mb 38 ia
TRANSCRIPT
8/12/2019 MB 38 IA
http://slidepdf.com/reader/full/mb-38-ia 1/10
Question 1
Define the terms Strategy? Explain
1) Corporate strategy
2) Business strategy3) Functional strategy
Answer STRATEGY:
Strategy means the grand plan which helps in executing the Vision. The term is borrowed from the
military which distinguished between the grand plan and actual action by calling the former
strategy and the latter tactics.
1) CORPORATE STRATEGY
The ESSAR group has several businesses but they have only one corporate headquarter which
controls all business. Each of these businesses may be run by an independent company like
ESSAR STEEL run the steel business and ESSAR POWER runs the power business (they both
are different companies).The corporate headquarters will have grand plans on how each business
should operate. For example, it might say that that ESSAR STEEL should develop and production of
various grades of steel or that ESSAR POWER should expand business to various part of India like
Orissa, Madhya Pradesh.
This grand plan created by the corporate headquarters is called „Corporate Strategy‟. It lays down
the grand plan to be followed by each business under a corporate headquarters.
DRIVE SPRING 2014
PROGRAM MBADS/ MBAFLEX/ MBAHCSN3/ MBAN2/ PGDBAN2
SEMESTER 1
SUBJECT CODE &
NAME
MB0038 – Management Process and Organization Behavior
BK ID B1621
CREDIT & MARKS 4 Credits, 60 marks
Roll no 1402006410
Name : SUJIT EZHUTHASSAN
8/12/2019 MB 38 IA
http://slidepdf.com/reader/full/mb-38-ia 2/10
2) BUSINESS STRATEGY
Every business, small or big, will have a business strategy. This is the grand
plan doing business. For example, ESSAR STEEL can make a grand plan of
expanding his business to other states of India. They can take a decision to be
the provider of low cost steel roll sheets. This is what business strategy is. If
we take an example of ESSAR, each business of ESSAR (say ESSAR OIL,
ESSAR STEEL, ESSAR POWER, etc) would have their own business
strategy in consonance with the corporate strategy.
3) FUNCTIONAL STARETEGY
Once you have a business strategy, each independent department will need
its own strategy. For example, the HR of ESSAR STEEL will need a
strategy quite different from the HR of ESSAR POWER. So, the
operations, marketing, finance, HR, etc of each business will make their owngrand plan or strategy and this is called functional strategy. In other words,
the grand plan made by each functional area is called functional strategy.
Usually organizations have operations strategy, finance strategy, marketing
strategy, and HR strategy. If you are large and well diversified, you may
have an information strategy, supply chain strategy, etc. also and this
depends to some extend on the nature of your business. For example, if you
are in retail chain business like Reliance Hypermart, you may have a
merchandise strategy (what products to sell) and supply chain strategy
(how to procure the products at the lowest cost and move them nationally) as
these are very important to business success.
8/12/2019 MB 38 IA
http://slidepdf.com/reader/full/mb-38-ia 3/10
Question 2 Define the term ‘management’. Explain the Behavioral science
theory and Systems theory.
Answer 2 Management :
According to F.W. Taylor , “ Management is an art of knowing what to do,
when to do, and see that it is done in the best and cheapest way”.
According to Harold Koontz, “ Management is an art of getting things one
through and with people in formally organized groups. It is an art of creating
an environment in which people can perform as individuals and can co-
operate towards the attainment of group goals”.
BEHAVIOURAL SCIENCE THEORYThe thought of behavioral science theory was originated by Wilfred
Pareto in 1896, and he researched do on organization and management
relationship. Later, Hugo Munsterberg applied psychology to increase
industrial production in 1912 and around the same time, Walter Dil Scott
applied psychology to advertising, marketing, and personnel in 1910
and 1911. But it was Elton Mayo and F.J Roethlisberger who made
an impact on the behavioral science theory through their Hawthorne
experiments in Western Electric Company in 1933. These experiments
proved that good working relationship with the supervisor and colleagues
and the idea of challenge in the job accounted for higher productivity.Challenge is created through setting high goals which cannot be
normally achieved but which can be achieved with a little additional
effort. These experiments brought to fore the importance of behavioral
science in management. Extending the idea sometime in 1946 and 1947,
Max Weber propounded the theory of bureaucracy.
