manual for greenhouse strong
TRANSCRIPT
2
! Perform assembling and operation of the greenhouse in strict accordance with the manual and operating rules stated in the technical certificate. Please keep this technical certificate for further reference.
TECHNICAL CERTIFICATE
Description
Greenhouse STRONG is designed for creation microclimate favorable for growing garden crops on cottage andhousehold plots.
Greenhouse might have variable length depending on customers’ desire. Required length of green house is provided by purchasing of packages with extending inserts. Each insert add 2 m to base length. Base length is 4 m. Height of installed frame is 2.1 m
The frame of the greenhouse is made of galvanized iron and is to be assembled with screws and nuts. Greenhouse is fixed on the ground by digging special frame endings or on fundament using angles. Complete set includes all that is needed for fastening of coverage. Greenhouse may be completed with coverage on buyer’s request. Greenhouse has two door openings and two small windows in opposite ends.
Greenhouse base requires 3 sheets of cellular polycarbonate 2.1х6 m with 4 mm thickness. For each
Inserts - 1 sheet of cellular polycarbonate 2.1х6 m
Operation rules
Before the start of operation, the greenhouse should be assembled and installed as prescribed in the manual. When the greenhouse is assembled by a third party the customer should supervise the quality of works to ensure compliance with the present manual. Some detail have extra holes due to uniformity of details. During assembly, be careful not to damage the parts, because until they assembled fully, they do not have sufficient rigidity. Use supports (e.g., chairs) at intermediate stages of assembly to evenly raise the assembled frame. To align the holes in difficult joints use a nail with a diameter of 4mm or mandrel with a conical end. During assembly of the frame details’ connections should be Implemented for all specified openings. Simplified connection of the parts is a violation of assembly rules and cause of removal warranty support by manufacturer.
Do not install the greenhouse too close to buildings or trees where masses of snow/ ice can fall on it. Recommended distance is at least 2 m. The greenhouse is designed to withstand wind at the speed below 24 m/sec. The greenhouse cladding should not be removed for the winter period if snow load is limited. If the greenhouse is left unattended for the entire winter the customer should either remove the cladding or estimate the possible snow load. For the frame assembled with all parts including strainers and braces, the maximal snow load begins when the layer of snow weight is 180 kg per 1 sqm of horizontal surface, which corresponds to regulative snow load of IV snow region (in accordance with Classification of Building rules and regulation 2/01/07-85 «Workload and impacts»). For the greenhouse which was installed according to the rules, manufacturer guarantee sufficient strength against snow load in the following areas: Northern areas in Russia, the Scandinaviancountries: Finland, Sweden, Norway, Denmark.
Cleaning and washing sheets of polycarbonate
1. Rinse the sheet with warm water.
2. Wash the sheet with a solution of mild soap or with a household detergent and warm water, using a soft rag ora sponge to remove dirt.
3. Rinse with cold water and wipe with a soft cloth.
Never use abrasives or highly alkaline cleaning compositions for cleaning polycarbonate sheets. Dry rubbing of the surface
will damage the protective layer of the cladding and shorten its shelf life. Never rub the surface of polycarbonate sheets
with brushes, metallic cloth or other abrasive materials. When disinfecting the greenhouse from pathogens causing fungal and bacterial diseases, do not use «sulfurblocks» to avoid
frame corrosion (blackening).
Warranty liabilities
Term for making claims is 24 months from the day of purchase Warranty does not apply to cases of: 1. Greenhouse installation in violation of instruction requirements2. Violation of the rules of operation.
