marketing extension guide
DESCRIPTION
TRANSCRIPT
ISSN 1020-7317
4Marketing Extension Guide
Planning and designingRURAL MARKETS
For further copies of this publicationand for information on FAO’s activities
related to agricultural marketingplease contact:
Agricultural Marketing GroupAgricultural Support Systems Division
Food and Agriculture Organization of the United NationsViale delle Terme di Caracalla
00100 Rome, Italy
Fax: (+39)-06 57056850E-mail: [email protected]
http://www.fao.org/ag/AGS/subjects/en/agmarket/agmarket.html
4
Planning and designingRURAL MARKETS
FOOD AND AGRICULTURE ORGANIZATION OF THE UNITED NATIONSRome 2003
byJohn Tracey-White
Marketing Extension Guide
All rights reserved. Reproduction and dissemination of material in thisinformation product for educational or other non-commercial purposes areauthorized without any prior written permission from the copyright holdersprovided the source is fully acknowledged. Reproduction of material in thisinformation product for resale or other commercial purposes is prohibitedwithout written permission of the copyright holders. Applications for suchpermission should be addressed to the Chief, Publishing ManagementService, Information Division, FAO, Viale delle Terme di Caracalla, 00100Rome, Italy or by e-mail to [email protected]
© FAO 2003
The designations employed and the presentation of material in thisinformation product do not imply the expression of any opinionwhatsoever on the part of the Food and Agriculture Organizationof the United Nations concerning the legal or development statusof any country, territory, city or area or of its authorities, orconcerning the delimitation of its frontiers or boundaries.
Preface
Upgrading rural markets is one way to improve accessto marketing opportunities. This guide is designed toassist community planners, rural engineers andagricultural extension units to formulate and implementrelevant market development plans.
The types of issues covered in this guide includedesigning markets that meet a community's social andeconomic needs; working with communities to identifytheir marketing problems and to choose a site for a newmarket; using appropriate and simple methods to surveyand plan the site layout and to design market buildings;preparing a market development proposal and makingbudget estimates; undertaking simple social andeconomic feasibility studies; looking for financing andconstructing the market; and managing, operating andmaintaining the market.
iii
Contents
Preface .............................................................. iiiAcknowledgements .......................................... viii
Introduction ........................................................ 11 Identifying the need for rural markets ................ 52 Assessing market trading requirements .......... 173 Working with farmers and traders .................... 254 Identifying the space required ......................... 335 Choosing the right site ..................................... 436 Preparing the site plan ..................................... 537 Deciding on the buildings
and equipment needed .................................... 658 Checking the market’s viability ......................... 799 Constructing the market .................................. 89
10 Operating and maintaining the market ............ 97
Annexes ......................................................... 105Glossary ......................................................... 117Further reading .............................................. 119
v
Figures
1 Outline of work for the planning, design and construction of rural markets .......... 2
2 Examples of marketing channels ..................... 103 Central places in a rural area .......................... 134 Market location characteristics ........................ 465 Market site analysis ......................................... 486 Basic layouts of rural markets .......................... 587 Example of a rural market site plan ................. 638 Design of market stalls .................................... 689 Layout of market buildings ............................... 70
10 Market infrastructure and facilities ................... 74
Tables
1 Types of rural market intervention ................... 152 Calculation of future market throughput .......... 223 Market needs assessment
and ranking of users’ priorities ......................... 314 Sales space calculation
for a basic rural market .................................... 355 Estimating trading spaces
for a basic rural market .................................... 376 Estimating overall land uses ............................ 417 Site analysis
– example of ranking alternatives .................... 508 Market development costs ............................... 829 Annual market recurrent costs ......................... 83
10 Annual market benefits .................................... 8411 Viability of a simple market development ........ 86
vi
Annexes
A Survey checklist ............................................. 106B Assessment of supply and demand ............... 109C Infrastructure design and space standards ... 115
Forms (Annex B)
1 Estimating local farm production ................... 1092 Estimating use of market outlets ................... 1103 Average annual food consumption ................ 1114 Annual farm household food needs ............... 1125 Total annual farm use .................................... 1126 Marketable annual surplus or deficit .............. 1137 Annual sales apart from rural markets .......... 1138 Annual market throughput ............................. 114
vii
Acknowledgements
The author would like to acknowledge the assistanceprovided by FAO’s Agricultural Marketing Group. AndrewShepherd acted as overall technical editor and EdwardSeidler provided comments on the draft texts. FrancescaCabré Aguilar revised the text. In Bhutan Peter Schmidtand Chris Butters were responsible for early drafts of anumber of the illustrations. Tom Laughlin wasresponsible for the overall graphic design of the manual.
