mary sue rich community center at reed place ......if the fabricator is unable to comply with this...
TRANSCRIPT
MARY SUE RICH COMMUNITY CENTER
AT REED PLACE
FF&E PACKAGE
JUNE 11, 2020
Exhibit E-FF&E Package
E-1
TABLE OF CONTENTS
Project Directory
Purchasing Preamble
Manufacturer List
FF&E Item Index
FF&E Specifications
MARY SUE RICH COMMUNITY CENTER
AT REED PLACE
Exhibit E-FF&E Package
E-2
PROJECT
DIRECTORY
MARY SUE RICH COMMUNITY CENTER
AT REED PLACE
Exhibit E-FF&E Package
E-3
Project Directory
Project #: 19030
Project Name: Ocala Community Center
Property:
Address: Intersection of NW 17 Street and NW 22nd Ave
Ocala, FL
Contact: Kathy Crile
Phone: (352) 368-5517
ARCHITECT
Company: OLC Architecture
Address: 2295 S. Hiawassee Road Suite 310
Orlando, FL 32835-
Phone:
Contact: Sam Elsheikh
Mobile: (303) 886-4082
Email: [email protected]
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CLIENT
Company: City of Ocala Florida
Address: 110 SE Watula Avenue
Ocala, FL 34471-
Phone: (523) 516-7722
Contact: Sean Lanier
Sean Lanier
Mobile:
Email:
INTERIOR DESIGNER
Company: OLC
Address: 1401 Zuni St Suite 102
Denver, CO 80204-
Phone: (303) 294-9244
Contact: Brenda Amsberry
Mobile: (303) 919-5288
Email: [email protected]
Exhibit E-FF&E Package
E-4
PURCHASING
PREAMBLE
MARY SUE RICH COMMUNITY CENTER
AT REED PLACE
Exhibit E-FF&E Package
E-5
1401 Zuni Street, Suite 102
Denver, CO 80204
Preamble
TABLE OF CONTENTS
0.0 Introduction
0.1 General Notes and Conditions 0.2 Life Safety & Fire Protection
3.0 Casegoods
3.1 Construction Specifications 3.2 Approved Bidders
4.0 Upholstered Goods
4.1 Construction Specifications 4.2 Approved Bidders
Exhibit E-FF&E Package
E-6
1401 Zuni Street, Suite 102
Denver, CO 80204
0.0 INTRODUCTION
0.1 GENERAL NOTES AND CONDITIONS
A. Scope The following specifications have been prepared in accordance with Owner approved design
schemes and budgets by OLC for the following areas of the project: All interior paces
B. Item Mark The item mark is a code number used to locate each item on a furniture, finish or reflected ceiling
plan.
C. Furnishings & Finishes Legend
D. Item Specification Items which have been specified by manufacturer shall be commercial quality and purchased as
such. The manufacturer's specifications and standards are to be considered a part of this package and reference to catalog numbers or designations shall be understood to include all identified particulars by that number unless modifications are noted.
E. Item Substitution
Any substitution of a specified item must be approved by the designer and the following procedures followed:
1. Any substitutions of a specified product requested by the Owner will be submitted for approval
to OLC and approved only if in character with the design intent. OLC assumes no responsibility for performance of substituted items requested by the Owner, nor responsibility for potential copyright or patent infringement due to said substitutions.
2. Any substitution must meet all applicable federal, state, local or other codes and regulations.
Mockups or sample for flame testing shall be provided by the manufacturer at their expense. Testing and documentation proving compliance shall be the responsibility of the purchasing agent or vendor.
3. Full size samples will be required for all items proposed for substitution.
4. The cost of shipment and return of the proposed substitution item shall be the responsibility of
the purchasing agent or vendor.
5. All samples shall be submitted for the designer's approval before installation or fabrication.
6. Samples shall be submitted to:
Brenda Amsberry OLC Architects 1401 Zuni St. Suite 102 Denver, CO 80204
Exhibit E-FF&E Package
E-7
1401 Zuni Street, Suite 102
Denver, CO 80204
E. Custom Submittals Items which have been specified as custom or bid source shall be commercial quality and require
submission of shop drawings, samples, manufacturer's specifications and/or finish samples to the designer for approval prior to application or fabrication. 1. When field measurements are required for a custom item, they are the responsibility of the
fabricator. If the fabricator is unable to comply with this requirement, it becomes the Owner's responsibility to furnish field measurements.
F. Item Quantity
1. Furniture and accessory quantities indicated on the specifications are per exact floor plan
count and shall be verified by the Owner or the Purchasing Agent.
2. Purchasing Allowance has not been made for spares or surplus unless noted otherwise.
3. Quantities indicated for finishes are based on Interior Designer's estimates and shall be verified by the designated installer.
4. Client and/or its Purchasing Agent are solely responsible for quantities.
G. Flame Spread Certificate
Items requiring Flame Spread Certificates for City Occupancy Permits are indicated on the
specification. Copies of the Flame Spread Certificates should be requested on purchase orders and kept on file by the Purchasing Agent while work is in progress. When work is complete, the certificates should be forwarded to the Owner along with a sample of the material to facilitate identification.
H. Item Availability The items specified in this package require varying amounts of time for manufacture and delivery.
Manufacturing and delivery time shall be verified and coordinated by the Purchasing Agent in coordination with the Owner's schedule.
I. Delivery Identification Each crate, carton and package of furnishings shall be plainly tagged or marked on the exterior with
an identification of the items according to the designer's code as follows:
Example: CG01 Dresser - Long Alternate identification is acceptable if coordinated with purchasing agent.
J. Decorative Lighting All hardwired decorative lighting items specified in this package are to be installed by the General Contractor. The Purchasing Agent is responsible for coordinating delivery of these items with the General Contractor.
K. Fabric Cuttings Purchasing Agent is responsible for receiving fabric cuttings for dye lot & fabric finish treatment approval. Submit fabric cuttings to OLC for approval prior to purchasing fabric.
Exhibit E-FF&E Package
E-8
1401 Zuni Street, Suite 102
Denver, CO 80204
L. Fabric & Wall Covering Finishes 1. Purchasing Agent is responsible for coordination & delivery of fiber protection treatment &
flame retardant finishes to be applied to materials indicated on individual specifications. 2. Approved Bidders:
Kiesling & Hess Co. 300 West Bristol Street Philadelphia, PA 19140 215-457-0906 Resistflame Finishing Co. 7115 Miami Ave. Cincinnati, OH 45243 1-800-543-1832 Houston Fiber Protection 944 Old Katy Rd., Suite 114 Houston, TX 77055 713-465-4040
M. Corresponding Interior Drawings & Plans
The item mark numbers are coded to the Furniture & Finish Plans prepared by OLC. Finishes are also indicated on the elevations details and reflected ceiling plans.
N. Purchase Orders Purchasing Agent is required to submit purchase orders to designer for review.
O. Revisions
Specific revised information will be marked by bubbling and a delta symbol with revision number.
P. Item Cost All costs denoted within the FF&A Specifications are net cost only. Costs do not include tax, freight, crating, etc.
0.2 LIFE SAFETY & FIRE PROTECTION
A. Fire Prevention Codes
Requirements for flame ratings of all specified furnishings and finishes within this booklet are as
follows:
• Upholstery Fabric Class I - NFPA 260A or CAL 117E • Upholstery Foam CMHR or Equal • Carpet Class II Flooring Radiant Panel Test ASTM-E648
Smoke Density ASTM-E662 • Wall Covering Class A ASTM-E84 Tunnel Test • Window Treatment & Vertically
Hung Fabrics Class A NFPA-701 (i.e. dusters, table skirts)
B. Fire Prevention Codes • 2017 Florida Fire Code
Exhibit E-FF&E Package
E-9
1401 Zuni Street, Suite 102
Denver, CO 80204
3.0 CASEGOODS 3.1 CONSTRUCTION SPECIFICATIONS
A. Scope
The Casegood Contractor (referred to as Contractor throughout the rest of this specification) shall construct all cases and provide any and all necessary items needed to complete the job. Workmanship should follow industry practices and be of the finest quality. (AWl premium grade). 1. Contractor is fully responsible for coordination of work with designer's specifications, lead time
quotes to purchasing agent and any other variables affecting fabrication and ready to ship completion of items.
B. General Requirements
1. Bids shall include:
- All items listed separately. - Cost of each item. - Total cost of casegoods. - Total cost of freight. - Total cost of tax.
2. Insurance coverage in amounts meeting with the Owner's approval shall be carried by the
Contractor for the life of the contract, and a certificate of such coverage will be provided to the purchasing agent. This includes, but is not limited to, Worker's Compensation, Property Insurance, and General Liability including products liability, bodily injury and property damage.
3. The Contractor is responsible for submitting shop drawings including elevations showing
dimensions and large-scale details. Attachment devices, hardware and finish samples must also be submitted to Designer unless indicated otherwise. Construction and/or fabrications should not take place until the Designer's approval is received.
4. Site conditions are to be reviewed prior to fabrication. Built-in and built-on site items shall be
field dimensioned. Items shall be the maximum wall-to-wall length possible or evenly sectioned as required. All built-in it3ems must fit tightly and be leveled during installation to coordinate with existing conditions.
5. All finished items are to be blanket wrapped, ready for freight unless directed otherwise by
Purchasing Agent. If Contractor is to supply crating, the Purchasing Agent will indicate this, and Contractor will charge accordingly. Materials and completed items shall be stored under cover in dry, well ventilated spaces, protected from damage, dirt, stains and moisture. 3.10-2
6. The Contractor shall notify the Purchasing Agent immediately in writing if any conditions exist
which will prevent them from producing satisfactory finished work. Contractor will automatically assume responsibility for any unacceptable finished work caused by faulty materials.
Exhibit E-FF&E Package
E-10
1401 Zuni Street, Suite 102
Denver, CO 80204
C. Construction and Workmanship
1. General Requirements:
a. Casework shall conform to the highest commercial standards, shall reflect details shown on drawings and shall be fabricated in accordance with the Architectural Woodwork Institute as follows: Wood Casework shall be AWl Premium Grade; Plastic Laminate Clad Casework shall be AWl Custom Grade. Wood construction is to be selected, seasoned, kiln-dried, and worm-free lumber.
b. All major joints are to be doubled doweled, glued, and screwed with accurately fitted joints,
corners, and miters. Glue stains are unacceptable. Exposed surfaces shall be free from dents, tools marks, warping, buckling and open joints. Surfaces exposed to view should not be stamped on, printed on or marked with identification labels.
c. Joints shall be splined, mortise and tenoned, tongue and grooved, or double dowelled.
