 26 Cobalt Chloride 27 Cobalt Nitrite 28 Carbon Tetrachloride 29 Dimethyl Glyoxime 30 Ethyl Alcohol 31 Ferrous Sulphate 32 Ferric Chloride 33 Ferrous Sulphide 34 Ferric Sulphate 35 Formaldehyde 36 Grease 37 Hydrochloric Acid 38 Iodine 39 Lead Oxide 40 Lead Acetate 41 Lead Chloride 42 Lead Sulphate

15

15

43 Litmus Paper ( Red) 44 Litmus Paper Red Grannuals 45 Mercuric Chloride 46 Mercurious Chloride 47 Manganese Dioxide 48 Magnesium Sulphate 49 Magnesium Chloride 50 Nitric Acid 51 Nickel Chloride 52 Nickel Nitrate 53 Nickel Sulphate 54 Potassium Chromate 55 Potassium Iodide 56 Potassium Dichromate 57 Potassium Hydroxide( Flakes) 58 Potassium Ferrocynate 59 Potassium Ferricynate 60 Potassium Permanganate( Crystals) 61 Perchloric Acid 62 Picric Acid 63 Phenolphthalein 64 Potassium Chloride 65 Potassium Bromide 66 Potassium Pyroantimonate 67 Phenol 68 PH Paper 69 Sodium Hypophosphite 70 Silver Nitrate(A.R.) 71 Sodium Cobaltinitrite 72 Sodium Hydroxide ( Flakes) 73 Sodium Carbonate 74 Sulphuric acid 75 Sodium Chloride 76 Sodium Azide 77 Sodium Thiosulphate 78 Starch Powder 79 Starch Paper 80 Starch Iodide Paper 81 Zinc Sulphate 82 Universal indicator 83 Ferrous alloy 84 Brass alloy 85 Agar powder 86 oil paint 87 Lubricant oil

3. Language Lab:

Sr. No. List of Equipments/items

1 Dell OptiPlex PC (21) 2 Wordsworth language Lab ( Software) 3 Headphone with mike (I-ball) 4 Cd’s on spoken English and personality development

4. Audio-Video Room:

16

16

Sr. No. List of Equipments

1 Plasma 32” LCD TV 2 Sound system 3 Dell OptiPlex PC

5. Automobile System lab: Sr. No. List of Equipments

1 Two Wheeler 4S (Fiero F2) 2 Scooter (Bajaj) 3 Cut section model of Synchronous Gear box 4 Cut section model of Sliding Mesh Gear box 5 Cut section model of Fully Floating Differential & Rear axle mechanism (working) 6 Cut section model of Semi floating Differential & Rear axle mechanism (working) 7 Cut section model of Diaphram Clutch system (working) 8 Cut section model of Single Plate Coil Spring Clutch System 9 Cut section model of Multiplate Clutch System

10 Cut section model of Centrifugal Clutch 11 Propeller shaft & Universal joint assembly 12 C.V.Joint unit 13 Sliding Mesh Gear box assembly 14 Synchronous(Synchromesh) Gear box assembly Mahindra & Mahindra Jeep assembly 15 Single Plate Clutch (Coil Spring) 16 Cut Section model of steering gear box es 17 Cut section model of hydraulic braking system 18 Torque Convertor 19 Cut section model of disc brake system 20 Four Wheeler Diesel (Primier Padmini 138)

6. AUTOMOBILE ENGINE LAB Sr. No. List of Equipments

1 Engine Test Rig 2 Cut section model of two stroke S.I. petrol engine assembly 3 Cut section model of four stroke S.I. petrol engine 4 Model of four stroke Diesel engine cycle 5 2Stroke Petrol Engine assembly Bajaj M50 Engine Assly 6 Demonstration of fuel supply system of a Petrol Engine 7 Demonstration of fuel supply system of a Diesel Engine 8 Cut Section of Mechanical Fuel Pump 9 Cut Section of Carburettors

10 Cut Section of Radiator 11 Cut Section of Water pump 12 Cut Section of I.C.Injector (4 Types) 13 Cut Section of Diesel Filter 14 Cut Section of Gear Lubrication Pump 15 Cut section model of Silencer 16 Valve Valve seat leakage tester 17 Spark plug cleaner & tester 18 Injector (Nozzle) cleaner & tester 19 Model of MPFI Engine 20 Bullet Engine (Scrap) 21 Multicylinder Petrol Engine (Scrap) 22 Engine of Luna (Scrap)