viii
Introduction
This guide is intended to provide a step-by-stepapproach to the planning, design and construction ofsimple rural markets. Whether the market is to be builtby national or local government, by donors, by a localcommunity or privately, the assistance of extensiondepartments, planners and rural engineers will berequired. Such assistance is likely to include:
j identifying marketing problems and needs;j helping with selection of market sites;j planning, implementing and operating effective
market improvement activities; andj following up and evaluating the results of the
development.
The guide follows the development process fromidentification of the need for a market through tooperation of that market. Although each stage in theprocess is presented as a separate chapter the stagesare not necessarily independent of each other. Adiagram of the planning process is shown on pages 2and 3 (Figure 1) with a brief description of each stageand indications of where findings may be used to modifythe work of previous stages. An outline of all stages andsteps is shown on page 4. 1
STAGE 1IDENTIFYING THE NEED FOR RURAL MARKETS The process starts with
understanding the marketing system and the different
types of rural markets as well as their relationship to
settlement patterns. This understanding is then used
to identify the need for market improvements.
STAGE 2ASSESSING MARKETTRADING CONDITIONS
The next stage is to assess probable supply and demand conditions for the identified markets. Limited surveys
may be required to estimate market throughput, so as to
allow design to proceed
STAGE 4IDENTIFYING
THE SPACE REQUIREDData collected through
consultation with existing or potential users, field surveys and desk studies of existing information are analysed to
decide what space andmarket accommodation is
required.
STAGE 5CHOOSING
THE RIGHT SITEThe next stage is to agree on
the market site location, identify any potential
problems and decide on whether an environmental
impact assessment isneeded. Different options may be assessed and the site availability checked.
STAGE 3WORKING WITH
FARMERS AND TRADERSConsultations are
undertaken with market users and local communities
to identify their presentproblems and future needs - leading to proposals on how these might be met. Special needs, such as targeting of particular groups, may also
be considered.
Note: Initial conclusionsregarding the need for market
improvements (Stage 1) may be altered either after an
assessment of market supplies is made (Stage 2) or after detailedconsultations with users (Stage 3).
Possible feedback
Planning stages
KEY
Only if market already exists
2
Figure 1Outline of work for the planning,design and construction of rural markets
STAGE 7DECIDING ON THE BUILDINGS AND
EQUIPMENT NEEDEDNext comes the detailed design of buildings, stalls
and equipment. In discussion with the users, the various
options that are available are identified and their relative
advantages assessed
STAGE 8CHECKING THE
MARKET’S VIABILITYCost estimates are preparedand an assessment is made
of the market’s viability. Sometimes it is necessary at
this stage to look again atthe design and make
modifications. STAGE 10OPERATING
AND MAINTAININGTHE MARKET
Finally, the market needs to be put into operation; space must be let, fees collected
and market operations regulated.
STAGE 9CONSTRUCTING
THE MARKETSources of funding areconfirmed and designs
finalized with users. Tender documents are prepared,followed by tendering and letting of contracts. The
construction is carried out and monitored to ensure thatwhat is being done conforms
to the original design.
STAGE 6PREPARING
THE SITE PLANAfter identifying a market site, a draft master plan is prepared. This provides a
framework for all the activities that will take place
within the market
Note: Estimates of space andaccommodation (Stage 4),together with the detailed
design of buildings that flow from them (Stage 7), may need to be modified after
working out the cost of the proposed market (Stage 8).
