8/17/2019 Manual Hioki 3030-10 HITESTER

1/4

HIOKI

3030-10HiTESTER

lnstruction Manual

 April 2015 Revised edtion 14Pnted in Japan

3030E981-14 15-04H 111�11* 6 O 1 4 9 6 6 E

HIOKIHIOK E. E CRPRATN

HEADQUARTERS

81 Koizmi Ueda, Nagano 386-1192 JaanTEL +81268280562 FAX 81268280568ocom@iokico.j w.hiokcom(neaional Sae Deamen)

Ps is t our bst t oicom r t folow:• Rio ott iformio

• h lts! rvisos o struco mus mus i otr s cros o Cormiy r isrms t cmply i C mrrquirmts

WarrantyWaranty malfunctions occurrng under condiions of nomase n conformiy wh he lnsrcion Manual and ProdcPrecautonay Markings wil be repared fee of charge. Thswaranty s vad fo a perod of hree (3) years from the dae ofpuchase Pease conac the distibor fom which youpchased the poduct for fthe infomaon on warantyovsons

l lntoductionThank yo for purchasing he HIOK 30300 HTESTER Toobain maxmum perfomance fom the insumen, please readhs mana frst and keep t handy fo fue eference

6004966

Safety

& DANGERThs nstrmen is desgned o compy wh EC 6100Safety Sandads, and has been thooghy esed fo safeypror to shipment Howeve, mishanding durng use codres in njuy o deah, as wel as damage o henstumen Be ceain tha you ndersand he insconsand precaons n the manual befoe use We disclam any

responsbilty fo accidents o nres not esing drecly from nstumen defecs

• Measurement categoriesThs nsrmen compes wh CAT safey reqiemensTo ensue safe operaon of measremen nstrumens EC6010 estabishes safety sandads for varios electrcalenvonmens, categozed as CAT o CA V, and caledmeasemen categoies

CAT : Prma elecrca cicits in equipmen connected toan AC eectrca olet by a power cord (poable oos,household appliances, etcCAT covers decy measng elecrcal olerecepacles

CAT Prima eecrca circis of heavy eqpmen (fixedinsalaions) connected diecy o the disrbonpane, and feeders fom the dsrbon panel tooutles

CAT V The crct from the seice dop to the seiceenrance, and o he power meer and pimaryovercurrent protection device (disbton panel)

Using a measemen nsrment in an envonment designaedwih a higher-nmbered category han tha fr which thenstrumen s aed coud resul n a severe accden, and musbe carefuly avoded

Use of a measement instment tha is not CATated in CA T to CAT V measremen applications cod esut n a severeaccident and mst be carefly avoded

ixe nallaion

i manal conain inrmain an arnin eeial r aeoeraion o e inrmen an r mainanin i in ae eraingconiion Bere in , be re o carely ea e lloin saeyrecaion

• Safety symbols

e & ymbo rine n e inrmen inicae a eer o reer o a correonng i in e maal

Lmarke i e ymbo bere in e releanncionI e manal e& ymbl inicae ariclrly imoranirmaion a e er o rea bere in einrmen

. nicae a roning ermina-

@ nicae a oblenlae eice--- icae D Diec rre

' licae A Aleaing rren

e lloing ymbol in maa inicae e relaie imorance o

ca on a arnQ

& DANGERnicae a incorrec oeraio reen anexreme aar a co rel in erio inry orea o e er

&WARNINGnicae a incorrec oeraon ree aiican aar a co re in erio iury orea o e er

& CAUTIONlnicate a correct oeaion ee aoibiiy o iy o e er or amage o e

irmen

NOTE nicae aiory iem relae o erormace rcorec oeraion o e irme

lnspectonWen yo receie e inmen inec i carely o enre a oamage occrre rin iing l amae i eie or i i ai ooerae accorin o e eciicaion coac yor ealer or Hioirereenaie

Precautons

& DANGER

• Obseve he foowing precaions to avoid eectic shock Always vefy he appropiate setng of the range selecoswitch befoe connectng he test leads Disconnec he

 test eads fom he measuremen obec befoe swichng the range seleco swich

• Before takng a measement, check he posiion of herange swich. Do not measure voage osde he setvotage range or voltage at levels n excess of themeasurement imit Doing so may damage he nstrumenor cause an accident resling n inry o death

• Do not input voltage to the cen measrementressance measuement, and batey test ranges Doingso may damage he insrumen or case an accidentresuting in inuy o deah

NOTE: The bui-in fuse pevents a sho-cicut in a poweline resling om a malfunction o msse of hensmen However, this b-in fuse protecton sefecive r p o 250 VAC commerca powerinpu

• f he end of a tt ead shorcuits ines h a votageen them, hs is vey dangerous and n lead o a seosaccden Exeise gea e when measuing votage

8/17/2019 Manual Hioki 3030-10 HITESTER

2/4

, WARNING

To preven! elecric shock, do not aow e insrume tobecome wet and do ot use te isrume whe yourhads are wet

, CAUTION

• lf e proecive fuctions of the instrumet are damaged,ether remove he instrumen from seice or post wamgsto preve ohers from usg te strument adveey.

