measured demand emissions over control area excluding … · 2018-02-10 · cc 4501, 4505 (gmc...
TRANSCRIPT
Settlements and Billing
Configuration Guide: Measured Demand Emissions
Over Control Area Excluding External Exports
Pre-calculation
Version 5.32b
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 2 of 31
Table of Contents
1. Purpose of Document 3
2. Introduction 3
2.1 Background 3 2.2 Description 8
3. Charge Code Requirements 9
3.1 Business Rules 9 3.2 Predecessor Charge Codes 12 3.3 Successor Charge Codes 12 3.4 Inputs – External Systems 12 3.5 Inputs - Predecessor Charge Codes or Pre-calculations 14 3.6 CAISO Formula 17 3.7 Outputs 23
4. Charge Code Effective Date 31
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 3 of 31
1. Purpose of Document
The purpose of this document is to capture the requirements and design specification for a SaMC Charge Code in one document.
2. Introduction
2.1 Background
In the allocation of various payment and charges, the amounts are divided among Business Associates (BAs) in proportion to their relative contribution to the overall Measured Demand quantity (in MWh) over which the allocation is performed. Thus, an allocation of payment or charges requires the following two components calculated for the particular time period over which the allocation is performed:
(1) the overall metered CAISO Demand plus Real-Time Interchange export schedules in the grid sector or area over which the allocated payments and charges apply and
(2) the contribution of each Business Associate to the overall CAISO Demand plus Real-Time Interchange export schedules referenced in the prior item.
To provide the Measured Demand quantities that are used in multiple Charge Code calculations that allocate various payments or charges, the CAISO implements a set of Pre-calculation processes, referred to as Measured Demand Pre-calculations, to calculate particular Measured Demand quantities. There are five (5) Measured Demand Pre-calculation configurations in which an overall Measured Demand quantity is calculated. The five Pre-calculations differ by the composition of the Loads and exports that are included in their Measured Demand outputs. The Measured Demand Pre-calculation process configurations, the Load Demand resources and export composition of their outputs, and the associated output frequency (10-minute, hourly, etc.) are identified as follows:
Measured Demand Pre-calculation Configurations
Name Output Composition and Frequency Dependent Allocation
Charge Codes
MD over Control Area Pre-calculation
Composition: Measured Demand:
The sum (as a negative value) of all
(a) metered CAISO Demand
(b) Real-Time Interchange export schedules
Net MSS Measured Demand:
CC 6474 - Real Time Unaccounted for Energy Settlement
CC 6475 – Real Time Uninstructed Imbalance Energy Settlement
CC 6477 - Real Time Imbalance Energy Offset
Formatted: Highlight
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 4 of 31
Measured Demand Pre-calculation Configurations
Name Output Composition and Frequency Dependent Allocation
Charge Codes
The lesser of
(a) zero (0)
or the net value defined as
(b) the sum of Meter Data(as a negative value) for Demand of all Load and other non-export Demand resources Loads internal to an MSS
plus (+) the sum of
(c) Meter Data representing Generation of all Generating Units for the MSS
to which lesser value is added
(d) the sum of all of the MSS Real-Time Interchange export schedules (as a negative value).
Frequency:
10-minute, hourly, daily
CC 6480 - Excess Cost Neutrality Allocation
CC 6636 - IFM Bid Cost Recovery Tier 1 Allocation
CC 6637 - IFM Bid Cost Recovery Tier 2 Allocation
CC 6678 - Real Time Bid Cost Recovery Allocation
CC 6774 - RT Congestion Offset
CC 6790 – CRR Balancing Account
CC 6806 - Day Ahead Residual Unit Commitment (RUC) Tier 1 Allocation
CC 6807 - Day Ahead Residual Unit Commitment (RUC) Tier 2 Allocation
CC 6947 - IFM Marginal Losses Surplus Credit Allocation
CC 550 – Monthly FERC Fee Settlement
CC 551 – Annual FERC Fee Settlement
CC 4501, 4505 (GMC Variants)
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 5 of 31
Measured Demand Pre-calculation Configurations
Name Output Composition and Frequency Dependent Allocation
Charge Codes
CC 4989 – Daily Rounding Adjustment Allocation
CC 4999 – Monthly Rounding Adjustment
CC 6457 – Declined Hourly Pre-Dispatch Penalty Allocation
CC 7056 – Flexible Ramp Cost Allocation
CC 7879 – Monthly Significant Event ICPM Allocation
CC 8999 – Neutrality Adjustment
MD over Control Area Excl MSS Energy Pre-calculation
Composition: Measured Demand:
The sum (as a negative value) of all
(a) metered CAISO Demand
(b) Real-Time Interchange export schedules
The overall Measured Demand output quantity excludes Energy from MSS entities.
Frequency:
10-minute and monthly
CC 1302 - Long-Term Voltage Support Allocation
CC 1303 - Supplemental Reactive Energy Allocation
MD Emissions over Control Area Excl External Exports Pre-calculation
Composition: Measured Demand (in-state):
The sum (as a negative value) of all
(a) metered CAISO Demand
(b) in-state Real-Time Interchange export schedules
The sum excludes CAISO-external exports and any external contractual
CC 591 – Emissions Cost Recovery
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 6 of 31
Measured Demand Pre-calculation Configurations
Name Output Composition and Frequency Dependent Allocation
Charge Codes
Transmission Loss adjustments.
Net MSS Measured Demand (in-state):
The lesser of
(a) zero (0)
or the net value defined as
(b) the sum of Meter Data (as a negative value) for Demand of all Load and other non-export Demand resources Loads internal to an MSS
plus (+) the sum of
(c) Meter Data representing Generation of all Generating Units for the MSS
to which lesser value is added
(d) the sum of all of the MSS in-state Real-Time Interchange export schedules (as a negative value).
The sum excludes CAISO-external exports and any external contractual Transmission Loss adjustments.
Frequency:
Monthly
MD Black Start Excl Exports Pre-calculation
Composition: Metered CAISO Demand:
the sum of all metered CAISO Demand (as a negative value).
Net MSS Demand:
The greater of
(a) zero (0)
or the net value defined as
CC 1353- Black Start Energy Allocation
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 7 of 31
Measured Demand Pre-calculation Configurations
Name Output Composition and Frequency Dependent Allocation
Charge Codes
(b) the sum of Meter Data (as a negative value) for Demand of all Load and other non-export Demand resources Loads internal to an MSS,
plus (+) the sum of
(c) Meter Data representing Generation of all Generating Units for the MSS.
