manual de servicio haier l42f6
TRANSCRIPT
-
7/26/2019 manual de servicio haier l42f6
1/31
LCD TV
OWNER'S MANUALMODEL: L32F6/L42F6
Please READ this manual carefully before
operating your TV, and retain it for future
reference
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
2/31
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
3/311
Know these safety symbols
This bolt of lightning indicates uninsulated material within your unit may cause anelectrical shock. For the safety of everyone in your household, please do not removeproduct covering.
The exclamation point calls attention to features for which you should read theenclosed literature closely to prevent operating and maintenance problems.
placed on this apparatus.CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
local regulations.
WARNING : To reduce the risk of fire or electric shock, this apparatus should not beexposed to rain or moisture and objects filled with liquids, such as vases, should not be
Please be sure to dispose of this set in accordance with all state and
End of life directives - Recycling
companies can dismantle and recycle this set. This will minimize the amount of materials being disposed of.
for new uses. At the end of it s life,specializedYour new TV contains several materials that can be recycled
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
4/312
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings.
Install in accordance with the manufacturers instructions.
Do not Install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
Do not defeat the safe ty purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and third grounding prong. The wide blade or third
prong are provided for your safety. When the provided
for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles , and the
point where they exit from the apparatus.
manufacturer.
Use only with a cart, stand, tripod, bracket, or
the apparatus. When a cart is used. Use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, li quid
has been spilled or objects have fallen into apparatus, t he
apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Damage Requiring Service- The appliance should be
A. The power supply cord or the plug has been damaged;
B. Objects have fallen, or liquid has been spilled into the
appliance;
C. The appliance has been exposed to rain
D. The appliance does not appear to operate normally or
exhibits a marked change in performance;
E. The appliance has been dropped, or the enclosure
damaged.
Tilt/Stability- All televisions must comply with
recommended international global safety standards for
tilt and stability properties of its cabinet design.
applying excessive pull force to the front , or top, of
the cabinet which could ultimately overturn the
product.
placing electronic equipment/toys on the top of the
cabinet. Such items could unsuspectingly fall from
the top of the set and cause product damage and/or
personal injury.
Wall or Ceiling Mounting- The appliance should be
mounted to a wall or ceil ing only as recommended by
the manufacturer.
Power Lines- An outdoor antenna should be located
away from power lines.
Outdoor AntennaGrounding- If an outside anten-
na is connected to the receiver, be sure the antenna
system is grounded so as to provide some protection
against voltage surges and built up static charges.
Object and Liquid Entry- Care should be taken so
that objects do not fall and liquids are not spilled into
the enclosure through openings.
Battery Usage CAUTION- To prevent battery
leakage that may result i n bodily injury, property dam-
age, or damage to the unit:
marked on the unit.
alkaline, etc.).
long time.
For ventilation, leave at least 4 to 6 free all around
the TV. Do not place the TV on a carpet.
The equipment shall not be exposed to dripping or
splashing.
The equipment shall not be exposed to rain or mois-
be placed on the apparatus.
The apparatus must be connected to a mains socket
outlet with a protected earthed connection.
The appliance coupler is used as the disconnect device
of this apparatus, the disconnect device shall remain
readily operable.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
amplifiers) that produce heat.
plug does not fit into your outlet, consult an electrician
Only use attachments/accessories specified by the
table specified by the manufacturer, or sold with
Refer all servicing to qualified service personnel. Servicing
serviced by qualified service personnel when:
ture and objects filled with liquids, such as vases, shall
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
5/313
ADDITIONAL SAFETY PRECAUTIONS
Ensure that LCD TV stand is tightened properly to the set on the right way of tightening of
the screw of the stand to the set. Improper tightening of screw may render the set unsafe.
If LCD TV is Installed on the wall, Installation should be carried out by qualified servicemen. Improper or incorrect
Installation may render the set unsafe.
Disconnect main plug when : cleaning the TV screen, never use abrasive cleaning agents .
there is a l ightning storm.
the set is left unattended for a prolonged period of time.
Do not shift or move the LCD TV around when it is powered on.