SYSTEM THEORY
Though the systems theory can be traced to biology, where we have
cardiovascular system, nervous system, etc which are fairly independentyet interdependent, it was Chester Barnard who extended this into
management area through his writing „Functions of the Executive‟ in
1938. In systems theory, we perceive that organizations have a number
of fairly independent systems such as purchase system, operations
system, marketing system, financial system, etc. The working of these
are independent, but it has to be integrated by the manager. This theory,
8/12/2019 MB 38 IA
http://slidepdf.com/reader/full/mb-38-ia 4/10
perhaps, brings the idea of Integration as a key component of
management.
Question 3Give the definition and importance of planning in an
organization and explain the steps in planning.
Answer 3
Definition :
PLANNING
Planning can be defined as a basic management function which
enables one to select the purpose of the business, and how the
resources should be utilizes to achieve that purpose to include
using the available resources optimally to do that. Planning implies
goal setting for the organization keeping in mind the constraints,
opportunities, and threats as much as what the person or business which
is planning wants to do. Thus, a plan is a blueprint for goal
achievement, a blue print that specifies the necessary resource
allocations, schedules, tasks, and other actions to achieve the
purpose.
IMPORTANCE OF PLANNING
Planning is important for the following reasons:
It helps the management to clarify, focus, and research their
businesses or project's development and prospects.
It provides a considered and logical framework within which
a business can develop and pursue business.
It offers a benchmark against which the actual performance
can be measured and reviewed.
It plays a vital role in helping to avoid mistakes or recognize
hidden opportunities.
In the business context, it guides the development of products,
management, finances, and most importantly, markets and
competition.
It helps in forecasting the future and makes the future visible
8/12/2019 MB 38 IA
http://slidepdf.com/reader/full/mb-38-ia 5/10
to some extent.
It bridges between where we are and where we want to go.
There are Eight steps in Planning as shown in below
1)
Being aware of opportunities2) Establishing objectives
3) Developing premises
4) Determining alternative courses
5) Evaluating alternative courses
6) Selecting a course
7) Formulating plans
8) Qualifying plans by budgeting
Explanation of Each steps of planning in detail
1) Being aware of opportunities – This means being aware of
the customer needs, market, competition, our strengths,
and weaknesses. This is usually done through market
research, competitor analysis, and analysis of own strengths
and weaknesses through a formal process called SWOT
analysis (Strength, Weaknesses , Opportunity, and Threat).
2) Establishing objectives – This implies establishing what we
want to be and what we want to accomplish and when and inrelation to which market segment. At the highest level,
this is done through vision and mission building. This
process takes place at business level, project level, etc also
3) Developing premises – Deciding on the environment (both
external and internal) in which our plans are going to
operate. Business has external environment created by
political factors to include legislation, legal framework, etc
The external analysis is done through a process called
PEST analysis (Political, Economic, Social, and
Technological). Some add culture as an additional separatefactor while others include it in Social. PEST is a framework
and helps you to think systematically through the factors that
could affect. In relation to the business mission, each of the
factors may become a threat or opportunity (or of course may
be neither).
4) Determining alternative courses – Identifying the most
8/12/2019 MB 38 IA
http://slidepdf.com/reader/full/mb-38-ia 6/10
promising alternatives to accomplish what we want to. This is
done by combining the information about the opportunities,
threats, and own strength and weaknesses. This is done
through another framework called TOWS (Threat,
opportunity, weakness and strength) matrix.
5) Evaluating alternative courses –
Comparing the alternatives
to find out which of them will meet our goals and at
optimal cost and profit keeping sustainability into mind.
6) Selecting a course – Selecting the course that we want to
follow.
7) Formulating plans – This implies making plans that support
the course of action by buying equipment, space, planning the
type of HR, etc.
8) Qualifying plans by budgeting – Identifying the cost involved,
how the financial resources will be mobilized, what is capitalexpenditure, what is operational expenditure, the working
capital, etc.
Question 4 What is meant by leading? Describe the characteristics of
leading.
