martor cutters and speciality knives 2016...14 15 no. 79 0.50 mm, 109.5 mm long no. 179 0.50 mm,...

CUTTERS AND SPECIALITY KNIVES2016/2017

WELCOME TO THE WORLD OF CUTTERS AND SPECIALITY KNIVES.

INTRODUCTIONA master of its craft.

Cutters and speciality knives from MARTOR.

ARGENTAX (CUTTERS) ARGENTAX TAP-O-MATICARGENTAX CUTTEX 9 MMARGENTAX CUTTEX 18 MMARGENTAX JUMBOARGENTAX REGELBARARGENTAX MULTIPOSARGENTAX GRIFFYARGENTAX SPEZIALARGENTAX ROBUSTARGENTAX TEKLIARGENTAX FILIUSARGENTAX CLEVERCUTARGENTAX TIREXARGENTAX CLAPARGENTAX TEXIARGENTAX KEY-SHAPED CUTTERARGENTAX MITRE CUTTERARGENTAX RAPID

GRAFIX (GRAPHIC CUTTERS) GRAFIX BOYGRAFIX PICCOLOGRAFIX 501GRAFIX 502GRAFIX 503GRAFIX SCALPELL SMALLGRAFIX SCALPELL LARGEGRAFIX SCALPELL PLASTICGRAFIX CLAPPEX SMALLGRAFIX CLAPPEX LARGEGRAFIX TIPCUTGRAFIX ROLLEX

SCRAPEX (SCRAPERS)SCRAPEX ARGENTAXSCRAPEX 596SCRAPEX 5196SCRAPEX CLEANYSCRAPEX MARTELLSCRAPEX INOX

Page2

Page6

1012141618222426313234353637383941

Page444748505152545658596061

Page646667687071

The products in this catalogue are generally shown in original size. The few exceptions are indicated on the product page.

TRIMMEX (DEBURRING CUTTERS)TRIMMEX CURVEXTRIMMEX RONDEXTRIMMEX FORTEXTRIMMEX 583TRIMMEX KANTEXTRIMMEX SICUREXTRIMMEX SUPERTRIMTRIMMEX CUTTOGRAFTRIMMEX SWIVELTRIMMEX PELLEXTRIMMEX GRATEXTRIMMEX SIMPLASTOTRIMMEX SIMPELTRIMMEX CERACUT

ACCESSORIESBELT HOLSTER L, M, SHOLSTER LARGEHOLSTER SMALLSAFEBOXUSED BLADE CONTAINERWALL MOUNT BRACKET USED BLADE CONTAINER

APPENDIXOur additional service mediaOur home pagePictogram legendImprint

Page7476777879808184878889909294

Page98

100100101101101

Page102103104106

2

A MASTER OF ITS CRAFT.CUTTERS AND SPECIALITY KNIVES FROM MARTOR.

FOR SPECIAL TASKS YOU NEEDSPECIAL SOLUTIONS.

Quality made in Solingen.MARTOR KG from Solingen in Germany is the leading international manufacturer of high-quality cutting solutions. Our GS-certified safety knives have been setting benchmarks for decades, and we always aim for the same high standards of quality in developing the range of speciality knives presented in this catalogue.

Meeting your needs.Our speciality knives give you highly developed cutting tools for a broad range of trades and applications. For cutting out, cutting off and cutting up as well as for handicrafts, designing, scraping or deburring – you will always get the result you need.

MARTOR-DNA in every tool.Our speciality knives, like our safety knives, are a culmination of more than 70 years of experi-ence in knives and blades where no comprise is made on sharpness, reliability and durability, and where only the best plastic and metal ma-terials are used. Furthermore, we know exactly the procedures and principles by which our customers work and are therefore able to pro-vide cutting tools that are, so to speak, tailor-made for the task. This is what makes MARTOR products different.

Good advice.Our system of names is just one way of finding what you need. But our mission is to provide you with the MARTOR product that specifically matches your cutting requirements. This is the difference between having a sharp knife and having a knife that is optimal for your cutting needs. Therefore, don‘t hesitate in contacting us. We can personally advise you on the pro-duct for your needs – by telephone, email or we‘ll arrange to visit you.

More than 50 speciality knives in a multitude of versions.Manual cutting tasks are required in virtually every work and home situation. To meet your needs, MARTOR has more than 50 different speciality knives, with a large range of blades for different uses as well as practical accesso-ries such as the new belt holster.

One name for each product family.To help you find what you need, each product family has its own „first name“. For example, if you come across a product beginning with ARGENTAX, you will know that it belongs to the family of standard cutters for universal applica-tions. The GRAFIX family covers all scalpel-type cutting tools. MARTOR‘s professional scrapers begin with the name SCRAPEX, and deburrers with TRIMMEX.

AR

GEN

TAX

CUTT

ERS

GR

AFI

XG

RA

PH

IC C

UTT

ERS

TRIM

MEX

D

EBU

RR

ING

CU

TTER

S

ACC

ESSO

RIE

SB

ELT

HO

LSTE

RS

SCR

AP

EXSC

RA

PER

S

Our ARGENTAX family contains all of the cutting

tools that you know as cutters: universal knives

for the most varied of cutting applications and

materials with a handle made of plastic, alumin-

ium or zinc. In addition to this we have a wide

range of snap-off and non-segmented blades.

You can almost always regulate the cutting depth

and the blade retraction manually.

AR

GEN

TAX

6 7

ARGENTAX TAP-O-MATICNO. 331

A robust toolIn the ARGENTAX TAP-O-MATIC, the handle and metal rail to guide the blade form a very stable unit. You can really feel it when you take it in your hand. And all the more when you start cutting.

Large selectionAmong 17 possible cutting depths, there must be a suitable one for you. The not segmented polystyrene blade, is particularly suita-ble for work with a maxi-mum blade extension.

Running to a narrow pointThe handle of the ARGENTAX TAP-O-MATIC tapers off to the front. So you can approach the cut in more narrow areas too.

The handle? HandyThe ARGENTAX TAP-O-MATIC fits exactly into your hand. What‘s more: the grooves on the back increase the gripping capacity. So there is no risk of your hand slipping while cutting.

Practical eyeletYou don‘t have to do without the eyelet in the ARGENTAX TAP-O-MATIC. You can just pull a strap through it and attach the cutter wherever you need it.

NO. 79 0.50 mm, 109.5 mm long

PRODUCT FEATURES

Technical features

Optional blade

Installed blade

Main cutting materials

Application

Tough when using. Flexible to handle.A cutter for high demands? The ARGENTAX TAP-O-MATIC with an 18 mm wide polystyrene blade fulfils this wish. The blade is not just suit-able for particularly deep cuts. The blade lock is also so robust that it can resist cutting pressure of up to 18 kg. And you can also adjust the blade extension to 17 different levels.

NO. 179 0.50 mm, 109.5 mm long, stainless

NO. 7940 0.50 mm, 71.2 mm long

NO. 17940 0,50 mm, 71.2 mm long, stainless

NO. 77 0.50 mm, 109.5 mm long

8 9

PRODUCT FEATURES

Technical features

Application

Break off the blade. Not your work.The ARGENTAX TAP-O-MATIC with an 18 mm wide snap-off blade is suitable for all normal cutting jobs. You can adjust the blade extension to 17 different levels using the blade lock. And what if the blade gets blunt? Break it off once and you can continue working.

Optional blade

Installed blade



PRODUCT DETAILS PRODUCT DETAILS

NO. 7940 0.50 mm

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Tough when using. Flexible to handle. With a shorter polystyrene blade.A cutter for high demands? The ARGENTAX TAP-O-MATIC with an 18 mm wide polystyrene blade fulfils this wish. The blade is not just suitable for deep cuts. The blade lock is also so robust that it can resist cutting pres-sure of up to 18 kg. And you can also adjust the blade extension to sever-al different levels.


NO. 79 0.50 mm, 109.5 mm longNO. 179 0.50 mm, 109.5 mm longstainless

NO. 7940 0.50 mm, 71.2 mm longNO. 17940 0.50 mm, 71.2 mm long stainless

NO. 77 0.50 mm, 109.5 mm long


NO. 79 0.50 mm, 109.5 mm longNO. 179 0.50 mm, 109.5 mm long, stainless

NO. 77 0.50 mm, 109.5 mm long

NO. 7940 0.50 mm, 71.2 mm long

10 11

PRODUCT FEATURES

Technical features

Application

Classic cutter. With a 9 mm polystyrene blade.Sharp, small, handy - the ARGENTAX CUTTEX 9 MM with a narrow polysty-rene blade has all the possible properties you would expect from a cutter. Ideal for easy cutting of cardboard boxes, cardboard, paper and adhesive tape. You can grip the long, rounded off handle comfortably and vary the blade extension as you wish. And what if the bendable blade gets blunt? Change is without problems.