7. AUTOMOBILE ELECTRICAL & ELECTRONICS LAB: Sr. No. List of Equipments

1 Battery cell tester 2 Xenon Timing Light For adjustment of ignition timing

17

17

3 Cut Section model of Dynamo 4 Cut Section model of Ignition Coil 5 Cut Section model of Alkaline Battery 6 Demonstration of Electrical Wiring System in 4Wheeler 7 Battery Load tester 8 Demonstration of Electrical Wiring System in 2Wheeler

8. AUTOMOBILE WORKSHOP: Sr. No. List of Equipments

1 Demonstration Board Of Air Conditioning System 2 Pneumatic Tools for Automobile Maintenance 3 Solar Cooker

9. ENIVORENMENTAL POLLUTION CONTROL: Sr. No. List of Equipments

1 Exhaust Gas Analyzer Five Gas analyzer 2 Turbidity Tester of water sample 3 Noise Tester

10. CAD/CAM LAB: Sr. No. List of Equipments

1 Computers 24 Nos. 11. STRENGTH OF MATERIAL LAB:

Sr. No. List of Equipments 1 Universal Testing Machine 100 T Capacity 2 Shear Test Attachment 3 Brinell Hardness Test Attachment 4 Extensometer (Mechanical Type) 5 Rockwell Hardness Tester Model UMIROK 6 Brinell Hardness Tester Model UMIB 3000 7 Impact Testing Machine Model 12. SURVEYING:

Sr. No. List of Equipments 1 Telescopic Alidade 2 measuring chains 30m ,150 links with brass handles & 10 arrows 3 Measuring chain 20m,150links with brass handles & 10 arrows 4 Plumb Bob 5 Optical square brass reflector type 6 Placom digital planimeter (model kp90n) 7 Surveyor Compass with stand 8 Plane table 22mm thk with stand and all accessories 9 ARROWS

10 STEEL TAPE 30M 11 RANGING RODS 12 PRISMATIC COMPASS WITH STAND 13 DUMPY LEVEL 14 ALUMINIUM STAFF 4M 15 ALUMINIUM STAFF 5M 16 ALUMINIUM STAFF 6M 17 AUTOMATIC LEVEL (PENTAX MODEL AP241WITH STAND) 18 CROSS STAFF ALUMINIUM WITH POLE 19 TILTING LEVEL WITH STAND 20 STANDARD VERNIER THEODOLITE WITH STAND 21 MICRO OPTIC ONE SECOND THEODOLITE LMT1 WITH THREE GROOVED 22 ELECTRONIC THEODOLITE MODEL LETA2 WITH COMENSATOR 23 Standard Vernier Theodolite 24 Polar Planimeter

13. GEOTECHNICAL ENGG. LAB:

18

18

Sr. No. List of Equipments 1 Core Cutter 100mm dia x 127.3mm long. 2 Aluminium Sampling Tins with lid: 50mm x 25mm. 3 Aluminium Sampling Tins with lid: 50mm x 50mm 4 Aluminium Sampling Tins with lid: 75mm x 25mm. 5 Aluminium Sampling Tins with lid: 75mm x 50mm 6 Aluminium Sampling Tins with lid: 100mm x 50mm.

7 Hot Air Oven electrically operated, thermostatically controlled, Stainless Steel interior. Temperature range ambient to 250°C. Internal Size: (450x450x450mm) 18”x18”x18”

8 Standard Test Sieves 300mm internal dia made of GI frame as per IS complete of required apertures: 100, 80, 63, 40, 20, 10 & 4.75mm

9 Standard Test Sieves 200mm internal dia made of Brass frame as per IS : 4.75, 2 & 1mm, 600, 425, 300, 212, 150mic

10 Standard Test Sieves 200mm internal dia made of Brass:75mic 11 Lab Electronic Balance 10kg cap acc 0.1gm (100mg) 12 Dolly 25 mm high and 100 mm 13 CoreCutterRammer10kgwith rod. 14 Hydraulic Extractor extracting samples. Supplied complete with 100mm adaptor & 150mm adaptor

15 Equipment for determination of specific gravity for Fine and Coarse Aggregate As Per IS 23861963 (PIII) Pycnometer (1000ml) with Brass Cone.