Frequency:
Hourly
MD over Control Area Excl Transmission Loss Adjustment Pre-calculation
Composition: Measured Demand:
The sum (as a negative value) of all
(a) metered CAISO Demand
(b) Real-Time Interchange export schedules
The calculated value excludes contractual Transmission Loss adjustments.
Net MSS Measured Demand:
The greater of
(a) zero (0)
or the net value defined as
(b) the sum of Meter Data for Demand (as a negative value) of all Load and other non-export Demand resources Loads internal to an MSS
plus (+) the sum of
(c) Meter Data representing Generation of all Generating Units for the MSS
to which lesser value is added
(d) the sum of all of the MSS Real-
CC 6977 – Allocation of Transmission Loss Obligation Charge for Real Time Schedules under Control Agreement
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 8 of 31
Measured Demand Pre-calculation Configurations
Name Output Composition and Frequency Dependent Allocation
Charge Codes
Time Interchange export schedules (as a negative value).
The calculated value excludes contractual Transmission Loss adjustments.
Frequency:
10-minute and Hourly
Some of the Measured Demand configurations listed above recognize exemptions to the calculation for various Business Associates and resources. In some instances a Measured Demand configuration may produce multiple outputs, each one recognizing a particular exemption or set of exemptions. For each Measured Demand calculation, its exemptions are determined and defined by the requirements of the allocations in which the Measured Demand Pre-calculation outputs are employed.
All of the dependent allocation charge codes listed in the above Measured Demand Pre-calculation configuration summary table do not necessarily use the entire set of Measured Demand output components that the table associates with the charge codes. Some of the outputs used in the allocations are adjusted for exceptions as explained in the prior paragraph. Moreover some outputs used in various allocations are adjusted for various transmission-related contracts in order to exclude Measured Demand that is associated with contract rights from being used in a calculation. Additionally, based on the MRTU Tariff, special rules apply for the application of Measured Demand components for MSS entities that Load Follow, or for the allocation of Unaccounted-For-Energy (UFE). Some allocations may be based on metered CAISO Demand, not the full Measured Demand quantity. Thus, the configuration summary table above is quite simplistic and is intended to present only a top-level view of the output components of the Measured Demand Pre-calculations.
2.2 Description
Generically, the Measured Demand calculations represent the sum of metered CAISO Demand (and net MSS Demand for net-settled MSS entities) and Real-Time Interchange export schedules. Net MSS Demand is defined to be the lesser of zero (0) or the sum of Meter Data (as a negative value) for the Demand of all Load and other non-export Demand resources Loads internal to an MSS, to which is added the Meter Data representing the Generation of all MSS Generating Units (as a positive value). Depending upon the exact Measured Demand calculation, various export components are included or excluded in a summed Measured Demand output value. In the “Measured Demand over Control Area Excl Transmission Loss Adjustment” output calculations, contractual Transmission Losses are excluded as exports (where contractual Transmission Losses are defined to be operational adjustments that are scheduled as export Energy according to operating agreements between transmission
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 9 of 31
line operators and the CAISO). In Measured Demand calculations other than those of the “Measured Demand over Control Area Excl Transmission Loss Adjustment” process, the contractual Transmission Loss export Energy is included as Measured Demand. In addition to contractual Transmission Losses, the various Measured Demand Pre-calculations vary in the inclusion of out-of-state exports, or whether any exports at all are included in Measured Demand outputs. The “Measured Demand Emissions Over Control Area Excluding External Exports” outputs defined in the current document include in-state export Energy and contractual Transmission Losses Energy, but exclude out-of-state export Energy. All Measured Demand quantities for MSS entities that have selected to forgo emissions payment are excluded from the calculations, as long as their net Measured Demand quantity = 0.
Including in-state scheduled Energy Exports of the Energy types firm, nonfirm, dynamic, and wheeling as a component of Measured Demand quantity, the “Measured Demand Emissions Over Control Area Excluding External Exports” Pre-calculation calculates a set of two (2) Measured Demand outputs. Measured Demand quantities are output on a monthly basis. The outputs are expected to serve the “CC 591 - Emissions Cost Recovery” charge code, as indicated in the table of the prior section. The calculation produces each output at two levels of summation for use in allocating charges and payments. For each Business Associate (BA) a Measured Demand output appears as an allocated quantity that represents either the BA‟s overall metered CAISO Demand plus in-state Real-Time Interchange export schedule quantities or, in the case of MSS entities receiving emission payment, the BA‟s net MSS Demand plus in-state Real-Time Interchange export schedule quantities. Besides being computed on a BA basis, the Measured Demand quantity is summed over all BAs to formulate an overall value for the CAISO Control Area.
3. Charge Code Requirements
3.1 Business Rules
Bus Req
ID Business Rule
1.0
The Measured Demand Emissions over Control Area Excl External Exports shall perform a set of calculations to determine and output Measured Demand (metered CAISO Demand plus In-State Real-Time Interchange export schedules) over the CAISO Control Area.
1.1 Measured Demand shall be calculated and output as a total quantity for the overall CAISO Control Area.
1.2 Measured Demand shall be calculated and output as a total quantity for each Business Associate.
2.0 The Measured Demand outputs shall be calculated on a monthly interval basis at month-end.
3.0 The Measured Demand Emissions Over Control Area Excluding
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 10 of 31
Bus Req
ID Business Rule
External Exports Pre-calculation shall provide two types of Measured Demand outputs as stipulated in Business Rules 3.1 and 3.2 below.
3.1
For a MSS Operator who chooses not to charge the CAISO for Emissions Costs, the Measured Demand Emissions Over Control Area Excluding External Exports Pre-calculation shall provide output that presents MSS Measured Demand based on net MSS Measured Demand.
3.1.1 The net MSS Measured Demand quantity shall be input from the MSS Netting Pre-calculation process.
3.2
For a MSS Operator who chooses to charge the CAISO for Emissions Costs, the Measured Demand Emissions Over Control Area Excluding External Exports Pre-calculation shall provide output that presents MSS Measured Demand based on Metered Quantities for MSS Load Demand of Load and other non-export MSS resources plus Real-Time Interchange export schedules from the MSS.