Optional blade

Installed blade


ARGENTAX CUTTEX 9 MMNO. 46102

PRODUCT DETAILS PRODUCT DETAILS PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Classic cutter. With a 9 mm snap-off blade.Sharp, small, handy - the ARGENTAX CUTTEX 9 MM with a narrow snap-off blade includes all the properties you would expect from a cutter. Ideal for easy cutting of cardboard boxes, cardboard, paper and adhesive tape. The long, rounded off handle fits very well in your hand while doing so. You can vary the blade extension as you wish. But, be careful: it‘s better not to extend the blade out completely when you are cutting.


NO. 86 0.40 mm, 94.8 mm long

NO. 76 0.40 mm, 94.5 mm longNO. 776 0.40 mm, 55 mm long

NO. 76 0.40 mm, 94.5 mm long

NO. 86 0.40 mm 94.8 mm long

12 13

PRODUCT FEATURES

Technical features

Application

Classic cutter. With an 18 mm polystyrene blade.If you are looking for a mature cutter with a variable blade extension, the ARGENTAX CUTTEX 18 MM with a wide polystyrene blade is a very good choice. Just like its narrow „brother“, the ARGENTAX CUTTEX 9 MM, it fits very well into your hand. But it is not just useful for cutting cardboard boxes, cardboard and paper, but also adhesive and other types of tape. You can easily change the bendable blade.

Optional blade

Installed blade




NO. 77 0.50 mm, 109.5 mm long

NO. 79 0.50 mm, 109.5 mm longNO. 17940 0.50 mm, 109.5 mm long, stainless

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Classic cutter. With an 18 mm snap-off blade.If you are looking for a mature cutter with a variable blade extension, the ARGENTAX CUTTEX 18 MM with a wide snap-off blade is a very good choice. Just like its narrow „brother,“ the ARGENTAX CUTTEX 9 MM, it fits very well into your hand. But it is not just useful for cutting cardboard boxes, cardboard or paper, but also adhesive and other types of tape. But be careful: it‘s better not to use a completely extended blade!


NO. 79 0.50 mm, 109.5 mm long

NO. 77 0.50 mm, 109.5 mm long


90% of original size 90% of original size

14 15

NO. 79 0.50 mm, 109.5 mm long


NO. 77 0.50 mm, 109.5 mm long

PRODUCT FEATURES

Technical features

Application

A unique mass. With a polystyrene blade.The name „ARGENTAX JUMBO“ arouses certain associations and there is no doubt that they fit this cutter. Its strong appearance goes hand in hand with a distinguished cutting performance. With its 0.50 mm strong and 18 mm wide polystyrene blade, you are very well equipped for all the usual cutting jobs. You can fix the blade extension as you wish using the locking screw between 4 and 80 mm.

Optional blade

Installed blade


ARGENTAX JUMBONO. 67179


NO. 77 0.50 mm, 109.5 mm long

NO. 79 0.50 mm, 109.5 mm lang NO. 179 0.50 mm, 109.5 mm long, stainless

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

A unique mass. With a break-off blade.The name „ARGENTAX JUMBO“ arouses certain associations and there is no doubt that they fit this cutter. Its strong appearance goes hand in hand with a distinguished cutting performance. With its 0.50 mm strong and 18 mm wide break-off blade, you are very well equipped for all the usual cutting jobs. But be careful: never cut with a fully driven out blade.

ARGENTAX JUMBONO. 67177

16 17

NO. 65232 0.63 mm, deep-edged, rounded blade tips

NO. 56 0.63 mm

NO. 5634 0.63 mm, rounded blade tips

NO. 5232 0.63 mmm, deep-edged

PRODUCT FEATURES

Technical features

Application

Can do a lot and bear with a lot. With the trapezoid blade.The ARGENTAX REGELBAR made of aluminium has always had its faithful supporters. It‘s hardly surprising as this all rounder can do all the usual cut-ting tasks. You can fix the extension of the trapezoid blade using the slider at different levels. So you adjust your cutting tool again each time after you use it. There are also no less than four spare blades in the handle.

Installed blade


ARGENTAX REGELBARNO. 12552


NO. 56 0.63 mm

PRODUCT FEATURES

Technical featuresInstalled blade


Application

Can do a lot and bear with a lot. With a hooked blade.The ARGENTAX REGELBAR made of aluminium has always had its faith-ful supporters. It‘s hardly surprising as the hooked blade can cut various types of material such as threads, cloth and carpets. You can fix the blade extension at different levels using the slider. So you can always re-adjust your cutting tool after every use. There is also one spare hooked blade in the handle.

ARGENTAX REGELBARNO. 12256

Optional blade Optional blade

NO. 610 0.63 mm, stainlessNO. 5233 0.63 mm, 1-sided ground-edgeNO. 852 0.63 mm, stainless, TiNNO. 85233 0.63 mm, TiN

NO. 610 0.63 mm, stainlessNO. 5232 0.63 mm, deep-edgedNO. 5233 0.63 mm, 1-sided ground-edgeNO. 852 0.63 mm, stainless, TiN NO. 85233 0.63 mm, TiN



18 1918 19

Application

An energy package for any kind of job. With a trapezoid blade.There are a couple of substantial reasons that favour the ARGENTAX MULTIPOS - in the true sense of the word. The „heavy brother“ of the ARGENTAX REGELBAR is made completely out of zinc. A high degree of versatility goes hand in hand with its robustness. So you can work on all the usual cutting materials with the fitted trapezoid blade. The blade extension can also be adjusted to several levels. As an „emergen-cy reserve“ there are five spare blades in the handle.

PRODUCT FEATURES

Technical features



NO. 55 0.63 mm

NO. 57 0.63 mm, Tungsten-alloyed steel

NO. 56 0.63 mm


NO. 51 0.63 mm

Installed blade

NO. 53 0.63 mm, Tungsten-alloyed steel

NO. 610 0.63 mm, stainlessNO. 5232 0.63 mm, deep-edgedNO. 5233 0.63 mm, 1-sided ground-edge

Optional blade

ARGENTAX MULTIPOSNO. 09651

Stable DesignThe handle of the ARGENTAX MULTIPOS is made of two metal halves that are held together by a powerful screw. So you get more out of your cutting tool for longer.

Made of full metalIn spite of the massive design, the ARGENTAX MULTIPOS is not suitable for forceful cuts. Instead, you can use the unpainted variant in areas where metal detectable cutters are required.

For right and left handersAs you can see, the slider is on top of the handle, and can therefore be operated in the same way for the left and the right thumb. The ergonomically shaped handle also fits into any hand.

2-cutting edge bladeBefore changing the quality blade, you can turn it over once. That doubles the usa-ge time of the blade and reduces the energy you spend. Because your pro-duct cuts like new again.

It‘s all in the handle.There is an additional spare hook blade in the handle of the ARGENTAX MULTIPOS. So there is nothing in the way of a permanent cutting performance.

20 2121

NO. 55 0.63 mm

PRODUCT FEATURES

Technical features

Application

An energy package for any kind of job. With a hook blade.There are a couple of substantial reasons that favour the ARGENTAX MULTIPOS - in the true sense of the word. The „heavy brother“ of the ARGENTAX REGELBAR is made completely out of zinc. A high degree of versatility goes hand in hand with its robustness. So you can work on various cutting materials with the fitted hook blade. In addition, there is one spare blade in the handle.

Optional blade

Installed blade





PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

An energy package for any kind of job. With a roundet-tip hook blade.There are a couple of substantial reasons that favour the ARGENTAX MULTIPOS - in the true sense of the word. The „heavy brother“ of the ARGENTAX REGELBAR is made completely out of zinc. A high degree of versatility goes hand in hand with its robustness. So you can work on various cutting materials with the fitted hook blade. In addition, there is one spare blade in the handle.


NO. 57 0.63 mm, Tungsten- alloyed steel

NO. 56 0.63 mm


NO. 51 0.63 mmNO. 53 0.63 mm, Tungsten- alloyed steel



NO. 55 0.63 mm

NO. 57 0.63 mm, Tungsten- alloyed steel

NO. 56 0.63 mm

NO. 51 0.63 mmNO. 53 0.63 mm, Tungsten- alloyed steel



22 23

NO. 5232 0.63 mm

NO. 56 0.63 mm

PRODUCT FEATURES

Technical features

Application

Who wouldn‘t like to take hold here? With a trapezoid blade.The ARGENTAX GRIFFY is a cutting tool for uncompromising use. As soon as your thumb has found its place in the hollow of the handle, off you go. Fine cuts or forceful cuts, film, carpets or cloth - there are a variety of possibilities. You can fix the hooked blade in several extension lengths using the slider. Or you can retract it completely after your work is done. Four spare blades complete the package.

Installed blade


ARGENTAX GRIFFYNO. 64552


NO. 56 0.63 mm

PRODUCT FEATURES



Application

Customised for your hand. With a hooked blade.The ARGENTAX GRIFFY is a cutting tool for uncompromising use. As soon as your thumb has found its place in the hollow of the handle, off you go. Fine cuts or forceful cuts, film, carpets or cloth - there are a variety of possibilities. You can fix the hooked blade in several extension lengths using the slider. Or you can retract it completely after your work is done. In addition, there is one spare blade in the handle.