Joints shall be full length blocked, glued, and screwed in two directions, following the best practice of construction. All work shall be carefully corner-blocked, well fitted, glued and reinforced with wood screws. Glued stains are unacceptable. joints on horizontal surface to be moisture proof to ensure against liquid seepage into frame.
d. Hardwood plywood shall be constructed according to the requirements of commercial
standards. All face veneers shall be matched for color and grain to present a uniform appearance. When back veneers are of different species than face, they shall be of the same density and thickness.
e. Drawers to have clean and smooth interiors sanded, waxed and sealed. Manufacturer to
provide heavy-duty wood veneer interior finish, commercial drawer glides with stops. Drawer joints to be even and smooth, dovetailed or dado joined. Manufacturer to coordinate locks and lock sequencing for all casegoods and furniture as required.
f. Interior cavities (i.e. cabinets, shelves, drawers, etc.) are to be fully finished with wood
veneer by manufacturer unless specified otherwise. g. Manufacturer to provide vented back panels and grommet holes for all interior equipment
as required. All sizes and dimensions of equipment to be determined based on specifications.
h. All materials used in the finishing of furniture shall be of the highest quality standard. Each
step of the work shall be thoroughly sanded, smoothed, and cleaned before any finish is applied. Finishes to be of highest-grade catalyzed lacquer resistant to water, alcohol, and chemical stains. All exposed members shall be made to conform as specified, in color and finish. In production, finish needs to be consistent and smooth with no rough edges. 3.10-4
i. Concealed Surfaces are surfaces not normally visible after installation and surfaces less
than 30" above finish floor.
2. Laminating Surfacing Requirements
a. Exposed Surfaces - High pressure laminates with a nominal thickness of 0.05" for horizontal and high usage exposure and 0.028" for vertical and medium usage exposure.
b. Semi-Exposed Surfaces - High pressure laminate, cabinet liner, polyester or melamine
laminated panels (vinyl overlays are not acceptable). Edge treatment is to be of compatible laminate.
Exhibit E-FF&E Package
E-11
1401 Zuni Street, Suite 102
Denver, CO 80204
c. Joinery and Fastening
Fixed case body members (shelves, bottoms, tops, and rails which are fastened to sides, ends or dividers) shall be joined using concealed dado, dowels or screws. No nails, screws or other fastening may be visible on exposed surfaces but may be visible on semi-exposed surfaces.
d. Hardware
Provide full-extending ball-bearing roller type drawer guides and appropriate hinges, pulls, latches, etc., to provide proper casework function. All hardware is to be reviewed and approved by Interior Designer prior to installation. Also, provide nylon adjustable levelers at base and/or legs.
3. Transparent and Opaque Finish Wood Casework
a. Cabinet Parts Exposed Surfaces include surfaces visible when drawers and opaque doors are closed, areas behind glass doors, bottoms of cabinets 42" or more above finish floor and tops of cabinets below 78" above finish floor. Semi-Exposed Surfaces are surfaces which become visible when drawers are extended, when opaque doors are opened (including backs of doors), bottoms of cabinets more than 30" above finish floor and less than 42", and tops of cabinets 78" or more above finish floor when visible from above. Concealed Surfaces are surfaces not normally visible after installation and surfaces less than 30" above finish floor.
b. Surface Requirements
Refer to casegood specification for wood species. Material grade for exposed transparent finish to be Grade I, exposed opaque finish to be Grade II, semi-exposed transparent finish to be Grade II, semi-exposed opaque finish to be Grade III (Exception: Grade II for panel products), and Grade IV for concealed surfaces (based on AWI grade). Solid wood is required for exposed outside corners and similar abuse locations. Solid wood to be a minimum of 3/4" thick unless noted otherwise (Exception: Drawer sides, backs, and sub fronts may be 1/2" thick and drawer bottoms may be 1/4" thick, U.N.O.). Hardwood veneer plywood complying with 3.10-5 CS3561, Type II; core-veneer, lumber or wood chip may be used in lieu of hardwood in locations not likely to receive physical abuse. Edge treatment for body members, shelves, doors, and drawer fronts to be the same species as face for transparent finishes, and close grain materials for opaque finishes. Edge banding to be pressure glued. All edges must be banded.
c. Joinery and Fastening
Drawers are to be doweled (maximum 2" spacing) and glued and nailed, lock shoulder joined and glued and nailed, or doweled and glued. Exposed case body ends are to be mitered to end (splintered miter or lock miter) and glued, unless noted otherwise. Case body members are to be joined by dado (stop dado if transparent finish), doweled, or screwed (all glued). Stile and rail joints shall be blind mortised and tenoned, doweled, or concealed screwed (all glued).
d. Surface Smoothness Exposed transparent finish surfaces require sanding with paper no coarser than 120 grit. Exposed opaque finish surfaces are to be sanded with paper no coarser than 100 grit. No cross scratches are allowed. Semi exposed transparent and opaque finishes are to be sanded with paper no coarser than 100 grit and with cross scratches not to exceed 1/4".
Exhibit E-FF&E Package
E-12
1401 Zuni Street, Suite 102
Denver, CO 80204
e. Factory Finishing All casegoods are to be factory finished. Provide the Designer with finish samples of wood (12" x 12") to match finish supplied by Designer. Finish process to be a minimum of two coats of sealer plus two coats of lacquer (30% sheer) unless specified otherwise. Concealed surfaces are to receive one coat of sealer. All horizontal wood surfaces are to receive an alcohol and water-resistant contract sealer.
f. Hardware
Provide full extending ball-bearing roller type drawer guides and appropriate hinges, pulls, latches, etc. to provide proper casework function. All hardware is to be reviewed and approved by Interior Designer prior to installation. Also provide nylon adjustable levelers at base and/or legs.
C. Clean-Up Case pieces are to be readied for wrapping by cleaning to remove minor defects that occurred in production.
D. Guarantee All materials and work provided by the Contractor shall be guaranteed by them against defects in installation, materials and workmanship for a period of one (1) year from date of installation. Any adjustments to the installation, 3.10-6 materials and/or workmanship, shall be made within one (1) year from date of installation at no extra charge. 3.20-1
3.1 APPROVED BIDDERS A. General Note
OLC assumes no responsibility for recommendation. If purchasing agent would like to add to the bid list, submit brochure of proposed new bidders and client reference list to OLC. OLC will require samples as specified.
4.0 UPHOLSTERY 4.1 CONSTRUCTION SPECIFICATIONS
A. Scope
1. The Upholstery Contractor (referred to as Contractor throughout the rest of this specification)
shall construct all frames and upholster same frames and provide any and all necessary items needed to complete the job. Workmanship should follow industry practices and be of the finest quality.
2. Contractor is fully responsible for coordination of work with designer's specifications, lead time
quotes to purchasing agent and any other variables affecting fabrication and ready to ship completion of items.
3. Contractor is responsible for providing purchasing agent with material quantities needed to
complete the job. Contractor is responsible for any discrepancies between quantities quoted and used. Quantity overages in excess of 5% are the responsibility of the Contractor. Any shortages are the responsibility of the Contractor.
Exhibit E-FF&E Package
E-13
1401 Zuni Street, Suite 102
Denver, CO 80204
B. General Requirements 1. Bids shall include:
- All items listed separately and yardage for each. - Cost of each item. - Total cost of upholstered goods. - Total cost of freight. - Total cost of tax.
2. Insurance coverage in amounts meeting with the Owner's approval shall be carried by the
Contractor for the life of the contract, and a certificate of such coverage will be provided to the purchasing agent. This includes, but is not limited to, Worker's Compensation, Property Insurance, and General Liability including products liability, bodily injury and property damage.
3. The Contractor is responsible for submitting shop drawings and samples of all Finishes,
showing all points of design, construction and reinforcement to OLC for review and written approval. Fabrication should not take place until the designer's approval is received.
4. If Contractor is supplying upholstery fabric, they are responsible for Scotchgard and flame
retardant treatment. 5. All finished items are to be plastic wrapped and tagged with Designer's item mark code, ready
for freight. If Contractor is to supply crating or blanket wrapping, the purchasing agent will indicate this, and Contractor will charge accordingly. Materials and completed items shall be stored under cover in dry, well ventilated spaces, protected from damage, dirt, stains and moisture. 4.10-2
6. The Contractor shall notify the Owner immediately in writing if any conditions exist which will
prevent them from producing satisfactory finished work. The beginning of fabrication will indicate the contractor’s acceptance of products. Contractor will automatically assume responsibility for any unacceptable finished work caused by faulty materials.
C. Construction and Workmanship General Note: Upholstered goods shall conform to the highest commercial standards and shall reflect details shown on drawings. Parts not specifically identified shall be made of materials most appropriate for their intended use. 1. Frames
All wood construction must comply with AWl "Custom Grade" or better-quality standards.
a. Frame constructed of five quarter, kiln-dried, worm free, hardwood. Hardwoods shall be birch, poplar, soft maple, gum or sycamore.
b. Frame to be reinforced with corner blocks that are glued and screwed to the rail. All major
joints must be double doweled, glued and screwed with accurately fitted joints, corners and miters.
c. Fire retardant construction. d. Provide nylon glides at base and/or legs. e. Glue stains are unacceptable.
Exhibit E-FF&E Package
E-14
1401 Zuni Street, Suite 102
Denver, CO 80204
f. Exposed surfaces shall be free from dents, tools, marks, warping, buckling and open joints. g. Surfaces exposed to view shall not be stamped on, printed on or marked with identification
labels.
2. Webbing Seats to be of pure jute 4" wide. Back to be of pure jute 3 112" wide. Attach frame as close to 5" centers as possible, tightly stretched, interlaced with I" turnover at ends.
3. Springs
Springs to be hand-tied connecting insulated wire. Seat suspension to be no-sag, 8-gauge sinuous wire. Universal springs to have lifetime guarantees. Tight backs much be constructed with ll-gauge, no sag sinuous wire.
4. Filling
Synthetic hair applied over the burlap and affixed with stitching twine to prevent shifting. Synthetic hair is covered with a muslin cover. The muslin is covered with a fire-retardant barrier fabric, i.e. Burlington's Sandel.
5. Cushions
Constructed of foam or a feather/down pillow with a polydac center core with spring. CMHR foam or equal (meeting Boston Fire Code) to be wrapped with two layers of 8 oz. sewn Dacron and cased in muslin. 4.10-4
Custom pillows or those not produced as standard items shall be preceded by the submission of a preliminary sample. Manufacturer must submit sample to the designer for review and written approval prior to purchasing, manufacturing and installation of total quantity.
D. Clean-up
Upholstered pieces are to be readied for wrapping by cleaning, brushing, etc. to remove lint, wrinkles or other minor defects that occurred in production. Fabric overages shall be bundled, tagged for identification and returned to Purchasing Agent.
E. Guarantee All materials and work provided by the Contractor shall be guaranteed by them against defects in installation, materials and workmanship for a period of one (1) year from date of installation. Any adjustments to the installation, materials and/or workmanship, shall be made within one (1) year from date of installation at no extra charge. 4.20-1
4.2 APPROVED BIDDERS A. General Note
OLC assumes no responsibility for recommendation. If purchasing agent would like to add to the bid list, submit brochure of proposed new bidders and client reference list to OLC. OLC will require samples as specified.