3. Inappropriate use of the greenhouse.
4. Deformation of the greenhouse as a result of ground movement.
5. Floods, hurricanes and other natural disasters.
3
TECHNICAL CERTIFICATE
LIST OF BOXES FOR ASSEMBLY
Greenhouse STRONGBase Box Ext. Box
1/3 2/3 3/3 1/2 2/2
3х4 m
MODEL
1 1 1 - -
EXTENSION FOR
GREENHOUSE 2m
- - - 1 1
3х6 m
MODEL
1 1 1 1 1
3х8 m
MODEL
1 1 1 2 2
4
№ marking description quantity,
pcs
1 4н L=1,62 m 6
2 4в L=1,62 m 3
3 4вк L=1,62 m 2
4 4нк L=1,62 m 2
5 4нк-1 L=1,62 m 2
6 1 L=0,92 m 10
7 2в L=0,96 m 12
8 9-1 L=0,98 m 4
№ marking description quantity
pcs
9 9-2 L=1,4 m 2
10 9-3 L=1,4 m 2
11 17 L=1,4 m 3
12 18 L=1,1 m 6
13 19 L=0,99 m 6
14 20 L=0,34 m 6
15 21 L=0,35 m 6
16 - end ampflifier 4
№ marking description quantity,pcs
17 2 L=0,96 m 24
18 3 L=0,14 m 14
19 5 L=0,09 m 4
20 8 L=1,04 m 4
21 10 L=0,82 m 4
22 11 L=1,02 m 2
23 11-1 L=1,02 m 2
24 12 L=0,76 m 8
25 12-1 L=0,32 m 4
26 13 L=0,71 m 6
27 13-1 L=0,71 m 4
28 14 L=0,96 m 4
29 15 L=1,0 m 4
30 16 L=0,74 m 2
№ marking description quantity,pcs
31 - top bandage 5
32 - bottom bandage
10
33 PK profile L=1,05m 4
34 P profile L=1,0m 4
35 - seal loop L=3,7m
1
36 - seal door L=10m
1
37 - seal side wall L=12m
1
38 - hook for doors and window
4
39 - loops for doors and windows
8
40 - tube bend spinner
1
41 - Handle 8
42 - pin 4
43 - bracket 8
TECHNICAL CERTIFICATE
DETAILED PARTS LIST BASE
BOX 1/3
BOX 2/3
5
44 bracket for the hook
8
45 screw М4 х 8 534
46 screw М4 х 10 50
47 screw М4 х 25 132
48 screw М4 х 35
32
49 self-tapping screw 6
50 nut М4 748
51 washer 160
52 tape 1
53 workpiece for locking (turner with 2 elastic nozzles)
4
54 bolt М6 х 60 10
55 nut М6 10
56 washer 6 20
57 double-sidedtape L=5m 2
TECHNICAL CERTIFICATE
BOX 2/3
BOX 3/3
20
40
1095
right end side
2 pcs.
14
80
20
40
1095
left end side
2 pcs.
2000
10
50
base roof and side walls
6 pcs.
33
0ridge panel-2 pcs.
81023
5
2000
10
00
base roof and side walls
6 pcs.
6
№ marking description quantity,
pcs
58 1 L=0,92 m 4
59 2 L=0,96 m 12
60 2в L=0,96 m 6
61 3 L=0,14 m 4
62 4н L=1,62 m 4
63 4в L=1,62 m 2
64 17 L=1,4 m 2
65 18 L=1,1 m 4
66 19 L=0,99 m 4
67 20 L=0,34 m 4
68 21 L=0,35 m 4
№ description quantity,
pcs
69 profile L=1,0m 4
70 top bandage 2
71 bottom bandage 4
72 screw М4 х 10 184
73 screw М4 х 25 24
74 nut М4 208
75 washer 16
76 bolt М6 х 60 4
77 nut М6 4
78 washer 6 8
79 double-sided tape L=5 m 1
TECHNICAL CERTIFICATE
DETAILED PARTS LIST EXTENSION
BOX 1/2
BOX 2/2
2000
10
00
base roof and side walls
6 pcs.
7
21
MOUNTING ON THE FOUNDATION
! L1=L2
L1
2988
1061 866
А А
Б
А А
Б
21
А
60
40
60
10
00
1
00
0
10
00
1
00
0
60
1General view of the
frame, greenhouse STRONG
Greenhouse STRONG extended by anynumber of insets
General view of theinset for greenhouse STRONG. Each inset extends the greenhouselength by 2 m
2
№2 from«BOX
№1»
3
pc.
4В
№3 from«BOX
№1»
2
pc.4ВК
№7 from«BOX
№1»
4
pc.
2В
from«BOX №2»
4 pc.
М4х8 М4 from«BOX №2»
2 pc.
М4х8 М4
8
3 4
5
№7 from«BOX
№1»
8
pc.2В
from«BOX №2»
4 pc.
М4х8 М4 from«BOX №2»
2 pc.
М4х8 М4
from«BOX №2»
4 pc.
М4х8 М4
from«BOX №2»
2 pc.