ARGENTAX GRIFFYNO. 64256

Optional blade


Optional blade

NO. 610 0.63 mm, stainlessNO. 5233 0.63 mm, 1-sided ground-edgeNO. 852 0.63 mm, stainless, TiN




24 2524

ARGENTAX SPEZIALNO. 11000

25

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

You decide what will become of it.A proven type of cutting tool that can be used in many ways? That would definitely apply to the ARGENTAX SPEZIAL which has been a part of our product range successfully for a long time. You will not only receive the ARGENTAX SPEZIAL without a fitted blade. Therefore, please con-tinue to help yourself from our large range of blades to fit your cutter depending on the use.

›› Note: There is no blade mounted. Help yourself from the wide range of optional blades.

Robust DesignThe ARGENTAX SPEZIAL is made of aluminium. Its advantage: maximum protection from abrasion in everything you do. More-over, the grooves at the front of the handle ensure a better grip.

Blades to choose fromWe supply the ARGENTAX SPEZIAL without a blade. Choose for yourself out of a large number of suitable alternatives. You can adapt yourself and your cutter flexibly to every new cut-ting job in this way.

For left and right handersYour cutting tool has been designed for right and left handers. You do not have to use a slider, since this is a fixed blade.

Practical eyeletYou do not have to do without an eyelet in the ARGENTAX SPEZIAL.You can just pull a strap through it and attach the cutting tool wherever you need it.

NO. 101 0,80 mm

NO. 102 0,80 mm

NO. 103 0,80 mmNO. 1103 0,80 mm, stainless

NO. 104 0,80 mm

NO. 1050,80 mm

NO. 1060,80 mm

NO. 107 0,80 mm

NO. 108 0,80 mm

NO. 112 0,80 mm

NO. 114 0,80 mm

NO. 1150,80 mm

NO. 111 0,80 mm

NO. 119 0,80 mm

26 27

PRODUCT DETAILSPRODUCT DETAILS

NO. 150 1.80 mm

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Bites through solid rubber, leather and templates.It‘s obvious why the ARGENTAX ROBUST has that name: you are dealing with an extremely stable all purpose cutter here, made of firm die-cast aluminium, which you can use in a variety of ways, depending on the blade that has been fitted. With this variant, you should preferably use your cutting tool for solid rubber, leather and templates. The manually retractable blade, at 1.80 mm is about three times as strong as a normal one. Any more questions?

ARGENTAX ROBUSTNO. 06150

PRODUCT FEATURES

Technical features

Application

Can deal with rubber, leather and linoleum any day.It‘s obvious why the ARGENTAX ROBUST has that name: you are dealing with an extremely stable all purpose cutter here, made of firm die-cast aluminium, which you can use in a variety of ways. With this variant you can use your cutting tool for all common cutting materials. The manually retractable blade, at 1.80 mm is about three times as strong as a normal one. Any more questions?

Optional blade

NO. 151 1.80 mm

Installed blade



NO. 151 1.80 mm

NO. 153 1.80 mm

NO. 155 1.80 mm

NO. 156 1.80 mm

NO. 157 1.80 mm

NO. 158 1.80 mm

NO. 160 1.80 mm

NO. 161 1.80 mm

NO. 150 1.80 mm

NO. 153 1.80 mm

NO. 155 1.80 mm

NO. 156 1.80 mm

NO. 157 1.80 mm

NO. 158 1.80 mm

NO. 160 1.80 mm

NO. 161 1.80 mm


28 29

PRODUCT DETAILS

NO. 155 1.80 mm

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Bursting with strength - especially when deburring.It‘s obvious why the ARGENTAX ROBUST has that name: you are dealing with an extremely stable all purpose cutter here, made of firm die-cast aluminium, which you can use in a variety of ways. With this variant you can use your cutting tool for all common cutting materials. The manually retractable blade, at 1.80 mm is about three times as strong as a normal one. Any more questions?

ARGENTAX ROBUSTNO 06155

NO. 156 1.80 mm

PRODUCT FEATURES

Technical features

Application

There‘s no cutting material that can stop it.It‘s obvious why the ARGENTAX ROBUST has that name: you are dealing with an extremely stable all purpose cutter here, made of firm die-cast aluminium, which you can use in a variety of ways. With this variant you can use your cutting tool for all common cutting materials. The manually retractable blade, at 1.80 mm is about three times as strong as a normal one. Any more questions?

Optional blade

Installed blade



PRODUCT DETAILS

NO. 150 1.80 mm

NO. 151 1.80 mm

NO. 153 1.80 mm

NO. 150 1.80 mm

NO. 151 1.80 mm

NO. 153 1.80 mm

NO. 156 1.80 mm

NO. 157 1.80 mm

NO. 158 1.80 mm

NO. 160 1.80 mm

NO. 161 1.80 mm

NO. 155 1.80 mm

NO. 157 1.80 mm

NO. 158 1.80 mm

NO. 160 1.80 mm

NO. 161 1.80 mm


30 31

PRODUCT DETAILS

NO. 158 1.80 mm

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

No concessions made for strong rubber parts.It‘s obvious why the ARGENTAX ROBUST has that name: you are dealing with an extremely stable all purpose cutter here, made of firm die-cast aluminium, which you can use in a variety of ways. With this variant you can use your cutting tool for all common cutting materials. The manually retractable blade, at 1.80 mm is about three times as strong as a normal one. Any more questions?


NO. 54045 0.45 mm

PRODUCT FEATURES

Technical features

Application

No Extras - Just Cut.No Extras - Just Cut. The „Tekli Plastik“ has now become the ARGENTAX TEKLI, but this has no influence on its cutting performance. It continues to be a good choice if you are looking for a light plastic cutter with an adjustable blade extension. You can use it for the most different cutting types and cutting materials and benefit from its pleasant handling while doing so.

Installed blade


ARGENTAX TEKLINO. 554

PRODUCT DETAILS

NO. 150 1.80 mm

NO. 151 1.80 mm

NO. 153 1.80 mm

NO. 155 1.80 mm

NO. 156 1.80 mm

NO. 157 1.80 mm

NO. 160 1.80 mm

NO. 161 1.80 mm

80% of original size

32 33

PRODUCT DETAILS

NO. 5232 0.63 mm

PRODUCT FEATURES



Application

Big in matters of versatility. With a trapezoid blade.The ARGENTAX FILIUS is a small cutter with manual blade retraction that can be used in a variety of ways. It has a preference for cardboard and film. You can push the blade outwards in three different cutting depths through the adjustable slider. Or back into the handle to hide it safely. You can choose between several blade variants, from stainless to rounded.

ARGENTAX FILIUSNO. 19152

NO. 56 0.63 mm

PRODUCT FEATURES

Technical features

Application

Big in matters of versatility. With a hooked blade.The ARGENTAX FILIUS is a small cutter with manual blade retraction that can be used in a variety of ways. Its hooked blade is best used to cut film, carpets and textiles. You can push the blade outwards in three different cutting depths using the adjustable slider. You can choose between sev-eral blade variants, from stainless to rounded.

Installed blade


ARGENTAX FILIUSNO. 19156

PRODUCT DETAILS


NO. 56 0.63 mm

NO. 54065 0.63 mm, carbon steelNO. 610 0.63 mm, stainlessNO. 5233 0.63 mm, 1-sided ground-edge


NO. 54065 0.63 mm, carbon steelNO. 610 0.63 mm, stainlessNO. 5232 0.63 mm, deep-edgedNO. 5233 0.63 mm, 1-sided ground-edge


NO. 56 0.63 mm


34 35

PRODUCT DETAILS

NO. 45 0.30 mm

NO. 145 0.30 mm, stainless

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Many meaningful details - in the narrowest space.The ARGENTAX CLEVERCUT is a box-cutter with manual blade retraction. You can extend the blade with a slider. It is available in the box to you un-til you move it back into the handle yourself. The cutting depth is so low, that the blade can hardly harm your goods.

ARGENTAX CLEVERCUTNO. 474

PRODUCT FEATURES

Technical features

Application

Its goal is your goal: to open cardboard boxes.You are looking for a handy box cutter with manual blade retraction? How about the ARGENTAX TIREX? It is light, handy - and extremely uncompli-cated. You can move the blade back into the handle by pulling the plastic insert to the back - until it locks in securely. To continue cutting, release the built-in lock by lightly pressing on the bar in the middle.


ARGENTAX TIREXNO. 463

Installed blade

›› The blade is moulded into the body of the cutter and cannot be changed. Blade thickness 0.45 mm.

PRODUCT DETAILS

36 37

Application

It fits. Even into the smallest pocket.MARTOR and pocket cutters? Why not! With the ARGENTAX CLAP you can actually fold the quality blade in and out. When the blade is open you can carry out many different easy cutting jobs with it. When you fold it back into the handle, you have placed your cutting tool in a safe condition.

