mcs flexible transactional system - add-jet
TRANSCRIPT
FTS - Flexible Transactional System
www.mcspro.com
MCS Also Offers:
InkjetPrinters
DigitalPresses
CameraSystems
Corporate Office : 8101 Cessna Ave, Gaithersburg, MD 20879Midwest Office : 694 Veterans Parkway, Unit H, Bolingbrook, Il 60440Call 800-728-0154 www.mcspro.com
Y315
2 3 4 5 6 ZX0B
Operator
ZX50C
10x13 FSF
Ser
vo
ZX50B
10x13 FSF
Ser
vo
ZX50B
10x13 FSF
Ser
vo
ZX50B
10x13 FSF
Ser
vo
ZX50B
10x13 FSF
Ser
vo
ZX50A
10x13 FSF
Ser
vo
FL7E Shingling Conveyor
10'-3/4"
14'-2
3/4
"
26'-8 7/8"
Buffer
36K HiCap Y250Y203A Y208
Dual Accum/FolderY25A
Y23E
MSE Power Requirements:- 208VAC (+10% / ‐10%), Three Phase, 50 Amp a 4 wireconnection (L1, L2, L3, Earth) 60 Hz
- System electrical requirements will vary, based on theapplication. Peripheral equipment requires additionalreceptacles at the installation site (120 V, 60 Hz, 20A)
- Customer supplying main circuit breaker shall have surgeprotection rated for motor loads and typically at least 10times the rated current of the machine (50 amps).
Supplied Power Plug for 4 wire Delta:
- NEMA 15-50P (Hubbell 8451C or equivalent),- requires a NEMA 15-50R receptacle (Hubbell 8450A
or equivalent)
Network Requirements:Ethernet Cat5e - RJ45 Connector
MSE Air Requirements:4.25 CFM @ 70 psi5 Microns Particulate Filtration required
MCS Flexible Transactional System
The Pitney Bowes Flexible Transactional System is a high-speed transactional inserter designed for professional transactional service bureaus. The FTS starts out as a factory remanufactured inserter; re-engineered for flexibility and reliability. The FTS offers up to twice the production rates of standard swing arm inserters.
Designed for SuccessStandard options include • 36,000 cycle input folder • Six Servo friction feed feeders• 2D barcode camera• #10 to flat envelope sizes• Selectable feeders• Cycling speeds up to 12,000 pieces per hour • Tracking system for match mailings and read and print (2nd camera and inkjet optional)
OptionsIn-Line Inkjets - All MCS inkjet models including Process Color are available on the FTSIn-Line Meter - The Pitney Bowes Infinity MeterFeeder Cameras- For match mailings
Service OptionsIn the transactional service bureau industry, you need flexibility and competitive cost to stay ahead. MCS offers factory training for self-maintenance, shared maintenance and full maintenance contracts.
One system, two feeders equals unparalleled benefits• Automated double
detect feature eliminates manual fine-tuning and alerts operators to over feeds
• Rapid job recovery with easy to read error messaging
• Servo-powered modular feeder design allows for easy off-line service – increasing uptime up to 95%
• Flexibility for both face-down and face-up scanning ensures insert integrity
Extreme FlexibilityExpand your mailing services capabilities and achieve a lower cost per mail piece for unparalleled productivity across your entire mail operation. The FTS gives you unmatched flexibility:
• Application Flexibility – Process letters and/or flats, rapid job set up and change over between applications, run single or multiple merging print streams
• Enclosure Flexibility – Friction enclosure feeders can process the widest range of materials from single panel glossy coupons, to CDs to stitched booklets to 401K onion skin reports and credit card affixed carriers
• Collation Flexibility – Process low to high page count applications from 1-100+ pages, optional integration of stitching and broker fold capabilities
• High powered vacuum-assist opening – for consistent, high-speed insertion
• Mail Piece Finishing Flexibility – Process the widest range of envelopes from #10 to 10”x13” flats, ranging from glassine window envelopes to open-ended and side seams, optional add-ons for envelope printing and scanning integrity, zip break sorting and more
• Less sensitive to deformed envelopes eliminating the high cost associated with discarding envelopes due to improper packaging or storage
Output Options - for increased productivity and profitability• DM Infinity™ Series digital mailing system – drives
productivity with meter, permit and graphics printing • Edge marking – visually identifies mail breaks to
speed tray fulfillment • Scanning – verifies job accuracy and provides closed-
loop mail tracking• Envelope divert module – ensures mail piece integrity• Manifesting – helps increase postal
discounts by meeting USPS® presort Standards • Ink-jet addressing – lets you personalize mail pieces
and address envelopes • Zip sort – presorts mail for faster traying • Output mail verification – quickly reconciles jobs
with automated reports
The FTS is perfect for both your direct mail and transaction applications. It handles the widest variety of inserts, envelopes and applications with ease – allowing for frequent changeovers with minimal downtime.
FTS High-Speed Transactional Inserter One Platform To Run #10 up to Flats!
Modular Rotary and Friction Feeders
Phone 800.728.0154 or visit www.mcspro.com today!
Features Description9X12 Friction Servo Feeders 6Input Folder Feeder Cycle Speed Per Hour
36,000
2D Barcode Read in Input Yes 1D Barcode Read in Input Yes OMR Read in Input Yes Collation on #10 Max Page (depending on paper weight)
7
Collation on 6X9 Max Page (depending on paper weight)
10
Collation on Flat Max Page with subset (depending on paper weight)
100
Cycle Top Speed per Hour #10 Envelopes 12,000 Cycle Top Speed per Hour Flats 9,000 Envelopes
9,000
Selective Pocket in all 6 Pockets YesInkjet Optional YesIn-line Meter Optional YesAutomatic Double Detect YesZIP Sort Conveyor Break Yes