Do not touch, push or rub the surface of the LCD screen with any sharp or hard objects.
When the surface of the LCD screen becomes dusty, wipe it gently with an absorbent cotton cloth or
other soft material like chamois. DO NOT USE acetone, toluene or alcohol to clean the surface of the screen.
These chemicals will cause damage to the surface.
Wipe off water or saliva as soon as possible. These liquids can cause deformation and color fading of the
LCD screen when left exposed for some time.
Be careful of condensation when temperature changes occur. Condensat ion can cause damage to the LCD
screen and electrically part s. After condensation fades, spots or blemishes will be present on the LCD screen.
POSITIONING THE LCD TELEVISION
Place the LCD TV on a solid, sturdy base or stand. Be sure the stand is strong enough to handle the weight of
the LCD TV.
Try to leave at least 6 of space around each side of the LCD TV cabinet to allow for proper ventilation.
Do not place the LCD TV near a radiator or other sources of heat.
Do not place the LCD TV where it can be exposed to rain or excessive moisture.
RECYCLING PROCEDURE/END OF LIFE DISPOSAL
To minimize harm to the environment, the batteries supplied with the LCD TV do not contain mercury or
nickel cadmium. If possible, when disposing of batteries, use recycling means available in your area.
The LCD TV uses materials that can be recycled. To minimize the amount of waste in the environment, check
your area for companies that wi ll recover used televisions for dismant ling and collection of reusable mater ials,
or contact your dealer for TV recycling tips.
Please dispose of the carton and packing material through the proper waste disposal management in yourarea.
Precaution
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
6/314
Contents
Guide for Preparatory Work
IMPORTANT SAFETY INSTRUCTIONS .................................................. 2
Read before operating equipment ............................................................ 2Precaution ................................................................................................. 3
Panel control and rear terminal control ..................................................... 5
Preparation of remote control ................................................................... 7
Descriptions of remote control function .................................................... 8
Connection and preparation of the TV set ................................................ 9
Backboard singal source interfaces ........................................................ 10
Side signal source interfaces ...................................................................11
Preset and watch TV
Power On/Off .......................................................................................... 12
Selecting input signal for TV program ..................................................... 12
Using Menu functions
Menu operation ....................................................................................... 13
PICTURE MENU .................................................................................... 14
AUDIO MENU ......................................................................................... 15
FEATURE MENU .................................................................................... 15
INSTALLATION MENU ........................................................................... 16
VGA MENU ............................................................................................. 17
Multimedia feature setting(USB) ............................................................. 18
Establish and use the channel favorite list .............................................. 19
Others
Troubleshooting ...................................................................................... 20
Glossary .................................................................................................. 21
Care And Cleaning .................................................................................. 22
Product specications ............................................................................. 23
** Due to the product improvement, the screen display and illustrationsmay differ from the actual ones.
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
7/315
Explanations:The following illustration is for your convenience to recognize where all terminals are
located and to connect peripheral equipment; due to the product improvement, the
indications may be different from the actual one. The actual indications shall prevail.
Side control panelSide control panel
6
2
3
4
1
5
Explanations on the keys on the side of the TV set and theirfunctions
1 INPUT:Press to select the input source,then Press VOL+ or the ok of RC to
change the input source; while in standby mode, the input may be
used to turn on the TV set.
2 MENU:Press to open or exit the on-screen menu.
3 VOL+/-:
In TV mode: Press to increase (+) or decrease (-) the volume;
In TV menu: Move right (+) or move left (-) in the options.
4 CH+/-:
In TV mode: Press to increase (+) or decrease (-)the channel number ;
In TV menu: Move up (+) and down (-) in the options; while in standbymode, the
Channel +/- may be used to turn on the TV set.
5 POWER:Press to turn on / off (standby) the TV set.
6 : Switch it on before use TV.