Installed blade

ARGENTAX CLAPNO. 579


PRODUCT FEATURES

Technical features


PRODUCT DETAILS

Application

Hardly bigger than the blade itself.Even if it looks like it, the disposable cutter, the ARGENTAX TEXI is not meant for shaving. What you get, rather, is a small separating cutter you can use for very different purposes. Place your fingers on the blade hold-er when cutting! You can fold the blade back into the handle after use to „de-sharpen“ your cutting tool.

Installed blade

ARGENTAX TEXINO. 79000


PRODUCT FEATURES

Technical features


PRODUCT DETAILS

38 39

Application

Little helpers - for the very small jobs.This cutting tool makes a point with its unusual key shape. One can hardly imagine that a quality blade fits in here and can be released with a slider. But the word „impossible“ doesn‘t exist at MARTOR. It‘s best to use the snapp-off blade, adjustable at three levels. for easy cutting jobs. After the work is done, pull the blade back into the „key.“

Installed blade

ARGENTAX KEY-SHAPED CUTTERNO. 312


PRODUCT FEATURES

Technical features


PRODUCT DETAILS

2x NO. 42045 0.45 mm

PRODUCT FEATURES

Technical features

Application

Chamfer on insulation boards? No problem.Unusual name, unusual tool. You can prepare on insulation boards with a thickness of up to 15 mm with the ARGENTAX MITRE CUTTER. Specifi-cally, you are cutting in a 45 degree mitre using the two slanted blades. You can then join the two boards to fit exactly. The handle, suited to your hand, makes work just as easy as the smooth bottom part does. In addi-tion, there are five spare blades in the handle.

Installed blade


ARGENTAX MITRE CUTTERNO. 57542

PRODUCT DETAILS

40 41

ARGENTAX RAPIDNO. 594

Two functionsEver had problems with a silicon cartridge? First of all, with the closed plug? And right after that, the spout opening, that is too nar-row? The ARGENTAX RAPID can provide first class cutting in both cases.

For left and right handersIt makes no difference whether you are left or right handed when using the ARGENTAX RAPID. You will always work with the same precision. Any hand can take care of the RAPID.

Practical eyeletYou won‘t have to do with-out it in this special cutting tool: the practical eyelet for attaching. So you can hang up the ARGENTAX RAPID safely, and always find it again.

Safe when you are on the goThe cutter has a protective cap to ensure that personal transporting is safe. It cov-ers the pointed blade. The sharp edges of the second blade are best stored in the handle.

PRODUCT FEATURES

Technical features


Application

Two blades, one goal: silicon.The ARGENTAX RAPID has found its purpose: silicon cartridges. It has two blades to deal with them. One small pointed one, that you can use to scratch and cut open the plug. And a rectangular one which caps the spout opening like a guillotine according to the thickness you require. Nothing can then come in the way of your actual work, such as renewing joints.

For those who like to be accurate to the millimetre:

with our GRAFIX tools you can cut reliably and

with the highest precision, whether you’re at work

or at home, a graphic designer or an architect, a

handicraft enthusiast or a model builder. The cut-

ting performance of our scalpels ranges from fine

paper through to thin cardboard and smooth films

on to fabrics and textiles.

GR

AFI

X

44 45

GRAFIX BOYNO. 31172

Made of aluminiumThe heading already says everything. The GRAFIX BOY is an extremely ro-bust cutting tool. Whether as a handyman, artist or graphic designer - you will definitely count the scalpel as one of your assistants for a long time.

Easy blade changingChanging blades is so easy, that you only need to re-member the following: turn open the knurled nut and release the blade holder. Take out the blade, put in the new one, done.

Light and handyGRAFIX BOY convinces you with its light and handy appearance. The pen-type handle ends in a knurled nut which prevents your fingers from slipping.

Many bladesMARTOR is known for its wide range of blades, which you can benefit from here too. Choose between various blades in different strengths and get the suit-able tool for every job.

NO. 72 0.50 mm

NO. 33 0.50 mm

NO. 33 0.50 mm

NO. 33 0.50 mm

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

If you are particular about details. With a prominent tip.GRAFIX BOY is something of a „fine fellow“ among scalpels. That‘s because it is suitable for particularly precise and delicate cutting work. Or for careful erasing. You hold the cutting tool made of aluminium in your hand as you would hold a writing instrument. It is also very uncom-plicated to handle, for example, blade changing.

46 47

NO. 33 0.50 mm

PRODUCT FEATURES

Technical features

Application

If you are particular about details. With a rounded off tip.GRAFIX BOY is something of a „fine fellow“ among scalpels. That‘s be-cause it is suitable for particularly precise and delicate cutting work. Or for careful erasing. You hold the cutting tool made of aluminium in your hand as you would hold a writing instrument. It is also very uncomplicated to handle, for example, blade changing.

Optional blade

Installed blade


GRAFIX BOYNO. 31133

PRODUCT DETAILS

NO. 43 0.40 mm

PRODUCT DETAILS PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Cut, deburr - and convince!Whether in the office or in your free time, whether for graphic designers, handymen or model builders, the GRAFIX PICCOLO provides valuable ser-vices everywhere. You can use this aluminium tool just as well for cutting and deburring. The handy grip and the available blades are retractable. For your safety.

GRAFIX PICCOLONO. 32132

NO. 72 0.50 mm

NO. 73 0.50 mm


NO. 746 0.63 mm, 36° angle

NO. 784 0.63 mmNO. 8784 0.63 mm, TiN

NO. 32 0.63 mm, 45° angle

48 49

PRODUCT FEATURES

Technical features

Application

The artist among scalpels.Are you from an industry where the details matter? The GRAFIX 501 is made for all fine cutting work - as well as for erasing. Advertising agen-cies and technical offices therefore reach out for the GRAFIX 501. It‘s also because the exceptionally large variety of blades will encourage your creativity.

NO. 680 0.50 mm

Installed blade


GRAFIX 501NO. 501


Technical features

NO. 673 2.50 mm

Installed blade


Application

The artist among scalpels. With a cutting needle.The GRAFIX 501 with a fitted cutting needle is made for all fine cutting work, e.g. for film and paper sheets. Or you can use it for precise scratch-ing. With these skills, the GRAFIX 501 is recommended for advertising agencies and technical offices. Even if you depend on the highest degree of precision in model construction, the cutting needle is a valuable aid.

GRAFIX 501NO. 810

Optional blade


NO. 677 0.50 mm

NO. 6790.50 mm

NO. 680 0.50 mm

NO. 681 0.50 mm

Optional blade

NO. 34 0.50 mmNO. 834 0.50 mm, TiN

NO. 629 0.50 mmNO. 8629 0.50 mm, TiN

NO. 605 0.50 mmNO. 8605 0.50 mm, TiN

NO. 606 0.50 mmNO. 8606 0.50 mm, TiN

NO. 673 2,50 mm


NO. 677 0.50 mm

NO. 679 0.50 mm

NO. 681 0.50 mm

NO. 34 0.50 mmNO. 834 0.50 mm, TiN

NO. 629 0.50 mmNO. 8629 0.50 mm, TiN

NO. 605 0.50 mmNO. 8605 0.50 mm, TiN

NO. 606 0.50 mmNO. 8606 0.50 mm, TiN

50 51

NO. 626 0.63 mm

NO. 628 0.63 mm

NO. 615 0.50 mm

NO. 618 0.63 mm

NO. 624 0.63 mm

PRODUCT FEATURES

Technical features

Application

Even the name is clear cut.The former „big boy“ now responds to a new name. But even as GRAFIX 503 it remains the exact scalpel you know and value. So you can use it to cut and deburr during model construction, for example. It is also suitable for cutting film, paper or textiles accurately. It lies very comfortably like a high quality writing tool in you hand.

NO. 28 0.63 mm

Installed blade


GRAFIX 503NO. 30128

PRODUCT DETAILSPRODUCT DETAILS PRODUCT FEATURES

Technical features

NO. 623 0.65 mm

Installed blade


Application

Cutting, deburring? You can start afresh with this tool.In future the „old boy“ will start out under the new name GRAFIX 502. The timeless cutter is a big help if you want to cut and deburr - for example when constructing models. The rounded handle shaped like a pen is very easy to guide. The GRAFIX 502 is also made of aluminium, which means a long service life.

GRAFIX 502NO. 502


NO. 30 0.63 mm

NO. 31 0.63 mm

NO. 27 0.63 mm, 2-sided ground-edge

NO. 2733 0.63 mm, 1-sided ground-edge

NO. 29 0,65 mm

52 53

PRODUCT FEATURES

Technical features

Application

The kind of scalpel one wishes for. With a prominent point.A picture book scalpel in form and function - or just one from the MARTOR range of products. You can work on graphic paper, film sheets and much more with the GRAFIX SCALPELL SMALL. Since it is made out of chrome plated steel, you can easily place more stress on it. In this variant we have fitted a small scalpel blade with a prominent point.

NO. 11 0.40 mm

Installed blade


GRAFIX SCALPEL SMALLNO. 23111

PRODUCT DETAILS

NO. 12 0.40 mm

›› All blades on page 50

PRODUCT DETAILSPRODUCT FEATURES

Technical features Application

The kind of scalpel one wishes for. With a bent point.You can work on graphic paper, film sheets and much more with the GRAFIX SCALPELL SMALL. Since it is made out of chrome plated steel, you can easily place more stress on it. In this variant we have fitted a small scalpel blade with a point bent downwards.