3.3
For a UDC, the Measured Demand Emissions Over Control Area Excluding External Exports Pre-calculation shall provide output that presents Measured Demand based on Metered Quantities for Demand of Load and other non-export UDC resourcesUDC Load plus Real-Time Interchange export schedules from the UDC.
4.0
The Measured Demand Emissions Over Control Area Excluding External Exports Pre-calculation shall provide Measured Demand outputs that exclude Energy from particular combinations of Business Associate (BA) and resource values.
4.1 Exceptions shall be defined in a standing data table.
4.1.1 Exceptions shall be organized in the standing data table as “exception sets”.
4.1.2 An exception set shall be used to calculate at most one set of Measured Demand outputs.
4.1.3 Multiple exception sets may be employed to calculate a set of Measured Demand outputs.
4.1.4 Exception flag inputs shall be provided for each exception set in order to indicate when an exception condition within the exception set is valid.
4.1.5 The current implementation of the Measured Demand Emissions Over Control Area Excluding External Exports shall provide for two (2) exception sets, referred to as “Exceptions #1” and “Exceptions #2”.
4.1.6 Each exception set shall be effective-dated (with a start data and end date) to indicate the period over which the exception set is in effect.
Formatted: Highlight
Formatted: Highlight
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 11 of 31
Bus Req
ID Business Rule
5.0
The Measured Demand Emissions Over Control Area Excluding External Exports shall provide Measured Demand outputs that exclude the transmission rights (in MWh) associated with particular Business Associate (BA) values.
6.0
The Measured Demand Emissions Over Control Area Excluding External Exports shall include in its Measured Demand outputs the Metered CAISO Demand quantities (in MWh) for Qualifying Facility (QF) entities that are associated with particular Business Associate (BA) values.
7.0
An MSS Operator shall make the election of whether to charge CAISO for Emissions Costs on an annual basis on November 1 for the following calendar year, which should be reflected in the Master File. (Fact)
7.1
The current configuration‟s Measured Demand quantity output shall support a successor charge code calculation of emissions costs whereby, if the MSS Operator chooses to collect emissions cost recovery payment from the CAISO, then the Scheduling Coordinator for the MSS shall be allocated its share of the total amount of the emissions recovery payment costs incurred by CAISO based on the MSS‟s gross metered Load and Real-Time Interchange Export schedules of Energy delivered to other in-state control areas.
7.2
The current configuration‟s Measured Demand quantity output shall support a successor charge code calculation of emissions costs whereby, if the MSS Operator chooses to not Load-follow and to not collect emissions cost recovery payment from the CAISO, then the Scheduling Coordinator for the MSS shall be allocated its share of the total amount of the emissions recovery payment costs incurred by the CAISO based on the MSS‟s net metered Demand and Real-Time Interchange Export schedules to other in-state control areas.
7.3
The current configuration‟s Measured Demand quantity output shall support a successor charge code calculation of emissions recovery payment costs whereby, if the MSS Operator chooses to Load-follow and to not collect emissions cost recovery payment from the CAISO, then the Scheduling Coordinator for the MSS shall be allocated its share of the total amount of the emissions recovery payment costs incurred by the CAISO based on the MSS‟s Net Negative Uninstructed Deviation.
7.3.1
If the MSS Operator chooses to Load-follow and to not collect emissions cost recovery payment from the CAISO, the Measured Demand quantity attributed to the MSS shall be deemed to equal 0 in the Measured Demand output provided to the successor charge code in which emissions recovery payment costs are calculated.
Formatted: Highlight
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 12 of 31
Bus Req
ID Business Rule
8.0
The current configuration‟s Measured Demand quantity output shall support a successor charge code calculation of emissions costs whereby the Scheduling Coordinator for a UDC shall be allocated its share of the total amount of the emissions recovery payment costs incurred by CAISO based on the UDC‟s gross metered Load and Real-Time Interchange Export schedules of Energy delivered to other in-state control areas.
9.0 PTB Charge Adjustment does not apply to the Measured Demand Emissions over Control Area Excl External Exports process. (Fact)
3.2 Predecessor Charge Codes
Charge Code/ Pre-calc Name
ETC, TOR, CVR Quantity Pre-calculation
MSS Netting Pre-calculation
System Resource Deemed Delivered Energy Pre-calculation
3.3 Successor Charge Codes
Charge Code/ Pre-calc Name
CC 591 – Emissions Cost Recovery
3.4 Inputs – External Systems
Attributes that are listed for a variable name in the table below, but are not described in the associated description are incidental to and do not materially participate in the calculations of Section 1.1 herein.
Row
# Variable Name Description
1.0 MeasuredDemandMinimumLimit md
A constant value (in MWh as a negative value), provided as standing data input, that Measured Demand should not be greater than. The input is effective-dated to provide the date range over which the input‟s value applies.
2.0 MeasuredDemandEmissio Flag value (a binary 0-1 indicator) derived by
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 13 of 31
Row
# Variable Name Description
nsControlAreaExceptions1Flag
Brt
the data mapping process from the Exceptions #1 standing data input, that indicates whether a condition from Exceptions #1 is met (true) for a given combination of Business Associate B and resource ID r values of resource type t. When an Exceptions #1 condition is true, the Measured Demand Emissions Over Control Area Excluding External Exports Pre-calculation shall exclude any associated metered CAISO Demand, Export Energy or net MSS Measured Demand for the resource from the calculation of Measured Demand outputs.
3.0 BAMeasuredDemandInStateExceptions1Flag
B
Flag value (a binary 0-1 indicator) derived by the data mapping process from the Exceptions #1 standing data input, that indicates whether a condition from Exceptions #1 is met (true) for a given Business Associate B value independent of any Resource. When an Exceptions #1 condition is true for the given value of B, the Measured Demand Emissions Over Control Area Excluding External Exports Pre-calculation shall exclude any associated metered CAISO Demand, Export Energy or net MSS Measured Demand for the BA from the calculation of Measured Demand outputs.
4.0
MeasuredDemandEmissionsControlAreaExceptions2Flag
B
Flag value, derived by the data mapping process from the Exceptions #2 standing data input, that indicates whether a condition from Exceptions #2 is met (true) for a given Business Associate. When an Exceptions #2 condition is true, the Measured Demand Emissions Over Control Area Excluding External Exports shall exclude any associated transmission rights Energy from the calculation of the CAISOTotalMonthlyMeasuredDemandControlAreaEmissionsQty
m and
BAMonthlyMeasuredDemandControlAreaEmissionsQty
Bm Measured Demand outputs.
