marker and chalk boards - sweetssweets.construction.com/swts_content_files/53744/4966...hooks, flip...
TRANSCRIPT
MARKER ANDCHALK BOARDS
TACK BOARDS
COMBINATIONBOARDS
PORTABLE BOARDS
HORIZONTALSLIDERS
VERTICAL SLIDERS
PRESENTATIONWALLS
LECTURE CABINETS
“Quality Visual Communication Surfaces for Every Environment”
10 11 00/KPRBuyLine 4966
4966-10_K-PRO Inc.qxp:4966_K-PRO Inc. 9/8/09 11:24 AM Page 1
Writing Surface
Tack Surface
413Almond
826Silver
605Blue
002Black
• Excellent chalk and marker pen adherence• Erases easily with soft dry cloth or felt eraser• Very little glare with minimal surface distortion• Porcelain Ceramic surface is Acid, Fire,Stain and Scratch resistant
Core Options:• Fiberboard• Particleboard
Trim Options:• Satin, Bronze or Black anodized
or painted aluminum• Wood Framed
J-TrimNarrowtrim
EZ Hang trimDeluxe Trim
Blade Tray Box Tray
1” Maprail
2” Maprail
Availablewith tan orgray insert
More options at www.K-ProSteel.com
PROSTEEL CHALK AND MARKER BOARDS FEATURE THE NEW PORCELAINON STEEL PRESENTATION SURFACE WITH QUALITY AND PERFORMANCECHARACTERISTICS UNSURPASSED IN THE MARKETPLACE:
Portables
Typical configurations of surfaces:
Combination Boards
• Excellent chalk and marker pen adherence• Erases easily with soft dry cloth or felt eraser• Very little glare with minimal surface distortion• Porcelain Ceramic surface is Acid, Fire,Stain and Scratch resistant
ANY Size in one piece up to 5’H X 16’WOversized see Combination boards below.Panels: 3-ply with min. 005” aluminumbacker.
Facing Options:• 28GA or 24 GA porcelain steel• Marker or Chalk colors• Porcelain Fused Graphics
Custom built mobile presentation unitsdesigned for versatility and durability.Weather resistant with all aluminumframe.
Features:
• Static or Reversible Board with lock-pinsystem
• 4’ high double-sided magnetic panels• 6’ tall & up to 10' wide overall• Locking Caster Wheels
Facing Options:(pick any two)
• ProSteel Marker• ProSteel Chalk• ProCork Colors• ProTak Fabric or Vinyl• Graphics
Options:
• Telescopic Legs(extra stability)
• Attached Tray• Magnetic Tray
Presentation Walls
Marker & Chalk Boards
Virtually unlimited sizes ofmarker, chalk or tacksurfaces in satin, bronze orpainted trim with inside & out-side corners installed floor toceiling.
• Porcelain Ceramic surface will maintain itsqualities for 50 years or the LIFE of its installation
• Requires minimal care and maintenance• Steel substrate holds magnets andmagnetic teaching aids
• Resurfacing grade sheets available• Available in a variety of colors
• Porcelain Ceramic surface will maintain itsqualities for 50 years or the LIFE of its installation
• Requires minimal care and maintenance• Steel substrate holds magnets andmagnetic teaching aids
• Resurfacing grade sheets available• Available in a variety of colors
Installation Systems:
• Snap On Trim• JTrim (shown)• EZ Hang & Clip
by
2 T: 330.668.1515 | F: 330.668.1513 | www.k-prosteel.com
PROSTEEL CHALK AND MARKER BOARDS FEATURE THE NEW PORCELAINON STEEL PRESENTATION SURFACE WITH QUALITY AND PERFORMANCECHARACTERISTICS UNSURPASSED IN THE MARKETPLACE:
visit our website or www.sweets.com for ready-to-edit architectural specifications & shop drawings
938White P
ROSTEELMarke
rboardColors
814Slate
515Green
601Sapphire
001Black
PROSTEELChalkb
oardColors
Housing Options:• Plywood/veneer, Plywood/laminate,
or finished hardwood• Custom sizes up to 6' wide• Optional Projection Screen & roller
cover panel (shown)
Panel Options:• Doors in-set panel: Marker Board,
or fabric covered Tack Board• Center panel typically marker board
Accessories:Tack strip with Tan or Gray cork, maphooks, flip chart, markers & erasers
Vertical Sliders
All Tackboards made in one pieceup to 4’ high or 16’ wide. Largersizes require custom quotation.
Facing Options:
• 1/4” ProCork colors• 1/8” or 1/4” ProCork Natural• ProTak Vinyl: 24 colors available at
22oz./sq.yd.• ProTak Fabric: woven polyester
Core Options:
• Fiberboard• Hardboard• 1/8” or 1/4” Cork Underlaminate
Trim Options:• J-Trim, EZ Hang, Deluxe or other
• Satin or Bronze anodized aluminumor painted
• Wood Frame
Horizontal Sliders
Sliding units are designed to maximize your workspace by addingmultiple levels of working area ... custom built to your specifications.Sliding panels glide with ease on precise counter-weight & bearing/track systems. Typical Vertical System consist of 4 1/2" widealuminum frame, fixed rear panel with 2 sliding panels.Slim Housing available with 2.75" face.
