LESSON PLANLP: ME2404

Revision No:00

Date: 30.06.2011

Sub Code&Name: ME2404 COMPUTER AIDED

SIMULATION AND ANALYSIS LABORATORY Branch: Mechanical engineering SEMESTER: VII

Objective: To have an hands-on experience with softwares like ANSYS and C/MAT LAB. To simulate the real time problems by using these softwares and also to understand the application of analysis packages.

LIST OF EXPERIMENTSSession duration : 150 Minutes

All the students do the same exercise in every session. Exercises shall be done as per the order below.

(A) ANSYS EXERCISES1. Stress analysis of a plate with a circular hole.2. Stress analysis of rectangular L bracket3. Stress analysis of an axi-symmetric component4. Stress analysis of beams (Cantilever, Simply supported, Fixed ends)5. Mode frequency analysis of a 2 D component6. Mode frequency analysis of beams (Cantilever, Simply supported, Fixed

ends)7. Harmonic analysis of a 2D component8. Thermal stress analysis of a 2D component 9. Conductive heat transfer analysis of a 2D component10.Convective heat transfer analysis of a 2D component11. Contact Analysis (Additional exercise)

(B) SIMULATION EXERCISES1. Simulation of Air conditioning system with condenser temperature and

evaporator temperatures as input to get COP using C /MAT Lab.2. Simulation of Hydraulic / Pneumatic cylinder using C / MAT Lab.3. Simulation of cam and follower mechanism using C / MAT Lab.

Prepared by Approved by

Signature

NameMr.M.Prem Ananth &

Mr.A.Arockia Selvakumar Dr.N.Nallusamy

Designation Asst. Professor Prof.&HOD/Mechanical

Date 30/06/2011 30/06/2011