Panel control and rear terminal control
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
8/316
Side and rear terminals
541
7 6
32
98 107
VIDEOLR
AV IN 2
USB
HDMI 3
Explanations on the rear terminals and their functions:
1 COMPONENT: Color aberration component (YCbCr, YPbPr) Video/
Audio Input Terminal
2 AUDIO IN: VGA audio input terminal
3 PC IN: VGA video input terminal
4 AV IN 1: AV IN 1 audio/video input terminal
5 AV OUT: AV audio/video output terminal
TV ANTENNA: Antenna input terminal
HDMI1/HDMI2/HDMI3 input terminal
AV IN 2: AV IN 2 audio/video input terminal
Earphone output socket
USB
Panel control and rear terminal control
32
6
7
8
9
10
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
9/317
Preparation of remote control
Installation of remote control batteries
As shown in the following diagram, put the remote control upside down and push open thebattery chamber.
Insert 2 AAA batteries as shown in the following diagram.(The positive and negative polesmust correspond to the indication).
Put back the battery chamber cover in place.
31 2
Never use rechargeable batteries, such as nickel-cadmium batteries.Suchbatteries are different in shape and performance, proper operation is thereforehard to be ensured.Please properly dispose the waste batteries in a environmentally friendly way.
Precautions for the use of batteries:Improper use of batteries may cause battery leakage, which may corrode the remote controlor cause battery explosion.The following precautions must be obeyed:Always replace batteries in pairs, i.e. replace a pair of old batteries with a pair of new
ones.Never use a new batteries together with an old one.Never use batteries of different types together, e.g. use a "zinc carbonate" battery together
with an "alkaline" battery.Never recharge, short circuit, reassemble, heat or burn used batteries.It is necessary to change batteries only when the remote control operates well or bad
occasionally or fails to control the operation of the TV set.If you don't use the remote control for a long period, take the batteries out of the remote
control so as not to cause battery leakage thus damaging the remote control.
Precautions while using remote controlEnsure no other objects are between the remotecontrol and the remote receiver of the TV set.
The remote control can not be kept in hot orhumid environment, otherwise violent impactmay cause the remote control failure.
Sunlight or other strong light may interfere
the signal sent by the remote control.In this
case, please turn the TV set towards the other
direction.
Use two AAA (7#) 1.5V alkaline batteries. Donot use different types of batteries together.Mount the batteries as per correct polarity.
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
10/318
Descriptions of remote control function
Using remote control
?
SCAN
F REEZ E P .M ODE S.M ODE ARC
H.LOCK
SOURCE
OK
DISPLAY
USB BACK
REC
REV FWD PREV NEXT
TEXT MIX SUBCODE HOLD
PIP SWAP MOVE ZOOM
TIMESHIFT PLAY/PAUSE HELP
INDEX
SLEEP FAVORITE
HDMI
/
KEY Introduction
POWER Press to turn on/off the TV.
HDMI Press to choose HDMI source mode.
FREEZE Freeze or unfreeze a piece of screen.
P.Mode Press to choose the Auto picture Mode.
S.Mode Press to choose the Auto sound Mode.
SLEEPPress to set sleep timer, setting amount of time beforeyour TV turn off automatically.
I/IISwitch stereo or mono mode in Stereo program, selectDual I or Dual II in dual language program.
0-9 Press to enter TV channel number to select channel.
RECALLPress to display the previous channel or source, orreturn the previous menu when the menu is displaying.
VOL+/- Press + or - to adjust the volume.
SOURCE The Source List should be activated and show on OSD.
MUTE Switch the sound ON/OFF.CH / V Press or V to browse through the TV channels.
/
/ /
Press the keys to navigate OSD menu.
OK1. Press button to activate the setting/selection of OSD.2. Press to return previous level.
MENU1. Press to activate OSD menu or back to previous
level of OSD.2. Exit OSD.
USB Press to choose USB source mode.
PLAY/PAUSE Start or stop a Music/picture/video of playing.
REV Fast Reverse(only for USB).
FWD Fast Forward(only for USB).
PREV Select previous Music/picture/video (only for USB).
NEXT Select next Music/picture/video (only for USB).ARC Press this key to select the screen display proportion.
Display Display or close the current input source information.
EXIT Exit current menu.