16 Liquid Limit Device As Per IS 2720 (PV) Electrically Operated fitted with blow counter complete with casangrande grooving tools

17 Set of Grooving Tools for Liquid Limit. 18 Soil Permeability Apparatus As Per IS 2720 (PXVII) for Constant Head / Falling Head 19 Direct Shear Apparatus, Electrically Operated

20 Proctor Compaction apparatus As Per IS 2720 (PVII) consisting of compaction mould 100mm dia x 127.3mm ht (1000cc) complete with collar & base plate (M.S) and rammer 2.6kg x 310mm controlled fall (For Light Compaction).

21 Proctor Compaction apparatus As Per IS 2720 (PVIII) consisting of compaction mould 150mm dia x 127.3mm ht (2250cc) complete with collar & base plate (M.S) and rammer 4.89kg x 457mm controlled fall (For Heavy Compaction

22 Lab C.B.R. Testing Apparatus :CBR Load Frame with 5 Tons capacity, Electrically cum Manually Operated with 1.25mm/min Speed As Per IS 2720 (Pxvi)

23 Unconfined compression test apparatus complete with Load frame 5 Tons (50kN) capacity Electrically cum Manually Operated

24 Triaxial Cell

25 Sand pouring cylinder As Per IS 2720 (PXXVIII) 100mm diameter with calibrating container and tray

26 Set of Stainless Steel Spatula 100 and 200mm long with wooden handle 27 Gauging Trowel as per IS with wooden handle. 28 Laboratory Vane Shear test apparatus AS PER IS 2720 (PXXX) electrically operated 29 Ground glass plate with rounded edges 450mm x 450mm x 10mm 30 Steel Straight Edge 300mm long with one beveled edge 31 Porcelain Evaporating Dish 125mm dia. 32 Circular Enamel Tray: 300mm dia 33 Posthole Augur 150mm dia with 1 Mtr long extension Rod & ‘T’ Handle

14. ENGG. MECHANICS LAB: Sr. No. List of Equipments

1 Beam Reaction Apparatus 2 Theorem of Moment Apparatus 3 Jib Crane Apparatus 4 Single Purchase Crab 5 Double Purchase Crab 6 Worm & Worm Wheel 7 Differential Axle and Wheel 8 Simple Screw Jack 9 Frictional Apparatus

19

19

15. CONCRETE TECHNOLOGY LAB: Sr. No. List of Equipments

1 Blaine’s Air Permeability Apparatus 2 Sieve shaker gyratory (motorized) 3 Vicat’s needle apparatus with dashpot 4 Le chateliers mould 5 Cube moulds 7.07cm cube 6 Cube moulds 150mm cube 7 Cylindrical moulds 150mm x 300mm 8 Vibrating table 9 Lab concrete mixer(motorized)

10 Aggregate impact value apparatus 11 Aggregate crushing value apparatus 12 Los angeles abrasion testing machine 13 Density basket 14 Bulk density measure 15 Slump test apparatus 16 Compacting Factor Apparatus 17 Vibrating Machine 18 Glass measuring cylinder (500ml) capacity 19 Glass measuring cylinder (1000ml) capacity 20 Enamel tray 600mmx450mmx50mm 21 Enamel tray 450mmx300mmx40mm 22 Enamel tray 300mmx250mmx40mm 23 Needle vibrator 24 Compression testing machine 3000KN capacity 25 Test sieve 200mm dia80mm, 60mm,40mm,20mm,10mm 26 Sieve300mm dia4.75,2.36mm, 1.18mm,600mic.,300mic.,150mic,lid,pan 27 Sieve 300mm dia90mic. 28 Sieve 300mm dia75mic