Installed bladeMain cutting materials


NO. 13 0.40 mm

›› All blades fon page 50



The kind of scalpel one wishes for. With a rounded-off point.You can work on graphic paper, film sheets and much more with the GRAFIX SCALPELL SMALL. Since it is made out of chrome plated steel, you can easily place more stress on it. In this vari-ant we have fitted a small scalpel blade with a rounded-off cutting edge.



Optional blade



NO. 14 0.40 mm

NO. 15 0.40 mm

NO. 16 0.40 mm

NO. 1031 0.40 mm

NO. 10 0.40 mm

NO. 12 0.40 mm

NO. 13 0.40 mm

54 55


NO. 22 0.40 mm

NO. 23 0.40 mm

NO. 24 0.40 mm, larger than NO. 23NO. 25 0.40 mm

NO. 36 0.40 mm

PRODUCT FEATURES

Technical features

Application

Shining introduction as a precision tool. With an extra long point.A picture book scalpel in form and function - or just one from the MARTOR range of products. You can work on graphic paper, film sheets and much more with the GRAFIX SCALPELL LARGE. Since it is made out of chrome plated steel, you can easily place more stress on it. In this variant, we have fitted a large scalpel blade with an extra long, rounded off cutting edge.

NO. 21 0.40 mm

Installed blade


GRAFIX SCALPEL LARGENO. 21121

PRODUCT DETAILS

NO. 24 0.40 mm




Shining introduction as a precision tool. With a rounded off cutting edge.You can work on graphic paper, film sheets and much more with the GRAFIX SCALPELL GROSS. Since it is made out of chrome plated steel, you can easily place more stress on it. In this vari-ant, we have fitted a large scalpel blade with a rounded-off cutting edge.



NO. 25 0.40 mm




Shining introduction as a precision tool. With a prominent point.You can work on graphic paper, film sheets and much more with the GRAFIX SCALPELL LARGE. Since it is made out of chrome plated steel, you can easily place more stress on it. In this vari-ant, we have fitted a large scalpel blade with a prominent point.



Optional blade



NO. 1025 0,40 mmNO. 125 0,40 mm, stainless

NO. 18 0,40 mm, stainless

NO. 19 0,40 mm

56 57


NO. 22 0.40 mm

NO. 23 0.40 mm

NO. 24 0.40 mm, larger than NO. 23NO. 25 0.40 mm

NO. 36 0.40 mm

NO. 1025 0.40 mmNO. 125 0.40 mm, stainless


NO. 19 0.40 mm

PRODUCT FEATURES

Technical features

Application

Go ahead and be quite precise. With extra-long blade.The GRAFIX SCALPEL PLASTIC belongs to our family of classic scalpels. In it, you will find an established tool whenever you have to precisely cut paper, film or textiles. It has its followers among graphic designers as well as model builders. In this variant you work with a large scalpel blade which, with its rounded off point is especially suitable for lighter loads.

NO. 21 0.40 mm

Installed blade


GRAFIX SCALPEL PLASTICNO. 20121

PRODUCT DETAILS

NO. 24 0.40 mm




Go ahead and be quite precise. With a rounded off tip.The GRAFIX SCALPELL PLASTIC belongs to our family of classic scalpels. In this variant you work with a large scalpel blade which, with its rounded off point is especially suitable for lighter loads.



NO. 25 0.40 mm




Go ahead and be quite precise. With a prominent tip. The GRAFIX SCALPELL PLASTIC belongs to our family of classic scalpels. In this variant, you will work with a large scalpel blade, which is especially suitable for lighter loads with its prominent tip.



Optional blade



58 59

PRODUCT FEATURES

Technical features

Application

Precision you can fold out.The GRAFIX CLAPPEX SMALL is a very good choice for anyone who likes to work with fine scalpel blades. It is ideal for cutting graphic paper or working on film. Its highlight is the foldable blade holder made of forged steel that disappears into a plastic handle. Apart from the mounted blade, you can expect a large number of optional blades - the right one for every use.

NO. 11 0.40 mm

Installed blade


GRAFIX CLAPPEX SMALLNO. 20500


Technical features

NO. 24 0.40 mm

Installed blade


Application

A high performer that you can fold out.If you like working with massive scalpel blades, the GRAFIX CLAPPEX LARGE will serve you very well. Whereas its handle is made of plastic, the blade holder that can be folded out is made of forged steel. But the large selection of optional blades could also meet your requirements. Whether you want to cut graphic paper or film - this cutter is definitely a good find for you.

GRAFIX CLAPPEX LARGENO. 20600


NO. 14 0.40 mm

NO. 15 0.40 mm

NO. 16 0.40 mm

NO. 1031 0.40 mm

NO. 10 0.40 mm

NO. 12 0.40 mm

NO. 13 0.40 mm

NO. 22 0.40 mm

NO. 23 0.40 mm

NO. 25 0.40 mm

NO. 36 0.40 mm


NO. 1025 0.40 mm

NO. 18 0.40 mm, stainless steelNO. 19 0.40 mm

NO. 20 0.40 mm, stainless steelNO. 21 0.40 mm

60 61

Application

Cutting instead of writing. Your „Pen“ with a blade.Even something like this is available at MARTOR: Just as in the case of a ball-point pen, you press the pusher at the top – and the blade comes out at the bottom. Since the GRAFIX TIPCUT can be guided just as accurately as a pen, it is suitable for all delicate and sophisticated cutting work. For example, for cutting through paper, foil or textiles. Similarly, you can sink the blade back into the handle by pressing the pusher. It cannot get easier than this.

Installed blade

GRAFIX TIPCUTNO. 490

PRODUCT FEATURES

Technical features


PRODUCT DETAILS

Application

Rolls almost automatically. Through paper, film, etc.A rotary blade you release with a lever? That‘s not a very frequent com-bination at MARTOR either. Use the GRAFIX ROLLEX to cut paper, film and leather - the best way is on a suitable cutting surface. It is also suitable for felt and cloth without curling up.

Installed blade

GRAFIX ROLLEXNO. 509

PRODUCT FEATURES

Technical features


PRODUCT DETAILS

NO. 725 0.60 mm

NO. 676 0.50 mm

Labels and stickers, paint and varnish residue,

glues and mortar all get where they don‘t belong,

for example on the floor, the wall or a work sur-

face. This is no problem when you go to work on

them with a professional scraper. With SCRAPEX

tools by MARTOR you can clean all smooth sur-

faces carefully without leaving a trace.

SCR

AP

EX

64 65

SCRAPEX ARGENTAXNO. 46144

Especially ergonomicErgonomics is not the exception with us, but the rule. Even a scraper like the SCRAPEX ARGENTAX waits for you with a rounded handle, which you would gladly also hold for longer in you hand.

Large blade extensionThere is comparatively a lot of blade available for a scraper. The advantage: You can reach between the surface and remains of the glue much more easily and can then remove it much more easily too.

Flexible to useThe SCRAPEX ARGENTAX is very suitable for flat scraping angles. So you can depend on your scraper even in difficult situations.

For right and leftThe SCRAPEX ARGENTAX fits into every hand. No matter whether it‘s your right or your left hand. Because the handle has been shaped in such a bal-anced way, that no type of handling is preferred or neglected.

Easy blade changingAnd that completely with-out a tool: you just have to push the blade to the side and take it out.

NO. 44 0.30 mm


NO. 60044 0.30 mm

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Top forming, top form.It really feels good, the large, rounded handle of the SCRAPEX ARGENTAX. But even the perfor-mance of this classic scraper convinces. So you can free all smooth surfaces from residue and remains with it - no matter whether at work or at home. When you‘re done, push the protective cap over the blade, and everything is safe.


66 67

NO. 96 0.40 mm


PRODUCT FEATURES

Technical features

Application

Nothing stays behind except satisfaction.The SCRAPEX 596 is the largest scraper in our product range together with the even longer SCRAPEX 5196. Use it for effortless removal of stickers, labels and other paper, colour and paint residue on all smooth surfaces. You can work especially effectively with the 100 mm long blade. Your professional tool also convinces with a non-slip handle and the built-in safeguard.

Optional blade

Installed blade


SCRAPEX 596NO. 596


NO. 96 0.40 mm


PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Nothing stays behind except satisfaction. With an extra long handle.With its 22 cm long handle and a weight of more than 300 g, the SCRAPEX 5196 is the most powerful scraper in our product range. Use it for effortless removal of stickers, labels and other paper, colour and paint residue on all smooth surfaces. You can work particularly effectively with the 100 mm long blade. Your professional tool will also convince you with a non-slip handle and the built-in safeguard.

SCRAPEX 5196NO. 5196


68 69

SCRAPEX CLEANYNO. 544

Good handlingThe end of the handle is rounded so that it doesn‘t press into your hand. The grooves on the slide and in the front handle area also make your work easier. And the integrated blade magazine is comfortable too.

