Type Policy Letter √ Service Information Attention Service Managers √ Service and Parts Managers Models MAH14PDAAL, MAH14PDAAQ, MAH14PDAAW, MAH14PDABL,

MAH14PDABW, MAH14PDAEW, MAH14PDAGW, MAH14PDBAW, MAH14PDBEW, MAH14PDBGW, MAH14PDCBQ, MAH14PDCBW, MAH14PDDWW, MAH14PDSAW, MAH14PNAEW, MAH14PNAGW, MAH14PNAWW, MAH14PNBAW, MAH14PNBEW, MAH14PNBGW, MAH14PNSAW, MAH14PRAWW, MAH14PSAAW, MAH14PSAGW, MAH20PDA3W, MAH20PDAWQ, MAH20PDAWW, MAH20PDCXQ, MAH20PDCXW, MAH20PNAWW, MAH20PRAWW, MAH20PRDWW, MAH20PSAWW, MAH21PDA3W, MAH21PDAGW, MAH21PDAWQ, MAH21PDAWW, MAH21PDCXQ, MAH21PDCXW, MAH21PDD3W, MAH21PDDGW, MAH21PDDWQ, MAH21PDDWW, MAH21PDDXW, MAH21PNAGW, MAH21PNAWW, MAH21PNDGW, MAH21PNDWW, MAH21PRAWQ, MAH21PRAWW, MAH21PSAWW, MAH3000AAW, MAH3000AEW, MAH3000AGW, MAH3000AKW, MAH3000AWA, MAH3000AWQ, MAH3000AWW, MAH3000BGW, MAH4000AWQ, MAH4000AWW, MAH4000BWQ, MAH4000BWW, MAH5500AWW, MAH5500BWQ, MAH5500BWW, MAH55FLBWQ, MAH55FLBWW, MAH6500AWQ, MAH6500AWW, MAH7500AWQ, MAH7500AWW, MAH7550AAW, MAH7550AGW, MLE19PDAGW, MLE19PDAYW, MLE19PDAZW, MLE19PDCZQ, MLE19PDCZW, MLE19PNAUW, MLE19PNAYW, MLE19PRAYW, MLE19PRAZW, MLE2000AYW, MLE2000AZW, MLG19PDAEW, MLG19PDAGW, MLG19PDAWW, MLG19PDAXW, MLG19PDBGW, MLG19PDCXQ, MLG19PDCXW, MLG19PDSAW, MLG19PNAWW, MLG19PRAWW, MLG19PRAXW, MLG2000AWW, MLG2000AXW, MLG23MNAWW

Issue Washer stops in mid-cycle and/or flashes a code. Warranty Standard product manufacturing warranty applies. Action The motor drive system experienced a momentary loss of neutral feed from the power cord to the

Motor Control Board. The neutral line for the Motor Control Board passes across the water valve solenoids. Neutral to the motor drive system can be momentarily lost If there is poor crimping of any of the wire terminals in this circuit. This situation could result in a misdiagnosis and unnecessary replacement of the Motor or Motor Controller Board.

Current Neptune front load washers will indicate a false locked rotor signal to the Machine Control Board. Washers with a LED display will flash code “LR” in the display. LCD washers will display “Locked Rotor.” The earlier built front loaders will not display a code, but simply shut down in mid-cycle or will not start.

Pull each terminal of the white wire harness connected to each water valve solenoid and verify the wire is properly stripped and crimped to the metal terminal connector of the wire harness. Make sure the wires fit snug on the terminals of the water valve solenoids.

A product improvement has been made to the following models. The neutral wire is routed across the pump only, and now by passes the water valve solenoids.

MAH55FLBWQ/W ..................... Series 12 MAH5500AWQ/W ..................... Series A7 MAH6500AWQ/W ..................... Series 33 MAH7500AWQ/W ..................... Series A6

Technical Bulletin

Product Laundry Com. Laundry

Brand Maytag

Date: April 2004 No: TDL–0044B–B TCL–0015B–B ITDL-0017-B ITCL-0007-B Page 1 of 1 Supersedes: TDL-0044A-B

TCL-0015A-B