16. COMPUTER LAB: Sr. No. List of Equipments

1 COMPUTERS 25 Nos.

17. ENVIRONMENTAL LAB: Sr. No. List of Equipments

1 Digital Turbidimeter Range up to 1000 NTU 2 Jar Test Apparatus 3 COD Reflex Apparatus

18. HYDRAULICS LAB: Sr. No. List of Equipments

1 Raynold's Apparatus 2 Notch Apparatus

19. HARDWARE LAB: Sr. No. List of Equipments

1 Keyboard 2 Monitor 3 Projector 4 Printer 5 Modem 6 Switch 7 CPU 8 UPS 9 SMPS

10 Motherboard

20

20

11 RAM 12 NIC 13 HDD 14 Floppy Drive 15 CD ROM

20. SOFTWARE TESTING LAB: Sr. No. List of Equipments

1 PC(Monitor,Keyboard,CPU,Mouse) with Intel Core2Deo CPU E7400@2.80 GHz Processor,2 GB RAM,160 SATA HDD

2 Projector LCD 3 Operator Chairs 4 Laserjet Printer 5 D Link LAN Switch 6 Other Furniture and 2 AC

21. NETWORK LAB: Sr. No. List of Equipments

1 PC(Monitor,Keyboard,CPU,Mouse) with Intel Core2Deo CPU E7400@2.80 GHz Processor,2 GB RAM,160 SATA HDD

2 Operator Chairs 3 Printer 4 Switch 5 Other Furniture and 2ACs

22. PROGRAMMING LAB:

Sr. No. List of Equipments

1 PC(Monitor,Keyboard,CPU,Mouse) with Intel Core2Deo CPU E7400@2.80 GHz Processor,2 GB RAM,160 SATA HDD

2 Operator Chairs 3 Printer 4 DLink LAN Switch 5 Other Furniture and 2ACs

23. LINUX LAB: Sr. No. List of Equipments

1 Desk top Pcs 2 HP LJ Printer P1108

24. DATABASE LAB: Sr. No. List of Equipments

1 Desktop Optiplex 360 2 Desktop Pcs 3 Switches (1028,24 ports) 4 Desktop Optiplex 330 5 Dot matrix Printer

25. COMMINICATION LAB: Sr. No. List of Equipments

1 PAM Modulation & Demodulation trainer kit 2 PWM Modulation & Demodulation trainer kit 3 PPM Modulation & Demodulation trainer kit 4 PCM Modulation & demodulation trainer kit 5 Delta Modulation & Demodulation trainer kit 6 AM Modulation TRANSMITER KIT 7 AM Demodulation RECEIVER KIT 8 FM Modulation TRANSMITER KIT 9 FM Demodulation RECEIVER KIT

10 Data conditioning & carrier modulation KIT 11 Data conditioning & carrier Demodulation KIT

21

21

12 PAM TD Multiplexing & Demultiplexing KIT 13 Antenna trainer S1189 14 Frequency Division Mux & Demux 15 GDM394 3 &1/2 DMM 16 PCM Modem using A & u law 17 DPCM Modem 18 Adapative delta modulation and Demodulation kit 19 Various line coding 20 DPSk modulation and Demodulation 21 QPSK modulation and Demodulation 22 QAM modulation and Demodulation 23 CDMADSSS modulation and Demodulation 24 FHSS modulation and Demodulation 25 Function Generator 3Mhz 26 GDS 1022 GwInstek 25 Mhz DSO 27 Multioutput DC Power Supply

26. ELECTRICAL LAB: Sr. No. List of Equipments

1 Transformer 1KVA 230/115V with tappings 2 Transformer 1KVA 230/115V without tappings 3 Tachometer Digi KM­2235B 4 Digi Clamp meter 1000A AC/DC 2781­T True rms 5 Earth resistance tester KM­1520 6 Digi Multimeter 207 MK­1 (T) 7 Analog Insulation Resistance Tester KM­81 8 Digi Insulation Resistance Tester KM­ 360 9 DC Ammeter (0­1A)

10 DC Ammeter (0­2.5­5A) 11 DC Ammeter (0­5­10A) 12 DC Ammeter (0­10­20A) 13 DC Voltmeter 0­50V 14 DC Voltmeter 0­150­300V 15 DC Voltmeter 0­250­500V 16 AC Ammeter MI (0­1A) 17 AC Ammeter MI (0­1.5A) 18 AC Ammeter MI (0­2.5A) 19 AC Ammeter MI (0­5A) 20 Ac Voltmeter MI (0­150­300V) 21 Ac Voltmeter MI (0­250­500V) 22 Ac Voltmeter MI (0­150V) 23 Wattameter 0­750W,2.5­5A,250/500V 24 Wattameter 0­1500W,5­10A,300/600V 25 Low Power factor wattmeter 0­1500W,5/10A,250/300/600V 26 Low Power factor wattmeter 0­1500W,5/10A,150/300/600V 27 Rheostat 400 Ω , 1 A 28 Rheostat 100 Ω , 5 A 29 Rheostat 150 Ω, 2 A 30 Rheostat 40 V, 5 A 31 Rheostat 20 Ω, 10 A 32 3­Ph Auto­transformer 33 Rectifier 25KVA 34 Induction Motor (With DOL Starter) 35 D.C. Shunt Machine (With 3 Point Starter) 36 Variable Choke Coil(Inductor)