3
4
STAGE 1IDENTIFYING THE NEED FOR RURAL
MARKETS
Steps1.1 Identify market channels in rural areas1.2 Define responsibility for decision-making1.3 Review planning considerations1.4 Identify market improvement options
STAGE 2ASSESSING MARKET TRADING
REQUIREMENTS
Steps2.1 Decide on design information needed2.2 Assess supply and demand2.3 Estimate the market's throughput
STAGE 3WORKING WITH FARMERS
AND TRADERS
Steps3.1 Consult with the users3.2 Provide support to the market committee3.3 Assess user needs
STAGE 4IDENTIFYING THE SPACE REQUIRED
Steps4.1 Estimate sales space requirements4.2 Identify trading spaces4.3 Decide on the market’s facilities4.4 Determine the area needed for the site
STAGE 8CHECKING THE MARKET’S VIABILITY
Steps8.1 Estimate development costs8.2 Estimate recurrent costs8.3 Estimate benefits8.4 Test financial viability8.5 Assess the proposals8.6 Amend the designs
STAGE 9CONSTRUCTING THE MARKET
Steps9.1 Obtain consents
and agree on the financing9.2 Prepare tender documents
and tender the works9.3 Let construction and equipment
contracts, supervise construction and monitor implementation
9.4 Confirm practical completion and evaluate the works
STAGE 10OPERATING AND MAINTAINING
THE MARKET
Steps10.1 Commission the market10.2 Agree on space allocation and leases10.3 Agree on the market fee schedule10.4 Agree on the market regulations
STAGE 5CHOOSING THE RIGHT SITE
Steps5.1 Review suitability of site locations5.2 Reviewing site features5.3 Determine if an environmental
assessment is needed5.4 Prepare an impact statement5.5 Review site options and availability
STAGE 6PREPARING THE SITE PLAN
Steps6.1 Gather design data6.2 Organize land uses6.3 Plan vehicular access and circulation6.4 Plan for supplementary uses6.5 Finalize the site plan
STAGE 7DECIDING ON THE BUILDINGS
AND EQUIPMENT NEEDED
Steps7.1 Design buildings7.2 Design infrastructure7.3 Identify environmental impact
mitigation measures7.4 Decide on market equipment
A step-by-step outline of the planning process
1 Identifying the need for rural markets
STAGE 1IDENTIFYING THE NEED FOR RURAL MARKETS
The problemAn efficient marketing system can provide better pricesto producers and improve the availability of competitivelypriced produce to consumers. In some cases newmarkets or improvements to existing markets in ruralareas can help overcome many of the marketingproblems faced. However, before considering whether tocarry out improvements to markets and what type ofimprovements to introduce, it is important to be sure thatmarkets, or lack of them, represent the main problem.Other causes of inefficient marketing could be:
j poor roads;j a lack of knowledge about marketing among farmers;j an inadequate quantity of products to attract sufficient
traders.
The benefits of marketsFormal markets in rural areas play an important role inimproving agricultural marketing. They can:
j provide a location at which farmers can meet withtraders;6
Stage 1 reviews existing marketing problems
that may be solved by either new or improved
markets, and identifies the kind of market
needed and the improvements that will most
benefit local communities. At the end of this
stage, and subject to discussions with the
existing or potential market users (see Stage 3),
it should be possible to provisionally address
the following points:
How the marketing system works and how
this relates to the local settlements.
Who would be responsible for managing
the identified market once it has been
constructed or improved.
Special planning issues that need to be
considered, such as developing markets in
particular settlements, markets associated
with particular road improvements or the
needs of special groups.
The types of marketing improvement that
are needed and where they will be
undertaken.
j increase retail competition by providing a convenientplace where farmers can meet with consumers;
j improve hygiene, if existing marketing activities arecarried out in an insanitary manner;
j reduce post-harvest losses by providing protectionfor produce from direct sunlight, rain, etc.;
j make marketing a more pleasurable activity; andj provide a focal point for rural activities.
Location for trade. Traders who buy produce fromfarmers for transport to urban markets experiencesignificant costs in travelling from farmer to farmer to buysmall quantities. This is not a major problem if farmersare situated close to major roads and traders simplydrive along the road buying from each farmer. Whenfarmers are at the end of poor quality local roads,however, traders lose considerable time. Costs are alsohigh because traders often use the same large vehiclesthat they use for journeys to urban areas, and poor roadconditions may damage those vehicles.
Farmers are also at a disadvantage because they aremore or less forced to accept the price the trader offers.They cannot compare the price they are offered with theprevailing local price because there is no local market.Even if they have access to information about the pricesin urban markets they cannot really use that knowledgeto negotiate with traders because they have no realisticidea of the costs faced by the traders in travelling to theirfarm or village.
For these reasons “assembly” markets have tendedto develop in rural areas. They provide a convenientlocation for traders to meet with farmers. In some casesthese markets operate seasonally or on only one or twodays of the week. In others, they operate more or lesscontinuously, with large-scale traders sometimesemploying agents in several such markets to buy on theirbehalf.