Exhibit E-FF&E Package
E-15
MANUFACTURER
LIST
MARY SUE RICH COMMUNITY CENTER
AT REED PLACE
Exhibit E-FF&E Package
E-16
Item Number Item DescriptionQuantity
Index by Manufacturer
Project Name: Ocala Community Center
Project #: 19030
ARC COM ARC COM FABRICSSource:
33 Ramland South
Orangeburg, NY 10962
Phone: 914-365-1100
Fax: 310-659-2810
Contact: Wendy Stoll
800 #: 800-228-7906 Phone: 303-220-7380
Fax: 303-220-5150
Contact: Wendy Stoll
6456 South Quebec, Suite 45
Englewood, CO 80111
E-mail: [email protected]: [email protected]
Mobile:
Other:
SGF-09.2 Sofa Seat COM9 yds
SGF-10 Flair Lounge Chair COM39 yds
DECCA CONTRACT DESIGN THEORY, LLCSource:
2100 Summer St. NE Suite 100
Minneapolis, MN 55413-
Phone: (612) 362-0007
Fax: (612) 362-0014
Contact: Customer Service
800 #: Phone: (303) 324-9975
Fax:
Contact: Tye Hindle
2535 Walnut Street Suite A1
Denver, CO 80205-
E-mail: [email protected]: [email protected]
Mobile:
Other:
RCP-09L Sofa - Left Hand1 ea
SG-09R Sofa - Right Hand1 ea
SG-10 Flair Lounge Chair10 ea
DESIGNTEX DESIGNTEXSource:
200 Varick Street
New York, NY 10014
Phone:
Fax:
Contact:
800 #: 800-221-1540 Phone: 303-722-1777
Fax: 303-722-7703
Contact: Kellie Bailey
601 South Broadway, Suite S
Denver, CO 80209
E-mail: [email protected]:
Mobile:
Other:
SGF-09.1 Sofa Back COM16 yds
DOR-VAL DOR-VALSource:
11800 Boul. Laurentien
Saint-Laurent, Quebec H4K 2E1 Canada
Phone: (514) 336-7780
Fax: (514) 745-2640
Contact: Customer Service
800 #: (800) 561-7780 Phone: (514) 336-7780
Fax: (514) 745-2640
Contact: Customer Service
11800 Boul. Laurentien
Saint-Laurent, Quebec H4K 2E1 Canada
E-mail: [email protected]: [email protected]
Mobile:
Other:
CG-21 End Table1 ea
CG-23 Square Activity/Game Table8 ea
SG-15 Folding Chair40 ea
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
Page 1 of 4
Exhibit E-FF&E Package
E-17
Item Number Item DescriptionQuantity
Index by Manufacturer
Project Name: Ocala Community Center
Project #: 19030
GLOBAL INDUSTRIAL GLOBAL INDUSTRIALSource:
11 Harbor Park Drive
Port Washington, NY 11050-
Phone: (888) 978-7759
Fax:
Contact:
800 #: Phone: (888) 978-7759
Fax:
Contact:
11 Harbor Park Drive
Port Washington, NY 11050-
E-mail:E-mail:
Mobile:
Other:
CG-01 Paint Storage Unit1 ea
CG-15 Folding Table17 ea
SG-02 Bench5 ea
HERTZ FURNITURE HERTZ FURNITURE Source:
170 Williams Dr.
Ramsey, NJ 07446-
Phone:
Fax:
Contact:
800 #: (800) 526-4677 Phone:
Fax:
Contact:
170 Williams Dr.
Ramsey, NJ 07446-
E-mail: [email protected]: [email protected]
Mobile:
Other:
CG-09 Conference Table2 ea
CG-13 Large Conference Table1 ea
MITYLITE CORPORATE MITYLITE CORPORATESource:
1301 West 400 North
Orem, UT
Phone:
Fax:
Contact:
800 #: (800) 909-8034 Phone:
Fax:
Contact:
1301 West 400 North
Orem, UT
E-mail: [email protected]: [email protected]
Mobile:
Other:
CG-14 Round Banquet Table40 ea
CG-18 Rectangular Banquet Table4 ea
MOORECO | VANERUM NORTH AMERICA MOORECO | VANERUM NORTH AMERICASource:
2885 Lorraine Ave.
Temple, TX 76501-
Phone:
Fax: (866) 888-7483
Contact: Customer Service
800 #: (800) 749-2258 Phone:
Fax: (866) 888-7483
Contact: Customer Service
2885 Lorraine Ave.
Temple, TX 76501-
E-mail:E-mail:
Mobile:
Other:
MS-09 Power Tower2 ea
MTS SEATING CAROL HUGHESSource:
1244 West Dean
Temperance, MI 48182
Phone: 313-847-3875
Fax: 313-847-0993
Contact: Charles Eisen & Associates
800 #: Phone: 303-744-3200
Fax: 303-744-3203
Contact: Carol Hughes
595 South Broadway, Suite 103W
Denver, CO 80209
E-mail:E-mail:
Mobile:
Other:
MS-07 Chair Truck6 ea
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
Page 2 of 4
Exhibit E-FF&E Package
E-18
Item Number Item DescriptionQuantity
Index by Manufacturer
Project Name: Ocala Community Center
Project #: 19030
MTS SEATING CAROL HUGHESSource:
1244 West Dean
Temperance, MI 48182
Phone: 313-847-3875
Fax: 313-847-0993
Contact: Charles Eisen & Associates
800 #: Phone: 303-744-3200
Fax: 303-744-3203
Contact: Carol Hughes
595 South Broadway, Suite 103W
Denver, CO 80209
E-mail:E-mail:
Mobile:
Other:
MS-08 Table Truck6 ea
MTS SEATING CHARLES EISEN & ASSOCIATESSource:
1244 West Dean
Temperance, MI 48182
Phone: 313-847-3875
Fax: 313-847-0993
Contact: Charles Eisen & Associates
800 #: Phone: 303-744-3200
Fax: 303-744-3203
Contact: Carrie Leonard; [email protected]
595 South Broadway, Suite 103W
Denver, CO 80209
E-mail:E-mail:
Mobile:
Other:
SG-11 Banquet Chair400 ea
NATIONAL BUSINESS FURNITURE RILEY MCCORMICKSource:
770 S. 70th St
Milwaukee, WI
Phone:
Fax:
Contact:
800 #: (800) 558-1010 Phone:
Fax:
Contact:
Denver, CO
E-mail: [email protected]: [email protected]
Mobile: (720) 545-4050
Other:
CG-10 Parent End Table1 ea
CG-16 Desk2 ea
CG-17 Executive Desk System w/ Credenza1 ea
CG-20 Collaboration Table1 ea
SG-03 Lounge Chair1 ea
SG-04 Sofa1 ea
SG-06 Conference Chair16 ea
SG-08 Parent Chair2 ea
SG-13 Side Guest Chair6 ea
SG-18 Ergo Task Chair8 ea
SG-19 Activity Chair32 ea
SG-20 Bariatric Chair3 ea
SIMPLY MODERN FURNITURE/AFA STORES SIMPLY MODERN FURNITURE/AFA STORESSource:
837 Jersey Avenue Suite 5m
Jersey City, NJ 07310-
Phone:
Fax:
Contact:
800 #: (888) 287-6133 Phone:
Fax:
Contact:
837 Jersey Avenue Suite 5m
Jersey City, NJ 07310-
E-mail:E-mail:
Mobile:
Other:
CG-06 End Table3 ea
CG-12 Cocktail Table8 ea
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
Page 3 of 4
Exhibit E-FF&E Package
E-19
Item Number Item DescriptionQuantity
Index by Manufacturer
Project Name: Ocala Community Center
Project #: 19030
TIGER SUPPLIES INC. TIGER SUPPLIES INC.Source:
27 Slevage St.
Irvington, NJ 07111-
Phone: (973) 854-8680
Fax:
Contact: Customer Service
800 #: (888) 844-3765 Phone: (973) 854-8680
Fax:
Contact: Customer Service
27 Slevage St.
Irvington, NJ 07111-
E-mail: [email protected]: [email protected]
Mobile:
Other:
CG-02 Tool Storage Unit1 ea
WAYFAIR WAYFAIRSource:
4 Copley Place 7th Floor
Boston, MA 02116-
Phone:
Fax:
Contact: Kayla Cyrs
800 #: (857) 559-4451 Phone:
Fax:
Contact: Kayla Cyrs
4 Copley Place 7th Floor
Boston, MA 02116-
E-mail: [email protected]: [email protected]
Mobile:
Other:
SG-07 Parent Bench/Shoe Cubbie1 ea
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
Page 4 of 4
Exhibit E-FF&E Package
E-20
FF&E ITEM INDEX
MARY SUE RICH COMMUNITY CENTER
AT REED PLACE
Exhibit E-FF&E Package
E-21
Index by Item Type
Item Description Item Number Item Qty
Project Name: Ocala Community Center
Project #: 19030
Issue Dt
CASEGOODS & CASEGOODS FABRIC
CG-01 Paint Storage Unit ea1.0006/11/20
CG-02 Tool Storage Unit ea1.0006/11/20
CG-06 End Table ea3.0006/11/20
CG-09 Conference Table ea2.0006/11/20
CG-10 Parent End Table ea1.0006/11/20
CG-12 Cocktail Table ea8.0006/11/20
CG-13 Large Conference Table ea1.0006/11/20
CG-14 Round Banquet Table ea40.0006/11/20
CG-15 Folding Table ea17.0006/11/20
CG-16 Desk ea2.0006/11/20
CG-17 Executive Desk System w/ Credenza ea1.0006/11/20
CG-18 Rectangular Banquet Table ea4.0006/11/20
CG-20 Collaboration Table ea1.0006/11/20
CG-21 End Table ea1.0006/11/20
CG-23 Square Activity/Game Table ea8.0006/11/20
MISCELLANEOUS & MISCELLANEOUS FABRIC
MS-07 Chair Truck ea6.0006/11/20
MS-08 Table Truck ea6.0006/11/20
MS-09 Power Tower ea2.0006/11/20
CEILING
RCP-09L Sofa - Left Hand ea1.0006/11/20
SEATING & SEATING FABRIC
SG-02 Bench ea5.0006/11/20
SG-03 Lounge Chair ea1.0006/11/20
SG-04 Sofa ea1.0006/11/20
SG-06 Conference Chair ea16.0006/11/20
SG-07 Parent Bench/Shoe Cubbie ea1.0006/11/20
SG-08 Parent Chair ea2.0006/11/20
SG-09R Sofa - Right Hand ea1.0006/11/20
SG-10 Flair Lounge Chair ea10.0006/11/20
SG-11 Banquet Chair ea400.0006/11/20
SG-13 Side Guest Chair ea6.0006/11/20
SG-15 Folding Chair ea40.0006/11/20
SG-18 Ergo Task Chair ea8.0006/11/20
SG-19 Activity Chair ea32.0006/11/20
SG-20 Bariatric Chair ea3.0006/11/20
SGF-09.1 Sofa Back COM yds16.0006/11/20
SGF-09.2 Sofa Seat COM yds9.0006/11/20
SGF-10 Flair Lounge Chair COM yds38.5006/11/20
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
Page 1 of 1June 11, 2020 10:45 AM
Exhibit E-FF&E Package
E-22
FF&E SPECIFICATIONS
MARY SUE RICH COMMUNITY CENTER
AT REED PLACE
Exhibit E-FF&E Package
E-23
21
Area Qty(s): 11: 1
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Paint Storage Unit
Item Number: CG-01
Item Quantity: 1 ea
Manufacturer: Global Industrial Source: Global Industrial
Revision(s):
Contact:
Phone: (888) 978-7759
Fax:
Address: 11 Harbor Park DrivePort Washington NY 11050-
Address: 11 Harbor Park DrivePort Washington NY 11050-
Contact:
E-mail:E-mail:
Web: https://www.globalindustrial.com/contactUsWeb: https://www.globalindustrial.com/contactUs
Phone: (888) 978-7759
Fax:
Description: Paint Storage Unit -Charcoal Metal Lockable 2-Door Cabinet
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
At Multipurpose Room A
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: CA41361872-02
Finish: Charcoal Powdercoat
Model Name: Sandusky Classic Storage Cabinet
Top Mat'l/Finish: Welded Metal
Width: 36"
Height: 72"
Depth: 18"
Notes: Features: Ajustable Shelves on 2" Centers w/ Raise Bottom Shelf. (3) Point Door Lock System; (3) Sets Hinges Per Door. Meets ANSI/BIFMA Shelf Standards. Greenguard Certified.