22

22

37 D.C. Series Motor 38 1­Ph, Loading Inductor 39 Variable Capacitor(1 Ph,230V,10Amp) 40 Variable Capacitor(3 Ph,400V,15Amp) 41 3­phase Variable Load(5KW) 42 3­phase Variable Load(10KW) 43 Lamp Bank 44 Dismantled DC Motor 45 Stepper Motor

27. Electronics Workshop: Sr. No. List of Equipments

1 PCB coater Cum Photoresist dryer 2 Both side exposur 3 Easily etcher 4 Photo circular Saw 5 Chmicals for machines 6 ¾” Stand Drill make with ½ HP motor with 13mm chuck

28. COMPUTER CENTER & HARDWARE LAB: Sr. No. List of Equipments

1 Dell optiplex 330NT intel C20 E4600

29. ANALOG ELECTRONIC LAB: Sr. No. List of Equipments

1 GDS 1022 Gw­ Instek 25 Mhz DSO 2 GDM 394 3 & 1/2 digit DMM 3 Experiment Board 4 LCR­Q meter 5 Plot Frequency response of FET amplifier kit 6 Plot Frequency response and bandwidth of negative amplifier kit 8 Study function of Colpitts oscillator 9 Study RC phase shift Oscillator

10 Study function of RC integrator and Differentiator 11 Study function of Clipping and Clamping Ckt 12 Study function of Astable Multivibrator 13 Study function of Monostable Multivibrator 14 Study function of UJT relaxation Oscillator 15 Study of regulated power supply 16 Study function of Bistable multivibrator 17 3 & 3/4 Pocket type hand held digital multimeter 18 Multioutput DC Power Supply 19 Function Generator with digital Display 20 OPAMP Trainer Kit

30. DIGITAL & MICROCONTROLLER LAB: Sr. No. List of Equipments

1 PIO­OPTO RLY #275 PIO based OPTO relay controller card

2 DYNA­51 #1437 TO #1439 8031/51 based microcontroller trainer with 16X2 LINES LCD display power supply

3 CABLE SET cable set For Dyna­51 order no ­ SOTE10000216/50

4 DYNA ­85­REV­6.0 # 1043 TO # 1050 Low cost intel 8085 microprocessor based trainer kit DYNA­85 ­REV­6.0 with 2 no's of IC 8255 order no ­SOTE09000404

5 CABLE SET cable set order no ­SOTE09000405/20

23

23

6 PIO­ADC #2220 PIO based single channel A to D card 8 PIO­DAC #2698 PIO based D to A converter card 9 Easy­8051B Development System for 8051 Microcontroller order no­ SOTE10000216/10

10 LEAPER­1 Digital IC Tester order no­ SOTE09000405/40

11 LIGHT TO FREQUENCY TSL230BR programmable light to frequency board interfacing with easy 8051B

12 PIO­STEPPER #1886 PIO­ based stepper motor controller card order no­ SOTE09000404 13 PIO­LCI #834 PIO­ based logic interface card order no­ SOTE09000404 14 PIO­RT/TC #315 PIO based thermocouple card 15 PIO­STEPPER #1954 PIO­ based stepper motor controller card interfacing with Dyna­51 16 PIO­RT/TC #325 PIO based thermocouple card interfacing with Dyna­51 17 PIO­LCI #839 PIO­ based logic interface card interfacing with Dyna­51

