MOSCA – Corrugated Strapping SystemsMOSCA – Corrugated Strapping Systems

S T R A P P I N G S Y S T E M S

®

MASCHINENFABRIK Gartenstraße 1GERD MOSCA AG D-69429 Waldbrunn/Strümpfelbrunn

Tel.: + 49 (0)62 74 / 9 32-0Fax: + 49 (0)62 74 / 9 32-2 40Tel. Service: + 49 (0)62 74 / 9 32-110Internet: http://www.mosca-ag.comE-Mail: info@mosca-ag.com

KPA 131-26Fully-Automatic Pallet Packing Press to secure Pallet Loads� 3 strap guides with 3 strap guiding lances� 2 sealing heads (1 sealing head laterally movable)� Automatic top and bottom edge protection� Actuated roller conveyor / turntable / lifting turn cross

Capacity:up to 140 pallets/h,2 vertical strappingsPassage widths:1,800 - 3,200 mm

Polyester Strap / Polypropylene Strap� Polyester strap: Widths from 9 mm up to 15 mm� Polypropylene strap: Widths from 4 mm up to 15 mm

RO-TRC-3Fully-Automatic Strapping Machine � Infinitely adjustable conveying speed� PLC control Siemens type S7� Pneumatic double press� Fully-automatic strap threading system� Selector switch for single

or double strapping� Wear-free DC drive,

brushless motor technologyFrame sizes:

900 x 550 mm 1250 x 550 mm 1650 x 550 mm

2000 x 550 mm

RO-ATRSFully-Automatic Strapping Machine � Infinitely adjustable conveying speed� PLC control Siemens type S7� Pneumatic press including maintenance unit� Fully-automatic strap threading system� Exact package squaring

to all sides� Wear-free DC drive,

brushless motor technologyPassage widths:900 mm / 1300 mm /1650 mm / 1950 mm /2200 mm

RO-ATRS-KFor Strapping of 4- and 6-Corner Boxes as well as Crash-Lock Bottom Boxes� Infinitely adjustable conveying speed� PLC control Siemens type S7/OP� Pneumatic press, side pusher, package back stops� Fully-automatic strap

threading system� Pressure roller track� Wear-free DC drive,

brushless motor technologyPassage widths:750 mm / 900 mm /1300 mm / 1650 mm

UATRIFully-Automatic In-Line Strapping Machinewith Aligning Device� Infinitely adjustable conveying speed� PLC control Siemens type S7 with TP� Pneumatic, height adjustable pressure roller bar� Fully-automatic strap threading system� Exact package squaring to all sides� All strappings are

applied in-line

Passage widths:1300 mm /1600 mm /2000 mm

12/ 06 Subject to alterations

Mosca – the World of Strapping

®

S T R A P P I N G S Y S T E M S

Fully automatic In-line-Strapping Machine

MCB-2Strapping Machine

Option:powered exit table

S T R A P P I N G S Y S T E M S

®

Fully Automatic Corrugated Bundle Squaring and Strapping System

MCB-2Fully Automatic Corrugated Bundle Squaring and Strapping System

The new Mosca MCB-2 strapping system is the latestgeneration of corrugated bundle strappers with inte-grated squaring device. The fully automatic in-linestrapping machine features fast, automated setup andjob changes, giving extremely high process reliability.The smooth bundle control is achieved by using thelatest in brushless DC technology for the ultimate instrap sealer reliability and low maintenance. Through-put capability is up to 27 bundles per minute whilst atthe same time a smooth bundle transport is guaranteed.

System FeaturesSiemens S7 PLC control with "Proface” touch paneloperator interface

Integrated squaring and strapping functions

Automated setup system resets to the dimensions ofthe first bundle of the new size, at the push of a but-ton or signal from the upstream equipment.

Control of five sides of the bundle provides perfectlysquared, uniform bundles

Electrically driven, variable frequency controlled squa-ring and top/bottom conveyors provide smoothbundle transport.

Capability to strap up to 90 mm outside the bundlecentre (in 30 mm steps) allows for perfect strappingof complex bundles sizes and forms.

Electromechanical press

Strapping in the direction of bundle travel, typicallyin-line with flutes

Strapping TechnologyA pusher drives the bundle through pre-draped strap,placing strap on three sides. Swing arm pulls strappast the fourth side, completing the loop and activa-ting the heat seal.

Electromechanical strap tension

Sealing head, swing arm, side pusher and off-centrealignment in brushless DC technology.

Thermocouple controlled heat sealing system

Fully Automatic Corrugated Bundle Squaring and Strapping System

MCB-2Fully Automatic Corrugated Bundle Squaring and Strapping System

OptionsPowered exit table: six powered belts provide perfectbundle transport and increased productivity.Powered adjustment of machine centreline: this allowsthe MCB-2 to be perfectly integrated into your convey-ing systems – also when strapping off the centre line isa common requirement.Trouble light and low strap indicatorUpstream pacer conveyor: an in-liner that is perfectlyadjusted to the MCB-2 guarantees maximum efficiencyfor your job changing.Special colorConveyor height > 1040 mm

Technical DataCapacity:

up to 27 bundles per minute.

Strapping:Machine grade 5,6, 8 or 9 mm Polypropylene strap

Coil Dimension:Core diameter: 200 mmCoil width: 1 90 mm

Electrical Power:Voltage: 400 V (415, 440),

50/60 Hz, 3 PH16 A CEE-plug

Consumption: approx. 4 kVA

Conveyor height: 800 – 1040 mm

Color:Frame: RAL 5010 gentian bluePanels and guards: RAL 7035 grey

Weight: 1500 kg (nominal width 1300 mm)

Sizes:Nominal width 1300 mm 1600 mm

Length min. 170 mm 170 mmLength max. 1300 mm 1300 mmWidth min. 170 mm 170 mmWidth max. 1300 mm 1600 mmHeight min. 40 mm 40 mmHeight max. 350 mm 350 mm

Length > 1300 mm only possible with one pusher

Option:required for off-centre bundling

Option:powered exit table

product flow

Technical drawing MCB-2 nominal width 1300 mm

Optional

Option:Safety Fences

Option:Safety Fences

Strap CoilOperator Panel

Operator Panel