• Noe tha te istrumet may be damaged f voage or curre excess of the measurement rage s iput

• Do not store or use e isrumet were i wi be exposed o drect sulgt, ig temperaures, gh umdity, orcodesaton lf exposed to suc codons, e sumemay be damaged, the isuation may deeriorate, and hestrumet may o oger satsfy ts specfications

• Aer use, aways urn OFF e power

NOTE

• lf the meter pointer is not positioned n the O scae vaue, use the zeroadjuster to adjust it corecty.

• the use is bown o the test eads are damaged any ange doesnot operate To check the test eads wiring and use bowing eer to"3. Fuse and Test Leads Coniuty Check in Battery and FuseRepacement

• the meter cover becomes eectrostaticay charged vaues may 

dispay incorrecty because o attractve orces on the neede In thiscase, appy anti-static treatment to inhibit eectrostatic charge buiduphe eicacy o such eectrostatic treatments dissipates ove time sothe treatment may need to be reappied periodcay

Measurement PocedurePre-Operation lnspecton

o avod the possibity of eectric shock o incorrect measurementheck the oowng tems befre using the instrument

. WARNING

Use only te supped Mode L9207-30 TEST LEAD• Beore usng te instrumnt, make sure hat te insuaton

o e tes eads is udamaged and ha he whte or redpotio (insulaio layer) nsde e cabe s ot exposedsing te istumet in suc conditos could cause aneectric shock, so contact your deaer or Hiokirepresenaive for repacemensMode L00 TEST LEAD

• For voltage measurement short the test eads and check that O V isindicated

• For resistance measurement short the test eads and adjust thereading to zero using the zero ohm adjuster (O Q ADJ knob).

• Measure a test item with a known vaue (battery AC suppy resistoretc) to check that the instrument is functioning correcty

Voltage Measurement (AC, DCV)

, DANGER

The maximum pu voage s 600 V DC/AC Atemping tomeasure voage in excess of e maxmum nput coulddesroy he strumet and result i persona inju or death.

. CAUTION

Removable seeves are atached to te mea pns a teeds of te tes eadsTo preve a sho crcu acciden, be sure o use the testleads wt e seeves atached wen perormingmeasuremens te CAT 111 measureme categoyRemove te seeves om e test eads whe peormng

measuremens i e CAT II measurement caegoryor detais o measuremen caegores, see "Measurementcategores in the insruction manualWe peormg measuremets wi the sleeves attached,be careful o avoid damaging the seeves lf e sleeves areinadveenty removed durig measuremen, be especialycareful hading e test eads to avoid eectric shock

1 Set the ange switch to the ACV or DCV ange proper for the votageto be measured.

NOTE: f the votage vaue is uncear, initiay set the range switch t the600 V range, and ae obtainng a readng n this ange changeto the range proper r the votage vaue

2 Connect the back test ead to the - termina and the red one to the +termina

3 Connect the test eads to he circuit to be measued in parae, thenread the resuts on the AC/DC scae When the DCV is seected iconnecting the red test ead to the postive sde and the back one tothe negatve side then the pointe deects normay

NOTE When changing the ange disconnect the test eads rom theobject to be measured

Measurement exampe he votage measurement o the outet unction � V Range 120 V Scae DC/AC 12 Measurement vaue 100 V

Current Measurement (DCmA, 60 µADC)

. DANGER

Do o apply a voage whe a curren rage s selected. Appying a voltage may resu in daage to e istrumeor a serous accden

L WARNING• To avoid elecrica shock do no use he istrume to

measure curre i crcus of 250 V or greaer Tecure fucto overload protecion trips a 50 Vrs

• To preven elecrical accides, tu the power o beforecoecting he est leads and he take easurements

Set the range switch to the DCmA or 60 µA range

NOTE the curren! vaue is uncear intiay set the range switch to the300 mA DC range and afer obtaining a reading in this rangechange to the ange poper r the curren! vaue

2 Connect the back test ead to the - termina and the red one to the termina

3 Connect the instrument to the eectrica ne to be measured in series

(to the cut of ine) Connect it so that curren! ows rom the red testead to the back one ( connecting it reversey the pointer deectsin the everse drection)

