marine-joinery-outfitting.pdf
TRANSCRIPT
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
MARINE JOINERY OUTFITTING
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
NoViComp - Damped “ Noiseless” Aluminum
Description NoViComp is a lightweight metal sandwich plate consisting of 2 alumi-num sheets bonded with a visco-elastic mastic layer. NoViComp of-fers very good airborne noise insula-tion and structural damping loss up to 20 dBa over plain solid metal sheet. NoViComp reflects sound energy back into machinery spaces and away from living accommodations. NoViComp's smooth surface is pre-ferred over typical perforated plate to improve fire resistance, aesthet-ics and cleanability.
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
NoViComp -Lite PE Damped Aluminum Composite Plate
Description NoViComp-Lite panels consist of very thin (0.25mm) aluminum skins bonded to a tough low density thermoplastic core. Available in either solid core at 2 & 3 mm total thickness. NoViComp-Lite panels offers superior air-borne noise insulation and damping losses over plain solid metal sheet. Increased damping loss produces a more comfortable sound deadening as compared to solid sheet metal surfaces. FIRE TESTING: - ASTM E84 - zero flame spread, fuel contri-bution and smoke density. - Surface burning :NFPA Class A and UBC Class 1. - UL 94 - V-0 rating NoViComp-Lite panels are easily fabricated by saw or router. Corners and box shapes can be formed by partial routing through back skin into core to produce a “hinge” fold. At-tachment by rivet, screw or adhesive bond with 3M-VHB tape. Resistant to water, oil, fuel and diluted acids. Service temperatures from –20 °C up to 120 °C
SOUND TRANSMISSION AND VIBRATION CHARACTERISTICS Sound Transmission Class - ASTM E-90. Vibration damping loss factor - ASTM STP-378.
Thickness Loss Factor @ 100 Hz STC Rating 2mm .060 25 3mm .280 28
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
Description Millennium Metal is a micro perforated alumi-
num sheet that provides ideal airflow resis-
tance to optimally absorb sound. Low Fre-
quency Absorption can be “Tuned” by increas-
ing the trapped air space behind it.
Absorption is further enhanced by adding No-
ViTec Melamine Foam into the air cavity which
resists the coupled volume resonances com-
mon in the low frequency region
Millennium Metal , in combination with a hon-
eycomb core and NoViComp composite panel
outer skin creates a superior lightweight rigid
acoustical panel which can be used to make
unframed acoustical enclosures with excellent
absorption and sound transmission properties
Millennium Metal - Micro-perforated Metal Lining Sheet
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
NoVi-Flex Resilient Isolation Damping Sheet
Description
•Used for decoupling and isolation of interior and deck con-struction
•Gauged to support and isolate horizontal and vertical loads from structure borne noise transmission.
•Minimal long term compression set
•High chemical resistance
•Excellent choice for bedding of tanks and equipment pallets.
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
DRUMARKON– BISCO IMO-MSC 61(67) Resilient Isolation Damping Sheet
THERMAL- ACOUSTIC CONTROL MATERIALS
Iso-Cor - Cork/Elastomer Composite Damping Sheet
Description
• Provides Isolation, Damping , Barrier and Absorption
•Excellent underlayment for teak decks and stone floors
•Sandwich core in bulkhead and sole panels
• Laminate within FRP composite structure
•Easily cut with a razor knife or band saw
•Install using urethane adhesives.
•Fairly resistant to water, moisture, oil and fuel
Key Points
•Available in a wide variety of densities and elastomeric
properties, each exhibiting a specific acoustical profile.
• Used extensively in Superyacht interiors worldwide.
• Cost, Weight and Space effective acoustical solution
Sizes
•3mm (1/8”) , 4mm (3/16”) , 6mm ( 1/4”) , 9mm ( 3/8”)
•Typical sheet size 1220mm x 2440mm ( 4’ x 8’ )
Type Density Color Shore-A Elongation Compressibility
IsoCor-01 450 kg/m3 Black 15-25 >30% 50-60%
IsoCor-15 650 kg/m3 Brown 50-65 > 15% 35-50%
IsoCor-29 200 kg/m3 Lt.Brown 40-60 > 15% 20-35%
IsoCor-17 950 kg/m3 Black 65-75 > 100% 20-30%
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
NoViPanel- A (Standard)
NoViPanel- AA (High Transmission Loss)
NoViPanel- D (Foam Core only)
Description Ready-to-use laminated panels for interior partitioning, floating floors and furniture joinery consisting of marine quality Wa-ter/Boil/Proof cover plates combined with foam or honeycomb core and acoustic barrier layers. Several types are available and have superior transmission loss and dampening as compared to standard plywood. The barrier core sheet is a flexible sound-absorbing sheet. The open-cell core structure in combination with a Urethane Type 1 resilient glue provides structural adhesive strength and sufficient flexibility to improve the acoustic properties. Panels can be veneered directly.