18 STUDY­TRAFFIC #436 Study card for traffic signal control operation interfacing with Dyna­51

19 STUDY­8279 #1188 Study card for study of 8279 20 STUDY­DCM #726 Study card for DC motor control

21 STUDY­THUMBWHEEL #583 Study card for the study thumbwheel switch interfacing with Dyna­51

22 STUDY­TRAFFIC #447 Study card for traffic signal control operation interfacing with Dyna­51

23 STUDY­8255 #1633 study card for 8255 interfacing with Dyna­51 24 TR­PSU­SMPS01 Power supply SMPS01 for Dyna­85N 25 TR­STP­MOTOR­12V,2Kg 26 TR­PSU­SMPS03 Power supply SMPS03 for interfacing with DCM card 27 TR­PSU­SMPS03 Power supply SMPS03 for interfacing with stepper motor card 28 TR­16X2 LCD 16X2 LCD interfacing with easy 8051B 29 TR­KBD­PS2­SAMWH Samsung PS2 keyboard white with AT converter of LCD kit 30 8051 READY 8051 Ready interfacing with easy 8051B

31. MEASUREMENT & CONTROL LAB: Sr. No. List of Equipments

1 Strain gauge 2 DEAD WEIGHT TESTER 3 Rotameter 4 Ventury tube 5 Orifice plate 6 RTD &Thermocouple setup 7 Calibration setup for temp. measurement using RTD & Thermocouple 8 Tachometer 9 Hygrometer

10 Rotary Encoder 11 LVDT 12 DC position control system 13 AC position control system 14 Potentiometer as a error detector 15 Synchro as aerror detector 16 First order R­C filter­741 17 Second order R­L­C filter­741 18 Temperature controller using on­off controller 19 Temperature controller using PI & PID controller

24

24

20 Synchro Transmitter & Receiver 21 Delta PLC Model No.DVP­14SS211T 22 Delta Analog Module 23 Selectron made PID controller 24 Temperature sensor PT 100 25 Scientech 801c, 30Mhz 2 channel Analog oscilloscope with component tester

26 Scientech 4061, 3Mhz Microcontroller based fucntion generator with 40MHz frequency counter

27 Scientech DM97 3 & 3/4 handheld multimeter 28 Scientech 4077 multiple DC power Supply

32. ADVANCE COMMUNICATION LAB: Sr. No. List of Equipments

1 Klystron Power Supply 2 GSM Mobile Trainer kit 3 Cooling Fan 4 Frequency meter 5 H­plane Tee 6 E­plane Tee 7 Directional Coupler 8 Fix Short 9 E­H plane

10 VSWR meter 11 Dell optiplex 330NT intel C20 E4600 12 Scientech 801c, 30Mhz 2 channel Analog oscilloscope with component tester

33. MACHINE SHOP: Sr. No. List of Equipments

1 Apexcode741mechanics Benchvice 2 3/4" stand drill make with1/2hp motor 3 K.P.T 13mm hand drill 4 K.P.T hand grinder 4" 5 Double ended bench grinder 6 Angle plate 8" 8 Apex code sg731hinged pipe vice 9 Hand shearing machine

10 V block 11 Cut off machine14"(dewag) 12 Gas welding torch 13 Telco make gas cutter 14 Best indian make trolley 15 Malik welding machine 300Amp 16 Malik welding machine 200Amp 17 Trolley for gas tank 18 Sand mixer 19 Best Indian Mack power make lathe 20 Face plate 350mm 21 Carrier plate 150mm 22 3 jaw chuck with back plate 200mm 23 Anti vibration mount 24 Revolving center Mt­3 25 Electrical coolant pump with tank 26 Quick change tool post 27 All geared aut lathe height of center 175mm 28 Anti vibration mount

25

25

29 3jaw chuck with back plate 200mm 30 Face plate 350mm 31 Carrier plate 150mm 32 Quick change tool post 33 Revolving center Mt­3 34 Electrical coolant pump with tank 35 Milling machine Universal 36 Vertical attachment 37 Milling vice 150mm swivel base 38 Anti vibration mount 39 Dividing Head 4 40 Electrical coolant pump with fittings 41 Radial drilling M/c Cap 40mm, 42 Cast iron box table 43 Drill vice 6 44 Drill chuck with 19mm arbor and sleev 45 Anti vibration mount 46 Electrical coolant pump with fittings 47 SMT brand all geared shaping machine 48 Shaping vice 49 Surface grinder 50 Permanent magnetic chuck450x150mm 51 Coolant pump with tank& fittings 52 SMT brand Cylindrical Grinder 53 True 3 jaw chuck size 160mm 54 Oxygen gas cylinder 55 Acetylene gas cylinder 56 Argon gas cylinder 57 Co2 Gas cylinder 58 CO2 welding machine 59 TIG welding machine 60 Oxygen Gas pressure regulator 61 Acetylene pressure regulator 62 Power Hack saw machine 63 Oxy Acetylene Gas Welding torch with tip set 64 Oxy Acetylene gas cutting Torch with tip set 65 Digital weighing machine 66 20KVA spot welding machine