NOTE When changing the range, disconnect the test eads rom theobject to be measured

4. Read the resut on the AC/DC scae

Measurement exampe he curren! measurement

that t ows for the oad 10 . uncton:= A Range: 300 mA Scae: DC/AC 30 Measurement

vaue 150 mA

-

-

[1

o

_I

=====__JI

1 5 V

8/17/2019 Manual Hioki 3030-10 HITESTER

3/4

Resistance Measurement (' )

L DANGERDo not input volage o he resisance measurementfnctions. Doing so may damage the insrumen or casean accident resuling in njury or deah

WARNINGTurn o he power and discharge the capactors beoremeasring resistance in a circí!

1. Set the range switch to the proper range

 Accurate measurement can be made by selecting a range where thereading wi be about the center of the range

2 Connect the back test ead to the - termina, and the red one to the termina

3 Sho the test eads and use the zero ohm adjuster (O QAJ knob) toadust the pointer to the O scae

NOTE: f the pointer cannot be adusted to the O scae, repace thebattey

4 Connect the test eads to the circuit to be measured, and read thevaue from the scae

NOTE When changing the range disconnect the test eads from theobject to be measuredFor resistance measurement, the indcation may be unstabe ifthe ends of the test eads are dity, and the contact s poor fthe indication is unstabe, increase the contact pressure, or

cean the ends of the test eads by wiping with acoho or smiarsovent5 In order to obtain the true vaue, it is necessay to mutipy the reading

shown by the factor for the range in use

Measurement exampe• 51kQ resistance measurement• Function x10• Scae Measuement vaue 51 k

LED Check (ighting Test)

1 Set the range switch to the x 1O (LE) range

Resistance

2 Connect the test eads to both sides of the E to be tested3 The LE has poarity so uness it ight in 2, try reversng the test

eads connections4 When it ights the pointer defect however a reading has no meaningNOTE  The intea! battery of tíe meter has positive poarity in the -

termina Therefore, it is right to connect the red ( ) test ead tothe cathode side of the E and the back (-) one to the anodeside

Temperature Measurement

(Use the optonal 9021-01 THERMISOR TEMPERAURE

PROBE.)

1 Set the range switch to the function R x 1 O (EMP) range2 Connect the two back pugs of the three pugs of the temperature

probe to the and - terminas3 Use the ero ohm adjuster (O AJ knob) to adjust the pointer to the

O scae4 After O adjustment change the pug in the + termna to the red

pug5 Connect the temperature probe tip to the measurement pace, and

read the vaue from the temperature scae

CAUTIONBe careu to avoid oching he removed plg wh anyother obects.

REFERENCE  The time for indication and measured temperatue varydependng on the condition o heat conduction to theprobe

Battery test (BA 1.5 V)

DANGERDo no apply a over-voltage whie a BA 15 V range sseleced Applying a overvoltage may resut n damage othe instrument, or a serious acciden

1 Set the range swtch to the BAT 5 V range2 Connect the back test ead to the - termina and the red one to he

temina3 Connect the test eads to both sdes of the battey to be measured

(the red test ead to the positive side and the back one to thenegative side) and read the measurement vaue

Removed a battery from a set as much as possibe and measure itaoneREERENCE  Ths measures the votage with a 150 mA (oad resister

10 Q) curen in order to measure the battery when t isbeing usedWhen this is compared with measurement n the 3 VDC range (nooad votage vae) the ower votagevaue is indicated fo the more consumed battey

Measurement exampe• 15V battery deterioration examination• Function BAT• Scae BATT• Measurement vaue 15 V

Batter and Fuse Replacemet

WARNING

'1

lo

 o avoid eecric shock when replacing he bateres andfuse, frs disconnect he test leads from the obect to bemeasured Also ater repacing the bateres fuse awaysreplace he case before sing he nsrment

nI ·u

1

i Removng he case back  Ataching the case bac

1 Remove the fixingscrew

2 Remove the caseback from the upperpar

I3 Repace the

batteries and fuse nsert the batteries with the poaritycorre as per thebattery indication

FUSE

Spare fuse

3 Fasten the fixing screw

2 Attach theupper pa*Refer to the

oowingCAUTIN

 A good one shoud aways

End face of mounting cp

CAUTINPrior to attaching the upper pa, check if themeta fittings fi into the end face of themounting cip (dashed ine in the figure)f they protrude the projection on the upperpar wi damage the meta fittings

~ I ;

etal

fittings

8/17/2019 Manual Hioki 3030-10 HITESTER

4/4

Baer Replacement

�WARNING• Do not mix old and ew bateres, or diret typs f

bates. Aso, be caeul o ose battey poaiyig itallation Ohse o peforance or ama om baty lakage coud s.