SCAN No available
ZOOM No available
H.LOCK No available
FAVORITE No avai lable
BACK No available
REC No available
TIMESHIFT No available
HELP No available
TEXT No available
MIX No available
SUBCODE No available
HOLD No available
PIP No available
SWAP No available
MOVE No available
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
11/319
Connection and preparation of the TV set
Mounting the seat
Take the TV set and its seat out of the carton, and assemble them with
the screws in the accessory box as shown in the following diagram:
1. Put the TV set on the soft cloth or cushion on the desktop with the
face downwards.Place the seat on a secure plane surface.
2. Insert the seat into the clipgroove on the bottom of the TV set.
3. Attach the screws into the seat and screw them down.
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
12/3110
Backboard singal source interfaces
There are a lot of signal sources that can be connected to your TV set. Thefollowing diagram shows how to connect them.
Friendly tips:
If you want to hang the TV set on a wall, all connecting lines must be inserted
into the ports of the TV set in advance.Whenever a peripheral equipment is connected to the TV set, be sure the TVset is powered off.
While connecting peripheral equipment, connect the cable to the terminal withthe same color as its own.
HDMI 2
COMPONENT
HDMI 1
AUDIO
IN
PC IN
Y Pb Pr L L
AV OUT
VIDEO
VIDEO
AV IN 1
L
R
R
R
TV
ANTENNA
Antenna input:
Insert the antenna terminal into the TV set's antenna socket. This socket is a75 coaxial cable input.
AV IN 1 input:
Connect the VIDEO outputs of DVD player, LCD player, video recorder orvideo camera, etc. to the VIDEO input of the TV set.
Audio input: Connect the audio signal source (PC, DVD player, LCD player,video recorder or video camera, etc.) to the audio input port.
AV output :
This interface can be used to output the TV signal of the unit to another TVset.
Component input:
Connect the audio / video of the component signal source (PC, DVD player,
LCD player, video recorder or video camera, etc.) to the component signalinput port.
PC signal and PC audio input:
Connect the PC signal line to the PC and the PC interface of the TV set.
Connect the audio line to the PC audio input interface of a PC or a TV set.
HDMI:
It refers to "high denitiion multimedia interface". It connects the HDMI signalconnecting line to DVD player, etc.
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
13/3111
Side signal source interfaces
VIDEOLR
AV IN 2
USB
HDMI 3
Earphone socket:
The user may use the earphone via the earphone socket.
AV IN 2input:
Connect the VIDEO outputs of DVD player, LCD player, video
recorder or video camera, etc. to the VIDEO input of the TV set.
Audio input:
Connect the audio signal source (PC, DVD player, LCD player,
video recorder or video camera, etc.) to the audio input port.
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
14/3112
Preset and watch TV
The following is how to use the On/Off key ( ) on the TV remote control to turn on/off the TV set. (Press the key Channel +/- in standby mode may power on the unit,its the same for the side panel and the remote control.
Power On/Off
1. While switching on the AC power supply, the red indicator lamp stands for standbymode, while no indicator lamp stands for power on and switch off.
2. If the TV set is in standby mode, press the On/Off key on the remote control topower on.
3. Pressing on the On/Off key on the remote control may enter standby mode again.
4. If you don't use the TV set for a long period, unplug the power cord of the TV setfrom the socket to save electric energy, because the TV set consumes electricityeven in standby mode.
Selecting input signal for TV programIf the TV set is not in the TV mode, the following methods may be used to select TVprogram:
1. Press source key on the remotecontrol to pop out signal source menuon the TV screen (as shown in the rightdiagram).
Press the / key and SOURCE key toselect the option TV, and then press >key or OK key to conrm switching to TVinput terminal. After such switching, thesignal source selection menu disappears,and the information on the current signalsource is displayed on the up right corner
of the screen. If no other operationsare made, the signal source menu willdisappear in nearly 5 seconds.
2. Pressing the CH/V key or number key may also return toTV mode.
How to select TV programSelecting TV program1. Selecting with number key directly
Press the number key directly to select the desired numberof channel.
2. Selecting with the CH/V key Press CH key to select the channel number in the
increasing direction.