Retail facilities. In some countries farmers travel fromdoor to door to sell their produce. This can be timeconsuming and exhausting and may require investmentin transport, such as a bicycle. Door-to-door selling alsomakes price setting difficult because farmers have littleinformation regarding prices being charged by othersellers. Markets, on the other hand, provide a locationwhere all buyers and sellers can meet. Consumers cansee the range and prices of produce on offer and makechoices based on their preferences and income. Sellerscan take their produce to one location rather than havingto go from door to door. They can see how much of aparticular product is on offer, compare the quality of theirproduce with that of other sellers, and set their pricesaccordingly.
In order to achieve such benefits, however, marketsmust be situated in locations acceptable to both sellersand buyers. This is emphasized strongly in this guide.There have been many examples of new markets beingconstructed in unsuitable locations and never being 7
used! Existing market sites, or places where buyers andsellers meet informally (e.g. a plot of land at the side ofthe road), are usually the best places to construct newmarkets because they are clearly at locations favouredby the users.
Improve hygiene. Existing “markets” are often justareas of available land that buyers and sellers findconvenient to use. They may be well established in thesense that they have existed at the site for a long time,or they may be temporary, for example, a vacant plot ofland used until it is reclaimed by the owner for someother purpose. Either way, hygienic conditions areusually very poor. In most cases there are no toiletfacilities or running water and probably no arrangementsfor waste disposal. In the rainy or monsoon season themarket area may be extremely muddy, but sellers maydisplay their produce on the ground, with a risk ofcontamination from the soil or mud. Many municipalmarkets are like this, even though users are oftencharged a fee. Improved markets should minimize all ofthese problems. Apart from providing a healthier overallmarket environment, such improvements can reduce thedanger of food contamination.
Reduce post-harvest losses. Unimproved marketsusually lack any form of shelter. Produce is displayed andstored in the sun. Apart from conditions being verydifficult for those using the markets, the lack of protectionfrom the sun can have a major impact on the life of fresh
produce and on its nutritional value. Leafy produce, forexample, can be kept fresh by protecting it from the sunand by keeping it moist. This is not possible in marketsthat do not have either shelter or fresh water supplies.
Provide a rural focal point. Retail markets frequentlyplay an important social function. Farmers in manycountries prefer to take their own produce to marketrather than sell it to traders. The visit to the rural centreprovides them with the opportunity to buy itemsunavailable in their villages and to catch up with localnews. In many countries markets function as more thanjust trading places. They are the focal point of a ruralcentre and provide an important place where people canmeet. Markets that are attractive places to do businessdraw buyers and sellers alike. Competition is promotedamongst sellers and at the same time the sellers have alarge number of potential customers.
8
Step 1.1Identify market channels in rural areas
As a first step towards identifying requirements for newor improved rural markets it is important to understandhow existing marketing functions. The most commontransactions in rural areas are described below.
Farm-gate purchases. Purchase of produce may be onan individual basis at the farm gate. Buyers go to thefarm, usually at a pre-arranged time. In some cases,such as with fruit crops, the produce can be sold “on thetree” or “in the field” and the buyer arranges for itsharvesting. In other cases the sales may be throughmarketing groups or cooperatives. The farmers in thiscase may wait for the trader at collection centres.
Local (primary) markets. These markets are usually fordirect sales of small quantities of produce by farmers tovillage traders and rural consumers. Rural primarymarkets often form part of a network arranged on aperiodic basis, such as on a specific day of each week.They are commonly organized at a central place in avillage or district centre or beside a village’s access road.In some instances, markets in small towns also providean assembly function.
Assembly markets. Larger rural markets are foundwhere greater quantities of produce are traded, either bythe producers themselves or by traders. These“assembly” markets (gathering produce in largerquantities for onward sale to outside buyers) are oftencombined with local rural markets and are normallysituated on main highways, other local main roads ornear to ferries. Traders or collection agents working onbehalf of urban wholesalers normally purchase produce.The market operations may be year-round or seasonal,depending on the types of crops being marketed.
Direct sales to urban markets. Farmers may also taketheir produce directly to urban areas, either to a retailmarket or to a wholesale market.
Note: The diagrams in Figure 2 on pages 10 and 11show examples of how farmers market their products.