• Baery ay expode i mitad D n shor-cicitrechge dsasemle o dspe o in ire

• Hd ad dipose f aes i acodance h oalgulaons

• To avoi csn bay akage eove hebaee frm h suen f s to be stoed or a log

 ie

Remove the case back.Replace the batteries with new onesAttach the case back

Fse Replacement

� WARNING• Oy use fes o secfed ype a s aed fo e

specfd cue and voage Usig a u dos neet te specfctios, scaly of arge rencaacty (clg a shor circut of he coer wre) ay

ot cas h s-o funco operate, a es iburng a shor ccui ijuy o at.• Fus spciicain: 05 A/250 V w noacg

potectn 20 m m dia.

Remove the case backReplace the fuse with a new one

OTE: A spare fuse is provided nside the instrment as showBe sue to suppy a new spare fuse if the spare fuse is used torepace a bown fuse

Attach the case back

use and Test Leads Continity Check

Connect the black test lead to the - terminal, and the red one to the +terminalSet the rage swtch to the x 1 k range, and short the test leadsf the pointe deflects, the fuse ad test leads coduct (ae not blowand damaged)f the pointer does not deflect the test eads may be damagedCheck aain after elac the fuse

Specicatons (*mark: shared range)CV �03/3/12/30/120/300/600 V 20 kQN (03

:167 kQN) ±25% o fs readingCV 12/30/120/300/600 V 9 kN 25% of fs

eading (12 V 4%)CA •0 µA 30/300 mA interna! voltage drop

ominal value) 300 mV 3% of fs reading

P to 3 k central scale 30 R x 1/R x 10/R x100/R x 1 k 3% of scae engthATT 9 to 18 V oad resstance 10, 6% of s

eadingemperature scale 20 to 150' (standard) 20 to 300F (for USA

nly) 3% of scale length (with the optional11 THERMISTOR TEMERATURE ROBE)

otective system hort circuit protecton of power lne by useup to 250 VAC commecial powe input) This system s not prottng the nstrmen

om damage b sug saf.verload protection o meter device by dode

Meter nternaly magnetized tau band

use ¡05 AH/250 V 20 mm x 5 mm da (norcng type),nternal esistace Approx 0866

rop proof ne meter to concretetadards applying afety E 6101

 Measurement Category (anticipated trasient overvoltage 6000 V) oluton Degee 2

MC E 616

 ower supply ated powe votage 15 VDC x 26 maganese battey x 2

 Maximum rated power P36 VALocaton r Use ltitude up to 2000 m Altitude up to 6562 eet

ndoorsDimensons ad mass ppox95W x 141H x 39 mm Approx280 g

prox374 x 555"H x 154" Appox99 o Opeatng tempeatue to 40 32 to 104F 80% RH maxand humdtyStorage temperature 10 to 50 14 to 122F, 80% RH max

and hmidity.

 eriod of guaranteed 1 yearaccuracy Maximum iput votage 00 VAC/DCAccessories 920730 TEST LEAD

pare fuse (05 AH/250 V 20 mm x 5 mma, nonarcig type)6 (=15 V) manganese battey (2)nstructio Maual

390 CARRYG CASE Optonal accessoy 0211 THERMSTOR TEMERURE ROBE

Handling of carrying caseWhen the instrument is used o stored wth the cover of the carryingcase ncompetey closed the cover can be deformed depending onambent temperature This may cause that the cove cannot be closedClose the cover completey to preven it fom beig defomed To closethe cover completely, press the cover verticaly, engaging the edge of thecover with that o th lower case

! MaintenanceGently wipe di from the suace of the instument wth a sot clothmoisteed wth a smal amout of water or mid detergeDo not try to clean the nstrumet usng ceaners containing organicsovents such as benine alcohol, acetoe ether ketones, thiners orgasolin Thy may case dscooratn or damage

! Servicef the instrument is not functiong propely check the batters the testleads wing and fuse blowing f a pobem is found contact yor deaeror HOK representative ack the istrument carefuly so that it wil notbe damaged during transport and write a detailed descrpton of thepobem HOK cannot bear any reponsibility for damage that occursdung shipment

Part Names

1.

2

3.

8

4.

L9

5. 10

 Meter omenclature1 anel 2 ointer 3 Case back 4 ace plate5 Rage selector switch 6 Scae plate 7 Zero adjuste8 Zero ohm adjuster 9 ositive () termial10 egative () temnal