Press CHV key to select the channel number in thedecreasing direction.
Selecting TV volumePress the VOL+/- key to adjust to the desired volume.
?
SCAN
F RE EZ E P .M OD E S . MO DE A RC
H.LOCK
SOURCE
OK
DISPLAY
USB BACK
REC
REV FWD PREV NEXT
TEXT MIX SUBCODE HOLD
PIP SWAP MOVE ZOOM
TIMESHIFT PLAY/PAUSE HELP
INDEX
SLEEP FAVORITE
HDMI
/
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
15/3113
Menu operation
TO USE THE MENU
1. Press the Menu key to display the main menu.
2.
3. Press (right) or OK key to enter the sub-menu, to start or adjust the
selected function item.4. Press Menu button to return to previous menu or to exit.
5.
Picture: Adjust picture parameter setting.
Audio: Adjust audio parameter setting.
Features: Set different functions, timerTV-locketc.
Installation: Setting OSD language, channel search, TV reset to factory
setting, etc.
Use / key to select the function item that needs to be adjusted.
Press (left) key to return to previous menu.
Source Menu
1. Press Source key to display Source Menu, and re-press the button
to change input source.
2.
3. Press (right) or OK key for entry.
Press / (up/down) key to select input source.
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
16/3114
PICTURE MENU
1. Auto Picture: Select smart picture modes, if you select modes except personal mode,
the preset value will apply to those items: Contrast, brightness, colour, tint, sharpness,
noise reduction, Color Temp, dynamic contrast, dynamic backlight, color enhancement, etc.
2. Contrast: Adjust black and white level for
picture, for suitable contrast makes
picture clear and bright.3. Brightness: Video brightness adjustment,
usually used together with contrast.
4. Colour: Video color saturation adjustment.
5. Tint: Video tint adjustment.
6. Sharpness: Video sharpness adjustment.
Auto picture
Contrast
Brightness
Colour
Sharpness
Noise reduction
Color Temp Normal
Personal
100
100
50
4
Medium
Move Select Exit
Picture
7. Noise reduction: Video noise signal reduction.
8. Color Temp: Provide different color temperature modes.
9. (Advanced Pic): Adjust picture appearance to the best contrast, color and sharpness
through digital method.
Dynamic contrast: Auto-enhance video contrast.
Dynamic backlight: Adjust backlight to get the best visual effect according to
brightness.
Colour enhancement: Make color much brighter and clearer in detail.
10. Picture format: Switch the picture proportion.
Notes: 1. Some picture settings would not be available or some items would show
differently due to different signal.
2. When the source is HDMI, there would be a item named PC MODE in
Picture page, and the HDMI picture mode could be selected throught the item.
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
17/3115
AUDIO MENU
1. Auto sound: Select audio mode. If you select modes except
personal mode, the preset value will apply to those items:
bass, treble, surround, auto volume, etc.
2. Bass : Bass tone adjustment.
3. Treble : Treble tone adjustment.
4. Volume : Audio volume adjustment.5. Balance: Adjust audio balance of speakers.
6. (Dual I/II) : Select Dual I or Dual II.
7. (Mono/Stereo)Select mono or stereo.
8. Surround : Turn on/off Surround.
9. Headphone volume : Headphone volume adjustment.
10. Auto volume : Adjust volume automatically.
11. Delta volume : Balance volume differentia between channels.
Notes : Some audio settings would not be available due to
different signal.
FEATURE MENU
1. Sleep timer : TV sleep timer setting. If you
set sleep timer to be 0 minutes,
the sleep timer is off.2. TV Time :
After you press TV Time into
sub-menu, press / / / key
and then press OKkey to confirm.
Display current time:
Press Menukey to exit main menu and press OK key;
Select TV Time and press OK or key, and current TV
time will show on top right corner of the screen.
3. On Timer :You can turn on TV and switch to appointed channel from standby
mode automatically at the appointed time with setting on timer.
Activate: Set Daily, Once, Off and other items.While select Off, you
can turn off On timer, and now only activate item is available.