5.0 BAMonthlyQFMeteredCAI Quantity (in MWh as a negative value)
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 14 of 31
Row
# Variable Name Description
SODemand Bm
derived by the data mapping process from the QF Metered CAISO Demand Quantities standing data, that represents the Metered CAISO Demand attributed to all QF entities associated with Business Associate B and Trading Month m.
3.5 Inputs - Predecessor Charge Codes or Pre-calculations
Attributes that are listed for a variable name in the table below, but are not described in the associated description are incidental to and do not materially participate in the calculations of Section 1.1 herein.
Row # Variable Name Predecessor Charge Code/
Pre-calc Configuration
1.0 IntervalNetMSSMeasuredDemandIn-StateQuantity
BuT’I’M’AA’W’VL’mdhi
Input from MSS Netting Pre-calculation. Total interval Net MSS Measured Demand quantity (in MWh as a negative value), where Energy Exports are destined for non-CAISO in-state Control Areas, as scheduled by Business Associate B for MSS u of entity type T‟ and gross/net settlement type I‟, having MSS Emissions Pay Flag W‟, RUC Participation Flag V, and Load Following Selection Flag L‟, for Aggregated Pricing Node A of Aggregated Pricing Node Type A‟, for MSS “bubble” M‟, where T‟ = MSS. The input quantity applies to (10-minute) Settlement Interval i of Trading Hour h, Trading Day d and Trading Month m. The input excludes out-of-state export Energy.
2.0
SettlementIntervalDeemedDeliveredInterchangeEnergyQuantity
BrtEuT’I’Q’M’AA’F’R’pPW’QS’d’Nz’OVv
Hn’L’mdhi
This input originates in the System Resource Deemed Delivered Energy Pre-calculation and applies to all Energy types, as denoted by the „E‟ attribute.
The derived input (in MWh) represents Real-Time Interchange export schedule Energy as Deemed-Delivered Energy quantity in MWh, calculated for Business associate B and 10-minute Settlement Interval i of Trading Hour h, Trading Month m and Trading Day d. The
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 15 of 31
Row # Variable Name Predecessor Charge Code/
Pre-calc Configuration
Energy quantity input consists of Energy of Energy type E from resource r, having resource type t, Entity Component Type F‟ and Entity Component Subtype S‟, and that is associated with external Control Area Q‟ and UDC/MSS u having entity type T‟, gross/net settlement type I‟ and MSS Emissions Pay Flag W‟. The input value is positive for Energy Imports and negative for Energy Exports.
In the derivation of outputs for the Measured Demand Emissions Over Control Area Excluding External Exports Pre-calculation, the resource type t is restricted to the value „ETIE‟ and the external Control Area Q‟ is required to be a non-CAISO in-state Control Area. In order for the pre-calculation process to determine whether or not an external Control Area Q‟ lies within California, it is envisioned that the data mapping process reference the Master File. For each Q‟ value the Master File is expected to indicate whether the value represents a California in-state Control Area or an external Control Area outside California. The in-state or external status of Q‟ shall be reflected by the SettlementIntervalDeemedDeliveredInterchangeEnergyQuantity
BrtEuT‟I‟Q‟M‟AA‟F‟R‟pPW‟QS‟d‟Nz‟OVvHn‟L‟mdhi input‟s S‟ attribute. An identified in-state Control Area should be identified by the condition S‟ = „INTIE‟.
3.0
Op_Agreement_Export_Loss_Allocation_Quantity
BrtEuT’I’Q’M’AA’F’R’pPW’QS’d’Nz’OVv
Hn’L’mdhi
This input originates in the “Pre-Calc Allocation of Transmission Losses under Operating Agreements” pre-calc process.
The input (in MWh as a negative value) represents operating agreement export losses quantity (billable) in MWh, calculated for Business Associate B and 10-minute Settlement Interval i of Trading Hour h, Trading Month m and Trading Day d. The Energy quantity
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 16 of 31
Row # Variable Name Predecessor Charge Code/
Pre-calc Configuration
input consists of Energy of Energy type E from resource r, having resource type t, Entity Component Type F‟, Entity Component Subtype S‟, external Control Area Q‟, UDC/MSS u, entity type T‟, gross/net settlement type I‟ and MSS Emissions Pay Flag W‟.
In the Measured Demand Emissions Over Control Area Excluding External ExportsPre-calculation, resource type t is restricted to the value „ETIE‟.
4.0
BAResIntervalMeteredCAISODemandQuantity
BrtuT’I’Q’M’AA’R’pPW’Qd’Nz’VvHn’L’m
dhi
An output from the MSS Netting Pre-calculation, the BAResIntervalMeteredCAISODemandQuantity BrtuT‟I‟Q‟M‟AA‟R‟pPW‟Qd‟Nz‟VvHn‟L‟mdhi input presents ten -minute CAISO Metered Demand (in MWh as a negative value) that is attributable to resource ID r of Resource Type t, and to Business Associate B and UDC/MSS u (having Entity Type T‟, MSS Gross/Net Energy Settlement Type I‟, MSS Emissions Pay Flag W‟, RUC Participation Flag V and Load Following Selection Flag L‟) for Settlement Interval i of Trading Hour h, Trading Day d and Trading Month m. Input attributes that are not mentioned in the current input description are incidental to the CT calculations that appear herein.
5.0 SettlementIntervalResourceContractMDforECA
BrtQ‟QF‟S‟z‟hi
An output from the ETC, TOR, CVR Quantity Pre-calculation that presents the transmission right-exempted Measured Demand quantity (in MWh as a negative value) for contract type z‟ that is associated with resource ID r, resource type t, Business Associate B, Entity Component Type F‟, Entity Component Subtype S‟, Intertie ID Q, external Control Area Q‟, Settlement Interval i, Trading Hour h and Trading Month m.
