manual canon ip190v

Upload: bima-harya

Post on 09-Apr-2018

215 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/8/2019 Manual Canon Ip190v

    1/2

    Start HereEasy Setup Instructions

    1 Unpack the Printer 2 Prepare the Printer 3 Install the Print Head 4 Install the Ink Tanks

    Carefullyremove allitems from the box.

    Documentation andSoftware Kit

    Print Head

    AC Adapter

    Power Cord

    1 Remove the shipping materials from the printer.

    Plug the Power Cord into the AC Adapter. Connect the DCplug to the printer. Plug the Power Cord into a power outlet.

    NOTE:You will need the Serial Number to register the product.

    Liftopen the Paper Supportand TURN THEPRINTER ON. Theprinter will initialize.

    IMPORTANT: Do not open the Print Head Cover before the print-

    er has finished initializing. Wait until the POWER lamp remains

    fully lit.

    After the printer finishes initializing, open the PrintHead

    Cover.

    4

    3

    2

    1 Remove the Print Head from its package.

    Remove the Protective Cap from the PrintHead.

    NOTE: Do not touch the Print Head Nozzles.

    Press in on the LockButton and raise the grayLock Lever.

    Place the PrintHead into the holder byaligning the

    mark with the mark.

    Lower the Lock Lever until it clicks into place.5

    4

    3

    2

    1 Remove the BlackI nkTank(BCI-15 Black) from itspackage,and pulloff the Protective Cap.

    NOTE: To avoid spilling ink, do not touch the bottom of the tank

    once you have removed the Protective Cap.

    Insertthe BlackInkTankinto the backslot aligning themark with the mark.

    Presson the untilthe InkTankclicksinto place.

    IMPORTANT: For correct printer operation, make sure ink tanks

    are secure in slots.

    Repeat the procedure for the Color InkTank(BCI-16 Color),inserting it into the frontslot.

    Close the Print Head Cover.

    NOTE: The printer will perform a Print Head cleaning after thecover is closed. Wait until the process is complete before pro-ceeding.

    5

    4

    3

    2

    1

    Continue with Step 5

    on side two.

    BCI-15 BlackInk Tanks

    BCI-16 ColorInk Tanks

    PIXMA iP90Photo Printer

    Nozzles

    ACAdapter

    DC PlugPower Cord

    Serial Number

    Paper Support

    PaperOutputSlotCover

    Print HeadCover

    Print Head

    Cover

    1 2

    3

    Print Head Cover

    mark

  • 8/8/2019 Manual Canon Ip190v

    2/2

    Wind

    ows

    Macintos

    h

    5 Windows Printer Driver Installation 5 Macintosh Printer Driver Installation

    TURN THE PRINTER OFF.

    Turn the computer on and startWindows.

    NOTE:For Windows XP or Windows 2000, log on to Windows as amember of Administrators group before continuing.

    Close any open software applications including anti-virus,computer security and other software.

    IMPORTANT: If you see the Found New Hardware Wizard,

    click Cancel.

    Insert the "Setup Software & User's Guide" CD-ROM.The setup program should run automatically.

    NOTE: If the setup program does not run automatically, ClickStart, then Run, then type D:/Msetup4.exe, where D is yourCD-ROM drive.

    When the main menu appears, click EasyInstalland followthe on-screen instructions.

    NOTE: Select Easy Install in order to install application soft-ware, electronic manual, utility and printer drivers. SelectCustom Install in order to choose the options you would liketo install.

    When the "Easy Install" window appears, click Install.

    Read the License Agreement, then clickYes to continue.Installation ofthe printer driver and on-screen manualswillbegin.

    6

    5

    4

    3

    2

    1 When the "Printer Connection" window appears, connect theUSB cable to the computer and th e other end to the printer.

    NOTE: When performinginfrared communication,make the IrDA port of eachother's device stand oppo-site to each other. Distancebetween the IrDA portsshould be 31.5 inch (80 cm)or less.

    TURN THEPRINTER ON.

    IMPORTANT: If your computer cannot detect a computer port,

    refer to "Troubleshooting" instructions in the Quick Start Guide.

    Follow the on-screen instructions to install the remaining soft-ware. When the "Installation Results" window appears, clickOK.

    Follow the on-screen instructionsto register your product.

    When the "Installation completed successfully" windowappears, click Exit.

    NOTE: If a message prompting you to restart the computerappears, check the check box and click Restart.

    NOTE: If print quality is not satisfactory after installing the print-er, you may need to align the Print Head. Refer to "Aligning thePrint Head" instructions in the Quick Start Guide.

    11

    10

    9

    8

    7 When the "Easy Install" screen appears, clickInstall.

    Read the License Agreement, then clickYes to continue.Installation ofthe printer driver and on-screen manualswillbegin.

    Follow the on-screen instructions to install the remainingsoftware.

    Follow the on-screen instructionsto register your product.

    When the "Installation completed successfully" screenappears, click Restart.

    After restarting the computer, start Printer Setup Utility(start"PrintCenter" when you use MacOS X V10.2.x) andthen checkthat the name of the printer you wantto use isshown in "Printer List". Ifthe printer name is not displayed,

    presstheAdd button to add the printer.For more detailed instructions, refer to the Macon-lineHelp.

    NOTE: If print quality is not satisfactory after installing theprinter, you may need to align the Print Head. Refer to"Aligning the Print Head" instructions in the Quick StartGuide.

    12

    11

    10

    9

    8

    7NOTE: The screens below refer to Mac OS X v. 10. 3. x installa-tion. Screens may differ depending on the operating system youare using.

    Connect the end of the USB cable to the computer, the other tothe printer.

    Turn on your Mac.

    Insert the "Setup Software & User's Guide" CD-ROM.

    NOTE: If the CD-ROM folder does not open automatically,double-click the CD-ROM icon on the desktop.

    Double-clickthe Setup icon.

    When the "Authenticate" screen appears, enter your adminis-trator name and password.If you do notknow your administrator name or password, click

    , then follow the on-screen instructions.

    When the main menu appears, click EasyInstalland follow on-screen instructions.

    NOTE: Select Easy Install in order to install application software,electronic manual, utility and printer drivers. Select CustomInstall in order to choose the options you would like to install.

    6

    5

    4

    3

    2

    1

    Part no. QT5-0847-V01 2007 Canon Inc. Canon and BCI are registered trademarks and PIXMA is a trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. Printed in Vietnam.