Instructions:
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
All casegoods to be commercial quality.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Purchasing agent to verify ship to address and lead times prior to procurement.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-01Page 1
Exhibit E-FF&E Package
E-24
21
Area Qty(s): 11: 1
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Tool Storage Unit
Item Number: CG-02
Item Quantity: 1 ea
Manufacturer: Tiger Supplies Inc. Source: Tiger Supplies Inc.
Revision(s):
Contact: Customer Service
Phone: (973) 854-8680
Fax:
Address: 27 Slevage St.Irvington NJ 07111-
Address: 27 Slevage St.Irvington NJ 07111-
Contact: Customer Service
E-mail: [email protected]: [email protected]
800# : (888) 844-3765 800#: (888) 844-3765
Web: https://www.tigersupplies.com/Web: https://www.tigersupplies.com/
Phone: (973) 854-8680
Fax:
Description: Tool Storage Unit
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
At Multipurpose Room A
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: TC-4810
Finish: Maple Veneer w/ Chemical Resistant UV Finish
Wood Species: Solid Maple
Dimensions: 60"W x 22"D x 84"H
Model Name: Diversified Woodworking Storage Cabinet
Base Mat'l/Finish: Rubber Base Molding
Notes: Features: Upper Portion of Cabinet Lined with 1/4" Pegboard; Lower Storage Space Includes (1) Fixed and (2) Adjustable Shelves; Lockable Upper and Lower Double Doors; SEFA and MAS Certified Green. Made in USA.
Instructions:
All unexposed woods to be select kiln dried hardwood.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
All casegoods to be commercial quality.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Purchasing agent to verify ship to address and lead times prior to procurement•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-02Page 1
Exhibit E-FF&E Package
E-25
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Tool Storage Unit
Item Number: CG-02
Item Quantity: 1 ea
Manufacturer: Tiger Supplies Inc. Source: Tiger Supplies Inc.
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-02Page 2
Exhibit E-FF&E Package
E-26
21
Area Qty(s): 9: 1 • 6: 2
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: End Table
Item Number: CG-06
Item Quantity: 3 ea
Manufacturer: Simply Modern Furniture/AFA Stores Source: Simply Modern Furniture/AFA Stores
Revision(s):
Contact:
Phone:
Fax:
Address: 837 Jersey Avenue Suite 5mJersey City NJ 07310-
Address: 837 Jersey Avenue Suite 5mJersey City NJ 07310-
Contact:
E-mail:E-mail:
800# : (888) 287-6133 800#: (888) 287-6133
Web: www.simplymodernfurniture.comWeb: www.simplymodernfurniture.com
Phone:
Fax:
Description: Round Wood Table Cocktail Table with Metal Base
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03
Finish: Walnut
Dimensions: 24" dia x 22" h
Model Name: Artesia Round Cocktail Table
Top Mat'l/Finish: Walnut
Base Mat'l/Finish: Nickel
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All unexposed woods to be select kiln dried hardwood.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-06Page 1
Exhibit E-FF&E Package
E-27
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: End Table
Item Number: CG-06
Item Quantity: 3 ea
Manufacturer: Simply Modern Furniture/AFA Stores Source: Simply Modern Furniture/AFA Stores
Instructions:
All casegoods to be commercial quality.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit all shop drawings, finish samples, and other manufacturing information to designer for approval prior to fabrication.
•
All electrical components to be UL listed.•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Purchasing agent to verify ship to address and lead times prior to procurement•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-06Page 2
Exhibit E-FF&E Package
E-28
21
Area Qty(s): 12: 2
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Conference Table
Item Number: CG-09
Item Quantity: 2 ea
Manufacturer: Hertz Furniture Source: Hertz Furniture
Revision(s):
Contact:
Phone:
Fax:
Address: 170 Williams Dr.Ramsey NJ 07446-
Address: 170 Williams Dr.Ramsey NJ 07446-
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 526-4677 800#: (800) 526-4677
Web:Web:
Phone:
Fax:
Description: Boat Shape Conference Table
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: MCN-8442
Edge Detail: Flat, Eased
Dimensions: 84" L x 42" W x 29.5" H
Model Name: Safco Venner Boat Conference Table
Top Mat'l/Finish: Sierra Cherry Wood Veneer
Base Mat'l/Finish: Sierra Cherry Wood Veneer
Notes: Technology-Friendly:Built-in cable management panel on the boat-shaped tables features flush, removable steel cover.Attractive: Beautiful AA-grade select North American Hardwood veneers sport a beveled edge for added style.Protected: Finish covered by two coats of catalyzed lacquer.
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
All casegoods to be commercial quality.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
All electrical components to be UL listed.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-09Page 1
Exhibit E-FF&E Package
E-29
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Conference Table
Item Number: CG-09
Item Quantity: 2 ea
Manufacturer: Hertz Furniture Source: Hertz Furniture
Instructions:
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Purchasing agent to verify ship to address and lead times prior to procurement•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-09Page 2
Exhibit E-FF&E Package
E-30
21
Area Qty(s): 7: 1
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Parent End Table
Item Number: CG-10
Item Quantity: 1 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Revision(s):
Contact:
Phone:
Fax:
Address: 770 S. 70th StMilwaukee WI
Address:Denver CO
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 558-1010
Web:Web: www.nationalbusinessfurniture.com
Mobile: (720) 545-4050
Phone:
Fax:
Description: Square End Table with Trapazoid Base
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: 53196
Finish: Iron Gray Melamine Top with T Mold Edge Banding
Dimensions: 20" W x 20" D x 17"H
Model Name: Gauge End Table
Top Mat'l/Finish: Iron Gray
Base Mat'l/Finish: Silver Steel Legs
Notes: Assembly Required
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All unexposed woods to be select kiln dried hardwood.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-10Page 1
Exhibit E-FF&E Package
E-31
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Parent End Table
Item Number: CG-10
Item Quantity: 1 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Instructions:
All casegoods to be commercial quality.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit all shop drawings, finish samples, and other manufacturing information to designer for approval prior to fabrication.
•
All electrical components to be UL listed.•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Purchasing agent to verify ship to address and lead times prior to procurement•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-10Page 2
Exhibit E-FF&E Package
E-32
21
Area Qty(s): 3: 7 • 6: 1
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Cocktail Table
Item Number: CG-12
Item Quantity: 8 ea
Manufacturer: Simply Modern Furniture/AFA Stores Source: Simply Modern Furniture/AFA Stores
Revision(s):
Contact:
Phone:
Fax:
Address: 837 Jersey Avenue Suite 5mJersey City NJ 07310-
Address: 837 Jersey Avenue Suite 5mJersey City NJ 07310-
Contact:
E-mail:E-mail:
800# : (888) 287-6133 800#: (888) 287-6133
Web: www.simplymodernfurniture.comWeb: www.simplymodernfurniture.com
Phone:
Fax:
Description: Round Wood Table Cocktail Table with Metal Base
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03
Finish: Walnut
Dimensions: 40" dia x 16" h
Model Name: Artesia Round Cocktail Table
Top Mat'l/Finish: Walnut
Base Mat'l/Finish: Nickel
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All unexposed woods to be select kiln dried hardwood.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-12Page 1
Exhibit E-FF&E Package
E-33
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Cocktail Table
Item Number: CG-12
Item Quantity: 8 ea
Manufacturer: Simply Modern Furniture/AFA Stores Source: Simply Modern Furniture/AFA Stores
Instructions:
All casegoods to be commercial quality.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit all shop drawings, finish samples, and other manufacturing information to designer for approval prior to fabrication.
•
All electrical components to be UL listed.•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Purchasing agent to verify ship to address and lead times prior to procurement•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-12Page 2
Exhibit E-FF&E Package
E-34
21
Area Qty(s): 12: 1
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Large Conference Table
Item Number: CG-13
Item Quantity: 1 ea
Manufacturer: Hertz Furniture Source: Hertz Furniture
Revision(s):
Contact:
Phone:
Fax:
Address: 170 Williams Dr.Ramsey NJ 07446-
Address: 170 Williams Dr.Ramsey NJ 07446-
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 526-4677 800#: (800) 526-4677
Web:Web:
Phone:
Fax:
Description: Boat Shape Conference Table
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: MCN-9642
Edge Detail: Flat, Eased
Dimensions: 96" L x 42" W x 29.5" H
Model Name: Safco Venner Boat Conference Table
Top Mat'l/Finish: Sierra Cherry Wood Veneer
Base Mat'l/Finish: Sierra Cherry Wood Veneer
Notes: Technology-Friendly:Built-in cable management panel on the boat-shaped tables features flush, removable steel cover.Attractive: Beautiful AA-grade select North American Hardwood veneers sport a beveled edge for added style.Protected: Finish covered by two coats of catalyzed lacquer.
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All unexposed woods to be select kiln dried hardwood.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-13Page 1
Exhibit E-FF&E Package
E-35
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Large Conference Table
Item Number: CG-13
Item Quantity: 1 ea
Manufacturer: Hertz Furniture Source: Hertz Furniture
Instructions:
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
All casegoods to be commercial quality.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit all shop drawings, finish samples, and other manufacturing information to designer for approval prior to fabrication.
•
All electrical components to be UL listed.•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Purchasing agent to verify ship to address and lead times prior to procurement•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-13Page 2
Exhibit E-FF&E Package
E-36
21
Area Qty(s): 5: 40
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Round Banquet Table
Item Number: CG-14
Item Quantity: 40 ea
Manufacturer: Mitylite Corporate Source: Mitylite Corporate
Revision(s):
Contact:
Phone:
Fax:
Address: 1301 West 400 NorthOrem UT
Address: 1301 West 400 NorthOrem UT
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 909-8034 800#: (800) 909-8034
Web:Web:
Phone:
Fax:
Description: Folding Round Banquet Table with Wood Laminate Top
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03
Finish: Columbian Walnut Laminate
Model Name: Reveal Seamless Banquet Table
Top Mat'l/Finish: Columbian Walnut Laminate
Base Mat'l/Finish: Black Sand Metal Powdercoat
Width: 72"
Height: 30"
Depth: 72"
Notes: FEATURESTable Top: Cleans easy with a seamless top
Sizes: Available in ALL sizes up to 72” diameter
Surface: Attractive linenless design with laminate surface and matching edge
Durability: Exceptionally durable with ultralight plywood top
Legs: Easy to store and setup with aluminum 2” x 2” post legs that fold compactly within frame
Storage: Features patented snap-lock folding legs for safe and easy storage without extra clips or parts
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All unexposed woods to be select kiln dried hardwood.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-14Page 1
Exhibit E-FF&E Package
E-37
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Round Banquet Table
Item Number: CG-14
Item Quantity: 40 ea
Manufacturer: Mitylite Corporate Source: Mitylite Corporate
Instructions:
All stress joints to be corner blocked, glued, double dowelled and screwed.•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
All casegoods to be commercial quality.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit all shop drawings, finish samples, and other manufacturing information to designer for approval prior to fabrication.