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 17 of 31
3.6 CAISO Formula
3.6.1 Measured Demand Emissions Quantity over CAISO Control Area (by Settlement Month)
CAISOTotalMonthlyMeasuredDemandControlAreaEmissionsQty m =
B
BAControlAreaMonthlyTotalMeasuredDemandQuantity_Ex_InState Bm
3.6.2 Measured Demand Emissions Quantity over CAISO Control Area (by BA and Settlement Month)
Where
BAControlAreaMonthlyTotalMeasuredDemandQuantity_Ex_InState Bm = BAMonthlyNonQFMeasuredDemandControlAreaEmissionsQty
Bm +
BAMonthlyQFMeteredCAISODemand Bm
3.6.3 Measured Demand Emissions Quantity without Metered QF Demand over CAISO Control Area (by BA and Settlement Month)
Where
BAMonthlyNonQFMeasuredDemandControlAreaEmissionsQty Bm =
'LV'W'I'Tu
BAUDCMonthlyNonQFMeasuredDemandControlAreaEmission
sQty BuT’I’W’VL’m
Where
T‟ = „UDC‟ Or W‟ = „YES‟ Or L‟ = „NO‟
3.6.4 Measured Demand Emissions Quantity without Metered QF Demand over CAISO Control Area (by BA, MSS Selections and Settlement Month)
Where
BAUDCMonthlyNonQFMeasuredDemandControlAreaEmissionsQty BuT’I’W’VL’m
=
d
BADailyNonQFMeasuredDemandControlAreaEmissionsQty BuT’I’W’VL’md
3.6.5 Measured Demand Emissions Quantity over CAISO Control Area (by BA and Settlement Day)
Where
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 18 of 31
BADailyNonQFMeasuredDemandControlAreaEmissionsQty BuT’I’W’VL’md =
h
BAHourlyMeasuredDemandControlAreaEmissionsQty BuT’I’W’VL’mdh
3.6.6 Measured Demand Emissions Quantity over CAISO Control Area (by BA and Settlement Hour)
Where
BAHourlyMeasuredDemandControlAreaEmissionsQty BuT’I’W’VL’mdh =
HourlyTotalMeteredCAISODemandMinusRightsQuantity_MDEmissionsOverCAExclExtExports BuT’I’W’VL’mdh
+
HourlyExportMinusRightsIn-StateQuantity_ MDEmissionsOverCAExclExtExports
BuT’I’W’VL’mdh +
HourlyTotalNetMSSMeasuredDemandMinusRightsIn-StateQuantity_MDEmissionsOverCAExclExtExports
BuT’I’W’VL’mdh
3.6.6.1 Where
HourlyTotalMeteredCAISODemandMinusRightsQuantity_MDEmissionOverCAExclE
xtExports BuT’I’W’VL’mdh =
i
BAControlAreaSettlementIntervalMeteredCAISODemandQuantityLessContractLoad_Ex_InStateBAControlAreaSettlementIntervalMeteredNonExportDemandQuantityLessContract_Ex_InState
BuT’I’W’VL’mdhi
3.6.6.1.1 Where
BAControlAreaSettlementIntervalMeteredCAISODemandQuantityLessContractLoad_Ex_InStateBAControlAreaSettlementIntervalMeteredNonExportDemandQuantityLessContract_Ex_InState
BuT’I’W’VL’mdhi =
Min(tr
(BAResSettlementIntervalMeteredCAISODemandQuantity_MDEm
issionsOverCAExclExtExports BrtuT’I’W’VL’mdhi -
BAResourceSettlementIntervalLoadRightsQty_MDEmissionsOverCAExclExtExportsBAResourceSettlementIntervalNonExportDemandRightsQty_MDEmissionsOverCAExclExtExports Brtmdhi ), 0)
3.6.6.1.1.1 Where
BAResSettlementIntervalMeteredCAISODemandQuantity_MDEmissionsOverCAExclExtExports BrtuT’I’W’VL’mdhi =
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 19 of 31
'AA'M'Q 'dQPp'R 'nHv'zN
BAResIntervalM
eteredCAISODemandQuantity BrtuT’I’Q’M’AA’R’pPW’Qd’Nz’VvHn’L’mdhi
3.6.6.1.1.1.1 Where
t = „LOAD‟
3.6.6.1.1.1.23.6.6.1.1.1.1 And Where
(
T‟ <> „MSS‟
3.6.6.1.1.1.33.6.6.1.1.1.2 Or
T‟ = „MSS‟ And W‟ = „YES‟
)
3.6.6.1.1.1.43.6.6.1.1.1.3 And Where
MeasuredDemandEmissionsControlAreaExceptions1Flag Brt
<>True
3.6.6.1.1.1.53.6.6.1.1.1.4 And Where
BAMeasuredDemandInStateExceptions1Flag B
<>True
3.6.6.1.1.2 And Where
If MeasuredDemandEmissionsControlAreaExceptions2Flag B = „True‟
Then (
3.6.6.1.1.2.1 BAResourceSettlementIntervalLoadRightsQty_MDEmissionsOverCAExclExtExportsBAResourceSettlementIntervalNonExportDemandRightsQty_MDEmissionsOverCAExclExtExports Brtmdhi =
'z'S'FQ'Q
SettlementIntervalResourceContractMDforECA BrtQ’QF’S’z’hi
3.6.6.1.1.2.1.1 Where
t <>= „LOAD‟ETIE‟
)
Else
(
3.6.6.1.1.2.2 BAResourceSettlementIntervalLoadRightsQty_MDEmissionsOverCAExclExtExportsBAResourceSettlementIntervalNonExportDemandRightsQty_MDEmissionsOverC
Formatted: Highlight
Formatted: Highlight
Formatted: Highlight
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 20 of 31
AExclExtExports Brtmdhi = 0
)
3.6.6.2 And Where
HourlyExportMinusRightsIn-StateQuantity_ MDEmissionsOverCAExclExtExports
BuT’I’W’VL’mdh =
i
BAControlAreaSettlementIntervalExportLessContractExportsQuantity_Ex_InSt
ate BuT’I’W’VL’mdhi
3.6.6.2.1 Where
BAControlAreaSettlementIntervalExportLessContractExportsQuantity_Ex_InState BuT’I’W’VL’mdhi = Min
(
'Qtr
(BAControlAreaSettlementIntervalExportQuantity_Ex_InState
BrtuT’I’Q’W’VL’mdhi - BAControlAreaSettlementIntervalContractExportQuantity_Ex_InState BrtQ’mdhi ),
0)
3.6.6.2.1.1 Where
BAControlAreaSettlementIntervalExportQuantity_Ex_InState
BrtuT’I’Q’W’VL’mdhi =
'AA'ME Pp'R'F 'zN'd'SQ 'nHvO
(SettlementIntervalDeemedDeliveredInterchangeEnergyQuantity
BrtEuT’I’Q’M’AA’F’R’pPW’QS’d’Nz’OVvHn’L’mdhi +
Op_Agreement_Export_Loss_Allocation_Quantity
BrtEuT’I’Q’M’AA’F’R’pPW’QS’d’Nz’OVvHn’L’mdhi)
3.6.6.2.1.1.1 Where
t = „ETIE‟
3.6.6.2.1.1.2 And Where
