Manufacturer of Specialty Integration Cameras and Camera Control Systems

September 2005

Product Overview

EZCamera™ Cable SystemPower, Video & RS-232 Control Over CAT 5Complete Installation Kit

WallVIEW™ 100 PTZ Camera System(10X Optical Zoom)

WallVIEW™ 70 PTZCamera System(18X Optical Zoom)

WallVIEW™ PTZ Camera Series

WallVIEW™ PTZ Camera Series

WallVIEW™ 300 PTZCamera System(12X Optical Zoom)

WallVIEW™ 50i PTZCamera System(26X Optical Zoom)

WallVIEW™ 50i PTZ HideAway

CeilingVIEW™ PTZ Camera Series CeilingVIEW™ 70 PTZ

Camera System

CeilingVIEW™ 50iR PTZCamera System

CeilingVIEW™ 70 PTZ HideAway

Ceiling-Mounted Visualizers

CeilingVIEW™ Visualizer (1 CCD)

CeilingVIEW™ MegaPro Mega-Pixel Visualizer (3 CCD)

In-Wall Camera Covers

CoverVIEW™ for Canon VC-C50i

CoverVIEW™ for Sony EVI-D100

Video, Power & Control Wiring Center

Quick-Connect 4 for Vaddio EZCamera™ Cabling Systems

1 Power Supply for 4 CamerasSelectable 15v or 18v Power SupplyCentralized RS-232 ControlProfessional Installation

TrackVIEW

The Vaddio TrackVIEW Camera Control System is a presenter control system that incorporates camera tracking and video preset camera control into one system .

TrackVIEW

How does it Track me? Tracking is performed by the use of a reference

camera that provides a baseline image to our Video Motion Processor

This constant image bitmap monitors any changes to any of pixels in the bitmap

When a pixel bitmap change occurs those changes are sent to our camera control processor which then sends out the appropriate move command to the camera

Why would you use tracking and pre-set camera control together?

The basic system design incorporates camera tracking into Vaddio’s pre-set camera control technology. This allows the presenter to stay on camera as they walk between pre-set video camera shots

The net effect is that the presenter gets nice tight pre-determined camera shots at the main presentation areas and yet stays on camera when they move to another area

What Cameras can you use?

Each TrackVIEW system comes with a Sony EVI-D70 equipped with a wide angle lens to use as the reference camera

For the Tracking camera you can use either the Sony EVI-D70 /EVI-D100 / BRC-300 and the Canon VC-C50i / VC-C50iR

Pre-set camera triggers

StepVIEW, AutoVIEW IR, and any other type of contact closure device can be connected to TrackVIEW. Power for the AutoVIEW IR is now incorporated into the system and replaces the need for a Vaddio control expander.

ControlVIEW Xtreme/ProductionVIEW camera control systems can be added to the system. These add classroom control triggering to devices such as Microphones and TouchVIEW buttons so that you can automate student cameras into your system design

Pre-set camera triggers

StepVIEW, AutoVIEW IR, and any other type of contact closure device can be connected to TrackVIEW. Power for the AutoVIEW IR is now incorporated into the system and replaces the need for a Vaddio control expander.

ControlVIEW Xtreme/ProductionVIEW camera control systems can be added to the system. These add classroom control triggering to devices such as Microphones and TouchVIEW buttons so that you can automate student cameras into your system design

TrackVIEW Features Motion Tracking or Preset Tracking or Both

The system uses motion-tracking technology with Vaddio’s preset camera control technology. This combination of technologies when on, allows the presenter to stay on camera as they walk between preset camera shots.

Motion tracking can be disabled providing for only triggered preset tracking and preset tracking can be disabled allowing for only motion tracking.

TrackVIEW Features First Step, Last Step and Multi-Step Modes

First Step - The first IR sensor or mat to be triggered will hold the camera preset

Last Step - The last IR sensor or mat triggered will hold the camera preset

•Multi-Step - 2 mats or IR zones, or combination, triggered concurrently triggers a user defined 3rd preset. Up to 10 presets are available for combined pre-set configurations

TrackVIEW Features Built-in EZCamera Cabling System

The system has built-in EZCable System for running power and video over a single Cat. 5 cable. You no longer need Quick Connect Boxes to connect the cameras to the system.

These support all Sony and Canon cameras except when using the BRC-300 as the Tracking camera, then the external Quick-Connect box and camera shoe is required.

TrackVIEW Features Tracking Camera Preset

The tracking camera pre-set is a user definable pre-set camera view that is activated when the system goes into a tracking mode. This pre-set sets the zoom and the tilt of the tracking camera,so that when the tracking is enabled the camera’s zoom and tilt will be at a pre-assigned position.