М4х8 М4
from«BOX №2»
4 pc.
М4х8 М4
№4 from«BOX
№1»
1
pc.4НК
№5 from«BOX
№1»
1
pc.4НК
-1
№1 from«BOX
№1»
3
pc.
4Н
№7 from«BOX
№2»
8
pc.
2
9
6
7
8
№ 1
№4
Н
9
№7 from«BOX
№2»
8
pc.2
3
1
х1
0
from«BOX №2»
3 pc.
М4х8 М4
1
pc.
3
№6 from«BOX
№1»
1
pc.
1
№32 from«BOX
№1»
1 pc.
№18 from«BOX
№2»
from«BOX №2»
4 pc.
М4х8 М4
№7 from«BOX
№2»
8
pc.
2
10
10
№9
-3
№11-
1
№
8№1
0
№1
0
№
8
№1
1
№1
1
№9
-2
№9
-2
№9
-3
№9
-1
№9
-1
№9
-1
№
1
№2№9-
1
from«BOX №2»
2 pc.
М4х8 М4
from«BOX №2»
2 pc.
М4х8 М4
from«BOX №2»
4 pc.
М4х8 М4
from«BOX №2»
4 pc.
М4х8 М4
from«BOX №2»
2 pc.
М4х8 М4
№22 from«BOX
№2»
1
pc.
11-1
№9 from«BOX
№1»
1
pc.
9-3
№8 from«BOX
№1»
1
pc.
9-1
№20 from«BOX
№2»
1 pc.
8
№18 from«BOX
№2»
1
pc.
3
№21 from«BOX
№2»
1 pc.
10
from«BOX №2»
2 pc.
М4х8 М4from«BOX №2»
2 pc.
М4х8 М4
from«BOX №2»
2 pc.
М4х8 М4
№10 from«BOX
№1»
1
pc.
9-2
№21 from«BOX
№2»
1
pc.
10
№23 from«BOX
№2»
1
pc.
11
№20 from«BOX
№2»
1
pc.
8
11
11
1
1
7
1
7
2
0
1
1
20
from«BOX №2»
4 pc.
М4х8 М4from«BOX №2»
2 pc.
М4х8 М4
№14 from«BOX
№1»
1
pc.
20
№13 from«BOX
№1»
1
pc.
19
№12 from«BOX
№1»
1
pc.
18
№15 from«BOX
№1»
1
pc.
21
№11 from«BOX
№1»
1
pc.
17
from«BOX №2»
6 pc.
М4х8 М4
from«BOX №2»
6 pc.
М4х8 М4
№15 from«BOX
№1»
1 pc.
21
№12 from«BOX
№1»
1
pc.
18
from«BOX №2»
4 pc.
М4х8 М4
№14 from«BOX
№1»
1
pc.
20
from«BOX №2»
2 pc.
М4х8 М4
from«BOX №2»
2 pc.
М4х8 М4
№13 from«BOX
№1»
1
pc.
19
from«BOX №2»
2 pc.
М4х8 М4
12
13
12
9-2
9-3
№16 from«BOX
№1»
1
pc.
№43 from«BOX№2»
2 pc.
from«BOX №2»
1 pc.
М4х8 М4
from«BOX №2»
1 pc.
М4х8 М4
from«BOX №2»
1 pc.
М4х8 М4
from«BOX №2»
1 pc.
М4х8 М4
№16 from«BOX
№1»
1
pc.
from«BOX №2»
1 pc.
М4х8 М4
from«BOX №2»
1 pc.
М4х8 М4
from«BOX №2»
1 pc.
М4х8 М4
from«BOX №2»
1 pc.
М4х8 М4
№16 from«BOX
№1»
1 pc.
№43 from«BOX№2»
2 pc.
1
5
1
5
1
4
1
4
12
1
3
12
12
12
1
3
12
12
1
3
1
3
1
3
1
2
1
2
1
2
1
2
14from«BOX №2»
2 pc.
М4х8 М4
from«BOX №2»
4 pc.
М4х8 М4
from«BOX №2»
7 pc.
М4х8 М4
from«BOX №2»
6 pc.
М4х8 М4
from«BOX №2»
4 pc.
М4х8 М4
from«BOX №2»
2 pc.
М4х8 М4
№26 from«BOX
№2»
3
pc.
13
№24 from«BOX
№2»
4
pc.