(
T‟ <> „MSS‟
3.6.6.2.1.1.3 Or
T‟ = „MSS‟ And W‟ = „YES‟
)
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 21 of 31
3.6.6.2.1.1.4 And Where
MeasuredDemandEmissionsControlAreaExceptions1Flag Brt
<>True
3.6.6.2.1.1.5 And Where
BAMeasuredDemandInStateExceptions1Flag B
<>True
3.6.6.2.1.1.6 And Where
E In („FIRM‟, „NFRM‟, „WHEEL‟, „DYN‟, „UCTG‟)
3.6.6.2.1.1.7 And Where
S‟ = „INTIE‟
3.6.6.2.1.2 And Where
If MeasuredDemandEmissionsControlAreaExceptions2Flag B = „True‟
Then (
3.6.6.2.1.2.1 BAControlAreaSettlementIntervalContractExportQuantity_Ex_InState
BrtQ’mdhi = 'z'S'FQ
SettlementIntervalResourceContractMDforECA BrtQ’QF’S’z’hi
3.6.6.2.1.2.1.1 Where
t = „ETIE‟ And S‟ = „INTIE‟
)
Else
(
3.6.6.2.1.2.2 BAControlAreaSettlementIntervalContractExportQuantity_Ex_InState
BrtQ’mdhi = 0
)
3.6.6.3 And Where
HourlyTotalNetMSSMeasuredDemandMinusRightsIn-StateQuantity_
MDEmissionsOverCAExclExtExports BuT‟I‟W‟VL‟mdh
= i
BAControlAreaSettlementIntervalNOOptedMSSNetMeasuredDemandLessContractExportsQuantity_Ex_InState BuT‟I‟W‟VL‟mdhi
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 22 of 31
3.6.6.3.1 Where
BAControlAreaSettlementIntervalNOOptedMSSNetMeasuredDemandLessContractExportsQuantity_Ex_InState BuT‟I‟W‟VL‟mdhi = Min( (BASettlementIntervalNetMSSMeasuredDemandIn-StateQuantity_MDEmissionsOverCAExclExtExports
BuT’I’W’VL’mdhi –
BASettlementIntervalContractLoadQuantity_Ex_InStateBASettlementIntervalContractNonExportDemandQuantity_Ex_InState Bmdhi - BASettlementIntervalContractExportQuantity_Ex_InState Bmdhi), 0)
3.6.6.3.1.1 Where
BASettlementIntervalNetMSSMeasuredDemandIn-StateQuantity_MDEmissionsOverCAExclExtExports
BuT’I’W’VL’mdhi =
'AA'M
IntervalNetMSSMeasuredDemandIn-StateQuantity
BuT’I’M’AA’W’VL’mdhi
3.6.6.3.1.1.1 Where
T‟ = „MSS‟
3.6.6.3.1.1.2 And Where
W‟ = „NO‟
3.6.6.3.1.1.3 And Where
BAMeasuredDemandInStateExceptions1Flag B
<>True
3.6.6.3.1.2 And Where
BASettlementIntervalContractLoadQuantity_Ex_InStateBASettlementIntervalContractNonExportDemandQuantity_Ex_InState Bmdhi =
tr
BAResourceSettlementIntervalLoadRightsQty_MDEmissionsOver
CAExclExtExportsBAResourceSettlementIntervalNonExportDemandRightsQty_MDEmissionsOverCAExclExtExports Brtmdhi
3.6.6.3.1.3 And Where
BASettlementIntervalContractExportQuantity_Ex_InState Bmdhi =
'Qtr
BAControlAreaSettlementIntervalContractExportQuantity_Ex_I
nState BrtQ’mdhi
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 23 of 31
3.7 Outputs
Output
Req ID Name Description
1
In addition to any outputs listed below, all inputs shall be included as outputs.
All inputs.
2
CAISOTotalMonthlyMeasuredDemandControlAreaEmissionsQty
m
Measured Demand quantity (in MWh as a negative value) calculated over the CAISO Control Area for Trading Month m. The Energy output excludes the Demand quantity of resources and/or Business Associates (BAs) that are identified through exception set “Exceptions #1” of the Measured Demand Emissions Over Control Area Excluding External Exports Pre-calculation. For BAs of exception set “Exceptions #2” that have TOR contract-established transmission rights, the Demand Energy represented by the output will be reduced by an applicable contract-designated quantity.
3
BAControlAreaMonthlyTotalMeasuredDemandQuantity_Ex_InState
Bm
Measured Demand quantity (in MWh as a negative value) calculated over the CAISO Control Area for for BA B for Trading Month m. The output includes QF Demand and excludes the Demand quantity of resources and/or Business Associates (BAs) that are identified through exception set “Exceptions #1” of the Measured Demand Emissions Over Control Area Excluding External Exports Pre-calculation. For a BA of exception set “Exceptions #2” that have TOR contract-established transmission rights, the BA‟s associated Demand quantity represented by the output will be reduced by an applicable contract-designated quantity.
4 BAMonthlyNonQFMeasuredDemandControlAr
Measured Demand quantity (in MWh as a negative value) calculated over the CAISO Control Area for Business
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 24 of 31
Output
Req ID Name Description
eaEmissionsQty Bm
Associate B and Trading Month m. The Measured Demand Energy quantity excludes monthly metered QF Demand as well as the Demand of MSS entities that have selected to Load-Follow but have not selected to participate in the recovery of emissions costs. Being further restrictive, the Energy output excludes the Demand quantity of resources and/or Business Associates (BAs) that are identified through exception set “Exceptions #1” of the Measured Demand Emissions Over Control Area Excluding External Exports Pre-calculation. For BAs of exception set “Exceptions #2” that have TOR contract-established transmission rights, the Demand Energy represented by the output will be reduced by an applicable contract-designated quantity.