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
PolyCore – Polypropylene Honeycomb
Description PolyCore polypropylene honeycomb core’s unique cell structure has 3 ori-entations vs. 2 orientations common with other honeycomb, making it’s properties more uniform. Each cell has a tubular form and is inherently stable. PolyCore is supplied with or without a non-woven polyester veil for better bonding. It is also supplied with or without a film barrier under the poly-ester veil to limit the amount of resin consumption in Infused Resin appli-cations.
Key Selling Points • - High Strength to Weight Ratio • - Corrosion, Fungi, Rot Chemical,
- - Moisture resistant. • - Sound and vibration damping • - Energy Absorbing • - Thermoformable • - Temperature use to 180 degF • - Recyclable Product Description
Compression Strength
Compression Modulus
Shear Strength
Shear Modulus
Tensile Strength
Identification*
Cell Size
Density
HC48-5
0.30”
5 pcf
235 psi
10.5 ksi
75 psi
2.0 ksi
175 psi
HC48-4 0.40”
4 pcf
140 psi
7.2 ksi
40 psi
1.3 ksi
125 psi
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
NoViFloor -250 250 kg/m3 core NoViFloor- 650 650 kg/m3 core
NoViFloor- 920 920 kg/m3 core NoViFloor - X 1800 kg/m3 core
Description NoViFloor SonoPanels are widely used as floating sole and acoustic partition panels on board yachts. Other applications are as sheathing for sound enclosures, cockpit decking and floor panels in motor coach and rail transport. Applications.
NoViFloor 250 250 250 250 4/4/4 (12mm) - 5.3 kg/m2 6/4/6 (16mm) – 7.6 kg/m2 9/4/9 (22mm) – 11.0 kg/m2 NoViFloor 650 650 650 650 4/4/4 (12mm) – 6.9 kg/m2 6/4/6 (16mm) – 9.2 kg/m2 9/4/9 (22mm)- 12.6 kg/m2 NoViFloor 920 920 920 920 4/4/4 (12mm) – 7.9 kg/m2 6/4/6 (16mm) – 10.2 kg/m2 9/4/9 (22mm)- 13.6 kg/m2 NoViFloor X X X X 4/4/4 (12mm) – 11.5 kg/m2 6/4/6 (16mm) – 13.8 kg/m2 9/4/9 (22mm)- 17.2 kg/m2
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ProMarine 640 and 450 Fire Rated Joiner Panels
ProMarine-640 and ProMarine-450 panels are supplied as a system to meet A, B
and C-Class Shipboard Fire Divisions with a full selection of Fire Rated HPL or natural wood veneers. A complete range of install joining profiles and custom cutting to suit
any shipboard or offshore platform requirement is available.
ProMarine-640 and ProMarine-450 Are manufactured using autoclaved Calcium
Silicate reinforced with selected minerals and fibers. The panels contain no asbestos.
ProMarine-640 and the lighter weight
ProMarine-450 have been successfully tested to IMO Res. A799 (19) and A754 (18). Both
panel configurations also comply fully with the requirements of Marine Equipment Directive
96/98/EC (amended by Directive 98/95 and Di-rective 2001/53. Modules B&D and Type Ap-
proval.
Certificates are available on request
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ProMarine 640 and 450 Fire Rated Joiner Panels
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
DRUMARKON C-Class Non Combustible Joiner Core Panel
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
Aluminum and NOMEX Honeycomb Marine Panels Fabricated to meet MIL Spec for US Navy and Coast Guard applica-tions and MED Certificated C-Class ( Non Combustible) under IMO/
SOLAS for Commercial HSC and Yachts.. Available with either Nomex or Honeycomb core and a wide variety of surface leaf configurations
such as: Aluminum, Stainless Steel, FRP, Carbon Fibre, HPL laminate, Epoxy paint systems , decorative melamine, solid surface, natural
stone and pre-finished natural wood veneers. We have the engineer-ing expertise to work with joiner contractors and or directly with ship-yards. Choose from blanks or custom fabricated interior doors, bulk-
head and sanitary partitions, false decking, table tops and more.
C-Class Joiner Doors
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
DRUMARKON Lightweight Low Flame Spread Joiner Core Panel
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
DRUMARKON B15 Floating Floor System
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
Joiner Panels B15, B30, A15, A60 Joiner Doors B-Class Ceilings
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B0, B15, B30 Joiner Panels C-Class and B-Class Ceilings
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B0, B15, B30 Joiner Panels C-Class and B-Class Ceilings
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B0, B15, B30 Joiner Panels C-Class and B-Class Ceilings
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B0, B15, B30 Joiner Panels C-Class and B-Class Ceilings
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B0, B15, B30 Joiner Panels C-Class and B-Class Ceilings
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B0, B15, B30 Joiner Panels C-Class and B-Class Ceilings
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B0, B15, B30 Joiner Panels C-Class and B-Class Ceilings
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B0, B15, B30 Joiner Panels C-Class and B-Class Ceilings
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B0, B15, B30, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B0, B15, B30, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
ALVEDOOR
B15, B30, A15, A60 Joiner Doors Single Leaf, Double Leaf, Sliding
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
Resilient Mounting Hardware
CONTACT: Steve Hadik— Insulation Specialist
207-371-1602 direct [email protected]
bst - firestop Cable and Piping Seal Systems