Transport safelyYou don‘t just release the blade with the slide but also pull it back into the handle. It remains tight and safe there - so that you can transport your cutting tool without any problems.

Easy blade changingChanging blades is possible without tools. You press the slider as far as possi-ble to the front with your hand and release the blade in this way. Now you can push it out to the side.

Practical eyeletYou do not have to do without the eyelet with the SCRAPEX CLEANY. You can just pull a strap through it and hang up the scraper wherever you need it.

For right and leftThe SCRAPEX CLEANY fits into every hand, no mat-ter whether it‘s your right or left hand. Because the handle has been shaped in such a balanced way that no type of handling is preferred or neglected.

NO. 44 0.30 mm


NO. 60044 0.30 mm

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

What it does? Clean work.Labels on the floor? Remains of materials tightly stuck? You can easily clean all smooth surfaces with the SCRAPEX CLEANY. The handy scraper is made of plastic. You can push its blade out of the handle with the practical slider, and af-ter use, push it back in again to store it safely. Blade changing is also as easy as pie.

70 71

NO. 37020 0.20 mm

PRODUCT FEATURES

Technical features

Application

And everything goes smoothly.A very normal scraper at first glance. When looking at it a second time, it is a tool that clearly offers more. The SCRAPEX MARTELL will assist you perfectly when removing labels and when cleaning glass-ceramic cooking areas. After the work is done, you can shield the blade safely by pushing the blade cover to the front. Just a bit further forwards and the blade is ready for changing.

Installed blade


SCRAPEX MARTELLNO. 47137


NO. 37020 0.20 mm


PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Protection from rust. Protection for you.The name itself, SCRAPEX INOX, carries one of its most important prop-erties. The classic scraper is made of stainless steel, which is beneficial when used in the kitchen to clean glass-ceramic stove tops, or to clean other smooth surfaces. Another advantage: you can safely cover the blade by pushing the upper half of the handle right to the front.

SCRAPEX INOXNO. 592


Optional blade

The final touch for your tool? Use our high quality

deburring tools. You can use the TRIMMEX family

by MARTOR to deburr soft and hard materials,

on internal and external edges, on curved and

straight surfaces. Our wide selection of matching

handles and blades work to create a clean result.

TRIM

MEX

74 75

TRIMMEX CURVEXNO. 510

Robust DesignYou can rely on our quality. The stable handle ends in a knurled nut. Its purpose is to lock in position the extendable rod shaped blade holder.

Ergonomic handleThe handle of the TRIMMEX CURVEX thickens towards the middle. So it fits particularly well in your palm when working. The grooves on the knurled nut give your fingers and even better grip.

Easy blade changingIt‘s easy to change the blade. Turn the knurled nut open and take the holder out of the handle. Now pull the flexible area downwards and remove the blade.

Lengthened handleThe blade holder can be driven out up to a maxi-mum of 95 mm. You can therefore work on places that seem difficult to reach. The holder can also take up blades on both sides - with different diameters.

NO. 791 Ø 2.60 mm

NO. 795 Ø 2.60 mm

NO. 796 Ø 2.60 mm

NO. 797 Ø 3.20 mm

NO. 797 Ø 3.20 mm

NO. 797 Ø 3.20 mm

NO. 797 Ø 3.20 mm, extra-fine

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Burr after burr, all around.Nomen est omen - the name says it all. The TRIMMEX CURVEX is best used to deburr plastic and metal parts. The bent blade that can be rotated will especially benefit you in rounded off materials since it automatically takes on the best possible position. So you can clean your materials - also at points difficult to access.

76 77

NO. 624 0.63 mm

PRODUCT FEATURES

Technical features

Application

Well versed on unknown territory. With a pointed blade.The „learned“ deburring cutter TRIMMEX RONDEX can also be used for cutting work for hobbies and in the professional area - if you decide to get the variant shown here. The pointed blade can be used in many ways. You can fit the strong handle with the metal blade holder in dif-ferent ways too. With a special drawcut blade, for example, if you are just deburring.

Optional blade

Installed blade


TRIMMEX RONDEXNO. 505


NO. 604 0.80 mm

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Doesn‘t show any weaknesses. Not even with stronger burrs.You would like a stable deburring cutter? With an ergonomic handle and a meaningful selection of blades? The TRIMMEX FORTEX will fulfil this wish for you. And a few wishes too. Because your cutting tool can confront stronger burrs too. You are well served with this tool as far as the professional deburring of plastic parts is concerned.

TRIMMEX FORTEXNO. 507

NO. 618 0.63 mm

NO. 623 0.65 mm

NO. 626 0.63 mm

NO. 628 0.63 mm

NO. 697

NO. 699 NO. 601

0.80 mm

NO. 602 0.80 mm

NO. 6604 0.80 mm

78 79

NO. 8432 1.00 mm

PRODUCT FEATURES

Technical features

Application

And the burr is already surrounded.Why is the TRIMMEX 583 specialised in the deburring of plastic parts? Mainly because of the fitted deburring blade, which leads the protruding material directly to the cutting edge. It is also flattened at the bottom, which makes precise guiding of your professional tool even easier. The blade, only sharpened in a small area, can be changed without any effort worth mentioning.

Optional blade

Installed blade


TRIMMEX 583NO. 583


NO. 95 1.00 mm

PRODUCT FEATURES



Application

A specialist in glued edges.If you approach MARTOR with special wishes, you can expect special solu-tions. The TRIMMEX KANTEX is that type of special case. You can use it idealy to cut glued edges. Depending on the use, you can turn the blade through 90 degrees - and work, now with a pushing, now with a pulling movement in this way.

TRIMMEX KANTEXNO. 595

NO. 83 1.00 mm

NO. 84 1.00 mm

80 81

NO. 40 0.45 mm

PRODUCT FEATURES

Technical features

Application

Not everyone can do glass. This one can.MARTOR‘s motto applies here too: there is a solution for every cutting problem. The TRIMMEX SICUREX is a special tool for cutting laminated glass. The adjustable handle allows you to work without fatigue and pres-sure points don‘t even form on your hands. The transparent forked head has also been designed in such a way that you cannot scratch your sensi-tive glass surfaces with it.

Installed blade


TRIMMEX SICUREXNO. 40140

PRODUCT DETAILS

PRODUCT DETAILS

NO. 606 0.50 mm

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Grows with its tasks. With a rounded off blade.Deburring or cutting? Basically, you can do both with the TRIMMEX SU-PERTRIM. You have a 0.50 mm strong blade with a rounded off point at hand in this variant. Ideal for removing excess material and for cutting work with paper and cardboard. The TRIMMEX SUPERTRIM also scores high in terms of comfort. An example: you can adjust the handle length individually, depending on the hand size.

TRIMMEX SUPERTRIMNO. 87606

NO. 1031 0.40 mm

NO. 10 0.40 mm

NO. 11 0.40 mm

NO. 12 0.40 mm

NO. 13 0.40 mm

NO. 14 0.40 mm

NO. 15 0.40 mm

NO. 33 0.50 mm

NO. 34 0.50 mmNO. 834 0.50 mm, TiN

NO. 605 0.50 mmNO. 8605 0.50 mm, TiN

NO. 629 0.50 mmNO. 8629 0.50 mm, TiN

NO. 643 0.50 mm

NO. 677 0.50 mm

NO. 679 0.50 mm

NO. 680 0.50 mm

NO. 681 0.50 mm

NO. 8606 0.50 mm, TiN

NO. 43 0.40 mm

NO. 72 0.50 mm

NO. 73 0.50 mm

82 83

NO. 11 0.40 mm

PRODUCT FEATURES

Technical features

Application

Grows with its tasks. With a pointed blade.Deburring or cutting? Basically, you can do both with the TRIMMEX SU-PERTRIM. In this variant, you have a 0.40 mm strong blade with a promi-nent tip in your hands. It is ideal for piercing paper and cardboard and for exact cuts. The TRIMMEX SUPERTRIM also scores high in terms of comfort. One example: you can adjust the handle length individually depending on the hand size.

Installed blade



PRODUCT DETAILS

PRODUCT DETAILS

NO. 791 2.60 mm

NO. 795 2.60 mm

NO. 796 2.60 mm

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Grows with its tasks. With a deburring blade.Deburring or cutting? Basically, you can do both with the TRIMMEX SU-PERTRIM. There is an additional adapter in the blade holder in this variant so that you can use the 2.60 mm strong deburring blade. You can smooth down unclean workpieces with it. The TRIMMEX SUPERTRIM also scores high points due to its immense comfort. One example: the handle length can be adjusted individually according to the hand size.


