8/2/2019 March Training Prog.-latest

http://slidepdf.com/reader/full/march-training-prog-latest 1/2

5 Days Non Residential

Mechanical Design and Analysis of Pressure Vessels andAboveground Storage Tanks from First Principle (to code) and

Using Sant'Ambrogio-NextGen / AMETankSoftware respectively; and Tank Farm.

March 26th – 30th 20129am – 4:30pm Daily

LCCI Building, 2nd Floor CSSL,

No 10 Dr Nurudeen Olowopopo Way, BesidesMarwa Gardens, Alausa- Ikeja, Lagos Nigeria

Course Fee

Regular Course Fee(Non Residential)Lagos, March26th – 30th, 2012

Category Amount

N131, 250

Regular Course Fee

(Residential)BeninMay 7 – 11th 2012

N168,000

VATInclusive

VATInclusive

Discount can be negotiated for Companiessending more than 5 DelegatesContact us @: info@core-globalservices.com.ngfor detailed quotation and invoicing.We have special discount for Nigerian Corp Memberson self sponsorship. Call +234 (0) 8083 469 170

This cost will cover Hotel Accommodation for the

five days; Lunch and access to Hotel recreation facilities

HOW TO REGISTERComplete the registration Form online or fill out the hard copy of this form and send toinfo@core-globalservices.com.ng orAn acknowledgement will be sent back to you in less than 24hours.Final confirmation of your booking and all details of the course will be emailed to you on receipt of fullpayment for the course.Please Note: Payment has to be made in full prior to commencement of the course and Forms are to be

completed by each delegate and duly submitted.

CONDITIONS FOR REGISTRATIONAll cancellation must be by writing to training@core-globalservices.com.ng . Phone calls and textmessages will not be accepted.Cancellations are accepted in writing and without penalty up to 15 working days prior to the start of thetraining. There will be no refund in the event of total absence from the training without prior notice.Delegates cancelling in writing between 5 – 10days prior to the start of the training will be liable for30% of the Course fee excluding VAT.Delegates cancelling in writing less than 5 days prior to start of the training shall be liable for 50% of thecourse fee.Full payment needs to be received at least 10 days prior to the training date in order to secure abooking.Payments will not be accepted once class size is attained, however on special arrangement delegatesmight be rescheduled for the next training session.

In case of insufficient delegates, CORE global services limited may consider postponing or canceling thiscourse whichever is most appropriate. This implies that registered delegates will be duly notified and anypayment will be refunded where need be or course can be re-scheduled accordingly.

services limited RC 924111

o 

Telephone: +234 (0) 8083 469 170 Email: info@core-globalservices.com.ng. www.core-globalservices.com.ngOur Training/Contact Location: CORE GLOBAL SERVICES LIMITED,

LCCI Building, C/o CSSL, 2nd Floor, Plot 10 Dr Nurudeen Olowopopo Way,Beside Marwa Gardens Alausa, Ikeja, Lagos, Nigeria, West Africa.

services limited RC 924111

o 

Training Engineering Design Software Manpower Supply

8/2/2019 March Training Prog.-latest

http://slidepdf.com/reader/full/march-training-prog-latest 2/2

COURSE BRIEF / SCOPE

With the Federal Government's recent commitment to enforcement of deregulation in the downstream sector, andthe impending passage of the Petroleum Industry Bill, opportunities that will abound in the downstream sectorshall translate directly to proliferations of Tank Farms by private investors, revamping of existing Refineries forpossible expansion and overall plant efficiency improvement; engineering, construction and commissioning ofnew Refineries to mention but a few. The upstream sector will witness much expansion as well because of the highand competitive demand for the product – “CRUDE OIL” like never before.In its simplest form, these boundless opport unities shall crystallize into enormous Engineering Projects in Nigeriaand the West African Hub, many of which shall entail engineering (and/or re-rating of existing static equipment),fabrication/construction and commissioning of Pressure vessels and Aboveground Storage (shop or field

erected) Tanks in particular.

Pressure Vessels and Aboveground Storage (Shop/Field erected) Tanks are static equipments within the facilit ywith so great a significance because of the enormous cost involved in their engineering, procurement and/orfabrication and erection. Both the Purchaser, the Contractor and Regulatory bodies (e.g. DPR's interest in issuinglicense for a tank farm) involved in the designing, construction and/or Inspection these of equipment must do sowith high level of professionalism hence the need for continuous training in this subject es pecially as it applies tolatest technology involved in designing and analyzing these equipments (models) before actual Fabrication. Thedemand on all stakeholders will increase. Demand in product availability; Demand on technical proficiency indesigning Pressure Vessels and Tanks, Demand in Pressure Vessel and Tank Inspection amongst others.