Please set TV Time before you activate On timer.
Time: Set timing time.
Channel No.: Set input source or channel for timing switch.
4. TV Lock : Lock or unlock all channels and devices. After entering TV lock sub-menu,
press / key to select lock or unlock and press OK key.
5. Set code : Set or modify password. Before entering TV Lock sub-menu, user has to key
in the password first (the default password is: 8888) or to set a new password.
If the password is valid, a new dialog box will guide you to finish the operation.
Notes : TV Lock will work only when you restart TV.
and number key to input time
Auto sound
Bass
Treble
Volume
Balance
Surround
Headphone volume
Standard
0
0
1
0
Off
30
Move Select Exit
Audio
Sleep timer
TV Time
On timer
TV lock
Set code
0
Activate
Unlock
Move Select Exit
Features
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
18/31
-
7/26/2019 manual de servicio haier l42f6
19/3117
VGA MENU
(The following settings only apply to VGA mode.)
3. Channel Swap:
Channel exchange action.
Factory settings: To restore factory settings of TV.
1. PIP: Turn on/off PIP.2. PIP Source: Choose video source for PIP.
3. PIP Sound: Choose sound source for PIP.
4. Phase: Adjust signal phase.
5. PC Clock: Adjust signal clock .
6. Auto Adjust: Adjust the signal settings automatically.
7. Reset: Reset part of computer settings.
Notes: Some items are only available for TV in signal
condition. PIP are also available when HDMI input DVI
signal.
Channel number: Use together with Store new channel to preset the serial number of
the new channel.
Fine-tune:Use to change the channels frequency.
Operation steps as follows:
Press or OK to enter fine-tune sub-menu.
Press / to adjust frequency, and press OK key to confirm.
Press / to select store current channel or store new channel.
Press OK key to pop-up new menu, and press / key to decide whether to
store the channel or not.
Store current channel: Store the current modification to current channel.
Store new channel: Store the current modification to current channel and store it in the
definite channel.
Menu, then press / key to decide whether to skip current channel or
not. When one channel is skipped, this channel will not be available by
pressing remote control CH / key but could be available by pressing
relevant number.
Skip channel: Press / key to select, and press OK" or key to enter skip channel
Current Channel: TV current channel, and the channel can be switched.
Target Channel: Channel to be exchanged, and the channel can be switched.
Swap
7.6. Local updates: Use to update software.
.hctiwsdnanoitisops''lebal-EteS.pohsotseilppaylnO
4. Preferences:
Location: Optimize TV Settings to fit your location: H me or Shop.
Volume bar: Hide or show volume bar when volume adjusting.
E-label '
5. Current software: Shows software version.
VGA setting in Picture menu:
1. H.Position: Picture horizontal position adjustment.
2. V.Position: Picture vertical position adjustment.
VGA setting in Features menu:
o
Contrast
Brightness
Color Temp
Picture format
H.Position
V.Position
40
100
Warm
Wide screen
-50
-50
Move Select Exit
Picture
PIP
PIP Source TV
PIP Sound
Sleep timer
TV Time
Off
VGA
0
Move Select Exit
Features
On timer Activate
TV lock Unlock
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
20/3118
Multimedia feature setting (USB)
You could get music, picture, and video document from USB
devices through the TV. Operation steps as follows:
1. Press Source key.
2. Choose USB to show multimedia menu.
3. Press / key to choose USB devices.
4. Press / key to choose browse way.
5. After entering menu, press / key to select music/ picture/ video page.
6.
Remarks:
1. USB interface of digital multimedia player is not all-purpose. So when some USB devices could
not be recognized, the problem is always not the model malfunction but due to device driver.
2. Because USB devices and memory capability are different, the time needs for multimedia player
to read information are also different. So the information reading speed of the player temporarily
getting slow are not the model malfunction.
3. The voltage supplied to USB interface is 5V, and the most electrical current is 500mA. When some
interface criteria of USB devices are different from standard USB protocol, digital multimedia player
may be unable to recognize USB devices correctly, which is normal.