Optional blade

NO. 1031 0.40 mm

NO. 10 0.40 mm

NO. 12 0.40 mm

NO. 13 0.40 mm

NO. 14 0.40 mm

NO. 15 0.40 mm

NO. 16 0.40 mm

NO. 33 0.50 mm

NO. 34 0.50 mmNO. 834 0.50 mm, TiN

NO. 605 0.50 mmNO. 8605 0.50 mm, TiN

NO. 629 0.50 mmNO. 8629 0.50 mm, TiN

NO. 643 0.50 mm

NO. 677 0.50 mm

NO. 679 0.50 mm

NO. 680 0.50 mm

NO. 681 0.50 mm

NO. 606 0.50 mmNO. 8606 0.50 mm, TiN

NO. 43 0.40 mm

NO. 72 0.50 mm

NO. 73 0.50 mm

84 85

NO. 606 0.50 mm

PRODUCT FEATURES

Technical features

Application

Discover its talents. With a rounded-off blade.A cutting tool that offers you a whole lot of possibilities? MARTOR has plenty of those. Like the TRIMMEX CUTTOGRAF with which you can cut and deburr effortlessly. We have fitted a blade with a rounded-off point in this variant which we recommend for both types of work. Your can adjust the blade extension individually according to the material and the use.

Optional blade

Installed blade


TRIMMEX CUTTOGRAFNO. 69606


NO. 11 0.40 mm

PRODUCT FEATURES



Application

Discover its talents. With a pointed blade.A cutting tool that offers you a whole lot of possibilities? MARTOR has plenty of those. Like the TRIMMEX CUTTOGRAF with which you can cut and deburr effortlessly. We have fitted a 0.40 mm strong blade in this variant which is especially suitable for handwork and cutting jobs with paper and cardboard. You can adjust the cutting depth individually ac-cording to the material and the use.


Optional blade

NO. 605 0.50 mmNO. 8605 0.50 mm, TiN

NO. 629 0.50 mmNO. 8629 0.50 mm, TiN

NO. 643 0.50 mm

NO. 677 0.50 mm

NO. 679 0.50 mm

NO. 680 0.50 mm

NO. 681 0.50 mm

NO. 8606 0.50 mm, TiN

NO. 43 0.40 mm

NO. 72 0.50 mm

NO. 73 0.50 mm

NO. 1031 0.40 mm

NO. 10 0.40 mm

NO. 11 0.40 mm

NO. 12 0.40 mm

NO. 13 0.40 mm

NO. 14 0.40 mm

NO. 15 0.40 mm

NO. 16 0.40 mm

NO. 33 0.50 mm

NO. 34 0.50 mmNO. 834 0.50 mm, TiN

NO. 605 0.50 mmNO. 8605 0.50 mm, TiN

NO. 629 0.50 mmNO. 8629 0.50 mm, TiN

NO. 643 0.50 mm

NO. 677 0.50 mm

NO. 679 0.50 mm

NO. 680 0.50 mm

NO. 681 0.50 mm

NO. 606 0.50 mmNO. 8606 0.50 mm, TiN

NO. 43 0.40 mm

NO. 72 0.50 mm

NO. 73 0.50 mm

NO. 1031 0.40 mm

NO. 10 0.40 mm

NO. 12 0.40 mm

NO. 13 0.40 mm

NO. 14 0.40 mm

NO. 15 0.40 mm

NO. 16 0.40 mm

NO. 33 0.50 mm

NO. 34 0.50 mmNO. 834 0.50 mm, TiN

86 87

NO. 791 2.60 mm

NO. 795 2.60 mm

NO. 796 2.60 mm

PRODUCT FEATURES

Technical features

Application

Discover its talents. With a rotating deburring blade.Deburring or cutting? Basically, you can do both with the TRIMMEX CUT-TOGRAF. There is an additional adapter in the blade holder of this variant so that you can use the 2.60 mm strong, rotating deburring blade. You can smooth out unclean workpieces with it, especially at the rounded off points. The blade automatically adapts to the shape you are working on while doing so.

Optional blade

Installed blade




NO. 797 3.20 mm

NO. 756 3.20 mm, extra-fine

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Deburring? You‘ll soon get the hang of it.The TRIMMEX SWIVEL no longer has „Maxi“ in its name. Still, this deburring cutter continues to provide you with maximum flexibility as far as the ma-terials to be worked on are concerned. So you can deburr the round parts and edges of plastics, steel, aluminium and copper on the inside with the TRIMMEX SWIVEL. The sting: the blade, stored so that it can rotate, always adapts the suitable angle to the workpiece.

TRIMMEX SWIVELNO. 171797

88 89


PRODUCT FEATURES

Technical features

Application

The narrow burr is its ambit.After you have injected, drilled, milled and cut out your workpiece, there is a final work step: deburring. Anyone who wants to be precise here, will be very well equipped with the TRIMMEX PELLEX. Its V-shaped sharpened blade can best be used for cutting extra thin plastic skins. Make use of the large range of alternative blades for other applications.

Optional blade

Installed blade


TRIMMEX PELLEXNO. 850


NO. 605 0.50 mm

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

A fine tool. Even for tougher uses.Beautifully shaped and flexible - you can easily carry out all fine and even rough deburring work with the TRIMMEX GRATEX. Plastics are its preferred area of work. But it provides valuable services in crafts and in graphic arts too. The long handle gives you enough space to maintain a relaxed hand position.

TRIMMEX GRATEXNO. 111605

NO. 673 2.50 mm

NO. 677 0.50 mm

NO. 679 0.50 mm

NO. 680 0.50 mm

NO. 681 0.50 mm

NO. 34 0.50 mmNO. 834 0.50 mm, TiN

NO. 629 0.50 mmNO. 8629 0.50 mm, TiN

NO. 605 0.50 mmNO. 8605 0.50 mm, TiN

NO. 606 0.50 mmNO. 8606 0.50 mm, TiN

NO. 606 0.50 mmNO. 8606 0.50 mm, TiN

NO. 8605 0.50 mm, TiN

90 91

NO. 629 0.50 mm

PRODUCT FEATURES

Technical features

Application

Metal on the inside, plastic on the outside, round at the front.The TRIMMEX SIMPLASTO is something like a twin of the TRIMMEX SIMPEL. The only difference is that it is covered with non-slip plastic. It is best used for fine and precise cutting work with paper and cardboard. Or you can deburr different types of plastic parts with it. You can safely shield the pointed blade with the plastic cap included.

Optional blade

Installed blade


TRIMMEX SIMPLASTONO. 514


NO. 34 0.50 mm

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Metal on the inside, plastic on the outside, pointed at the front.The TRIMMEX SIMPLASTO is something like a twin of the TRIMMEX SIMPEL. The only difference is that it is covered with non-slip plastic. It is best used for fine and precise cutting work with paper and cardboard. Or you can deburr different types of plastic parts with it. You can safely shield the pointed blade with the plastic cap included.

TRIMMEX SIMPLASTONO. 35134

NO. 34 0.50 mmNO. 834 0.50 mm, TiN

NO. 8629 0.50 mm, TiN

NO. 629 0.50 mmNO. 8629 0.50 mm, TiN

NO. 834 0.50 mm, TiN

92 93

PRODUCT DETAILS

NO. 629 0.50 mm

PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

High performance per gramme. With a rounded off blade.At only 17 grammes, the TRIMMEX SIMPEL hardly carries any weight. Its capacity is all the more remarkable. You can use it effortlessly to deburr different types of plastic parts. Or use it for fine cutting work with pa-per and cardboard. The rounded off blade tip serves to protect you by de-sharpening your tool at that point.

TRIMMEX SIMPELNO. 513

NO. 34 0.50 mm

PRODUCT FEATURES

Technical features

Application

High performance per gramme. With a pointed blade.At only 17 grammes, the TRIMMEX SIMPEL hardly carries any weight. Its capacity is all the more remarkable. You can use it effortlessly to deburr different types of plastic parts. Or use it for fine cutting work with paper and cardboard. You can change the very pointed blade in a few hand grips.

Optional blade

Installed blade


TRIMMEX SIMPELNO. 34134

PRODUCT DETAILS

NO. 34 0.50 mmNO. 834 0.50 mm, TiN

NO. 8629 0.50 mm, TiN

NO. 629 0.50 mmNO. 8629 0.50 mm, TiN

NO. 834 0.50 mm, TiN

94 95

NO. 170 1.70 mm, acid resistant


PRODUCT FEATURES

Technical features

Application

Ceramic for deburring. With a straight blade.Why are ceramic blades ideal for deburring plastics and metals? Because they are very resistant und durable due to their enormous hardness. That‘s why the TRIMMEX CERACUT can smooth edges and remove sprayed points and separation lines from mould halves. Furthermore, the char-acteristic grinding of the MARTOR ceramic blade minimizes your personal risk of injury.

Optional blade

Installed blade


TRIMMEX CERACUTNO. 170170




PRODUCT FEATURES

Technical features

Optional blade

Installed blade


Application

Ceramic for deburring. With a concave blade.Why are ceramic blades ideal for deburring plastics and metals? Because they are very resistant und durable due to their enormous hardness. That‘s why the TRIMMEX CERACUT can smooth edges and remove sprayed points and separation lines from mould halves. Furthermore, the char-acteristic grinding of the MARTOR ceramic blade minimizes your personal risk of injury.

TRIMMEX CERACUTNO. 170171

Accessories are things that belong with a tool. In

the best sense. Our accessories ensure, for exam-

ple, that you can store your cutting tool safely. Or

dispose of your used blades in an optimal manner.