34. AUTOMATION LAB: Sr. No. List of Equipments

1 Mtab make CNC lathe Flex turn 2 Mtab make CNC milling Flex mill

35. MMC LAB: Sr. No. List of Equipments

1 Temperature control using thermal rid switch and bimetal switch 2 Measurement of force and weight using load cell 3 Liquid cevel measurement by using capacitive transducer system

36. CAD/CAM LAB: Sr. No. List of Equipments

1 Desktop Computers 2 Projector 3 Dot matrix Printer

37. TOM LAB: Sr. No. List of Equipments

26

26

1 Models of various governors 2 Models of brakes 3 Models of clutches 4 Models of cams & followers 5 Different mechanisms 6 Dynamometers models 7 Slip &creep of belt drive test rig

38. POWER LAB: Sr. No. List of Equipments

1 Solar plate collector 2 Boiler models 3 Thermal conductivity of solid rod 4 Verification of stefam boltsman law 5 Bomb calorimeter 6 Two stage compressor assly & disassly model 7 Refrigeration test rig 8 Model of window air conditioner

39. FMM LAB: Sr. No. List of Equipments

1 Bourden pressure Gauge 2 Bernoulis theorem 3 Venturi meter 4 Orifice meter 5 Pipe fitting apparatus 6 Pelton Wheel 7 Centrifugal Pump 8 Reciprocating pump 9 Hydraulic trainer

10 Pneumatic trainer COMPUTING FACILITIES:

Sr. No. Particulars Requirements as per Norms Availability

1 No of Computer terminals 210 340

2 Hardware Specification Pentium-IV

Intel Core (TM) 2 Duo CPU E4600, 2.8GHz

3MB Cache, 1066FSB, RAM-1GB, HDD-160GB

3 No of terminals of LAN/WAN ------------- LAN 202

4 Relevant Legal Software Application MS-OFFICE Application MS-OFFICE System Windows System Windows

5 Peripheral(s)/ Printers CANON iR 2525 / 2530 UFRII Lt

6 Internet Accessibility (in kbps & hrs) 56 Kpbs for 12 hours 10Mbps for 24 Hrs. BSNL

Wi-Max Network

List of facilities available: Class Rooms, Tutorial Hall and other Instructional set up available

Particulars Requirement as per norms Available in Institute Class Rooms 21 20

Tutorial Rooms 06 06 Drawing Hall 01 01

Computer Centre 01 01

27

27

Library 01 01 Laboratories 36 36

Total 66 65 Games & sports facilities:

Every academic year the college organizes sports activities under gymkhana & students participate in inter diploma sports (IEDSSA) organized at state level.

Center Examination Facility: Separate examination cell is available in the institute. Total no. of rooms available are 21 each having

capacity 30 students. Teaching Learning process:

Curricula and syllabi for each of the programmes as approved by the MSBTE, as per MSBTE for details visit www.MSBTE.com.

Academic Calendar of the MSBTE available on www.MSBTE.com

Softwares/Design Tools 1. Visual Studio 2. Turbo C 3. Oracle 8.0 4. Microsoft Office 2003/XP/2007 /2010 5.PTC Creo parametric 3.0 6. Autocad 2013

Academic Time Table: Displayed on college notice board. Placement status: TPO section is available through which Placement activities are held. Admission Procedure: As prescribed by DTE 80% through CAP and 20% through

management. Fee Structure: As prescribed by the Shikshan Shulk Samiti. Hostel Facility: 300 capacity for boys & 300 capacity for girls available. Students' assessment of Faculty: Students’ feedback is taken at the end of each semester and performance appraisal

forms are filled by every staff member at the end of each academic year. Confidential reports of staff are

maintained on the basis of students’ feedback/academic result and staff appraisal.