12
№28 from«BOX
№2»
2
pc.
14
№29 from«BOX
№2»
2
pc.
15
13
13-
1
12-
1
12
-1
12-11
613-
1
12
-1
15!
L1=L2
16from«BOX №2»
4 pc.
М4х8 М4
from«BOX №2»
2 pc.
М4х8 М4
№30 from«BOX
№2»
1
pc.
16
№25 from«BOX
№2»
2
pc.
12-1
№27 from«BOX
№2»
2 pc.
13-1
5
20..25
mm
№36 from«BOX №2»
0.8
m
№41 from«BOX№2»
2 pc.
№42fro
m«BOX №2»
1
pc.
№44 from«BOX №2»
1
pc.
№39 from«BOX №2»
1
pc.
from«BOX
№2»17
pc.М4х2
5М4from«BOX №2»
2
pc.
М4х10 М4
from«BOX
№2»1
pc.М4х2
5М4
№35 from «BOX
№2»
1.5 m
№36 from«BOX №2»
1.85
m
from«BOX №2»
4
pc.
М4х10 М4
fro
m
№36«BOX№2» 0.8
m
№19 from«BOX
№2»
1 pc.
5
№51 from«BOX №2»
1 pc.
14
17 18-1
5
20..25
mm
№39 from«BOX №2»
1
pc.
№35 from «BOX№2»
0.35
m
from«BOX №2»
2
pc.
М4х10 М4
from«BOX
№2»7
pc.М4х2
5М4
fro
m
№36«BOX№2» 0.8
m from«BOX №2»
4
pc.
М4х10 М4
№19 from«BOX
№2»
1 pc.
5
№35 from «BOX№2»
0.35
m
fro
m
№36«BOX№2» 0.8
m
№44 from«BOX №2»
1
pc.
from«BOX
№2»1
pc.М4х2
5М4
№41from«BOX№2»
2 pc.
fro
m
№42«BOX№2» 1
pc.
№51 from«BOX №2»
1
pc.
from «BOX
№2»1
pc.
from «BOX
№2»1pc
.М4х1
0
М4
№44 from«BOX №2»
1 pc.
№38fro
m«BOX №2»
1 pc.
№51 from«BOX №2»
1
pc.
№44 from«BOX №2»
1
pc.
from«BOX
№2» 1 pc.
М4х25 М4
from«BOX
№2»15
pc.М4х2
5М4
№38fro
m«BOX №2»
1 pc.
15
18-2
5,15
м
19
9
5
fro
m
№40«BOX№2»
1
pc.
fro
m
№53«BOX№2»
1
pc.
fro
m
№53«BOX№2»
2
pc.
1.
2.
5
from«BOX
№2»2
pc.М4х10
М4
from«BOX
№2»8 pc.
М4х3
5М4
from«BOX
№2»8
pc.М4х3
5М4
16
20 №37
fro
m
«BOX
№2»6 m
fro
m
№37«BOX№2»
6 m
21
PK
PK
№57 from «BOX №2»
2 pc.х1.05
m
№33 from «BOX
№2»
2
pc.
PK
PK
Cellular polycarbonate shall be installed strictly defined side out(towards the sun), which has a protective layer. The protective layer isusually at the side with the inscriptions on the transport film. The film onthe other side of sheet is transparent. After marking the sheet, but prior toits cutting, make a mark on the protected side of the sheet for each piece:after removal of the transport film sheet sides are not visually different. Thetransport film is stripped from both sides immediately before fixing thecladding on the frame.
Sections of polycarbonate withopen honeycombs should becoveredby adhesive tape.
The arrow on thedetails is directed to
the front sidegreenhouse
17
22
PKPK
23
PK
!do not fully
tighten!
from«BOX №2»
4 pc.
М4х2
5М4
24
25
PK
№31 from «BOX
№2»
1
pc.
from «BOX
№2»2
pc.М6х6
0
6 6 М6
!tighten!
from«BOX №2»
8 pc.
М4х2
5М4
18
26
PK
PKP
P
P
№33 from «BOX
№2»2
pc.
PK
№34 from «BOX
№2»
4 pc.
P
№57 from «BOX №2»
2 pc.х1.05m4 pc.х1.0m
from «BOX
№2»2
pc.М6х6
0
6
6
М6
19