materials services krupp drifter hb48.soilmec.net.pl/wp-content/uploads/2017/08/krupp-hb-48.pdf ·...
TRANSCRIPT
KRUPP Drifter HB48
• Especially developed for overburden drilling, drive drilling, threaded self-drilling anchors and micropiles.
• Casing diameter up to 177 mm (7 inch) and threaded hollow bars up to a diameter of 103 mm (4 inch).
• The standard built-in rubber damping mechanism improves retraction of casings and rods and avoids blank impacts.
• Optional: electric, hydraulic or manual changeover for the rotary drive speed and for the percussion mechanism frequency.
• Options: external flushing head, central lubrication system and integrated RPM sensor.
Compact design – the ideal drifter (hammer drill) for mid-size and larger drill rigs and excavator mounted drill masts.
KRUPP Drifter HB48
Main Dimensions
rigs and excavator mounted drill masts.
KRUPP Drifter HB48
Rotary Drives
Operating pressure (kp/cm²) 180 - 200 bar
Oil flow rate (l/min) 70 - 90 lpm
Impact rate (min-1) 1,200 / 1,900 / 2,400 bpm
Single impact energy (Joule) 750 / 480 / 375 Nm
Male thread C90 left, C90 right
Other shank adaptors (striker bars) are available
Shank Adaptors (Striker Bars)
Motor-Version HP677.5 ccm
Pressure at rotary drive 140 bar 200 bar 240 bar 280 bar
Gear 4th 3rd 2nd 1st 4th 3rd 2nd 1st 4th 3rd 2nd 1st 4th 3rd 2nd 1st
Oil
flow
rat
e (l
pm)
90 Torque (Nm)
Speed (rpm)
2,00080
3,20053
4,60040
7,10027
3,20080
5,00053
7,00040
10,60027
3,80080
5,90053
8,20040
12,50027
4,50080
7,00053
9,70040
14,60027
150 Torque (Nm)
Speed (rpm)
1,400133
2,70089
4,30066
6,70044
2,600133
4,40089
6,60066
10,20044
3,200133
5,40089
7,90066
12,10044
3,900133
6,50089
9,30066
14,30044
170 Torque (Nm)
Speed (rpm)
1,200151
2,500100
4,10075
6,50050
2,300151
4,200100
6,50075
10,00050
2,900151
5,200100
7,70075
11,90050
3,700151
6,200100
9,20075
14,00050
Other motor versions are available
1st gear (parallel mode), 2nd gear (parallel + 2-speed mode), 3rd gear (serial mode), 4th gear (serial + 2-speed mode)
Motor-Version HP480 ccm
Pressure at rotary drive 140 bar 200 bar 240 bar 280 bar
Gear 4th 3rd 2nd 1st 4th 3rd 2nd 1st 4th 3rd 2nd 1st 4th 3rd 2nd 1st
Oil
flow
rat
e (l
pm)
90 Torque (Nm)
Speed (rpm)
1,80090
2,90060
4,10045
6,30030
2,80090
4,40060
6,20045
9,40030
3,40090
5,30060
7,30045
11,10030
4,00090
6,20060
8,60045
13,00030
150 Torque (Nm)
Speed (rpm)
1,200150
2,400100
3,80075
5,90050
2,300150
3,900100
5,90075
9,00050
2,800150
4,800100
7,00075
10,70050
3,500150
5,700100
8,30075
12,60050
170 Torque (Nm)
Speed (rpm)
1,000170
2,200114
3,70085
5,70057
2,100170
3,700114
5,70085
8,80057
2,600170
4,600114
6,80085
10,50057
3,200170
5,500114
8,10085
12,40057
1st gear (parallel mode), 2nd gear (parallel + 2-speed mode), 3rd gear (serial mode), 4th gear (serial + 2-speed mode)
Motor-Version HP677.1 ccm (standard)
Pressure at rotary drive 140 bar 200 bar 240 bar 280 bar
Gear 4th 3rd 2nd 1st 4th 3rd 2nd 1st 4th 3rd 2nd 1st 4th 3rd 2nd 1st
Oil
flow
rat
e (l
pm)
90 Torque (Nm)
Speed (rpm)
2,50064
4,10043
5,80032
8,90021
3,90064
6,20043
8,70032
13,20021
4,70064
7,40043
10,30032
15,60021
5,60064
8,80043
12,10032
18,30021
150 Torque (Nm)
Speed (rpm)
1,700107
3,40071
5,40053
8,40036
3,200107
5,50071
8,30053
12,70036
4,000107
6,70071
9,90053
15,10036
4,900107
8,10071
11,60053
17,80036
170 Torque (Nm)
Speed (rpm)
1,400121
3,10080
5,20060
8,10040
2,900121
5,30080
8,10060
12,50040
3,700120
6,40080
9,70060
14,80040
4,600121
7,80080
11,40060
17,50040
1st gear (parallel mode), 2nd gear (parallel + 2-speed mode), 3rd gear (serial mode), 4th gear (serial + 2-speed mode)
Percussion Unit