4. USB could be used as an interface to update software.
5. If some files source could not play because of the parameter decoding-limited problem, the problem is not the model malfunction.
6. The system only applies to memory medium with FAT32 format.
Press / / / key to select target file and press OK to play.
Choose USB Stick
None
File BrowseCategory Browse
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
21/3119
Establish and use the channel favorite list
You could establish your favorite TV channel and broadcasting station list, so
that you could find these channels easily.
Notes:
You are able to establish and store at most four favorite lists.
Choose favorite list
Add channel to Favorite list
1. While watching TV, switch to the channel you
would like to add to favorite list.
2. Press OK to show channel option menu.
3. Press / key to select Mark as favorite .
4. Press OK or key to show favorite list.
5. Press / to select favorite list you would like
to add new channel.
6. Press OK key to finally add channel to the
favorite list.
Move channel from favorite listNotes: Please select favorite list of the channel before
you move the channel away.
In addition, in channel option menu, Rename channel has the function
to rename the current channel; Lock channel has the function to lock
the current channel.
1. While watching TV, press OK to show channel option menu;
2. Press OK to choose Show favorite ch. and you will find favorite list;
3. Press / key to select favorite list;
4. Press OK to show favorite channel in the list.
1. While watching TV, press OK key to show channel option menu.
2. Press OK to choose Show favorite ch.
3. Press / key to select favorite list and press OK for entry.
4. Press / key to select the channel you would like to move the
channel away from the list.
5. Press OK to choose.
6. Press OK again to show channel option menu.7. Press / key to choose Unmark as fav.
Favorites 2
Favorites 3
Favorites 4
Favorites 1
Mark as favourite
Rename channel
Lock channel
TV Time
Show favorite ch.
Mark as favourite
Rename channel
Lock channel
TV Time
Show favorite ch.
Mark as favourite
Unmark as fav.
Rename channel
Lock channel
TV Time
Show favorite ch.
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
22/3120
Symptoms Items to Check and Actions to follow
Ghost or double
images
Using a highly directional antenna may improve the picture.
No power
and turn on the television again.
No picture
No picture and power
switched on
clearance around the vent s of the device to be certain there are no blocking walls or
cabinets which would limit the air ow.
Picture position
adjustment
will need to be adjusted.
No photo, music orvideo play or in poor
quality only
No sound
operation and does not indicate a malfunction.
Good sound but poor
color or no picture
Snowish picture andnoise
Television not
responding to
remote control
Control of accessory
devices
PC modes do not
work
Standby
After improper
shutdown TV again will take a longer time than usual.
Miscellaneous See Extras, Specifications on this user manual.
Most High Definition receiver boxes also have picture-positioning controls in their menu systems. If the
TV cursor controls run out of range before the picture is correctly positioned, the receiver box controls
within a radius of approximately four feet.
replace the batteries of the remote control of other devices. E.g. keep away a wireless headphone from
If your TV has been shutdown in an improper way (e.g. power drop, power cord plug out), starting up the
Your TV consumes energy less than 1w in the standby mode.
Troubleshooting
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
23/3121
Glossary
Aspect Ratio The ratio between the width and height of the TV picture on the screen. In a normal TV set the aspect
ratio is 4 to 3 (4:3). The new aspect ratio in HDTV is 16:9 which resembles the aspect ratio in a movie
theatre (Widescreen). New TV systems support both 4:3 and 16:9 aspect ratio and can automatically
switch between them.
Audio Video (A/V) A term often used when discussing a channel on a TV receiver or on video equipment, which has been
especially designed to accept VCR audio-video signals. This channel automatically activates special cir-
cuitry within the TV set to prevent picture distort ion and skewing. It is also used for audio-video proces-sors, which handle both types of signals.
CVBS Composi te Video Baseband S igna l. In broadcast te levi sion th is re fers to the v ideo signal , inc luding the
colour information and syncs.
Component Video
Input (Y Pb Pr)
Component Video Input is a type of connection that uses a cinch-type connector to allow set top boxes
or analog DVD players to connect a signal to the TV. By offering the cinch-type input (YPbPr) the pri-
mary colors, red, green and blue are connected from a set top box directly into the TV allowing for the
signal to display on the screen.
