Mattel Loopz Speaker ReplacementThis guide will show you how to replace a faulty speaker in the Mattel Loopz game.

Written By: Trevor Lasiter

Mattel Loopz Speaker Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 8

INTRODUCTION

This guide will show you how to properly replace the speaker for the the Mattel Loopz interactivegame.

TOOLS:Phillips #2 Screwdriver (1)

Phillips #1 Screwdriver (1)

Soldering Station (1)

Spudger (1)

PARTS:AA Batteries (4)

Speaker (1)

Mattel Loopz Speaker Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 8

Step 1 — Batteries

Use a No. 2 Phillips headscrewdriver to take out the 1/4"screw that holds the battery cover inplace on the bottom of the device.

Step 2

Take out the 4 AA Batteries.

Mattel Loopz Speaker Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 8

Step 3 — Speaker

Remove red screw covers (13 total)using spudger.

Step 4

Remove the thirteen 12.7mm screwswith a #1 Phillips screwdriver.

Mattel Loopz Speaker Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 8

Step 5

Remove 6 white caps using spudgerto reveal screws underneath.

Step 6

Remove the six 16mm screws with a#1 Phillips screwdriver.

Mattel Loopz Speaker Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 8

Step 7

Remove the white cover. Be sure toremove the front and the back.

Step 8

Remove the black, plastic cover toreveal the internal electronics asshown.

Mattel Loopz Speaker Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 8

Step 9

Remove the two 6.4mm screws witha #1 Phillips screwdriver.

Step 10

Remove the speaker as shown.

Mattel Loopz Speaker Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 7 of 8

To reassemble your device, follow these instructions in reverse order.

This document was last generated on 2018-03-27 02:27:18 AM.

Step 11

Use a soldering iron to desolder thered and black speaker wires fromthe speaker.

Mattel Loopz Speaker Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 8 of 8