•
All electrical components to be UL listed.•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Purchasing agent to verify ship to address and lead times prior to procurement•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-14Page 2
Exhibit E-FF&E Package
E-38
21
Area Qty(s): 14: 17
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Folding Table
Item Number: CG-15
Item Quantity: 17 ea
Manufacturer: Global Industrial Source: Global Industrial
Revision(s):
Contact:
Phone: (888) 978-7759
Fax:
Address: 11 Harbor Park DrivePort Washington NY 11050-
Address: 11 Harbor Park DrivePort Washington NY 11050-
Contact:
E-mail:E-mail:
Web: https://www.globalindustrial.com/contactUsWeb: https://www.globalindustrial.com/contactUs
Phone: (888) 978-7759
Fax:
Description: Rectangular Plastic Folding Table
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: T9AB1134143
Finish: Platinum Plastic
Model Name: Plastic Folding Table
Top Mat'l/Finish: Metal Powder Coat: Charcoal
Base Mat'l/Finish: Heavy Gauge Steel
Width: 60"
Height: 30"
Depth: 30"
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All unexposed woods to be select kiln dried hardwood.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-15Page 1
Exhibit E-FF&E Package
E-39
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Folding Table
Item Number: CG-15
Item Quantity: 17 ea
Manufacturer: Global Industrial Source: Global Industrial
Instructions:
All casegoods to be commercial quality.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit all shop drawings, finish samples, and other manufacturing information to designer for approval prior to fabrication.
•
All electrical components to be UL listed.•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Purchasing agent to verify ship to address and lead times prior to procurement•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-15Page 2
Exhibit E-FF&E Package
E-40
21
Area Qty(s): 15: 1 • 13: 1
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Desk
Item Number: CG-16
Item Quantity: 2 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Revision(s):
Contact:
Phone:
Fax:
Address: 770 S. 70th StMilwaukee WI
Address:Denver CO
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 558-1010
Web:Web: www.nationalbusinessfurniture.com
Mobile: (720) 545-4050
Phone:
Fax:
Description: Bowfront Computer Desk with 2 Side Pedestals
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Four Drawers and Two File Cabinets.
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: 15980
Finish: Slate and Sandstone
Direction of Grain: Per Mfr
Hardware Style: Per Mfr
Hardware Finish: Per Mfr
Hardware Size: Per Mfr
Model Name: Bestar Office Furniture Connexion Shell Desk
Top Mat'l/Finish: Melamine
Base Mat'l/Finish: Melamine
Width: 72"
Height: 30.5"
Depth: 30"
Notes: Includes Durable, 1" thick surfaces covered by melamine resist scratches, stains and burns, and have tough PVC edgesDrawers open smoothly on ball bearing glides (file drawers hold both letter and legal folders), one lock secures drawersWire management grommets keep cables neat and orderlyANSI/BIFMA safety approvedAssembly required
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-16Page 1
Exhibit E-FF&E Package
E-41
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Desk
Item Number: CG-16
Item Quantity: 2 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Instructions:
All unexposed woods to be select kiln dried hardwood.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
All casegoods to be commercial quality.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit all shop drawings, finish samples, and other manufacturing information to designer for approval prior to fabrication.
•
All electrical components to be UL listed.•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Purchasing agent to verify ship to address and lead times prior to procurement•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-16Page 2
Exhibit E-FF&E Package
E-42
21
Area Qty(s): 2: 1
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Executive Desk System w/ Credenza
Item Number: CG-17
Item Quantity: 1 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Revision(s):
Contact:
Phone:
Fax:
Address: 770 S. 70th StMilwaukee WI
Address:Denver CO
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 558-1010
Web:Web: www.nationalbusinessfurniture.com
Mobile: (720) 545-4050
Phone:
Fax:
Description: Executive Office Grouping of L Return Desk and Matching Credenza
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: 15982
Finish: Slate/Sandstone
Direction of Grain: Per Mfr
Dimensions: Refer to Notes
Hardware Style: Per Mfr
Hardware Finish: Per Mfr
Hardware Size: Per Mfr
Executive Desk: 71.125" w x 29.75" d x 30.375" HBridge: 39.375" w x 19.75" d x 30.375"hCredenza: 71.125w x 23.375" d x 30. 375"hHutch for Credenza: 70.625" w x 13.375" d x 35.5" hOversize Pedestal: 33.875" w x 17.75" d x 29.375" hKeyboard: 26.375" w 14.75" d x 2.75" hLateral File: 30.75w x 15.625" k x 30.375" h635llbs
Model Name: Bestar Office Furiture Connexion Collection
Top Mat'l/Finish: Melamine
Base Mat'l/Finish: Melamine
Fabric Details
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All unexposed woods to be select kiln dried hardwood.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-17Page 1
Exhibit E-FF&E Package
E-43
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Executive Desk System w/ Credenza
Item Number: CG-17
Item Quantity: 1 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Instructions:
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
All casegoods to be commercial quality.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit all shop drawings, finish samples, and other manufacturing information to designer for approval prior to fabrication.
•
All electrical components to be UL listed.•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Purchasing agent to verify ship to address and lead times prior to procurement•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-17Page 2
Exhibit E-FF&E Package
E-44
21
Area Qty(s): 5: 4
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Rectangular Banquet Table
Item Number: CG-18
Item Quantity: 4 ea
Manufacturer: Mitylite Corporate Source: Mitylite Corporate
Revision(s):
Contact:
Phone:
Fax:
Address: 1301 West 400 NorthOrem UT
Address: 1301 West 400 NorthOrem UT
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 909-8034 800#: (800) 909-8034
Web:Web:
Phone:
Fax:
Description: Rectangular Banquet Table with Tilt Top
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03
Finish: Columbian Walnut Laminate
Model Name: Reveal Rectangular Banquet Table
Top Mat'l/Finish: Columbian Walnut Laminate
Base Mat'l/Finish: Black Sand Metal Powdercoat
Width: 72"
Height: 29"
Depth: 30"
Notes: FEATURESFrame: Powder Coated Aluminum
Table Top: Commercial-grade Laminate
Capacity: 1,000 lbs
Sustainability: GREENGUARD Certified
Warranty: 15 Year
3″ Locking Casters
Made in the USA
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All unexposed woods to be select kiln dried hardwood.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-18Page 1
Exhibit E-FF&E Package
E-45
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Rectangular Banquet Table
Item Number: CG-18
Item Quantity: 4 ea
Manufacturer: Mitylite Corporate Source: Mitylite Corporate
Instructions:
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
All casegoods to be commercial quality.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit all shop drawings, finish samples, and other manufacturing information to designer for approval prior to fabrication.
•
All electrical components to be UL listed.•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Purchasing agent to verify ship to address and lead times prior to procurement•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-18Page 2
Exhibit E-FF&E Package
E-46
21
Area Qty(s): 1: 1
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Collaboration Table
Item Number: CG-20
Item Quantity: 1 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Revision(s):
Contact:
Phone:
Fax:
Address: 770 S. 70th StMilwaukee WI
Address:Denver CO
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 558-1010
Web:Web: www.nationalbusinessfurniture.com
Mobile: (720) 545-4050
Phone:
Fax:
Description: Round Collaboration Table
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: 44230
Finish: Grey Nebula
Dimensions: 42"Dia x 30"H
Model Name: Premier Furniture Lunchroom Series Table
Top Mat'l/Finish: Grey Nebula Laminate
Base Mat'l/Finish: Black Powder Coat
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All unexposed woods to be select kiln dried hardwood.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-20Page 1
Exhibit E-FF&E Package
E-47
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Collaboration Table
Item Number: CG-20
Item Quantity: 1 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Instructions:
All casegoods to be commercial quality.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit all shop drawings, finish samples, and other manufacturing information to designer for approval prior to fabrication.
•
All electrical components to be UL listed.•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Purchasing agent to verify ship to address and lead times prior to procurement•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-20Page 2
Exhibit E-FF&E Package
E-48
21
Area Qty(s): 10: 1
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: End Table
Item Number: CG-21
Item Quantity: 1 ea
Manufacturer: Dor-Val Source: Dor-Val
Revision(s):
Contact: Customer Service
Phone: (514) 336-7780
Fax: (514) 745-2640
Address: 11800 Boul. LaurentienSaint-Laurent Quebec H4K 2E1 Canada
Address: 11800 Boul. LaurentienSaint-Laurent Quebec H4K 2E1 Canada
Contact: Customer Service
E-mail: [email protected]: [email protected]
800# : (800) 561-7780 800#: (800) 561-7780
Web: http://www.dor-val.com/Web: http://www.dor-val.com/
Phone: (514) 336-7780
Fax: (514) 745-2640
Description: Wood Circulare End Table with 4 Legs
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: TTHC
Finish: Columbian Walnut
Wood Species: White Oak
Dimensions: 24"Dia x 21" h
Model Name: Rounded End Table
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All unexposed woods to be select kiln dried hardwood.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-21Page 1
Exhibit E-FF&E Package
E-49
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: End Table
Item Number: CG-21
Item Quantity: 1 ea
Manufacturer: Dor-Val Source: Dor-Val
Instructions:
All casegoods to be commercial quality.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit all shop drawings, finish samples, and other manufacturing information to designer for approval prior to fabrication.
•
All electrical components to be UL listed.•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Purchasing agent to verify ship to address and lead times prior to procurement•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-21Page 2
Exhibit E-FF&E Package
E-50
21
Area Qty(s): 10: 8
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Square Activity/Game Table
Item Number: CG-23
Item Quantity: 8 ea
Manufacturer: Dor-Val Source: Dor-Val
Revision(s):
Contact: Customer Service
Phone: (514) 336-7780
Fax: (514) 745-2640
Address: 11800 Boul. LaurentienSaint-Laurent Quebec H4K 2E1 Canada
Address: 11800 Boul. LaurentienSaint-Laurent Quebec H4K 2E1 Canada
Contact: Customer Service
E-mail: [email protected]: [email protected]
800# : (800) 561-7780 800#: (800) 561-7780
Web: http://www.dor-val.com/Web: http://www.dor-val.com/
Phone: (514) 336-7780
Fax: (514) 745-2640
Description: Activity Table w/ Fold Away Panels
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03
Edge Detail: Flat w/ T-Mould
Dimensions: 36" x 36" x 1.25"Th; 51"Dia.
Model Name: Club Table
Top Mat'l/Finish: (YWHC) Top; Laminate: Pecan
Base Mat'l/Finish: (MRHC) Base; Black Powder Coat Metal
Notes: Table Top Features: "Slide-Safe" Folding Mechanism; Aluminum Sliding Bolt w/ Plastic Cover that Doubles as a Support for the Leaf When Folded Underneath the Top. Table Base Features: Base Plate is Made of 3/8" Th. Steel Plating; Table Shox Self Adjusting Glide; Base Plate Sits 1.5" From Floor; 3"Dia. Column.
