mc0087-mqp
DESCRIPTION
MC0087 Question paper with answerTRANSCRIPT
Sl No Description1 TCP/IP protocol suite is used for ____________.
Addressing and Routing services
Terminal Emulation
2 ________acts as source and destination for IP traffic.
Interface
NodeHost
Router
3
Transfer Mail Protocol (TMP)
4 _________ is an example of an Interface.
Telnet
FTP
USB
Netowrk Adapter
5
Internet Assigned Number Authority (IANA)
Internet Research Task Force (IRTF) Internet Engineering Task Force (IETF)
All of the above.
6A Router connecting two or more subnets is called as ________.
Subnet
Network
Interface
Protocol
7 What is the maximum length of frame format in Ethernet?
1500
Enhanced and Reliable communication
File transfer between different systems.
___________ protocol is used to send messages and attachment of mails.File Transfer Protocol (FTP)
Simple Mail Transfer Protocol (SMTP)
None of the above.
Internet Architecture Board (IAB) governs which of the following bodies?
1526
1530
1546
8
Ethernet
IEEE 802
Fiber Distributed Data Interface (FDDI)
Point-to-Point Protocol (PPP)
9
Pad field
10
InATMARP protocol
ATMARP protocol
InARP protocol
ARP protocol
11 Which of the following is merely a packet framing protocol?
Point-to-Point Protocol (PPP)
Serial Line IP (SLIP)X.25
Frame Relay
12
ISDN Basic Rate Interface (BRI)
ISDN Primary Rate Interface (PRI)
Point-to-Point circuit (PPP)
ISDN NRZ encoding
13
VERS
Total length
HLEN
Which of the following defines a family of standards for 100 Mbps fiber optic LANs that provides the physical layer and media access control sub-layer of the data link layer, as defined by the ISO/OSI Model?
Within the Frame Relay frame format, which of the following is used for aligning data bits?Q.922 field
UI (0x03) field
NLPID field
Which of the following protocol resolves a host's hardware address for a known IP address?
Which of the following can support many concurrentB-channel links and one 64 Kbps D-channel?
Which of the following field in IP Datagram specifies the length of datagram?
Service type
14
Strict source routing
Loose source routing
Record Route
Internet time stamp
15
Class D addresses
Class C addresses
Class B addresses
Class A addresses
16
Type
Checksum
Code
Echo
17
Address Resolution protocol (ARP)
File transfer protocol(FTP)
Internet Control Message Protocol (ICMP)
18
Network address
Host number
Protocol address
Router address
19
External Internet
Intranets
Ethernet
Extranet
Which of the following route will not utilize the intermediate router?
Which class of IP addressing are used for multitasking with a limited area?
Which component of the ICMP message format is used to detect if another host is active in the network through the Ping command?
Which of the following protocols will not make use of ICMP messages to give information about errors?
Dynamic Host Configuration Protocol (DHCP)
In the given IP address, 128.3.5.9, what does 5.9 signify _________.
All connectivity to ___________ hosts must be provided with application gateways.
20 Which of the following are never valid as source address?
Unicast
Multicast
Broadcast
Any cast
21Which of the following provides the service for any casting?
IPV5
IPV6
IPV7
IPV8
22Which class of IP addressing was not brought in much use?
Class A addresses
Class D addresses
Class B addresses
Class C addresses
23
Class A addresses
Class D addresses
Class B addresses
Class C addresses
24
Type 2
Type 4
Type 3
Type 1
25The range of well known ports lie between ___ and _____.
1 and 1023
1 and 1024
2 and 1023
1 and 1022
26
Network layer
Physical layer
TCP/IP transport layer
Data link layer
Which of the following network addresses can accommodate 65,334 hosts?
Which of the following use default routes for interdomain routing?
Which layer use User Datagram Protocol (UDP) and Transmission Control Protocol (TCP)?
27 Which of the following protocols has STD number 6?
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
Address Resolution Protocol (ARP
Internet Control Message Protocol (ICMP)
28Which of the following does not ensure reliability of datagram?
Transmission Control Protocol (TCP)
Internet Control Message Protocol (ICMP)
Address Resolution Protocol (ARP
User Datagram Protocol (UDP)
29
40 bytes
50 bytes
60 bytes
70 bytes
30 Which of the following is connection-oriented protocol?
User Datagram Protocol (UDP)
Transmission Control Protocol (TCP)
Reverse Address Resolution Protocol (RARP)
Internet Control Message Protocol (ICMP)
31
Exterior Gateway Protocol (EGP)
Enhanced Interior Gateway Routing Protocol (EIGRP)
Border Gateway Protocol (BGP)
Static routing protocols
32
Link State Routing
33_________ is the protocol based on Xerox XNS routing protocol.
What is the maximum size of IP header in the UDP Datagram format?
Which of the following protocols is developed by Cisco systems?
Which of the following dynamic routing protocols discuss about Shortest-Path First (SPF) algorithm?