5
BAUDCMonthlyNonQFMeasuredDemandControlAreaEmissionsQty
BuT’I’W’VL’m
Measured Demand quantity (in MWh as a negative value) calculated over the CAISO Control Area for for BA B, representing UDC/MSS u of entity type T‟ and gross/net settlement type I‟, having MSS Emissions Pay Flag W‟, RUC Participation Flag V, and Load Following Selection Flag L‟. The input quantity applies to Trading Month m. The Measured Demand Energy quantity excludes metered QF Demand. Also, the Energy output excludes the Demand quantity of resources and/or Business Associates (BAs) that are identified through exception set “Exceptions #1” of the Measured Demand Emissions Over Control Area Excluding External Exports Pre-calculation. For BAs of the pre-calculation‟s exception set “Exceptions #2” that have TOR contract-established transmission rights, the Demand Energy represented by the output will be
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 25 of 31
Output
Req ID Name Description
reduced by an applicable contract-designated quantity.
6
BADailyNonQFMeasuredDemandControlAreaEmissionsQty
BuT’I’W’VL’md
Measured Demand quantity (in MWh as a negative value) calculated over the CAISO Control Area for for BA B, representing UDC/MSS u of entity type T‟ and gross/net settlement type I‟, having MSS Emissions Pay Flag W‟, RUC Participation Flag V, and Load Following Selection Flag L‟. The input quantity applies to Trading Month m and Trading Day d. The Measured Demand Energy quantity excludes metered QF Demand. Also, the Energy output excludes the Demand quantity of resources and/or Business Associates (BAs) that are identified through exception set “Exceptions #1” of the Measured Demand Emissions Over Control Area Excluding External Exports Pre-calculation. For BAs of exception set “Exceptions #2” that have TOR contract-established transmission rights, the Demand Energy represented by the output will be reduced by an applicable contract-designated quantity.
7 BAHourlyMeasuredDemandControlAreaEmissionsQty BuT’I’W’VL’mdh
Measured Demand quantity (in MWh as a negative value) calculated for Business Associate B, representing UDC/MSS u of entity type T‟ and gross/net settlement type I‟, having MSS Emissions Pay Flag W‟, RUC Participation Flag V, and Load Following Selection Flag L‟. The input quantity is calculated for Trading Hour h, Trading Day d and Trading Month m. The Measured Demand Energy quantity excludes metered QF Demand. Also, Energy is excluded from the output quantity based on “Exceptions #1” in the way described earlier for the output entry CAISOTotalMonthlyMeasuredDemand
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 26 of 31
Output
Req ID Name Description
ControlAreaEmissionsQty m.
8
HourlyTotalMeteredCAISODemandMinusRightsQuantity_ MDEmissionsOverCAExclExtExports BuT’I’W’VL’mdh
Sum of metered CAISO Demand input values (in MWh as a negative value) for all Load and other Load non-export Demand resources r that were scheduled by Business Associate B, representing UDC/MSS u of entity type T‟ and gross/net settlement type I‟, having MSS Emissions Pay Flag W‟, RUC Participation Flag V, and Load Following Selection Flag L‟. The input quantity is calculated for Trading Hour h, Trading Day d and Trading Month m. The summed quantity is restricted to Energy from non-MSS entities or from MSS entities that have selected to receive emissions payment and excludes Energy associated with transmission contract rights..
9
BAControlAreaSettlementIntervalMeteredCAISODemandQuantityLessContractLoad_Ex_InStateBAControlAreaSettlementIntervalMeteredNonExportDemandQuantityLessContract_Ex_InState
BuT’I’W’VL’mdhi
Sum of metered CAISO Demand input values (in MWh as a negative value) that represent the Demand of all Load and other non-export Demand resourcesfor all Load resources r that were scheduled by Business Associate B, representing UDC/MSS u of entity type T‟ and gross/net settlement type I‟, having MSS Emissions Pay Flag W‟, RUC Participation Flag V, and Load Following Selection Flag L‟. The input quantity is calculated for Settlement Interval i, Trading Hour h, Trading Day d and Trading Month m. The summed quantity is restricted to Energy from non-MSS entities or from MSS entities that have selected to receive emissions payment and excludes Energy associated with transmission contract rights..
10 BAResSettlementIntervalMeteredCAISODemandQuantity_MDEmissio
Metered CAISO Demand input value (in MWh as a negative value) for Load or other Load non-export Demand
Formatted: Highlight
Formatted: Highlight
Formatted: Highlight
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 27 of 31
Output
Req ID Name Description
nsOverCAExclExtExports BrtuT’I’W’VL’mdhi
resource r of resource type t that was scheduled by Business Associate B, representing UDC/MSS u of entity type T‟ and gross/net settlement type I‟, having MSS Emissions Pay Flag W‟, RUC Participation Flag V, and Load Following Selection Flag L‟. The input quantity is calculated for Settlement Interval i, Trading Hour h, Trading Day d and Trading Month m.
11
BAResourceSettlementIntervalNonExportDemandLoadRightsQty_MDEmissionsOverCAExclExtExports Brtmdhi
Transmission Rights quantity (in MWh as a negative value) that applies to Load or other scheduled Load non-export Demand resource r of resource type t, over the CAISO Control Area for Business Associate B, Settlement Interval i, Trading Hour h, Trading Day d, and Trading Month m.
12
HourlyExportMinusRightsIn-StateQuantity_ MDEmissionsOverCAExclExtExports BuT’I’W’VL’mdh
Sum of Real-Time Deemed-Delivered Energy Export quantities (in MWh as a negative value), calculated for Business Associate B, representing UDC/MSS u of entity type T‟ and gross/net settlement type I‟, having MSS Emissions Pay Flag W‟, RUC Participation Flag V, and Load Following Selection Flag L‟. The input quantity applies to Trading Hour h, Trading Day d and Trading Month m. The summed quantity is restricted to in-state intertie export Energy from non-MSS entities or from MSS entities that have selected to receive emissions payment. The summed quantity is restricted to Energy from non-MSS entities or from MSS entities that have selected to receive emissions payment and excludes Energy associated with transmission contract rights..