ACC

ESSO

RIE

S

8 99




Certified safety We always design our cutting tools to the high-est standards. So why should our accessories be anything less? Our MARTOR BELT HOLSTERS were therefore tested for harmful substances and stability - and were found to be very good.

Does it fit? Fits perfectly Our MARTOR BELT HOLSTERS S, M and L are precisely tailored for our cutters - and not just that. Depending on the size of the pocket, it allows you to carry a combination of various tools: cutter/pen cutter/scissors, cutter/cut-ter, cutter/pen/scissors etc.

Intelligent spacesaver With the MARTOR BELT HOLSTER you will always discover new storage op-tions. A compartment here, a slot there - all designed so precisely to ensure the contents are kept as firmly as necessary while offering you maximum flexibility.

2 attachment options The belt holster can be attached to your belt in two ways: by clip-on or velcro fastener. Velcro is recommended for belts; the clip can also be used on many other areas of your clothing, such as your trouser pocket.

Robust material The BELT HOLSTER is now an integral part of every-day working life. So there is no inconvenience. This is further guaranteed by its durable nylon material, washable at 40°C, which is held together by double seams - even when sub-ject to permanent use.

Everything always at hand: BELT HOLSTER L.What do you do with your cutting tools when you are not actually using them? The MARTOR BELT HOLSTER L is a robust holder that allows you to carry all large MARTOR cutters as well as our safety scissors at all times. In addition, the interior and exterior pockets are designed to allow you to load differ-ent tools: for example you can carry an extra cutter, a pen and a pack of blades. The MARTOR BELT HOLSTER is the ideal place to stow your tools safely when moving from A to B - and have them at hand, as soon as they are required.

BELT HOLSTER L WITH CLIPNO. 9922.08

BELT HOLSTER M WITH CLIPNO. 9921.08

BELT HOLSTER S WITH CLIPNO. 9920.08

Everything always at hand: BELT HOLSTER M.The MARTOR BELT HOLSTER M is a robust hold-er that allows you to carry all midsize MARTOR cutters as well as our small scissors at all times. In addition, the interior and exterior pockets are designed to allow you to load different tools: for example you can carry an extra cutter, a pen and a pack of blades.

Everything always at hand: BELT HOLSTER S.The MARTOR BELT HOLSTER S is a robust holder that allows you to carry all compact MARTOR cutters as well as our small scissors at all times. In addition, the compartments are designed to allow you to load different tools: for example you can also carry a pen or a pack of blades.

Application

Application

Suggested equipment:BELT HOLSTER L For example for- SECUPRO 625- SECUMAX 363

Suggested equipment:BELT HOLSTER S For example for- SECUNORM 380- SECUMAX 363

Suggested equipment:BELT HOLSTER M For example for- SECUPRO MARTEGO- SECUMAX 363

Application

101101


For the final disposal of your blades.You can fill the USED BLADE CONTAINER with the content of your SAFEBOX. Or directly with your used blades. When the box is full, turn the lid until it shuts. Now the box cannot be reopened. The next step is to safely and completely dis-pose of the filled USED BLADE CONTAINER.

USED BLADE CONTAINERNO. 9810

Application

Makes the USED BLADE CONTAINER accessible to all.Include it in your order now! With this mounting bracket you can fix your USED BLADE CONTAINER to a central location. Use the clamp and screws and nuts supplied with the product to attach it to either a pipe or a rod.

WALL MOUNT BRACKET USED BLADE CONTAINERNO. 9845

Application


Your personal used-blade bank.The SAFEBOX is large enough to store a large number of used blades safely. And at the same time, it is compact enough to carry with you. The two slits are not only used for filling, but also to „shorten“ your snap-off blades. When your SAFEBOX is full, empty it into your USED BLADE CONTAINER.

SAFEBOXNO. 108000

Application

HOLSTER SMALLNO. 9842

Application


HOLSTER LARGENO. 9843

Application


100


For our wider cutting tools.Your cutting tool will feel comfortable in this ‚no-fuss‘ plastic HOLSTER. Attach it to your belt, or with a clip to your jeans pocket. This larger black HOLSTER is suitable for example for storing the ARGENTAX ROBUST.

For our more slender cutting tools.This blue plastic HOLSTER is just like the black version, only smaller. Use this blue HOLSTER to safely store and transport for example the ARGENTAX MULTIPOS.

SICHERHEITSMESSER UND -SCHEREN2016/2017

MARTOR WERBEMESSER 2

FÜNF GUTE GRÜNDE,

ZU VERSCHENKEN.

103102

>> Media available in different languages

OUR ADDITIONAL SERVICE MEDIA:BROCHURES, CATALOGUES ETC.

Safety knives and scissorsIn this catalogue we present you our safety knives: high quality cut-ting tools equipped with reliable safety technologies such as con-cealed blade, fully automatic blade retraction and automatic blade re-traction. Furthermore: our SOS and MDP (= metal detectable) cutters.

You can request these and all other service media directly from us – ideally by calling our service number or by visiting our website, where they are available for download.

Promotional knives brochureAnother MARTOR product family is our promotional knives. They are introduced to you individually in this brochure. No matter whether you work as a distributor for pro-motional products or whether, as a company or institution, you are looking for the ideal promotion-al gift for yourself or your target group.

OUR WEBSITE.WITH CUSTOMER-ORIENTED SERVICES.

When looking for the best possible product there is nothing like personal assistance, which is one of our strengths. Nevertheless, we would like to satisfy your needs in the best possible way also in other areas - e.g. on our website www.martor.com. Where you can find new functionalities, such as the product filter, providing you with an even better overview of our cutting solutions.

Filter allWhich material do you want to cut? And what technical properties should your safety knives have? You can access a selection of suitable products quickly and comfortably through these and many other filter functions.

Compare allNo doubt there are cutting tools in our product range that are similar. So it‘s worth it to take a second view. With the functionality to compare products, you can select up to four cutting tools and check them against each other. Discover the product details to find the most suitable cutting tool.

WWW.MARTOR.COM

105104

THE PICTOGRAM LEGEND.ALL MARTOR PICTOGRAMS AT A GLANCE.

Our new pictogram system helps you to find the optimal product.These little symbols inform you

about the safety level, the main cutting materials or the condition of the handle, for example.

All handle details

All blade details

TECHNICAL FEATURES

Safety technology

Max i mum safe ty Very high safe ty High safe ty Ba sic safe ty

Me t al de tectable Very abra sion re sis tant Abra sion re sis tant Full me t al hous ing

Very er go nom ic Ergonomic Safe ty lock Soft-grip

For right and left han der

For right han der For left han der Lan yard hole

Clip Heavy-du ty Pre ci sion cutt ing Fold able for stor age

Pro tec tion cap An ti-slip Ad justable han dle length Di am e ter and form of grip

Ace ton re sis tant Heat re sis tant Print able for pro mo tio n al pur pos es

Safer blade change (with mag net)

Blade change with tool

Tool-less blade change

Dis pos able knife

2-times us able blade

4-times us able blade

Spare blades in knife body

Ex tend ed blade length

Ad justable blade length

Cutt ing depth Ad justable cutt ing depth

Scrap er width

Tape split ter Blade re tractable Ro tat able blade Adapt able blade po si tion er

stain less TiN coat ed Acid-re sis tant Ce ram ic

Round ed tip hooked blade

Round ed tip industrial blade

Round ed tip scalpel blade

Round ed tip trapeze blade

1-sid ed ground-edge

2-sid ed ground-edge

Wide ground-edge

MAIN CUTTING MATERIALS

SERVICE

Card board: 1-ply

Card board:up to 2-ply

Card board: up to 3-ply

Card board: up to 4-ply

Wrap ping, stretch, and shrink foil

Tape Plas tic strap ping band

Bagged goods

Lay ers of foil or pa per

Slab bing ma te rial off a roll

En ve lope Foam, polys tyrene

Rub ber PVC Car pet Tex tile, ma te rial

Fleece Felt Leather Vel cro

Yarn, cord Coat ed film Lam i nat ed film Glass in ter lay er

Dis pens ing noz zle Safe ty belt Bal sa wood Plas tic burr

Rub ber burr Me t al burr Self-ad h e sive la bel

Ce ram ic glass cook er top

Con sult ing ser vice

MARTOR KG | Heider Hof 60 | 42653 Solingen | GermanyT +49 212 25805-0 | F +49 212 25805-55 | [email protected] | www.martor.com

THE REFINEMENT:SERVICE AND ADVICE OF MARTOR.

What is it that makes our cutting solutionseven safer? Our advisory services. We arealways there for you and help you withusage examples, training material and, ofcourse, personal assistance.

You will find further information on ourwebsite: www.martor.com

Any further questions?Then please do not hesitate to contact ourcustomer service team.

2.16.2.2 | Printed in GermanySubject to technical changes

martor cutters and speciality knives 2016...14 15 no. 79 0.50 mm, 109.5 mm long no. 179 0.50 mm,...

Documents