Path Vector Routing
Distance Vector Routing
Hybrid Routing
Exterior Gateway Protocol (EGP)
Routing Information Protocol (RIP)
Border Gateway Protocol (BGP)
Static routing protocols
34 What is the maximum size of RIP packets?
64 octets
128 octets
256 octets
512 octets
35
Border Gateway Protocol (BGP)
Exterior Gateway Protocol (EGP)
Enhanced Interior Gateway Routing Protocol (EIGRP)
Open Shortest Path First (OSPF)
36 Which of the following protocol is described in RFC 4271?
Border Gateway Protocol (BGP)
Routing Information Protocol (RIP)
Enhanced Interior Gateway Routing Protocol (EIGRP)
Open Shortest Path First (OSPF)
37 What is the STD number for File transfer protocol?
7
9
8
10
38
18
19
20
21
39In FTP, to execute a file transfer, the user begins by _________.
Navigating the directory structure
Connecting to a remote host
Listing files available for transfer.
Defining the transfer mode
40
Which of the following is an example of hybrid routing protocol?
In File transfer protocol, which server port is used for data connection?
While connecting to the remote host in FTP, the command used to authenticate the user is _______.
Open
UserSite
Pass
41
Get <remote filename> [<local filename>]
Mode <ascii|binary>
Put <remote filename> [<local filename>]
Connect <host>
42
2
1
3
4
43 Which of the following is based on end-to-end delivery?
File Transfer Protocol (FTP)
Simple Mail Transfer Protocol (SMTP)
Post Office Protocol (POP)
Internet Message Access Protocol (IMAP4)
44
user% remote-host@gateway-host
user@host
local-part@domain-name
None of the above
45
To
From
cc
Reply-to
46
51
5254
53
In case of Trivial File Transfer Protocol, which command is used to retrieve a file?
The opcode for "Read Request" operation used by Trivial File Transfer Protocol is _________.
The general form of the SMTP destination address is ________________.
Which of the following filed represents the sender of the message in an electronic mail?
What is the standard STD number of Post Office Protocol (POP)?
47
937
1959
4250
959
48
Authenticated state
Non-authenticated state
Selected state
Logout state
49
G.723.1
G.729
G.728
G.726
50
CANCEL
ACK
OPTIONS
PRACK
51
SIP 4xx
SIP 5xx
SIP 2xx
SIP 1xx
52
Resource Reservation Protocol (RSVP)
Stream Control Transmission Protocol (SCTP) Real-time Control Protocol (RTCP)
Real-time Transport Protocol (RTP)
53
5 Mbps to 30 Mbps
6 Mbps to 31 Mbps
7 Mbps to 32 Mbps
The older Post Office Protocol (POP) version 2 is described in RFC ________.
In which of these states in IMAP4 does the client has to select a mailbox to proceed?
Which of the following is an audio data compression algorithm for voice?
Which of the following request in Session Initiation Protocol (SIP) queries the capabilities of servers ?
Which of the following response is used to denote server failure?
Which of the following in SIP environment allows the receiver to detect packet loss?
What is the bandwidth requirement of Internet Protocol Television (IPTV)?
8 Mbps to 33 Mbps
54
Resource Reservation Protocol (RSVP)
Stream Control Transmission Protocol (SCTP) Real-time Control Protocol (RTCP)
Real-time Transport Protocol (RTP)
55
Source description report
APP
Receiver report
Sender report
56
MPEG-1
MPEG-2
MPEG-3
MPEG-4
57
703x575
704x576
705x577
706x578
58
Main Profile (MP)
Extended Profile (XP) Intended
Baseline Profile (BP)
High Profile (HiP)
59
\Deleted
\Recent
\Flagged
\Draft
60
Message sequence number message attribute
Which of the following monitors the quality of service provided to existing RTP sessions?
Which of the following is sent by the source of an RTP data stream?
Which of the following was initially designed as a video and audio compression standard?
H.261 allows sending still picture graphics with __________ luma resolution.
___________ profile is used widely in video conferences and mobile applications.
In flags message attribute, which of the following flag indicates that message has been completed?
Which of the following attribute shows relative position of the message in the mailbox?
Unique identifier (UID) message attribute
Unique identifier attribute
Flags Message attribute
Choice Solution
A
B BCD
A
B
C CD
A
B B
C
D
A
B
C
D D
AB
C
D D
A
B BC
D
A
B BC
D
A
B
C CD
A
B BC
D
A
B
C
D D
AB BC
D
A
B BC
D
A
B BC
D
A AB
C
D
A AB
C
D
A
B
C
D D
AB
C
D D
A
B BC
D
A
B
C
D
A
B
C
D
A
B
C
D
A
B
C
D
AB
C
D
A
B
C
D
A
B BC
D
A
B
C CD
A
B BC
D
A
B
C
D D
AB
C CD
A
B BC
D
A
B BC
D
A
B
CC
D
A
B BC
D
A
B
C
D D
AB
C CD
A AB
C
D
A
B BC
D
A
B
C CD
A
B BC
D
A
B
C
D D
A AB
C
D
A
B BC
D
A
B BC
D
A
B
C CD
A
B BC
D
A
B
C
D D
A AB
C
D
A
B AC
D
A
B BC
D
A
B
C CD
A
B BC
D
A
B
C
D D
A AB
C
D
A
B
C CD
A
B
C
D D
A AB
C
D
A
B BC
D
A
B
C CD
A
B
C
D D
A A
B
C
D