13
BAControlAreaSettlementIntervalExportLessContractExportsQuantity_Ex_InState
Sum of Real-Time Deemed-Delivered Energy Export quantities (in MWh as a negative value), calculated for Business Associate B, representing UDC/MSS u of entity type T‟ and
Formatted: Highlight
Formatted: Highlight
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 28 of 31
Output
Req ID Name Description
BuT’I’W’VL’mdhi gross/net settlement type I‟, having MSS Emissions Pay Flag W‟, RUC Participation Flag V, and Load Following Selection Flag L‟. The input quantity applies to Settlement Interval i, Trading Hour h, Trading Day d and Trading Month m. The summed quantity is restricted to in-state intertie export Energy from non-MSS entities or from MSS entities that have selected to receive emissions payment. The summed quantity is restricted to Energy from non-MSS entities or from MSS entities that have selected to receive emissions payment and excludes Energy associated with transmission contract rights..
14
BAControlAreaSettlementIntervalExportQuantity_Ex_InState
BrtuT’I’Q’W’VL’mdhi
Real-Time Deemed-Delivered Energy Export quantity (in MWh as a negative value), calculated for System Resource r of resource type t. The resource is associated with Business Associate B and external Control Area Q‟, as well as with UDC/MSS u of entity type T‟ and gross/net settlement type I‟, having MSS Emissions Pay Flag W‟, RUC Participation Flag V, and Load Following Selection Flag L‟. The input quantity applies to Settlement Interval i, Trading Hour h, Trading Day d and Trading Month m.
15
BAControlAreaSettlementIntervalContractExportQuantity_Ex_InState
BrtQ’mdhi
Transmission Rights quantity (in MWh as a negative value) that applies to scheduled Energy Exports over the CAISO Control Area for Business Associate B, external Control Area Q‟, Settlement Interval i, Trading Hour h, Trading Day d, and Trading Month m.
16 < deleted >
17 < deleted >
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 29 of 31
Output
Req ID Name Description
18
HourlyTotalNetMSSMeasuredDemandMinusRightsIn-StateQuantity_ MDEmissionsOverCAExclExtExports BuT’I’W’VL’mdh
Net MSS Measured Demand quantity (in MWh as a negative value) using in-state exports and excluding exports to Control Areas outside of California, calculated for Business Associated B, representing UDC/MSS u of entity type T‟ and gross/net settlement type I‟, having MSS Emissions Pay Flag W‟, RUC Participation Flag V, and Load Following Selection Flag L‟. The input quantity applies to Trading Hour h, Trading Day d and Trading Month m. The summed quantity is restricted to Energy from non-MSS entities or from MSS entities that have selected to receive emissions payment and excludes Energy associated with transmission contract rights.
19
BAControlAreaSettlementIntervalNOOptedMSSNetMeasuredDemandLessContractExportsQuantity_Ex_InState
BuT‟I‟W‟VL‟mdhi
Net MSS Measured Demand quantity (in MWh as a negative value) using in-state exports and excluding exports to Control Areas outside of California, calculated for Business Associated B, representing UDC/MSS u of entity type T‟ and gross/net settlement type I‟, having MSS Emissions Pay Flag W‟, RUC Participation Flag V, and Load Following Selection Flag L‟. The input quantity applies to Settlement Interval i, Trading Hour h, Trading Day d and Trading Month m. The summed quantity is restricted to Energy from non-MSS entities or from MSS entities that have selected to receive emissions payment and excludes Energy associated with transmission contract rights.
20
BASettlementIntervalNetMSSMeasuredDemandIn-StateQuantity_MDEmissionsOverCAExclExtExports
BuT’I’W’VL’mdhi
Net MSS Measured Demand quantity (in MWh as a negative value) using in-state exports and excluding exports to Control Areas outside of California, calculated for Business Associated B, representing UDC/MSS u of entity type T‟ and gross/net settlement type I‟, having MSS Emissions Pay Flag
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 30 of 31
Output
Req ID Name Description
W‟, RUC Participation Flag V, and Load Following Selection Flag L‟. The input quantity applies to Settlement Interval i, Trading Hour h, Trading Day d and Trading Month m. The summed quantity is restricted to Energy from non-MSS entities or from MSS entities that have selected to receive emissions payment.
21
BASettlementIntervalContractLoadQuantity_Ex_InStateBASettlementIntervalContractNonExportDemandQuantity_E
x_InState Bmdhi
The sum of the Transmission Rights quantities (in MWh as a negative value) over all scheduled Load and other Load non-export Demand resources of the CAISO Control Area for Business Associate B, Settlement Interval i, Trading Hour h, Trading Day d, and Trading Month m.
22 BASettlementIntervalContractExportQuantity_Ex_InState Bmdhi
The sum of the Transmission Rights quantities (in MWh as a negative value) over all scheduled Energy Exports of the CAISO Control Area for Business Associate B, Settlement Interval i, Trading Hour h, Trading Day d, and Trading Month m.
23 < deleted >
Formatted: Highlight
Settlements and Billing Version: 5.2b3
Configuration Guide for: Measured Demand Emissions Over Control Area Excluding External
Exports
Date: 019/026/121
© CAISO, 2012 Page 31 of 31
4. Charge Code Effective Date
Charge Code/
Pre-calc Name
Document
Version
Effective
Start
Date
Effective
End
Date
Version Update Type
Measured Demand Emissions Over
Control Area Excluding External
Exports
5.0 04/01/09 03/31/09 Documentation Edits
Only
Measured Demand Emissions Over
Control Area Excluding External
Exports
5.1 04/01/09 05/23/10 Documentation Edits
and Configuration Impacted
Measured Demand Emissions Over
Control Area Excluding External
Exports
5.2 05/24/10 01/31/11 Documentation Edits
and Configuration Impacted
Measured Demand Emissions Over
Control Area Excluding External
Exports
5.2a 02/01/11 12/12/11 Documentation Edits
Only
Measured Demand Emissions Over
Control Area Excluding External
Exports
5.2b 12/13/11 Open0311/30/12
Documentation Edits Only
Measured Demand Emissions Over
Control Area Excluding External
Exports
5.3 0412/01/
12 Open
Documentation Edits and Configuration
Impacted
Formatted: Highlight
Formatted: Highlight
Formatted: Highlight
Formatted: Highlight
Formatted: Highlight
Formatted: Highlight