This course is to prepare participants for the tremendous opportunities that will emanate from the current directionof the Federal Government especially in the downstream sector and the high level of demand on technicalproficiency in Pressure Vessels and AST Design and Analysis as well as general Tank Farm Operations.

It has been carefully designed to expose participants to the basics of Pressure Vessel / AST Design andAnalysis from First Principles using ASME, PD5000, Europe's EN13445 and API Standards. It covers typicaldesign of Pressure vessels to ASME Div 1 and 2, PD 5500, EN 13445 Codes as well as AbovegroundStorage Tanks to API 650, API 620, API 653, and UL 142 amongst others. The Course considers an in-depthanalysis and a comparative study of the peculiarity of these codes over each other.Course prepares prospective Pressure Vessel and tank Inspector for their respective preparatory class andsubsequent exams because it addresses the basic principles for these courses (API 653; Tank InspectionCourse, and API 510; Pressure Vessel Inspector Course)An Introduction to Tank Farm and Tank Farm operations is a new feature in this course. To participants thathave been in Tank Farm Business, this is a refresher course that will expose them to latest technology in TankDesigns and Tank Farm OperationsThis Course shall offer participants the classical opportunity to be trained on AMETank (ETank2000 the baseversion of AMETank), AMPreVA, and Sant'Ambrogio NextGen which designs to ASME Div 1 and 2 + otherCodes

TRAINING METHODOLOGY Course shall entail 60% of Lectures, 25% of Group Works, Project Scenario/Case-studies and Practical Exercisesand 15% Videos and Hands-on work using latest Engineering Design Software.Participant will be provided with Training materials, Free Brochure,Free Etank2000 Demo CD, lunch, group photograph and tea Breaks.

WHO SHOULD ATTEND? Engineering Designers, Tank Farm Operators, Engineers,

Supervisors and Managers? Prospective Pressure Vessel and Aboveground Storage Tank Inspectors? Project Engineers, Project Managers? Fabricators / Construction Engineers

TOPICS TO BE COVERED INCLUDE (BUT NOT LIMITED TO):

?Overview of Pressure Vessels?ASME VIII Div 1 Code Overview?Internal Pressure on Shell and Head?External Pressure on Shell and Head?Group Exercise / Classwork

DAY 1

?Nozzle reinforcement and Calculations?Cones and Conical Sections?Welded Flat Heads?Flange Design, Analysis and Selection in

accordance to B16.5, B16.7?Gasket and Bolting: General Overview?

Heat Exchangers?Half –Pipe Jackets?Large Openings?Local Stresses in accordance to WRC Bulletins

107/297?Horizontal Vessels on Horizontal Supports

Saddles?Tall Vertical Towers?Wind and seismic Loads?Load Combinations?Skirts and Base Ring Design?Vibration Analysis?Support Legs, Support Lugs and Lifting Lugs?Welds

DAY 2

?Fracture Mechanics Theory?Control of fracture?Thermal Stress?Control of Corrosion?In-depth Analysis of PD 5500, ASME Div

1&2 and EN13445: Webinar Presentationcourtesy Dr. Lidonnici, DirectorSant'Ambrogio International, Italy.?Comparison of these Codes?Project Scenario/Case Study Group Work?Modeling session using Sant'Ambrogio

NextGen Software?Overview of Storage tanks

?Storage Tanks and Tank Features?Tank Codes and Standards?Mechanical Design Requirement?Mechanical Design Parameters?Tank Sizing?Introduction to API 650, API 620, API 653

and UL 142

DAY 3

?Tank Shell Design* One Foot Method* Variable Design Point Method?Bottom Plate Design?Roof Design?Loadings

* Wind load Calculation: Top Girder,Intermediate Girder, Condition for TankStability

* Seismic Load Calculation: OverturningMoment, Resistance to Overturning Moment,Tank Anchorage etc

?

Tank Nozzle Reinforcement / NozzleCalculations?Modeling session using ETank2000 (Base

Version of AMETank)

DAY 4

DAY 5

?Skills in Preparing Tank Calculation Sheet andDatasheet?Preparing Requisition for Storage Tanks?Elevated and Underground Tanks: Brief

introduction and Design Methodology?Working on a Tank Farm Project: Expectations

from Clients and Design Contractors?Introduction to Tank Inspection, Alterations

and Repairs as per API 653?Examination (15minutes)?Tank Foundations?Fire Prevention in Tanks?Corrosion and Corrosion Prevention

S ma r t  c a s u a l  w e a r  i s  s u g g e s t e d  a l o ng  w i t h a  s w e a t e r  o r   j a c k e t  i n c a s e  t r a i ni ng  r o o m i s  t o o  c o l d .

D R E S S  C O D E