Mario's HatBy: -Pixel Kakashi

http://pixel-kakashi.blogspot.com

Here are the instructions for Mario's hat,

The parts are layed out as below:

Cut out parts toA1 A5

*Note: You don't need to score the folds, just the tabs on A3

Glue to using the graphic from the last pageas reference

A1 A3

Now glue to the firstA2 two parts

Now glue part A4

Now you got the first part of the hat

Now cut out parts toB1 B4

A1B1

Next glue to like in the picture belowB1 A1

Do the same with andB2 A2

Glue to the parts you just glued ( + )B3 B1A1

Do the same with on the other sideB4

Now cut and (they look like eyebrows, I know)B9 B10

Glue under and underB9 B3 B10 B4

From now on, the model is pretty straight foreward,there's only 4 pieces left on the sheet, so cut them

out and glue them in order to form the "M"

Keep glueing the other parts in order( and )C1-C6 D1-D6

C1

C2

C3

C4

C5C6

D6

D5

D4

D3

D2

D1

Now cut andC7-C9 D7-D9 and glue themto the back

C7C8

C9

D7D8

D9

It's almost over now, just a few more pieces,it's quite simple, just keep glueing them in order.

And we're done!

Now you can enjoy your very own Mario Hat

Thanks for building this model.

http://pixel-kakashi.blogspot.com

http://pixel-kakashi.blogspot.com

http://pixel-kakashi.blogspot.com

http://pixel-kakashi.blogspot.com