Answer Leading can be defined as the process of setting direction, creating
alignment, and creating engagement to deliver high productivity and to
facilitate change.
Leading rather than directing, liberated the human spirit of
independence and desire to meet challenging goals and surpass
them. These organization showed profits several times more than
those that were still in the world of directing and they easily glided
through many economic downturns. Southwest Airlines of the U.S is
a classical example wherein it reported profit quarter after quarter
for over 30 years without a break when every other airline was
reporting loss. Closer home, Infosys did the same as also the Birla
group, which in a matter of two decades transformed itself into a
multi business giant. Thus directing and leading are not mutually
exclusive, nor are they two sides of a coin. They can be perceived
to be a continuum along which organizations to achieve maturity in
getting work done and surpassing the goals. Directing is therefore an
essential part of leading but is insufficient to compete in the
contemporary world; where leading is the key to creating competitive
advantage. There are several text books which project leading as a
8/12/2019 MB 38 IA
http://slidepdf.com/reader/full/mb-38-ia 7/10
subset of directing but a reality check indicates that the vice versa is
true. Leading or leadership function is said to be the heart of
management process. Therefore, it is the central point around which
accomplishment of goals take place. A few philosophers call leading
as “Life spark of an enterprise”. It is also called as an actuating
function of management because it is through direction that the
operation of an enterprise actually starts. Being the central character
of an enterprise, it provides many benefits to a concern.
CHARACTERISTIC OF THE LEADING
1) Pervasiveness
Leading is required at all levels of organization. It is incorrect to believe that
leading is required only at the top level. He/she may be motivating a team of
5 or 10 people while the CEO may be motivating the whole company, but
the function of giving targets, resources, support, motivating, etc. does notchange.
2) Continuity
Leading is a continuous activity as it is continuous throughout the life of
organization. It takes place on a day to day basis though its importance may
become higher when the organization is undergoing a change.
3) Human factor
It follows that there is a key human factor in leading and because human factor
is complex and behavior is unpredictable, leading function is important and
people have to learn the art of leading. Further, this characteristic is based on
the belief that Human beings are motivated by challenging jobs and they feel
a sense of achievement in doing these. The premise is also that people
normally work towards achieving the goals i.e., human being have a goal
oriented behavior.
4) Creativity
Leading is a creative activity because of the human factors and individual
variances and group Variances. It is the creativity aspect which brings in the
differentiation. Hence, we can see that creating functions around which people
find meaning is a creative function that leads to achievements.
5)
Executive functionLeading is carried out by all managers and executives at all levels throughout
the working of an enterprise. A follower receives tasks, resources, know-how,
and support from a leader and he/she trusts his/her leader to do the same.
6) Delegating function
Leading implies guiding followers to the destination. It means that the
followers actually execute and if they have to execute, they need the powers
8/12/2019 MB 38 IA
http://slidepdf.com/reader/full/mb-38-ia 8/10
for doing so. Hence, delegating is natural fallout of leading. It also follows that
the leader trusts his/her followers and the vice versa. Hence, mutual trust
always exists in leading. Therefore, delegating function based on mutual trust
is a characteristic of leading.
Question 5 what are ‘attitudes’? Explain the components and
functions of attitude.
ANSWER 5
ATTITUDES:
Attitudes are also known as "frames of reference." They provide the
background against which facts and events are viewed. It becomes
necessary to know the attitudes of members of an organization because
they have to perceive specific aspects like pay, hours of work, promotion,
etc. of their work life in the wider context of their generalized
attitudes An attitude is the predisposition of the individual to evaluate someobjects in a favorable or an unfavorable manner. The most pervasive
phenomenon is "attitude." People at work place have attitudes about lots of
topics that are related to them. These attitudes are firmly embedded in a
complex psychological structure of beliefs. Attitudes are different from
values. Values are the ideals, whereas attitudes are narrow. They are our
feelings, thoughts and behavioral tendencies toward a specific object or
situation.
COMPONENTS OF ATTITUDE
There are three components of an attitude namely 1) Cognition, 2) Affect and 3) Behavior.