Assembly Required.
Instructions:
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
All casegoods to be commercial quality.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Purchasing agent to verify ship to address and lead times prior to procurement•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
CG-23Page 1
Exhibit E-FF&E Package
E-51
21
Area Qty(s): 5: 4 • 14: 2
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Chair Truck
Item Number: MS-07
Item Quantity: 6 ea
Manufacturer: MTS Seating Source: Carol Hughes
Revision(s):
Contact: Carol Hughes
Phone: 303-744-3200
Fax: 303-744-3203
Address: 1244 West DeanTemperance MI 48182
Address: 595 South Broadway, Suite 103WDenver CO 80209
Contact: Charles Eisen & Associates
E-mail:E-mail:
Web:Web: www.mtsseating.com
Phone: 313-847-3875
Fax: 313-847-0993
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: Heavy Duty five Wheel Hand TruckCapacity 12 Chairs
Dimensions: 18"w x 53.5" d x 60"h
Color/Finish: Black
Model Number: 015
Model Name: Hand Truck
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
MS-07Page 1
Exhibit E-FF&E Package
E-52
21
Area Qty(s): 5: 4 • 14: 2
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Table Truck
Item Number: MS-08
Item Quantity: 6 ea
Manufacturer: MTS Seating Source: Carol Hughes
Revision(s):
Contact: Carol Hughes
Phone: 303-744-3200
Fax: 303-744-3203
Address: 1244 West DeanTemperance MI 48182
Address: 595 South Broadway, Suite 103WDenver CO 80209
Contact: Charles Eisen & Associates
E-mail:E-mail:
Web:Web: www.mtsseating.com
Phone: 313-847-3875
Fax: 313-847-0993
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: Heavy Duty Table Cart with Swivel Wheels and BrakesHolds 7 Tables
Dimensions: 32"W x 65"D x 44"H
Color/Finish:
Model Number: 030-RT
Model Name: folding Table Storage Cart
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All unexposed woods to be select kiln dried hardwood.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Purchasing agent to notify designer of any changes to specification, manufacturer, etx. All changes must be approved by designer in writing.
•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Purchasing agent to verify all quantities prior to procurement. Designer not responsible for quantities or takeoffs.•
All casegoods to be commercial quality.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
MS-08Page 1
Exhibit E-FF&E Package
E-53
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Table Truck
Item Number: MS-08
Item Quantity: 6 ea
Manufacturer: MTS Seating Source: Carol Hughes
Instructions:
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit all shop drawings, finish samples, and other manufacturing information to designer for approval prior to fabrication.
•
All electrical components to be UL listed.•
All table bases, occasional furniture, dining chairs, and upholstered seating to have nylon glides.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Purchasing agent to verify ship to address and lead times prior to procurement•
Manufacturer to seal marble, stone, and wood tops with protective sealant such as Tuff Skin•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
MS-08Page 2
Exhibit E-FF&E Package
E-54
21
Area Qty(s): 14: 2
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Power Tower
Item Number: MS-09
Item Quantity: 2 ea
Manufacturer: Mooreco | Vanerum North America Source: Mooreco | Vanerum North America
Revision(s):
Contact: Customer Service
Phone:
Fax: (866) 888-7483
Address: 2885 Lorraine Ave.Temple TX 76501-
Address: 2885 Lorraine Ave.Temple TX 76501-
Contact: Customer Service
E-mail:E-mail:
800# : (800) 749-2258 800#: (800) 749-2258
Web: www.moorecoinc.comWeb: www.moorecoinc.com
Phone:
Fax: (866) 888-7483
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: SJB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: Multi-User Mobile Charging & Power Center.Provides instant AC outlet and USB charging access to multiple users in group seating arrangements. Easily mobile on four dual-wheel casters (two locking). Durable powder-coated steel frame includes a cord winder for the 13.5' power cable.
Dimensions: 17.5"W x 17.5"D x 40"H
Notes: Above Pricing is for Budgetary Allowances Only. Final Price Dependent Upon Retail/Dealership.
Color/Finish: Silver
Model Number: 27735
Model Name: MoorePower Tower
Instructions:
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
MS-09Page 1
Exhibit E-FF&E Package
E-55
21
Area Qty(s): 3: 1
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Sofa - Left Hand
Item Number: RCP-09L
Item Quantity: 1 ea
Manufacturer: Decca Contract Source: Design Theory, LLC
Revision(s):
Contact: Tye Hindle
Phone: (303) 324-9975
Fax:
Address: 2100 Summer St. NESuite 100Minneapolis MN 55413-
Address: 2535 Walnut StreetSuite A1Denver CO 80205-
Contact: Customer Service
E-mail: [email protected]: [email protected]
Web: https://www.designtheoryllc.com/Web: www.deccacontract.com
Phone: (612) 362-0007
Fax: (612) 362-0014
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: SJB
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Description: Upholstered Sofa w/ Stained Legs
Dimensions: 116"W x 29"D x 26.5"H
Notes: "Left Hand" Denotes the Location of the Chaise Portion When Facing the Sofa.
Color/Finish:
Model Number: VT-TS510UL
Model Name: Avant Long Angled Sofa
Instructions:
All stress joints to be corner blocked, glued, double dowelled and screwed.•
All unexposed woods to be select kiln dried hardwood.•
Urethane foam cushions shall meet California Technical Bulletin TB-117. CMHR foam or equal to be wrapped with two layers of 8oz sewn dacron and cased in muslin.
•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
All table bases, cocktail and end tables, dining chairs, and upholstered seating to have nylon glides•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
RCP-09LPage 1
Exhibit E-FF&E Package
E-56
21
Area Qty(s): 9: 5
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Bench
Item Number: SG-02
Item Quantity: 5 ea
Manufacturer: Global Industrial Source: Global Industrial
Revision(s):
Contact:
Phone: (888) 978-7759
Fax:
Address: 11 Harbor Park DrivePort Washington NY 11050-
Address: 11 Harbor Park DrivePort Washington NY 11050-
Contact:
E-mail:E-mail:
Web: https://www.globalindustrial.com/contactUsWeb: https://www.globalindustrial.com/contactUs
Phone: (888) 978-7759
Fax:
Description: Solid Phenolic Bench with Steel Trapazoid Base
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: WBB491435 (1) /WBB490841 (2)
Material/Finish: Blue Phenolic Top/ Stainless Steel Base
Seat Height: 18"
Seat Depth: 12"
Width: 72"
Depth: 12"
Notes: Order 2 bases for each top
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
All unexposed woods to be select kiln dried hardwood.•
Manufacturer to provide security hooks at all loose cushions.•
Urethane foam cushions shall meet California Technical Bulletin TB-117. CMHR foam or equal to be wrapped with two layers of 8oz sewn dacron and cased in muslin.
•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Provide extra high crown across all seats.•
All table bases, cocktail and end tables, dining chairs, and upholstered seating to have nylon glides•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-02Page 1
Exhibit E-FF&E Package
E-57
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Bench
Item Number: SG-02
Item Quantity: 5 ea
Manufacturer: Global Industrial Source: Global Industrial
Instructions:
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-02Page 2
Exhibit E-FF&E Package
E-58
21
Area Qty(s): 6: 1
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Lounge Chair
Item Number: SG-03
Item Quantity: 1 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Revision(s):
Contact:
Phone:
Fax:
Address: 770 S. 70th StMilwaukee WI
Address:Denver CO
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 558-1010
Web:Web: www.nationalbusinessfurniture.com
Mobile: (720) 545-4050
Phone:
Fax:
Description: Fully Upholstered Lounge Chair with Angle Arms
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: 76209
Material/Finish: Ash Wood Finish/Black Vinyl Upholstery
Dimensions: 32"W x 33.5"D x 30.75"H
Model Name: Edge Collection
Seat Height: 17.5"
Seat Depth: 20"
Arm Height: 27"
Seat Cushion Style: Tight
Back Cushion Style: Tight
Cushion Content: Must Meet Local, State and Federal Fire and Flammability Codes for Commercial Installations.
Instructions:
Urethane foam cushions shall meet California Technical Bulletin TB-117. CMHR foam or equal to be wrapped with two layers of 8oz sewn dacron and cased in muslin.
•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
All table bases, cocktail and end tables, dining chairs, and upholstered seating to have nylon glides•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-03Page 1
Exhibit E-FF&E Package
E-59
21
Area Qty(s): 6: 1
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Sofa
Item Number: SG-04
Item Quantity: 1 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Revision(s):
Contact:
Phone:
Fax:
Address: 770 S. 70th StMilwaukee WI
Address:Denver CO
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 558-1010
Web:Web: www.nationalbusinessfurniture.com
Mobile: (720) 545-4050
Phone:
Fax:
Description: Fully Upholstered Loveseat with Angular Arms
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: 76210
Material/Finish: Ash Legs/Black Vinyl Upholstery
Model Name: Edge Collection Sofa
Seat Height: 17.5"
Seat Depth: 20"
Arm Height: 27"
Seat Cushion Style: Tight
Back Cushion Style: Tight
Cushion Content: CAL17 Medium Density w/ Dacron Wrap
Width: 74.5"
Height: 5"
Depth: 33.5"
Notes: Assembly Required
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
All unexposed woods to be select kiln dried hardwood.•
Manufacturer to provide security hooks at all loose cushions.•
Urethane foam cushions shall meet California Technical Bulletin TB-117. CMHR foam or equal to be wrapped with two layers of 8oz sewn dacron and cased in muslin.
•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Provide extra high crown across all seats.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-04Page 1
Exhibit E-FF&E Package
E-60
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Sofa
Item Number: SG-04
Item Quantity: 1 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Instructions:
All table bases, cocktail and end tables, dining chairs, and upholstered seating to have nylon glides•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-04Page 2
Exhibit E-FF&E Package
E-61
21
Area Qty(s): 12: 16
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Conference Chair
Item Number: SG-06
Item Quantity: 16 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Revision(s):
Contact:
Phone:
Fax:
Address: 770 S. 70th StMilwaukee WI
Address:Denver CO
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 558-1010
Web:Web: www.nationalbusinessfurniture.com
Mobile: (720) 545-4050
Phone:
Fax:
Description: Faux Leather Mid Back Conference Chair
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: 51789
Material/Finish: Stratus Vinyl/ Chrome Base
Model Name: Hadley Mid Back
Seat Height: 19.125"-22.875"
Seat Depth: 19.625"
Seat Cushion Style: Tight
Back Cushion Style: Tight
Cushion Content: CAL17 Medium Density w/ Dacron Wrap
Width: 27,5"
Height: 40.125"-48.875"
Depth: 29.5"
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
All unexposed woods to be select kiln dried hardwood.•
Manufacturer to provide security hooks at all loose cushions.•
Urethane foam cushions shall meet California Technical Bulletin TB-117. CMHR foam or equal to be wrapped with two layers of 8oz sewn dacron and cased in muslin.