9
FARM
Farmer sells at farmgate Farmer or trader takes produce to urban markets
Farmer takes produceto local primary market
Farmer unloads produce and sells it in small quantities
to consumers
Farmer takes produce to assembly market
Buyerpurchases produce at assembly market
ASSEMBLY MARKET
LOCAL PRIMARY MARKET
RURAL
Figure 2Examples of marketing channels
10
WHOLESALE MARKETRETAIL SHOP
RETAIL MARKET
FARMERS' MARKET
Produce is unloaded, weighed and delivered
to wholesaler
Retailers purchase produce from wholesalers and take it to their shops
Retailer sells produce to consumer
Retailer sells produce to consumer
Farmer sells produce to consumer
URBAN
11
Step 1.2Define responsibility for decision-making
There is no right way to operate a rural market. Theextent to which the public sector and local communitiesare involved depends on who pays for the developmentand who maintains it. The involvement of centralgovernment in small marketing infrastructure is usuallylimited to capital expenditure, the maintenance beingundertaken by local government or the community itselfusing locally generated funds such as the market fees.A market committee (or, perhaps, a local ruraldevelopment committee) would usually be the keydecision-making body. The existing market users shouldbe closely involved with decisions about whether toimprove a market, or to develop new infrastructure (seeStage 3). Most development should involve a high levelof local initiative. Sufficient time should be given at thestart to ensure the community’s involvement in thedesign process and to establish ownership of the facility.
Step 1.3Review planning considerations
Not all villages have permanent markets and thedistance to market can vary a lot. A key concept in ruraldevelopment is how rural settlements relate to the overallpattern of towns and villages.
Relationship of markets to settlement patterns.Some settlements act as “central places”, providing thepopulation of the surrounding “catchment” area withgoods and services.They may also function as points forassembly of local farm produce for onward movement tourban areas. There are usually three levels of “centralplaces” in rural areas (see Figure 3):
j growth centres;j district centres; andj rural service centres.
1. Growth centres: major regional or provincial towns.The centre contains a range of services such as acollege, a hospital, banks, a major market (often withsome wholesaling functions) and specializedshopping facilities.
12
Provincial capital
Town Town Town
Village
VillageVillage
VillageVillage
Village13
Figure 3Central places in a rural area
Major markets
District markets(some with
assembly function)
Primary markets(periodic)
Growth centre
District centres
Ruralservice centres
14
2. District centres: rural settlements whose primaryfunction is to provide administration and to deliverpublic services. These centres might contain asecondary school, a health clinic and a market, whichcould perform assembly functions for the district. Themarket is often found close to a bus station and anumber of permanent shops.
3. Rural service centres: normally located in the centreof a village (and associated smaller villages) servinga population of around 5 000 people and an area notusually exceeding a 10-kilometer radius. Servicesprovided at such a centre could include a primaryschool, a health post or dispensary, a police post anda primary market, often operating periodically. Market“catchment” areas are often defined by bus routes (orsometimes by short river journeys) and by walkingdistance. This could be up to one hour (i.e. 5 to 6kilometres) or even more.
Planning policies. Local planning authorities may haveclear plans as to which settlements should be developedand which should not. Ranking systems are sometimesused to determine which settlements are to be givenpriority. This is often based on rural road developmentpolicies. The guidance of local planning authorities onhow to interpret such policies should always be obtainedwhen planning markets.
Step 1.4Identify market improvement options
Justification for new markets. The basic choice isusually between choosing a new site or upgrading anexisting market or trading area. The better option isnormally to improve conditions on an existing site,particularly if this can be accompanied by improvementsin the market’s management.
Deciding on rural market improvements. It isnecessary to adopt some objective criteria inconsidering options for market improvement. This willdepend on need (see Stage 3) and the market’s financialor economic viability (Stage 8). However, at an earlystage, some overall criteria must be adopted to allow apreliminary selection of markets to be made. Thefollowing are some criteria that could be used:
j Improvement or construction of only those marketsthat have an assembly function and can promoteagricultural production could be considered.
j The improvement of primary markets that have onlya local retail function, or the construction of newmarkets, might be linked to those areas with anexpanding population.