HDTV
resolution of todays NTSC TV, which essentially makes the picture twice as sharp. HDTV also has a
screen ratio of 16:9 as compared with most of todays TV screens, which have a screen ratio of 4:3.
HDTV offers reduced motion artifacts (i.e. ghosting, dot crawl).
Progressive Scan In Progressive Scanning all the horizontal scan lines are scanned on to the screen at one time. The HDTVStandards accept both Interlaced Scan and Progressive Scan broadcast and display methods.
Resolution
may be expressed as number of pixels in an image; or more commonly, As total number of (horizontally
scanned) Lines used to create the image.
Standard Digital TV Resolutions:
SDTV: 576i - The picture is 720x576 pixels, 576p - The picture is 720x576 pixels.
HDTV: 720p - The picture is 1280x720 pixels, 1080 i/p - The picture is 1920x1080 pixels,
The generally agreed upon de finition of HDTV is approximately twice the vertical and horizontal picture
Resolution: A measurement of the finest (smallest) detail that is visible in a video image. TV Resolutions
(AV Video)
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
24/3122
WARNINGconcerning stationary images on the TV
of the LCD panel. Normal use of the TV should involve viewing of programs that have constantly moving
or changing images. Do not leave moving images on screen for extended periods of time. Do not display
the same images too frequently; if you do, subtle ghost images can be left on the LCD screen. Sources of
stationary images may be Laser discs, video games, Compact Discs Interactive (CD-i), paused Digital VideoDiscs (DVDs) or video tapes.
Here are some common examples of stationary images:
movie is viewed on a TV with standard (4:3) aspect ratio. This occurs with some DVDs.
graphics are less likely to damage the picture tube.
news.
These usually appear in the same location on the TV screen.
TV Location
the TV where temperatures can become excessively hot -- for example, in direct sunlight or near a
heating appliance.
Cleaning
or using anything abrasive. Do not use household cleaners. Wipe the screen with a clean cloth dampened
with water. Use even, easy, vertical strokes when cleaning.
blemish the cabinet.
Care And Cleaning
Screen: Do not leave fixed images on the screen for extended periods of time. This can cause uneven aging
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
25/3123
Product specifcations
FunctionPC input function,Support TV, AV(CVBS),Component(YPbPr), HDMI inputs, USB
input,Earphone Output function.
Item L32F6 L42F6
TV function TV standardColor system: PAL/NTSC/SECAMSound system: B/G, I, D/K, M
Video input
Rear connector
COMPONENTx1
AVx1
HDMIx2
Side connectorHDMIx1
AVx1
Video output Rear connector AVx1
PC input Rear connector PCx1
AUDIO INx1
Audio outputAudio output:L/R
Speaker (built-in): 2 x 10W
For stereo earphone mini socket
Power supply
Power supply 100-240V~, 50-60Hz
Power consumption
-
7/26/2019 manual de servicio haier l42f6
26/3124
Product specifcations
This unit supports COMPONENT(YPbPr) formats:
SN Signal format Refresh frequency (Hz)
1 480i/480p 602 576i/576p 50
3 720p 50/60
4 1080i 50/60
Input format of supported PC interface:
Number ResolutionRefresh frequency
(Hz)
1 640*480 60
2 640*480 75
3 720*400 70
4 800*600 56
5 800*600 60
6 800*600 72
7 800*600 75
8 1024*768 60
9 1024*768 70
10 1024*768 75
111360*768
(recommended)60
12
1920*1080
(only for L42F6) 60
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
27/31
Product specifcations
Input format of supported HDMI interface:
SN Name of signalRefresh frequency
(Hz)1 480i/480p 60
2 576i/576p 50
3 720p 50/60
4 1080i/1080p 50/60
5 720*400 70
6 640*480 60/75
7 800*600 56/60/72/75
8 1024*768 60/70/75
9 1360*768 60
26loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
28/31
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
29/31
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
30/31
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
7/26/2019 manual de servicio haier l42f6
31/31