Lecture Cabinets
Housing Options:
• Wall or floor mounted• Surface mounted or recessed• Manually Operated or Motorized.• Box or Blade tray• Satin anodized aluminum or painted• Headerless (uprights only)
Tack Boards
Sliding Panel Versions:A. Top-Hung:• Panels travel on a roller/track system
with guides at the bottom.
• Housing size up to 24’ Wide.
• Up to 4 sliding tracks.
B. Bottom Supported:• Panels ride on a sheave bearingsystem along a bottom track with rollerguides at the top.
• Sizes vary by weight & field conditions.
• Ideal for full wall height sliding panels.
Housing Options:
• Satin anodized or painted• 3" to 6" deep with 1.75”
to 2” face
Other Options:
• Maprail with tan or graycork insert
• Box or Blade Trays• Marker, Chalk or tack
surfaces
Panel Options:
• 1-3 Sliding panels madewith HoneyComb core
• Backpanel• Kick Panel
Panel Facing Options:• Marker or Chalk• Laminate• Cork• Fabric or Vinyl
Housing is constructed with heavy gauge aluminum. Sliding panelsglide easily with its roller-bearing & guide systems.
10 11 00/KPRBuyLine 4966
T: 330.668.1515 | F: 330.668.1513 | www.k-prosteel.com 3
2182Chalk Gray
2185Fed Blue
2201Brick
2166Tan
POPULARPROCORKColors
150Wedgewood
488Dark Spruce
402GreenNeutral
380Quartz
PopularPROTA
KFabrics
071Tahoe
031Natural
061HollywoodRed
091GrayFeather
PopularPROTA
KVinyls
PROCORK
Natural
MAGNETIC TRAYup to 12’ long
FLAGHOLDER#2
MAPWINDERS#1
FLAGHOLDER#1
HOOK/CLIP#1
HOOK/CLIP#2
MAPWINDERS#2
For additional information, contact us via e-mail,visit our website or www.sweets.com
Display Rail & Accessories
Dry Erase Markers & Eraserscustom imprinting available
Eeco Clean - ACMI AP CertifiedMarkerboard Cleaner
Web: www.k-prosteel.comE-mail: [email protected]
P.O. BOX 731BATH, OHIO 44210-0731T 330-668-1515F 330-668-1513
PROSTEEL Marker and Chalk Board Specifications1
Coating Thickness ≥ 60 microns face≥ 15 microns base
Base Metal Ultra Low Carbon SteelFiring Temperature 1440° F (800° C)Surface Hardness POH 6.0+Solvent Resistance Not AffectedAcid Resistance Not AffectedAlkali Resistance Not AffectedSurface Abrasion / Scratch Resistance 60 MG @ 1000 RPMSurface Smoothness 25-29 Wd Wave ScaNNotes1 Meets or exceeds Porcelain Enamel Institute requirements for the factors listed
PROSTEELManufacturing PROCESS
Limited WarrantyPROSTEEL is warranted to maintain its originalwriting and erasing qualities for the next 50years or the life of its original installation. INADDITION, the surface is warranted to remainintact, without crazing, cracking or peeling overthe same warranty period. THIS WARRANTY isLIMITED to manufacturer’s defects and does notcover malicious destruction, improper handlingor maintenance, and use or wear other than theoriginal purpose for which it was intended.
Should a defect occur, the MANUFACTURERwill repair or replace, at its discretion, thewriting surface. OBLIGATION will be limitedto the delivery of repaired or new parts to theoriginal installation site, without charge.
If you should encounter any problem, please con-tact our office directly, or the office of theinstalling dealer / contractor.
Cleaning and MaintenanceAn initial cleaning of your PROSTEEL MARKER or CHALK BOARD should be performed to ensure that no residual film or abrasive residues arepresent to damage the surface. NEVER use any abrasive materials on these surfaces as they would cause permanent damage.
ErasingUse a soft cloth or felt eraser of #2 quality or better.
WritingMarkerboards: use only DRY ERASE MARKERS. Chalkboards: use CHALK designed for easy erasure. We strongly recommend whitechalk with 95% chalk content and only 5% binder. Low dust and color chalks have higher binder content and can leave permanent marks.
CleaningWash your marker or chalkboard periodically to eliminate problems from built up dust or other contaminants. Markerboards: use any liquidammonia- added cleaner. RINSE with clear water and DRY your board with a soft towel. Chalkboards: use clear cool water. RINSE with clearwater and DRY your board with a soft towel. Note that the writing and erasing qualities will improve with time as your new product “seasons”through continued use. For stubborn residue, use mild solvent or denatured rubbing alcohol. Gently work on your stain in a circular motion.