•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Provide extra high crown across all seats.•
All table bases, cocktail and end tables, dining chairs, and upholstered seating to have nylon glides•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-06Page 1
Exhibit E-FF&E Package
E-62
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Conference Chair
Item Number: SG-06
Item Quantity: 16 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Instructions:
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-06Page 2
Exhibit E-FF&E Package
E-63
21
Area Qty(s): 7: 1
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Parent Bench/Shoe Cubbie
Item Number: SG-07
Item Quantity: 1 ea
Manufacturer: Wayfair Source: Wayfair
Revision(s):
Contact: Kayla Cyrs
Phone:
Fax:
Address: 4 Copley Place7th FloorBoston MA 02116-
Address: 4 Copley Place7th FloorBoston MA 02116-
Contact: Kayla Cyrs
E-mail: [email protected]: [email protected]
800# : (857) 559-4451 800#: (857) 559-4451
Web: www.wayfair.comWeb: www.wayfair.com
Phone:
Fax:
Description: Cubbie Shoe Cabinet with Storage Bench and Cushion
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: Red Barrel Studio RDBT7060
Material/Finish: Gray Wood
Model Name: 10 Pair Shoe Storage Bench
Seat Height: 22"
Seat Depth: 12"
Seat Cushion Style: Loose Soft Cushion
Back Cushion Style:
Cushion Content: Gray Linen included
Width: 47.25"
Height: 22"
Depth: 12"
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
All unexposed woods to be select kiln dried hardwood.•
Manufacturer to provide security hooks at all loose cushions.•
Urethane foam cushions shall meet California Technical Bulletin TB-117. CMHR foam or equal to be wrapped with two layers of 8oz sewn dacron and cased in muslin.
•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Provide extra high crown across all seats.•
All table bases, cocktail and end tables, dining chairs, and upholstered seating to have nylon glides•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-07Page 1
Exhibit E-FF&E Package
E-64
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Parent Bench/Shoe Cubbie
Item Number: SG-07
Item Quantity: 1 ea
Manufacturer: Wayfair Source: Wayfair
Instructions:
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-07Page 2
Exhibit E-FF&E Package
E-65
21
Area Qty(s): 7: 2
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Parent Chair
Item Number: SG-08
Item Quantity: 2 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Revision(s):
Contact:
Phone:
Fax:
Address: 770 S. 70th StMilwaukee WI
Address:Denver CO
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 558-1010
Web:Web: www.nationalbusinessfurniture.com
Mobile: (720) 545-4050
Phone:
Fax:
Description: Compass Oversized Guest Chair with Arms
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: 76522
Material/Finish: Silver Metal Legs
Dimensions: 30.75" w x 26.375" D x 33.625"H
Model Name: Compass Collection
Seat Cushion Style: Tight
Back Cushion Style: Tight
Includes Inline Upholstery: Williamsburg Solid Polyurethane Seat and Back
Notes: Features:Polyurethane upholstery with option of fabric backrest, powder-coated steel frame450 lb Weight capacityPolyurethane arm capsWall-saver design means the back cushion will not rub against the wallFully visible clean-out area at back of seatAssembly required
Fabric Details
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
All unexposed woods to be select kiln dried hardwood.•
Manufacturer to provide security hooks at all loose cushions.•
Urethane foam cushions shall meet California Technical Bulletin TB-117. CMHR foam or equal to be wrapped with two layers of 8oz sewn dacron and cased in muslin.
•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-08Page 1
Exhibit E-FF&E Package
E-66
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Parent Chair
Item Number: SG-08
Item Quantity: 2 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Instructions:
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Provide extra high crown across all seats.•
All table bases, cocktail and end tables, dining chairs, and upholstered seating to have nylon glides•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-08Page 2
Exhibit E-FF&E Package
E-67
21
Area Qty(s): 3: 1
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Sofa - Right Hand
Item Number: SG-09R
Item Quantity: 1 ea
Manufacturer: Decca Contract Source: Design Theory, LLC
Revision(s):
Contact: Tye Hindle
Phone: (303) 324-9975
Fax:
Address: 2100 Summer St. NESuite 100Minneapolis MN 55413-
Address: 2535 Walnut StreetSuite A1Denver CO 80205-
Contact: Customer Service
E-mail: [email protected]: [email protected]
Web: https://www.designtheoryllc.com/Web: www.deccacontract.com
Phone: (612) 362-0007
Fax: (612) 362-0014
Description: Upholstered Sofa w/ Stained Legs
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: SJB
Right Hand Chaise
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: VT-TS510UR
Material/Finish: ----
Dimensions: 116"W x 29"D x 26.5"H
Model Name: Avant Long Angled Sofa
Seat Height: 16"
Seat Depth: 20"
Seat Cushion Style: Tight
Back Cushion Style: Tight
Cushion Content: Must Meet Local, State and Federal Fire and Flammability Codes for Commercial Installations.
seat: SGF-09.2; Arc Com; Pattern: AC-63533; Insight; Denim #14; 100% Polyester/100% Phthalate Free Vinyl Face; Repeat: NA; Width: 54"; Railroad: No; Fire Rating: CA 117 2013, NFPA 260, UFAC - Class 1; Durability: 300,000 Dbl Rubs; 4.5 yds ea.; back: SGF-09.1; DesignTex; Pattern: 3922-101; Angles; Slate; 73% Acrylic, 27% polyester; Repeat: 28" v , 28" h; Width: 54"; Railroad: No; Finish: Stain Repellent; Fire Rating: CAL TB 117-2013, UFAC Class 1, NFPA 260, FMVSS 302, IMO 8.2; Durability: 100,000; 8 yds ea.
Notes: "Right Hand" Denotes the Location of the Chaise Portion When Facing the Sofa.
COM/COL:
Instructions:
All stress joints to be corner blocked, glued, double dowelled and screwed.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-09RPage 1
Exhibit E-FF&E Package
E-68
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Sofa - Right Hand
Item Number: SG-09R
Item Quantity: 1 ea
Manufacturer: Decca Contract Source: Design Theory, LLC
Instructions:
All unexposed woods to be select kiln dried hardwood.•
Urethane foam cushions shall meet California Technical Bulletin TB-117. CMHR foam or equal to be wrapped with two layers of 8oz sewn dacron and cased in muslin.
•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
All table bases, cocktail and end tables, dining chairs, and upholstered seating to have nylon glides•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-09RPage 2
Exhibit E-FF&E Package
E-69
21
Area Qty(s): 3: 8 • 9: 2
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Flair Lounge Chair
Item Number: SG-10
Item Quantity: 10 ea
Manufacturer: Decca Contract Source: Design Theory, LLC
Revision(s):
Contact: Tye Hindle
Phone: (303) 324-9975
Fax:
Address: 2100 Summer St. NESuite 100Minneapolis MN 55413-
Address: 2535 Walnut StreetSuite A1Denver CO 80205-
Contact: Customer Service
E-mail: [email protected]: [email protected]
Web: https://www.designtheoryllc.com/Web: www.deccacontract.com
Phone: (612) 362-0007
Fax: (612) 362-0014
Description: Modern Flair Lounge Chair with Swivel Base
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Four Star Base Auto Return
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: FC-TC320
Material/Finish: Brushed Stainless Steel
Dimensions:
Model Name: Bing High Bach Chair
Seat Height: 16"
Seat Depth: 20"
Arm Height: 20"
Seat Cushion Style: Attached
Back Cushion Style: Attached
Cushion Content: 1.8 High Resilient Foam Core Wrapped in Two Layers of Plush Foam and One Layer of 1oz Fiber
All: SGF-10; No Manufacturer; Pattern: AC-63533; Insight; Denim #14; 100% Polyester/100% Phthalate Free Vinyl Face; Repeat: NA; Width: 54"; Railroad: No; Fire Rating: CA 117 2013, NFPA 260, UFAC - Class 1; Durability: 300,000 Dbl Rubs; 5.5 yds ea.
Width: 37"
Height: 41.5"
Depth: 33"
COM/COL:
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
All unexposed woods to be select kiln dried hardwood.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-10Page 1
Exhibit E-FF&E Package
E-70
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Flair Lounge Chair
Item Number: SG-10
Item Quantity: 10 ea
Manufacturer: Decca Contract Source: Design Theory, LLC
Instructions:
Manufacturer to provide security hooks at all loose cushions.•
Urethane foam cushions shall meet California Technical Bulletin TB-117. CMHR foam or equal to be wrapped with two layers of 8oz sewn dacron and cased in muslin.
•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Provide extra high crown across all seats.•
All table bases, cocktail and end tables, dining chairs, and upholstered seating to have nylon glides•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-10Page 2
Exhibit E-FF&E Package
E-71
21
Area Qty(s): 5: 400
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Banquet Chair
Item Number: SG-11
Item Quantity: 400 ea
Manufacturer: MTS Seating Source: Charles Eisen & Associates
Revision(s):
Contact: Carrie Leonard; [email protected]
Phone: 303-744-3200
Fax: 303-744-3203
Address: 1244 West DeanTemperance MI 48182
Address: 595 South Broadway, Suite 103WDenver CO 80209
Contact: Charles Eisen & Associates
E-mail:E-mail:
Web:Web: www.mtsseating.com
Phone: 313-847-3875
Fax: 313-847-0993
Description: Stacking Banquet Chair
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: 584
Material/Finish: Velvet Touch V-4 Midnight Powdercoat
Dimensions: 18"W x 22.5"D x 36.5"H
Model Name: Omega Stackers II
Seat Height: ----
Seat Depth: ---
Seat Cushion Style: Tight
Back Cushion Style: Tight
Cushion Content: Must Meet Local, State and Federal Fire and Flammability Codes for Commercial Installations.
MTS grade 4 upholstery, Style: Baron II, Color: Beige BRN 309
Notes: Features: High Strength Steel Frame; Nylon Swivel Floor Glides, Hand Hold; Stacks 10 High; 2" Waterfall Seat w/ COMFORTbliss Padding; Stack Bars.
Fabric Details
Instructions:
Urethane foam cushions shall meet California Technical Bulletin TB-117. CMHR foam or equal to be wrapped with two layers of 8oz sewn dacron and cased in muslin.
•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
All table bases, cocktail and end tables, dining chairs, and upholstered seating to have nylon glides•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-11Page 1
Exhibit E-FF&E Package
E-72
21
Area Qty(s): 1: 3 • 2: 1 • 13: 2
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Side Guest Chair
Item Number: SG-13
Item Quantity: 6 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Revision(s):
Contact:
Phone:
Fax:
Address: 770 S. 70th StMilwaukee WI
Address:Denver CO
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 558-1010
Web:Web: www.nationalbusinessfurniture.com
Mobile: (720) 545-4050
Phone:
Fax:
Description: Armless Stackable Guest Chair
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: 76018
Material/Finish: Navy Upholstery/ Natural Wood Back/Gray Metal Frame
Model Name: KFI 1300 Series
Seat Height: 17.5"
Seat Depth: 17.5"
Seat Cushion Style: Tight
Cushion Content: hie
Width: 19"
Height: 1.5"
Depth: 18.5"
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
All unexposed woods to be select kiln dried hardwood.•
Manufacturer to provide security hooks at all loose cushions.•
Urethane foam cushions shall meet California Technical Bulletin TB-117. CMHR foam or equal to be wrapped with two layers of 8oz sewn dacron and cased in muslin.