TrackVIEW Features Additional Features

RS 232 Control for AMX/Crestron RS 232 control port for ControlVIEW Xtreme IR Remote Control USB System Setup port Dual Camera Mounting system

2-Model 70 Cameras with EZCamera Cabling Shoes and Dual 70/70 Mount

TrackVIEW

2-StepVIEW Locator Mats

S-Video Output

Main VideoDestination (Monitor, Codec, Modulator etc…)

2-Cat 5 Cables(Video/Power and Control)

TrackVIEW Triggers

1-AutoVIEW Active IR Sensor

2-Cat 5 Cables(Video/Power and Control)

TrackVIEW 70 System

TrackVIEW 70 System

Integrated with ControlVIEW Xtreme, WallVIEW, Quick-Connect 4 and MicVIEW

TrackVIEW Triggers

2-StepVIEW Locator Mats

1-AutoVIEW Active IR Sensor

TrackVIEW

2-Cat 5 Cables(Video/Power and Control)

2-Model 70 Cameras with EZCamera Cabling Shoes and Dual 70/70 Mount

Main VideoDestination (Monitor, Codec, Modulator, Audio system etc…)

Cat. 5 CablesRS-232 ControlDaisy Chain

2-WallVIEW 100 PTZ & 1-WallVIEW 70 PTZ

Quick-Connect 4

ControlVIEW Xtreme

S-Video

Audio

Triggers Up to 12 Total

Push to Talk AT MicsUp to 12 Total

Mic Cables

S-Video

2-Wire Triggers

S-Video

2-Cat 5 Cables(Video/Power and Control)

Cat 5 Cables(Video/Power)

MicVIEW

RS-232

Presenter-Controlled Camera SystemsAutomatic Presenter Tracking

ControlVIEW™ Xtreme PTZ Camera Control System

4 Cameras, 72 Pre-Set Positions

For Use with Microphones and/or Presenter Location Systems

Presenter Location Systems

StepVIEW™Presenter’s CameraLocation System

Exposed Mats → Above-the-Carpet

Concealed MatsUnder-the-Carpet(Not Shown)

Presenter Location Systems

AutoVIEW™ IRPresenter’s Camera Control System

Ceiling-Mounted Active IR Sensor

Presence-Sensing

Adjustable Zone

“Invisible” Mat

Presenter Location Systems

TouchVIEW™WirelessRemote Control System

4 Buttons per Receiver

Expand with AdditionalButtons & Receivers

Camera-Controlled Microphone Systems

MicVIEW™Teleconference Microphone Switcher

12 Mics per Box, Expandable to 8 Boxes with 96 MicsPush-to-Talk, Voice-Activated & Instructor-Priority Modes

Operator-Controlled Camera SystemsManual Camera Control

ProductionVIEW™Joystick – Preview Monitor – 6x2 Video Switcher

6 Cameras, 12 Pre-Sets Per CameraIncludes Automated Control Functionality

StreamVIEW AV Server

StreamVIEW AV Server

Operator-Controlled Camera Systems

Vaddio/Sony® Joystick Control Bundle

VISCA PTZ Camera

Controller with Custom

VISCA Control Cable

and Video Switcher Cable

Integrator-Friendly Solutionsfor a Variety of Audio Visual & Video Conferencing Applications

ControlVIEW Xtreme

VISCA Compatible

Camera

TouchVIEW MicVIEW or

3rd Party Mixer

StepVIEW AutoVIEW IR

RoomControllerConnect To Codec

TrackVIEW Triggers

2-StepVIEW Locator Mats

1-AutoVIEW Active IR Sensor

TrackVIEW

2-Cat 5 Cables(Video/Power and Control)

2-Model 70 Cameras with EZCamera Cabling Shoes and Dual 70/70 Mount

Main VideoDestination (Monitor, Codec, Modulator, Audio system etc…)

RS-232 ControlDiscrete Control Channels

2-WallVIEW 100 PTZ & 1-WallVIEW 70 PTZ

Quick-Connect 4

ProductionVIEW

S-Video

Audio

Triggers Up to 12 Total

Push to Talk AT MicsUp to 12 Total

Mic Cables

S-Video

2-Wire Triggers

S-Video

2-Cat 5 Cables(Video/Power and Control)

MicVIEW

Cat 5 Cables2-per Camera(Video/Power & Control)

TrackVIEW 70 System Integrated with ProductionVIEW, WallVIEW, Quick-Connect 4 and MicVIEW