Faculty Profiles:

Sr. No. Name of Employee Designation Qualification

1 Mr. Khatawkar.P.R Principal M.E. Electronics, MBA 2 Mr. Chaudhari J.H. Lecturer in Mech. Engg. (W/S) B.E. Mech. DBM, DSM 3 Dr. Kadam S. D. Lecturer in Chemistry (I/C Head ASH Dept.) M.Sc. M.Phil. Ph.D. 4 Dr. Thakur P. I. Lecturer in English M.A. M.Phil. Ph.D. 5 Mr. Lakal L. M. Lecturer in Mathematics M.Sc. B.Ed 6 Mr. Sawant S. T. Lecturer in Mathematics M.Sc. 7 Mr. Khavale S. V. Lecturer in Physics M.Sc. M.Phil. Ph.D. (Pursuing) 8 Mr. Jagtap A.S. Lecturer in Physics M.Sc. 9 Mr. Londhe R.U. Lecturer in Chemistry M.Sc. NET

10 Mr. Pawar B.N. Lecturer in Physics M.Sc. 11 Mr. Bhamare A.V. Lecturer in English M.A. SET. NET 12 Mr. Shinde S.M. Lecturer in Automobile Engg. (I/C HOD AE) MBA B.E. 13 Mr. Kulkarni M.D. Lecturer in Automobile Engg (Academic Coordinator) M. E.

28

28

14 Mr. Korake S.P. Lecturer in Automobile Engg M.E. 15 Mr. Tamboli.N.B Lecturer in Automobile Engg M.E. 16 Mr. Pawar S.B. Lecturer in Civil Engg. (I/C HOD CE) M.E. 17 Mr. Supekar.M.B Lecturer in Civil Engg. B.E. 18 Mr. Shinde K.S. Lecturer in Civil Engg. (Ad-hoc) B.E. 19 Mr.Nipate K.V. Lecturer in Civil Engg. (Ad-hoc) B.E. 20 Mr.Sarvadnye A.M. Lecturer in Civil Engg. (Ad-hoc) B.E. 21 Mr.Patange S.P. Lecturer in Civil Engg. (Ad-hoc) B.E. 22 Mr. Bhuse S.H. Lecturer in Computer Engg. (I/C HOD CO) B.E. 23 Mr. Bankar H. M. Lecturer in Computer Engg M.E. 24 Mr. Pawar P.R. Lecturer in Computer Engg M.E 25 Mr. Kamble P.S. Lecturer in Computer Engg B.E. 26 Mr. Deokate.S.T Lecturer in Computer Engg B.E. 27 Ms.Khabale N.V. Lecturer in Computer Engg(Ad-hoc) B.E. 28 Mr. Chikane S.K. Lecturer in E& TC Engg. (I/C HOD EJ) M.E. 29 Ms. Taware V.G. Lecturer in E& TC Engg B.E. 30 Mrs. Gore R.R. Lecturer in E& TC Engg B.E. 31 Mr. Gaikwad A.S. Lecturer in E& TC Engg M.E. 32 Mr. Patil.S.S Lecturer in E& TC Engg M.E. 33 Ms. Upase T. L Lecturer in E& TC Engg (Ad-hoc) B.E. 34 Mr. Malave B.V. Lecturer in Mech Engg. (I/C HOD ME) B.E. 35 Mr. Gore R.M. Lecturer in Mechanical Engg B.E. 36 Mr. Sawant D.S. Lecturer in Mechanical Engg B.E. 37 Mr. Waghmare R.M. Lecturer in Mechanical Engg B.E. 38 Mr. Bhujbal.G.V Lecturer in Mechanical Engg B.E. 39 Mr. Jadhav.Y.B Lecturer in Mechanical Engg( I/C TPO) M.E. 40 Mr. Chandanvandan A. R. Librarian M.Sc. M. Lib. SET,NET 41 Mr. Jadhav S .R. Accountant M. Com. 42 Mr. Dhekane M. A. Clerk M. A. 43 Mr.Kumbhar K.P. Clerk B.Com 44 Mr.Kulkarni B.S. Clerk B.Com L.L.B

Date: 01/09/2017

Place: Vidyanagari, Indapur.