Table 1Types of rural market intervention
Type of market Reasons for undertaking improvements Ownership Possible interventions
Existing primary markets Inadequate and insanitary facilities Public Repair existing facilitieslocated in traditional rural Poor management New building and infrastructurevillage centres Production growth Private Planning assistance
Population growth Repair existing infrastructure
Primary markets in newly Production growth Public Site acquisitionplanned rural settlements Population growth New building and infrastructure
Private Planning assistanceNew infrastructure
Existing assembly markets Inadequate and insanitary facilities Public Repair existing facilitiesPoor management New building and infrastructureProduction growth Private Planning assistanceAgricultural diversification Repair existing infrastructure
New assembly markets Production growth Public Site acquisitionAgricultural diversification New building and infrastructure
Private Planning assistanceNew infrastructure
15
j Market improvements might be planned where thereare poor public health and sanitation conditions inexisting markets because of inadequate space andfacilities available in the market area.
j Improvements could depend on the willingness ofmarket traders to improve the efficiency of existingmarket operations and to accept higher rents andcharges to cover the costs.
j Emphasis could be placed on those markets wherethe private sector takes responsibility for improving
individual sheds and stalls, allowing the improvementprogramme to concentrate on upgrading “common”infrastructure (i.e. roads, paving, fencing, drainage,toilets, etc.).
An initial assessment can be made using thesecriteria.This will reduce the need to cover all the marketsin an area and should simplify the design process. Asimple chart could be drawn up to classify the potentialmarket interventions, as shown in Table 1.
2 Assessing market trading requirements
STAGE 2ASSESSING MARKET TRADING REQUIREMENTS
Overall approachWhat is supplied to the market? In Stage 1 thereasons why market improvements might be neededwere broadly identified. This stage involves estimatingthe levels of supply that could pass through new orimproved markets. For existing markets the assessmentcan be based mainly on observing what is happening inthe market. Where there is no existing market theassessment must be based on local supply and demandestimates and forecasts.
Supplies to a market and the type of market usedvary depending on the type of local agriculture. Forexample, in areas where there is large-scale productionof fruits and vegetables for urban areas, a new orimproved assembly market may be required. In areaswhere production is primarily of export commodities,which usually have well-established independentmarketing channels, only rural retail markets may berequired.
Catchment areas. One of the most difficult points toconsider is the “catchment area” to be served by a18
Stage 2 involves the review of data necessary
for market design. Existing agricultural
production statistics can be used together with
surveys to estimate supply and demand. The
following activities should be carried out:
Collection of information on local crop and
livestock production, on the functioning of
the various marketing channels and on
general trade conditions in the market’s
catchment area.
For new, larger markets and assembly
markets, an assessment of the supply and
demand conditions.
An estimate of the present quantities of
produce that are traded and a projection of
the future market throughput.
particular market. This could be reviewed by looking atthe production areas within walking or animal cartdistance of a market, in which case a maximum radiusof 10 km from the market might be a reasonableassumption. When an assembly market is beingplanned, and farmers have access to public transport orsmall trucks, a longer distance could be assumed. Ifthere are no other large rural centres with markets a“catchment area” for an existing or new assembly marketcould have a radius as high as 50 km.
Step 2.1Decide on design information needed
Secondary data. All rural planning depends on theavailability of information.The first approach to collectingthis information is to undertake a review of existingpublished documents and maps, such as regularpopulation and agricultural census reports. These
provide what is usually referred to as secondary data,examples of which are:
j population data (age composition, gender, migration,and mortality rates, annual growth rates);
j agricultural production data – areas and yields,location of agricultural production areas (irrigated andnon-irrigated), forested areas, fishing concessions;
j relevant studies on crop marketing, existing marketchannels, location of agroprocessing and storagefacilities; and
j available site engineering data and maps, strategicand physical planning standards and master plans,environmental data and building cost data.
Primary data. Primary data may also be needed. Thisinvolves working with communities, market traders andfarmers to collect data and, if necessary, undertakingfield surveys to fill gaps.
Market surveys. The types of survey that could beundertaken are as follows:
j inventory surveys that describe physical and tradingconditions in existing markets;
j traffic surveys to measure the number of vehiclesusing a market, the mode of transport used and theorigin and destination of agricultural produce;
j socio-economic and environmental impact studies ofspecific issues or areas; and 19
j case studies of small businesses, such as markettraders, to investigate their financial viability. This isparticularly important in order to evaluate theircapacity to pay increased fees, which may benecessary after making improvements or building anew market.
The market inventory survey (detailed in Annex A)usually consists of two parts: a general review of marketoperations and a physical survey, which involvesmapping the site and its facilities.