•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Provide extra high crown across all seats.•
All table bases, cocktail and end tables, dining chairs, and upholstered seating to have nylon glides•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-13Page 1
Exhibit E-FF&E Package
E-73
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Side Guest Chair
Item Number: SG-13
Item Quantity: 6 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Instructions:
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-13Page 2
Exhibit E-FF&E Package
E-74
21
Area Qty(s): 14: 40
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Folding Chair
Item Number: SG-15
Item Quantity: 40 ea
Manufacturer: Dor-Val Source: Dor-Val
Revision(s):
Contact: Customer Service
Phone: (514) 336-7780
Fax: (514) 745-2640
Address: 11800 Boul. LaurentienSaint-Laurent Quebec H4K 2E1 Canada
Address: 11800 Boul. LaurentienSaint-Laurent Quebec H4K 2E1 Canada
Contact: Customer Service
E-mail: [email protected]: [email protected]
800# : (800) 561-7780 800#: (800) 561-7780
Web: http://www.dor-val.com/Web: http://www.dor-val.com/
Phone: (514) 336-7780
Fax: (514) 745-2640
Description: Heavy Duty Plastic Folding Chair
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: 365PL
Material/Finish: Off White Seat and Back; Silver Powder Coated Frame
Dimensions: 15"W x 16"D
Seat Height: ---
Seat Depth: ---
Notes: Features: High Quality Blow Molded Folding Chair; Contoured Seat w/ Liquid Channel; Deeply Curved Back w/ Hand Hold; 18 Gauge, 1-1/8"Dia. Steel Tube w/ (2) Cross Bars for Strength; Slightly Textured Seat and Textured Silver Vein Powder Coated Frame.
Instructions:
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
All table bases, cocktail and end tables, dining chairs, and upholstered seating to have nylon glides•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-15Page 1
Exhibit E-FF&E Package
E-75
21
Area Qty(s): 1: 5 • 13: 1 • 2: 1 • 15: 1
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Ergo Task Chair
Item Number: SG-18
Item Quantity: 8 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Revision(s):
Contact:
Phone:
Fax:
Address: 770 S. 70th StMilwaukee WI
Address:Denver CO
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 558-1010
Web:Web: www.nationalbusinessfurniture.com
Mobile: (720) 545-4050
Phone:
Fax:
Description: High Back Mesh Chair with Seat Slider
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: 56848
Material/Finish: Black
Dimensions:
Model Name: Office Star Proline Collection
Seat Height: 18,25"-22"
Seat Depth: 19.5"
Arm Height: Adjustable
Seat Cushion Style: Tight
Back Cushion Style: Mesh
Cushion Content: Commercial Grade
Width: 26.5"
Height: 38"-43.5"
Depth: 27"
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
All unexposed woods to be select kiln dried hardwood.•
Manufacturer to provide security hooks at all loose cushions.•
Urethane foam cushions shall meet California Technical Bulletin TB-117. CMHR foam or equal to be wrapped with two layers of 8oz sewn dacron and cased in muslin.
•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Provide extra high crown across all seats.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-18Page 1
Exhibit E-FF&E Package
E-76
23Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Ergo Task Chair
Item Number: SG-18
Item Quantity: 8 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Instructions:
All table bases, cocktail and end tables, dining chairs, and upholstered seating to have nylon glides•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-18Page 2
Exhibit E-FF&E Package
E-77
21
Area Qty(s): 10: 32
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Activity Chair
Item Number: SG-19
Item Quantity: 16 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Revision(s):
Contact:
Phone:
Fax:
Address: 770 S. 70th StMilwaukee WI
Address:Denver CO
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 558-1010
Web:Web: www.nationalbusinessfurniture.com
Mobile: (720) 545-4050
Phone:
Fax:
Description: Activity Chair w/ Upholstered Seat and Back
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
At Senior Room
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: 26216
Material/Finish: Chocolate Wood Finish
Dimensions: 23.5"W x 23.5"D x 36"H
Model Name: Square Back Dining Chair by Stance Healthcare
Seat Height: 19"
Seat Depth: 18"
Arm Height: 27"
Seat Cushion Style: Tight Seat
Back Cushion Style: Tight Back
Cushion Content:
Notes: 100% Polyurethane Upholstery Included; Color: Buff; Healthier Hospitals Initiative Compliant.Fully Assembled; Client/GC Responsible From Unloading From Delivery Truck Tailgate.
Instructions:
All unexposed woods to be select kiln dried hardwood.•
Urethane foam cushions shall meet California Technical Bulletin TB-117. CMHR foam or equal to be wrapped with two layers of 8oz sewn dacron and cased in muslin.
•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
All table bases, cocktail and end tables, dining chairs, and upholstered seating to have nylon glides•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-19Page 1
Exhibit E-FF&E Package
E-78
21
Area Qty(s): 10: 3
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Bariatric Chair
Item Number: SG-20
Item Quantity: 3 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Revision(s):
Contact:
Phone:
Fax:
Address: 770 S. 70th StMilwaukee WI
Address:Denver CO
Contact:
E-mail: [email protected]: [email protected]
800# : (800) 558-1010
Web:Web: www.nationalbusinessfurniture.com
Mobile: (720) 545-4050
Phone:
Fax:
Description: Metal Frame Bariatric Chair with Upholstered Seat and Back
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
2E+03Model Number: 26527
Material/Finish: Silver Ash Wood Finish/ Blue Vinyl Upholstery
Model Name: Bariatric Chair
Seat Height: 19"
Seat Depth: 19.5"
Arm Height: 25.5"
Seat Cushion Style: Attached
Back Cushion Style: Attached
Width: 36.5"
Height: 37.5"
Depth: 29"
Instructions:
Refer to preamble for further furnishings and upholstery specifications and information.•
All stress joints to be corner blocked, glued, double dowelled and screwed.•
All unexposed woods to be select kiln dried hardwood.•
Manufacturer to provide security hooks at all loose cushions.•
Urethane foam cushions shall meet California Technical Bulletin TB-117. CMHR foam or equal to be wrapped with two layers of 8oz sewn dacron and cased in muslin.
•
Manufacturer to submit shop drawings for designer approval prior to manufacturing.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Provide extra high crown across all seats.•
All table bases, cocktail and end tables, dining chairs, and upholstered seating to have nylon glides•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-20Page 1
Exhibit E-FF&E Package
E-79
22Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Bariatric Chair
Item Number: SG-20
Item Quantity: 3 ea
Manufacturer: National Business Furniture Source: Riley McCormick
Instructions:
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SG-20Page 2
Exhibit E-FF&E Package
E-80
21
Area Qty(s): 3: 16
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Sofa Back COM
Item Number: SGF-09.1
Item Quantity: 16 yds
Manufacturer: DesignTex Source: DesignTex
Revision(s):
Contact: Kellie Bailey
Phone: 303-722-1777
Fax: 303-722-7703
Address: 200 Varick StreetNew York NY 10014
Address: 601 South Broadway, Suite SDenver CO 80209
Contact:
E-mail: [email protected]:
800# :800-221-1540 800#:800-736-2007
Web:Web: http://www.designtex.com
Phone:
Fax:
Description: Geometrix Woven Upholstery in Tan, Grey, and Blue
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Pattern Number: 3922-101
Color: Slate
Width: 54"
Repeat: 28" v , 28" h
Content: 73% Acrylic, 27% polyester
Railroad: No
Fire Rating: CAL TB 117-2013, UFAC Class 1, NFPA 260, FMVSS 302, IMO 8.2
Durability: 100,000
Pattern Name: Angles
Finish: Stain Repellent
Instructions:
Purchasing agent to verify yardage required. Designer not responsible for quantities or take offs•
Refer to preamble for further furnishings and upholstery specifications and information.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Mill to submit cutting/strike off/sample for Designer approval.•
Purchasing agent to verify yardage required. Designer not responsible for quantities or take offs•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SGF-09.1Page 1
Exhibit E-FF&E Package
E-81
21
Area Qty(s): 3: 9
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Sofa Seat COM
Item Number: SGF-09.2
Item Quantity: 9 yds
Manufacturer: Arc Com Source: Arc Com Fabrics
Revision(s):
Contact: Wendy Stoll
Phone: 303-220-7380
Fax: 303-220-5150
Address: 33 Ramland SouthOrangeburg NY 10962
Address: 6456 South Quebec, Suite 45Englewood CO 80111
Contact: Wendy Stoll
E-mail: [email protected]: [email protected]
800# :800-228-7906
Web: https://arc-com.com/Web: www.arc-com.com
Phone: 914-365-1100
Fax: 310-659-2810
Description: Solid Tweed Texture Vinyl Fabric
Required Item(s) for Designer Approval Prior to Fabrication:
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Pattern Number: AC-63533
Color: Denim #14
Width: 54"
Repeat: NA
Content: 100% Polyester/100% Phthalate Free Vinyl Face
Railroad: No
Fire Rating: CA 117 2013, NFPA 260, UFAC - Class 1
Durability: 300,000 Dbl Rubs
Pattern Name: Insight
Instructions:
Purchasing agent to verify yardage required. Designer not responsible for quantities or take offs•
Refer to preamble for further furnishings and upholstery specifications and information.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Mill to submit cutting/strike off/sample for Designer approval.•
Purchasing agent to verify yardage required. Designer not responsible for quantities or take offs•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SGF-09.2Page 1
Exhibit E-FF&E Package
E-82
21
Area Qty(s): 3: 38.5
Project #: 19030
Issue Date: 06/11/20
Project Name: Ocala Community Center
Item Description: Flair Lounge Chair COM
Item Number: SGF-10
Item Quantity: 38.5 yds
Manufacturer: Arc Com Source: Arc Com Fabrics
Revision(s):
Contact: Wendy Stoll
Phone: 303-220-7380
Fax: 303-220-5150
Address: 33 Ramland SouthOrangeburg NY 10962
Address: 6456 South Quebec, Suite 45Englewood CO 80111
Contact: Wendy Stoll
E-mail: [email protected]: [email protected]
800# :800-228-7906
Web: https://arc-com.com/Web: www.arc-com.com
Phone: 914-365-1100
Fax: 310-659-2810
Description: Solid Tweed Texture Vinyl Fabric
Required Item(s) for Designer Approval Prior to Fabrication: Prepared By: BSA
Seaming Diagram Strike-Off Shop DwgsFinish Sample Cutting Prototype Flame Certificate
Pattern Number: AC-63533
Color: Denim #14
Width: 54"
Repeat: NA
Content: 100% Polyester/100% Phthalate Free Vinyl Face
Railroad: No
Fire Rating: CA 117 2013, NFPA 260, UFAC - Class 1
Durability: 300,000 Dbl Rubs
Pattern Name: Insight
Instructions:
Purchasing agent to verify yardage required. Designer not responsible for quantities or take offs•
Refer to preamble for further furnishings and upholstery specifications and information.•
Manufacturer to sidemark outside of shipping package with property, item, item number, and area specified.•
Mill to submit cutting/strike off/sample for Designer approval.•
Purchasing agent to verify yardage required. Designer not responsible for quantities or take offs•
Vendor substitution is prohibited unless expressly requested and/or approved by designer.•
Vendor to submit cuttings to designer for approval as noted on specifications prior to shipping to fabricator.•
Ohlson Lavoie Collaborative 1401 Zuni Street Suite 102 Denver, CO 80204 Phone: 303-294-9244 Fax: 303-294-9440 www.olcdesigns.com
SGF-10Page 1
Exhibit E-FF&E Package
E-83