1) Cognition. It is the mental process involved in gaining knowledge and
comprehension, including thinking, knowing, remembering, judging and problem
solving. The cognition component of an attitude reflects a person‟s perceptions or
beliefs. Cognitive elements are evaluative beliefs and are measured by attitude
scales or by asking about thoughts.
2) Affect. This component refers to the person's feelings that result from his/her beliefs
about a person, object or situation. A person who believes that hard work earns promotions may feel angry or frustrated when he/she works hard but is not
promoted. The affective component Becomes stronger as an individual has more
frequent and direct experience with a focal object person or situation. 'Affect' is the
emotional component of an attitude. It refers to an individual's feeling about
something or someone.
3) Behavior. This component refers to the individual's behavior that occurs as a result
8/12/2019 MB 38 IA
http://slidepdf.com/reader/full/mb-38-ia 9/10
of his or her feeling about the focal person, object or situation. An individual may
complain, request a transfer, or be less productive because he or she feels
dissatisfied with work. The behavioral component of an attitude refers to an
intention to behave in a certain way toward someone or something.
FUNCTION OF ATTITUDES
According to Katz, attitudes serve four important functions from the
viewpoint of organizational behavior. These are as follows:
1) Adjustment function. Attitudes often help people to adjust to their work
environment. Well treated employees tend to develop a positive attitude towards
their job, management. Attitudes help employees adjust to their environment and
form a basis for future behavior.
2) Ego-defensive function. Attitudes help people to retain their dignity and self-
image. When a young faculty member who is full of fresh ideas and enthusiasm,
joins the organization, the older members might feel somewhat threatened byhim/her. But they tend to disapprove his
Creative ideas as „crazy‟ and „impractical‟ and dismiss him/her altogether.
3) Value-expressive function. Attitudes provide individuals with a basis for
expressing their values. For example, a manager who values hard and sincere work
will be more vocal against an employee who is having a very casual approach
towards work.
4) Knowledge function. Attitudes provide standards and frames of reference that
allow people to understand and perceive the world around them. If one has a strong
negative attitude towards the management, whatever the management does, even
employee welfare programmers‟ , can be perceived as something „bad‟ and asactually against them.
Question 6 Define leadership. Differentiate between ‘Laissez Faire’ and
‘democratic’
Answer
LEADERSHIP:
" Leadership is a function of knowing yourself , having a vision that
is well communicated, bui lding trust among coll eagues, and taking effective
action to realize your own leadership Potenti al ."
A simple definition of leadership is that leadership is the art of
motivating a group of people to act towards achieving a common goal. This
definition of Leadership captures the leadership essentials of inspiration and
preparation.
Effective leadership is based upon ideas but won't happen unless those
8/12/2019 MB 38 IA
http://slidepdf.com/reader/full/mb-38-ia 10/10
ideas can be communicated to others in a way that engages them.
In simple words, the leader is the inspiration and the director of the action.
LAISSEZ FAIRE LEADERSHIP STYLE
Nelson and Quick defines it as “a style of leadership in which the leader fai ls to
accept the responsibi l it ies of the posit ion ”.
Its distinct characteristics are:
1) Allows followers free rein to set their own goals
2) Engages in noncommittal, superficial communication
3) Avoids discussion with followers to set policy and procedures
4) Avoids interaction
5) Provides suggestions and alternatives for the completion of tasks only when
asked to do so by followers6) Provides infrequent feedback of any kind
7) Avoids offering rewards or punishments
8) May exhibit either poor or effective listening skills
9) Avoids conflict
DEMOCRATIC
Nelson and Quick defines democratic leadership as “a style of leadershi p
in wh ich the leaders takes collaborati ve, responsive, interactive actions with
fol lowers concern ing the work and the work envir onment ”.
Its distinct characteristics are:
1) Involves followers in setting goals
2) Engages in two-way, open communication
3) Facilitates discussion with followers
4) Solicits input regarding determination of policy and procedures
5) Focuses on interaction
6) Provides suggestions and alternatives for the completion of tasks
7) Provides frequent positive feedback
8) Rewards good work and uses punishment only as a last resort
9) Exhibits effective listening skills
10) Mediates conflict for group gain