For more complex markets (such as an assemblymarket) this data should be supplemented by a trafficand origin/destination survey. Where there is a total lackof information on production, a sample survey of farmhouseholds may be necessary, although this level ofinvestigation is probably not appropriate for most ruralmarkets. A count of the existing sellers and observationof the market users’ activities, together with discussionswith traders, should be adequate for most markets.
20
It is essential to review production of both crops and livestock in the area to be served by the market.
FAO
/109
95/J
.Van
Ack
erFA
O/1
6188
/G.B
izza
rri
Step 2.2Assess supply and demand
It may be necessary to make an assessment of potentialsupply and demand to determine the existing or likelyflows through new markets. The methods for doing thisare shown in Annex B and the steps involved are asfollows:
j review crop and livestock production, to identify thequantities that could be marketed;
j review the role of market channels, to find out wherethe produce is presently going;
j review existing consumption, on the basis of averagefood consumption levels;
j determine on-farm use, to identify what is retained bythe farmers for their own use; and
j determine non-market sales, to quantify how muchproduce is not likely to go through the market.
Step 2.3Estimate the market’s throughput
Existing throughput. The last step at this stage is toestimate the planned market’s throughput. The basiccalculation method, which is the same for both primaryand assembly markets, is shown in Form 6 in Annex B.Using this method for each of the main crops it ispossible to estimate the following on an annual basis:
j marketable surplus;j total non-market sales;j planned or existing market sales;j imports into the area to meet any deficit; andj total market throughput.
Future market throughput. In calculating future marketthroughput additional factors need to be considered.Thefuture throughput of produce marketed at an assemblymarket is dependent on how local production increasesand what proportion of this increased growth will passthrough the market. For a primary retail market the futurethroughput will depend on local retail demand, which willbe affected by local population and income growth. Theeasiest way to handle this calculation is to assume thatthe competition from other marketing channels remains 21
22
Table 2Calculation of future market throughput(tonnes per year)
Fresh Present Retail trade Assembly trade Total produce through- Through- Growth Future Through- Growth Future future
put put factor put factor
a b c d e f g h(60% of a) (b × c) (40% of a) (e × f) (d + g)
Vegetables 2 000 1 200 1.40 1 680 800 1.40 1 120 2 800
Potatoes 2 500 1 500 1.40 2 100 1 000 1.60 1 600 3 700
Fruits 2 000 1 200 1.40 1 680 800 1.50 1 200 2 880
Meat 800 800 1.40 1 120 - - - 1 120
Eggs 500 500 1.40 700 - - - 700
Fish 200 200 1.40 280 - - - 280
Total 8 000 5 400 7 560 2 600 3 920 11 480
a constant proportion, to divide the market throughputinto retail and assembly trade and then to apply growthfactors for:
j retail trade, based on population growth andchanges in consumption (remember that censusdata is often out of date and this may be significantwhen growth rates are very rapid); and
j assembly trade, based on expected productiongrowth for different crops.
To make projections it is necessary to assume a timeperiod. In financial and economic analysis this is usuallytaken at 20 to 25 years, based on the life of theinvestment. However, such long-term projections aredifficult to justify and would give an exaggeratedimpression of demand for space. For rural markets a10-year projection period is more appropriate. Forexample, if the growth is 3.5 percent per year, for10 years it will be a growth factor of 1.03510, roughlyequivalent to a 40 percent increase or a multiplier of 1.4.
In many cases, of course, a market has a mixture offunctions. For example, retail trade might account for 60percent of the total and the balance might be assemblytrade. This assumption is made in the example shown inTable 2.
Given the uncertainty of making such estimates it isusually necessary to make two projections – high and
low – of future throughput, which reflect optimistic andpessimistic views of likely growth scenarios. The basisfor the growth factors should be discussed with localagricultural officers to ensure that they are consistentwith current information and policies.
As was suggested earlier, for simple improvements toan existing primary market such detailed calculationscan be omitted. By counting the number of stalls (n) andmultiplying this by the average daily sales per trader (s)and the number of marketing days (d) in a year, a roughestimate of the annual total (T) throughput can bederived. T = n × s × d. This can be projected into thefuture using a simple growth factor (as in Table 2).
Note: More detail on methods that can be used toproject demand is given in the FAO Agricultural ServicesBulletins Nos. 90, 121 and 141 (see Further Reading atthe end of the guide).
23